diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-04-26 15:07:23 -0700 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-04-26 15:07:23 -0700 |
| commit | 5a45e01d414636e144ab28b62089d0eb97f43ec2 (patch) | |
| tree | 814ddaaceba0e759988c795a42728e91819af2c1 | |
| parent | 4145ba76b1f7f3296cc673c299084145e1267029 (diff) | |
| parent | fbced0e9465152d628ece5fd0d11de4e7a1f5ce5 (diff) | |
Merge tag 'iio-for-4.7b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing
Jonathan writes:
2nd set of new device support, features and cleanup for IIO in the 4.7 cycle.
Bit of a bumper set for new drivers but plenty of other stuff here as well!
New device support
* ad5592R ADC/DAC
- new driver supporting ad5592r and ad5593r combined ADC/DAC and gpio chips.
* Aosong am2315 relative humidity
- new driver with triggered buffer support in follow up patch.
* bmi160 imu
- new driver
* bmp280
- bmp180 support - note there is support in the misc/bmp085 driver. Intent
is to remove that driver long term.
* invensense mpu6050
- cleanup leading to explicit support of mpu9150 with a good few cleanups
along the way.
* Hope RF hp03 pressure and temperature sensor.
- new driver
* maxim DS1803 potentiometer
- new driver
* maxim max44000 light and proximity sensor
- new driver built in a series of steps to support pretty much everything.
* ROHM BH1780 light sensor
- new driver. There is an existing driver in misc that this is pretty much
intended to replace. The discussion on whether to support the non standard
interface of that driver is some way is continuing.
* st-gyro
- lsm9ds0-gyro. The accel/magn side of this will take a while longer as
extensions to the st library are needed for cases where two types of sensor
share a single i2c address.
* ti-adc081c
- support the adc101c and adc121c
* Vishay VEML6070 UV sensor
- new driver.
New features
* core
- devm_ APIs for channel_get and channel_get_all. The first user of these
is the generic ADC based thermal driver. As it is going through the
thermal tree these will be picked up as a patch to that next cycle as that
is how the author preferred to do it.
- mounting matrix support. This new core support allows devices to provide
to userspace (typically from the device tree) allowing compensation for how
the sensor is mounted on the device. First examples are on UAVs but it
has a more mundane use on typical phone where the chip may be on the front
or the back of the circuit board and soldered at any angle. Includes
support for this ABI in ak8975 (which has an older interface, now
deprecated) and mpu6050.
* tools
- add a -a option to enable all available channels in generic_buffer sample.
Makes it somewhat easier to use.
* adis library and drivers
- support manual self test flag clearing. This has technically been broken
for a very long time - result is an offset on readings as the applied field
is on all the time.
* ak8975
- triggered buffer support
* bmc150
- spi support (including splitting the driver into core and i2c parts)
* bmp280
- oversampling support.
* dht11
- improved logging - useful to debug timing issues on this quirky device.
* st-sensors
- read each channel invidivually as not all support the optimization of
reading in bulk. This is technically a fix, but will need to be backported
if desired.
- support open drain and shared interrupts.
* ti-adc081c
- triggered buffer support.
Cleanups
* inkern
- white space fix.
* ad7606
- use the iio_device_claim_direct_mode call rather than open coding equiv.
* ad799x
- white space fix.
* ad9523
- unsigned -> unsigned int
* apds9660
- brace location tidying up.
- silence an uninitialized variable warning.
* ak8975
- else and brace on same line fix.
* at91_adc
- white space fixes.
* bmc150
- use regmap stored copy of the device pointer rather than having an
additional copy.
* bmg160
- use regmap stored copy of the device pointer rather than having an
additional copy.
* hid-sensors
- white space fixes.
* mcp3422
- white space fix.
* mma7455
- use regmap to retrieve the device struct rather than carrying another copy
in the private data.
* ms_sensors
- white space fix.
* mxs-lradc
- move current bindings out of staging - some will be shortly deprecated but
the reality is that we have device trees out there using them so they will
need to be supported for some time. They accidentally got left behind
when the driver graduated from staging.
- white space cleanup.
- set INPUT_PROP_DIRECT.
- move ts config into a better function.
- move the STMP reset out of the ADC init.
* vf610_adc
- case label indenting fix.
96 files changed, 6016 insertions, 412 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index f155eff910f9..df44998e7506 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1512,3 +1512,56 @@ Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no offset etc.) pH reading of a substance as a negative base-10 logarithm of hydrodium ions in a litre of water. + +What: /sys/bus/iio/devices/iio:deviceX/mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix +KernelVersion: 4.6 +Contact: linux-iio@vger.kernel.org +Description: + Mounting matrix for IIO sensors. This is a rotation matrix which + informs userspace about sensor chip's placement relative to the + main hardware it is mounted on. + Main hardware placement is defined according to the local + reference frame related to the physical quantity the sensor + measures. + Given that the rotation matrix is defined in a board specific + way (platform data and / or device-tree), the main hardware + reference frame definition is left to the implementor's choice + (see below for a magnetometer example). + Applications should apply this rotation matrix to samples so + that when main hardware reference frame is aligned onto local + reference frame, then sensor chip reference frame is also + perfectly aligned with it. + Matrix is a 3x3 unitary matrix and typically looks like + [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix + [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware + are perfectly aligned with each other. + + For example, a mounting matrix for a magnetometer sensor informs + userspace about sensor chip's ORIENTATION relative to the main + hardware. + More specifically, main hardware orientation is defined with + respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where : + * Y is in the ground plane and positive towards magnetic North ; + * X is in the ground plane, perpendicular to the North axis and + positive towards the East ; + * Z is perpendicular to the ground plane and positive upwards. + + An implementor might consider that for a hand-held device, a + 'natural' orientation would be 'front facing camera at the top'. + The main hardware reference frame could then be described as : + * Y is in the plane of the screen and is positive towards the + top of the screen ; + * X is in the plane of the screen, perpendicular to Y axis, and + positive towards the right hand side of the screen ; + * Z is perpendicular to the screen plane and positive out of the + screen. + Another example for a quadrotor UAV might be : + * Y is in the plane of the propellers and positive towards the + front-view camera; + * X is in the plane of the propellers, perpendicular to Y axis, + and positive towards the starboard side of the UAV ; + * Z is perpendicular to propellers plane and positive upwards. diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt index 555fb117d4fa..555fb117d4fa 100644 --- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt diff --git a/Documentation/devicetree/bindings/iio/dac/ad5592r.txt b/Documentation/devicetree/bindings/iio/dac/ad5592r.txt new file mode 100644 index 000000000000..989f96f31c66 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ad5592r.txt @@ -0,0 +1,155 @@ +Analog Devices AD5592R/AD5593R DAC/ADC device driver + +Required properties for the AD5592R: + - compatible: Must be "adi,ad5592r" + - reg: SPI chip select number for the device + - spi-max-frequency: Max SPI frequency to use (< 30000000) + - spi-cpol: The AD5592R requires inverse clock polarity (CPOL) mode + +Required properties for the AD5593R: + - compatible: Must be "adi,ad5593r" + - reg: I2C address of the device + +Required properties for all supported chips: + - #address-cells: Should be 1. + - #size-cells: Should be 0. + - channel nodes: + Each child node represents one channel and has the following + Required properties: + * reg: Pin on which this channel is connected to. + * adi,mode: Mode or function of this channel. + Macros specifying the valid values + can be found in <dt-bindings/iio/adi,ad5592r.h>. + + The following values are currently supported: + * CH_MODE_UNUSED (the pin is unused) + * CH_MODE_ADC (the pin is ADC input) + * CH_MODE_DAC (the pin is DAC output) + * CH_MODE_DAC_AND_ADC (the pin is DAC output + but can be monitored by an ADC, since + there is no disadvantage this + this should be considered as the + preferred DAC mode) + * CH_MODE_GPIO (the pin is registered + with GPIOLIB) + Optional properties: + * adi,off-state: State of this channel when unused or the + device gets removed. Macros specifying the + valid values can be found in + <dt-bindings/iio/adi,ad5592r.h>. + + * CH_OFFSTATE_PULLDOWN (the pin is pulled down) + * CH_OFFSTATE_OUT_LOW (the pin is output low) + * CH_OFFSTATE_OUT_HIGH (the pin is output high) + * CH_OFFSTATE_OUT_TRISTATE (the pin is + tristated output) + + +Optional properties: + - vref-supply: Phandle to the external reference voltage supply. This should + only be set if there is an external reference voltage connected to the VREF + pin. If the property is not set the internal 2.5V reference is used. + - reset-gpios : GPIO spec for the RESET pin. If specified, it will be + asserted during driver probe. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. The first cell is the GPIO number and the second + cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. + +AD5592R Example: + + #include <dt-bindings/iio/adi,ad5592r.h> + + vref: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "vref-ad559x"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ad5592r@0 { + #size-cells = <0>; + #address-cells = <1>; + #gpio-cells = <2>; + compatible = "adi,ad5592r"; + reg = <0>; + + spi-max-frequency = <1000000>; + spi-cpol; + + vref-supply = <&vref>; /* optional */ + reset-gpios = <&gpio0 86 0>; /* optional */ + gpio-controller; + + channel@0 { + reg = <0>; + adi,mode = <CH_MODE_DAC>; + }; + channel@1 { + reg = <1>; + adi,mode = <CH_MODE_ADC>; + }; + channel@2 { + reg = <2>; + adi,mode = <CH_MODE_DAC_AND_ADC>; + }; + channel@3 { + reg = <3>; + adi,mode = <CH_MODE_DAC_AND_ADC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@4 { + reg = <4>; + adi,mode = <CH_MODE_UNUSED>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@5 { + reg = <5>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@6 { + reg = <6>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@7 { + reg = <7>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + }; + +AD5593R Example: + + #include <dt-bindings/iio/adi,ad5592r.h> + + ad5593r@10 { + #size-cells = <0>; + #address-cells = <1>; + #gpio-cells = <2>; + compatible = "adi,ad5593r"; + reg = <0x10>; + gpio-controller; + + channel@0 { + reg = <0>; + adi,mode = <CH_MODE_DAC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@1 { + reg = <1>; + adi,mode = <CH_MODE_ADC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@2 { + reg = <2>; + adi,mode = <CH_MODE_DAC_AND_ADC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@6 { + reg = <6>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt index e4d8f1c52f4a..a9fc11e43b45 100644 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -8,10 +8,23 @@ Required properties: - interrupt-parent : should be the phandle for the interrupt controller - interrupts : interrupt mapping for GPIO IRQ +Optional properties: + - mount-matrix: an optional 3x3 mounting rotation matrix + + Example: mpu6050@68 { compatible = "invensense,mpu6050"; reg = <0x68>; interrupt-parent = <&gpio1>; interrupts = <18 1>; + mount-matrix = "-0.984807753012208", /* x0 */ + "0", /* y0 */ + "-0.173648177666930", /* z0 */ + "0", /* x1 */ + "-1", /* y1 */ + "0", /* z1 */ + "-0.173648177666930", /* x2 */ + "0", /* y2 */ + "0.984807753012208"; /* z2 */ }; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt index 34a3206eefdf..e1e7dd3259f6 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt @@ -9,6 +9,7 @@ Optional properties: - gpios : should be device tree identifier of the magnetometer DRDY pin - vdd-supply: an optional regulator that needs to be on to provide VDD + - mount-matrix: an optional 3x3 mounting rotation matrix Example: @@ -17,4 +18,13 @@ ak8975@0c { reg = <0x0c>; gpios = <&gpj0 7 0>; vdd-supply = <&ldo_3v3_gnss>; + mount-matrix = "-0.984807753012208", /* x0 */ + "0", /* y0 */ + "-0.173648177666930", /* z0 */ + "0", /* x1 */ + "-1", /* y1 */ + "0", /* z1 */ + "-0.173648177666930", /* x2 */ + "0", /* y2 */ + "0.984807753012208"; /* z2 */ }; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt b/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt new file mode 100644 index 000000000000..df77bf552656 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt @@ -0,0 +1,21 @@ +* Maxim Integrated DS1803 digital potentiometer driver + +The node for this driver must be a child node of a I2C controller, hence +all mandatory properties for your controller must be specified. See directory: + + Documentation/devicetree/bindings/i2c + +for more details. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "maxim,ds1803-010", + "maxim,ds1803-050", + "maxim,ds1803-100" + +Example: +ds1803: ds1803@1 { + reg = <0x28>; + compatible = "maxim,ds1803-010"; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt new file mode 100644 index 000000000000..54e7e70bcea5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/hp03.txt @@ -0,0 +1,17 @@ +HopeRF HP03 digital pressure/temperature sensors + +Required properties: +- compatible: must be "hoperf,hp03" +- xclr-gpio: must be device tree identifier of the XCLR pin. + The XCLR pin is a reset of the ADC in the chip, + it must be pulled HI before the conversion and + readout of the value from the ADC registers and + pulled LO afterward. + +Example: + +hp03@0x77 { + compatible = "hoperf,hp03"; + reg = <0x77>; + xclr-gpio = <&portc 0 0x0>; +}; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 71b7bdff21cd..5844cf72862d 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -16,6 +16,10 @@ Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). This property is not configurable on all sensors. +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. (This binding is taken from pinctrl/pinctrl-bindings.txt) + This is a boolean property. Sensors may also have applicable pin control settings, those use the standard bindings from pinctrl/pinctrl-bindings.txt. @@ -47,6 +51,7 @@ Gyroscopes: - st,l3gd20-gyro - st,l3g4is-gyro - st,lsm330-gyro +- st,lsm9ds0-gyro Magnetometers: - st,lsm303agr-magn diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 73b98dfbcea4..bdc2dfbe6795 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -267,6 +267,10 @@ IIO devm_iio_kfifo_free() devm_iio_trigger_alloc() devm_iio_trigger_free() + devm_iio_channel_get() + devm_iio_channel_release() + devm_iio_channel_get_all() + devm_iio_channel_release_all() IO region devm_release_mem_region() diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index 2a0735d6955d..197e693e7e7b 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -188,7 +188,6 @@ enum bmc150_accel_trigger_id { struct bmc150_accel_data { struct regmap *regmap; - struct device *dev; int irq; struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS]; atomic_t active_intr; @@ -257,6 +256,7 @@ static int bmc150_accel_set_mode(struct bmc150_accel_data *data, enum bmc150_power_modes mode, int dur_us) { + struct device *dev = regmap_get_device(data->regmap); int i; int ret; u8 lpw_bits; @@ -280,11 +280,11 @@ static int bmc150_accel_set_mode(struct bmc150_accel_data *data, lpw_bits = mode << BMC150_ACCEL_PMU_MODE_SHIFT; lpw_bits |= (dur_val << BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT); - dev_dbg(data->dev, "Set Mode bits %x\n", lpw_bits); + dev_dbg(dev, "Set Mode bits %x\n", lpw_bits); ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_LPW, lpw_bits); if (ret < 0) { - dev_err(data->dev, "Error writing reg_pmu_lpw\n"); + dev_err(dev, "Error writing reg_pmu_lpw\n"); return ret; } @@ -317,23 +317,24 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, static int bmc150_accel_update_slope(struct bmc150_accel_data *data) { + struct device *dev = regmap_get_device(data->regmap); int ret; ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_6, data->slope_thres); if (ret < 0) { - dev_err(data->dev, "Error writing reg_int_6\n"); + dev_err(dev, "Error writing reg_int_6\n"); return ret; } ret = regmap_update_bits(data->regmap, BMC150_ACCEL_REG_INT_5, BMC150_ACCEL_SLOPE_DUR_MASK, data->slope_dur); if (ret < 0) { - dev_err(data->dev, "Error updating reg_int_5\n"); + dev_err(dev, "Error updating reg_int_5\n"); return ret; } - dev_dbg(data->dev, "%s: %x %x\n", __func__, data->slope_thres, + dev_dbg(dev, "%s: %x %x\n", __func__, data->slope_thres, data->slope_dur); return ret; @@ -379,20 +380,21 @@ static int bmc150_accel_get_startup_times(struct bmc150_accel_data *data) static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on) { + struct device *dev = regmap_get_device(data->regmap); int ret; if (on) { - ret = pm_runtime_get_sync(data->dev); + ret = pm_runtime_get_sync(dev); } else { - pm_runtime_mark_last_busy(data->dev); - ret = pm_runtime_put_autosuspend(data->dev); + pm_runtime_mark_last_busy(dev); + ret = pm_runtime_put_autosuspend(dev); } if (ret < 0) { - dev_err(data->dev, + dev_err(dev, "Failed: bmc150_accel_set_power_state for %d\n", on); if (on) - pm_runtime_put_noidle(data->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -446,6 +448,7 @@ static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev, static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, bool state) { + struct device *dev = regmap_get_device(data->regmap); struct bmc150_accel_interrupt *intr = &data->interrupts[i]; const struct bmc150_accel_interrupt_info *info = intr->info; int ret; @@ -475,7 +478,7 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, ret = regmap_update_bits(data->regmap, info->map_reg, info->map_bitmask, (state ? info->map_bitmask : 0)); if (ret < 0) { - dev_err(data->dev, "Error updating reg_int_map\n"); + dev_err(dev, "Error updating reg_int_map\n"); goto out_fix_power_state; } @@ -483,7 +486,7 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, ret = regmap_update_bits(data->regmap, info->en_reg, info->en_bitmask, (state ? info->en_bitmask : 0)); if (ret < 0) { - dev_err(data->dev, "Error updating reg_int_en\n"); + dev_err(dev, "Error updating reg_int_en\n"); goto out_fix_power_state; } @@ -501,6 +504,7 @@ out_fix_power_state: static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) { + struct device *dev = regmap_get_device(data->regmap); int ret, i; for (i = 0; i < ARRAY_SIZE(data->chip_info->scale_table); ++i) { @@ -509,8 +513,7 @@ static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) BMC150_ACCEL_REG_PMU_RANGE, data->chip_info->scale_table[i].reg_range); if (ret < 0) { - dev_err(data->dev, - "Error writing pmu_range\n"); + dev_err(dev, "Error writing pmu_range\n"); return ret; } @@ -524,6 +527,7 @@ static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val) { + struct device *dev = regmap_get_device(data->regmap); int ret; unsigned int value; @@ -531,7 +535,7 @@ static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val) ret = regmap_read(data->regmap, BMC150_ACCEL_REG_TEMP, &value); if (ret < 0) { - dev_err(data->dev, "Error reading reg_temp\n"); + dev_err(dev, "Error reading reg_temp\n"); mutex_unlock(&data->mutex); return ret; } @@ -546,6 +550,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, struct iio_chan_spec const *chan, int *val) { + struct device *dev = regmap_get_device(data->regmap); int ret; int axis = chan->scan_index; __le16 raw_val; @@ -560,7 +565,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_AXIS_TO_REG(axis), &raw_val, sizeof(raw_val)); if (ret < 0) { - dev_err(data->dev, "Error reading axis %d\n", axis); + dev_err(dev, "Error reading axis %d\n", axis); bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; @@ -832,6 +837,7 @@ static int bmc150_accel_set_watermark(struct iio_dev *indio_dev, unsigned val) static int bmc150_accel_fifo_transfer(struct bmc150_accel_data *data, char *buffer, int samples) { + struct device *dev = regmap_get_device(data->regmap); int sample_length = 3 * 2; int ret; int total_length = samples * sample_length; @@ -855,7 +861,8 @@ static int bmc150_accel_fifo_transfer(struct bmc150_accel_data *data, } if (ret) - dev_err(data->dev, "Error transferring data from fifo in single steps of %zu\n", + dev_err(dev, + "Error transferring data from fifo in single steps of %zu\n", step); return ret; @@ -865,6 +872,7 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, unsigned samples, bool irq) { struct bmc150_accel_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); int ret, i; u8 count; u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; @@ -874,7 +882,7 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, ret = regmap_read(data->regmap, BMC150_ACCEL_REG_FIFO_STATUS, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_fifo_status\n"); + dev_err(dev, "Error reading reg_fifo_status\n"); return ret; } @@ -1136,6 +1144,7 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig) { struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig); struct bmc150_accel_data *data = t->data; + struct device *dev = regmap_get_device(data->regmap); int ret; /* new data interrupts don't need ack */ @@ -1149,8 +1158,7 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig) BMC150_ACCEL_INT_MODE_LATCH_RESET); mutex_unlock(&data->mutex); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_int_rst_latch\n"); + dev_err(dev, "Error writing reg_int_rst_latch\n"); return ret; } @@ -1201,13 +1209,14 @@ static const struct iio_trigger_ops bmc150_accel_trigger_ops = { static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev) { struct bmc150_accel_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); int dir; int ret; unsigned int val; ret = regmap_read(data->regmap, BMC150_ACCEL_REG_INT_STATUS_2, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_int_status_2\n"); + dev_err(dev, "Error reading reg_int_status_2\n"); return ret; } @@ -1250,6 +1259,7 @@ static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private) { struct iio_dev *indio_dev = private; struct bmc150_accel_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); bool ack = false; int ret; @@ -1273,7 +1283,7 @@ static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private) BMC150_ACCEL_INT_MODE_LATCH_INT | BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret) - dev_err(data->dev, "Error writing reg_int_rst_latch\n"); + dev_err(dev, "Error writing reg_int_rst_latch\n"); ret = IRQ_HANDLED; } else { @@ -1344,13 +1354,14 @@ static void bmc150_accel_unregister_triggers(struct bmc150_accel_data *data, static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, struct bmc150_accel_data *data) { + struct device *dev = regmap_get_device(data->regmap); int i, ret; for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { struct bmc150_accel_trigger *t = &data->triggers[i]; - t->indio_trig = devm_iio_trigger_alloc(data->dev, - bmc150_accel_triggers[i].name, + t->indio_trig = devm_iio_trigger_alloc(dev, + bmc150_accel_triggers[i].name, indio_dev->name, indio_dev->id); if (!t->indio_trig) { @@ -1358,7 +1369,7 @@ static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, break; } - t->indio_trig->dev.parent = data->dev; + t->indio_trig->dev.parent = dev; t->indio_trig->ops = &bmc150_accel_trigger_ops; t->intr = bmc150_accel_triggers[i].intr; t->data = data; @@ -1382,12 +1393,13 @@ static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data) { + struct device *dev = regmap_get_device(data->regmap); u8 reg = BMC150_ACCEL_REG_FIFO_CONFIG1; int ret; ret = regmap_write(data->regmap, reg, data->fifo_mode); if (ret < 0) { - dev_err(data->dev, "Error writing reg_fifo_config1\n"); + dev_err(dev, "Error writing reg_fifo_config1\n"); return ret; } @@ -1397,7 +1409,7 @@ static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data) ret = regmap_write(data->regmap, BMC150_ACCEL_REG_FIFO_CONFIG0, data->watermark); if (ret < 0) - dev_err(data->dev, "Error writing reg_fifo_config0\n"); + dev_err(dev, "Error writing reg_fifo_config0\n"); return ret; } @@ -1481,17 +1493,17 @@ static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = { static int bmc150_accel_chip_init(struct bmc150_accel_data *data) { + struct device *dev = regmap_get_device(data->regmap); int ret, i; unsigned int val; ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val); if (ret < 0) { - dev_err(data->dev, - "Error: Reading chip id\n"); + dev_err(dev, "Error: Reading chip id\n"); return ret; } - dev_dbg(data->dev, "Chip Id %x\n", val); + dev_dbg(dev, "Chip Id %x\n", val); for (i = 0; i < ARRAY_SIZE(bmc150_accel_chip_info_tbl); i++) { if (bmc150_accel_chip_info_tbl[i].chip_id == val) { data->chip_info = &bmc150_accel_chip_info_tbl[i]; @@ -1500,7 +1512,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) } if (!data->chip_info) { - dev_err(data->dev, "Invalid chip %x\n", val); + dev_err(dev, "Invalid chip %x\n", val); return -ENODEV; } @@ -1517,8 +1529,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_RANGE, BMC150_ACCEL_DEF_RANGE_4G); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_pmu_range\n"); + dev_err(dev, "Error writing reg_pmu_range\n"); return ret; } @@ -1536,8 +1547,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) BMC150_ACCEL_INT_MODE_LATCH_INT | BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_int_rst_latch\n"); + dev_err(dev, "Error writing reg_int_rst_latch\n"); return ret; } @@ -1557,7 +1567,6 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, data = iio_priv(indio_dev); dev_set_drvdata(dev, indio_dev); - data->dev = dev; data->irq = irq; data->regmap = regmap; @@ -1581,13 +1590,13 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, bmc150_accel_trigger_handler, &bmc150_accel_buffer_ops); if (ret < 0) { - dev_err(data->dev, "Failed: iio triggered buffer setup\n"); + dev_err(dev, "Failed: iio triggered buffer setup\n"); return ret; } if (data->irq > 0) { ret = devm_request_threaded_irq( - data->dev, data->irq, + dev, data->irq, bmc150_accel_irq_handler, bmc150_accel_irq_thread_handler, IRQF_TRIGGER_RISING, @@ -1605,7 +1614,7 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, "Error writing reg_int_rst_latch\n"); + dev_err(dev, "Error writing reg_int_rst_latch\n"); goto err_buffer_cleanup; } @@ -1654,9 +1663,9 @@ int bmc150_accel_core_remove(struct device *dev) iio_device_unregister(indio_dev); - pm_runtime_disable(data->dev); - pm_runtime_set_suspended(data->dev); - pm_runtime_put_noidle(data->dev); + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1); @@ -1705,7 +1714,7 @@ static int bmc150_accel_runtime_suspend(struct device *dev) struct bmc150_accel_data *data = iio_priv(indio_dev); int ret; - dev_dbg(data->dev, __func__); + dev_dbg(dev, __func__); ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0); if (ret < 0) return -EAGAIN; @@ -1720,7 +1729,7 @@ static int bmc150_accel_runtime_resume(struct device *dev) int ret; int sleep_val; - dev_dbg(data->dev, __func__); + dev_dbg(dev, __func__); ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); if (ret < 0) diff --git a/drivers/iio/accel/mma7455_core.c b/drivers/iio/accel/mma7455_core.c index c633cc2c0789..c902f54c23f5 100644 --- a/drivers/iio/accel/mma7455_core.c +++ b/drivers/iio/accel/mma7455_core.c @@ -55,11 +55,11 @@ struct mma7455_data { struct regmap *regmap; - struct device *dev; }; static int mma7455_drdy(struct mma7455_data *mma7455) { + struct device *dev = regmap_get_device(mma7455->regmap); unsigned int reg; int tries = 3; int ret; @@ -75,7 +75,7 @@ static int mma7455_drdy(struct mma7455_data *mma7455) msleep(20); } - dev_warn(mma7455->dev, "data not ready\n"); + dev_warn(dev, "data not ready\n"); return -EIO; } @@ -260,7 +260,6 @@ int mma7455_core_probe(struct device *dev, struct regmap *regmap, dev_set_drvdata(dev, indio_dev); mma7455 = iio_priv(indio_dev); mma7455->regmap = regmap; - mma7455->dev = dev; indio_dev->info = &mma7455_info; indio_dev->name = name; diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index fee32e3d7a05..dc73f2d85e6d 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -99,6 +99,8 @@ #define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10 #define ST_ACCEL_2_IHL_IRQ_ADDR 0x22 #define ST_ACCEL_2_IHL_IRQ_MASK 0x80 +#define ST_ACCEL_2_OD_IRQ_ADDR 0x22 +#define ST_ACCEL_2_OD_IRQ_MASK 0x40 #define ST_ACCEL_2_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 3 */ @@ -180,6 +182,8 @@ #define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20 #define ST_ACCEL_5_IHL_IRQ_ADDR 0x22 #define ST_ACCEL_5_IHL_IRQ_MASK 0x80 +#define ST_ACCEL_5_OD_IRQ_ADDR 0x22 +#define ST_ACCEL_5_OD_IRQ_MASK 0x40 #define ST_ACCEL_5_IG1_EN_ADDR 0x21 #define ST_ACCEL_5_IG1_EN_MASK 0x08 #define ST_ACCEL_5_MULTIREAD_BIT false @@ -332,6 +336,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR, .mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT, .bootime = 2, @@ -397,6 +402,9 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR, .mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK, + .addr_od = ST_ACCEL_2_OD_IRQ_ADDR, + .mask_od = ST_ACCEL_2_OD_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT, .bootime = 2, @@ -474,6 +482,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR, .mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, .ig1 = { .en_addr = ST_ACCEL_3_IG1_EN_ADDR, .en_mask = ST_ACCEL_3_IG1_EN_MASK, @@ -532,6 +541,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .drdy_irq = { .addr = ST_ACCEL_4_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT, .bootime = 2, /* guess */ @@ -583,6 +593,9 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR, .mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK, + .addr_od = ST_ACCEL_5_OD_IRQ_ADDR, + .mask_od = ST_ACCEL_5_OD_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT, .bootime = 2, /* guess */ diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 5937030f0444..25378c5882e2 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -385,11 +385,11 @@ config ROCKCHIP_SARADC module will be called rockchip_saradc. config TI_ADC081C - tristate "Texas Instruments ADC081C021/027" + tristate "Texas Instruments ADC081C/ADC101C/ADC121C family" depends on I2C help - If you say yes here you get support for Texas Instruments ADC081C021 - and ADC081C027 ADC chips. + If you say yes here you get support for Texas Instruments ADC081C, + ADC101C and ADC121C ADC chips. This driver can also be built as a module. If so, the module will be called ti-adc081c. diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c index 01d71588d752..a3f5254f4e51 100644 --- a/drivers/iio/adc/ad799x.c +++ b/drivers/iio/adc/ad799x.c @@ -477,7 +477,7 @@ static int ad799x_read_event_value(struct iio_dev *indio_dev, if (ret < 0) return ret; *val = (ret >> chan->scan_type.shift) & - GENMASK(chan->scan_type.realbits - 1 , 0); + GENMASK(chan->scan_type.realbits - 1, 0); return IIO_VAL_INT; } diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index f284cd6a93d6..52430ba171f3 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -797,8 +797,8 @@ static u32 calc_startup_ticks_9x5(u32 startup_time, u32 adc_clk_khz) * Startup Time = <lookup_table_value> / ADC Clock */ const int startup_lookup[] = { - 0 , 8 , 16 , 24 , - 64 , 80 , 96 , 112, + 0, 8, 16, 24, + 64, 80, 96, 112, 512, 576, 640, 704, 768, 832, 896, 960 }; @@ -924,14 +924,14 @@ static int at91_adc_probe_dt(struct at91_adc_state *st, ret = -EINVAL; goto error_ret; } - trig->name = name; + trig->name = name; if (of_property_read_u32(trig_node, "trigger-value", &prop)) { dev_err(&idev->dev, "Missing trigger-value property in the DT.