summaryrefslogtreecommitdiff
path: root/fs/ext4/ext4_jbd2.c
AgeCommit message (Collapse)AuthorFilesLines
2024-05-03use ->bd_mapping instead of ->bd_inode->i_mappingAl Viro1-1/+1
Just the low-hanging fruit... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20240411145346.2516848-2-viro@zeniv.linux.org.uk Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-01-04ext4: move ext4_check_bdev_write_error() into nojournal modeZhihao Cheng1-3/+2
Since JBD2 takes care of all metadata writeback errors of fs dev, ext4_check_bdev_write_error() is useful only in nojournal mode. Move it into '!ext4_handle_valid(handle)' branch. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20231213013224.2100050-6-chengzhihao1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-31Merge tag 'ext4_for_linus-6.6-rc1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Many ext4 and jbd2 cleanups and bug fixes: - Cleanups in the ext4 remount code when going to and from read-only - Cleanups in ext4's multiblock allocator - Cleanups in the jbd2 setup/mounting code paths - Performance improvements when appending to a delayed allocation file - Miscellaneous syzbot and other bug fixes" * tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits) ext4: fix slab-use-after-free in ext4_es_insert_extent() libfs: remove redundant checks of s_encoding ext4: remove redundant checks of s_encoding ext4: reject casefold inode flag without casefold feature ext4: use LIST_HEAD() to initialize the list_head in mballoc.c ext4: do not mark inode dirty every time when appending using delalloc ext4: rename s_error_work to s_sb_upd_work ext4: add periodic superblock update check ext4: drop dio overwrite only flag and associated warning ext4: add correct group descriptors and reserved GDT blocks to system zone ext4: remove unused function declaration ext4: mballoc: avoid garbage value from err ext4: use sbi instead of EXT4_SB(sb) in ext4_mb_new_blocks_simple() ext4: change the type of blocksize in ext4_mb_init_cache() ext4: fix unttached inode after power cut with orphan file feature enabled jbd2: correct the end of the journal recovery scan range ext4: ext4_get_{dev}_journal return proper error value ext4: cleanup ext4_get_dev_journal() and ext4_get_journal() jbd2: jbd2_journal_init_{dev,inode} return proper error return value jbd2: drop useless error tag in jbd2_journal_wipe() ...
2023-08-09ext4: don't use bdev->bd_super in __ext4_journal_get_write_accessChristoph Hellwig1-2/+1
__ext4_journal_get_write_access already has a super_block available, and there is no need to go from that to the bdev to go back to the owning super_block. Signed-off-by: Christoph Hellwig <hch@lst.de> Message-Id: <20230807112625.652089-3-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-07-29ext4: warn on read-only filesystem in ext4_journal_check_start()Jan Kara1-1/+2
Now that filesystem abort marks the filesystem as shutdown, we shouldn't be ever hitting the sb_rdonly() check in ext4_journal_check_start(). Since this is a suitable place for catching all sorts of programming errors, convert the check to WARN_ON instead of dropping it. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230616165109.21695-7-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-29ext4: make ext4_forced_shutdown() take struct super_blockJan Kara1-1/+1
Currently ext4_forced_shutdown() takes struct ext4_sb_info but most callers need to get it from struct super_block anyway. So just pass in struct super_block to save all callers from some boilerplate code. No functional changes. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230616165109.21695-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-12-01ext4: split ext4_journal_start trace for debugchangfengnan1-4/+10
we might want to know why jbd2 thread using high io for detail, split ext4_journal_start trace to ext4_journal_start_sb and ext4_journal_start_inode, show ino and handle type when possible. Signed-off-by: changfengnan <changfengnan@bytedance.com> Link: https://lore.kernel.org/r/20221008120518.74870-1-changfengnan@bytedance.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02ext4: use ext4_debug() instead of jbd_debug()Jan Kara1-2/+1
We use jbd_debug() in some places in ext4. It seems a bit strange to use jbd2 debugging output function for ext4 code. Also these days ext4_debug() uses dynamic printk so each debug message can be enabled / disabled on its own so the time when it made some sense to have these combined (to allow easier common selecting of messages to report) has passed. Just convert all jbd_debug() uses in ext4 to ext4_debug(). Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/20220608112355.4397-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-01-10ext4: fix null-ptr-deref in '__ext4_journal_ensure_credits'Ye Bin1-0/+2
