diff options
author | Oleksij Rempel <o.rempel@pengutronix.de> | 2022-05-06 06:23:57 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2022-05-09 12:09:30 +0100 |
commit | 165cd04fe25392f875ebb94188c4faa20905290d (patch) | |
tree | 73d7539d869f21835b13d3fec8a3b91268c7410b | |
parent | 2013ad8836aceb828c0fb5b16fa8bb98fd3d9b28 (diff) |
net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY
The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
that supports 10M single pair cable.
This driver was tested with NXP SJA1105, STMMAC and ASIX AX88772B USB Ethernet
controller.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/phy/Kconfig | 6 | ||||
-rw-r--r-- | drivers/net/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/phy/dp83td510.c | 209 |
3 files changed, 216 insertions, 0 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index bbbf6c07ea53..9fee639ee5c8 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -342,6 +342,12 @@ config DP83869_PHY Currently supports the DP83869 PHY. This PHY supports copper and fiber connections. +config DP83TD510_PHY + tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY" + help + Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports + a 10M single pair Ethernet connection for up to 1000 meter cable. + config VITESSE_PHY tristate "Vitesse PHYs" help diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index b82651b57043..b12b1d86fc99 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_DP83848_PHY) += dp83848.o obj-$(CONFIG_DP83867_PHY) += dp83867.o obj-$(CONFIG_DP83869_PHY) += dp83869.o obj-$(CONFIG_DP83TC811_PHY) += dp83tc811.o +obj-$(CONFIG_DP83TD510_PHY) += dp83td510.o obj-$(CONFIG_FIXED_PHY) += fixed_phy.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c new file mode 100644 index 000000000000..1ae792b0daaa --- /dev/null +++ b/drivers/net/phy/dp83td510.c @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Driver for the Texas Instruments DP83TD510 PHY + * Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> + */ + +#include <linux/bitfield.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/phy.h> + +#define DP83TD510E_PHY_ID 0x20000181 + +/* MDIO_MMD_VEND2 registers */ +#define DP83TD510E_PHY_STS 0x10 +#define DP83TD510E_STS_MII_INT BIT(7) +#define DP83TD510E_LINK_STATUS BIT(0) + +#define DP83TD510E_GEN_CFG 0x11 +#define DP83TD510E_GENCFG_INT_POLARITY BIT(3) +#define DP83TD510E_GENCFG_INT_EN BIT(1) +#define DP83TD510E_GENCFG_INT_OE BIT(0) + +#define DP83TD510E_INTERRUPT_REG_1 0x12 +#define DP83TD510E_INT1_LINK BIT(13) +#define DP83TD510E_INT1_LINK_EN BIT(5) + +#define DP83TD510E_AN_STAT_1 0x60c +#define DP83TD510E_MASTER_SLAVE_RESOL_FAIL BIT(15) + +static int dp83td510_config_intr(struct phy_device *phydev) +{ + int ret; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + /* Clear any pending interrupts */ + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS, + 0x0); + if (ret) + return ret; + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_INTERRUPT_REG_1, + DP83TD510E_INT1_LINK_EN); + if (ret) + return ret; + + ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_GEN_CFG, + DP83TD510E_GENCFG_INT_POLARITY | + DP83TD510E_GENCFG_INT_EN | + DP83TD510E_GENCFG_INT_OE); + } else { + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_INTERRUPT_REG_1, 0x0); + if (ret) + return ret; + + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_GEN_CFG, + DP83TD510E_GENCFG_INT_EN); + if (ret) + return ret; + + /* Clear any pending interrupts */ + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS, + 0x0); + } + + return ret; +} + +static irqreturn_t dp83td510_handle_interrupt(struct phy_device *phydev) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS); + if (ret < 0) { + phy_error(phydev); + return IRQ_NONE; + } else if (!(ret & DP83TD510E_STS_MII_INT)) { + return IRQ_NONE; + } + + /* Read the current enabled interrupts */ + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_INTERRUPT_REG_1); + if (ret < 0) { + phy_error(phydev); + return IRQ_NONE; + } else if (!(ret & DP83TD510E_INT1_LINK_EN) || + !(ret & DP83TD510E_INT1_LINK)) { + return IRQ_NONE; + } + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static int dp83td510_read_status(struct phy_device *phydev) +{ + u16 phy_sts; + int ret; + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + linkmode_zero(phydev->lp_advertising); + + phy_sts = phy_read(phydev, DP83TD510E_PHY_STS); + + phydev->link = !!(phy_sts & DP83TD510E_LINK_STATUS); + if (phydev->link) { + /* This PHY supports only one link mode: 10BaseT1L_Full */ + phydev->duplex = DUPLEX_FULL; + phydev->speed = SPEED_10; + + if (phydev->autoneg == AUTONEG_ENABLE) { + ret = genphy_c45_read_lpa(phydev); + if (ret) + return ret; + + phy_resolve_aneg_linkmode(phydev); + } + } + + if (phydev->autoneg == AUTONEG_ENABLE) { + ret = genphy_c45_baset1_read_status(phydev); + if (ret < 0) + return ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_AN_STAT_1); + if (ret < 0) + return ret; + + if (ret & DP83TD510E_MASTER_SLAVE_RESOL_FAIL) + phydev->master_slave_state = MASTER_SLAVE_STATE_ERR; + } else { + return genphy_c45_pma_baset1_read_master_slave(phydev); + } + + return 0; +} + +static int dp83td510_config_aneg(struct phy_device *phydev) +{ + bool changed = false; + int ret; + + ret = genphy_c45_pma_baset1_setup_master_slave(phydev); + if (ret < 0) + return ret; + + if (phydev->autoneg == AUTONEG_DISABLE) + return genphy_c45_an_disable_aneg(phydev); + + ret = genphy_c45_an_config_aneg(phydev); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + return genphy_c45_check_and_restart_aneg(phydev, changed); +} + +static int dp83td510_get_features(struct phy_device *phydev) +{ + /* This PHY can't respond on MDIO bus if no RMII clock is enabled. + * In case RMII mode is used (most meaningful mode for this PHY) and + * the PHY do not have own XTAL, and CLK providing MAC is not probed, + * we won't be able to read all needed ability registers. + * So provide it manually. + */ + + linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, + phydev->supported); + + return 0; +} + +static struct phy_driver dp83td510_driver[] = { +{ + PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID), + .name = "TI DP83TD510E", + + .config_aneg = dp83td510_config_aneg, + .read_status = dp83td510_read_status, + .get_features = dp83td510_get_features, + .config_intr = dp83td510_config_intr, + .handle_interrupt = dp83td510_handle_interrupt, + + .suspend = genphy_suspend, + .resume = genphy_resume, +} }; +module_phy_driver(dp83td510_driver); + +static struct mdio_device_id __maybe_unused dp83td510_tbl[] = { + { PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID) }, + { } +}; +MODULE_DEVICE_TABLE(mdio, dp83td510_tbl); + +MODULE_DESCRIPTION("Texas Instruments DP83TD510E PHY driver"); +MODULE_AUTHOR("Oleksij Rempel <kernel@pengutronix.de>"); +MODULE_LICENSE("GPL v2"); |