x86/cpu_entry_area: Move it to a separate unit

Separate the cpu_entry_area code out of cpu/common.c and the fixmap.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

6 files changed, 159 insertions, 135 deletions

diff --git a/arch/x86/include/asm/cpu_entry_area.h b/arch/x86/include/asm/cpu_entry_area.h
new file mode 100644
index 000000000000..5471826803af
--- /dev/null
+++ b/arch/x86/include/asm/cpu_entry_area.h
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#ifndef _ASM_X86_CPU_ENTRY_AREA_H
+#define _ASM_X86_CPU_ENTRY_AREA_H
+
+#include <linux/percpu-defs.h>
+#include <asm/processor.h>
+
+/*
+ * cpu_entry_area is a percpu region that contains things needed by the CPU
+ * and early entry/exit code.  Real types aren't used for all fields here
+ * to avoid circular header dependencies.
+ *
+ * Every field is a virtual alias of some other allocated backing store.
+ * There is no direct allocation of a struct cpu_entry_area.
+ */
+struct cpu_entry_area {
+	char gdt[PAGE_SIZE];
+
+	/*
+	 * The GDT is just below entry_stack and thus serves (on x86_64) as
+	 * a a read-only guard page.
+	 */
+	struct entry_stack_page entry_stack_page;
+
+	/*
+	 * On x86_64, the TSS is mapped RO.  On x86_32, it's mapped RW because
+	 * we need task switches to work, and task switches write to the TSS.
+	 */
+	struct tss_struct tss;
+
+	char entry_trampoline[PAGE_SIZE];
+
+#ifdef CONFIG_X86_64
+	/*
+	 * Exception stacks used for IST entries.
+	 *
+	 * In the future, this should have a separate slot for each stack
+	 * with guard pages between them.
+	 */
+	char exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ];
+#endif
+};
+
+#define CPU_ENTRY_AREA_SIZE	(sizeof(struct cpu_entry_area))
+#define CPU_ENTRY_AREA_PAGES	(CPU_ENTRY_AREA_SIZE / PAGE_SIZE)
+
+DECLARE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
+
+extern void setup_cpu_entry_areas(void);
+
+#endif
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 8153b8d86a3c..fb801662a230 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -25,6 +25,7 @@
 #else
 #include <uapi/asm/vsyscall.h>
 #endif
+#include <asm/cpu_entry_area.h>
 
 /*
  * We can't declare FIXADDR_TOP as variable for x86_64 because vsyscall
@@ -45,46 +46,6 @@ extern unsigned long __FIXADDR_TOP;
 #endif
 
