dt-bindings: Remove leading zeros from bindings notation

Improve the binding example by removing all the leading zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"`

Some unnecessary changes were manually fixed.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

4 files changed, 7 insertions, 7 deletions

diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
index 3b484380c56a..8ad556aca70b 100644
--- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
@@ -12,7 +12,7 @@ Required properties:
 		second cell holding the request line number.
 
 Example:
-	dma: dma-controller@01c02000 {
+	dma: dma-controller@1c02000 {
 		compatible = "allwinner,sun4i-a10-dma";
 		reg = <0x01c02000 0x1000>;
 		interrupts = <27>;
@@ -32,7 +32,7 @@ The three cells in order are:
 3. The port ID as specified in the datasheet
 
 Example:
-	spi2: spi@01c17000 {
+	spi2: spi@1c17000 {
 		compatible = "allwinner,sun4i-a10-spi";
 		reg = <0x01c17000 0x1000>;
 		interrupts = <0 12 4>;
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 98fbe1a5c6dd..717851407fac 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -38,7 +38,7 @@ The two cells in order are:
 2. The port ID as specified in the datasheet
 
 Example:
-spi2: spi@01c6a000 {
+spi2: spi@1c6a000 {
 	compatible = "allwinner,sun6i-a31-spi";
 	reg = <0x01c6a000 0x1000>;
 	interrupts = <0 67 4>;
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 41f0c1a07c56..66026dcf53e1 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -142,7 +142,7 @@ mcasp0: mcasp@48038000 {
 };
 
 2.
-edma1: edma@02728000 {
+edma1: edma@2728000 {
 	compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
 	reg =	<0x02728000 0x8000>;
 	reg-names = "edma3_cc";
@@ -165,13 +165,13 @@ edma1: edma@02728000 {
 	power-domains = <&k2g_pds 0x4f>;
 };
 
-edma1_tptc0: tptc@027b0000 {
+edma1_tptc0: tptc@27b0000 {
 	compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
 	reg =	<0x027b0000 0x400>;
 	power-domains = <&k2g_pds 0x4f>;
 };
 
-edma1_tptc1: tptc@027b8000 {
+edma1_tptc1: tptc@27b8000 {
 	compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
 	reg =	<0x027b8000 0x400>;
 	power-domains = <&k2g_pds 0x4f>;
diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt
index 3207ceb04d0b..abec59f35fde 100644
--- a/Documentation/devicetree/bindings/dma/zxdma.txt
+++ b/Documentation/devicetree/bindings/dma/zxdma.txt
@@ -26,7 +26,7 @@ Controller:
 Client:
 Use specific request line passing from dmax
 For example, spdif0 tx channel request line is 4
-	spdif0: spdif0@0b004000 {
+	spdif0: spdif0@b004000 {
 		#sound-dai-cells = <0>;
 		compatible = "zte,zx296702-spdif";
 		reg = <0x0b004000 0x1000>;