| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For device memory TCP, we expect the skb headers to be available in host
memory for access, and we expect the skb frags to be in device memory
and unaccessible to the host. We expect there to be no mixing and
matching of device memory frags (unaccessible) with host memory frags
(accessible) in the same skb.
Add a skb->devmem flag which indicates whether the frags in this skb
are device memory frags or not.
__skb_fill_netmem_desc() now checks frags added to skbs for net_iov,
and marks the skb as skb->devmem accordingly.
Add checks through the network stack to avoid accessing the frags of
devmem skbs and avoid coalescing devmem skbs with non devmem skbs.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-9-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make skb_frag_page() fail in the case where the frag is not backed
by a page, and fix its relevant callers to handle this case.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an skb helper function to copy a range of bytes from within
an existing skb_seq_state.
Signed-off-by: Christian Hopps <chopps@labn.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch modifies the skb_unref function to skip the early return
optimization when CONFIG_DEBUG_NET is enabled. The change ensures that
the reference count decrement always occurs in debug builds, allowing
for more thorough checking of SKB reference counting.
Previously, when the SKB's reference count was 1 and CONFIG_DEBUG_NET
was not set, the function would return early after a memory barrier
(smp_rmb()) without decrementing the reference count. This optimization
assumes it's safe to proceed with freeing the SKB without the overhead
of an atomic decrement from 1 to 0.
With this change:
- In non-debug builds (CONFIG_DEBUG_NET not set), behavior remains
unchanged, preserving the performance optimization.
- In debug builds (CONFIG_DEBUG_NET set), the reference count is always
decremented, even when it's 1, allowing for consistent behavior and
potentially catching subtle SKB management bugs.
This modification enhances debugging capabilities for networking code
without impacting performance in production kernels. It helps kernel
developers identify and diagnose issues related to SKB management and
reference counting in the network stack.
Cc: Chris Mason <clm@fb.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240729104741.370327-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
A number of allocation helper functions were converted into macros to
account them at the call sites. Add a comment for each converted
allocation helper explaining why it has to be a macro and why we typecast
the return value wherever required. The patch also moves
acpi_os_acquire_object() closer to other allocation helpers to group them
together under the same comment. The patch has no functional changes.
Link: https://lkml.kernel.org/r/20240703174225.3891393-1-surenb@google.com
Fixes: 2c321f3f70bc ("mm: change inlined allocation helpers to account at the call site")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, io_uring's io_sg_from_iter() duplicates the part of
__zerocopy_sg_from_iter() charging pages to the socket. It'd be too easy
to miss while changing it in net/, the chunk is not the most
straightforward for outside users and full of internal implementation
details. io_uring is not a good place to keep it, deduplicate it by
moving out of the callback into __zerocopy_sg_from_iter().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Long used destructors kfree_skb and kfree_skb_reason do not pass
receiving socket to packet drop tracepoints trace_kfree_skb.
This makes it hard to track packet drops of a certain netns (container)
or a socket (user application).
The naming of these destructors are also not consistent with most sk/skb
operating functions, i.e. functions named "sk_xxx" or "skb_xxx".
Introduce a new functions sk_skb_reason_drop as drop-in replacement for
kfree_skb_reason on local receiving path. Callers can now pass receiving
sockets to the tracepoints.
kfree_skb and kfree_skb_reason are still usable but they are now just
inline helpers that call sk_skb_reason_drop.
Note it is not feasible to do the same to consume_skb. Packets not
dropped can flow through multiple receive handlers, and have multiple
receiving sockets. Leave it untouched for now.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to previous patch: apply same logic for
__skb_get_hash_symmetric and let callers pass the netns to the dissector
core.
Existing function is turned into a wrapper to avoid adjusting all
callers, nft_hash.c uses new function.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240608221057.16070-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Years ago flow dissector gained ability to delegate flow dissection
to a bpf program, scoped per netns.
Unfortunately, skb_get_hash() only gets an sk_buff argument instead
of both net+skb. This means the flow dissector needs to obtain the
netns pointer from somewhere else.
The netns is derived from skb->dev, and if that is not available, from
skb->sk. If neither is set, we hit a (benign) WARN_ON_ONCE().
