diff options
author | Vinod Koul <vinod.koul@intel.com> | 2017-11-14 10:36:09 +0530 |
---|---|---|
committer | Vinod Koul <vinod.koul@intel.com> | 2017-11-14 10:36:09 +0530 |
commit | 135ab7f53cfb77bd0b215b68eed006c7825ea01e (patch) | |
tree | 64ecce9f31a7b88f16851d9deaf04af0d8611205 /Documentation/devicetree/bindings/dma | |
parent | 9c6027133626efd773fa84478c5d8c9209df41f6 (diff) | |
parent | 9b3b8171f7f4ecbbc28f3c1ae60462826a5d9072 (diff) |
Merge branch 'topic/sprd' into for-linus
Kconfig and Makefile conflicts so put them in right order (sprd ones after
stm ones)
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Diffstat (limited to 'Documentation/devicetree/bindings/dma')
-rw-r--r-- | Documentation/devicetree/bindings/dma/sprd-dma.txt | 41 |
1 files changed, 41 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt new file mode 100644 index 000000000000..7a10fea2e51b --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt @@ -0,0 +1,41 @@ +* Spreadtrum DMA controller + +This binding follows the generic DMA bindings defined in dma.txt. + +Required properties: +- compatible: Should be "sprd,sc9860-dma". +- reg: Should contain DMA registers location and length. +- interrupts: Should contain one interrupt shared by all channel. +- #dma-cells: must be <1>. Used to represent the number of integer + cells in the dmas property of client device. +- #dma-channels : Number of DMA channels supported. Should be 32. +- clock-names: Should contain the clock of the DMA controller. +- clocks: Should contain a clock specifier for each entry in clock-names. + +Example: + +Controller: +apdma: dma-controller@20100000 { + compatible = "sprd,sc9860-dma"; + reg = <0x20100000 0x4000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <32>; + clock-names = "enable"; + clocks = <&clk_ap_ahb_gates 5>; +}; + + +Client: +DMA clients connected to the Spreadtrum DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each channel. +The two cells in order are: +1. A phandle pointing to the DMA controller. +2. The channel id. + +spi0: spi@70a00000{ + ... + dma-names = "rx_chn", "tx_chn"; + dmas = <&apdma 11>, <&apdma 12>; + ... +}; |