We got issue as follows when run syzkaller test: [ 1901.130043] EXT4-fs error (device vda): ext4_remount:5624: comm syz-executor.5: Abort forced by user [ 1901.130901] Aborting journal on device vda-8. [ 1901.131437] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.16: Detected aborted journal [ 1901.131566] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.11: Detected aborted journal [ 1901.132586] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.18: Detected aborted journal [ 1901.132751] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.9: Detected aborted journal [ 1901.136149] EXT4-fs error (device vda) in ext4_reserve_inode_write:6035: Journal has aborted [ 1901.136837] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-fuzzer: Detected aborted journal [ 1901.136915] ================================================================== [ 1901.138175] BUG: KASAN: null-ptr-deref in __ext4_journal_ensure_credits+0x74/0x140 [ext4] [ 1901.138343] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.13: Detected aborted journal [ 1901.138398] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.1: Detected aborted journal [ 1901.138808] Read of size 8 at addr 0000000000000000 by task syz-executor.17/968 [ 1901.138817] [ 1901.138852] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.30: Detected aborted journal [ 1901.144779] CPU: 1 PID: 968 Comm: syz-executor.17 Not tainted 4.19.90-vhulk2111.1.0.h893.eulerosv2r10.aarch64+ #1 [ 1901.146479] Hardware name: linux,dummy-virt (DT) [ 1901.147317] Call trace: [ 1901.147552] dump_backtrace+0x0/0x2d8 [ 1901.147898] show_stack+0x28/0x38 [ 1901.148215] dump_stack+0xec/0x15c [ 1901.148746] kasan_report+0x108/0x338 [ 1901.149207] __asan_load8+0x58/0xb0 [ 1901.149753] __ext4_journal_ensure_credits+0x74/0x140 [ext4] [ 1901.150579] ext4_xattr_delete_inode+0xe4/0x700 [ext4] [ 1901.151316] ext4_evict_inode+0x524/0xba8 [ext4] [ 1901.151985] evict+0x1a4/0x378 [ 1901.152353] iput+0x310/0x428 [ 1901.152733] do_unlinkat+0x260/0x428 [ 1901.153056] __arm64_sys_unlinkat+0x6c/0xc0 [ 1901.153455] el0_svc_common+0xc8/0x320 [ 1901.153799] el0_svc_handler+0xf8/0x160 [ 1901.154265] el0_svc+0x10/0x218 [ 1901.154682] ================================================================== This issue may happens like this: Process1 Process2 ext4_evict_inode ext4_journal_start ext4_truncate ext4_ind_truncate ext4_free_branches ext4_ind_truncate_ensure_credits ext4_journal_ensure_credits_fn ext4_journal_restart handle->h_transaction = NULL; mount -o remount,abort /mnt -> trigger JBD abort start_this_handle -> will return failed ext4_xattr_delete_inode ext4_journal_ensure_credits ext4_journal_ensure_credits_fn __ext4_journal_ensure_credits jbd2_handle_buffer_credits journal = handle->h_transaction->t_journal; ->null-ptr-deref Now, indirect truncate process didn't handle error. To solve this issue maybe simply add check handle is abort in '__ext4_journal_ensure_credits' is enough, and i also think this is necessary. Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20211224100341.3299128-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-30ext4: Support for checksumming from journal triggersJan Kara1-12/+31
JBD2 layer support triggers which are called when journaling layer moves buffer to a certain state. We can use the frozen trigger, which gets called when buffer data is frozen and about to be written out to the journal, to compute block checksums for some buffer types (similarly as does ocfs2). This avoids unnecessary repeated recomputation of the checksum (at the cost of larger window where memory corruption won't be caught by checksumming) and is even necessary when there are unsynchronized updaters of the checksummed data. So add superblock and journal trigger type arguments to ext4_journal_get_write_access() and ext4_journal_get_create_access() so that frozen triggers can be set accordingly. Also add inode argument to ext4_walk_page_buffers() and all the callbacks used with that function for the same purpose. This patch is mostly only a change of prototype of the above mentioned functions and a few small helpers. Real checksumming will come later. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-07-23ext4: remove conflicting comment from __ext4_forgetGuoqing Jiang1-3/+0
We do a bforget and return for no journal case, so let's remove this conflict comment. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn> Link: https://lore.kernel.org/r/20210714055940.1553705-1-guoqing.jiang@linux.dev Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-07-01ext4: fix WARN_ON_ONCE(!buffer_uptodate) after an error writing the superblockYe Bin1-1/+1