 /*
- * cpu_entry_area is a percpu region in the fixmap that contains things
- * needed by the CPU and early entry/exit code.  Real types aren't used
- * for all fields here to avoid circular header dependencies.
- *
- * Every field is a virtual alias of some other allocated backing store.
- * There is no direct allocation of a struct cpu_entry_area.
- */
-struct cpu_entry_area {
-	char gdt[PAGE_SIZE];
-
-	/*
-	 * The GDT is just below entry_stack and thus serves (on x86_64) as
-	 * a a read-only guard page.
-	 */
-	struct entry_stack_page entry_stack_page;
-
-	/*
-	 * On x86_64, the TSS is mapped RO.  On x86_32, it's mapped RW because
-	 * we need task switches to work, and task switches write to the TSS.
-	 */
-	struct tss_struct tss;
-
-	char entry_trampoline[PAGE_SIZE];
-
-#ifdef CONFIG_X86_64
-	/*
-	 * Exception stacks used for IST entries.
-	 *
-	 * In the future, this should have a separate slot for each stack
-	 * with guard pages between them.
-	 */
-	char exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ];
-#endif
-};
-
-#define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
-
-extern void setup_cpu_entry_areas(void);
-
-/*
  * Here we define all the compile-time 'special' virtual
  * addresses. The point is to have a constant address at
  * compile time, but to set the physical address only
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index ed4acbce37a8..8ddcfa4d4165 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -482,102 +482,8 @@ static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
 	  [0 ... N_EXCEPTION_STACKS - 1]	= EXCEPTION_STKSZ,
 	  [DEBUG_STACK - 1]			= DEBUG_STKSZ
 };
-
-static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
-	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
-#endif
-
-static DEFINE_PER_CPU_PAGE_ALIGNED(struct entry_stack_page,
-				   entry_stack_storage);
-
-static void __init
-set_percpu_fixmap_pages(int idx, void *ptr, int pages, pgprot_t prot)
-{
-	for ( ; pages; pages--, idx--, ptr += PAGE_SIZE)
-		__set_fixmap(idx, per_cpu_ptr_to_phys(ptr), prot);
-}
-
-/* Setup the fixmap mappings only once per-processor */
-static void __init setup_cpu_entry_area(int cpu)
-{
-#ifdef CONFIG_X86_64
-	extern char _entry_trampoline[];
-
-	/* On 64-bit systems, we use a read-only fixmap GDT and TSS. */
-	pgprot_t gdt_prot = PAGE_KERNEL_RO;
-	pgprot_t tss_prot = PAGE_KERNEL_RO;
-#else
-	/*
-	 * On native 32-bit systems, the GDT cannot be read-only because
-	 * our double fault handler uses a task gate, and entering through
-	 * a task gate needs to change an available TSS to busy.  If the
-	 * GDT is read-only, that will triple fault.  The TSS cannot be
-	 * read-only because the CPU writes to it on task switches.
-	 *
-	 * On Xen PV, the GDT must be read-only because the hypervisor
-	 * requires it.
-	 */
-	pgprot_t gdt_prot = boot_cpu_has(X86_FEATURE_XENPV) ?
-		PAGE_KERNEL_RO : PAGE_KERNEL;
-	pgprot_t tss_prot = PAGE_KERNEL;
-#endif
-
-	__set_fixmap(get_cpu_entry_area_index(cpu, gdt), get_cpu_gdt_paddr(cpu), gdt_prot);
-	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, entry_stack_page),
-				per_cpu_ptr(&entry_stack_storage, cpu), 1,
-				PAGE_KERNEL);
-
-	/*
-	 * The Intel SDM says (Volume 3, 7.2.1):
-	 *
-	 *  Avoid placing a page boundary in the part of the TSS that the
-	 *  processor reads during a task switch (the first 104 bytes). The
-	 *  processor may not correctly perform address translations if a
-	 *  boundary occurs in this area. During a task switch, the processor
-	 *  reads and writes into the first 104 bytes of each TSS (using
-	 *  contiguous physical addresses beginning with the physical address
-	 *  of the first byte of the TSS). So, after TSS access begins, if
-	 *  part of the 104 bytes is not physically contiguous, the processor
-	 *  will access incorrect information without generating a page-fault
-	 *  exception.
-	 *
-	 * There are also a lot of errata involving the TSS spanning a page
-	 * boundary.  Assert that we're not doing that.
-	 */
-	BUILD_BUG_ON((offsetof(struct tss_struct, x86_tss) ^
-		      offsetofend(struct tss_struct, x86_tss)) & PAGE_MASK);
-	BUILD_BUG_ON(sizeof(struct tss_struct) % PAGE_SIZE != 0);
-	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, tss),
-				&per_cpu(cpu_tss_rw, cpu),
-				sizeof(struct tss_struct) / PAGE_SIZE,
-				tss_prot);
-
-#ifdef CONFIG_X86_32
-	per_cpu(cpu_entry_area, cpu) = get_cpu_entry_area(cpu);
 #endif
 
-#ifdef CONFIG_X86_64
-	BUILD_BUG_ON(sizeof(exception_stacks) % PAGE_SIZE != 0);
-	BUILD_BUG_ON(sizeof(exception_stacks) !=
-		     sizeof(((struct cpu_entry_area *)0)->exception_stacks));
-	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, exception_stacks),
-				&per_cpu(exception_stacks, cpu),
-				sizeof(exception_stacks) / PAGE_SIZE,
-				PAGE_KERNEL);
-
-	__set_fixmap(get_cpu_entry_area_index(cpu, entry_trampoline),
-		     __pa_symbol(_entry_trampoline), PAGE_KERNEL_RX);
-#endif
-}
-
-void __init setup_cpu_entry_areas(void)
-{
-	unsigned int cpu;
-
-	for_each_possible_cpu(cpu)
-		setup_cpu_entry_area(cpu);
-}
-
 /* Load the original GDT from the per-cpu structure */
 void load_direct_gdt(int cpu)
 {
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 74136fd16f49..464daed6894f 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -52,6 +52,7 @@
 #include <asm/traps.h>
 #include <asm/desc.h>
 #include <asm/fpu/internal.h>
+#include <asm/cpu_entry_area.h>
 #include <asm/mce.h>
 #include <asm/fixmap.h>
 #include <asm/mach_traps.h>
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 7ba7f3d7f477..2e0017af8f9b 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -10,7 +10,7 @@ CFLAGS_REMOVE_mem_encrypt.o	= -pg
 endif
 
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o physaddr.o setup_nx.o tlb.o
+	    pat.o pgtable.o physaddr.o setup_nx.o tlb.o cpu_entry_area.o
 
