Merge tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:

   - Avoid unnecessary copying in scomp for trivial SG lists

  Algorithms:

   - Optimise NEON CCM implementation on ARM64

  Drivers:

   - Add queue stop/query debugfs support in hisilicon/qm

   - Intel qat updates and cleanups"

* tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits)
  Revert "crypto: remove CONFIG_CRYPTO_STATS"
  crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem
  crypto: tcrypt - add ffdhe2048(dh) test
  crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags
  crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags
  hwrng: hisi - use dev_err_probe
  MAINTAINERS: Remove T Ambarus from few mchp entries
  crypto: iaa - Fix comp/decomp delay statistics
  crypto: iaa - Fix async_disable descriptor leak
  dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
  dt-bindings: crypto: add sam9x7 in Atmel TDES
  dt-bindings: crypto: add sam9x7 in Atmel SHA
  dt-bindings: crypto: add sam9x7 in Atmel AES
  crypto: remove CONFIG_CRYPTO_STATS
  crypto: dh - Make public key test FIPS-only
  crypto: rockchip - fix to check return value
  crypto: jitter - fix CRYPTO_JITTERENTROPY help text
  crypto: qat - make ring to service map common for QAT GEN4
  crypto: qat - fix ring to service map for dcc in 420xx
  crypto: qat - fix ring to service map for dcc in 4xxx
  ...

5 files changed, 112 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/debugfs-driver-qat b/Documentation/ABI/testing/debugfs-driver-qat
index b2db010d851e..bd6793760f29 100644
--- a/Documentation/ABI/testing/debugfs-driver-qat
+++ b/Documentation/ABI/testing/debugfs-driver-qat
@@ -81,3 +81,29 @@ Description:	(RO) Read returns, for each Acceleration Engine (AE), the number
 			<N>: Number of Compress and Verify (CnV) errors and type
 			     of the last CnV error detected by Acceleration
 			     Engine N.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/heartbeat/inject_error
+Date:		March 2024
+KernelVersion:	6.8
+Contact:	qat-linux@intel.com
+Description:	(WO) Write to inject an error that simulates an heartbeat
+		failure. This is to be used for testing purposes.
+
+		After writing this file, the driver stops arbitration on a
+		random engine and disables the fetching of heartbeat counters.
+		If a workload is running on the device, a job submitted to the
+		accelerator might not get a response and a read of the
+		`heartbeat/status` attribute might report -1, i.e. device
+		unresponsive.
+		The error is unrecoverable thus the device must be restarted to
+		restore its functionality.
+
+		This attribute is available only when the kernel is built with
+		CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION=y.
+
+		A write of 1 enables error injection.
+
+		The following example shows how to enable error injection::
+
+			# cd /sys/kernel/debug/qat_<device>_<BDF>
+			# echo 1 > heartbeat/inject_error
diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre
index 8e8de49c5cc6..d4e16ef9ac9a 100644
--- a/Documentation/ABI/testing/debugfs-hisi-hpre
+++ b/Documentation/ABI/testing/debugfs-hisi-hpre
@@ -111,6 +111,28 @@ Description:	QM debug registers(regs) read hardware register value. This
 		node is used to show the change of the qm register values. This
 		node can be help users to check the change of register values.
 
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_state
+Date:		Jan 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the state of the device.
+		0: busy, 1: idle.
+		Only available for PF, and take no other effect on HPRE.
+
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_timeout
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Set the wait time when stop queue fails. Available for both PF
+		and VF, and take no other effect on HPRE.
+		0: not wait(default), others value: wait dev_timeout * 20 microsecond.
+
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_state
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the stop queue status of the QM. The default value is 0,
+		if dev_timeout is set, when stop queue fails, the dev_state
+		will return non-zero value. Available for both PF and VF,
+		and take no other effect on HPRE.
+
 What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs
 Date:		Mar 2022
 Contact:	linux-crypto@vger.kernel.org
diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec
index deeefe2c735e..6c6c9a6e150a 100644
--- a/Documentation/ABI/testing/debugfs-hisi-sec
+++ b/Documentation/ABI/testing/debugfs-hisi-sec
@@ -91,6 +91,28 @@ Description:	QM debug registers(regs) read hardware register value. This
 		node is used to show the change of the qm register values. This
 		node can be help users to check the change of register values.
 
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_state
+Date:		Jan 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the state of the device.
+		0: busy, 1: idle.
+		Only available for PF, and take no other effect on SEC.
+
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_timeout
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Set the wait time when stop queue fails. Available for both PF
+		and VF, and take no other effect on SEC.
+		0: not wait(default), others value: wait dev_timeout * 20 microsecond.
+
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_state
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the stop queue status of the QM. The default value is 0,
+		if dev_timeout is set, when stop queue fails, the dev_state
+		will return non-zero value. Available for both PF and VF,
+		and take no other effect on SEC.
+
 What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs
 Date:		Mar 2022
 Contact:	linux-crypto@vger.kernel.org
diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip
index 593714afaed2..a22dd6942219 100644
--- a/Documentation/ABI/testing/debugfs-hisi-zip
+++ b/Documentation/ABI/testing/debugfs-hisi-zip
@@ -104,6 +104,28 @@ Description:	QM debug registers(regs) read hardware register value. This
 		node is used to show the change of the qm registers value. This
 		node can be help users to check the change of register values.
 
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/qm_state
+Date:		Jan 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the state of the device.
+		0: busy, 1: idle.
+		Only available for PF, and take no other effect on ZIP.
+
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/dev_timeout
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Set the wait time when stop queue fails. Available for both PF
+		and VF, and take no other effect on ZIP.
+		0: not wait(default), others value: wait dev_timeout * 20 microsecond.
+
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/dev_state
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the stop queue status of the QM. The default value is 0,
+		if dev_timeout is set, when stop queue fails, the dev_state
+		will return non-zero value. Available for both PF and VF,
+		and take no other effect on ZIP.
+
 What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs
 Date:		Mar 2022
 Contact:	linux-crypto@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat
index bbf329cf0d67..96020fb051c3 100644
--- a/Documentation/ABI/testing/sysfs-driver-qat
+++ b/Documentation/ABI/testing/sysfs-driver-qat
@@ -141,3 +141,23 @@ Description:
 			64
 
 		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat/auto_reset
+Date:		March 2024
+KernelVersion:	6.8
+Contact:	qat-linux@intel.com
+Description:	(RW) Reports the current state of the autoreset feature
+		for a QAT device
+
+		Write to the attribute to enable or disable device auto reset.
+
+		Device auto reset is disabled by default.
+
+		The values are:
+
+		* 1/Yy/on: auto reset enabled. If the device encounters an
+		  unrecoverable error, it will be reset automatically.
+		* 0/Nn/off: auto reset disabled. If the device encounters an
+		  unrecoverable error, it will not be reset.
+
+		This attribute is only available for qat_4xxx devices.