Trying both dev and sk covers most cases, but not all, as recently
reported by Christoph Paasch.
In case of nf-generated tcp reset, both sk and dev are NULL:
WARNING: .. net/core/flow_dissector.c:1104
skb_flow_dissect_flow_keys include/linux/skbuff.h:1536 [inline]
skb_get_hash include/linux/skbuff.h:1578 [inline]
nft_trace_init+0x7d/0x120 net/netfilter/nf_tables_trace.c:320
nft_do_chain+0xb26/0xb90 net/netfilter/nf_tables_core.c:268
nft_do_chain_ipv4+0x7a/0xa0 net/netfilter/nft_chain_filter.c:23
nf_hook_slow+0x57/0x160 net/netfilter/core.c:626
__ip_local_out+0x21d/0x260 net/ipv4/ip_output.c:118
ip_local_out+0x26/0x1e0 net/ipv4/ip_output.c:127
nf_send_reset+0x58c/0x700 net/ipv4/netfilter/nf_reject_ipv4.c:308
nft_reject_ipv4_eval+0x53/0x90 net/ipv4/netfilter/nft_reject_ipv4.c:30
[..]
syzkaller did something like this:
table inet filter {
chain input {
type filter hook input priority filter; policy accept;
meta nftrace set 1
tcp dport 42 reject with tcp reset
}
chain output {
type filter hook output priority filter; policy accept;
# empty chain is enough
}
}
... then sends a tcp packet to port 42.
Initial attempt to simply set skb->dev from nf_reject_ipv4 doesn't cover
all cases: skbs generated via ipv4 igmp_send_report trigger similar splat.
Moreover, Pablo Neira found that nft_hash.c uses __skb_get_hash_symmetric()
which would trigger same warn splat for such skbs.
Lets allow callers to pass the current netns explicitly.
The nf_trace infrastructure is adjusted to use the new helper.
__skb_get_hash_symmetric is handled in the next patch.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/494
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240608221057.16070-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-28
We've added 23 non-merge commits during the last 11 day(s) which contain
a total of 45 files changed, 696 insertions(+), 277 deletions(-).
The main changes are:
1) Rename skb's mono_delivery_time to tstamp_type for extensibility
and add SKB_CLOCK_TAI type support to bpf_skb_set_tstamp(),
from Abhishek Chauhan.
2) Add netfilter CT zone ID and direction to bpf_ct_opts so that arbitrary
CT zones can be used from XDP/tc BPF netfilter CT helper functions,
from Brad Cowie.
3) Several tweaks to the instruction-set.rst IETF doc to address
the Last Call review comments, from Dave Thaler.
4) Small batch of riscv64 BPF JIT optimizations in order to emit more
compressed instructions to the JITed image for better icache efficiency,
from Xiao Wang.
5) Sort bpftool C dump output from BTF, aiming to simplify vmlinux.h
diffing and forcing more natural type definitions ordering,
from Mykyta Yatsenko.
6) Use DEV_STATS_INC() macro in BPF redirect helpers to silence
a syzbot/KCSAN race report for the tx_errors counter,
from Jiang Yunshui.
7) Un-constify bpf_func_info in bpftool to fix compilation with LLVM 17+
which started treating const structs as constants and thus breaking
full BTF program name resolution, from Ivan Babrou.
8) Fix up BPF program numbers in test_sockmap selftest in order to reduce
some of the test-internal array sizes, from Geliang Tang.
9) Small cleanup in Makefile.btf script to use test-ge check for v1.25-only
pahole, from Alan Maguire.
10) Fix bpftool's make dependencies for vmlinux.h in order to avoid needless
rebuilds in some corner cases, from Artem Savkov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
bpf, net: Use DEV_STAT_INC()
bpf, docs: Fix instruction.rst indentation
bpf, docs: Clarify call local offset
bpf, docs: Add table captions
bpf, docs: clarify sign extension of 64-bit use of 32-bit imm
bpf, docs: Use RFC 2119 language for ISA requirements
bpf, docs: Move sentence about returning R0 to abi.rst
bpf: constify member bpf_sysctl_kern:: Table
riscv, bpf: Try RVC for reg move within BPF_CMPXCHG JIT
riscv, bpf: Use STACK_ALIGN macro for size rounding up
riscv, bpf: Optimize zextw insn with Zba extension
selftests/bpf: Handle forwarding of UDP CLOCK_TAI packets
net: Add additional bit to support clockid_t timestamp type
net: Rename mono_delivery_time to tstamp_type for scalabilty
selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncs
net: netfilter: Make ct zone opts configurable for bpf ct helpers
selftests/bpf: Fix prog numbers in test_sockmap
bpf: Remove unused variable "prev_state"
bpftool: Un-const bpf_func_info to fix it for llvm 17 and newer
bpf: Fix order of args in call to bpf_map_kvcalloc
...
