arm/imx2x: removes a bunch of sparse-warnings

Here are some of the warnings that get fixed by this:

> 200 times: warning: cast adds address space to expression (<asn:2>)
twelve times: warning: symbol 'xxx' was not declared. Should it be static
two times: warning: symbol 'clock' shadows an earlier one
five times: warning: incorrect type in initializer (different address spaces)

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 files changed, 22 insertions, 19 deletions

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 2f9240be1c76..9ddd6d061058 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -34,6 +34,9 @@
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
+
+#include "devices.h"
 
 /*
  * Resource definition for the MXC IrDA
@@ -230,32 +233,32 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
 	[0] = {
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR),
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
 	},
 	[1] = {
 		.chip.label = "gpio-1",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
 	},
 	[2] = {
 		.chip.label = "gpio-2",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
 	},
 	[3] = {
 		.chip.label = "gpio-3",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	},
 	[4] = {
 		.chip.label = "gpio-4",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
 	},
 	[5] = {
 		.chip.label = "gpio-5",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
 	}
 };
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index dea6521d4d5c..bd51dd04948e 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -21,6 +21,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 536bf64bc7c8..4548631eb3ae 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -266,7 +266,7 @@ static void __init mx27ads_timer_init(void)
 	mx27_clocks_init(fref);
 }
 
-struct sys_timer mx27ads_timer = {
+static struct sys_timer mx27ads_timer = {
 	.init	= mx27ads_timer_init,
 };
 
@@ -279,7 +279,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
 	},
 };
 
-void __init mx27ads_map_io(void)
+static void __init mx27ads_map_io(void)
 {
 	mxc_map_io();
 	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 63cdef8565db..2942d59b5709 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -233,7 +233,7 @@ static void __init pcm038_timer_init(void)
 	mx27_clocks_init(26000000);
 }
 
-struct sys_timer pcm038_timer = {
+static struct sys_timer pcm038_timer = {
 	.init = pcm038_timer_init,
 };
 
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index b9e66fb11860..40a485cdc10e 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -22,6 +22,7 @@
 #include <linux/serial.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
+#include "devices.h"
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index c66748267c45..56f2fb5cc456 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <mach/common.h>
 
 int __init mxc_register_device(struct platform_device *pdev, void *data)
 {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 8f34a05afc87..1cac9d1135cd 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -48,7 +48,8 @@
  * Base address of PBC controller, CS4
  */
 #define PBC_BASE_ADDRESS        0xEB000000
-#define PBC_REG_ADDR(offset)    (PBC_BASE_ADDRESS + (offset))
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+		(PBC_BASE_ADDRESS + (offset))
 
 /*
  * PBC Interupt name definitions
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 0313be720552..9c609d3ba23e 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -129,7 +129,7 @@
  * it returns 0xDEADBEEF
  */
 #define IO_ADDRESS(x)   \
-	(void __iomem *) \
+	(void __force __iomem *) \
 	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
 		AIPI_IO_ADDRESS(x) : \
 	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index eb93fd1789db..ef1b3cd85bd3 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -52,11 +52,9 @@ static struct clocksource clocksource_mxc = {
 
 static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
-	unsigned int clock;
+	unsigned int c = clk_get_rate(timer_clk);
 
-	clock = clk_get_rate(timer_clk);
-
-	clocksource_mxc.mult = clocksource_hz2mult(clock,
+	clocksource_mxc.mult = clocksource_hz2mult(c,
 					clocksource_mxc.shift);
 	clocksource_register(&clocksource_mxc);
 
@@ -176,11 +174,9 @@ static struct clock_event_device clockevent_mxc = {
 
 static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
-	unsigned int clock;
-
-	clock = clk_get_rate(timer_clk);
+	unsigned int c = clk_get_rate(timer_clk);
 
-	clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
+	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_mxc.shift);
 	clockevent_mxc.max_delta_ns =
 			clockevent_delta2ns(0xfffffffe, &clockevent_mxc);