\n"); ret = -EINVAL; goto error_ret; } - trig->value = prop; + trig->value = prop; trig->is_external = of_property_read_bool(trig_node, "trigger-external"); i++; } diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index d7b36efd2f3c..d1172dc1e8e2 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -61,9 +61,9 @@ static const int mcp3422_scales[4][4] = { { 1000000, 500000, 250000, 125000 }, - { 250000 , 125000, 62500 , 31250 }, - { 62500 , 31250 , 15625 , 7812 }, - { 15625 , 7812 , 3906 , 1953 } }; + { 250000, 125000, 62500, 31250 }, + { 62500, 31250, 15625, 7812 }, + { 15625, 7812, 3906, 1953 } }; /* Constant msleep times for data acquisitions */ static const int mcp3422_read_times[4] = { diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c index 33051b87aac2..ad26da1edbee 100644 --- a/drivers/iio/adc/mxs-lradc.c +++ b/drivers/iio/adc/mxs-lradc.c @@ -686,6 +686,17 @@ static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) { + /* Configure the touchscreen type */ + if (lradc->soc == IMX28_LRADC) { + mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) + mxs_lradc_reg_set(lradc, + LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + } + mxs_lradc_setup_touch_detection(lradc); lradc->cur_plate = LRADC_TOUCH; @@ -1127,6 +1138,7 @@ static int mxs_lradc_ts_register(struct mxs_lradc *lradc) __set_bit(EV_ABS, input->evbit); __set_bit(EV_KEY, input->evbit); __set_bit(BTN_TOUCH, input->keybit); + __set_bit(INPUT_PROP_DIRECT, input->propbit); input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK, @@ -1475,18 +1487,13 @@ static const struct iio_chan_spec mx28_lradc_chan_spec[] = { MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), }; -static int mxs_lradc_hw_init(struct mxs_lradc *lradc) +static void mxs_lradc_hw_init(struct mxs_lradc *lradc) { /* The ADC always uses DELAY CHANNEL 0. */ const u32 adc_cfg = (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); - int ret = stmp_reset_block(lradc->base); - - if (ret) - return ret; - /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0)); @@ -1495,20 +1502,8 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc) mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); - /* Configure the touchscreen type */ - if (lradc->soc == IMX28_LRADC) { - mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) - mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - } - /* Start internal temperature sensing. */ mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2); - - return 0; } static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) @@ -1708,11 +1703,13 @@ static int mxs_lradc_probe(struct platform_device *pdev) } } - /* Configure the hardware. */ - ret = mxs_lradc_hw_init(lradc); + ret = stmp_reset_block(lradc->base); if (ret) goto err_dev; + /* Configure the hardware. */ + mxs_lradc_hw_init(lradc); + /* Register the touchscreen input device. */ if (touch_ret == 0) { ret = mxs_lradc_ts_register(lradc); diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index ecbc12138d58..9fd032d9f402 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -1,9 +1,21 @@ /* + * TI ADC081C/ADC101C/ADC121C 8/10/12-bit ADC driver + * * Copyright (C) 2012 Avionic Design GmbH + * Copyright (C) 2016 Intel * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * Datasheets: + * http://www.ti.com/lit/ds/symlink/adc081c021.pdf + * http://www.ti.com/lit/ds/symlink/adc101c021.pdf + * http://www.ti.com/lit/ds/symlink/adc121c021.pdf + * + * The devices have a very similar interface and differ mostly in the number of + * bits handled. For the 8-bit and 10-bit models the least-significant 4 or 2 + * bits of value registers are reserved. */ #include <linux/err.h> @@ -12,11 +24,17 @@ #include <linux/of.h> #include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> #include <linux/regulator/consumer.h> struct adc081c { struct i2c_client *i2c; struct regulator *ref; + + /* 8, 10 or 12 */ + int bits; }; #define REG_CONV_RES 0x00 @@ -34,7 +52,7 @@ static int adc081c_read_raw(struct iio_dev *iio, if (err < 0) return err; - *value = (err >> 4) & 0xff; + *value = (err & 0xFFF) >> (12 - adc->bits); return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -43,7 +61,7 @@ static int adc081c_read_raw(struct iio_dev *iio, return err; *value = err / 1000; - *shift = 8; + *shift = adc->bits; return IIO_VAL_FRACTIONAL_LOG2; @@ -54,10 +72,53 @@ static int adc081c_read_raw(struct iio_dev *iio, return -EINVAL; } -static const struct iio_chan_spec adc081c_channel = { - .type = IIO_VOLTAGE, - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), +#define ADCxx1C_CHAN(_bits) { \ + .type = IIO_VOLTAGE, \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (_bits), \ + .storagebits = 16, \ + .shift = 12 - (_bits), \ + .endianness = IIO_CPU, \ + }, \ +} + +#define DEFINE_ADCxx1C_CHANNELS(_name, _bits) \ + static const struct iio_chan_spec _name ## _channels[] = { \ + ADCxx1C_CHAN((_bits)), \ + IIO_CHAN_SOFT_TIMESTAMP(1), \ + }; \ + +#define ADC081C_NUM_CHANNELS 2 + +struct adcxx1c_model { + const struct iio_chan_spec* channels; + int bits; +}; + +#define ADCxx1C_MODEL(_name, _bits) \ + { \ + .channels = _name ## _channels, \ + .bits = (_bits), \ + } + +DEFINE_ADCxx1C_CHANNELS(adc081c, 8); +DEFINE_ADCxx1C_CHANNELS(adc101c, 10); +DEFINE_ADCxx1C_CHANNELS(adc121c, 12); + +/* Model ids are indexes in _models array */ +enum adcxx1c_model_id { + ADC081C = 0, + ADC101C = 1, + ADC121C = 2, +}; + +static struct adcxx1c_model adcxx1c_models[] = { + ADCxx1C_MODEL(adc081c, 8), + ADCxx1C_MODEL(adc101c, 10), + ADCxx1C_MODEL(adc121c, 12), }; static const struct iio_info adc081c_info = { @@ -65,11 +126,30 @@ static const struct iio_info adc081c_info = { .driver_module = THIS_MODULE, }; +static irqreturn_t adc081c_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct adc081c *data = iio_priv(indio_dev); + u16 buf[8]; /* 2 bytes data + 6 bytes padding + 8 bytes timestamp */ + int ret; + + ret = i2c_smbus_read_word_swapped(data->i2c, REG_CONV_RES); + if (ret < 0) + goto out; + buf[0] = ret; + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); +out: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + static int adc081c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct iio_dev *iio; struct adc081c *adc; + struct adcxx1c_model *model = &adcxx1c_models[id->driver_data]; int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) @@ -81,6 +161,7 @@ static int adc081c_probe(struct i2c_client *client, adc = iio_priv(iio); adc->i2c = client; + adc->bits = model->bits; adc->ref = devm_regulator_get(&client->dev, "vref"); if (IS_ERR(adc->ref)) @@ -95,18 +176,26 @@ static int adc081c_probe(struct i2c_client *client, iio->modes = INDIO_DIRECT_MODE; iio->info = &adc081c_info; - iio->channels = &adc081c_channel; - iio->num_channels = 1; + iio->channels = model->channels; + iio->num_channels = ADC081C_NUM_CHANNELS; + + err = iio_triggered_buffer_setup(iio, NULL, adc081c_trigger_handler, NULL); + if (err < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + goto err_regulator_disable; + } err = iio_device_register(iio); if (err < 0) - goto regulator_disable; + goto err_buffer_cleanup; i2c_set_clientdata(client, iio); return 0; -regulator_disable: +err_buffer_cleanup: + iio_triggered_buffer_cleanup(iio); +err_regulator_disable: regulator_disable(adc->ref); return err; @@ -118,13 +207,16 @@ static int adc081c_remove(struct i2c_client *client) struct adc081c *adc = iio_priv(iio); iio_device_unregister(iio); + iio_triggered_buffer_cleanup(iio); regulator_disable(adc->ref); return 0; } static const struct i2c_device_id adc081c_id[] = { - { "adc081c", 0 }, + { "adc081c", ADC081C }, + { "adc101c", ADC101C }, + { "adc121c", ADC121C }, { } }; MODULE_DEVICE_TABLE(i2c, adc081c_id); @@ -132,6 +224,8 @@ MODULE_DEVICE_TABLE(i2c, adc081c_id); #ifdef CONFIG_OF static const struct of_device_id adc081c_of_match[] = { { .compatible = "ti,adc081c" }, + { .compatible = "ti,adc101c" }, + { .compatible = "ti,adc121c" }, { } }; MODULE_DEVICE_TABLE(of, adc081c_of_match); @@ -149,5 +243,5 @@ static struct i2c_driver adc081c_driver = { module_i2c_driver(adc081c_driver); MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); -MODULE_DESCRIPTION("Texas Instruments ADC081C021/027 driver"); +MODULE_DESCRIPTION("Texas Instruments ADC081C/ADC101C/ADC121C driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index b10f629cc44b..653bf1379d2e 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -714,19 +714,19 @@ static int vf610_write_raw(struct iio_dev *indio_dev, int i; switch (mask) { - case IIO_CHAN_INFO_SAMP_FREQ: - for (i = 0; - i < ARRAY_SIZE(info->sample_freq_avail); - i++) - if (val == info->sample_freq_avail[i]) { - info->adc_feature.sample_rate = i; - vf610_adc_sample_set(info); - return 0; - } - break; + case IIO_CHAN_INFO_SAMP_FREQ: + for (i = 0; + i < ARRAY_SIZE(info->sample_freq_avail); + i++) + if (val == info->sample_freq_avail[i]) { + info->adc_feature.sample_rate = i; + vf610_adc_sample_set(info); + return 0; + } + break; - default: - break; + default: + break; } return -EINVAL; diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c index 595511022795..5b41f9d0d4f3 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c @@ -115,7 +115,7 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state) return ret; } - return 0; + return 0; #else atomic_set(&st->user_requested_state, state); return _hid_sensor_power_state(st, state); diff --git a/drivers/iio/common/ms_sensors/ms_sensors_i2c.c b/drivers/iio/common/ms_sensors/ms_sensors_i2c.c index 669dc7c270f5..ecf7721ecaf4 100644 --- a/drivers/iio/common/ms_sensors/ms_sensors_i2c.c +++ b/drivers/iio/common/ms_sensors/ms_sensors_i2c.c @@ -106,7 +106,7 @@ int ms_sensors_convert_and_read(void *cli, u8 conv, u8 rd, unsigned int delay, u32 *adc) { int ret; - __be32 buf = 0; + __be32 buf = 0; struct i2c_client *client = (struct i2c_client *)cli; /* Trigger conversion */ diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c index 73764961feac..c55898543a47 100644 --- a/drivers/iio/common/st_sensors/st_sensors_buffer.c +++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c @@ -24,67 +24,30 @@ int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf) { - u8 addr[3]; /* no ST sensor has more than 3 channels */ - int i, n = 0, len; + int i, len; + int total = 0; struct st_sensor_data *sdata = iio_priv(indio_dev); unsigned int num_data_channels = sdata->num_data_channels; - unsigned int byte_for_channel = - indio_dev->channels[0].scan_type.storagebits >> 3; for (i = 0; i < num_data_channels; i++) { + unsigned int bytes_to_read; + if (test_bit(i, indio_dev->active_scan_mask)) { - addr[n] = indio_dev->channels[i].address; - n++; - } - } - switch (n) { - case 1: - len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev, - addr[0], byte_for_channel, buf, sdata->multiread_bit); - break; - case 2: - if ((addr[1] - addr[0]) == byte_for_channel) { + bytes_to_read = indio_dev->channels[i].scan_type.storagebits >> 3; len = sdata->tf->read_multiple_byte(&sdata->tb, - sdata->dev, addr[0], byte_for_channel * n, - buf, sdata->multiread_bit); - } else { - u8 *rx_array; - rx_array = kmalloc(byte_for_channel * num_data_channels, - GFP_KERNEL); - if (!rx_array) - return -ENOMEM; + sdata->dev, indio_dev->channels[i].address, + bytes_to_read, + buf + total, sdata->multiread_bit); - len = sdata->tf->read_multiple_byte(&sdata->tb, - sdata->dev, addr[0], - byte_for_channel * num_data_channels, - rx_array, sdata->multiread_bit); - if (len < 0) { - kfree(rx_array); - return len; - } - - for (i = 0; i < n * byte_for_channel; i++) { - if (i < n) - buf[i] = rx_array[i]; - else - buf[i] = rx_array[n + i]; - } - kfree(rx_array); - len = byte_for_channel * n; + if (len < bytes_to_read) + return -EIO; + + /* Advance the buffer pointer */ + total += len; } - break; - case 3: - len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev, - addr[0], byte_for_channel * num_data_channels, - buf, sdata->multiread_bit); - break; - default: - return -EINVAL; } - if (len != byte_for_channel * n) - return -EIO; - return len; + return total; } EXPORT_SYMBOL(st_sensors_get_buffer_element); @@ -95,6 +58,24 @@ irqreturn_t st_sensors_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct st_sensor_data *sdata = iio_priv(indio_dev); + /* If we have a status register, check if this IRQ came from us */ + if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) { + u8 status; + + len = sdata->tf->read_byte(&sdata->tb, sdata->dev, + sdata->sensor_settings->drdy_irq.addr_stat_drdy, + &status); + if (len < 0) + dev_err(sdata->dev, "could not read channel status\n"); + + /* + * If this was not caused by any channels on this sensor, + * return IRQ_NONE + */ + if (!(status & (u8)indio_dev->active_scan_mask[0])) + return IRQ_NONE; + } + len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data); if (len < 0) goto st_sensors_get_buffer_element_error; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index f5a2d445d0c0..dffe00692169 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -301,6 +301,14 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev, return -EINVAL; } + if (pdata->open_drain) { + if (!sdata->sensor_settings->drdy_irq.addr_od) + dev_err(&indio_dev->dev, + "open drain requested but unsupported.\n"); + else + sdata->int_pin_open_drain = true; + } + return 0; } @@ -321,6 +329,8 @@ static struct st_sensors_platform_data *st_sensors_of_probe(struct device *dev, else pdata->drdy_int_pin = defdata ? defdata->drdy_int_pin : 0; + pdata->open_drain = of_property_read_bool(np, "drive-open-drain"); + return pdata; } #else @@ -374,6 +384,16 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, return err; } + if (sdata->int_pin_open_drain) { + dev_info(&indio_dev->dev, + "set interrupt line to open drain mode\n"); + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor_settings->drdy_irq.addr_od, + sdata->sensor_settings->drdy_irq.mask_od, 1); + if (err < 0) + return err; + } + err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS); return err; diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 6a8c98327945..da72279fcf99 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -64,6 +64,19 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, "rising edge\n", irq_trig); irq_trig = IRQF_TRIGGER_RISING; } + + /* + * If the interrupt pin is Open Drain, by definition this + * means that the interrupt line may be shared with other + * peripherals. But to do this we also need to have a status + * register and mask to figure out if this sensor was firing + * the IRQ or not, so we can tell the interrupt handle that + * it was "our" interrupt. + */ + if (sdata->int_pin_open_drain && + sdata->sensor_settings->drdy_irq.addr_stat_drdy) + irq_trig |= IRQF_SHARED; + err = request_threaded_irq(irq, iio_trigger_generic_data_rdy_poll, NULL, diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 210db81ca144..61d5008bff5c 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -74,6 +74,33 @@ config AD5449 To compile this driver as a module, choose M here: the module will be called ad5449. +config AD5592R_BASE + tristate + +config AD5592R + tristate "Analog Devices AD5592R ADC/DAC driver" + depends on SPI_MASTER + select GPIOLIB + select AD5592R_BASE + help + Say yes here to build support for Analog Devices AD5592R + Digital to Analog / Analog to Digital Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5592r. + +config AD5593R + tristate "Analog Devices AD5593R ADC/DAC driver" + depends on I2C + select GPIOLIB + select AD5592R_BASE + help + Say yes here to build support for Analog Devices AD5593R + Digital to Analog / Analog to Digital Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5593r. + config AD5504 tristate "Analog Devices AD5504/AD5501 DAC SPI driver" depends on SPI diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 420a15cdaa53..8b78d5ca9b11 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -11,6 +11,9 @@ obj-$(CONFIG_AD5064) += ad5064.o obj-$(CONFIG_AD5504) += ad5504.o obj-$(CONFIG_AD5446) += ad5446.o obj-$(CONFIG_AD5449) += ad5449.o +obj-$(CONFIG_AD5592R_BASE) += ad5592r-base.o +obj-$(CONFIG_AD5592R) += ad5592r.o +obj-$(CONFIG_AD5593R) += ad5593r.o obj-$(CONFIG_AD5755) += ad5755.o obj-$(CONFIG_AD5761) += ad5761.o obj-$(CONFIG_AD5764) += ad5764.o diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c new file mode 100644 index 000000000000..948f600e7059 --- /dev/null +++ b/drivers/iio/dac/ad5592r-base.c @@ -0,0 +1,691 @@ +/* + * AD5592R Digital <-> Analog converters driver + * + * Copyright 2014-2016 Analog Devices Inc. + * Author: Paul Cercueil <paul.cercueil@analog.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> +#include <linux/gpio.h> +#include <linux/property.h> + +#include <dt-bindings/iio/adi,ad5592r.h> + +#include "ad5592r-base.h" + +static int ad5592r_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + int ret = 0; + u8 val; + + mutex_lock(&st->gpio_lock); + + if (st->gpio_out & BIT(offset)) + val = st->gpio_val; + else + ret = st->ops->gpio_read(st, &val); + + mutex_unlock(&st->gpio_lock); + + if (ret < 0) + return ret; + + return !!(val & BIT(offset)); +} + +static void ad5592r_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + + mutex_lock(&st->gpio_lock); + + if (value) + st->gpio_val |= BIT(offset); + else + st->gpio_val &= ~BIT(offset); + + st->ops->reg_write(st, AD5592R_REG_GPIO_SET, st->gpio_val); + + mutex_unlock(&st->gpio_lock); +} + +static int ad5592r_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + int ret; + + mutex_lock(&st->gpio_lock); + + st->gpio_out &= ~BIT(offset); + st->gpio_in |= BIT(offset); + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_OUT_EN, st->gpio_out); + if (ret < 0) + goto err_unlock; + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_IN_EN, st->gpio_in); + +err_unlock: + mutex_unlock(&st->gpio_lock); + + return ret; +} + +static int ad5592r_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + int ret; + + mutex_lock(&st->gpio_lock); + + if (value) + st->gpio_val |= BIT(offset); + else + st->gpio_val &= ~BIT(offset); + + st->gpio_in &= ~BIT(offset); + st->gpio_out |= BIT(offset); + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_SET, st->gpio_val); + if (ret < 0) + goto err_unlock; + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_OUT_EN, st->gpio_out); + if (ret < 0) + goto err_unlock; + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_IN_EN, st->gpio_in); + +err_unlock: + mutex_unlock(&st->gpio_lock); + + return ret; +} + +static int ad5592r_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + + if (!(st->gpio_map & BIT(offset))) { + dev_err(st->dev, "GPIO %d is reserved by alternate function\n", + offset); + return -ENODEV; + } + + return 0; +} + +static int ad5592r_gpio_init(struct ad5592r_state *st) +{ + if (!st->gpio_map) + return 0; + + st->gpiochip.label = dev_name(st->dev); + st->gpiochip.base = -1; + st->gpiochip.ngpio = 8; + st->gpiochip.parent = st->dev; + st->gpiochip.can_sleep = true; + st->gpiochip.direction_input = ad5592r_gpio_direction_input; + st->gpiochip.direction_output = ad5592r_gpio_direction_output; + st->gpiochip.get = ad5592r_gpio_get; + st->gpiochip.set = ad5592r_gpio_set; + st->gpiochip.request = ad5592r_gpio_request; + st->gpiochip.owner = THIS_MODULE; + + mutex_init(&st->gpio_lock); + + return gpiochip_add_data(&st->gpiochip, st); +} + +static void ad5592r_gpio_cleanup(struct ad5592r_state *st) +{ + if (st->gpio_map) + gpiochip_remove(&st->gpiochip); +} + +static int ad5592r_reset(struct ad5592r_state *st) +{ + struct gpio_desc *gpio; + struct iio_dev *iio_dev = iio_priv_to_dev(st); + + gpio = devm_gpiod_get_optional(st->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); + + if (gpio) { + udelay(1); + gpiod_set_value(gpio, 1); + } else { + mutex_lock(&iio_dev->mlock); + /* Writing this magic value resets the device */ + st->ops->reg_write(st, AD5592R_REG_RESET, 0xdac); + mutex_unlock(&iio_dev->mlock); + } + + udelay(250); + + return 0; +} + +static int ad5592r_get_vref(struct ad5592r_state *st) +{ + int ret; + + if (st->reg) { + ret = regulator_get_voltage(st->reg); + if (ret < 0) + return ret; + + return ret / 1000; + } else { + return 2500; + } +} + +static int ad5592r_set_channel_modes(struct ad5592r_state *st) +{ + const struct ad5592r_rw_ops *ops = st->ops; + int ret; + unsigned i; + struct iio_dev *iio_dev = iio_priv_to_dev(st); + u8 pulldown = 0, tristate = 0, dac = 0, adc = 0; + u16 read_back; + + for (i = 0; i < st->num_channels; i++) { + switch (st->channel_modes[i]) { + case CH_MODE_DAC: + dac |= BIT(i); + break; + + case CH_MODE_ADC: + adc |= BIT(i); + break; + + case CH_MODE_DAC_AND_ADC: + dac |= BIT(i); + adc |= BIT(i); + break; + + case CH_MODE_GPIO: + st->gpio_map |= BIT(i); + st->gpio_in |= BIT(i); /* Default to input */ + break; + + case CH_MODE_UNUSED: + /* fall-through */ + default: + switch (st->channel_offstate[i]) { + case CH_OFFSTATE_OUT_TRISTATE: + tristate |= BIT(i); + break; + + case CH_OFFSTATE_OUT_LOW: + st->gpio_out |= BIT(i); + break; + + case CH_OFFSTATE_OUT_HIGH: + st->gpio_out |= BIT(i); + st->gpio_val |= BIT(i); + break; + + case CH_OFFSTATE_PULLDOWN: + /* fall-through */ + default: + pulldown |= BIT(i); + break; + } + } + } + + mutex_lock(&iio_dev->mlock); + + /* Pull down unused pins to GND */ + ret = ops->reg_write(st, AD5592R_REG_PULLDOWN, pulldown); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_TRISTATE, tristate); + if (ret) + goto err_unlock; + + /* Configure pins that we use */ + ret = ops->reg_write(st, AD5592R_REG_DAC_EN, dac); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_ADC_EN, adc); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_GPIO_SET, st->gpio_val); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_GPIO_OUT_EN, st->gpio_out); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_GPIO_IN_EN, st->gpio_in); + if (ret) + goto err_unlock; + + /* Verify that we can read back at least one register */ + ret = ops->reg_read(st, AD5592R_REG_ADC_EN, &read_back); + if (!ret && (read_back & 0xff) != adc) + ret = -EIO; + +err_unlock: + mutex_unlock(&iio_dev->mlock); + return ret; +} + +static int ad5592r_reset_channel_modes(struct ad5592r_state *st) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(st->channel_modes); i++) + st->channel_modes[i] = CH_MODE_UNUSED; + + return ad5592r_set_channel_modes(st); +} + +static int ad5592r_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + struct ad5592r_state *st = iio_priv(iio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + + if (val >= (1 << chan->scan_type.realbits) || val < 0) + return -EINVAL; + + if (!chan->output) + return -EINVAL; + + mutex_lock(&iio_dev->mlock); + ret = st->ops->write_dac(st, chan->channel, val); + if (!ret) + st->cached_dac[chan->channel] = val; + mutex_unlock(&iio_dev->mlock); + return ret; + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_VOLTAGE) { + bool gain; + + if (val == st->scale_avail[0][0] && + val2 == st->scale_avail[0][1]) + gain = false; + else if (val == st->scale_avail[1][0] && + val2 == st->scale_avail[1][1]) + gain = true; + else + return -EINVAL; + + mutex_lock(&iio_dev->mlock); + + ret = st->ops->reg_read(st, AD5592R_REG_CTRL, + &st->cached_gp_ctrl); + if (ret < 0) { + mutex_unlock(&iio_dev->mlock); + return ret; + } + + if (chan->output) { + if (gain) + st->cached_gp_ctrl |= + AD5592R_REG_CTRL_DAC_RANGE; + else + st->cached_gp_ctrl &= + ~AD5592R_REG_CTRL_DAC_RANGE; + } else { + if (gain) + st->cached_gp_ctrl |= + AD5592R_REG_CTRL_ADC_RANGE; + else + st->cached_gp_ctrl &= + ~AD5592R_REG_CTRL_ADC_RANGE; + } + + ret = st->ops->reg_write(st, AD5592R_REG_CTRL, + st->cached_gp_ctrl); + mutex_unlock(&iio_dev->mlock); + + return ret; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ad5592r_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long m) +{ + struct ad5592r_state *st = iio_priv(iio_dev); + u16 read_val; + int ret; + + switch (m) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&iio_dev->mlock); + + if (!chan->output) { + ret = st->ops->read_adc(st, chan->channel, &read_val); + if (ret) + goto unlock; + + if ((read_val >> 12 & 0x7) != (chan->channel & 0x7)) { + dev_err(st->dev, "Error while reading channel %u\n", + chan->channel); + ret = -EIO; + goto unlock; + } + + read_val &= GENMASK(11, 0); + + } else { + read_val = st->cached_dac[chan->channel]; + } + + dev_dbg(st->dev, "Channel %u read: 0x%04hX\n", + chan->channel, read_val); + + *val = (int) read_val; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = ad5592r_get_vref(st); + + if (chan->type == IIO_TEMP) { + s64 tmp = *val * (3767897513LL / 25LL); + *val = div_s64_rem(tmp, 1000000000LL, val2); + + ret = IIO_VAL_INT_PLUS_MICRO; + } else { + int mult; + + mutex_lock(&iio_dev->mlock); + + if (chan->output) + mult = !!(st->cached_gp_ctrl & + AD5592R_REG_CTRL_DAC_RANGE); + else + mult = !!(st->cached_gp_ctrl & + AD5592R_REG_CTRL_ADC_RANGE); + + *val *= ++mult; + + *val2 = chan->scan_type.realbits; + ret = IIO_VAL_FRACTIONAL_LOG2; + } + break; + case IIO_CHAN_INFO_OFFSET: + ret = ad5592r_get_vref(st); + + mutex_lock(&iio_dev->mlock); + + if (st->cached_gp_ctrl & AD5592R_REG_CTRL_ADC_RANGE) + *val = (-34365 * 25) / ret; + else + *val = (-75365 * 25) / ret; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + } + +unlock: + mutex_unlock(&iio_dev->mlock); + return ret; +} + +static int ad5592r_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + + default: + return IIO_VAL_INT_PLUS_MICRO; + } + + return -EINVAL; +} + +static const struct iio_info ad5592r_info = { + .read_raw = ad5592r_read_raw, + .write_raw = ad5592r_write_raw, + .write_raw_get_fmt = ad5592r_write_raw_get_fmt, + .driver_module = THIS_MODULE, +}; + +static ssize_t ad5592r_show_scale_available(struct iio_dev *iio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct ad5592r_state *st = iio_priv(iio_dev); + + return sprintf(buf, "%d.%09u %d.