====================
Link: https://lore.kernel.org/r/20240528105924.30905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tstamp_type is now set based on actual clockid_t compressed
into 2 bits.
To make the design scalable for future needs this commit bring in
the change to extend the tstamp_type:1 to tstamp_type:2 to support
other clockid_t timestamp.
We now support CLOCK_TAI as part of tstamp_type as part of this
commit with existing support CLOCK_MONOTONIC and CLOCK_REALTIME.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509211834.3235191-3-quic_abchauha@quicinc.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
mono_delivery_time was added to check if skb->tstamp has delivery
time in mono clock base (i.e. EDT) otherwise skb->tstamp has
timestamp in ingress and delivery_time at egress.
Renaming the bitfield from mono_delivery_time to tstamp_type is for
extensibilty for other timestamps such as userspace timestamp
(i.e. SO_TXTIME) set via sock opts.
As we are renaming the mono_delivery_time to tstamp_type, it makes
sense to start assigning tstamp_type based on enum defined
in this commit.
Earlier we used bool arg flag to check if the tstamp is mono in
function skb_set_delivery_time, Now the signature of the functions
accepts tstamp_type to distinguish between mono and real time.
Also skb_set_delivery_type_by_clockid is a new function which accepts
clockid to determine the tstamp_type.
In future tstamp_type:1 can be extended to support userspace timestamp
by increasing the bitfield.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509211834.3235191-2-quic_abchauha@quicinc.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sysctl_max_skb_frags is used in TCP and MPTCP fast paths,
move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I added dst_rt6_info() in commit
e8dfd42c17fa ("ipv6: introduce dst_rt6_info() helper")
This patch does a similar change for IPv4.
Instead of (struct rtable *)dst casts, we can use :
#define dst_rtable(_ptr) \
container_of_const(_ptr, struct rtable, dst)
Patch is smaller than IPv6 one, because IPv4 has skb_rtable() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240429133009.1227754-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev. This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags. Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.
The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.
Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO. The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.
Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Main goal of memory allocation profiling patchset is to provide accounting
that is cheap enough to run in production. To achieve that we inject
counters using codetags at the allocation call sites to account every time
allocation is made. This injection allows us to perform accounting
efficiently because injected counters are immediately available as opposed
to the alternative methods, such as using _RET_IP_, which would require
counter lookup and appropriate locking that makes accounting much more
expensive. This method requires all allocation functions to inject
separate counters at their call sites so that their callers can be
individually accounted. Counter injection is implemented by allocation
hooks which should wrap all allocation functions.
Inlined functions which perform allocations but do not use allocation
hooks are directly charged for the allocations they perform. In most
cases these functions are just specialized allocation wrappers used from
multiple places to allocate objects of a specific type. It would be more
useful to do the accounting at their call sites instead. Instrument these
helpers to do accounting at the call site. Simple inlined allocation
wrappers are converted directly into macros. More complex allocators or
allocators with documentation are converted into _noprof versions and
allocation hooks are added. This allows memory allocation profiling
mechanism to charge allocations to the callers of these functions.
Link: https://lkml.kernel.org/r/20240415020731.1152108-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Jan Kara <jack@suse.cz> [jbd2]
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pavel Begunkov says:
====================
implement io_uring notification (ubuf_info) stacking (net part)
To have per request buffer notifications each zerocopy io_uring send
request allocates a new ubuf_info. However, as an skb can carry only
one uarg, it may force the stack to create many small skbs hurting
performance in many ways.