 # Make sure __phys_addr has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c
new file mode 100644
index 000000000000..235ff9cfaaf4
--- /dev/null
+++ b/arch/x86/mm/cpu_entry_area.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/spinlock.h>
+#include <linux/percpu.h>
+
+#include <asm/cpu_entry_area.h>
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#include <asm/desc.h>
+
+static DEFINE_PER_CPU_PAGE_ALIGNED(struct entry_stack_page, entry_stack_storage);
+
+#ifdef CONFIG_X86_64
+static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
+	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
+#endif
+
+static void __init
+set_percpu_fixmap_pages(int idx, void *ptr, int pages, pgprot_t prot)
+{
+	for ( ; pages; pages--, idx--, ptr += PAGE_SIZE)
+		__set_fixmap(idx, per_cpu_ptr_to_phys(ptr), prot);
+}
+
+/* Setup the fixmap mappings only once per-processor */
+static void __init setup_cpu_entry_area(int cpu)
+{
+#ifdef CONFIG_X86_64
+	extern char _entry_trampoline[];
+
+	/* On 64-bit systems, we use a read-only fixmap GDT and TSS. */
+	pgprot_t gdt_prot = PAGE_KERNEL_RO;
+	pgprot_t tss_prot = PAGE_KERNEL_RO;
+#else
+	/*
+	 * On native 32-bit systems, the GDT cannot be read-only because
+	 * our double fault handler uses a task gate, and entering through
+	 * a task gate needs to change an available TSS to busy.  If the
+	 * GDT is read-only, that will triple fault.  The TSS cannot be
+	 * read-only because the CPU writes to it on task switches.
+	 *
+	 * On Xen PV, the GDT must be read-only because the hypervisor
+	 * requires it.
+	 */
+	pgprot_t gdt_prot = boot_cpu_has(X86_FEATURE_XENPV) ?
+		PAGE_KERNEL_RO : PAGE_KERNEL;
+	pgprot_t tss_prot = PAGE_KERNEL;
+#endif
+
+	__set_fixmap(get_cpu_entry_area_index(cpu, gdt), get_cpu_gdt_paddr(cpu), gdt_prot);
+	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, entry_stack_page),
+				per_cpu_ptr(&entry_stack_storage, cpu), 1,
+				PAGE_KERNEL);
+
+	/*
+	 * The Intel SDM says (Volume 3, 7.2.1):
+	 *
+	 *  Avoid placing a page boundary in the part of the TSS that the
+	 *  processor reads during a task switch (the first 104 bytes). The
+	 *  processor may not correctly perform address translations if a
+	 *  boundary occurs in this area. During a task switch, the processor
+	 *  reads and writes into the first 104 bytes of each TSS (using
+	 *  contiguous physical addresses beginning with the physical address
+	 *  of the first byte of the TSS). So, after TSS access begins, if
+	 *  part of the 104 bytes is not physically contiguous, the processor
+	 *  will access incorrect information without generating a page-fault
+	 *  exception.
+	 *
+	 * There are also a lot of errata involving the TSS spanning a page
+	 * boundary.  Assert that we're not doing that.
+	 */
+	BUILD_BUG_ON((offsetof(struct tss_struct, x86_tss) ^
+		      offsetofend(struct tss_struct, x86_tss)) & PAGE_MASK);
+	BUILD_BUG_ON(sizeof(struct tss_struct) % PAGE_SIZE != 0);
+	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, tss),
+				&per_cpu(cpu_tss_rw, cpu),
+				sizeof(struct tss_struct) / PAGE_SIZE,
+				tss_prot);
+
+#ifdef CONFIG_X86_32
+	per_cpu(cpu_entry_area, cpu) = get_cpu_entry_area(cpu);
+#endif
+
+#ifdef CONFIG_X86_64
+	BUILD_BUG_ON(sizeof(exception_stacks) % PAGE_SIZE != 0);
+	BUILD_BUG_ON(sizeof(exception_stacks) !=
+		     sizeof(((struct cpu_entry_area *)0)->exception_stacks));
+	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, exception_stacks),
+				&per_cpu(exception_stacks, cpu),
+				sizeof(exception_stacks) / PAGE_SIZE,
+				PAGE_KERNEL);
+
+	__set_fixmap(get_cpu_entry_area_index(cpu, entry_trampoline),
+		     __pa_symbol(_entry_trampoline), PAGE_KERNEL_RX);
+#endif
+}
+
+void __init setup_cpu_entry_areas(void)
+{
+	unsigned int cpu;
+
+	for_each_possible_cpu(cpu)
+		setup_cpu_entry_area(cpu);
+}