%09u\n", + st->scale_avail[0][0], st->scale_avail[0][1], + st->scale_avail[1][0], st->scale_avail[1][1]); +} + +static struct iio_chan_spec_ext_info ad5592r_ext_info[] = { + { + .name = "scale_available", + .read = ad5592r_show_scale_available, + .shared = true, + }, + {}, +}; + +static void ad5592r_setup_channel(struct iio_dev *iio_dev, + struct iio_chan_spec *chan, bool output, unsigned id) +{ + chan->type = IIO_VOLTAGE; + chan->indexed = 1; + chan->output = output; + chan->channel = id; + chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); + chan->scan_type.sign = 'u'; + chan->scan_type.realbits = 12; + chan->scan_type.storagebits = 16; + chan->ext_info = ad5592r_ext_info; +} + +static int ad5592r_alloc_channels(struct ad5592r_state *st) +{ + unsigned i, curr_channel = 0, + num_channels = st->num_channels; + struct iio_dev *iio_dev = iio_priv_to_dev(st); + struct iio_chan_spec *channels; + struct fwnode_handle *child; + u32 reg, tmp; + int ret; + + device_for_each_child_node(st->dev, child) { + ret = fwnode_property_read_u32(child, "reg", ®); + if (ret || reg > ARRAY_SIZE(st->channel_modes)) + continue; + + ret = fwnode_property_read_u32(child, "adi,mode", &tmp); + if (!ret) + st->channel_modes[reg] = tmp; + + fwnode_property_read_u32(child, "adi,off-state", &tmp); + if (!ret) + st->channel_offstate[reg] = tmp; + } + + channels = devm_kzalloc(st->dev, + (1 + 2 * num_channels) * sizeof(*channels), GFP_KERNEL); + if (!channels) + return -ENOMEM; + + for (i = 0; i < num_channels; i++) { + switch (st->channel_modes[i]) { + case CH_MODE_DAC: + ad5592r_setup_channel(iio_dev, &channels[curr_channel], + true, i); + curr_channel++; + break; + + case CH_MODE_ADC: + ad5592r_setup_channel(iio_dev, &channels[curr_channel], + false, i); + curr_channel++; + break; + + case CH_MODE_DAC_AND_ADC: + ad5592r_setup_channel(iio_dev, &channels[curr_channel], + true, i); + curr_channel++; + ad5592r_setup_channel(iio_dev, &channels[curr_channel], + false, i); + curr_channel++; + break; + + default: + continue; + } + } + + channels[curr_channel].type = IIO_TEMP; + channels[curr_channel].channel = 8; + channels[curr_channel].info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET); + curr_channel++; + + iio_dev->num_channels = curr_channel; + iio_dev->channels = channels; + + return 0; +} + +static void ad5592r_init_scales(struct ad5592r_state *st, int vref_mV) +{ + s64 tmp = (s64)vref_mV * 1000000000LL >> 12; + + st->scale_avail[0][0] = + div_s64_rem(tmp, 1000000000LL, &st->scale_avail[0][1]); + st->scale_avail[1][0] = + div_s64_rem(tmp * 2, 1000000000LL, &st->scale_avail[1][1]); +} + +int ad5592r_probe(struct device *dev, const char *name, + const struct ad5592r_rw_ops *ops) +{ + struct iio_dev *iio_dev; + struct ad5592r_state *st; + int ret; + + iio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!iio_dev) + return -ENOMEM; + + st = iio_priv(iio_dev); + st->dev = dev; + st->ops = ops; + st->num_channels = 8; + dev_set_drvdata(dev, iio_dev); + + st->reg = devm_regulator_get_optional(dev, "vref"); + if (IS_ERR(st->reg)) { + if ((PTR_ERR(st->reg) != -ENODEV) && dev->of_node) + return PTR_ERR(st->reg); + + st->reg = NULL; + } else { + ret = regulator_enable(st->reg); + if (ret) + return ret; + } + + iio_dev->dev.parent = dev; + iio_dev->name = name; + iio_dev->info = &ad5592r_info; + iio_dev->modes = INDIO_DIRECT_MODE; + + ad5592r_init_scales(st, ad5592r_get_vref(st)); + + ret = ad5592r_reset(st); + if (ret) + goto error_disable_reg; + + ret = ops->reg_write(st, AD5592R_REG_PD, + (st->reg == NULL) ? AD5592R_REG_PD_EN_REF : 0); + if (ret) + goto error_disable_reg; + + ret = ad5592r_alloc_channels(st); + if (ret) + goto error_disable_reg; + + ret = ad5592r_set_channel_modes(st); + if (ret) + goto error_reset_ch_modes; + + ret = iio_device_register(iio_dev); + if (ret) + goto error_reset_ch_modes; + + ret = ad5592r_gpio_init(st); + if (ret) + goto error_dev_unregister; + + return 0; + +error_dev_unregister: + iio_device_unregister(iio_dev); + +error_reset_ch_modes: + ad5592r_reset_channel_modes(st); + +error_disable_reg: + if (st->reg) + regulator_disable(st->reg); + + return ret; +} +EXPORT_SYMBOL_GPL(ad5592r_probe); + +int ad5592r_remove(struct device *dev) +{ + struct iio_dev *iio_dev = dev_get_drvdata(dev); + struct ad5592r_state *st = iio_priv(iio_dev); + + iio_device_unregister(iio_dev); + ad5592r_reset_channel_modes(st); + ad5592r_gpio_cleanup(st); + + if (st->reg) + regulator_disable(st->reg); + + return 0; +} +EXPORT_SYMBOL_GPL(ad5592r_remove); + +MODULE_AUTHOR("Paul Cercueil <paul.cercueil@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5592R multi-channel converters"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/ad5592r-base.h b/drivers/iio/dac/ad5592r-base.h new file mode 100644 index 000000000000..841457e93f85 --- /dev/null +++ b/drivers/iio/dac/ad5592r-base.h @@ -0,0 +1,76 @@ +/* + * AD5592R / AD5593R Digital <-> Analog converters driver + * + * Copyright 2015-2016 Analog Devices Inc. + * Author: Paul Cercueil <paul.cercueil@analog.com> + * + * Licensed under the GPL-2. + */ + +#ifndef __DRIVERS_IIO_DAC_AD5592R_BASE_H__ +#define __DRIVERS_IIO_DAC_AD5592R_BASE_H__ + +#include <linux/types.h> +#include <linux/cache.h> +#include <linux/mutex.h> +#include <linux/gpio/driver.h> + +struct device; +struct ad5592r_state; + +enum ad5592r_registers { + AD5592R_REG_NOOP = 0x0, + AD5592R_REG_DAC_READBACK = 0x1, + AD5592R_REG_ADC_SEQ = 0x2, + AD5592R_REG_CTRL = 0x3, + AD5592R_REG_ADC_EN = 0x4, + AD5592R_REG_DAC_EN = 0x5, + AD5592R_REG_PULLDOWN = 0x6, + AD5592R_REG_LDAC = 0x7, + AD5592R_REG_GPIO_OUT_EN = 0x8, + AD5592R_REG_GPIO_SET = 0x9, + AD5592R_REG_GPIO_IN_EN = 0xA, + AD5592R_REG_PD = 0xB, + AD5592R_REG_OPEN_DRAIN = 0xC, + AD5592R_REG_TRISTATE = 0xD, + AD5592R_REG_RESET = 0xF, +}; + +#define AD5592R_REG_PD_EN_REF BIT(9) +#define AD5592R_REG_CTRL_ADC_RANGE BIT(5) +#define AD5592R_REG_CTRL_DAC_RANGE BIT(4) + +struct ad5592r_rw_ops { + int (*write_dac)(struct ad5592r_state *st, unsigned chan, u16 value); + int (*read_adc)(struct ad5592r_state *st, unsigned chan, u16 *value); + int (*reg_write)(struct ad5592r_state *st, u8 reg, u16 value); + int (*reg_read)(struct ad5592r_state *st, u8 reg, u16 *value); + int (*gpio_read)(struct ad5592r_state *st, u8 *value); +}; + +struct ad5592r_state { + struct device *dev; + struct regulator *reg; + struct gpio_chip gpiochip; + struct mutex gpio_lock; /* Protect cached gpio_out, gpio_val, etc. */ + unsigned int num_channels; + const struct ad5592r_rw_ops *ops; + int scale_avail[2][2]; + u16 cached_dac[8]; + u16 cached_gp_ctrl; + u8 channel_modes[8]; + u8 channel_offstate[8]; + u8 gpio_map; + u8 gpio_out; + u8 gpio_in; + u8 gpio_val; + + __be16 spi_msg ____cacheline_aligned; + __be16 spi_msg_nop; +}; + +int ad5592r_probe(struct device *dev, const char *name, + const struct ad5592r_rw_ops *ops); +int ad5592r_remove(struct device *dev); + +#endif /* __DRIVERS_IIO_DAC_AD5592R_BASE_H__ */ diff --git a/drivers/iio/dac/ad5592r.c b/drivers/iio/dac/ad5592r.c new file mode 100644 index 000000000000..0b235a2c7359 --- /dev/null +++ b/drivers/iio/dac/ad5592r.c @@ -0,0 +1,164 @@ +/* + * AD5592R Digital <-> Analog converters driver + * + * Copyright 2015-2016 Analog Devices Inc. + * Author: Paul Cercueil <paul.cercueil@analog.com> + * + * Licensed under the GPL-2. + */ + +#include "ad5592r-base.h" + +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/spi/spi.h> + +#define AD5592R_GPIO_READBACK_EN BIT(10) +#define AD5592R_LDAC_READBACK_EN BIT(6) + +static int ad5592r_spi_wnop_r16(struct ad5592r_state *st, u16 *buf) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + struct spi_transfer t = { + .tx_buf = &st->spi_msg_nop, + .rx_buf = buf, + .len = 2 + }; + + st->spi_msg_nop = 0; /* NOP */ + + return spi_sync_transfer(spi, &t, 1); +} + +static int ad5592r_write_dac(struct ad5592r_state *st, unsigned chan, u16 value) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + + st->spi_msg = cpu_to_be16(BIT(15) | (chan << 12) | value); + + return spi_write(spi, &st->spi_msg, sizeof(st->spi_msg)); +} + +static int ad5592r_read_adc(struct ad5592r_state *st, unsigned chan, u16 *value) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + int ret; + + st->spi_msg = cpu_to_be16((AD5592R_REG_ADC_SEQ << 11) | BIT(chan)); + + ret = spi_write(spi, &st->spi_msg, sizeof(st->spi_msg)); + if (ret) + return ret; + + /* + * Invalid data: + * See Figure 40. Single-Channel ADC Conversion Sequence + */ + ret = ad5592r_spi_wnop_r16(st, &st->spi_msg); + if (ret) + return ret; + + ret = ad5592r_spi_wnop_r16(st, &st->spi_msg); + if (ret) + return ret; + + *value = be16_to_cpu(st->spi_msg); + + return 0; +} + +static int ad5592r_reg_write(struct ad5592r_state *st, u8 reg, u16 value) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + + st->spi_msg = cpu_to_be16((reg << 11) | value); + + return spi_write(spi, &st->spi_msg, sizeof(st->spi_msg)); +} + +static int ad5592r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + int ret; + + st->spi_msg = cpu_to_be16((AD5592R_REG_LDAC << 11) | + AD5592R_LDAC_READBACK_EN | (reg << 2)); + + ret = spi_write(spi, &st->spi_msg, sizeof(st->spi_msg)); + if (ret) + return ret; + + ret = ad5592r_spi_wnop_r16(st, &st->spi_msg); + if (ret) + return ret; + + *value = be16_to_cpu(st->spi_msg); + + return 0; +} + +static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value) +{ + int ret; + + ret = ad5592r_reg_write(st, AD5592R_REG_GPIO_IN_EN, + AD5592R_GPIO_READBACK_EN | st->gpio_in); + if (ret) + return ret; + + ret = ad5592r_spi_wnop_r16(st, &st->spi_msg); + if (ret) + return ret; + + *value = (u8) be16_to_cpu(st->spi_msg); + + return 0; +} + +static const struct ad5592r_rw_ops ad5592r_rw_ops = { + .write_dac = ad5592r_write_dac, + .read_adc = ad5592r_read_adc, + .reg_write = ad5592r_reg_write, + .reg_read = ad5592r_reg_read, + .gpio_read = ad5593r_gpio_read, +}; + +static int ad5592r_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return ad5592r_probe(&spi->dev, id->name, &ad5592r_rw_ops); +} + +static int ad5592r_spi_remove(struct spi_device *spi) +{ + return ad5592r_remove(&spi->dev); +} + +static const struct spi_device_id ad5592r_spi_ids[] = { + { .name = "ad5592r", }, + {} +}; +MODULE_DEVICE_TABLE(spi, ad5592r_spi_ids); + +static const struct of_device_id ad5592r_of_match[] = { + { .compatible = "adi,ad5592r", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ad5592r_of_match); + +static struct spi_driver ad5592r_spi_driver = { + .driver = { + .name = "ad5592r", + .of_match_table = of_match_ptr(ad5592r_of_match), + }, + .probe = ad5592r_spi_probe, + .remove = ad5592r_spi_remove, + .id_table = ad5592r_spi_ids, +}; +module_spi_driver(ad5592r_spi_driver); + +MODULE_AUTHOR("Paul Cercueil <paul.cercueil@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5592R multi-channel converters"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/ad5593r.c b/drivers/iio/dac/ad5593r.c new file mode 100644 index 000000000000..dca158a88f47 --- /dev/null +++ b/drivers/iio/dac/ad5593r.c @@ -0,0 +1,131 @@ +/* + * AD5593R Digital <-> Analog converters driver + * + * Copyright 2015-2016 Analog Devices Inc. + * Author: Paul Cercueil <paul.cercueil@analog.com> + * + * Licensed under the GPL-2. + */ + +#include "ad5592r-base.h" + +#include <linux/bitops.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> + +#define AD5593R_MODE_CONF (0 << 4) +#define AD5593R_MODE_DAC_WRITE (1 << 4) +#define AD5593R_MODE_ADC_READBACK (4 << 4) +#define AD5593R_MODE_DAC_READBACK (5 << 4) +#define AD5593R_MODE_GPIO_READBACK (6 << 4) +#define AD5593R_MODE_REG_READBACK (7 << 4) + +static int ad5593r_write_dac(struct ad5592r_state *st, unsigned chan, u16 value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + + return i2c_smbus_write_word_swapped(i2c, + AD5593R_MODE_DAC_WRITE | chan, value); +} + +static int ad5593r_read_adc(struct ad5592r_state *st, unsigned chan, u16 *value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + s32 val; + + val = i2c_smbus_write_word_swapped(i2c, + AD5593R_MODE_CONF | AD5592R_REG_ADC_SEQ, BIT(chan)); + if (val < 0) + return (int) val; + + val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_ADC_READBACK); + if (val < 0) + return (int) val; + + *value = (u16) val; + + return 0; +} + +static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + + return i2c_smbus_write_word_swapped(i2c, + AD5593R_MODE_CONF | reg, value); +} + +static int ad5593r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + s32 val; + + val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_REG_READBACK | reg); + if (val < 0) + return (int) val; + + *value = (u16) val; + + return 0; +} + +static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + s32 val; + + val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_GPIO_READBACK); + if (val < 0) + return (int) val; + + *value = (u8) val; + + return 0; +} + +static const struct ad5592r_rw_ops ad5593r_rw_ops = { + .write_dac = ad5593r_write_dac, + .read_adc = ad5593r_read_adc, + .reg_write = ad5593r_reg_write, + .reg_read = ad5593r_reg_read, + .gpio_read = ad5593r_gpio_read, +}; + +static int ad5593r_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + return ad5592r_probe(&i2c->dev, id->name, &ad5593r_rw_ops); +} + +static int ad5593r_i2c_remove(struct i2c_client *i2c) +{ + return ad5592r_remove(&i2c->dev); +} + +static const struct i2c_device_id ad5593r_i2c_ids[] = { + { .name = "ad5593r", }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ad5593r_i2c_ids); + +static const struct of_device_id ad5593r_of_match[] = { + { .compatible = "adi,ad5593r", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ad5593r_of_match); + +static struct i2c_driver ad5593r_driver = { + .driver = { + .name = "ad5593r", + .of_match_table = of_match_ptr(ad5593r_of_match), + }, + .probe = ad5593r_i2c_probe, + .remove = ad5593r_i2c_remove, + .id_table = ad5593r_i2c_ids, +}; +module_i2c_driver(ad5593r_driver); + +MODULE_AUTHOR("Paul Cercueil <paul.cercueil@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5592R multi-channel converters"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c index 44a30f286de1..99eba524f6dd 100644 --- a/drivers/iio/frequency/ad9523.c +++ b/drivers/iio/frequency/ad9523.c @@ -284,7 +284,7 @@ struct ad9523_state { } data[2] ____cacheline_aligned; }; -static int ad9523_read(struct iio_dev *indio_dev, unsigned addr) +static int ad9523_read(struct iio_dev *indio_dev, unsigned int addr) { struct ad9523_state *st = iio_priv(indio_dev); int ret; @@ -318,7 +318,8 @@ static int ad9523_read(struct iio_dev *indio_dev, unsigned addr) return ret; }; -static int ad9523_write(struct iio_dev *indio_dev, unsigned addr, unsigned val) +static int ad9523_write(struct iio_dev *indio_dev, + unsigned int addr, unsigned int val) { struct ad9523_state *st = iio_priv(indio_dev); int ret; @@ -351,11 +352,11 @@ static int ad9523_io_update(struct iio_dev *indio_dev) } static int ad9523_vco_out_map(struct iio_dev *indio_dev, - unsigned ch, unsigned out) + unsigned int ch, unsigned int out) { struct ad9523_state *st = iio_priv(indio_dev); int ret; - unsigned mask; + unsigned int mask; switch (ch) { case 0 ... 3: @@ -405,7 +406,7 @@ static int ad9523_vco_out_map(struct iio_dev *indio_dev, } static int ad9523_set_clock_provider(struct iio_dev *indio_dev, - unsigned ch, unsigned long freq) + unsigned int ch, unsigned long freq) { struct ad9523_state *st = iio_priv(indio_dev); long tmp1, tmp2; @@ -619,7 +620,7 @@ static int ad9523_read_raw(struct iio_dev *indio_dev, long m) { struct ad9523_state *st = iio_priv(indio_dev); - unsigned code; + unsigned int code; int ret; mutex_lock(&indio_dev->mlock); @@ -655,7 +656,7 @@ static int ad9523_write_raw(struct iio_dev *indio_dev, long mask) { struct ad9523_state *st = iio_priv(indio_dev); - unsigned reg; + unsigned int reg; int ret, tmp, code; mutex_lock(&indio_dev->mlock); @@ -709,8 +710,8 @@ out: } static int ad9523_reg_access(struct iio_dev *indio_dev, - unsigned reg, unsigned writeval, - unsigned *readval) + unsigned int reg, unsigned int writeval, + unsigned int *readval) { int ret; diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index e816d29d6a62..205a84420ae9 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -93,7 +93,7 @@ config IIO_ST_GYRO_3AXIS select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) help Say yes here to build support for STMicroelectronics gyroscopes: - L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330. + L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330, LSM9DS0. This driver can also be built as a module. If so, these modules will be created: diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c index dd2f850a2f0b..7ccc044063f6 100644 --- a/drivers/iio/gyro/bmg160_core.c +++ b/drivers/iio/gyro/bmg160_core.c @@ -95,7 +95,6 @@ #define BMG160_AUTO_SUSPEND_DELAY_MS 2000 struct bmg160_data { - struct device *dev; struct regmap *regmap; struct iio_trigger *dready_trig; struct iio_trigger *motion_trig; @@ -137,11 +136,12 @@ static const struct { static int bmg160_set_mode(struct bmg160_data *data, u8 mode) { + struct device *dev = regmap_get_device(data->regmap); int ret; ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode); if (ret < 0) { - dev_err(data->dev, "Error writing reg_pmu_lpw\n"); + dev_err(dev, "Error writing reg_pmu_lpw\n"); return ret; } @@ -162,6 +162,7 @@ static int bmg160_convert_freq_to_bit(int val) static int bmg160_set_bw(struct bmg160_data *data, int val) { + struct device *dev = regmap_get_device(data->regmap); int ret; int bw_bits; @@ -171,7 +172,7 @@ static int bmg160_set_bw(struct bmg160_data *data, int val) ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits); if (ret < 0) { - dev_err(data->dev, "Error writing reg_pmu_bw\n"); + dev_err(dev, "Error writing reg_pmu_bw\n"); return ret; } @@ -182,18 +183,19 @@ static int bmg160_set_bw(struct bmg160_data *data, int val) static int bmg160_chip_init(struct bmg160_data *data) { + struct device *dev = regmap_get_device(data->regmap); int ret; unsigned int val; ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_chip_id\n"); + dev_err(dev, "Error reading reg_chip_id\n"); return ret; } - dev_dbg(data->dev, "Chip Id %x\n", val); + dev_dbg(dev, "Chip Id %x\n", val); if (val != BMG160_CHIP_ID_VAL) { - dev_err(data->dev, "invalid chip %x\n", val); + dev_err(dev, "invalid chip %x\n", val); return -ENODEV; } @@ -212,14 +214,14 @@ static int bmg160_chip_init(struct bmg160_data *data) /* Set Default Range */ ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS); if (ret < 0) { - dev_err(data->dev, "Error writing reg_range\n"); + dev_err(dev, "Error writing reg_range\n"); return ret; } data->dps_range = BMG160_RANGE_500DPS; ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_slope_thres\n"); + dev_err(dev, "Error reading reg_slope_thres\n"); return ret; } data->slope_thres = val; @@ -228,7 +230,7 @@ static int bmg160_chip_init(struct bmg160_data *data) ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1, BMG160_INT1_BIT_OD, 0); if (ret < 0) { - dev_err(data->dev, "Error updating bits in reg_int_en_1\n"); + dev_err(dev, "Error updating bits in reg_int_en_1\n"); return ret; } @@ -236,7 +238,7 @@ static int bmg160_chip_init(struct bmg160_data *data) BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, + dev_err(dev, "Error writing reg_motion_intr\n"); return ret; } @@ -247,20 +249,21 @@ static int bmg160_chip_init(struct bmg160_data *data) static int bmg160_set_power_state(struct bmg160_data *data, bool on) { #ifdef CONFIG_PM + struct device *dev = regmap_get_device(data->regmap); int ret; if (on) - ret = pm_runtime_get_sync(data->dev); + ret = pm_runtime_get_sync(dev); else { - pm_runtime_mark_last_busy(data->dev); - ret = pm_runtime_put_autosuspend(data->dev); + pm_runtime_mark_last_busy(dev); + ret = pm_runtime_put_autosuspend(dev); } if (ret < 0) { - dev_err(data->dev, - "Failed: bmg160_set_power_state for %d\n", on); + dev_err(dev, "Failed: bmg160_set_power_state for %d\n", on); + if (on) - pm_runtime_put_noidle(data->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -272,6 +275,7 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on) static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, bool status) { + struct device *dev = regmap_get_device(data->regmap); int ret; /* Enable/Disable INT_MAP0 mapping */ @@ -279,7 +283,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, BMG160_INT_MAP_0_BIT_ANY, (status ? BMG160_INT_MAP_0_BIT_ANY : 0)); if (ret < 0) { - dev_err(data->dev, "Error updating bits reg_int_map0\n"); + dev_err(dev, "Error updating bits reg_int_map0\n"); return ret; } @@ -289,8 +293,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES, data->slope_thres); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_slope_thres\n"); + dev_err(dev, "Error writing reg_slope_thres\n"); return ret; } @@ -298,8 +301,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y | BMG160_INT_MOTION_Z); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_motion_intr\n"); + dev_err(dev, "Error writing reg_motion_intr\n"); return ret; } @@ -314,8 +316,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_rst_latch\n"); + dev_err(dev, "Error writing reg_rst_latch\n"); return ret; } } @@ -328,7 +329,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, } if (ret < 0) { - dev_err(data->dev, "Error writing reg_int_en0\n"); + dev_err(dev, "Error writing reg_int_en0\n"); return ret; } @@ -338,6 +339,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, bool status) { + struct device *dev = regmap_get_device(data->regmap); int ret; /* Enable/Disable INT_MAP1 mapping */ @@ -345,7 +347,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, BMG160_INT_MAP_1_BIT_NEW_DATA, (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0)); if (ret < 0) { - dev_err(data->dev, "Error updating bits in reg_int_map1\n"); + dev_err(dev, "Error updating bits in reg_int_map1\n"); return ret; } @@ -354,9 +356,8 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, BMG160_INT_MODE_NON_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_rst_latch\n"); - return ret; + dev_err(dev, "Error writing reg_rst_latch\n"); + return ret; } ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, @@ -368,16 +369,15 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_rst_latch\n"); - return ret; + dev_err(dev, "Error writing reg_rst_latch\n"); + return ret; } ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0); } if (ret < 0) { - dev_err(data->dev, "Error writing reg_int_en0\n"); + dev_err(dev, "Error writing reg_int_en0\n"); return ret; } @@ -400,6 +400,7 @@ static int bmg160_get_bw(struct bmg160_data *data, int *val) static int bmg160_set_scale(struct bmg160_data *data, int val) { + struct device *dev = regmap_get_device(data->regmap); int ret, i; for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) { @@ -407,8 +408,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val) ret = regmap_write(data->regmap, BMG160_REG_RANGE, bmg160_scale_table[i].dps_range); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_range\n"); + dev_err(dev, "Error writing reg_range\n"); return ret; } data->dps_range = bmg160_scale_table[i].dps_range; @@ -421,6 +421,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val) static int bmg160_get_temp(struct bmg160_data *data, int *val) { + struct device *dev = regmap_get_device(data->regmap); int ret; unsigned int raw_val; @@ -433,7 +434,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val) ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_temp\n"); + dev_err(dev, "Error reading reg_temp\n"); bmg160_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; @@ -450,6 +451,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val) static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) { + struct device *dev = regmap_get_device(data->regmap); int ret; __le16 raw_val; @@ -463,7 +465,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val, sizeof(raw_val)); if (ret < 0) { - dev_err(data->dev, "Error reading axis %d\n", axis); + dev_err(dev, "Error reading axis %d\n", axis); bmg160_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; @@ -793,6 +795,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig) { struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); struct bmg160_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); int ret; /* new data interrupts don't need ack */ @@ -804,7 +807,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig) BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, "Error writing reg_rst_latch\n"); + dev_err(dev, "Error writing reg_rst_latch\n"); return ret; } @@ -864,13 +867,14 @@ static irqreturn_t bmg160_event_handler(int irq, void *private) { struct iio_dev *indio_dev = private; struct bmg160_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); int ret; int dir; unsigned int val; ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_int_status2\n"); + dev_err(dev, "Error reading reg_int_status2\n"); goto ack_intr_status; } @@ -907,8 +911,7 @@ ack_intr_status: BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) - dev_err(data->dev, - "Error writing reg_rst_latch\n"); + dev_err(dev, "Error writing reg_rst_latch\n"); } return IRQ_HANDLED; @@ -976,7 +979,6 @@ int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq, data = iio_priv(indio_dev); dev_set_drvdata(dev, indio_dev); - data->dev = dev; data->irq = irq; data->regmap = regmap; @@ -1139,7 +1141,7 @@ static int bmg160_runtime_suspend(struct device *dev) ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND); if (ret < 0) { - dev_err(data->dev, "set mode failed\n"); + dev_err(dev, "set mode failed\n"); return -EAGAIN; } diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h index 5353d6328c54..a5c5c4e29add 100644 --- a/drivers/iio/gyro/st_gyro.h +++ b/drivers/iio/gyro/st_gyro.h @@ -21,6 +21,7 @@ #define L3GD20_GYRO_DEV_NAME "l3gd20" #define L3G4IS_GYRO_DEV_NAME "l3g4is_ui" #define LSM330_GYRO_DEV_NAME "lsm330_gyro" +#define LSM9DS0_GYRO_DEV_NAME "lsm9ds0_gyro" /** * struct st_sensors_platform_data - gyro platform data diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 110f95b6e52f..52a3c87c375c 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -190,6 +190,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT, .bootime = 2, @@ -203,6 +204,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { [2] = LSM330DLC_GYRO_DEV_NAME, [3] = L3G4IS_GYRO_DEV_NAME, [4] = LSM330_GYRO_DEV_NAME, + [5] = LSM9DS0_GYRO_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, .odr = { @@ -258,6 +260,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT, .bootime = 2, @@ -322,6 +325,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_GYRO_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c index 6848451f817a..40056b821036 100644 --- a/drivers/iio/gyro/st_gyro_i2c.c +++ b/drivers/iio/gyro/st_gyro_i2c.c @@ -48,6 +48,10 @@ static const struct of_device_id st_gyro_of_match[] = { .compatible = "st,lsm330-gyro", .data = LSM330_GYRO_DEV_NAME, }, + { + .compatible = "st,lsm9ds0-gyro", + .data = LSM9DS0_GYRO_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_gyro_of_match); @@ -93,6 +97,7 @@ static const struct i2c_device_id st_gyro_id_table[] = { { L3GD20_GYRO_DEV_NAME }, { L3G4IS_GYRO_DEV_NAME }, { LSM330_GYRO_DEV_NAME }, + { LSM9DS0_GYRO_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(i2c, st_gyro_id_table); diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c index d2b7a5fa344c..fbf2faed501c 100644 --- a/drivers/iio/gyro/st_gyro_spi.c +++ b/drivers/iio/gyro/st_gyro_spi.c @@ -54,6 +54,7 @@ static const struct spi_device_id st_gyro_id_table[] = { { L3GD20_GYRO_DEV_NAME }, { L3G4IS_GYRO_DEV_NAME }, { LSM330_GYRO_DEV_NAME }, + { LSM9DS0_GYRO_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(spi, st_gyro_id_table); diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 866dda133336..738a86d9e4a9 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -3,6 +3,16 @@ # menu "Humidity sensors" +config AM2315 + tristate "Aosong AM2315 relative humidity and temperature sensor" + depends on I2C + help + If you say yes here you get support for the Aosong AM2315 + relative humidity and ambient temperature sensor. + + This driver can also be built as a module. If so, the module will + be called am2315. + config DHT11 tristate "DHT11 (and compatible sensors) driver" depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile index c9f089a9a6b8..4a73442fcd9c 100644 --- a/drivers/iio/humidity/Makefile +++ b/drivers/iio/humidity/Makefile @@ -2,6 +2,7 @@ # Makefile for IIO humidity sensor drivers # +obj-$(CONFIG_AM2315) += am2315.o obj-$(CONFIG_DHT11) += dht11.o obj-$(CONFIG_HDC100X) += hdc100x.o obj-$(CONFIG_HTU21) += htu21.o diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c new file mode 100644 index 000000000000..3be6d209a159 --- /dev/null +++ b/drivers/iio/humidity/am2315.c @@ -0,0 +1,303 @@ +/** + * Aosong AM2315 relative humidity and temperature + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * 7-bit I2C address: 0x5C. + */ + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define AM2315_REG_HUM_MSB 0x00 +#define AM2315_REG_HUM_LSB 0x01 +#define AM2315_REG_TEMP_MSB 0x02 +#define AM2315_REG_TEMP_LSB 0x03 + +#define AM2315_FUNCTION_READ 0x03 +#define AM2315_HUM_OFFSET 2 +#define AM2315_TEMP_OFFSET 4 +#define AM2315_ALL_CHANNEL_MASK GENMASK(1, 0) + +#define AM2315_DRIVER_NAME "am2315" + +struct am2315_data { + struct i2c_client *client; + struct mutex lock; + s16 buffer[8]; /* 2x16-bit channels + 2x16 padding + 4x16 timestamp */ +}; + +struct am2315_sensor_data { + s16 hum_data; + s16 temp_data; +}; + +static const struct iio_chan_spec am2315_channels[] = { + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +/* CRC calculation algorithm, as specified in the datasheet (page 13). */ +static u16 am2315_crc(u8 *data, u8 nr_bytes) +{ + int i; + u16 crc = 0xffff; + + while (nr_bytes--) { + crc ^= *data++; + for (i = 0; i < 8; i++) { + if (crc & 0x01) { + crc >>= 1; + crc ^= 0xA001; + } else { + crc >>= 1; + } + } + } + + return crc; +} + +/* Simple function that sends a few bytes to the device to wake it up. */ +static void am2315_ping(struct i2c_client *client) +{ + i2c_smbus_read_byte_data(client, AM2315_REG_HUM_MSB); +} + +static int am2315_read_data(struct am2315_data *data, + struct am2315_sensor_data *sensor_data) +{ + int ret; + /* tx_buf format: <function code> <start addr> <nr of regs to read> */ + u8 tx_buf[3] = { AM2315_FUNCTION_READ, AM2315_REG_HUM_MSB, 4 }; + /* + * rx_buf format: + * <function code> <number of registers read> + * <humidity MSB> <humidity LSB> <temp MSB> <temp LSB> + * <CRC LSB> <CRC MSB> + */ + u8 rx_buf[8]; + u16 crc; + + /* First wake up the device. */ + am2315_ping(data->client); + + mutex_lock(&data->lock); + ret = i2c_master_send(data->client, tx_buf, sizeof(tx_buf)); + if (ret < 0) { + dev_err(&data->client->dev, "failed to send read request\n"); + goto exit_unlock; + } + /* Wait 2-3 ms, then read back the data sent by the device. */ + usleep_range(2000, 3000); + /* Do a bulk data read, then pick out what we need. */ + ret = i2c_master_recv(data->client, rx_buf, sizeof(rx_buf)); + if (ret < 0) { + dev_err(&data->client->dev, "failed to read sensor data\n"); + goto exit_unlock; + } + mutex_unlock(&data->lock); + /* + * Do a CRC check on the data and compare it to the value + * calculated by the device. + */ + crc = am2315_crc(rx_buf, sizeof(rx_buf) - 2); + if ((crc & 0xff) != rx_buf[6] || (crc >> 8) != rx_buf[7]) { + dev_err(&data->client->dev, "failed to verify sensor data\n"); + return -EIO; + } + + sensor_data->hum_data = (rx_buf[AM2315_HUM_OFFSET] << 8) | + rx_buf[AM2315_HUM_OFFSET + 1]; + sensor_data->temp_data = (rx_buf[AM2315_TEMP_OFFSET] << 8) | + rx_buf[AM2315_TEMP_OFFSET + 1]; + + return ret; + +exit_unlock: + mutex_unlock(&data->lock); + return ret; +} + +static irqreturn_t am2315_trigger_handler(int irq, void *p) +{ + int i; + int ret; + int bit; + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct am2315_data *data = iio_priv(indio_dev); + struct am2315_sensor_data sensor_data; + + ret = am2315_read_data(data, &sensor_data); + if (ret < 0) { + mutex_unlock(&data->lock); + goto err; + } + + mutex_lock(&data->lock); + if (*(indio_dev->active_scan_mask) == AM2315_ALL_CHANNEL_MASK) { + data->buffer[0] = sensor_data.hum_data; + data->buffer[1] = sensor_data.temp_data; + } else { + i = 0; + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + data->buffer[i] = (bit ? sensor_data.temp_data : + sensor_data.hum_data); + i++; + } + } + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + pf->timestamp); +err: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int am2315_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + struct am2315_sensor_data sensor_data; + struct am2315_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = am2315_read_data(data, &sensor_data); + if (ret < 0) + return ret; + *val = (chan->type == IIO_HUMIDITYRELATIVE) ? + sensor_data.hum_data : sensor_data.temp_data; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 100; + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static const struct iio_info am2315_info = { + .driver_module = THIS_MODULE, + .read_raw = am2315_read_raw, +}; + +static int am2315_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct iio_dev *indio_dev; + struct am2315_data *data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) { + dev_err(&client->dev, "iio allocation failed!