The patchset implements notification, i.e. an io_uring's ubuf_info
extension, stacking. It attempts to link ubuf_info's into a list,
allowing to have multiple of them per skb.
liburing/examples/send-zerocopy shows up 6 times performance improvement
for TCP with 4KB bytes per send, and levels it with MSG_ZEROCOPY. Without
the patchset it requires much larger sends to utilise all potential.
bytes | before | after (Kqps)
1200 | 195 | 1023
4000 | 193 | 1386
8000 | 154 | 1058
====================
Link: https://lore.kernel.org/all/cover.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the moment an skb can only have one ubuf_info associated with it,
which might be a performance problem for zerocopy sends in cases like
TCP via io_uring. Add a callback for assigning ubuf_info to skb, this
way we will implement smarter assignment later like linking ubuf_info
together.
Note, it's an optional callback, which should be compatible with
skb_zcopy_set(), that's because the net stack might potentially decide
to clone an skb and take another reference to ubuf_info whenever it
wishes. Also, a correct implementation should always be able to bind to
an skb without prior ubuf_info, otherwise we could end up in a situation
when the send would not be able to progress.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/b7918aadffeb787c84c9e72e34c729dc04f3a45d.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll need to associate additional callbacks with ubuf_info, introduce
a structure holding ubuf_info callbacks. Apart from a more smarter
io_uring notification management introduced in next patches, it can be
used to generalise msg_zerocopy_put_abort() and also store
->sg_from_iter, which is currently passed in struct msghdr.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/a62015541de49c0e2a8a0377a1d5d0a5aeb07016.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new header, linux/skbuff_ref.h, which contains all the skb_*_ref()
helpers. Many of the consumers of skbuff.h do not actually use any of
the skb ref helpers, and we can speed up compilation a bit by minimizing
this header file.
Additionally in the later patch in the series we add page_pool support
to skb_frag_ref(), which requires some page_pool dependencies. We can
now add these dependencies to skbuff_ref.h instead of a very ubiquitous
skbuff.h
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20240410190505.1225848-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the changes in the last patches, napi_frag_unref() is now
reduandant. Remove it and use skb_page_unref directly.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240408153000.2152844-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The implementations of these 2 functions are almost identical. Remove
the implementation of napi_frag_unref, and make it a call into
skb_page_unref so we don't duplicate the implementation.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240408153000.2152844-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ->decrypted bit can be reused for other crypto protocols.
Remove the direct dependency on TLS, add helpers to clean up
the ifdefs leaking out everywhere.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since we have pool->p.napi (Jakub) and pool->cpuid (Lorenzo) to check
whether it's safe to use direct recycling, we can use both globally for
each page instead of relying solely on @allow_direct argument.
Let's assume that @allow_direct means "I'm sure it's local, don't waste
time rechecking this" and when it's false, try the mentioned params to
still recycle the page directly. If neither is true, we'll lose some
CPU cycles, but then it surely won't be hotpath. On the other hand,
paths where it's possible to use direct cache, but not possible to
safely set @allow_direct, will benefit from this move.
The whole propagation of @napi_safe through a dozen of skb freeing
functions can now go away, which saves us some stack space.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240329165507.3240110-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__napi_alloc_skb() is napi_alloc_skb() with the added flexibility
of choosing gfp_mask. This is a NAPI function, so GFP_ATOMIC is
implied. The only practical choice the caller has is whether to
set __GFP_NOWARN. But that's a false choice, too, allocation failures
in atomic context will happen, and printing warnings in logs,
effectively for a packet drop, is both too much and very likely
non-actionable.
This leads me to a conclusion that most uses of napi_alloc_skb()
are simply misguided, and should use __GFP_NOWARN in the first
place. We also have a "standard" way of reporting allocation
failures via the queue stat API (qstats::rx-alloc-fail).
The direct motivation for this patch is that one of the drivers
used at Meta calls napi_alloc_skb() (so prior to this patch without
__GFP_NOWARN), and the resulting OOM warning is the top networking
warning in our fleet.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240327040213.3153864-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize.
Fixes: 7026b1ddb6b8 ("netfilter: Pass socket pointer down through okfn().")
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Last user of skb_free_datagram_locked() went away in 2016
with commit 850cbaddb52d ("udp: use it's own memory
accounting schema").
