1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
|
/* SPDX-License-Identifier: MIT */
/*
* Copyright © 2022 Intel Corporation
*/
#ifndef __INTEL_BACKLIGHT_REGS_H__
#define __INTEL_BACKLIGHT_REGS_H__
#include "i915_reg_defs.h"
#define _VLV_BLC_PWM_CTL2_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61250)
#define _VLV_BLC_PWM_CTL2_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61350)
#define VLV_BLC_PWM_CTL2(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL2_A, \
_VLV_BLC_PWM_CTL2_B)
#define _VLV_BLC_PWM_CTL_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61254)
#define _VLV_BLC_PWM_CTL_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61354)
#define VLV_BLC_PWM_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL_A, \
_VLV_BLC_PWM_CTL_B)
#define _VLV_BLC_HIST_CTL_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61260)
#define _VLV_BLC_HIST_CTL_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61360)
#define VLV_BLC_HIST_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_HIST_CTL_A, \
_VLV_BLC_HIST_CTL_B)
/* Backlight control */
#define BLC_PWM_CTL2 _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61250) /* 965+ only */
#define BLM_PWM_ENABLE (1 << 31)
#define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */
#define BLM_PIPE_SELECT (1 << 29)
#define BLM_PIPE_SELECT_IVB (3 << 29)
#define BLM_PIPE_A (0 << 29)
#define BLM_PIPE_B (1 << 29)
#define BLM_PIPE_C (2 << 29) /* ivb + */
#define BLM_TRANSCODER_A BLM_PIPE_A /* hsw */
#define BLM_TRANSCODER_B BLM_PIPE_B
#define BLM_TRANSCODER_C BLM_PIPE_C
#define BLM_TRANSCODER_EDP (3 << 29)
#define BLM_PIPE(pipe) ((pipe) << 29)
#define BLM_POLARITY_I965 (1 << 28) /* gen4 only */
#define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26)
#define BLM_PHASE_IN_ENABLE (1 << 25)
#define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24)
#define BLM_PHASE_IN_TIME_BASE_SHIFT (16)
#define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16)
#define BLM_PHASE_IN_COUNT_SHIFT (8)
#define BLM_PHASE_IN_COUNT_MASK (0xff << 8)
#define BLM_PHASE_IN_INCR_SHIFT (0)
#define BLM_PHASE_IN_INCR_MASK (0xff << 0)
#define BLC_PWM_CTL _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61254)
/*
* This is the most significant 15 bits of the number of backlight cycles in a
* complete cycle of the modulated backlight control.
*
* The actual value is this field multiplied by two.
*/
#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
#define BLM_LEGACY_MODE (1 << 16) /* gen2 only */
/*
* This is the number of cycles out of the backlight modulation cycle for which
* the backlight is on.
*
* This field must be no greater than the number of cycles in the complete
* backlight modulation cycle.
*/
#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
#define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe)
#define BLM_POLARITY_PNV (1 << 0) /* pnv only */
#define BLC_HIST_CTL _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61260)
#define BLM_HISTOGRAM_ENABLE (1 << 31)
/* New registers for PCH-split platforms. Safe where new bits show up, the
* register layout machtes with gen4 BLC_PWM_CTL[12]. */
#define BLC_PWM_CPU_CTL2 _MMIO(0x48250)
#define BLC_PWM_CPU_CTL _MMIO(0x48254)
#define HSW_BLC_PWM2_CTL _MMIO(0x48350)
/* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is
* like the normal CTL from gen4 and earlier. Hooray for confusing naming. */
#define BLC_PWM_PCH_CTL1 _MMIO(0xc8250)
#define BLM_PCH_PWM_ENABLE (1 << 31)
#define BLM_PCH_OVERRIDE_ENABLE (1 << 30)
#define BLM_PCH_POLARITY (1 << 29)
#define BLC_PWM_PCH_CTL2 _MMIO(0xc8254)
/* BXT backlight register definition. */
#define _BXT_BLC_PWM_CTL1 0xC8250
#define BXT_BLC_PWM_ENABLE (1 << 31)
#define BXT_BLC_PWM_POLARITY (1 << 29)
#define _BXT_BLC_PWM_FREQ1 0xC8254
#define _BXT_BLC_PWM_DUTY1 0xC8258
#define _BXT_BLC_PWM_CTL2 0xC8350
#define _BXT_BLC_PWM_FREQ2 0xC8354
#define _BXT_BLC_PWM_DUTY2 0xC8358
#define BXT_BLC_PWM_CTL(controller) _MMIO_PIPE(controller, \
_BXT_BLC_PWM_CTL1, _BXT_BLC_PWM_CTL2)
#define BXT_BLC_PWM_FREQ(controller) _MMIO_PIPE(controller, \
_BXT_BLC_PWM_FREQ1, _BXT_BLC_PWM_FREQ2)
#define BXT_BLC_PWM_DUTY(controller) _MMIO_PIPE(controller, \
_BXT_BLC_PWM_DUTY1, _BXT_BLC_PWM_DUTY2)
/* Utility pin */
#define UTIL_PIN_CTL _MMIO(0x48400)
#define UTIL_PIN_ENABLE (1 << 31)
#define UTIL_PIN_PIPE_MASK (3 << 29)
#define UTIL_PIN_PIPE(x) ((x) << 29)
#define UTIL_PIN_MODE_MASK (0xf << 24)
#define UTIL_PIN_MODE_DATA (0 << 24)
#define UTIL_PIN_MODE_PWM (1 << 24)
#define UTIL_PIN_MODE_VBLANK (4 << 24)
#define UTIL_PIN_MODE_VSYNC (5 << 24)
#define UTIL_PIN_MODE_EYE_LEVEL (8 << 24)
#define UTIL_PIN_OUTPUT_DATA (1 << 23)
#define UTIL_PIN_POLARITY (1 << 22)
#define UTIL_PIN_DIRECTION_INPUT (1 << 19)
#define UTIL_PIN_INPUT_DATA (1 << 16)
#endif /* __INTEL_BACKLIGHT_REGS_H__ */
|