\n"); + return -ENOMEM; + } + + data = iio_priv(indio_dev); + data->client = client; + i2c_set_clientdata(client, indio_dev); + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &am2315_info; + indio_dev->name = AM2315_DRIVER_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = am2315_channels; + indio_dev->num_channels = ARRAY_SIZE(am2315_channels); + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + am2315_trigger_handler, NULL); + if (ret < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + return ret; + } + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto err_buffer_cleanup; + + return 0; + +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + return ret; +} + +static int am2315_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + return 0; +} + +static const struct i2c_device_id am2315_i2c_id[] = { + {"am2315", 0}, + {} +}; + +static const struct acpi_device_id am2315_acpi_id[] = { + {"AOS2315", 0}, + {} +}; + +MODULE_DEVICE_TABLE(acpi, am2315_acpi_id); + +static struct i2c_driver am2315_driver = { + .driver = { + .name = "am2315", + .acpi_match_table = ACPI_PTR(am2315_acpi_id), + }, + .probe = am2315_probe, + .remove = am2315_remove, + .id_table = am2315_i2c_id, +}; + +module_i2c_driver(am2315_driver); + +MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>"); +MODULE_DESCRIPTION("Aosong AM2315 relative humidity and temperature"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index 20b500da94db..9c47bc98f3ac 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -96,6 +96,24 @@ struct dht11 { struct {s64 ts; int value; } edges[DHT11_EDGES_PER_READ]; }; +#ifdef CONFIG_DYNAMIC_DEBUG +/* + * dht11_edges_print: show the data as actually received by the + * driver. + */ +static void dht11_edges_print(struct dht11 *dht11) +{ + int i; + + dev_dbg(dht11->dev, "%d edges detected:\n", dht11->num_edges); + for (i = 1; i < dht11->num_edges; ++i) { + dev_dbg(dht11->dev, "%d: %lld ns %s\n", i, + dht11->edges[i].ts - dht11->edges[i - 1].ts, + dht11->edges[i - 1].value ? "high" : "low"); + } +} +#endif /* CONFIG_DYNAMIC_DEBUG */ + static unsigned char dht11_decode_byte(char *bits) { unsigned char ret = 0; @@ -119,8 +137,12 @@ static int dht11_decode(struct dht11 *dht11, int offset) for (i = 0; i < DHT11_BITS_PER_READ; ++i) { t = dht11->edges[offset + 2 * i + 2].ts - dht11->edges[offset + 2 * i + 1].ts; - if (!dht11->edges[offset + 2 * i + 1].value) - return -EIO; /* lost synchronisation */ + if (!dht11->edges[offset + 2 * i + 1].value) { + dev_dbg(dht11->dev, + "lost synchronisation at edge %d\n", + offset + 2 * i + 1); + return -EIO; + } bits[i] = t > DHT11_THRESHOLD; } @@ -130,8 +152,10 @@ static int dht11_decode(struct dht11 *dht11, int offset) temp_dec = dht11_decode_byte(&bits[24]); checksum = dht11_decode_byte(&bits[32]); - if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum) + if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum) { + dev_dbg(dht11->dev, "invalid checksum\n"); return -EIO; + } dht11->timestamp = ktime_get_boot_ns(); if (hum_int < 20) { /* DHT22 */ @@ -182,6 +206,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev, mutex_lock(&dht11->lock); if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_boot_ns()) { timeres = ktime_get_resolution_ns(); + dev_dbg(dht11->dev, "current timeresolution: %dns\n", timeres); if (timeres > DHT11_MIN_TIMERES) { dev_err(dht11->dev, "timeresolution %dns too low\n", timeres); @@ -219,10 +244,13 @@ static int dht11_read_raw(struct iio_dev *iio_dev, free_irq(dht11->irq, iio_dev); +#ifdef CONFIG_DYNAMIC_DEBUG + dht11_edges_print(dht11); +#endif + if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) { - dev_err(&iio_dev->dev, - "Only %d signal edges detected\n", - dht11->num_edges); + dev_err(dht11->dev, "Only %d signal edges detected\n", + dht11->num_edges); ret = -ETIMEDOUT; } if (ret < 0) diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index 5e610f7de5aa..1f1ad41ef881 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -25,6 +25,8 @@ config ADIS16480 Say yes here to build support for Analog Devices ADIS16375, ADIS16480, ADIS16485, ADIS16488 inertial sensors. +source "drivers/iio/imu/bmi160/Kconfig" + config KMX61 tristate "Kionix KMX61 6-axis accelerometer and magnetometer" depends on I2C diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index e1e6e3d70e26..c71bcd30dc38 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -13,6 +13,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_trigger.o adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o +obj-y += bmi160/ obj-y += inv_mpu6050/ obj-$(CONFIG_KMX61) += kmx61.o diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c index 911255d41c1a..ad6f91d06185 100644 --- a/drivers/iio/imu/adis.c +++ b/drivers/iio/imu/adis.c @@ -324,7 +324,12 @@ static int adis_self_test(struct adis *adis) msleep(adis->data->startup_delay); - return adis_check_status(adis); + ret = adis_check_status(adis); + + if (adis->data->self_test_no_autoclear) + adis_write_reg_16(adis, adis->data->msc_ctrl_reg, 0x00); + + return ret; } /** diff --git a/drivers/iio/imu/bmi160/Kconfig b/drivers/iio/imu/bmi160/Kconfig new file mode 100644 index 000000000000..005c17ccc2b0 --- /dev/null +++ b/drivers/iio/imu/bmi160/Kconfig @@ -0,0 +1,32 @@ +# +# BMI160 IMU driver +# + +config BMI160 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config BMI160_I2C + tristate "Bosch BMI160 I2C driver" + depends on I2C + select BMI160 + select REGMAP_I2C + help + If you say yes here you get support for BMI160 IMU on I2C with + accelerometer, gyroscope and external BMG160 magnetometer. + + This driver can also be built as a module. If so, the module will be + called bmi160_i2c. + +config BMI160_SPI + tristate "Bosch BMI160 SPI driver" + depends on SPI + select BMI160 + select REGMAP_SPI + help + If you say yes here you get support for BMI160 IMU on SPI with + accelerometer, gyroscope and external BMG160 magnetometer. + + This driver can also be built as a module. If so, the module will be + called bmi160_spi. diff --git a/drivers/iio/imu/bmi160/Makefile b/drivers/iio/imu/bmi160/Makefile new file mode 100644 index 000000000000..10365e493ae2 --- /dev/null +++ b/drivers/iio/imu/bmi160/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for Bosch BMI160 IMU +# +obj-$(CONFIG_BMI160) += bmi160_core.o +obj-$(CONFIG_BMI160_I2C) += bmi160_i2c.o +obj-$(CONFIG_BMI160_SPI) += bmi160_spi.o diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h new file mode 100644 index 000000000000..d2ae6ed70271 --- /dev/null +++ b/drivers/iio/imu/bmi160/bmi160.h @@ -0,0 +1,10 @@ +#ifndef BMI160_H_ +#define BMI160_H_ + +extern const struct regmap_config bmi160_regmap_config; + +int bmi160_core_probe(struct device *dev, struct regmap *regmap, + const char *name, bool use_spi); +void bmi160_core_remove(struct device *dev); + +#endif /* BMI160_H_ */ diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c new file mode 100644 index 000000000000..0bf92b06d7d8 --- /dev/null +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -0,0 +1,596 @@ +/* + * BMI160 - Bosch IMU (accel, gyro plus external magnetometer) + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO core driver for BMI160, with support for I2C/SPI busses + * + * TODO: magnetometer, interrupts, hardware FIFO + */ +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/acpi.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> + +#include "bmi160.h" + +#define BMI160_REG_CHIP_ID 0x00 +#define BMI160_CHIP_ID_VAL 0xD1 + +#define BMI160_REG_PMU_STATUS 0x03 + +/* X axis data low byte address, the rest can be obtained using axis offset */ +#define BMI160_REG_DATA_MAGN_XOUT_L 0x04 +#define BMI160_REG_DATA_GYRO_XOUT_L 0x0C +#define BMI160_REG_DATA_ACCEL_XOUT_L 0x12 + +#define BMI160_REG_ACCEL_CONFIG 0x40 +#define BMI160_ACCEL_CONFIG_ODR_MASK GENMASK(3, 0) +#define BMI160_ACCEL_CONFIG_BWP_MASK GENMASK(6, 4) + +#define BMI160_REG_ACCEL_RANGE 0x41 +#define BMI160_ACCEL_RANGE_2G 0x03 +#define BMI160_ACCEL_RANGE_4G 0x05 +#define BMI160_ACCEL_RANGE_8G 0x08 +#define BMI160_ACCEL_RANGE_16G 0x0C + +#define BMI160_REG_GYRO_CONFIG 0x42 +#define BMI160_GYRO_CONFIG_ODR_MASK GENMASK(3, 0) +#define BMI160_GYRO_CONFIG_BWP_MASK GENMASK(5, 4) + +#define BMI160_REG_GYRO_RANGE 0x43 +#define BMI160_GYRO_RANGE_2000DPS 0x00 +#define BMI160_GYRO_RANGE_1000DPS 0x01 +#define BMI160_GYRO_RANGE_500DPS 0x02 +#define BMI160_GYRO_RANGE_250DPS 0x03 +#define BMI160_GYRO_RANGE_125DPS 0x04 + +#define BMI160_REG_CMD 0x7E +#define BMI160_CMD_ACCEL_PM_SUSPEND 0x10 +#define BMI160_CMD_ACCEL_PM_NORMAL 0x11 +#define BMI160_CMD_ACCEL_PM_LOW_POWER 0x12 +#define BMI160_CMD_GYRO_PM_SUSPEND 0x14 +#define BMI160_CMD_GYRO_PM_NORMAL 0x15 +#define BMI160_CMD_GYRO_PM_FAST_STARTUP 0x17 +#define BMI160_CMD_SOFTRESET 0xB6 + +#define BMI160_REG_DUMMY 0x7F + +#define BMI160_ACCEL_PMU_MIN_USLEEP 3200 +#define BMI160_ACCEL_PMU_MAX_USLEEP 3800 +#define BMI160_GYRO_PMU_MIN_USLEEP 55000 +#define BMI160_GYRO_PMU_MAX_USLEEP 80000 +#define BMI160_SOFTRESET_USLEEP 1000 + +#define BMI160_CHANNEL(_type, _axis, _index) { \ + .type = _type, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ +} + +/* scan indexes follow DATA register order */ +enum bmi160_scan_axis { + BMI160_SCAN_EXT_MAGN_X = 0, + BMI160_SCAN_EXT_MAGN_Y, + BMI160_SCAN_EXT_MAGN_Z, + BMI160_SCAN_RHALL, + BMI160_SCAN_GYRO_X, + BMI160_SCAN_GYRO_Y, + BMI160_SCAN_GYRO_Z, + BMI160_SCAN_ACCEL_X, + BMI160_SCAN_ACCEL_Y, + BMI160_SCAN_ACCEL_Z, + BMI160_SCAN_TIMESTAMP, +}; + +enum bmi160_sensor_type { + BMI160_ACCEL = 0, + BMI160_GYRO, + BMI160_EXT_MAGN, + BMI160_NUM_SENSORS /* must be last */ +}; + +struct bmi160_data { + struct regmap *regmap; +}; + +const struct regmap_config bmi160_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; +EXPORT_SYMBOL(bmi160_regmap_config); + +struct bmi160_regs { + u8 data; /* LSB byte register for X-axis */ + u8 config; + u8 config_odr_mask; + u8 config_bwp_mask; + u8 range; + u8 pmu_cmd_normal; + u8 pmu_cmd_suspend; +}; + +static struct bmi160_regs bmi160_regs[] = { + [BMI160_ACCEL] = { + .data = BMI160_REG_DATA_ACCEL_XOUT_L, + .config = BMI160_REG_ACCEL_CONFIG, + .config_odr_mask = BMI160_ACCEL_CONFIG_ODR_MASK, + .config_bwp_mask = BMI160_ACCEL_CONFIG_BWP_MASK, + .range = BMI160_REG_ACCEL_RANGE, + .pmu_cmd_normal = BMI160_CMD_ACCEL_PM_NORMAL, + .pmu_cmd_suspend = BMI160_CMD_ACCEL_PM_SUSPEND, + }, + [BMI160_GYRO] = { + .data = BMI160_REG_DATA_GYRO_XOUT_L, + .config = BMI160_REG_GYRO_CONFIG, + .config_odr_mask = BMI160_GYRO_CONFIG_ODR_MASK, + .config_bwp_mask = BMI160_GYRO_CONFIG_BWP_MASK, + .range = BMI160_REG_GYRO_RANGE, + .pmu_cmd_normal = BMI160_CMD_GYRO_PM_NORMAL, + .pmu_cmd_suspend = BMI160_CMD_GYRO_PM_SUSPEND, + }, +}; + +struct bmi160_pmu_time { + unsigned long min; + unsigned long max; +}; + +static struct bmi160_pmu_time bmi160_pmu_time[] = { + [BMI160_ACCEL] = { + .min = BMI160_ACCEL_PMU_MIN_USLEEP, + .max = BMI160_ACCEL_PMU_MAX_USLEEP + }, + [BMI160_GYRO] = { + .min = BMI160_GYRO_PMU_MIN_USLEEP, + .max = BMI160_GYRO_PMU_MIN_USLEEP, + }, +}; + +struct bmi160_scale { + u8 bits; + int uscale; +}; + +struct bmi160_odr { + u8 bits; + int odr; + int uodr; +}; + +static const struct bmi160_scale bmi160_accel_scale[] = { + { BMI160_ACCEL_RANGE_2G, 598}, + { BMI160_ACCEL_RANGE_4G, 1197}, + { BMI160_ACCEL_RANGE_8G, 2394}, + { BMI160_ACCEL_RANGE_16G, 4788}, +}; + +static const struct bmi160_scale bmi160_gyro_scale[] = { + { BMI160_GYRO_RANGE_2000DPS, 1065}, + { BMI160_GYRO_RANGE_1000DPS, 532}, + { BMI160_GYRO_RANGE_500DPS, 266}, + { BMI160_GYRO_RANGE_250DPS, 133}, + { BMI160_GYRO_RANGE_125DPS, 66}, +}; + +struct bmi160_scale_item { + const struct bmi160_scale *tbl; + int num; +}; + +static const struct bmi160_scale_item bmi160_scale_table[] = { + [BMI160_ACCEL] = { + .tbl = bmi160_accel_scale, + .num = ARRAY_SIZE(bmi160_accel_scale), + }, + [BMI160_GYRO] = { + .tbl = bmi160_gyro_scale, + .num = ARRAY_SIZE(bmi160_gyro_scale), + }, +}; + +static const struct bmi160_odr bmi160_accel_odr[] = { + {0x01, 0, 78125}, + {0x02, 1, 5625}, + {0x03, 3, 125}, + {0x04, 6, 25}, + {0x05, 12, 5}, + {0x06, 25, 0}, + {0x07, 50, 0}, + {0x08, 100, 0}, + {0x09, 200, 0}, + {0x0A, 400, 0}, + {0x0B, 800, 0}, + {0x0C, 1600, 0}, +}; + +static const struct bmi160_odr bmi160_gyro_odr[] = { + {0x06, 25, 0}, + {0x07, 50, 0}, + {0x08, 100, 0}, + {0x09, 200, 0}, + {0x0A, 400, 0}, + {0x0B, 8000, 0}, + {0x0C, 1600, 0}, + {0x0D, 3200, 0}, +}; + +struct bmi160_odr_item { + const struct bmi160_odr *tbl; + int num; +}; + +static const struct bmi160_odr_item bmi160_odr_table[] = { + [BMI160_ACCEL] = { + .tbl = bmi160_accel_odr, + .num = ARRAY_SIZE(bmi160_accel_odr), + }, + [BMI160_GYRO] = { + .tbl = bmi160_gyro_odr, + .num = ARRAY_SIZE(bmi160_gyro_odr), + }, +}; + +static const struct iio_chan_spec bmi160_channels[] = { + BMI160_CHANNEL(IIO_ACCEL, X, BMI160_SCAN_ACCEL_X), + BMI160_CHANNEL(IIO_ACCEL, Y, BMI160_SCAN_ACCEL_Y), + BMI160_CHANNEL(IIO_ACCEL, Z, BMI160_SCAN_ACCEL_Z), + BMI160_CHANNEL(IIO_ANGL_VEL, X, BMI160_SCAN_GYRO_X), + BMI160_CHANNEL(IIO_ANGL_VEL, Y, BMI160_SCAN_GYRO_Y), + BMI160_CHANNEL(IIO_ANGL_VEL, Z, BMI160_SCAN_GYRO_Z), + IIO_CHAN_SOFT_TIMESTAMP(BMI160_SCAN_TIMESTAMP), +}; + +static enum bmi160_sensor_type bmi160_to_sensor(enum iio_chan_type iio_type) +{ + switch (iio_type) { + case IIO_ACCEL: + return BMI160_ACCEL; + case IIO_ANGL_VEL: + return BMI160_GYRO; + default: + return -EINVAL; + } +} + +static +int bmi160_set_mode(struct bmi160_data *data, enum bmi160_sensor_type t, + bool mode) +{ + int ret; + u8 cmd; + + if (mode) + cmd = bmi160_regs[t].pmu_cmd_normal; + else + cmd = bmi160_regs[t].pmu_cmd_suspend; + + ret = regmap_write(data->regmap, BMI160_REG_CMD, cmd); + if (ret < 0) + return ret; + + usleep_range(bmi160_pmu_time[t].min, bmi160_pmu_time[t].max); + + return 0; +} + +static +int bmi160_set_scale(struct bmi160_data *data, enum bmi160_sensor_type t, + int uscale) +{ + int i; + + for (i = 0; i < bmi160_scale_table[t].num; i++) + if (bmi160_scale_table[t].tbl[i].uscale == uscale) + break; + + if (i == bmi160_scale_table[t].num) + return -EINVAL; + + return regmap_write(data->regmap, bmi160_regs[t].range, + bmi160_scale_table[t].tbl[i].bits); +} + +static +int bmi160_get_scale(struct bmi160_data *data, enum bmi160_sensor_type t, + int *uscale) +{ + int i, ret, val; + + ret = regmap_read(data->regmap, bmi160_regs[t].range, &val); + if (ret < 0) + return ret; + + for (i = 0; i < bmi160_scale_table[t].num; i++) + if (bmi160_scale_table[t].tbl[i].bits == val) { + *uscale = bmi160_scale_table[t].tbl[i].uscale; + return 0; + } + + return -EINVAL; +} + +static int bmi160_get_data(struct bmi160_data *data, int chan_type, + int axis, int *val) +{ + u8 reg; + int ret; + __le16 sample; + enum bmi160_sensor_type t = bmi160_to_sensor(chan_type); + + reg = bmi160_regs[t].data + (axis - IIO_MOD_X) * sizeof(__le16); + + ret = regmap_bulk_read(data->regmap, reg, &sample, sizeof(__le16)); + if (ret < 0) + return ret; + + *val = sign_extend32(le16_to_cpu(sample), 15); + + return 0; +} + +static +int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t, + int odr, int uodr) +{ + int i; + + for (i = 0; i < bmi160_odr_table[t].num; i++) + if (bmi160_odr_table[t].tbl[i].odr == odr && + bmi160_odr_table[t].tbl[i].uodr == uodr) + break; + + if (i >= bmi160_odr_table[t].num) + return -EINVAL; + + return regmap_update_bits(data->regmap, + bmi160_regs[t].config, + bmi160_odr_table[t].tbl[i].bits, + bmi160_regs[t].config_odr_mask); +} + +static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t, + int *odr, int *uodr) +{ + int i, val, ret; + + ret = regmap_read(data->regmap, bmi160_regs[t].config, &val); + if (ret < 0) + return ret; + + val &= bmi160_regs[t].config_odr_mask; + + for (i = 0; i < bmi160_odr_table[t].num; i++) + if (val == bmi160_odr_table[t].tbl[i].bits) + break; + + if (i >= bmi160_odr_table[t].num) + return -EINVAL; + + *odr = bmi160_odr_table[t].tbl[i].odr; + *uodr = bmi160_odr_table[t].tbl[i].uodr; + + return 0; +} + +static irqreturn_t bmi160_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmi160_data *data = iio_priv(indio_dev); + s16 buf[16]; /* 3 sens x 3 axis x s16 + 3 x s16 pad + 4 x s16 tstamp */ + int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L; + __le16 sample; + + for_each_set_bit(i, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = regmap_bulk_read(data->regmap, base + i * sizeof(__le16), + &sample, sizeof(__le16)); + if (ret < 0) + goto done; + buf[j++] = sample; + } + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); +done: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int bmi160_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + struct bmi160_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = bmi160_get_data(data, chan->type, chan->channel2, val); + if (ret < 0) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + ret = bmi160_get_scale(data, + bmi160_to_sensor(chan->type), val2); + return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = bmi160_get_odr(data, bmi160_to_sensor(chan->type), + val, val2); + return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + + return 0; +} + +static int bmi160_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bmi160_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return bmi160_set_scale(data, + bmi160_to_sensor(chan->type), val2); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + return bmi160_set_odr(data, bmi160_to_sensor(chan->type), + val, val2); + default: + return -EINVAL; + } + + return 0; +} + +static const struct iio_info bmi160_info = { + .driver_module = THIS_MODULE, + .read_raw = bmi160_read_raw, + .write_raw = bmi160_write_raw, +}; + +static const char *bmi160_match_acpi_device(struct device *dev) +{ + const struct acpi_device_id *id; + + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return NULL; + + return dev_name(dev); +} + +static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) +{ + int ret; + unsigned int val; + struct device *dev = regmap_get_device(data->regmap); + + ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET); + if (ret < 0) + return ret; + + usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1); + + /* + * CS rising edge is needed before starting SPI, so do a dummy read + * See Section 3.2.1, page 86 of the datasheet + */ + if (use_spi) { + ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val); + if (ret < 0) + return ret; + } + + ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val); + if (ret < 0) { + dev_err(dev, "Error reading chip id\n"); + return ret; + } + if (val != BMI160_CHIP_ID_VAL) { + dev_err(dev, "Wrong chip id, got %x expected %x\n", + val, BMI160_CHIP_ID_VAL); + return -ENODEV; + } + + ret = bmi160_set_mode(data, BMI160_ACCEL, true); + if (ret < 0) + return ret; + + ret = bmi160_set_mode(data, BMI160_GYRO, true); + if (ret < 0) + return ret; + + return 0; +} + +static void bmi160_chip_uninit(struct bmi160_data *data) +{ + bmi160_set_mode(data, BMI160_GYRO, false); + bmi160_set_mode(data, BMI160_ACCEL, false); +} + +int bmi160_core_probe(struct device *dev, struct regmap *regmap, + const char *name, bool use_spi) +{ + struct iio_dev *indio_dev; + struct bmi160_data *data; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + data->regmap = regmap; + + ret = bmi160_chip_init(data, use_spi); + if (ret < 0) + return ret; + + if (!name && ACPI_HANDLE(dev)) + name = bmi160_match_acpi_device(dev); + + indio_dev->dev.parent = dev; + indio_dev->channels = bmi160_channels; + indio_dev->num_channels = ARRAY_SIZE(bmi160_channels); + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &bmi160_info; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + bmi160_trigger_handler, NULL); + if (ret < 0) + goto uninit; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto buffer_cleanup; + + return 0; +buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +uninit: + bmi160_chip_uninit(data); + return ret; +} +EXPORT_SYMBOL_GPL(bmi160_core_probe); + +void bmi160_core_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmi160_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + bmi160_chip_uninit(data); +} +EXPORT_SYMBOL_GPL(bmi160_core_remove); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_DESCRIPTION("Bosch BMI160 driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c new file mode 100644 index 000000000000..07a179d8fb48 --- /dev/null +++ b/drivers/iio/imu/bmi160/bmi160_i2c.c @@ -0,0 +1,72 @@ +/* + * BMI160 - Bosch IMU, I2C bits + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * 7-bit I2C slave address is: + * - 0x68 if SDO is pulled to GND + * - 0x69 if SDO is pulled to VDDIO + */ +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/acpi.h> + +#include "bmi160.h" + +static int bmi160_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const char *name = NULL; + + regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to register i2c regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + if (id) + name = id->name; + + return bmi160_core_probe(&client->dev, regmap, name, false); +} + +static int bmi160_i2c_remove(struct i2c_client *client) +{ + bmi160_core_remove(&client->dev); + + return 0; +} + +static const struct i2c_device_id bmi160_i2c_id[] = { + {"bmi160", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, bmi160_i2c_id); + +static const struct acpi_device_id bmi160_acpi_match[] = { + {"BMI0160", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match); + +static struct i2c_driver bmi160_i2c_driver = { + .driver = { + .name = "bmi160_i2c", + .acpi_match_table = ACPI_PTR(bmi160_acpi_match), + }, + .probe = bmi160_i2c_probe, + .remove = bmi160_i2c_remove, + .id_table = bmi160_i2c_id, +}; +module_i2c_driver(bmi160_i2c_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); +MODULE_DESCRIPTION("BMI160 I2C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c new file mode 100644 index 000000000000..1ec8b12bd984 --- /dev/null +++ b/drivers/iio/imu/bmi160/bmi160_spi.c @@ -0,0 +1,63 @@ +/* + * BMI160 - Bosch IMU, SPI bits + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/regmap.h> +#include <linux/acpi.h> + +#include "bmi160.h" + +static int bmi160_spi_probe(struct spi_device *spi) +{ + struct regmap *regmap; + const struct spi_device_id *id = spi_get_device_id(spi); + + regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Failed to register spi regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + return bmi160_core_probe(&spi->dev, regmap, id->name, true); +} + +static int bmi160_spi_remove(struct spi_device *spi) +{ + bmi160_core_remove(&spi->dev); + + return 0; +} + +static const struct spi_device_id bmi160_spi_id[] = { + {"bmi160", 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, bmi160_spi_id); + +static const struct acpi_device_id bmi160_acpi_match[] = { + {"BMI0160", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match); + +static struct spi_driver bmi160_spi_driver = { + .probe = bmi160_spi_probe, + .remove = bmi160_spi_remove, + .id_table = bmi160_spi_id, + .driver = { + .acpi_match_table = ACPI_PTR(bmi160_acpi_match), + .name = "bmi160_spi", + }, +}; +module_spi_driver(bmi160_spi_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_DESCRIPTION("Bosch BMI160 SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 847455a2d6bb..f756feecfa4c 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -13,10 +13,8 @@ config INV_MPU6050_I2C select INV_MPU6050_IIO select REGMAP_I2C help - This driver supports the Invensense MPU6050 devices. - This driver can also support MPU6500 in MPU6050 compatibility mode - and also in MPU6500 mode with some limitations. - It is a gyroscope/accelerometer combo device. + This driver supports the Invensense MPU6050/6500/9150 motion tracking + devices over I2C. This driver can be built as a module. The module will be called inv-mpu6050-i2c. @@ -26,7 +24,7 @@ config INV_MPU6050_SPI select INV_MPU6050_IIO select REGMAP_SPI help - This driver supports the Invensense MPU6050 devices. - It is a gyroscope/accelerometer combo device. + This driver supports the Invensense MPU6000/6500/9150 motion tracking + devices over SPI. This driver can be built as a module. The module will be called inv-mpu6050-spi. diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index d192953e9a38..b269b375ca34 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -88,16 +88,29 @@ static const struct inv_mpu6050_chip_config chip_config_6050 = { .accl_fs = INV_MPU6050_FS_02G, }; +/* Indexed by enum inv_devices */ static const struct inv_mpu6050_hw hw_info[] = { { - .num_reg = 117, + .whoami = INV_MPU6050_WHOAMI_VALUE, + .name = "MPU6050", + .reg = ®_set_6050, + .config = &chip_config_6050, + }, + { + .whoami = INV_MPU6500_WHOAMI_VALUE, .name = "MPU6500", .reg = ®_set_6500, .config = &chip_config_6050, }, { - .num_reg = 117, - .name = "MPU6050", + .whoami = INV_MPU6000_WHOAMI_VALUE, + .name = "MPU6000", + .reg = ®_set_6050, + .config = &chip_config_6050, + }, + { + .whoami = INV_MPU9150_WHOAMI_VALUE, + .name = "MPU9150", .reg = ®_set_6050, .config = &chip_config_6050, }, @@ -600,6 +613,10 @@ inv_fifo_rate_show(struct device *dev, struct device_attribute *attr, /** * inv_attr_show() - calling this function will show current * parameters. + * + * Deprecated in favor of IIO mounting matrix API. + * + * See inv_get_mount_matrix() */ static ssize_t inv_attr_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -644,6 +661,18 @@ static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev, return 0; } +static const struct iio_mount_matrix * +inv_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + return &((struct inv_mpu6050_state *)iio_priv(indio_dev))->orientation; +} + +static const struct iio_chan_spec_ext_info inv_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, inv_get_mount_matrix), + { }, +}; + #define INV_MPU6050_CHAN(_type, _channel2, _index) \ { \ .type = _type, \ @@ -660,6 +689,7 @@ static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev, .shift = 0, \ .endianness = IIO_BE, \ }, \ + .ext_info = inv_ext_info, \ } static const struct iio_chan_spec inv_mpu_channels[] = { @@ -692,14 +722,16 @@ static IIO_CONST_ATTR(in_accel_scale_available, "0.000598 0.001196 0.002392 0.004785"); static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, inv_fifo_rate_show, inv_mpu6050_fifo_rate_store); + +/* Deprecated: kept for userspace backward compatibility. */ static IIO_DEVICE_ATTR(in_gyro_matrix, S_IRUGO, inv_attr_show, NULL, ATTR_GYRO_MATRIX); static IIO_DEVICE_ATTR(in_accel_matrix, S_IRUGO, inv_attr_show, NULL, ATTR_ACCL_MATRIX); static struct attribute *inv_attributes[] = { - &iio_dev_attr_in_gyro_matrix.dev_attr.attr, - &iio_dev_attr_in_accel_matrix.dev_attr.attr, + &iio_dev_attr_in_gyro_matrix.dev_attr.attr, /* deprecated */ + &iio_dev_attr_in_accel_matrix.dev_attr.attr, /* deprecated */ &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_const_attr_sampling_frequency_available.dev_attr.attr, &iio_const_attr_in_accel_scale_available.dev_attr.attr, @@ -726,6 +758,7 @@ static const struct iio_info mpu_info = { static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) { int result; + unsigned int regval; st->hw = &hw_info[st->chip_type]; st->reg = hw_info[st->chip_type].reg; @@ -736,6 +769,17 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) if (result) return result; msleep(INV_MPU6050_POWER_UP_TIME); + + /* check chip self-identification */ + result = regmap_read(st->map, INV_MPU6050_REG_WHOAMI, ®val); + if (result) + return result; + if (regval != st->hw->whoami) { + dev_warn(regmap_get_device(st->map), + "whoami mismatch got %#02x expected %#02hhx for %s\n", + regval, st->hw->whoami, st->hw->name); + } + /* * toggle power state. After reset, the sleep bit could be on * or off depending on the OTP settings. Toggling power would @@ -774,14 +818,31 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, if (!indio_dev) return -ENOMEM; + BUILD_BUG_ON(ARRAY_SIZE(hw_info) != INV_NUM_PARTS); + if (chip_type < 0 || chip_type >= INV_NUM_PARTS) { + dev_err(dev, "Bad invensense chip_type=%d name=%s\n", + chip_type, name); + return -ENODEV; + } st = iio_priv(indio_dev); st->chip_type = chip_type; st->powerup_count = 0; st->irq = irq; st->map = regmap; + pdata = dev_get_platdata(dev); - if (pdata) + if (!pdata) { + result = of_iio_read_mount_matrix(dev, "mount-matrix", + &st->orientation); + if (result) { + dev_err(dev, "Failed to retrieve mounting matrix %d\n", + result); + return result; + } + } else { st->plat_data = *pdata; + } + /* power is turned on inside check chip type*/ result = inv_check_and_setup_chip(st); if (result) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c index 5ee4e0dc093e..1a424a6561de 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -202,13 +202,14 @@ static int inv_mpu_remove(struct i2c_client *client) static const struct i2c_device_id inv_mpu_id[] = { {"mpu6050", INV_MPU6050}, {"mpu6500", INV_MPU6500}, + {"mpu9150", INV_MPU9150}, {} }; MODULE_DEVICE_TABLE(i2c, inv_mpu_id); static const struct acpi_device_id inv_acpi_match[] = { - {"INVN6500", 0}, + {"INVN6500", INV_MPU6500}, { }, }; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index e302a49703bf..47ca25b94a73 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -68,6 +68,7 @@ enum inv_devices { INV_MPU6050, INV_MPU6500, INV_MPU6000, + INV_MPU9150, INV_NUM_PARTS }; @@ -93,13 +94,13 @@ struct inv_mpu6050_chip_config { /** * struct inv_mpu6050_hw - Other important hardware information. - * @num_reg: Number of registers on device. + * @whoami: Self identification byte from WHO_AM_I register * @name: name of the chip. * @reg: register map of the chip. * @config: configuration of the chip. */ struct inv_mpu6050_hw { - u8 num_reg; + u8 whoami; u8 *name; const struct inv_mpu6050_reg_map *reg; const struct inv_mpu6050_chip_config *config; @@ -114,7 +115,8 @@ struct inv_mpu6050_hw { * @hw: Other hardware-specific information. * @chip_type: chip type. * @time_stamp_lock: spin lock to time stamp. - * @plat_data: platform data. + * @plat_data: platform data (deprecated in favor of @orientation). + * @orientation: sensor chip orientation relative to main hardware. * @timestamps: kfifo queue to store time stamp. * @map regmap pointer. * @irq interrupt number. @@ -131,6 +133,7 @@ struct inv_mpu6050_state { struct i2c_client *mux_client; unsigned int powerup_count; struct inv_mpu6050_platform_data plat_data; + struct iio_mount_matrix orientation; DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE); struct regmap *map; int irq; @@ -215,6 +218,13 @@ struct inv_mpu6050_state { #define INV_MPU6050_MIN_FIFO_RATE 4 #define INV_MPU6050_ONE_K_HZ 1000 +#define INV_MPU6050_REG_WHOAMI 117 + +#define INV_MPU6000_WHOAMI_VALUE 0x68 +#define INV_MPU6050_WHOAMI_VALUE 0x68 +#define INV_MPU6500_WHOAMI_VALUE 0x70 +#define INV_MPU9150_WHOAMI_VALUE 0x68 + /* scan element definition */ enum inv_mpu6050_scan { INV_MPU6050_SCAN_ACCL_X, diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c index 7bcb8d839f05..190a4a51c830 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -44,9 +44,19 @@ static int inv_mpu_i2c_disable(struct iio_dev *indio_dev) static int inv_mpu_probe(struct spi_device *spi) { struct regmap *regmap; - const struct spi_device_id *id = spi_get_device_id(spi); - const char *name = id ? id->name : NULL; - const int chip_type = id ? id->driver_data : 0; + const struct spi_device_id *spi_id; + const struct acpi_device_id *acpi_id; + const char *name = NULL; + enum inv_devices chip_type; + + if ((spi_id = spi_get_device_id(spi))) { + chip_type = (enum inv_devices)spi_id->driver_data; + name = spi_id->name; + } else if ((acpi_id = acpi_match_device(spi->dev.driver->acpi_match_table, &spi->dev))) { + chip_type = (enum inv_devices)acpi_id->driver_data; + } else { + return -ENODEV; + } regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config); if (IS_ERR(regmap)) { @@ -70,13 +80,15 @@ static int inv_mpu_remove(struct spi_device *spi) */ static const struct spi_device_id inv_mpu_id[] = { {"mpu6000", INV_MPU6000}, + {"mpu6500", INV_MPU6500}, + {"mpu9150", INV_MPU9150}, {} }; MODULE_DEVICE_TABLE(spi, inv_mpu_id); static const struct acpi_device_id inv_acpi_match[] = { - {"INVN6000", 0}, + {"INVN6000", INV_MPU6000}, { }, }; MODULE_DEVICE_TABLE(acpi, inv_acpi_match); diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 190a5939fd8c..e6319a9346b2 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -412,6 +412,88 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, } EXPORT_SYMBOL_GPL(iio_enum_write); +static const struct iio_mount_matrix iio_mount_idmatrix = { + .rotation = { + "1", "0", "0", + "0", "1", "0", + "0", "0", "1" + } +}; + +static int iio_setup_mount_idmatrix(const struct device *dev, + struct iio_mount_matrix *matrix) +{ + *matrix = iio_mount_idmatrix; + dev_info(dev, "mounting matrix not found: using identity...\n"); + return 0; +} + +ssize_t iio_show_mount_matrix(struct iio_dev *indio_dev, uintptr_t priv, + const struct iio_chan_spec *chan, char *buf) +{ + const struct iio_mount_matrix *mtx = ((iio_get_mount_matrix_t *) + priv)(indio_dev, chan); + + if (IS_ERR(mtx)) + return PTR_ERR(mtx); + + if (!mtx) + mtx = &iio_mount_idmatrix; + + return snprintf(buf, PAGE_SIZE, "%s, %s, %s; %s, %s, %s; %s, %s, %s\n", + mtx->rotation[0], mtx->rotation[1], mtx->rotation[2], + mtx->rotation[3], mtx->rotation[4], mtx->rotation[5], + mtx->rotation[6], mtx->rotation[7], mtx->rotation[8]); +} +EXPORT_SYMBOL_GPL(iio_show_mount_matrix); + +/** + * of_iio_read_mount_matrix() - retrieve iio device mounting matrix from + * device-tree "mount-matrix" property + * @dev: device the mounting matrix property is assigned to + * @propname: device specific mounting matrix property name + * @matrix: where to store retrieved matrix + * + * If device is assigned no mounting matrix property, a default 3x3 identity + * matrix will be filled in. + * + * Return: 0 if success, or a negative error code on failure. + */ +#ifdef CONFIG_OF +int of_iio_read_mount_matrix(const struct device *dev, + const char *propname, + struct iio_mount_matrix *matrix) +{ + if (dev->of_node) { + int err = of_property_read_string_array(dev->of_node, + propname, matrix->rotation, + ARRAY_SIZE(iio_mount_idmatrix.rotation)); + + if (err == ARRAY_SIZE(iio_mount_idmatrix.rotation)) + return 0; + + if (err >= 0) + /* Invalid number of matrix entries. */ + return -EINVAL; + + if (err != -EINVAL) + /* Invalid matrix declaration format. */ + return err; + } + + /* Matrix was not declared at all: fallback to identity. */ + return iio_setup_mount_idmatrix(dev, matrix); +} +#else +int of_iio_read_mount_matrix(const struct device *dev, + const char *propname, + struct iio_mount_matrix *matrix) +{ + return iio_setup_mount_idmatrix(dev, matrix); +} +#endif +EXPORT_SYMBOL(of_iio_read_mount_matrix); + /** * iio_format_value() - Formats a IIO value into its string representation * @buf: The buffer to which the formatted value gets written diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 734a0042de0c..c4757e6367e7 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -356,6 +356,54 @@ void iio_channel_release(struct iio_channel *channel) } EXPORT_SYMBOL_GPL(iio_channel_release); +static void devm_iio_channel_free(struct device *dev, void *res) +{ + struct iio_channel *channel = *(struct iio_channel **)res; + + iio_channel_release(channel); +} + +static int devm_iio_channel_match(struct device *dev, void *res, void *data) +{ + struct iio_channel **r = res; + + if (!r || !*r) { + WARN_ON(!r || !*r); + return 0; + } + + return *r == data; +} + +struct iio_channel *devm_iio_channel_get(struct device *dev, + const char *channel_name) +{ + struct iio_channel **ptr, *channel; + + ptr = devres_alloc(devm_iio_channel_free, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + channel = iio_channel_get(dev, channel_name); + if (IS_ERR(channel)) { + devres_free(ptr); + return channel; + } + + *ptr = channel; + devres_add(dev, ptr); + + return channel; +} +EXPORT_SYMBOL_GPL(devm_iio_channel_get); + +void devm_iio_channel_release(struct device *dev, struct iio_channel *channel) +{ + WARN_ON(devres_release(dev, devm_iio_channel_free, + devm_iio_channel_match, channel)); +} +EXPORT_SYMBOL_GPL(devm_iio_channel_release); + struct iio_channel *iio_channel_get_all(struct device *dev) { const char *name; @@ -441,6 +489,42 @@ void iio_channel_release_all(struct iio_channel *channels) } EXPORT_SYMBOL_GPL(iio_channel_release_all); +static void devm_iio_channel_free_all(struct device *dev, void *res) +{ + struct iio_channel *channels = *(struct iio_channel **)res; + + iio_channel_release_all(channels); +} + +struct iio_channel *devm_iio_channel_get_all(struct device *dev) +{ + struct iio_channel **ptr, *channels; + + ptr = devres_alloc(devm_iio_channel_free_all, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + channels = iio_channel_get_all(dev); + if (IS_ERR(channels)) { + devres_free(ptr); + return channels; + } + + *ptr = channels; + devres_add(dev, ptr); + + return channels; +} +EXPORT_SYMBOL_GPL(devm_iio_channel_get_all); + +void devm_iio_channel_release_all(struct device *dev, + struct iio_channel *channels) +{ + WARN_ON(devres_release(dev, devm_iio_channel_free_all, + devm_iio_channel_match, channels)); +} +EXPORT_SYMBOL_GPL(devm_iio_channel_release_all); + static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, enum iio_chan_info_enum info) { @@ -452,7 +536,7 @@ static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, if (val2 == NULL) val2 = &unused; - if(!iio_channel_has_info(chan->channel, info)) + if (!iio_channel_has_info(chan->channel, info)) return -EINVAL; if (chan->indio_dev->info->read_raw_multi) { diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index cfd3df8416bb..7c566f516572 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -73,6 +73,17 @@ config BH1750 To compile this driver as a module, choose M here: the module will be called bh1750. +config BH1780 + tristate "ROHM BH1780 ambient light sensor" + depends on I2C + depends on !SENSORS_BH1780 + help + Say Y here to build support for the ROHM BH1780GLI ambient + light sensor. + + To compile this driver as a module, choose M here: the module will + be called bh1780. + config CM32181 depends on I2C tristate "CM32181 driver" @@ -223,6 +234,17 @@ config LTR501 This driver can also be built as a module. If so, the module will be called ltr501. +config MAX44000 + tristate "MAX44000 Ambient and Infrared Proximity Sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build support for Maxim Integrated's + MAX44000 ambient and infrared proximity sensor device. + + To compile this driver as a module, choose M here: + the module will be called max44000. + config OPT3001 tristate "Texas Instruments OPT3001 Light Sensor" depends on I2C @@ -320,4 +342,14 @@ config VCNL4000 To compile this driver as a module, choose M here: the module will be called vcnl4000. +config VEML6070 + tristate "VEML6070 UV A light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML6070 UV A + light sensor. + + To compile this driver as a module, choose M here: the + module will be called veml6070. + endmenu diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index b2c31053db0c..6f2a3c62de27 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_AL3320A) += al3320a.o obj-$(CONFIG_APDS9300) += apds9300.o obj-$(CONFIG_APDS9960) += apds9960.o obj-$(CONFIG_BH1750) += bh1750.o +obj-$(CONFIG_BH1780) += bh1780.o obj-$(CONFIG_CM32181) += cm32181.o obj-$(CONFIG_CM3232) += cm3232.o obj-$(CONFIG_CM3323) += cm3323.o @@ -20,6 +21,7 @@ obj-$(CONFIG_ISL29125) += isl29125.o obj-$(CONFIG_JSA1212) += jsa1212.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_LTR501) += ltr501.o +obj-$(CONFIG_MAX44000) += max44000.o obj-$(CONFIG_OPT3001) += opt3001.o obj-$(CONFIG_PA12203001) += pa12203001.o obj-$(CONFIG_RPR0521) += rpr0521.o @@ -30,3 +32,4 @@ obj-$(CONFIG_TCS3472) += tcs3472.o obj-$(CONFIG_TSL4531) += tsl4531.o obj-$(CONFIG_US5182D) += us5182d.o obj-$(CONFIG_VCNL4000) += vcnl4000.o +obj-$(CONFIG_VEML6070) += veml6070.o diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c index a6af56ad10e1..b4dbb3912977 100644 --- a/drivers/iio/light/apds9960.c +++ b/drivers/iio/light/apds9960.c @@ -321,8 +321,12 @@ static const struct iio_chan_spec apds9960_channels[] = { }; /* integration time in us */ -static const int apds9960_int_time[][2] = - { {28000, 246}, {100000, 219}, {200000, 182}, {700000, 0} }; +static const int apds9960_int_time[][2] = { + { 28000, 246}, + {100000, 219}, + {200000, 182}, + {700000, 0} +}; /* gain mapping */ static const int apds9960_pxs_gain_map[] = {1, 2, 4, 8}; @@ -491,9 +495,10 @@ static int apds9960_read_raw(struct iio_dev *indio_dev, case IIO_INTENSITY: ret = regmap_bulk_read(data->regmap, chan->address, &buf, 2); - if (!ret) + if (!ret) { ret = IIO_VAL_INT; - *val = le16_to_cpu(buf); + *val = le16_to_cpu(buf); + } break; default: ret = -EINVAL; diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c new file mode 100644 index 000000000000..72b364e4aa72 --- /dev/null +++ b/drivers/iio/light/bh1780.c @@ -0,0 +1,297 @@ +/* + * ROHM 1780GLI Ambient Light Sensor Driver + * + * Copyright (C) 2016 Linaro Ltd. + * Author: Linus Walleij <linus.walleij@linaro.org> + * Loosely based on the previous BH1780 ALS misc driver + * Copyright (C) 2010 Texas Instruments + * Author: Hemanth V <hemanthv@ti.com> + */ +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/bitops.h> + +#define BH1780_CMD_BIT BIT(7) +#define BH1780_REG_CONTROL 0x00 +#define BH1780_REG_PARTID 0x0A +#define BH1780_REG_MANFID 0x0B +#define BH1780_REG_DLOW 0x0C +#define BH1780_REG_DHIGH 0x0D + +#define BH1780_REVMASK GENMASK(3,0) +#define BH1780_POWMASK GENMASK(1,0) +#define BH1780_POFF (0x0) +#define BH1780_PON (0x3) + +/* power on settling time in ms */ +#define BH1780_PON_DELAY 2 +/* max time before value available in ms */ +#define BH1780_INTERVAL 250 + +struct bh1780_data { + struct i2c_client *client; +}; + +static int bh1780_write(struct bh1780_data *bh1780, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(bh1780->client, + BH1780_CMD_BIT | reg, + val); + if (ret < 0) + dev_err(&bh1780->client->dev, + "i2c_smbus_write_byte_data failed error " + "%d, register %01x\n", + ret, reg); + return ret; +} + +static int bh1780_read(struct bh1780_data *bh1780, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(bh1780->client, + BH1780_CMD_BIT | reg); + if (ret < 0) + dev_err(&bh1780->client->dev, + "i2c_smbus_read_byte_data failed error " + "%d, register %01x\n", + ret, reg); + return ret; +} + +static int bh1780_read_word(struct bh1780_data *bh1780, u8 reg) +{ + int ret = i2c_smbus_read_word_data(bh1780->client, + BH1780_CMD_BIT | reg); + if (ret < 0) + dev_err(&bh1780->client->dev, + "i2c_smbus_read_word_data failed error " + "%d, register %01x\n", + ret, reg); + return ret; +} + +static int bh1780_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, + unsigned int *readval) +{ + struct bh1780_data *bh1780 = iio_priv(indio_dev); + int ret; + + if (!readval) + bh1780_write(bh1780, (u8)reg, (u8)writeval); + + ret = bh1780_read(bh1780, (u8)reg); + if (ret < 0) + return ret; + + *readval = ret; + + return 0; +} + +static int bh1780_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bh1780_data *bh1780 = iio_priv(indio_dev); + int value; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_LIGHT: + pm_runtime_get_sync(&bh1780->client->dev); + value = bh1780_read_word(bh1780, BH1780_REG_DLOW); + if (value < 0) + return value; + pm_runtime_mark_last_busy(&bh1780->client->dev); + pm_runtime_put_autosuspend(&bh1780->client->dev); + *val = value; + + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_INT_TIME: + *val = 0; + *val2 = BH1780_INTERVAL * 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static const struct iio_info bh1780_info = { + .driver_module = THIS_MODULE, + .read_raw = bh1780_read_raw, + .debugfs_reg_access = bh1780_debugfs_reg_access, +}; + +static const struct iio_chan_spec bh1780_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_INT_TIME) + } +}; + +static int bh1780_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct bh1780_data *bh1780; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct iio_dev *indio_dev; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) + return -EIO; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*bh1780)); + if (!indio_dev) + return -ENOMEM; + + bh1780 = iio_priv(indio_dev); + bh1780->client = client; + i2c_set_clientdata(client, indio_dev); + + /* Power up the device */ + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); + if (ret < 0) + return ret; + msleep(BH1780_PON_DELAY); + pm_runtime_get_noresume(&client->dev); + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + + ret = bh1780_read(bh1780, BH1780_REG_PARTID); + if (ret < 0) + goto out_disable_pm; + dev_info(&client->dev, + "Ambient Light Sensor, Rev : %lu\n", + (ret & BH1780_REVMASK)); + + /* + * As the device takes 250 ms to even come up with a fresh + * measurement after power-on, do not shut it down unnecessarily. + * Set autosuspend to a five seconds. + */ + pm_runtime_set_autosuspend_delay(&client->dev, 5000); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_put(&client->dev); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &bh1780_info; + indio_dev->name = id->name; + indio_dev->channels = bh1780_channels; + indio_dev->num_channels = ARRAY_SIZE(bh1780_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = iio_device_register(indio_dev); + if (ret) + goto out_disable_pm; + return 0; + +out_disable_pm: + pm_runtime_put_noidle(&client->dev); + pm_runtime_disable(&client->dev); + return ret; +} + +static int bh1780_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct bh1780_data *bh1780 = iio_priv(indio_dev); + int ret; + + iio_device_unregister(indio_dev); + pm_runtime_get_sync(&client->dev); + pm_runtime_put_noidle(&client->dev); + pm_runtime_disable(&client->dev); + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); + if (ret < 0) { + dev_err(&client->dev, "failed to power off\n"); + return ret; + } + + return 0; +} + +#ifdef CONFIG_PM +static int bh1780_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bh1780_data *bh1780 = i2c_get_clientdata(client); + int ret; + + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); + if (ret < 0) { + dev_err(dev, "failed to runtime suspend\n"); + return ret; + } + + return 0; +} + +static int bh1780_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bh1780_data *bh1780 = i2c_get_clientdata(client); + int ret; + + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); + if (ret < 0) { + dev_err(dev, "failed to runtime resume\n"); + return ret; + } + + /* Wait for power on, then for a value to be available */ + msleep(BH1780_PON_DELAY + BH1780_INTERVAL); + + return 0; +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops bh1780_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(bh1780_runtime_suspend, + bh1780_runtime_resume, NULL) +}; + +static const struct i2c_device_id bh1780_id[] = { + { "bh1780", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, bh1780_id); + +#ifdef CONFIG_OF +static const struct of_device_id of_bh1780_match[] = { + { .compatible = "rohm,bh1780gli", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_bh1780_match); +#endif + +static struct i2c_driver bh1780_driver = { + .probe = bh1780_probe, + .remove = bh1780_remove, + .id_table = bh1780_id, + .driver = { + .name = "bh1780", + .pm = &bh1780_dev_pm_ops, + .of_match_table = of_match_ptr(of_bh1780_match), + }, +}; + +module_i2c_driver(bh1780_driver); + +MODULE_DESCRIPTION("ROHM BH1780GLI Ambient Light Sensor Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c new file mode 100644 index 000000000000..e01e58a9bd14 --- /dev/null +++ b/drivers/iio/light/max44000.c @@ -0,0 +1,639 @@ +/* + * MAX44000 Ambient and Infrared Proximity Sensor + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Data sheet: https://datasheets.maximintegrated.com/en/ds/MAX44000.pdf + * + * 7-bit I2C slave address 0x4a + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/util_macros.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/acpi.h> + +#define MAX44000_DRV_NAME "max44000" + +/* Registers in datasheet order */ +#define MAX44000_REG_STATUS 0x00 +#define MAX44000_REG_CFG_MAIN 0x01 +#define MAX44000_REG_CFG_RX 0x02 +#define MAX44000_REG_CFG_TX 0x03 +#define MAX44000_REG_ALS_DATA_HI 0x04 +#define MAX44000_REG_ALS_DATA_LO 0x05 +#define MAX44000_REG_PRX_DATA 0x16 +#define MAX44000_REG_ALS_UPTHR_HI 0x06 +#define MAX44000_REG_ALS_UPTHR_LO 0x07 +#define MAX44000_REG_ALS_LOTHR_HI 0x08 +#define MAX44000_REG_ALS_LOTHR_LO 0x09 +#define MAX44000_REG_PST 0x0a +#define MAX44000_REG_PRX_IND 0x0b +#define MAX44000_REG_PRX_THR 0x0c +#define MAX44000_REG_TRIM_GAIN_GREEN 0x0f +#define MAX44000_REG_TRIM_GAIN_IR 0x10 + +/* REG_CFG bits */ +#define MAX44000_CFG_ALSINTE 0x01 +#define MAX44000_CFG_PRXINTE 0x02 +#define MAX44000_CFG_MASK 0x1c +#define MAX44000_CFG_MODE_SHUTDOWN 0x00 +#define MAX44000_CFG_MODE_ALS_GIR 0x04 +#define MAX44000_CFG_MODE_ALS_G 0x08 +#define MAX44000_CFG_MODE_ALS_IR 0x0c +#define MAX44000_CFG_MODE_ALS_PRX 0x10 +#define MAX44000_CFG_MODE_PRX 0x14 +#define MAX44000_CFG_TRIM 0x20 + +/* + * Upper 4 bits are not documented but start as 1 on powerup + * Setting them to 0 causes proximity to misbehave so set them to 1 + */ +#define MAX44000_REG_CFG_RX_DEFAULT 0xf0 + +/* REG_RX bits */ +#define MAX44000_CFG_RX_ALSTIM_MASK 0x0c +#define MAX44000_CFG_RX_ALSTIM_SHIFT 2 +#define MAX44000_CFG_RX_ALSPGA_MASK 0x03 +#define MAX44000_CFG_RX_ALSPGA_SHIFT 0 + +/* REG_TX bits */ +#define MAX44000_LED_CURRENT_MASK 0xf +#define MAX44000_LED_CURRENT_MAX 11 +#define MAX44000_LED_CURRENT_DEFAULT 6 + +#define MAX44000_ALSDATA_OVERFLOW 0x4000 + +struct max44000_data { + struct mutex lock; + struct regmap *regmap; +}; + +/* Default scale is set to the minimum of 0.03125 or 1 / (1 << 5) lux */ +#define MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 5 + +/* Scale can be multiplied by up to 128x via ALSPGA for measurement gain */ +static const int max44000_alspga_shift[] = {0, 2, 4, 7}; +#define MAX44000_ALSPGA_MAX_SHIFT 7 + +/* + * Scale can be multiplied by up to 64x via ALSTIM because of lost resolution + * + * This scaling factor is hidden from userspace and instead accounted for when + * reading raw values from the device. + * + * This makes it possible to cleanly expose ALSPGA as IIO_CHAN_INFO_SCALE and + * ALSTIM as IIO_CHAN_INFO_INT_TIME without the values affecting each other. + * + * Handling this internally is also required for buffer support because the + * channel's scan_type can't be modified dynamically. + */ +static const int max44000_alstim_shift[] = {0, 2, 4, 6}; +#define MAX44000_ALSTIM_SHIFT(alstim) (2 * (alstim)) + +/* Available integration times with pretty manual alignment: */ +static const int max44000_int_time_avail_ns_array[] = { + 100000000, + 25000000, + 6250000, + 1562500, +}; +static const char max44000_int_time_avail_str[] = + "0.100 " + "0.025 " + "0.00625 " + "0.001625"; + +/* Available scales (internal to ulux) with pretty manual alignment: */ +static const int max44000_scale_avail_ulux_array[] = { + 31250, + 125000, + 500000, + 4000000, +}; +static const char max44000_scale_avail_str[] = + "0.03125 " + "0.125 " + "0.5 " + "4"; + +#define MAX44000_SCAN_INDEX_ALS 0 +#define MAX44000_SCAN_INDEX_PRX 1 + +static const struct iio_chan_spec max44000_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_INT_TIME), + .scan_index = MAX44000_SCAN_INDEX_ALS, + .scan_type = { + .sign = 'u', + .realbits = 14, + .storagebits = 16, + } + }, + { + .type = IIO_PROXIMITY, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = MAX44000_SCAN_INDEX_PRX, + .scan_type = { + .sign = 'u', + .realbits = 8, + .storagebits = 16, + } + }, + IIO_CHAN_SOFT_TIMESTAMP(2), + { + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "led", + .output = 1, + .scan_index = -1, + }, +}; + +static int max44000_read_alstim(struct max44000_data *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); + if (ret < 0) + return ret; + return (val & MAX44000_CFG_RX_ALSTIM_MASK) >> MAX44000_CFG_RX_ALSTIM_SHIFT; +} + +static int max44000_write_alstim(struct max44000_data *data, int val) +{ + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, + MAX44000_CFG_RX_ALSTIM_MASK, + val << MAX44000_CFG_RX_ALSTIM_SHIFT); +} + +static int max44000_read_alspga(struct max44000_data *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); + if (ret < 0) + return ret; + return (val & MAX44000_CFG_RX_ALSPGA_MASK) >> MAX44000_CFG_RX_ALSPGA_SHIFT; +} + +static int max44000_write_alspga(struct max44000_data *data, int val) +{ + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, + MAX44000_CFG_RX_ALSPGA_MASK, + val << MAX44000_CFG_RX_ALSPGA_SHIFT); +} + +static int max44000_read_alsval(struct max44000_data *data) +{ + u16 regval; + int alstim, ret; + + ret = regmap_bulk_read(data->regmap, MAX44000_REG_ALS_DATA_HI, + ®val, sizeof(regval)); + if (ret < 0) + return ret; + alstim = ret = max44000_read_alstim(data); + if (ret < 0) + return ret; + + regval = be16_to_cpu(regval); + + /* + * Overflow is explained on datasheet page 17. + * + * It's a warning that either the G or IR channel has become saturated + * and that the value in the register is likely incorrect. + * + * The recommendation is to change the scale (ALSPGA). + * The driver just returns the max representable value. + */ + if (regval & MAX44000_ALSDATA_OVERFLOW) + return 0x3FFF; + + return regval << MAX44000_ALSTIM_SHIFT(alstim); +} + +static int max44000_write_led_current_raw(struct max44000_data *data, int val) +{ + /* Maybe we should clamp the value instead? */ + if (val < 0 || val > MAX44000_LED_CURRENT_MAX) + return -ERANGE; + if (val >= 8) + val += 4; + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_TX, + MAX44000_LED_CURRENT_MASK, val); +} + +static int max44000_read_led_current_raw(struct max44000_data *data) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, MAX44000_REG_CFG_TX, ®val); + if (ret < 0) + return ret; + regval &= MAX44000_LED_CURRENT_MASK; + if (regval >= 8) + regval -= 4; + return regval; +} + +static int max44000_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max44000_data *data = iio_priv(indio_dev); + int alstim, alspga; + unsigned int regval; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_LIGHT: + mutex_lock(&data->lock); + ret = max44000_read_alsval(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + + case IIO_PROXIMITY: + mutex_lock(&data->lock); + ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = regval; + return IIO_VAL_INT; + + case IIO_CURRENT: + mutex_lock(&data->lock); + ret = max44000_read_led_current_raw(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_CURRENT: + /* Output register is in 10s of miliamps */ + *val = 