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240325134155.620531-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-03-19
1) Fix possible page_pool leak triggered by esp_output.
From Dragos Tatulea.
2) Fix UDP encapsulation in software GSO path.
From Leon Romanovsky.
* tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Allow UDP encapsulation only in offload modes
net: esp: fix bad handling of pages from page_pool
====================
Link: https://lore.kernel.org/r/20240319110151.409825-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 885c36e59f46375c138de18ff1692f18eff67b7f.
The patch currently broke the bpf selftest test_tc_dtime because
uapi field __sk_buff->tstamp_type depends on skb->mono_delivery_time which
does not necessarily mean mono with the original fix as the bit was re-used
for userspace timestamp as well to avoid tstamp reset in the forwarding
path. To solve this we need to keep mono_delivery_time as is and
introduce another bit called user_delivery_time and fall back to the
initial proposal of setting the user_delivery_time bit based on
sk_clockid set from userspace.
Fixes: 885c36e59f46 ("net: Re-use and set mono_delivery_time bit for userspace tstamp packets")
Link: https://lore.kernel.org/netdev/bc037db4-58bb-4861-ac31-a361a93841d3@linux.dev/
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the skb is reorganized during esp_output (!esp->inline), the pages
coming from the original skb fragments are supposed to be released back
to the system through put_page. But if the skb fragment pages are
originating from a page_pool, calling put_page on them will trigger a
page_pool leak which will eventually result in a crash.
This leak can be easily observed when using CONFIG_DEBUG_VM and doing
ipsec + gre (non offloaded) forwarding:
BUG: Bad page state in process ksoftirqd/16 pfn:1451b6
page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6
flags: 0x200000000000000(node=0|zone=2)
page_type: 0xffffffff()
raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000
raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000
page dumped because: page_pool leak
Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core]
CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
bad_page+0x70/0xf0
free_unref_page_prepare+0x27a/0x460
free_unref_page+0x38/0x120
esp_ssg_unref.isra.0+0x15f/0x200
esp_output_tail+0x66d/0x780
esp_xmit+0x2c5/0x360
validate_xmit_xfrm+0x313/0x370
? validate_xmit_skb+0x1d/0x330
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x23e/0x350
__dev_queue_xmit+0x337/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x25e/0x580
iptunnel_xmit+0x19b/0x240
ip_tunnel_xmit+0x5fb/0xb60
ipgre_xmit+0x14d/0x280 [ip_gre]
dev_hard_start_xmit+0xc3/0x1c0
__dev_queue_xmit+0x208/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x1ca/0x580
ip_sublist_rcv_finish+0x32/0x40
ip_sublist_rcv+0x1b2/0x1f0
? ip_rcv_finish_core.constprop.0+0x460/0x460
ip_list_rcv+0x103/0x130
__netif_receive_skb_list_core+0x181/0x1e0
netif_receive_skb_list_internal+0x1b3/0x2c0
napi_gro_receive+0xc8/0x200
gro_cell_poll+0x52/0x90
__napi_poll+0x25/0x1a0
net_rx_action+0x28e/0x300
__do_softirq+0xc3/0x276
? sort_range+0x20/0x20
run_ksoftirqd+0x1e/0x30
smpboot_thread_fn+0xa6/0x130
kthread+0xcd/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x31/0x50
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
The suggested fix is to introduce a new wrapper (skb_page_unref) that
covers page refcounting for page_pool pages as well.
Cc: stable@vger.kernel.org
Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling")
Reported-and-tested-by: Anatoli N.Chechelnickiy <Anatoli.Chechelnickiy@m.interpipe.biz>
Reported-by: Ian Kumlien <ian.kumlien@gmail.com>
Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Similar to skb_unref(), add skb_data_unref() to save an expensive
atomic operation (and cache line dirtying) when last reference
on shinfo->dataref is released.
I saw this opportunity on hosts with RAW sockets accidentally
bound to UDP protocol, forcing an skb_clone() on all received packets.
These RAW sockets had their receive queue full, so all clone
packets were immediately dropped.
When UDP recvmsg() consumes later the original skb, skb_release_data()
is hitting atomic_sub_return() quite badly, because skb->clone
has been set permanently.
Note that this patch helps TCP TX performance, because
TCP stack also use (fast) clones.