If a writeback of the superblock fails with an I/O error, the buffer is marked not uptodate. However, this can cause a WARN_ON to trigger when we attempt to write superblock a second time. (Which might succeed this time, for cerrtain types of block devices such as iSCSI devices over a flaky network.) Try to detect this case in flush_stashed_error_work(), and also change __ext4_handle_dirty_metadata() so we always set the uptodate flag, not just in the nojournal case. Before this commit, this problem can be repliciated via: 1. dmsetup create dust1 --table '0 2097152 dust /dev/sdc 0 4096' 2. mount /dev/mapper/dust1 /home/test 3. dmsetup message dust1 0 addbadblock 0 10 4. cd /home/test 5. echo "XXXXXXX" > t After a few seconds, we got following warning: [ 80.654487] end_buffer_async_write: bh=0xffff88842f18bdd0 [ 80.656134] Buffer I/O error on dev dm-0, logical block 0, lost async page write [ 85.774450] EXT4-fs error (device dm-0): ext4_check_bdev_write_error:193: comm kworker/u16:8: Error while async write back metadata [ 91.415513] mark_buffer_dirty: bh=0xffff88842f18bdd0 [ 91.417038] ------------[ cut here ]------------ [ 91.418450] WARNING: CPU: 1 PID: 1944 at fs/buffer.c:1092 mark_buffer_dirty.cold+0x1c/0x5e [ 91.440322] Call Trace: [ 91.440652] __jbd2_journal_temp_unlink_buffer+0x135/0x220 [ 91.441354] __jbd2_journal_unfile_buffer+0x24/0x90 [ 91.441981] __jbd2_journal_refile_buffer+0x134/0x1d0 [ 91.442628] jbd2_journal_commit_transaction+0x249a/0x3240 [ 91.443336] ? put_prev_entity+0x2a/0x200 [ 91.443856] ? kjournald2+0x12e/0x510 [ 91.444324] kjournald2+0x12e/0x510 [ 91.444773] ? woken_wake_function+0x30/0x30 [ 91.445326] kthread+0x150/0x1b0 [ 91.445739] ? commit_timeout+0x20/0x20 [ 91.446258] ? kthread_flush_worker+0xb0/0xb0 [ 91.446818] ret_from_fork+0x1f/0x30 [ 91.447293] ---[ end trace 66f0b6bf3d1abade ]--- Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210615090537.3423231-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-22ext4: drop ext4_handle_dirty_super()Jan Kara1-16/+0
The wrapper is now useless since it does what ext4_handle_dirty_metadata() does. Just remove it. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201216101844.22917-9-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-22ext4: protect superblock modifications with a buffer lockJan Kara1-1/+0
Protect all superblock modifications (including checksum computation) with a superblock buffer lock. That way we are sure computed checksum matches current superblock contents (a mismatch could cause checksum failures in nojournal mode or if an unjournalled superblock update races with a journalled one). Also we avoid modifying superblock contents while it is being written out (which can cause DIF/DIX failures if we are running in nojournal mode). Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201216101844.22917-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: make ext4_abort() use __ext4_error()Jan Kara1-2/+2
The only difference between __ext4_abort() and __ext4_error() is that the former one ignores errors=continue mount option. Unify the code to reduce duplication. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-5-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4: fast commit recovery pathHarshad Shirwadkar1-1/+1
This patch adds fast commit recovery path support for Ext4 file system. We add several helper functions that are similar in spirit to e2fsprogs journal recovery path handlers. Example of such functions include - a simple block allocator, idempotent block bitmap update function etc. Using these routines and the fast commit log in the fast commit area, the recovery path (ext4_fc_replay()) performs fast commit log recovery. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-07ext4: abort the filesystem if failed to async write metadata bufferzhangyi (F)1-0/+25
There is a risk of filesystem inconsistency if we failed to async write back metadata buffer in the background. Because of current buffer's end io procedure is handled by end_buffer_async_write() in the block layer, and it only clear the buffer's uptodate flag and mark the write_io_error flag, so ext4 cannot detect such failure immediately. In most cases of getting metadata buffer (e.g. ext4_read_inode_bitmap()), although the buffer's data is actually uptodate, it may still read data from disk because the buffer's uptodate flag has been cleared. Finally, it may lead to on-disk filesystem inconsistency if reading old data from the disk successfully and write them out again. This patch detect bdev mapping->wb_err when getting journal's write access and mark the filesystem error if bdev's mapping->wb_err was increased, this could prevent further writing and potential inconsistency. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200620025427.1756360-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-04-15ext4: remove set but not used variable 'es' in ext4_jbd2.cJason Yan1-3/+0
Fix the following gcc warning: fs/ext4/ext4_jbd2.c:341:30: warning: variable 'es' set but not used [-Wunused-but-set-variable] struct ext4_super_block *es; ^~ Fixes: 2ea2fc775321 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200402034759.29957-1-yanaijie@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-04-01ext4: save all error info in save_error_info() and drop ext4_set_errno()Theodore Ts'o1-9/+4