10; + return IIO_VAL_INT; + + case IIO_LIGHT: + mutex_lock(&data->lock); + alspga = ret = max44000_read_alspga(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + + /* Avoid negative shifts */ + *val = (1 << MAX44000_ALSPGA_MAX_SHIFT); + *val2 = MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 + + MAX44000_ALSPGA_MAX_SHIFT + - max44000_alspga_shift[alspga]; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_INT_TIME: + mutex_lock(&data->lock); + alstim = ret = max44000_read_alstim(data); + mutex_unlock(&data->lock); + + if (ret < 0) + return ret; + *val = 0; + *val2 = max44000_int_time_avail_ns_array[alstim]; + return IIO_VAL_INT_PLUS_NANO; + + default: + return -EINVAL; + } +} + +static int max44000_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct max44000_data *data = iio_priv(indio_dev); + int ret; + + if (mask == IIO_CHAN_INFO_RAW && chan->type == IIO_CURRENT) { + mutex_lock(&data->lock); + ret = max44000_write_led_current_raw(data, val); + mutex_unlock(&data->lock); + return ret; + } else if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) { + s64 valns = val * NSEC_PER_SEC + val2; + int alstim = find_closest_descending(valns, + max44000_int_time_avail_ns_array, + ARRAY_SIZE(max44000_int_time_avail_ns_array)); + mutex_lock(&data->lock); + ret = max44000_write_alstim(data, alstim); + mutex_unlock(&data->lock); + return ret; + } else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) { + s64 valus = val * USEC_PER_SEC + val2; + int alspga = find_closest(valus, + max44000_scale_avail_ulux_array, + ARRAY_SIZE(max44000_scale_avail_ulux_array)); + mutex_lock(&data->lock); + ret = max44000_write_alspga(data, alspga); + mutex_unlock(&data->lock); + return ret; + } + + return -EINVAL; +} + +static int max44000_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) + return IIO_VAL_INT_PLUS_NANO; + else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) + return IIO_VAL_INT_PLUS_MICRO; + else + return IIO_VAL_INT; +} + +static IIO_CONST_ATTR(illuminance_integration_time_available, max44000_int_time_avail_str); +static IIO_CONST_ATTR(illuminance_scale_available, max44000_scale_avail_str); + +static struct attribute *max44000_attributes[] = { + &iio_const_attr_illuminance_integration_time_available.dev_attr.attr, + &iio_const_attr_illuminance_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group max44000_attribute_group = { + .attrs = max44000_attributes, +}; + +static const struct iio_info max44000_info = { + .driver_module = THIS_MODULE, + .read_raw = max44000_read_raw, + .write_raw = max44000_write_raw, + .write_raw_get_fmt = max44000_write_raw_get_fmt, + .attrs = &max44000_attribute_group, +}; + +static bool max44000_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX44000_REG_STATUS: + case MAX44000_REG_CFG_MAIN: + case MAX44000_REG_CFG_RX: + case MAX44000_REG_CFG_TX: + case MAX44000_REG_ALS_DATA_HI: + case MAX44000_REG_ALS_DATA_LO: + case MAX44000_REG_PRX_DATA: + case MAX44000_REG_ALS_UPTHR_HI: + case MAX44000_REG_ALS_UPTHR_LO: + case MAX44000_REG_ALS_LOTHR_HI: + case MAX44000_REG_ALS_LOTHR_LO: + case MAX44000_REG_PST: + case MAX44000_REG_PRX_IND: + case MAX44000_REG_PRX_THR: + case MAX44000_REG_TRIM_GAIN_GREEN: + case MAX44000_REG_TRIM_GAIN_IR: + return true; + default: + return false; + } +} + +static bool max44000_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX44000_REG_CFG_MAIN: + case MAX44000_REG_CFG_RX: + case MAX44000_REG_CFG_TX: + case MAX44000_REG_ALS_UPTHR_HI: + case MAX44000_REG_ALS_UPTHR_LO: + case MAX44000_REG_ALS_LOTHR_HI: + case MAX44000_REG_ALS_LOTHR_LO: + case MAX44000_REG_PST: + case MAX44000_REG_PRX_IND: + case MAX44000_REG_PRX_THR: + case MAX44000_REG_TRIM_GAIN_GREEN: + case MAX44000_REG_TRIM_GAIN_IR: + return true; + default: + return false; + } +} + +static bool max44000_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX44000_REG_STATUS: + case MAX44000_REG_ALS_DATA_HI: + case MAX44000_REG_ALS_DATA_LO: + case MAX44000_REG_PRX_DATA: + return true; + default: + return false; + } +} + +static bool max44000_precious_reg(struct device *dev, unsigned int reg) +{ + return reg == MAX44000_REG_STATUS; +} + +static const struct regmap_config max44000_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = MAX44000_REG_PRX_DATA, + .readable_reg = max44000_readable_reg, + .writeable_reg = max44000_writeable_reg, + .volatile_reg = max44000_volatile_reg, + .precious_reg = max44000_precious_reg, + + .use_single_rw = 1, + .cache_type = REGCACHE_RBTREE, +}; + +static irqreturn_t max44000_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct max44000_data *data = iio_priv(indio_dev); + u16 buf[8]; /* 2x u16 + padding + 8 bytes timestamp */ + int index = 0; + unsigned int regval; + int ret; + + mutex_lock(&data->lock); + if (test_bit(MAX44000_SCAN_INDEX_ALS, indio_dev->active_scan_mask)) { + ret = max44000_read_alsval(data); + if (ret < 0) + goto out_unlock; + buf[index++] = ret; + } + if (test_bit(MAX44000_SCAN_INDEX_PRX, indio_dev->active_scan_mask)) { + ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); + if (ret < 0) + goto out_unlock; + buf[index] = regval; + } + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; + +out_unlock: + mutex_unlock(&data->lock); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int max44000_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max44000_data *data; + struct iio_dev *indio_dev; + int ret, reg; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + data = iio_priv(indio_dev); + data->regmap = devm_regmap_init_i2c(client, &max44000_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "regmap_init failed!\n"); + return PTR_ERR(data->regmap); + } + + i2c_set_clientdata(client, indio_dev); + mutex_init(&data->lock); + indio_dev->dev.parent = &client->dev; + indio_dev->info = &max44000_info; + indio_dev->name = MAX44000_DRV_NAME; + indio_dev->channels = max44000_channels; + indio_dev->num_channels = ARRAY_SIZE(max44000_channels); + + /* + * The device doesn't have a reset function so we just clear some + * important bits at probe time to ensure sane operation. + * + * Since we don't support interrupts/events the threshold values are + * not important. We also don't touch trim values. + */ + + /* Reset ALS scaling bits */ + ret = regmap_write(data->regmap, MAX44000_REG_CFG_RX, + MAX44000_REG_CFG_RX_DEFAULT); + if (ret < 0) { + dev_err(&client->dev, "failed to write default CFG_RX: %d\n", + ret); + return ret; + } + + /* + * By default the LED pulse used for the proximity sensor is disabled. + * Set a middle value so that we get some sort of valid data by default. + */ + ret = max44000_write_led_current_raw(data, MAX44000_LED_CURRENT_DEFAULT); + if (ret < 0) { + dev_err(&client->dev, "failed to write init config: %d\n", ret); + return ret; + } + + /* Reset CFG bits to ALS_PRX mode which allows easy reading of both values. */ + reg = MAX44000_CFG_TRIM | MAX44000_CFG_MODE_ALS_PRX; + ret = regmap_write(data->regmap, MAX44000_REG_CFG_MAIN, reg); + if (ret < 0) { + dev_err(&client->dev, "failed to write init config: %d\n", ret); + return ret; + } + + /* Read status at least once to clear any stale interrupt bits. */ + ret = regmap_read(data->regmap, MAX44000_REG_STATUS, ®); + if (ret < 0) { + dev_err(&client->dev, "failed to read init status: %d\n", ret); + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, NULL, max44000_trigger_handler, NULL); + if (ret < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + return ret; + } + + return iio_device_register(indio_dev); +} + +static int max44000_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + return 0; +} + +static const struct i2c_device_id max44000_id[] = { + {"max44000", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, max44000_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max44000_acpi_match[] = { + {"MAX44000", 0}, + { } +}; +MODULE_DEVICE_TABLE(acpi, max44000_acpi_match); +#endif + +static struct i2c_driver max44000_driver = { + .driver = { + .name = MAX44000_DRV_NAME, + .acpi_match_table = ACPI_PTR(max44000_acpi_match), + }, + .probe = max44000_probe, + .remove = max44000_remove, + .id_table = max44000_id, +}; + +module_i2c_driver(max44000_driver); + +MODULE_AUTHOR("Crestez Dan Leonard <leonard.crestez@intel.com>"); +MODULE_DESCRIPTION("MAX44000 Ambient and Infrared Proximity Sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/light/veml6070.c b/drivers/iio/light/veml6070.c new file mode 100644 index 000000000000..bc1c4cb782cd --- /dev/null +++ b/drivers/iio/light/veml6070.c @@ -0,0 +1,218 @@ +/* + * veml6070.c - Support for Vishay VEML6070 UV A light sensor + * + * Copyright 2016 Peter Meerwald-Stadler <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for VEML6070 (7-bit I2C slave addresses 0x38 and 0x39) + * + * TODO: integration time, ACK signal + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define VEML6070_DRV_NAME "veml6070" + +#define VEML6070_ADDR_CONFIG_DATA_MSB 0x38 /* read: MSB data, write: config */ +#define VEML6070_ADDR_DATA_LSB 0x39 /* LSB data */ + +#define VEML6070_COMMAND_ACK BIT(5) /* raise interrupt when over threshold */ +#define VEML6070_COMMAND_IT GENMASK(3, 2) /* bit mask integration time */ +#define VEML6070_COMMAND_RSRVD BIT(1) /* reserved, set to 1 */ +#define VEML6070_COMMAND_SD BIT(0) /* shutdown mode when set */ + +#define VEML6070_IT_10 0x04 /* integration time 1x */ + +struct veml6070_data { + struct i2c_client *client1; + struct i2c_client *client2; + u8 config; + struct mutex lock; +}; + +static int veml6070_read(struct veml6070_data *data) +{ + int ret; + u8 msb, lsb; + + mutex_lock(&data->lock); + + /* disable shutdown */ + ret = i2c_smbus_write_byte(data->client1, + data->config & ~VEML6070_COMMAND_SD); + if (ret < 0) + goto out; + + msleep(125 + 10); /* measurement takes up to 125 ms for IT 1x */ + + ret = i2c_smbus_read_byte(data->client2); /* read MSB, address 0x39 */ + if (ret < 0) + goto out; + msb = ret; + + ret = i2c_smbus_read_byte(data->client1); /* read LSB, address 0x38 */ + if (ret < 0) + goto out; + lsb = ret; + + /* shutdown again */ + ret = i2c_smbus_write_byte(data->client1, data->config); + if (ret < 0) + goto out; + + ret = (msb << 8) | lsb; + +out: + mutex_unlock(&data->lock); + return ret; +} + +static const struct iio_chan_spec veml6070_channels[] = { + { + .type = IIO_INTENSITY, + .modified = 1, + .channel2 = IIO_MOD_LIGHT_UV, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + }, + { + .type = IIO_UVINDEX, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + } +}; + +static int veml6070_to_uv_index(unsigned val) +{ + /* + * conversion of raw UV intensity values to UV index depends on + * integration time (IT) and value of the resistor connected to + * the RSET pin (default: 270 KOhm) + */ + unsigned uvi[11] = { + 187, 373, 560, /* low */ + 746, 933, 1120, /* moderate */ + 1308, 1494, /* high */ + 1681, 1868, 2054}; /* very high */ + int i; + + for (i = 0; i < ARRAY_SIZE(uvi); i++) + if (val <= uvi[i]) + return i; + + return 11; /* extreme */ +} + +static int veml6070_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct veml6070_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + ret = veml6070_read(data); + if (ret < 0) + return ret; + if (mask == IIO_CHAN_INFO_PROCESSED) + *val = veml6070_to_uv_index(ret); + else + *val = ret; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static const struct iio_info veml6070_info = { + .read_raw = veml6070_read_raw, + .driver_module = THIS_MODULE, +}; + +static int veml6070_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct veml6070_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client1 = client; + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &veml6070_info; + indio_dev->channels = veml6070_channels; + indio_dev->num_channels = ARRAY_SIZE(veml6070_channels); + indio_dev->name = VEML6070_DRV_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + + data->client2 = i2c_new_dummy(client->adapter, VEML6070_ADDR_DATA_LSB); + if (!data->client2) { + dev_err(&client->dev, "i2c device for second chip address failed\n"); + return -ENODEV; + } + + data->config = VEML6070_IT_10 | VEML6070_COMMAND_RSRVD | + VEML6070_COMMAND_SD; + ret = i2c_smbus_write_byte(data->client1, data->config); + if (ret < 0) + goto fail; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto fail; + + return ret; + +fail: + i2c_unregister_device(data->client2); + return ret; +} + +static int veml6070_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct veml6070_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + i2c_unregister_device(data->client2); + + return 0; +} + +static const struct i2c_device_id veml6070_id[] = { + { "veml6070", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, veml6070_id); + +static struct i2c_driver veml6070_driver = { + .driver = { + .name = VEML6070_DRV_NAME, + }, + .probe = veml6070_probe, + .remove = veml6070_remove, + .id_table = veml6070_id, +}; + +module_i2c_driver(veml6070_driver); + +MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("Vishay VEML6070 UV A light sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 021dc5361f53..84e6559ccc65 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -9,6 +9,8 @@ config AK8975 tristate "Asahi Kasei AK 3-Axis Magnetometer" depends on I2C depends on GPIOLIB || COMPILE_TEST + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Asahi Kasei AK8975, AK8963, AK09911 or AK09912 3-Axis Magnetometer. @@ -25,22 +27,41 @@ config AK09911 Deprecated: AK09911 is now supported by AK8975 driver. config BMC150_MAGN - tristate "Bosch BMC150 Magnetometer Driver" - depends on I2C - select REGMAP_I2C + tristate select IIO_BUFFER select IIO_TRIGGERED_BUFFER + +config BMC150_MAGN_I2C + tristate "Bosch BMC150 I2C Magnetometer Driver" + depends on I2C + select BMC150_MAGN + select REGMAP_I2C help - Say yes here to build support for the BMC150 magnetometer. + Say yes here to build support for the BMC150 magnetometer with + I2C interface. - Currently this only supports the device via an i2c interface. + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing magnetometer part, which has + its own address and register map. + + To compile this driver as a module, choose M here: the module will be + called bmc150_magn_i2c. + +config BMC150_MAGN_SPI + tristate "Bosch BMC150 SPI Magnetometer Driver" + depends on SPI + select BMC150_MAGN + select REGMAP_SPI + help + Say yes here to build support for the BMC150 magnetometer with + SPI interface. This is a combo module with both accelerometer and magnetometer. This driver is only implementing magnetometer part, which has its own address and register map. To compile this driver as a module, choose M here: the module will be - called bmc150_magn. + called bmc150_magn_spi. config MAG3110 tristate "Freescale MAG3110 3-Axis Magnetometer" diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index dd03fe524481..92a745c9a6e8 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -5,6 +5,9 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_AK8975) += ak8975.o obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o +obj-$(CONFIG_BMC150_MAGN_I2C) += bmc150_magn_i2c.o +obj-$(CONFIG_BMC150_MAGN_SPI) += bmc150_magn_spi.o + obj-$(CONFIG_MAG3110) += mag3110.o obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o obj-$(CONFIG_MMC35240) += mmc35240.o diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index 48d127a45d90..dbf066129a04 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -36,6 +36,13 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include <linux/iio/magnetometer/ak8975.h> + /* * Register definitions, as well as various shifts and masks to get at the * individual fields of the registers. @@ -370,6 +377,7 @@ struct ak8975_data { wait_queue_head_t data_ready_queue; unsigned long flags; u8 cntl_cache; + struct iio_mount_matrix orientation; struct regulator *vdd; }; @@ -633,22 +641,15 @@ static int wait_conversion_complete_interrupt(struct ak8975_data *data) return ret > 0 ? 0 : -ETIME; } -/* - * Emits the raw flux value for the x, y, or z axis. - */ -static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) +static int ak8975_start_read_axis(struct ak8975_data *data, + const struct i2c_client *client) { - struct ak8975_data *data = iio_priv(indio_dev); - struct i2c_client *client = data->client; - int ret; - - mutex_lock(&data->lock); - /* Set up the device for taking a sample. */ - ret = ak8975_set_mode(data, MODE_ONCE); + int ret = ak8975_set_mode(data, MODE_ONCE); + if (ret < 0) { dev_err(&client->dev, "Error in setting operating mode\n"); - goto exit; + return ret; } /* Wait for the conversion to complete. */ @@ -659,7 +660,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) else ret = wait_conversion_complete_polled(data); if (ret < 0) - goto exit; + return ret; /* This will be executed only for non-interrupt based waiting case */ if (ret & data->def->ctrl_masks[ST1_DRDY]) { @@ -667,32 +668,45 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) data->def->ctrl_regs[ST2]); if (ret < 0) { dev_err(&client->dev, "Error in reading ST2\n"); - goto exit; + return ret; } if (ret & (data->def->ctrl_masks[ST2_DERR] | data->def->ctrl_masks[ST2_HOFL])) { dev_err(&client->dev, "ST2 status error 0x%x\n", ret); - ret = -EINVAL; - goto exit; + return -EINVAL; } } - /* Read the flux value from the appropriate register - (the register is specified in the iio device attributes). */ - ret = i2c_smbus_read_word_data(client, data->def->data_regs[index]); - if (ret < 0) { - dev_err(&client->dev, "Read axis data fails\n"); + return 0; +} + +/* Retrieve raw flux value for one of the x, y, or z axis. */ +static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) +{ + struct ak8975_data *data = iio_priv(indio_dev); + const struct i2c_client *client = data->client; + const struct ak_def *def = data->def; + int ret; + + mutex_lock(&data->lock); + + ret = ak8975_start_read_axis(data, client); + if (ret) + goto exit; + + ret = i2c_smbus_read_word_data(client, def->data_regs[index]); + if (ret < 0) goto exit; - } mutex_unlock(&data->lock); /* Clamp to valid range. */ - *val = clamp_t(s16, ret, -data->def->range, data->def->range); + *val = clamp_t(s16, ret, -def->range, def->range); return IIO_VAL_INT; exit: mutex_unlock(&data->lock); + dev_err(&client->dev, "Error in reading axis\n"); return ret; } @@ -714,6 +728,18 @@ static int ak8975_read_raw(struct iio_dev *indio_dev, return -EINVAL; } +static const struct iio_mount_matrix * +ak8975_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + return &((struct ak8975_data *)iio_priv(indio_dev))->orientation; +} + +static const struct iio_chan_spec_ext_info ak8975_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, ak8975_get_mount_matrix), + { }, +}; + #define AK8975_CHANNEL(axis, index) \ { \ .type = IIO_MAGN, \ @@ -722,12 +748,23 @@ static int ak8975_read_raw(struct iio_dev *indio_dev, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_SCALE), \ .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU \ + }, \ + .ext_info = ak8975_ext_info, \ } static const struct iio_chan_spec ak8975_channels[] = { AK8975_CHANNEL(X, 0), AK8975_CHANNEL(Y, 1), AK8975_CHANNEL(Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), }; +static const unsigned long ak8975_scan_masks[] = { 0x7, 0 }; + static const struct iio_info ak8975_info = { .read_raw = &ak8975_read_raw, .driver_module = THIS_MODULE, @@ -756,6 +793,56 @@ static const char *ak8975_match_acpi_device(struct device *dev, return dev_name(dev); } +static void ak8975_fill_buffer(struct iio_dev *indio_dev) +{ + struct ak8975_data *data = iio_priv(indio_dev); + const struct i2c_client *client = data->client; + const struct ak_def *def = data->def; + int ret; + s16 buff[8]; /* 3 x 16 bits axis values + 1 aligned 64 bits timestamp */ + + mutex_lock(&data->lock); + + ret = ak8975_start_read_axis(data, client); + if (ret) + goto unlock; + + /* + * For each axis, read the flux value from the appropriate register + * (the register is specified in the iio device attributes). + */ + ret = i2c_smbus_read_i2c_block_data_or_emulated(client, + def->data_regs[0], + 3 * sizeof(buff[0]), + (u8 *)buff); + if (ret < 0) + goto unlock; + + mutex_unlock(&data->lock); + + /* Clamp to valid range. */ + buff[0] = clamp_t(s16, le16_to_cpu(buff[0]), -def->range, def->range); + buff[1] = clamp_t(s16, le16_to_cpu(buff[1]), -def->range, def->range); + buff[2] = clamp_t(s16, le16_to_cpu(buff[2]), -def->range, def->range); + + iio_push_to_buffers_with_timestamp(indio_dev, buff, iio_get_time_ns()); + return; + +unlock: + mutex_unlock(&data->lock); + dev_err(&client->dev, "Error in reading axes block\n"); +} + +static irqreturn_t ak8975_handle_trigger(int irq, void *p) +{ + const struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + + ak8975_fill_buffer(indio_dev); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + static int ak8975_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -765,10 +852,12 @@ static int ak8975_probe(struct i2c_client *client, int err; const char *name = NULL; enum asahi_compass_chipset chipset; + const struct ak8975_platform_data *pdata = + dev_get_platdata(&client->dev); /* Grab and set up the supplied GPIO. */ - if (client->dev.platform_data) - eoc_gpio = *(int *)(client->dev.platform_data); + if (pdata) + eoc_gpio = pdata->eoc_gpio; else if (client->dev.of_node) eoc_gpio = of_get_gpio(client->dev.of_node, 0); else @@ -802,6 +891,15 @@ static int ak8975_probe(struct i2c_client *client, data->eoc_gpio = eoc_gpio; data->eoc_irq = 0; + if (!pdata) { + err = of_iio_read_mount_matrix(&client->dev, + "mount-matrix", + &data->orientation); + if (err) + return err; + } else + data->orientation = pdata->orientation; + /* id will be NULL when enumerated via ACPI */ if (id) { chipset = (enum asahi_compass_chipset)(id->driver_data); @@ -810,8 +908,7 @@ static int ak8975_probe(struct i2c_client *client, name = ak8975_match_acpi_device(&client->dev, &chipset); if (!name) return -ENODEV; - } - else + } else return -ENOSYS; if (chipset >= AK_MAX_TYPE) { @@ -845,15 +942,27 @@ static int ak8975_probe(struct i2c_client *client, indio_dev->channels = ak8975_channels; indio_dev->num_channels = ARRAY_SIZE(ak8975_channels); indio_dev->info = &ak8975_info; + indio_dev->available_scan_masks = ak8975_scan_masks; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->name = name; - err = iio_device_register(indio_dev); - if (err) + err = iio_triggered_buffer_setup(indio_dev, NULL, ak8975_handle_trigger, + NULL); + if (err) { + dev_err(&client->dev, "triggered buffer setup failed\n"); goto power_off; + } + + err = iio_device_register(indio_dev); + if (err) { + dev_err(&client->dev, "device register failed\n"); + goto cleanup_buffer; + } return 0; +cleanup_buffer: + iio_triggered_buffer_cleanup(indio_dev); power_off: ak8975_power_off(client); return err; @@ -864,6 +973,7 @@ static int ak8975_remove(struct i2c_client *client) struct iio_dev *indio_dev = i2c_get_clientdata(client); iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); ak8975_power_off(client); return 0; diff --git a/drivers/iio/magnetometer/bmc150_magn.c b/drivers/iio/magnetometer/bmc150_magn.c index 0e9da189dc4c..d104fb8d9379 100644 --- a/drivers/iio/magnetometer/bmc150_magn.c +++ b/drivers/iio/magnetometer/bmc150_magn.c @@ -34,6 +34,8 @@ #include <linux/iio/triggered_buffer.h> #include <linux/regmap.h> +#include "bmc150_magn.h" + #define BMC150_MAGN_DRV_NAME "bmc150_magn" #define BMC150_MAGN_IRQ_NAME "bmc150_magn_event" @@ -134,7 +136,7 @@ struct bmc150_magn_trim_regs { } __packed; struct bmc150_magn_data { - struct i2c_client *client; + struct device *dev; /* * 1. Protect this structure. * 2. Serialize sequences that power on/off the device and access HW. @@ -146,6 +148,7 @@ struct bmc150_magn_data { struct iio_trigger *dready_trig; bool dready_trigger_on; int max_odr; + int irq; }; static const struct { @@ -215,7 +218,7 @@ static bool bmc150_magn_is_volatile_reg(struct device *dev, unsigned int reg) } } -static const struct regmap_config bmc150_magn_regmap_config = { +const struct regmap_config bmc150_magn_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -225,6 +228,7 @@ static const struct regmap_config bmc150_magn_regmap_config = { .writeable_reg = bmc150_magn_is_writeable_reg, .volatile_reg = bmc150_magn_is_volatile_reg, }; +EXPORT_SYMBOL(bmc150_magn_regmap_config); static int bmc150_magn_set_power_mode(struct bmc150_magn_data *data, enum bmc150_magn_power_modes mode, @@ -263,17 +267,17 @@ static int bmc150_magn_set_power_state(struct bmc150_magn_data *data, bool on) int ret; if (on) { - ret = pm_runtime_get_sync(&data->client->dev); + ret = pm_runtime_get_sync(data->dev); } else { - pm_runtime_mark_last_busy(&data->client->dev); - ret = pm_runtime_put_autosuspend(&data->client->dev); + pm_runtime_mark_last_busy(data->dev); + ret = pm_runtime_put_autosuspend(data->dev); } if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "failed to change power state to %d\n", on); if (on) - pm_runtime_put_noidle(&data->client->dev); + pm_runtime_put_noidle(data->dev); return ret; } @@ -350,7 +354,7 @@ static int bmc150_magn_set_max_odr(struct bmc150_magn_data *data, int rep_xy, /* the maximum selectable read-out frequency from datasheet */ max_odr = 1000000 / (145 * rep_xy + 500 * rep_z + 980); if (odr > max_odr) { - dev_err(&data->client->dev, + dev_err(data->dev, "Can't set oversampling with sampling freq %d\n", odr); return -EINVAL; @@ -684,27 +688,27 @@ static int bmc150_magn_init(struct bmc150_magn_data *data) ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, false); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Failed to bring up device from suspend mode\n"); return ret; } ret = regmap_read(data->regmap, BMC150_MAGN_REG_CHIP_ID, &chip_id); if (ret < 0) { - dev_err(&data->client->dev, "Failed reading chip id\n"); + dev_err(data->dev, "Failed reading chip id\n"); goto err_poweroff; } if (chip_id != BMC150_MAGN_CHIP_ID_VAL) { - dev_err(&data->client->dev, "Invalid chip id 0x%x\n", chip_id); + dev_err(data->dev, "Invalid chip id 0x%x\n", chip_id); ret = -ENODEV; goto err_poweroff; } - dev_dbg(&data->client->dev, "Chip id %x\n", chip_id); + dev_dbg(data->dev, "Chip id %x\n", chip_id); preset = bmc150_magn_presets_table[BMC150_MAGN_DEFAULT_PRESET]; ret = bmc150_magn_set_odr(data, preset.odr); if (ret < 0) { - dev_err(&data->client->dev, "Failed to set ODR to %d\n", + dev_err(data->dev, "Failed to set ODR to %d\n", preset.odr); goto err_poweroff; } @@ -712,7 +716,7 @@ static int bmc150_magn_init(struct bmc150_magn_data *data) ret = regmap_write(data->regmap, BMC150_MAGN_REG_REP_XY, BMC150_MAGN_REPXY_TO_REGVAL(preset.rep_xy)); if (ret < 0) { - dev_err(&data->client->dev, "Failed to set REP XY to %d\n", + dev_err(data->dev, "Failed to set REP XY to %d\n", preset.rep_xy); goto err_poweroff; } @@ -720,7 +724,7 @@ static int bmc150_magn_init(struct bmc150_magn_data *data) ret = regmap_write(data->regmap, BMC150_MAGN_REG_REP_Z, BMC150_MAGN_REPZ_TO_REGVAL(preset.rep_z)); if (ret < 0) { - dev_err(&data->client->dev, "Failed to set REP Z to %d\n", + dev_err(data->dev, "Failed to set REP Z to %d\n", preset.rep_z); goto err_poweroff; } @@ -733,7 +737,7 @@ static int bmc150_magn_init(struct bmc150_magn_data *data) ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL, true); if (ret < 0) { - dev_err(&data->client->dev, "Failed to power on device\n"); + dev_err(data->dev, "Failed to power on device\n"); goto err_poweroff; } @@ -842,41 +846,33 @@ static const char *bmc150_magn_match_acpi_device(struct device *dev) return dev_name(dev); } -static int bmc150_magn_probe(struct i2c_client *client, - const struct i2c_device_id *id) +int bmc150_magn_probe(struct device *dev, struct regmap *regmap, + int irq, const char *name) { struct bmc150_magn_data *data; struct iio_dev *indio_dev; - const char *name = NULL; int ret; - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); - i2c_set_clientdata(client, indio_dev); - data->client = client; + dev_set_drvdata(dev, indio_dev); + data->regmap = regmap; + data->irq = irq; + data->dev = dev; - if (id) - name = id->name; - else if (ACPI_HANDLE(&client->dev)) - name = bmc150_magn_match_acpi_device(&client->dev); - else - return -ENOSYS; + if (!name && ACPI_HANDLE(dev)) + name = bmc150_magn_match_acpi_device(dev); mutex_init(&data->mutex); - data->regmap = devm_regmap_init_i2c(client, &bmc150_magn_regmap_config); - if (IS_ERR(data->regmap)) { - dev_err(&client->dev, "Failed to allocate register map\n"); - return PTR_ERR(data->regmap); - } ret = bmc150_magn_init(data); if (ret < 0) return ret; - indio_dev->dev.parent = &client->dev; + indio_dev->dev.parent = dev; indio_dev->channels = bmc150_magn_channels; indio_dev->num_channels = ARRAY_SIZE(bmc150_magn_channels); indio_dev->available_scan_masks = bmc150_magn_scan_masks; @@ -884,35 +880,34 @@ static int bmc150_magn_probe(struct i2c_client *client, indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &bmc150_magn_info; - if (client->irq > 0) { - data->dready_trig = devm_iio_trigger_alloc(&client->dev, + if (irq > 0) { + data->dready_trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name, indio_dev->id); if (!data->dready_trig) { ret = -ENOMEM; - dev_err(&client->dev, "iio trigger alloc failed\n"); + dev_err(dev, "iio