1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Rockchip DWC HDMI TX Encoder
maintainers:
- Mark Yao <markyao0591@gmail.com>
description: |
The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
with a companion PHY IP.
allOf:
- $ref: ../bridge/synopsys,dw-hdmi.yaml#
- $ref: /schemas/sound/dai-common.yaml#
properties:
compatible:
enum:
- rockchip,rk3228-dw-hdmi
- rockchip,rk3288-dw-hdmi
- rockchip,rk3328-dw-hdmi
- rockchip,rk3399-dw-hdmi
- rockchip,rk3568-dw-hdmi
reg-io-width:
const: 4
avdd-0v9-supply:
description:
A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
HDMI_AVDD_1V0.
avdd-1v8-supply:
description:
A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
SoC usually is HDMI_TX_AVDD_1V8.
clocks:
minItems: 2
items:
- {}
- {}
# The next three clocks are all optional, but shall be specified in this
# order when present.
- description: The HDMI CEC controller main clock
- description: Power for GRF IO
- description: External clock for some HDMI PHY (old clock name, deprecated)
- description: External clock for some HDMI PHY (new name)
clock-names:
minItems: 2
items:
- {}
- {}
- enum:
- cec
- grf
- vpll
- ref
- enum:
- grf
- vpll
- ref
- enum:
- vpll
- ref
ddc-i2c-bus:
$ref: /schemas/types.yaml#/definitions/phandle
description:
The HDMI DDC bus can be connected to either a system I2C master or the
functionally-reduced I2C master contained in the DWC HDMI. When connected
to a system I2C master this property contains a phandle to that I2C
master controller.
phys:
maxItems: 1
description: The HDMI PHY
phy-names:
const: hdmi
pinctrl-names:
description:
The unwedge pinctrl entry shall drive the DDC SDA line low. This is
intended to work around a hardware errata that can cause the DDC I2C
bus to be wedged.
minItems: 1
items:
- const: default
- const: unwedge
power-domains:
maxItems: 1
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description: Input of the DWC HDMI TX
properties:
endpoint:
description: Connection to the VOP
endpoint@0:
description: Connection to the VOPB
endpoint@1:
description: Connection to the VOPL
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: Output of the DWC HDMI TX
required:
- port@0
- port@1
rockchip,grf:
$ref: /schemas/types.yaml#/definitions/phandle
description:
phandle to the GRF to mux vopl/vopb.
"#sound-dai-cells":
const: 0
required:
- compatible
- reg
- reg-io-width
- clocks
- clock-names
- interrupts
- ports
- rockchip,grf
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/rk3288-cru.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/rk3288-power.h>
hdmi: hdmi@ff980000 {
compatible = "rockchip,rk3288-dw-hdmi";
reg = <0xff980000 0x20000>;
reg-io-width = <4>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
clock-names = "iahb", "isfr";
ddc-i2c-bus = <&i2c5>;
power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
hdmi_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_hdmi>;
};
hdmi_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_hdmi>;
};
};
port@1 {
reg = <1>;
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
};
};
...
|
