1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
|
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Samsung Exynos SoC HDMI
maintainers:
- Inki Dae <inki.dae@samsung.com>
- Joonyoung Shim <jy0922.shim@samsung.com>
- Seung-Woo Kim <sw0312.kim@samsung.com>
- Kyungmin Park <kyungmin.park@samsung.com>
- Krzysztof Kozlowski <krzk@kernel.org>
properties:
compatible:
enum:
- samsung,exynos4210-hdmi
- samsung,exynos4212-hdmi
- samsung,exynos5420-hdmi
- samsung,exynos5433-hdmi
clocks:
minItems: 5
maxItems: 10
clock-names:
minItems: 5
maxItems: 10
ddc:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the HDMI DDC node.
hdmi-en-supply:
description:
Provides voltage source for DCC lines available on HDMI connector. When
there is no power provided for DDC epprom, some TV-sets do not pulls up
HPD (hot plug detect) line, what causes HDMI block to stay turned off.
When provided, the regulator allows TV-set correctly signal HPD event.
hpd-gpios:
maxItems: 1
description:
A GPIO line connected to HPD
interrupts:
maxItems: 1
phy:
$ref: /schemas/types.yaml#/definitions/phandle
description: Phandle to the HDMI PHY node.
ports:
$ref: /schemas/graph.yaml#/properties/ports
description:
Contains a port which is connected to mic node.
power-domains:
maxItems: 1
reg:
maxItems: 1
samsung,syscon-phandle:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the PMU system controller node.
samsung,sysreg-phandle:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to DISP system controller interface.
'#sound-dai-cells':
const: 0
vdd-supply:
description:
VDD 1.0V HDMI TX.
vdd_osc-supply:
description:
VDD 1.8V HDMI OSC.
vdd_pll-supply:
description:
VDD 1.0V HDMI PLL.
required:
- compatible
- clocks
- clock-names
- ddc
- hpd-gpios
- interrupts
- phy
- reg
- samsung,syscon-phandle
- '#sound-dai-cells'
- vdd-supply
- vdd_osc-supply
- vdd_pll-supply
allOf:
- if:
properties:
compatible:
contains:
const: samsung,exynos5433-hdmi
then:
properties:
clocks:
items:
- description: Gate of HDMI IP APB bus.
- description: Gate of HDMI-PHY IP APB bus.
- description: Gate of HDMI TMDS clock.
- description: Gate of HDMI pixel clock.
- description: TMDS clock generated by HDMI-PHY.
- description: MUX used to switch between oscclk and tmds_clko,
respectively if HDMI-PHY is off and operational.
- description: Pixel clock generated by HDMI-PHY.
- description: MUX used to switch between oscclk and pixel_clko,
respectively if HDMI-PHY is off and operational.
- description: Oscillator clock, used as parent of following *_user
clocks in case HDMI-PHY is not operational.
- description: Gate of HDMI SPDIF clock.
clock-names:
items:
- const: hdmi_pclk
- const: hdmi_i_pclk
- const: i_tmds_clk
- const: i_pixel_clk
- const: tmds_clko
- const: tmds_clko_user
- const: pixel_clko
- const: pixel_clko_user
- const: oscclk
- const: i_spdif_clk
required:
- samsung,sysreg-phandle
else:
properties:
clocks:
items:
- description: Gate of HDMI IP bus clock.
- description: Gate of HDMI special clock.
- description: Pixel special clock, one of the two possible inputs
of HDMI clock mux.
- description: HDMI PHY clock output, one of two possible inputs of
HDMI clock mux.
- description: It is required by the driver to switch between the 2
parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
after configuration, parent is set to sclk_hdmiphy else
sclk_pixel.
clock-names:
items:
- const: hdmi
- const: sclk_hdmi
- const: sclk_pixel
- const: sclk_hdmiphy
- const: mout_hdmi
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/exynos5433.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
hdmi@13970000 {
compatible = "samsung,exynos5433-hdmi";
reg = <0x13970000 0x70000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_disp CLK_PCLK_HDMI>,
<&cmu_disp CLK_PCLK_HDMIPHY>,
<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
<&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
<&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
<&xxti>,
<&cmu_disp CLK_SCLK_HDMI_SPDIF>;
clock-names = "hdmi_pclk",
"hdmi_i_pclk",
"i_tmds_clk",
"i_pixel_clk",
"tmds_clko",
"tmds_clko_user",
"pixel_clko",
"pixel_clko_user",
"oscclk",
"i_spdif_clk";
phy = <&hdmiphy>;
ddc = <&hsi2c_11>;
samsung,syscon-phandle = <&pmu_system_controller>;
samsung,sysreg-phandle = <&syscon_disp>;
#sound-dai-cells = <0>;
hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
vdd-supply = <&ldo6_reg>;
vdd_osc-supply = <&ldo7_reg>;
vdd_pll-supply = <&ldo6_reg>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
hdmi_to_tv: endpoint {
remote-endpoint = <&tv_to_hdmi>;
};
};
port@1 {
reg = <1>;
hdmi_to_mhl: endpoint {
remote-endpoint = <&mhl_to_hdmi>;
};
};
};
};
|