Using a separate function, ext4_set_errno() to set the errno is problematic because it doesn't do the right thing once s_last_error_errorcode is non-zero. It's also less racy to set all of the error information all at once. (Also, as a bonus, it shrinks code size slightly.) Link: https://lore.kernel.org/r/20200329020404.686965-1-tytso@mit.edu Fixes: 878520ac45f9 ("ext4: save the error code which triggered...") Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-05ext4: force buffer up-to-date while marking it dirtyHarshad Shirwadkar1-0/+1
Writeback errors can leave buffer in not up-to-date state when there are errors during background writes. Force buffer up-to-date while marking it dirty. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20191224190940.157952-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-17ext4: uninline ext4_inode_journal_mode()Eric Biggers1-0/+22
Determining an inode's journaling mode has gotten more complicated over time. Move ext4_inode_journal_mode() from an inline function into ext4_jbd2.c to reduce the compiled code size. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20191209233602.117778-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-12-26ext4: save the error code which triggered an ext4_error() in the superblockTheodore Ts'o1-0/+3
This allows the cause of an ext4_error() report to be categorized based on whether it was triggered due to an I/O error, or an memory allocation error, or other possible causes. Most errors are caused by a detected file system inconsistency, so the default code stored in the superblock will be EXT4_ERR_EFSCORRUPTED. Link: https://lore.kernel.org/r/20191204032335.7683-1-tytso@mit.edu Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05ext4: Reserve revoke credits for freed blocksJan Kara1-8/+12
So far we have reserved only relatively high fixed amount of revoke credits for each transaction. We over-reserved by large amount for most cases but when freeing large directories or files with data journalling, the fixed amount is not enough. In fact the worst case estimate is inconveniently large (maximum extent size) for freeing of one extent. We fix this by doing proper estimate of the amount of blocks that need to be revoked when removing blocks from the inode due to truncate or hole punching and otherwise reserve just a small amount of revoke credits for each transaction to accommodate freeing of xattrs block or so. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-23-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05jbd2: Reserve space for revoke descriptor blocksJan Kara1-1/+1
Extend functions for starting, extending, and restarting transaction handles to take number of revoke records handle must be able to accommodate. These functions then make sure transaction has enough credits to be able to store resulting revoke descriptor blocks. Also revoke code tracks number of revoke records created by a handle to catch situation where some place didn't reserve enough space for revoke records. Similarly to standard transaction credits, space for unused reserved revoke records is released when the handle is stopped. On the ext4 side we currently take a simplistic approach of reserving space for 1024 revoke records for any transaction. This grows amount of credits reserved for each handle only by a few and is enough for any normal workload so that we don't hit warnings in jbd2. We will refine the logic in following commits. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-20-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05ext4, jbd2: Provide accessor function for handle creditsJan Kara1-6/+7
Provide accessor function to get number of credits available in a handle and use it from ext4. Later, computation of available credits won't be so straightforward. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-11-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05ext4: Provide function to handle transaction restartsJan Kara1-0/+11
Provide ext4_journal_ensure_credits_fn() function to ensure transaction has given amount of credits and call helper function to prepare for restarting a transaction. This allows to remove some boilerplate code from various places, add proper error handling for the case where transaction extension or restart fails, and reduces following changes needed for proper revoke record reservation tracking. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-10-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-02-18ext4: shutdown should not prevent get_write_accessTheodore Ts'o1-7/+0