trigger alloc failed\n"); goto err_poweroff; } - data->dready_trig->dev.parent = &client->dev; + data->dready_trig->dev.parent = dev; data->dready_trig->ops = &bmc150_magn_trigger_ops; iio_trigger_set_drvdata(data->dready_trig, indio_dev); ret = iio_trigger_register(data->dready_trig); if (ret) { - dev_err(&client->dev, "iio trigger register failed\n"); + dev_err(dev, "iio trigger register failed\n"); goto err_poweroff; } - ret = request_threaded_irq(client->irq, + ret = request_threaded_irq(irq, iio_trigger_generic_data_rdy_poll, NULL, IRQF_TRIGGER_RISING | IRQF_ONESHOT, BMC150_MAGN_IRQ_NAME, data->dready_trig); if (ret < 0) { - dev_err(&client->dev, "request irq %d failed\n", - client->irq); + dev_err(dev, "request irq %d failed\n", irq); goto err_trigger_unregister; } } @@ -922,34 +917,33 @@ static int bmc150_magn_probe(struct i2c_client *client, bmc150_magn_trigger_handler, &bmc150_magn_buffer_setup_ops); if (ret < 0) { - dev_err(&client->dev, - "iio triggered buffer setup failed\n"); + dev_err(dev, "iio triggered buffer setup failed\n"); goto err_free_irq; } - ret = pm_runtime_set_active(&client->dev); + ret = pm_runtime_set_active(dev); if (ret) goto err_buffer_cleanup; - pm_runtime_enable(&client->dev); - pm_runtime_set_autosuspend_delay(&client->dev, + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, BMC150_MAGN_AUTO_SUSPEND_DELAY_MS); - pm_runtime_use_autosuspend(&client->dev); + pm_runtime_use_autosuspend(dev); ret = iio_device_register(indio_dev); if (ret < 0) { - dev_err(&client->dev, "unable to register iio device\n"); + dev_err(dev, "unable to register iio device\n"); goto err_buffer_cleanup; } - dev_dbg(&indio_dev->dev, "Registered device %s\n", name); + dev_dbg(dev, "Registered device %s\n", name); return 0; err_buffer_cleanup: iio_triggered_buffer_cleanup(indio_dev); err_free_irq: - if (client->irq > 0) - free_irq(client->irq, data->dready_trig); + if (irq > 0) + free_irq(irq, data->dready_trig); err_trigger_unregister: if (data->dready_trig) iio_trigger_unregister(data->dready_trig); @@ -957,22 +951,23 @@ err_poweroff: bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true); return ret; } +EXPORT_SYMBOL(bmc150_magn_probe); -static int bmc150_magn_remove(struct i2c_client *client) +int bmc150_magn_remove(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); iio_device_unregister(indio_dev); - pm_runtime_disable(&client->dev); - pm_runtime_set_suspended(&client->dev); - pm_runtime_put_noidle(&client->dev); + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); iio_triggered_buffer_cleanup(indio_dev); - if (client->irq > 0) - free_irq(data->client->irq, data->dready_trig); + if (data->irq > 0) + free_irq(data->irq, data->dready_trig); if (data->dready_trig) iio_trigger_unregister(data->dready_trig); @@ -983,11 +978,12 @@ static int bmc150_magn_remove(struct i2c_client *client) return 0; } +EXPORT_SYMBOL(bmc150_magn_remove); #ifdef CONFIG_PM static int bmc150_magn_runtime_suspend(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); int ret; @@ -996,7 +992,7 @@ static int bmc150_magn_runtime_suspend(struct device *dev) true); mutex_unlock(&data->mutex); if (ret < 0) { - dev_err(&data->client->dev, "powering off device failed\n"); + dev_err(dev, "powering off device failed\n"); return ret; } return 0; @@ -1007,7 +1003,7 @@ static int bmc150_magn_runtime_suspend(struct device *dev) */ static int bmc150_magn_runtime_resume(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); return bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL, @@ -1018,7 +1014,7 @@ static int bmc150_magn_runtime_resume(struct device *dev) #ifdef CONFIG_PM_SLEEP static int bmc150_magn_suspend(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); int ret; @@ -1032,7 +1028,7 @@ static int bmc150_magn_suspend(struct device *dev) static int bmc150_magn_resume(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); int ret; @@ -1045,38 +1041,13 @@ static int bmc150_magn_resume(struct device *dev) } #endif -static const struct dev_pm_ops bmc150_magn_pm_ops = { +const struct dev_pm_ops bmc150_magn_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(bmc150_magn_suspend, bmc150_magn_resume) SET_RUNTIME_PM_OPS(bmc150_magn_runtime_suspend, bmc150_magn_runtime_resume, NULL) }; - -static const struct acpi_device_id bmc150_magn_acpi_match[] = { - {"BMC150B", 0}, - {"BMC156B", 0}, - {}, -}; -MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); - -static const struct i2c_device_id bmc150_magn_id[] = { - {"bmc150_magn", 0}, - {"bmc156_magn", 0}, - {}, -}; -MODULE_DEVICE_TABLE(i2c, bmc150_magn_id); - -static struct i2c_driver bmc150_magn_driver = { - .driver = { - .name = BMC150_MAGN_DRV_NAME, - .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), - .pm = &bmc150_magn_pm_ops, - }, - .probe = bmc150_magn_probe, - .remove = bmc150_magn_remove, - .id_table = bmc150_magn_id, -}; -module_i2c_driver(bmc150_magn_driver); +EXPORT_SYMBOL(bmc150_magn_pm_ops); MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>"); MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("BMC150 magnetometer driver"); +MODULE_DESCRIPTION("BMC150 magnetometer core driver"); diff --git a/drivers/iio/magnetometer/bmc150_magn.h b/drivers/iio/magnetometer/bmc150_magn.h new file mode 100644 index 000000000000..9a8e26812ca8 --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn.h @@ -0,0 +1,11 @@ +#ifndef _BMC150_MAGN_H_ +#define _BMC150_MAGN_H_ + +extern const struct regmap_config bmc150_magn_regmap_config; +extern const struct dev_pm_ops bmc150_magn_pm_ops; + +int bmc150_magn_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name); +int bmc150_magn_remove(struct device *dev); + +#endif /* _BMC150_MAGN_H_ */ diff --git a/drivers/iio/magnetometer/bmc150_magn_i2c.c b/drivers/iio/magnetometer/bmc150_magn_i2c.c new file mode 100644 index 000000000000..eddc7f0d0096 --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn_i2c.c @@ -0,0 +1,77 @@ +/* + * 3-axis magnetometer driver supporting following I2C Bosch-Sensortec chips: + * - BMC150 + * - BMC156 + * + * Copyright (c) 2016, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ +#include <linux/device.h> +#include <linux/mod_devicetable.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/regmap.h> + +#include "bmc150_magn.h" + +static int bmc150_magn_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const char *name = NULL; + + regmap = devm_regmap_init_i2c(client, &bmc150_magn_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to initialize i2c regmap\n"); + return PTR_ERR(regmap); + } + + if (id) + name = id->name; + + return bmc150_magn_probe(&client->dev, regmap, client->irq, name); +} + +static int bmc150_magn_i2c_remove(struct i2c_client *client) +{ + return bmc150_magn_remove(&client->dev); +} + +static const struct acpi_device_id bmc150_magn_acpi_match[] = { + {"BMC150B", 0}, + {"BMC156B", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); + +static const struct i2c_device_id bmc150_magn_i2c_id[] = { + {"bmc150_magn", 0}, + {"bmc156_magn", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, bmc150_magn_i2c_id); + +static struct i2c_driver bmc150_magn_driver = { + .driver = { + .name = "bmc150_magn_i2c", + .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), + .pm = &bmc150_magn_pm_ops, + }, + .probe = bmc150_magn_i2c_probe, + .remove = bmc150_magn_i2c_remove, + .id_table = bmc150_magn_i2c_id, +}; +module_i2c_driver(bmc150_magn_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("BMC150 I2C magnetometer driver"); diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c new file mode 100644 index 000000000000..c4c738a07695 --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn_spi.c @@ -0,0 +1,68 @@ +/* + * 3-axis magnetometer driver support following SPI Bosch-Sensortec chips: + * - BMC150 + * - BMC156 + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/spi/spi.h> +#include <linux/acpi.h> +#include <linux/regmap.h> + +#include "bmc150_magn.h" + +static int bmc150_magn_spi_probe(struct spi_device *spi) +{ + struct regmap *regmap; + const struct spi_device_id *id = spi_get_device_id(spi); + + regmap = devm_regmap_init_spi(spi, &bmc150_magn_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Failed to register spi regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + return bmc150_magn_probe(&spi->dev, regmap, spi->irq, id->name); +} + +static int bmc150_magn_spi_remove(struct spi_device *spi) +{ + bmc150_magn_remove(&spi->dev); + + return 0; +} + +static const struct spi_device_id bmc150_magn_spi_id[] = { + {"bmc150_magn", 0}, + {"bmc156_magn", 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, bmc150_magn_spi_id); + +static const struct acpi_device_id bmc150_magn_acpi_match[] = { + {"BMC150B", 0}, + {"BMC156B", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); + +static struct spi_driver bmc150_magn_spi_driver = { + .probe = bmc150_magn_spi_probe, + .remove = bmc150_magn_spi_remove, + .id_table = bmc150_magn_spi_id, + .driver = { + .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), + .name = "bmc150_magn_spi", + }, +}; +module_spi_driver(bmc150_magn_spi_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_DESCRIPTION("BMC150 magnetometer SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 501f858df413..62036d2a9956 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -484,6 +484,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { .mask_int1 = ST_MAGN_3_DRDY_INT_MASK, .addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR, .mask_ihl = ST_MAGN_3_IHL_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_MAGN_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig index 7ea069bbca2d..6acb23810bb4 100644 --- a/drivers/iio/potentiometer/Kconfig +++ b/drivers/iio/potentiometer/Kconfig @@ -5,6 +5,16 @@ menu "Digital potentiometers" +config DS1803 + tristate "Maxim Integrated DS1803 Digital Potentiometer driver" + depends on I2C + help + Say yes here to build support for the Maxim Integrated DS1803 + digital potentiomenter chip. + + To compile this driver as a module, choose M here: the + module will be called ds1803. + config MCP4131 tristate "Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer driver" depends on SPI diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile index 91a80f8db24d..6007faa2fb02 100644 --- a/drivers/iio/potentiometer/Makefile +++ b/drivers/iio/potentiometer/Makefile @@ -3,6 +3,7 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_DS1803) += ds1803.o obj-$(CONFIG_MCP4131) += mcp4131.o obj-$(CONFIG_MCP4531) += mcp4531.o obj-$(CONFIG_TPL0102) += tpl0102.o diff --git a/drivers/iio/potentiometer/ds1803.c b/drivers/iio/potentiometer/ds1803.c new file mode 100644 index 000000000000..fb9e2a337dc2 --- /dev/null +++ b/drivers/iio/potentiometer/ds1803.c @@ -0,0 +1,173 @@ +/* + * Maxim Integrated DS1803 digital potentiometer driver + * Copyright (c) 2016 Slawomir Stepien + * + * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1803.pdf + * + * DEVID #Wipers #Positions Resistor Opts (kOhm) i2c address + * ds1803 2 256 10, 50, 100 0101xxx + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/export.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/of.h> + +#define DS1803_MAX_POS 255 +#define DS1803_WRITE(chan) (0xa8 | ((chan) + 1)) + +enum ds1803_type { + DS1803_010, + DS1803_050, + DS1803_100, +}; + +struct ds1803_cfg { + int kohms; +}; + +static const struct ds1803_cfg ds1803_cfg[] = { + [DS1803_010] = { .kohms = 10, }, + [DS1803_050] = { .kohms = 50, }, + [DS1803_100] = { .kohms = 100, }, +}; + +struct ds1803_data { + struct i2c_client *client; + const struct ds1803_cfg *cfg; +}; + +#define DS1803_CHANNEL(ch) { \ + .type = IIO_RESISTANCE, \ + .indexed = 1, \ + .output = 1, \ + .channel = (ch), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec ds1803_channels[] = { + DS1803_CHANNEL(0), + DS1803_CHANNEL(1), +}; + +static int ds1803_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct ds1803_data *data = iio_priv(indio_dev); + int pot = chan->channel; + int ret; + u8 result[indio_dev->num_channels]; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = i2c_master_recv(data->client, result, + indio_dev->num_channels); + if (ret < 0) + return ret; + + *val = result[pot]; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 1000 * data->cfg->kohms; + *val2 = DS1803_MAX_POS; + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int ds1803_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ds1803_data *data = iio_priv(indio_dev); + int pot = chan->channel; + + if (val2 != 0) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (val > DS1803_MAX_POS || val < 0) + return -EINVAL; + break; + default: + return -EINVAL; + } + + return i2c_smbus_write_byte_data(data->client, DS1803_WRITE(pot), val); +} + +static const struct iio_info ds1803_info = { + .read_raw = ds1803_read_raw, + .write_raw = ds1803_write_raw, + .driver_module = THIS_MODULE, +}; + +static int ds1803_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ds1803_data *data; + struct iio_dev *indio_dev; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + i2c_set_clientdata(client, indio_dev); + + data = iio_priv(indio_dev); + data->client = client; + data->cfg = &ds1803_cfg[id->driver_data]; + + indio_dev->dev.parent = dev; + indio_dev->info = &ds1803_info; + indio_dev->channels = ds1803_channels; + indio_dev->num_channels = ARRAY_SIZE(ds1803_channels); + indio_dev->name = client->name; + + return devm_iio_device_register(dev, indio_dev); +} + +#if defined(CONFIG_OF) +static const struct of_device_id ds1803_dt_ids[] = { + { .compatible = "maxim,ds1803-010", .data = &ds1803_cfg[DS1803_010] }, + { .compatible = "maxim,ds1803-050", .data = &ds1803_cfg[DS1803_050] }, + { .compatible = "maxim,ds1803-100", .data = &ds1803_cfg[DS1803_100] }, + {} +}; +MODULE_DEVICE_TABLE(of, ds1803_dt_ids); +#endif /* CONFIG_OF */ + +static const struct i2c_device_id ds1803_id[] = { + { "ds1803-010", DS1803_010 }, + { "ds1803-050", DS1803_050 }, + { "ds1803-100", DS1803_100 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ds1803_id); + +static struct i2c_driver ds1803_driver = { + .driver = { + .name = "ds1803", + .of_match_table = of_match_ptr(ds1803_dt_ids), + }, + .probe = ds1803_probe, + .id_table = ds1803_id, +}; + +module_i2c_driver(ds1803_driver); + +MODULE_AUTHOR("Slawomir Stepien <sst@poczta.fm>"); +MODULE_DESCRIPTION("DS1803 digital potentiometer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 8de0192adea6..cda9f128f3a4 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -6,12 +6,13 @@ menu "Pressure sensors" config BMP280 - tristate "Bosch Sensortec BMP280 pressure sensor driver" + tristate "Bosch Sensortec BMP180 and BMP280 pressure sensor driver" depends on I2C + depends on !(BMP085_I2C=y || BMP085_I2C=m) select REGMAP_I2C help - Say yes here to build support for Bosch Sensortec BMP280 - pressure and temperature sensor. + Say yes here to build support for Bosch Sensortec BMP180 and BMP280 + pressure and temperature sensors. To compile this driver as a module, choose M here: the module will be called bmp280. @@ -30,6 +31,17 @@ config HID_SENSOR_PRESS To compile this driver as a module, choose M here: the module will be called hid-sensor-press. +config HP03 + tristate "Hope RF HP03 temperature and pressure sensor driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for Hope RF HP03 pressure and + temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called hp03. + config MPL115 tristate diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 6e60863c1086..17d6e7afa1ff 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -5,6 +5,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMP280) += bmp280.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o +obj-$(CONFIG_HP03) += hp03.o obj-$(CONFIG_MPL115) += mpl115.o obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c index a2602d8dd6d5..2f1498e12bb2 100644 --- a/drivers/iio/pressure/bmp280.c +++ b/drivers/iio/pressure/bmp280.c @@ -1,12 +1,15 @@ /* * Copyright (c) 2014 Intel Corporation * - * Driver for Bosch Sensortec BMP280 digital pressure sensor. + * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * + * Datasheet: + * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf + * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf */ #define pr_fmt(fmt) "bmp280: " fmt @@ -15,9 +18,11 @@ #include <linux/i2c.h> #include <linux/acpi.h> #include <linux/regmap.h> +#include <linux/delay.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> +/* BMP280 specific registers */ #define BMP280_REG_TEMP_XLSB 0xFC #define BMP280_REG_TEMP_LSB 0xFB #define BMP280_REG_TEMP_MSB 0xFA @@ -26,10 +31,7 @@ #define BMP280_REG_PRESS_MSB 0xF7 #define BMP280_REG_CONFIG 0xF5 -#define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_STATUS 0xF3 -#define BMP280_REG_RESET 0xE0 -#define BMP280_REG_ID 0xD0 #define BMP280_REG_COMP_TEMP_START 0x88 #define BMP280_COMP_TEMP_REG_COUNT 6 @@ -46,25 +48,49 @@ #define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5)) #define BMP280_OSRS_TEMP_SKIP 0 -#define BMP280_OSRS_TEMP_1X BIT(5) -#define BMP280_OSRS_TEMP_2X BIT(6) -#define BMP280_OSRS_TEMP_4X (BIT(6) | BIT(5)) -#define BMP280_OSRS_TEMP_8X BIT(7) -#define BMP280_OSRS_TEMP_16X (BIT(7) | BIT(5)) +#define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5) +#define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1) +#define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2) +#define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3) +#define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4) +#define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5) #define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2)) #define BMP280_OSRS_PRESS_SKIP 0 -#define BMP280_OSRS_PRESS_1X BIT(2) -#define BMP280_OSRS_PRESS_2X BIT(3) -#define BMP280_OSRS_PRESS_4X (BIT(3) | BIT(2)) -#define BMP280_OSRS_PRESS_8X BIT(4) -#define BMP280_OSRS_PRESS_16X (BIT(4) | BIT(2)) +#define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2) +#define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1) +#define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2) +#define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3) +#define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4) +#define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5) #define BMP280_MODE_MASK (BIT(1) | BIT(0)) #define BMP280_MODE_SLEEP 0 #define BMP280_MODE_FORCED BIT(0) #define BMP280_MODE_NORMAL (BIT(1) | BIT(0)) +/* BMP180 specific registers */ +#define BMP180_REG_OUT_XLSB 0xF8 +#define BMP180_REG_OUT_LSB 0xF7 +#define BMP180_REG_OUT_MSB 0xF6 + +#define BMP180_REG_CALIB_START 0xAA +#define BMP180_REG_CALIB_COUNT 22 + +#define BMP180_MEAS_SCO BIT(5) +#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO) +#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO) +#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0) +#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1) +#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2) +#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3) + +/* BMP180 and BMP280 common registers */ +#define BMP280_REG_CTRL_MEAS 0xF4 +#define BMP280_REG_RESET 0xE0 +#define BMP280_REG_ID 0xD0 + +#define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 #define BMP280_SOFT_RESET_VAL 0xB6 @@ -72,6 +98,11 @@ struct bmp280_data { struct i2c_client *client; struct mutex lock; struct regmap *regmap; + const struct bmp280_chip_info *chip_info; + + /* log of base 2 of oversampling rate */ + u8 oversampling_press; + u8 oversampling_temp; /* * Carryover value from temperature conversion, used in pressure @@ -80,9 +111,23 @@ struct bmp280_data { s32 t_fine; }; +struct bmp280_chip_info { + const struct regmap_config *regmap_config; + + const int *oversampling_temp_avail; + int num_oversampling_temp_avail; + + const int *oversampling_press_avail; + int num_oversampling_press_avail; + + int (*chip_config)(struct bmp280_data *); + int (*read_temp)(struct bmp280_data *, int *); + int (*read_press)(struct bmp280_data *, int *, int *); +}; + /* * These enums are used for indexing into the array of compensation - * parameters. + * parameters for BMP280. */ enum { T1, T2, T3 }; enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 }; @@ -90,11 +135,13 @@ enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 }; static const struct iio_chan_spec bmp280_channels[] = { { .type = IIO_PRESSURE, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), }, { .type = IIO_TEMP, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), }, }; @@ -290,10 +337,25 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_PRESSURE: - ret = bmp280_read_press(data, val, val2); + ret = data->chip_info->read_press(data, val, val2); break; case IIO_TEMP: - ret = bmp280_read_temp(data, val); + ret = data->chip_info->read_temp(data, val); + break; + default: + ret = -EINVAL; + break; + } + break; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + switch (chan->type) { + case IIO_PRESSURE: + *val = 1 << data->oversampling_press; + ret = IIO_VAL_INT; + break; + case IIO_TEMP: + *val = 1 << data->oversampling_temp; + ret = IIO_VAL_INT; break; default: ret = -EINVAL; @@ -310,22 +372,135 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, return ret; } +static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data, + int val) +{ + int i; + const int *avail = data->chip_info->oversampling_temp_avail; + const int n = data->chip_info->num_oversampling_temp_avail; + + for (i = 0; i < n; i++) { + if (avail[i] == val) { + data->oversampling_temp = ilog2(val); + + return data->chip_info->chip_config(data); + } + } + return -EINVAL; +} + +static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data, + int val) +{ + int i; + const int *avail = data->chip_info->oversampling_press_avail; + const int n = data->chip_info->num_oversampling_press_avail; + + for (i = 0; i < n; i++) { + if (avail[i] == val) { + data->oversampling_press = ilog2(val); + + return data->chip_info->chip_config(data); + } + } + return -EINVAL; +} + +static int bmp280_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int ret = 0; + struct bmp280_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + mutex_lock(&data->lock); + switch (chan->type) { + case IIO_PRESSURE: + ret = bmp280_write_oversampling_ratio_press(data, val); + break; + case IIO_TEMP: + ret = bmp280_write_oversampling_ratio_temp(data, val); + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + break; + default: + return -EINVAL; + } + + return ret; +} + +static ssize_t bmp280_show_avail(char *buf, const int *vals, const int n) +{ + size_t len = 0; + int i; + + for (i = 0; i < n; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", vals[i]); + + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t bmp280_show_temp_oversampling_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev)); + + return bmp280_show_avail(buf, data->chip_info->oversampling_temp_avail, + data->chip_info->num_oversampling_temp_avail); +} + +static ssize_t bmp280_show_press_oversampling_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev)); + + return bmp280_show_avail(buf, data->chip_info->oversampling_press_avail, + data->chip_info->num_oversampling_press_avail); +} + +static IIO_DEVICE_ATTR(in_temp_oversampling_ratio_available, + S_IRUGO, bmp280_show_temp_oversampling_avail, NULL, 0); + +static IIO_DEVICE_ATTR(in_pressure_oversampling_ratio_available, + S_IRUGO, bmp280_show_press_oversampling_avail, NULL, 0); + +static struct attribute *bmp280_attributes[] = { + &iio_dev_attr_in_temp_oversampling_ratio_available.dev_attr.attr, + &iio_dev_attr_in_pressure_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bmp280_attrs_group = { + .attrs = bmp280_attributes, +}; + static const struct iio_info bmp280_info = { .driver_module = THIS_MODULE, .read_raw = &bmp280_read_raw, + .write_raw = &bmp280_write_raw, + .attrs = &bmp280_attrs_group, }; -static int bmp280_chip_init(struct bmp280_data *data) +static int bmp280_chip_config(struct bmp280_data *data) { int ret; + u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) | + BMP280_OSRS_PRESS_X(data->oversampling_press + 1); ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS, BMP280_OSRS_TEMP_MASK | BMP280_OSRS_PRESS_MASK | BMP280_MODE_MASK, - BMP280_OSRS_TEMP_2X | - BMP280_OSRS_PRESS_16X | - BMP280_MODE_NORMAL); + osrs | BMP280_MODE_NORMAL); if (ret < 0) { dev_err(&data->client->dev, "failed to write ctrl_meas register\n"); @@ -344,6 +519,317 @@ static int bmp280_chip_init(struct bmp280_data *data) return ret; } +static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; + +static const struct bmp280_chip_info bmp280_chip_info = { + .regmap_config = &bmp280_regmap_config, + + .oversampling_temp_avail = bmp280_oversampling_avail, + .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .oversampling_press_avail = bmp280_oversampling_avail, + .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .chip_config = bmp280_chip_config, + .read_temp = bmp280_read_temp, + .read_press = bmp280_read_press, +}; + +static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP280_REG_CTRL_MEAS: + case BMP280_REG_RESET: + return true; + default: + return false; + }; +} + +static bool bmp180_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP180_REG_OUT_XLSB: + case BMP180_REG_OUT_LSB: + case BMP180_REG_OUT_MSB: + case BMP280_REG_CTRL_MEAS: + return true; + default: + return false; + } +} + +static const struct regmap_config bmp180_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP180_REG_OUT_XLSB, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp180_is_writeable_reg, + .volatile_reg = bmp180_is_volatile_reg, +}; + +static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) +{ + int ret; + const int conversion_time_max[] = { 4500, 7500, 13500, 25500 }; + unsigned int delay_us; + unsigned int ctrl; + + ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas); + if (ret) + return ret; + + if (ctrl_meas == BMP180_MEAS_TEMP) + delay_us = 4500; + else + delay_us = conversion_time_max[data->oversampling_press]; + + usleep_range(delay_us, delay_us + 1000); + + ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl); + if (ret) + return ret; + + /* The value of this bit reset to "0" after conversion is complete */ + if (ctrl & BMP180_MEAS_SCO) + return -EIO; + + return 0; +} + +static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) +{ + int ret; + __be16 tmp = 0; + + ret = bmp180_measure(data, BMP180_MEAS_TEMP); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 2); + if (ret) + return ret; + + *val = be16_to_cpu(tmp); + + return 0; +} + +/* + * These enums are used for indexing into the array of calibration + * coefficients for BMP180. + */ +enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD }; + +struct bmp180_calib { + s16 AC1; + s16 AC2; + s16 AC3; + u16 AC4; + u16 AC5; + u16 AC6; + s16 B1; + s16 B2; + s16 MB; + s16 MC; + s16 MD; +}; + +static int bmp180_read_calib(struct bmp280_data *data, + struct bmp180_calib *calib) +{ + int ret; + int i; + __be16 buf[BMP180_REG_CALIB_COUNT / 2]; + + ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf, + sizeof(buf)); + + if (ret < 0) + return ret; + + /* None of the words has the value 0 or 0xFFFF */ + for (i = 0; i < ARRAY_SIZE(buf); i++) { + if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff)) + return -EIO; + } + + calib->AC1 = be16_to_cpu(buf[AC1]); + calib->AC2 = be16_to_cpu(buf[AC2]); + calib->AC3 = be16_to_cpu(buf[AC3]); + calib->AC4 = be16_to_cpu(buf[AC4]); + calib->AC5 = be16_to_cpu(buf[AC5]); + calib->AC6 = be16_to_cpu(buf[AC6]); + calib->B1 = be16_to_cpu(buf[B1]); + calib->B2 = be16_to_cpu(buf[B2]); + calib->MB = be16_to_cpu(buf[MB]); + calib->MC = be16_to_cpu(buf[MC]); + calib->MD = be16_to_cpu(buf[MD]); + + return 0; +} + +/* + * Returns temperature in DegC, resolution is 0.1 DegC. + * t_fine carries fine temperature as global value. + * + * Taken from datasheet, Section 3.5, "Calculating pressure and temperature". + */ +static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp) +{ + int ret; + s32 x1, x2; + struct bmp180_calib calib; + + ret = bmp180_read_calib(data, &calib); + if (ret < 0) { + dev_err(&data->client->dev, + "failed to read calibration coefficients\n"); + return ret; + } + + x1 = ((adc_temp - calib.AC6) * calib.AC5) >> 15; + x2 = (calib.MC << 11) / (x1 + calib.MD); + data->t_fine = x1 + x2; + + return (data->t_fine + 8) >> 4; +} + +static int bmp180_read_temp(struct bmp280_data *data, int *val) +{ + int ret; + s32 adc_temp, comp_temp; + + ret = bmp180_read_adc_temp(data, &adc_temp); + if (ret) + return ret; + + comp_temp = bmp180_compensate_temp(data, adc_temp); + + /* + * val might be NULL if we're called by the read_press routine, + * who only cares about the carry over t_fine value. + */ + if (val) { + *val = comp_temp * 100; + return IIO_VAL_INT; + } + + return 0; +} + +static int bmp180_read_adc_press(struct bmp280_data *data, int *val) +{ + int ret; + __be32 tmp = 0; + u8 oss = data->oversampling_press; + + ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss)); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 3); + if (ret) + return ret; + + *val = (be32_to_cpu(tmp) >> 8) >> (8 - oss); + + return 0; +} + +/* + * Returns pressure in Pa, resolution is 1 Pa. + * + * Taken from