summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRob Herring <robh@kernel.org>2016-08-22 17:39:09 -0500
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-08-31 15:42:28 +0200
commitb3b57646186400d4f54652ab7bbf55f5764d9467 (patch)
tree08be5a5db4059fe81e02743b7c2810e6dcaa7283
parentebaa81c7287edd40dd4899e5d93a20e7a2b938e7 (diff)
tty: serial_core: convert uart_open to use tty_port_open
tty_port_open handles much of the common parts of tty opening. Convert uart_open to use it and move the serial_core specific parts into tty_port.activate function. This will be needed to use tty_port functions directly from in kernel clients. The tricky part is uart_port_startup can return positive values to allow setserial to configure the port. We now return the positive value to tty_port_open so that the tty is not marked as initialized and then set the return value in uart_open to 0. Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--drivers/tty/serial/serial_core.c70
1 files changed, 23 insertions, 47 deletions
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 9fc15335c8c5..0468725a1dd3 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -235,18 +235,9 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state,
if (tty_port_initialized(port))
return 0;
- /*
- * Set the TTY IO error marker - we will only clear this
- * once we have successfully opened the port.
- */
- set_bit(TTY_IO_ERROR, &tty->flags);
-
retval = uart_port_startup(tty, state, init_hw);
- if (!retval) {
- tty_port_set_initialized(port, 1);
- clear_bit(TTY_IO_ERROR, &tty->flags);
- } else if (retval > 0)
- retval = 0;
+ if (retval)
+ set_bit(TTY_IO_ERROR, &tty->flags);
return retval;
}
@@ -972,8 +963,11 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
}
uart_change_speed(tty, state, NULL);
}
- } else
+ } else {
retval = uart_startup(tty, state, 1);
+ if (retval > 0)
+ retval = 0;
+ }
exit:
return retval;
}
@@ -1139,6 +1133,8 @@ static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state)
uport->ops->config_port(uport, flags);
ret = uart_startup(tty, state, 1);
+ if (ret > 0)
+ ret = 0;
}
out:
mutex_unlock(&port->mutex);
@@ -1711,52 +1707,31 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
struct uart_driver *drv = tty->driver->driver_state;
int retval, line = tty->index;
struct uart_state *state = drv->state + line;
- struct tty_port *port = &state->port;
- struct uart_port *uport;
- pr_debug("uart_open(%d) called\n", line);
+ tty->driver_data = state;
- spin_lock_irq(&port->lock);
- ++port->count;
- spin_unlock_irq(&port->lock);
+ retval = tty_port_open(&state->port, tty, filp);
+ if (retval > 0)
+ retval = 0;
- /*
- * We take the semaphore here to guarantee that we won't be re-entered
- * while allocating the state structure, or while we request any IRQs
- * that the driver may need. This also has the nice side-effect that
- * it delays the action of uart_hangup, so we can guarantee that
- * state->port.tty will always contain something reasonable.
- */
- if (mutex_lock_interruptible(&port->mutex)) {
- retval = -ERESTARTSYS;
- goto end;
- }
+ return retval;
+}
+
+static int uart_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+ struct uart_state *state = container_of(port, struct uart_state, port);
+ struct uart_port *uport;
uport = uart_port_check(state);
- if (!uport || uport->flags & UPF_DEAD) {
- retval = -ENXIO;
- goto err_unlock;
- }
+ if (!uport || uport->flags & UPF_DEAD)
+ return -ENXIO;
- tty->driver_data = state;
- uport->state = state;
port->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
- tty_port_tty_set(port, tty);
/*
* Start up the serial port.
*/
- retval = uart_startup(tty, state, 0);
-
- /*
- * If we succeeded, wait until the port is ready.
- */
-err_unlock:
- mutex_unlock(&port->mutex);
- if (retval == 0)
- retval = tty_port_block_til_ready(port, tty, filp);
-end:
- return retval;
+ return uart_startup(tty, state, 0);
}
static const char *uart_type(struct uart_port *port)
@@ -2470,6 +2445,7 @@ static const struct tty_operations uart_ops = {
static const struct tty_port_operations uart_port_ops = {
.carrier_raised = uart_carrier_raised,
.dtr_rts = uart_dtr_rts,
+ .activate = uart_port_activate,
};
/**