This means that at least one of the two packets (the main skb or
its clone) will no longer have to perform this atomic operation
in skb_release_data().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240307123446.2302230-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skbuff_cache, skbuff_fclone_cache and skb_small_head_cache
are used in rx/tx fast paths.
Move them to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bridge driver today has no support to forward the userspace timestamp
packets and ends up resetting the timestamp. ETF qdisc checks the
packet coming from userspace and encounters to be 0 thereby dropping
time sensitive packets. These changes will allow userspace timestamps
packets to be forwarded from the bridge to NIC drivers.
Setting the same bit (mono_delivery_time) to avoid dropping of
userspace tstamp packets in the forwarding path.
Existing functionality of mono_delivery_time remains unaltered here,
instead just extended with userspace tstamp support for bridge
forwarding path.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240301201348.2815102-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
(skb_transport_header(skb) - skb_network_header(skb))
can be replaced by skb_network_header_len(skb)
Add a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len()
to catch cases were the transport_header was not set.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mpls_gso_segment() assumes skb_inner_network_header() returns
a valid result:
mpls_hlen = skb_inner_network_header(skb) - skb_network_header(skb);
if (unlikely(!mpls_hlen || mpls_hlen % MPLS_HLEN))
goto out;
if (unlikely(!pskb_may_pull(skb, mpls_hlen)))
With syzbot reproducer, skb_inner_network_header() yields 0,
skb_network_header() returns 108, so this will
"pskb_may_pull(skb, -108)))" which triggers a newly added
DEBUG_NET_WARN_ON_ONCE() check:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 pskb_may_pull_reason include/linux/skbuff.h:2723 [inline]
WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 pskb_may_pull include/linux/skbuff.h:2739 [inline]
WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 mpls_gso_segment+0x773/0xaa0 net/mpls/mpls_gso.c:34
[..]
skb_mac_gso_segment+0x383/0x740 net/core/gso.c:53
nsh_gso_segment+0x40a/0xad0 net/nsh/nsh.c:108
skb_mac_gso_segment+0x383/0x740 net/core/gso.c:53
__skb_gso_segment+0x324/0x4c0 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
[..]
sch_direct_xmit+0x11a/0x5f0 net/sched/sch_generic.c:327
[..]
packet_sendmsg+0x46a9/0x6130 net/packet/af_packet.c:3113
[..]
First iteration of this patch made mpls_hlen signed and changed
test to error out to "mpls_hlen <= 0 || ..".
Eric Dumazet said:
> I was thinking about adding a debug check in skb_inner_network_header()
> if inner_network_header is zero (that would mean it is not 'set' yet),
> but this would trigger even after your patch.
So add new skb_inner_network_header_was_set() helper and use that.
The syzbot reproducer injects data via packet socket. The skb that gets
allocated and passed down the stack has ->protocol set to NSH (0x894f)
and gso_type set to SKB_GSO_UDP | SKB_GSO_DODGY.
This gets passed to skb_mac_gso_segment(), which sees NSH as ptype to
find a callback for. nsh_gso_segment() retrieves next type:
proto = tun_p_to_eth_p(nsh_hdr(skb)->np);
... which is MPLS (TUN_P_MPLS_UC). It updates skb->protocol and then
calls mpls_gso_segment(). Inner offsets are all 0, so mpls_gso_segment()
ends up with a negative header size.
In case more callers rely on silent handling of such large may_pull values
we could also 'legalize' this behaviour, either replacing the debug check
with (len > INT_MAX) test or removing it and instead adding a comment
before existing
if (unlikely(len > skb->len))
return SKB_DROP_REASON_PKT_TOO_SMALL;
test in pskb_may_pull_reason(), saying that this check also implicitly
takes care of callers that miscompute header sizes.
Cc: Simon Horman <horms@kernel.org>
Fixes: 219eee9c0d16 ("net: skbuff: add overflow debug check to pull/push helpers")
Reported-by: syzbot+99d15fcdb0132a1e1a82@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/00000000000043b1310611e388aa@google.com/raw
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240222140321.14080-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot managed to trigger following splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x4a3b/0x5e50
Read of size 1 at addr ffff888208a4000e by task a.out/2313
[..]