The ext4 forced shutdown flag needs to prevent new handles from being started, but it needs to allow existing handles to complete. So the forced shutdown flag should not force ext4_journal_get_write_access to fail. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)David Howells1-1/+1
Firstly by applying the following with coccinelle's spatch: @@ expression SB; @@ -SB->s_flags & MS_RDONLY +sb_rdonly(SB) to effect the conversion to sb_rdonly(sb), then by applying: @@ expression A, SB; @@ ( -(!sb_rdonly(SB)) && A +!sb_rdonly(SB) && A | -A != (sb_rdonly(SB)) +A != sb_rdonly(SB) | -A == (sb_rdonly(SB)) +A == sb_rdonly(SB) | -!(sb_rdonly(SB)) +!sb_rdonly(SB) | -A && (sb_rdonly(SB)) +A && sb_rdonly(SB) | -A || (sb_rdonly(SB)) +A || sb_rdonly(SB) | -(sb_rdonly(SB)) != A +sb_rdonly(SB) != A | -(sb_rdonly(SB)) == A +sb_rdonly(SB) == A | -(sb_rdonly(SB)) && A +sb_rdonly(SB) && A | -(sb_rdonly(SB)) || A +sb_rdonly(SB) || A ) @@ expression A, B, SB; @@ ( -(sb_rdonly(SB)) ? 1 : 0 +sb_rdonly(SB) | -(sb_rdonly(SB)) ? A : B +sb_rdonly(SB) ? A : B ) to remove left over excess bracketage and finally by applying: @@ expression A, SB; @@ ( -(A & MS_RDONLY) != sb_rdonly(SB) +(bool)(A & MS_RDONLY) != sb_rdonly(SB) | -(A & MS_RDONLY) == sb_rdonly(SB) +(bool)(A & MS_RDONLY) == sb_rdonly(SB) ) to make comparisons against the result of sb_rdonly() (which is a bool) work correctly. Signed-off-by: David Howells <dhowells@redhat.com>
2017-02-05ext4: add shutdown bit and check for itTheodore Ts'o1-0/+11
Add a shutdown bit that will cause ext4 processing to fail immediately with EIO. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-17ext4: fix potential use after free in __ext4_journal_stopLukas Czerner1-3/+3
There is a use-after-free possibility in __ext4_journal_stop() in the case that we free the handle in the first jbd2_journal_stop() because we're referencing handle->h_err afterwards. This was introduced in 9705acd63b125dee8b15c705216d7186daea4625 and it is wrong. Fix it by storing the handle->h_err value beforehand and avoid referencing potentially freed handle. Fixes: 9705acd63b125dee8b15c705216d7186daea4625 Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Cc: stable@vger.kernel.org
2015-05-14ext4: fix NULL pointer dereference when journal restart failsLukas Czerner1-0/+6
Currently when journal restart fails, we'll have the h_transaction of the handle set to NULL to indicate that the handle has been effectively aborted. We handle this situation quietly in the jbd2_journal_stop() and just free the handle and exit because everything else has been done before we attempted (and failed) to restart the journal. Unfortunately there are a number of problems with that approach introduced with commit 41a5b913197c "jbd2: invalidate handle if jbd2_journal_restart() fails" First of all in ext4 jbd2_journal_stop() will be called through __ext4_journal_stop() where we would try to get a hold of the superblock by dereferencing h_transaction which in this case would lead to NULL pointer dereference and crash. In addition we're going to free the handle regardless of the refcount which is bad as well, because others up the call chain will still reference the handle so we might potentially reference already freed memory. Moreover it's expected that we'll get aborted handle as well as detached handle in some of the journalling function as the error propagates up the stack, so it's unnecessary to call WARN_ON every time we get detached handle. And finally we might leak some memory by forgetting to free reserved handle in jbd2_journal_stop() in the case where handle was detached from the transaction (h_transaction is NULL). Fix the NULL pointer dereference in __ext4_journal_stop() by just calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix the potential memory leak in jbd2_journal_stop() and use proper handle refcounting before we attempt to free it to avoid use-after-free issues. And finally remove all WARN_ON(!transaction) from the code so that we do not get random traces when something goes wrong because when journal restart fails we will get to some of those functions. Cc: stable@vger.kernel.org Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-10-01ext4: fix over-defensive complaint after journal abortDmitry Monakhov1-2/+2
Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-05-12ext4: make local functions staticStephen Hemminger1-3/+4
I have been running make namespacecheck to look for unneeded globals, and found these in ext4. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-12jbd2: improve error messages for inconsistent journal headsTheodore Ts'o1-0/+10
Fix up error messages printed when the transaction pointers in a journal head are inconsistent. This improves the error messages which are printed when running xfstests generic/068 in data=journal mode. See the bug report at: https://bugzilla.kernel.org/show_bug.cgi?id=60786 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-12-02ext4: call ext4_error_inode() if jbd2_journal_dirty_metadata() failsTheodore Ts'o1-0/+9