datasheet, Section 3.5, "Calculating pressure and temperature". + */ +static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press) +{ + int ret; + s32 x1, x2, x3, p; + s32 b3, b6; + u32 b4, b7; + s32 oss = data->oversampling_press; + struct bmp180_calib calib; + + ret = bmp180_read_calib(data, &calib); + if (ret < 0) { + dev_err(&data->client->dev, + "failed to read calibration coefficients\n"); + return ret; + } + + b6 = data->t_fine - 4000; + x1 = (calib.B2 * (b6 * b6 >> 12)) >> 11; + x2 = calib.AC2 * b6 >> 11; + x3 = x1 + x2; + b3 = ((((s32)calib.AC1 * 4 + x3) << oss) + 2) / 4; + x1 = calib.AC3 * b6 >> 13; + x2 = (calib.B1 * ((b6 * b6) >> 12)) >> 16; + x3 = (x1 + x2 + 2) >> 2; + b4 = calib.AC4 * (u32)(x3 + 32768) >> 15; + b7 = ((u32)adc_press - b3) * (50000 >> oss); + if (b7 < 0x80000000) + p = (b7 * 2) / b4; + else + p = (b7 / b4) * 2; + + x1 = (p >> 8) * (p >> 8); + x1 = (x1 * 3038) >> 16; + x2 = (-7357 * p) >> 16; + + return p + ((x1 + x2 + 3791) >> 4); +} + +static int bmp180_read_press(struct bmp280_data *data, + int *val, int *val2) +{ + int ret; + s32 adc_press; + u32 comp_press; + + /* Read and compensate temperature so we get a reading of t_fine. */ + ret = bmp180_read_temp(data, NULL); + if (ret) + return ret; + + ret = bmp180_read_adc_press(data, &adc_press); + if (ret) + return ret; + + comp_press = bmp180_compensate_press(data, adc_press); + + *val = comp_press; + *val2 = 1000; + + return IIO_VAL_FRACTIONAL; +} + +static int bmp180_chip_config(struct bmp280_data *data) +{ + return 0; +} + +static const int bmp180_oversampling_temp_avail[] = { 1 }; +static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; + +static const struct bmp280_chip_info bmp180_chip_info = { + .regmap_config = &bmp180_regmap_config, + + .oversampling_temp_avail = bmp180_oversampling_temp_avail, + .num_oversampling_temp_avail = + ARRAY_SIZE(bmp180_oversampling_temp_avail), + + .oversampling_press_avail = bmp180_oversampling_press_avail, + .num_oversampling_press_avail = + ARRAY_SIZE(bmp180_oversampling_press_avail), + + .chip_config = bmp180_chip_config, + .read_temp = bmp180_read_temp, + .read_press = bmp180_read_press, +}; + static int bmp280_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -367,7 +853,23 @@ static int bmp280_probe(struct i2c_client *client, indio_dev->info = &bmp280_info; indio_dev->modes = INDIO_DIRECT_MODE; - data->regmap = devm_regmap_init_i2c(client, &bmp280_regmap_config); + switch (id->driver_data) { + case BMP180_CHIP_ID: + data->chip_info = &bmp180_chip_info; + data->oversampling_press = ilog2(8); + data->oversampling_temp = ilog2(1); + break; + case BMP280_CHIP_ID: + data->chip_info = &bmp280_chip_info; + data->oversampling_press = ilog2(16); + data->oversampling_temp = ilog2(2); + break; + default: + return -EINVAL; + } + + data->regmap = devm_regmap_init_i2c(client, + data->chip_info->regmap_config); if (IS_ERR(data->regmap)) { dev_err(&client->dev, "failed to allocate register map\n"); return PTR_ERR(data->regmap); @@ -376,13 +878,13 @@ static int bmp280_probe(struct i2c_client *client, ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id); if (ret < 0) return ret; - if (chip_id != BMP280_CHIP_ID) { + if (chip_id != id->driver_data) { dev_err(&client->dev, "bad chip id. expected %x got %x\n", BMP280_CHIP_ID, chip_id); return -EINVAL; } - ret = bmp280_chip_init(data); + ret = data->chip_info->chip_config(data); if (ret < 0) return ret; @@ -390,13 +892,17 @@ static int bmp280_probe(struct i2c_client *client, } static const struct acpi_device_id bmp280_acpi_match[] = { - {"BMP0280", 0}, + {"BMP0280", BMP280_CHIP_ID }, + {"BMP0180", BMP180_CHIP_ID }, + {"BMP0085", BMP180_CHIP_ID }, { }, }; MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match); static const struct i2c_device_id bmp280_id[] = { - {"bmp280", 0}, + {"bmp280", BMP280_CHIP_ID }, + {"bmp180", BMP180_CHIP_ID }, + {"bmp085", BMP180_CHIP_ID }, { }, }; MODULE_DEVICE_TABLE(i2c, bmp280_id); @@ -412,5 +918,5 @@ static struct i2c_driver bmp280_driver = { module_i2c_driver(bmp280_driver); MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>"); -MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP280 pressure and temperature sensor"); +MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c new file mode 100644 index 000000000000..ac76515d5d49 --- /dev/null +++ b/drivers/iio/pressure/hp03.c @@ -0,0 +1,312 @@ +/* + * Copyright (c) 2016 Marek Vasut <marex@denx.de> + * + * Driver for Hope RF HP03 digital temperature and pressure sensor. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "hp03: " fmt + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +/* + * The HP03 sensor occupies two fixed I2C addresses: + * 0x50 ... read-only EEPROM with calibration data + * 0x77 ... read-write ADC for pressure and temperature + */ +#define HP03_EEPROM_ADDR 0x50 +#define HP03_ADC_ADDR 0x77 + +#define HP03_EEPROM_CX_OFFSET 0x10 +#define HP03_EEPROM_AB_OFFSET 0x1e +#define HP03_EEPROM_CD_OFFSET 0x20 + +#define HP03_ADC_WRITE_REG 0xff +#define HP03_ADC_READ_REG 0xfd +#define HP03_ADC_READ_PRESSURE 0xf0 /* D1 in datasheet */ +#define HP03_ADC_READ_TEMP 0xe8 /* D2 in datasheet */ + +struct hp03_priv { + struct i2c_client *client; + struct mutex lock; + struct gpio_desc *xclr_gpio; + + struct i2c_client *eeprom_client; + struct regmap *eeprom_regmap; + + s32 pressure; /* kPa */ + s32 temp; /* Deg. C */ +}; + +static const struct iio_chan_spec hp03_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static bool hp03_is_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static bool hp03_is_volatile_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static const struct regmap_config hp03_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = HP03_EEPROM_CD_OFFSET + 1, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = hp03_is_writeable_reg, + .volatile_reg = hp03_is_volatile_reg, +}; + +static int hp03_get_temp_pressure(struct hp03_priv *priv, const u8 reg) +{ + int ret; + + ret = i2c_smbus_write_byte_data(priv->client, HP03_ADC_WRITE_REG, reg); + if (ret < 0) + return ret; + + msleep(50); /* Wait for conversion to finish */ + + return i2c_smbus_read_word_data(priv->client, HP03_ADC_READ_REG); +} + +static int hp03_update_temp_pressure(struct hp03_priv *priv) +{ + struct device *dev = &priv->client->dev; + u8 coefs[18]; + u16 cx_val[7]; + int ab_val, d1_val, d2_val, diff_val, dut, off, sens, x; + int i, ret; + + /* Sample coefficients from EEPROM */ + ret = regmap_bulk_read(priv->eeprom_regmap, HP03_EEPROM_CX_OFFSET, + coefs, sizeof(coefs)); + if (ret < 0) { + dev_err(dev, "Failed to read EEPROM (reg=%02x)\n", + HP03_EEPROM_CX_OFFSET); + return ret; + } + + /* Sample Temperature and Pressure */ + gpiod_set_value_cansleep(priv->xclr_gpio, 1); + + ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_PRESSURE); + if (ret < 0) { + dev_err(dev, "Failed to read pressure\n"); + goto err_adc; + } + d1_val = ret; + + ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_TEMP); + if (ret < 0) { + dev_err(dev, "Failed to read temperature\n"); + goto err_adc; + } + d2_val = ret; + + gpiod_set_value_cansleep(priv->xclr_gpio, 0); + + /* The Cx coefficients and Temp/Pressure values are MSB first. */ + for (i = 0; i < 7; i++) + cx_val[i] = (coefs[2 * i] << 8) | (coefs[(2 * i) + 1] << 0); + d1_val = ((d1_val >> 8) & 0xff) | ((d1_val & 0xff) << 8); + d2_val = ((d2_val >> 8) & 0xff) | ((d2_val & 0xff) << 8); + + /* Coefficient voodoo from the HP03 datasheet. */ + if (d2_val >= cx_val[4]) + ab_val = coefs[14]; /* A-value */ + else + ab_val = coefs[15]; /* B-value */ + + diff_val = d2_val - cx_val[4]; + dut = (ab_val * (diff_val >> 7) * (diff_val >> 7)) >> coefs[16]; + dut = diff_val - dut; + + off = (cx_val[1] + (((cx_val[3] - 1024) * dut) >> 14)) * 4; + sens = cx_val[0] + ((cx_val[2] * dut) >> 10); + x = ((sens * (d1_val - 7168)) >> 14) - off; + + priv->pressure = ((x * 100) >> 5) + (cx_val[6] * 10); + priv->temp = 250 + ((dut * cx_val[5]) >> 16) - (dut >> coefs[17]); + + return 0; + +err_adc: + gpiod_set_value_cansleep(priv->xclr_gpio, 0); + return ret; +} + +static int hp03_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct hp03_priv *priv = iio_priv(indio_dev); + int ret; + + mutex_lock(&priv->lock); + ret = hp03_update_temp_pressure(priv); + mutex_unlock(&priv->lock); + + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_PRESSURE: + *val = priv->pressure; + return IIO_VAL_INT; + case IIO_TEMP: + *val = priv->temp; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_PRESSURE: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 10; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return -EINVAL; +} + +static const struct iio_info hp03_info = { + .driver_module = THIS_MODULE, + .read_raw = &hp03_read_raw, +}; + +static int hp03_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct iio_dev *indio_dev; + struct hp03_priv *priv; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + priv->client = client; + mutex_init(&priv->lock); + + indio_dev->dev.parent = dev; + indio_dev->name = id->name; + indio_dev->channels = hp03_channels; + indio_dev->num_channels = ARRAY_SIZE(hp03_channels); + indio_dev->info = &hp03_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + priv->xclr_gpio = devm_gpiod_get_index(dev, "xclr", 0, GPIOD_OUT_HIGH); + if (IS_ERR(priv->xclr_gpio)) { + dev_err(dev, "Failed to claim XCLR GPIO\n"); + ret = PTR_ERR(priv->xclr_gpio); + return ret; + } + + /* + * Allocate another device for the on-sensor EEPROM, + * which has it's dedicated I2C address and contains + * the calibration constants for the sensor. + */ + priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR); + if (!priv->eeprom_client) { + dev_err(dev, "New EEPROM I2C device failed\n"); + return -ENODEV; + } + + priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client, + &hp03_regmap_config); + if (IS_ERR(priv->eeprom_regmap)) { + dev_err(dev, "Failed to allocate EEPROM regmap\n"); + ret = PTR_ERR(priv->eeprom_regmap); + goto err_cleanup_eeprom_client; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "Failed to register IIO device\n"); + goto err_cleanup_eeprom_regmap; + } + + i2c_set_clientdata(client, indio_dev); + + return 0; + +err_cleanup_eeprom_regmap: + regmap_exit(priv->eeprom_regmap); + +err_cleanup_eeprom_client: + i2c_unregister_device(priv->eeprom_client); + return ret; +} + +static int hp03_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct hp03_priv *priv = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + regmap_exit(priv->eeprom_regmap); + i2c_unregister_device(priv->eeprom_client); + + return 0; +} + +static const struct i2c_device_id hp03_id[] = { + { "hp03", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, hp03_id); + +static struct i2c_driver hp03_driver = { + .driver = { + .name = "hp03", + }, + .probe = hp03_probe, + .remove = hp03_remove, + .id_table = hp03_id, +}; +module_i2c_driver(hp03_driver); + +MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); +MODULE_DESCRIPTION("Driver for Hope RF HP03 pressure and temperature sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c index c4e65868bc28..76578b07bb6e 100644 --- a/drivers/iio/pressure/ms5611_core.c +++ b/drivers/iio/pressure/ms5611_core.c @@ -429,7 +429,7 @@ static void ms5611_fini(const struct iio_dev *indio_dev) } int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, - const char *name, int type) + const char *name, int type) { int ret; struct ms5611_state *st = iio_priv(indio_dev); diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c index 7600483e8cb4..932e05001e1a 100644 --- a/drivers/iio/pressure/ms5611_spi.c +++ b/drivers/iio/pressure/ms5611_spi.c @@ -108,7 +108,7 @@ static int ms5611_spi_probe(struct spi_device *spi) st->client = spi; return ms5611_probe(indio_dev, &spi->dev, spi_get_device_id(spi)->name, - spi_get_device_id(spi)->driver_data); + spi_get_device_id(spi)->driver_data); } static int ms5611_spi_remove(struct spi_device *spi) diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 172393ad34af..9e9b72a8f18f 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -64,6 +64,8 @@ #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20 #define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22 #define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80 +#define ST_PRESS_LPS331AP_OD_IRQ_ADDR 0x22 +#define ST_PRESS_LPS331AP_OD_IRQ_MASK 0x40 #define ST_PRESS_LPS331AP_MULTIREAD_BIT true #define ST_PRESS_LPS331AP_TEMP_OFFSET 42500 @@ -104,6 +106,8 @@ #define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10 #define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22 #define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80 +#define ST_PRESS_LPS25H_OD_IRQ_ADDR 0x22 +#define ST_PRESS_LPS25H_OD_IRQ_MASK 0x40 #define ST_PRESS_LPS25H_MULTIREAD_BIT true #define ST_PRESS_LPS25H_TEMP_OFFSET 42500 #define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 @@ -226,6 +230,9 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR, .mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK, + .addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR, + .mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT, .bootime = 2, @@ -312,6 +319,9 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR, .mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK, + .addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR, + .mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c index 06c0b75ed26a..6f3f8ff2a066 100644 --- a/drivers/staging/iio/accel/adis16201_core.c +++ b/drivers/staging/iio/accel/adis16201_core.c @@ -167,6 +167,7 @@ static const struct adis_data adis16201_data = { .diag_stat_reg = ADIS16201_DIAG_STAT, .self_test_mask = ADIS16201_MSC_CTRL_SELF_TEST_EN, + .self_test_no_autoclear = true, .startup_delay = ADIS16201_STARTUP_DELAY, .status_error_msgs = adis16201_status_error_msgs, diff --git a/drivers/staging/iio/accel/adis16203_core.c b/drivers/staging/iio/accel/adis16203_core.c index de5b84ac842b..c70671778bae 100644 --- a/drivers/staging/iio/accel/adis16203_core.c +++ b/drivers/staging/iio/accel/adis16203_core.c @@ -134,6 +134,7 @@ static const struct adis_data adis16203_data = { .diag_stat_reg = ADIS16203_DIAG_STAT, .self_test_mask = ADIS16203_MSC_CTRL_SELF_TEST_EN, + .self_test_no_autoclear = true, .startup_delay = ADIS16203_STARTUP_DELAY, .status_error_msgs = adis16203_status_error_msgs, diff --git a/drivers/staging/iio/accel/adis16209_core.c b/drivers/staging/iio/accel/adis16209_core.c index 8b42bf8c3f60..8dbad58628a1 100644 --- a/drivers/staging/iio/accel/adis16209_core.c +++ b/drivers/staging/iio/accel/adis16209_core.c @@ -168,6 +168,7 @@ static const struct adis_data adis16209_data = { .diag_stat_reg = ADIS16209_DIAG_STAT, .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN, + .self_test_no_autoclear = true, .startup_delay = ADIS16209_STARTUP_DELAY, .status_error_msgs = adis16209_status_error_msgs, diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c index a425e1894863..d5b99e610d08 100644 --- a/drivers/staging/iio/accel/adis16240_core.c +++ b/drivers/staging/iio/accel/adis16240_core.c @@ -222,6 +222,7 @@ static const struct adis_data adis16240_data = { .diag_stat_reg = ADIS16240_DIAG_STAT, .self_test_mask = ADIS16240_MSC_CTRL_SELF_TEST_EN, + .self_test_no_autoclear = true, .startup_delay = ADIS16240_STARTUP_DELAY, .status_error_msgs = adis16240_status_error_msgs, diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c index 6dbc811730ae..f79ee61851f6 100644 --- a/drivers/staging/iio/adc/ad7606_core.c +++ b/drivers/staging/iio/adc/ad7606_core.c @@ -88,12 +88,12 @@ static int ad7606_read_raw(struct iio_dev *indio_dev, switch (m) { case IIO_CHAN_INFO_RAW: - mutex_lock(&indio_dev->mlock); - if (iio_buffer_enabled(indio_dev)) - ret = -EBUSY; - else - ret = ad7606_scan_direct(indio_dev, chan->address); - mutex_unlock(&indio_dev->mlock); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = ad7606_scan_direct(indio_dev, chan->address); + iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; diff --git a/include/dt-bindings/iio/adi,ad5592r.h b/include/dt-bindings/iio/adi,ad5592r.h new file mode 100644 index 000000000000..c48aca1dcade --- /dev/null +++ b/include/dt-bindings/iio/adi,ad5592r.h @@ -0,0 +1,16 @@ + +#ifndef _DT_BINDINGS_ADI_AD5592R_H +#define _DT_BINDINGS_ADI_AD5592R_H + +#define CH_MODE_UNUSED 0 +#define CH_MODE_ADC 1 +#define CH_MODE_DAC 2 +#define CH_MODE_DAC_AND_ADC 3 +#define CH_MODE_GPIO 8 + +#define CH_OFFSTATE_PULLDOWN 0 +#define CH_OFFSTATE_OUT_LOW 1 +#define CH_OFFSTATE_OUT_HIGH 2 +#define CH_OFFSTATE_OUT_TRISTATE 3 + +#endif /* _DT_BINDINGS_ADI_AD5592R_H */ diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 6670c3d25c58..d029ffac0d69 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -37,6 +37,7 @@ #define ST_SENSORS_DEFAULT_AXIS_ADDR 0x20 #define ST_SENSORS_DEFAULT_AXIS_MASK 0x07 #define ST_SENSORS_DEFAULT_AXIS_N_BIT 3 +#define ST_SENSORS_DEFAULT_STAT_ADDR 0x27 #define ST_SENSORS_MAX_NAME 17 #define ST_SENSORS_MAX_4WAI 7 @@ -121,6 +122,9 @@ struct st_sensor_bdu { * @mask_int2: mask to enable/disable IRQ on INT2 pin. * @addr_ihl: address to enable/disable active low on the INT lines. * @mask_ihl: mask to enable/disable active low on the INT lines. + * @addr_od: address to enable/disable Open Drain on the INT lines. + * @mask_od: mask to enable/disable Open Drain on the INT lines. + * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. @@ -131,6 +135,9 @@ struct st_sensor_data_ready_irq { u8 mask_int2; u8 addr_ihl; u8 mask_ihl; + u8 addr_od; + u8 mask_od; + u8 addr_stat_drdy; struct { u8 en_addr; u8 en_mask; @@ -212,6 +219,7 @@ struct st_sensor_settings { * @odr: Output data rate of the sensor [Hz]. * num_data_channels: Number of data channels used in buffer. * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). + * @int_pin_open_drain: Set the interrupt/DRDY to open drain. * @get_irq_data_ready: Function to get the IRQ used for data ready signal. * @tf: Transfer function structure used by I/O operations. * @tb: Transfer buffers and mutex used by I/O operations. @@ -233,6 +241,7 @@ struct st_sensor_data { unsigned int num_data_channels; u8 drdy_int_pin; + bool int_pin_open_drain; unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev); diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index fad58671c49e..3d672f72e7ec 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -49,6 +49,33 @@ struct iio_channel *iio_channel_get(struct device *dev, void iio_channel_release(struct iio_channel *chan); /** + * devm_iio_channel_get() - Resource managed version of iio_channel_get(). + * @dev: Pointer to consumer device. Device name must match + * the name of the device as provided in the iio_map + * with which the desired provider to consumer mapping + * was registered. + * @consumer_channel: Unique name to identify the channel on the consumer + * side. This typically describes the channels use within + * the consumer. E.g. 'battery_voltage' + * + * Returns a pointer to negative errno if it is not able to get the iio channel + * otherwise returns valid pointer for iio channel. + * + * The allocated iio channel is automatically released when the device is + * unbound. + */ +struct iio_channel *devm_iio_channel_get(struct device *dev, + const char *consumer_channel); +/** + * devm_iio_channel_release() - Resource managed version of + * iio_channel_release(). + * @dev: Pointer to consumer device for which resource + * is allocared. + * @chan: The channel to be released. + */ +void devm_iio_channel_release(struct device *dev, struct iio_channel *chan); + +/** * iio_channel_get_all() - get all channels associated with a client * @dev: Pointer to consumer device. * @@ -65,6 +92,32 @@ struct iio_channel *iio_channel_get_all(struct device *dev); */ void iio_channel_release_all(struct iio_channel *chan); +/** + * devm_iio_channel_get_all() - Resource managed version of + * iio_channel_get_all(). + * @dev: Pointer to consumer device. + * + * Returns a pointer to negative errno if it is not able to get the iio channel + * otherwise returns an array of iio_channel structures terminated with one with + * null iio_dev pointer. + * + * This function is used by fairly generic consumers to get all the + * channels registered as having this consumer. + * + * The allocated iio channels are automatically released when the device is + * unbounded. + */ +struct iio_channel *devm_iio_channel_get_all(struct device *dev); + +/** + * devm_iio_channel_release_all() - Resource managed version of + * iio_channel_release_all(). + * @dev: Pointer to consumer device for which resource + * is allocared. + * @chan: Array channel to be released. + */ +void devm_iio_channel_release_all(struct device *dev, struct iio_channel *chan); + struct iio_cb_buffer; /** * iio_channel_get_all_cb() - register callback for triggered capture diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 0b2773ada0ba..7c29cb0124ae 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -148,6 +148,37 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, } /** + * struct iio_mount_matrix - iio mounting matrix + * @rotation: 3 dimensional space rotation matrix defining sensor alignment with + * main hardware + */ +struct iio_mount_matrix { + const char *rotation[9]; +}; + +ssize_t iio_show_mount_matrix(struct iio_dev *indio_dev, uintptr_t priv, + const struct iio_chan_spec *chan, char *buf); +int of_iio_read_mount_matrix(const struct device *dev, const char *propname, + struct iio_mount_matrix *matrix); + +typedef const struct iio_mount_matrix * + (iio_get_mount_matrix_t)(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan); + +/** + * IIO_MOUNT_MATRIX() - Initialize mount matrix extended channel attribute + * @_shared: Whether the attribute is shared between all channels + * @_get: Pointer to an iio_get_mount_matrix_t accessor + */ +#define IIO_MOUNT_MATRIX(_shared, _get) \ +{ \ + .name = "mount_matrix", \ + .shared = (_shared), \ + .read = iio_show_mount_matrix, \ + .private = (uintptr_t)(_get), \ +} + +/** * struct iio_event_spec - specification for a channel event * @type: Type of the event * @dir: Direction of the event diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h index fa2d01ef8f55..360da7d18a3d 100644 --- a/include/linux/iio/imu/adis.h +++ b/include/linux/iio/imu/adis.h @@ -41,6 +41,7 @@ struct adis_data { unsigned int diag_stat_reg; unsigned int self_test_mask; + bool self_test_no_autoclear; unsigned int startup_delay; const char * const *status_error_msgs; diff --git a/include/linux/iio/magnetometer/ak8975.h b/include/linux/iio/magnetometer/ak8975.h new file mode 100644 index 000000000000..c8400959d197 --- /dev/null +++ b/include/linux/iio/magnetometer/ak8975.h @@ -0,0 +1,16 @@ +#ifndef __IIO_MAGNETOMETER_AK8975_H__ +#define __IIO_MAGNETOMETER_AK8975_H__ + +#include <linux/iio/iio.h> + +/** + * struct ak8975_platform_data - AK8975 magnetometer driver platform data + * @eoc_gpio: data ready event gpio + * @orientation: mounting matrix relative to main hardware + */ +struct ak8975_platform_data { + int eoc_gpio; + struct iio_mount_matrix orientation; +}; + +#endif diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h index ad3aa7b95f35..554b59801aa8 100644 --- a/include/linux/platform_data/invensense_mpu6050.h +++ b/include/linux/platform_data/invensense_mpu6050.h @@ -16,13 +16,16 @@ /** * struct inv_mpu6050_platform_data - Platform data for the mpu driver - * @orientation: Orientation matrix of the chip + * @orientation: Orientation matrix of the chip (deprecated in favor of + * mounting matrix retrieved from device-tree) * * Contains platform specific information on how to configure the MPU6050 to * work on this platform. The orientation matricies are 3x3 rotation matricies * that are applied to the data to rotate from the mounting orientation to the * platform orientation. The values must be one of 0, 1, or -1 and each row and * column should have exactly 1 non-zero value. + * + * Deprecated in favor of mounting matrix retrieved from device-tree. */ struct inv_mpu6050_platform_data { __s8 orientation[9]; diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index 753839187ba0..79b0e4cdb814 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -16,9 +16,11 @@ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). * Available only for accelerometer and pressure sensors. * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). + * @open_drain: set the interrupt line to be open drain if possible. */ struct st_sensors_platform_data { u8 drdy_int_pin; + bool open_drain; }; #endif /* ST_SENSORS_PDATA_H */ diff --git a/tools/iio/generic_buffer.c b/tools/iio/generic_buffer.c index c42b7f836b48..2429c78de940 100644 --- a/tools/iio/generic_buffer.c +++ b/tools/iio/generic_buffer.c @@ -35,6 +35,15 @@ #include "iio_utils.h" /** + * enum autochan - state for the automatic channel enabling mechanism + */ +enum autochan { + AUTOCHANNELS_DISABLED, + AUTOCHANNELS_ENABLED, + AUTOCHANNELS_ACTIVE, +}; + +/** * size_from_channelarray() - calculate the storage size of a scan * @channels: the channel info array * @num_channels: number of channels @@ -191,10 +200,51 @@ void process_scan(char *data, printf("\n"); } +static int enable_disable_all_channels(char *dev_dir_name, int enable) +{ + const struct dirent *ent; + char scanelemdir[256]; + DIR *dp; + int ret; + + snprintf(scanelemdir, sizeof(scanelemdir), + FORMAT_SCAN_ELEMENTS_DIR, dev_dir_name); + scanelemdir[sizeof(scanelemdir)-1] = '\0'; + + dp = opendir(scanelemdir); + if (!dp) { + fprintf(stderr, "Enabling/disabling channels: can't open %s\n", + scanelemdir); + return -EIO; + } + + ret = -ENOENT; + while (ent = readdir(dp), ent) { + if (iioutils_check_suffix(ent->d_name, "_en")) { + printf("%sabling: %s\n", + enable ? "En" : "Dis", + ent->d_name); + ret = write_sysfs_int(ent->d_name, scanelemdir, + enable); + if (ret < 0) + fprintf(stderr, "Failed to enable/disable %s\n", + ent->d_name); + } + } + + if (closedir(dp) == -1) { + perror("Enabling/disabling channels: " + "Failed to close directory"); + return -errno; + } + return 0; +} + void print_usage(void) { fprintf(stderr, "Usage: generic_buffer [options]...\n" "Capture, convert and output data from IIO device buffer\n" + " -a Auto-activate all available channels\n" " -c <n> Do n conversions\n" " -e Disable wait for event (new data)\n" " -g Use trigger-less mode\n" @@ -225,12 +275,16 @@ int main(int argc, char **argv) int scan_size; int noevents = 0; int notrigger = 0; + enum autochan autochannels = AUTOCHANNELS_DISABLED; char *dummy; struct iio_channel_info *channels; - while ((c = getopt(argc, argv, "c:egl:n:t:w:")) != -1) { + while ((c = getopt(argc, argv, "ac:egl:n:t:w:")) != -1) { switch (c) { + case 'a': + autochannels = AUTOCHANNELS_ENABLED; + break; case 'c': errno = 0; num_loops = strtoul(optarg, &dummy, 10); @@ -340,12 +394,47 @@ int main(int argc, char **argv) "diag %s\n", dev_dir_name); goto error_free_triggername; } - if (!num_channels) { + if (num_channels && autochannels == AUTOCHANNELS_ENABLED) { + fprintf(stderr, "Auto-channels selected but some channels " + "are already activated in sysfs\n"); + fprintf(stderr, "Proceeding without activating any channels\n"); + } + + if (!num_channels && autochannels == AUTOCHANNELS_ENABLED) { + fprintf(stderr, + "No channels are enabled, enabling all channels\n"); + + ret = enable_disable_all_channels(dev_dir_name, 1); + if (ret) { + fprintf(stderr, "Failed to enable all channels\n"); + goto error_free_triggername; + } + + /* This flags that we need to disable the channels again */ + autochannels = AUTOCHANNELS_ACTIVE; + + ret = build_channel_array(dev_dir_name, &channels, + &num_channels); + if (ret) { + fprintf(stderr, "Problem reading scan element " + "information\n" + "diag %s\n", dev_dir_name); + goto error_disable_channels; + } + if (!num_channels) { + fprintf(stderr, "Still no channels after " + "auto-enabling, giving up\n"); + goto error_disable_channels; + } + } + + if (!num_channels && autochannels == AUTOCHANNELS_DISABLED) { fprintf(stderr, "No channels are enabled, we have nothing to scan.\n"); fprintf(stderr, "Enable channels manually in " FORMAT_SCAN_ELEMENTS_DIR - "/*_en and try again.\n", dev_dir_name); + "/*_en or pass -a to autoenable channels and " + "try again.\n", dev_dir_name); ret = -ENOENT; goto error_free_triggername; } @@ -479,7 +568,12 @@ error_free_channels: error_free_triggername: if (datardytrigger) free(trigger_name); - +error_disable_channels: + if (autochannels == AUTOCHANNELS_ACTIVE) { + ret = enable_disable_all_channels(dev_dir_name, 0); + if (ret) + fprintf(stderr, "Failed to disable all channels\n"); + } error_free_dev_dir_name: free(dev_dir_name); diff --git a/tools/iio/iio_utils.h b/tools/iio/iio_utils.h index e3503bfe538b..780f2014f8fa 100644 --- a/tools/iio/iio_utils.h +++ b/tools/iio/iio_utils.h @@ -52,6 +52,13 @@ struct iio_channel_info { unsigned location; }; +static inline int iioutils_check_suffix(const char *str, const char *suffix) +{ + return strlen(str) >= strlen(suffix) && + strncmp(str+strlen(str)-strlen(suffix), + suffix, strlen(suffix)) == 0; +} + int iioutils_break_up_name(const char *full_name, char **generic_name); int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used, unsigned *shift, uint64_t *mask, unsigned *be, |