__skb_flow_dissect+0x4a3b/0x5e50
__skb_get_hash+0xb4/0x400
ip_tunnel_xmit+0x77e/0x26f0
ipip_tunnel_xmit+0x298/0x410
..
Analysis shows that the skb has a valid ->head, but bogus ->data
pointer.
skb->data gets its bogus value via the neigh layer, which does:
1556 __skb_pull(skb, skb_network_offset(skb));
... and the skb was already dodgy at this point:
skb_network_offset(skb) returns a negative value due to an
earlier overflow of skb->network_header (u16). __skb_pull thus
"adjusts" skb->data by a huge offset, pointing outside skb->head
area.
Allow debug builds to splat when we try to pull/push more than
INT_MAX bytes.
After this, the syzkaller reproducer yields a more precise splat
before the flow dissector attempts to read off skb->data memory:
WARNING: CPU: 5 PID: 2313 at include/linux/skbuff.h:2653 neigh_connected_output+0x28e/0x400
ip_finish_output2+0xb25/0xed0
iptunnel_xmit+0x4ff/0x870
ipgre_xmit+0x78e/0xbb0
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240216113700.23013-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use struct netmem* instead of page in skb_frag_t. Currently struct
netmem* is always a struct page underneath, but the abstraction
allows efforts to add support for skb frags not backed by pages.
There is unfortunately 1 instance where the skb_frag_t is assumed to be
a exactly a bio_vec in kcm. For this case, WARN_ON_ONCE and return error
before doing a cast.
Add skb[_frag]_fill_netmem_*() and skb_add_rx_frag_netmem() helpers so
that the API can be used to create netmem skbs.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rely on skb_pp_cow_data utility routine and remove duplicated code.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/029cc14cce41cb242ee7efdcf32acc81f1ce4e9f.1707729884.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to native xdp, do not always linearize the skb in
netif_receive_generic_xdp routine but create a non-linear xdp_buff to be
processed by the eBPF program. This allow to add multi-buffer support
for xdp running in generic mode.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/1044d6412b1c3e95b40d34993fd5f37cd2f319fd.1707729884.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An skb can be added to a neigh->arp_queue while waiting for an arp
reply. Where original skb's skb->dev can be different to neigh's
neigh->dev. For instance in case of bridging dnated skb from one veth to
another, the skb would be added to a neigh->arp_queue of the bridge.
As skb->dev can be reset back to nf_bridge->physindev and used, and as
there is no explicit mechanism that prevents this physindev from been
freed under us (for instance neigh_flush_dev doesn't cleanup skbs from
different device's neigh queue) we can crash on e.g. this stack:
arp_process
neigh_update
skb = __skb_dequeue(&neigh->arp_queue)
neigh_resolve_output(..., skb)
...
br_nf_dev_xmit
br_nf_pre_routing_finish_bridge_slow
skb->dev = nf_bridge->physindev
br_handle_frame_finish
Let's use plain ifindex instead of net_device link. To peek into the
original net_device we will use dev_get_by_index_rcu(). Thus either we
get device and are safe to use it or we don't get it and drop skb.
Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to
skbuff.c to use it as helper.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove documentation for nonexistent structure members, addressing these
warnings:
./include/linux/skbuff.h:1063: warning: Excess struct member 'sp' description in 'sk_buff'
./include/linux/skbuff.h:1063: warning: Excess struct member 'nf_bridge' description in 'sk_buff'
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling as reported by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231213043511.10357-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
32 bytes may be not enough for some custom metadata. Relax the restriction,
allow metadata larger than 32 bytes and make __skb_metadata_differs() work
with bigger lengths.
Now size of metadata is only limited by the fact it is stored as u8 in
skb_shared_info, so maximum possible value is 255. Size still has to be
aligned to 4, so the actual upper limit becomes 252. Most driver
implementations will offer less, none can offer more.
Other important conditions, such as having enough space for xdp_frame
building, are already checked in bpf_xdp_adjust_meta().
Signed-off-by: Aleksander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/eb87653c-8ff8-447d-a7a1-25961f60518a@kernel.org
Link: https://lore.kernel.org/bpf/20231206205919.404415-3-larysa.zaremba@intel.com
|