While it's true that errors can only happen if there is a bug in jbd2_journal_dirty_metadata(), if a bug does happen, we need to halt the kernel or remount the file system read-only in order to avoid further data loss. The ext4_journal_abort_handle() function doesn't do any of this, and while it's likely that this call (since it doesn't adjust refcounts) will likely result in the file system eventually deadlocking since the current transaction will never be able to close, it's much cleaner to call let ext4's error handling system deal with this situation. There's a separate bug here which is that if certain jbd2 errors errors occur and file system is mounted errors=continue, the file system will probably eventually end grind to a halt as described above. But things have been this way in a long time, and usually when we have these sorts of errors it's pretty much a disaster --- and that's why the jbd2 layer aggressively retries memory allocations, which is the most likely cause of these jbd2 errors. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2013-08-12jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()Jan Kara1-4/+4
When jbd2_journal_dirty_metadata() returns error, __ext4_handle_dirty_metadata() stops the handle. However callers of this function do not count with that fact and still happily used now freed handle. This use after free can result in various issues but very likely we oops soon. The motivation of adding __ext4_journal_stop() into __ext4_handle_dirty_metadata() in commit 9ea7a0df seems to be only to improve error reporting. So replace __ext4_journal_stop() with ext4_journal_abort_handle() which was there before that commit and add WARN_ON_ONCE() to dump stack to provide useful information. Reported-by: Sage Weil <sage@inktank.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org # 3.2+
2013-06-04ext4: provide wrappers for transaction reservation callsJan Kara1-11/+47
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04jbd2: transaction reservation supportJan Kara1-1/+1
In some cases we cannot start a transaction because of locking constraints and passing started transaction into those places is not handy either because we could block transaction commit for too long. Transaction reservation is designed to solve these issues. It reserves a handle with given number of credits in the journal and the handle can be later attached to the running transaction without blocking on commit or checkpointing. Reserved handles do not block transaction commit in any way, they only reduce maximum size of the running transaction (because we have to always be prepared to accomodate request for attaching reserved handle). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-21ext4: mark metadata blocks using bh flagsTheodore Ts'o1-0/+2
This allows metadata writebacks which are issued via block device writeback to be sent with the current write request flags. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03ext4: add might_sleep() annotationsTheodore Ts'o1-0/+6
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2013-02-08ext4: pass context information to jbd2__journal_start()Theodore Ts'o1-2/+3
So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08ext4: move the jbd2 wrapper functions out of super.cTheodore Ts'o1-0/+101
Move the jbd2 wrapper functions which start and stop handles out of super.c, where they don't really logically belong, and into ext4_jbd2.c. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-10-10ext4: fix metadata checksum calculation for the superblockTheodore Ts'o1-6/+2
The function ext4_handle_dirty_super() was calculating the superblock on the wrong block data. As a result, when the superblock is modified while it is mounted (most commonly, when inodes are added or removed from the orphan list), the superblock checksum would be wrong. We didn't notice because the superblock *was* being correctly calculated in ext4_commit_super(), and this would get called when the file system was unmounted. So the problem only became obvious if the system crashed while the file system was mounted. Fix this by removing the poorly designed function signature for ext4_superblock_csum_set(); if it only took a single argument, the pointer to a struct superblock, the ambiguity which caused this mistake would have been impossible. Reported-by: George Spelvin <linux@horizon.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-07-22ext4: remove unnecessary argument from __ext4_handle_dirty_metadata()Artem Bityutskiy1-2/+1
The '__ext4_handle_dirty_metadata()' does not need the 'now' argument anymore and we can kill it. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2012-07-22ext4: remove unnecessary superblock dirtyingArtem Bityutskiy1-3/+2
This patch changes the 'ext4_handle_dirty_super()' function which submits the superblock for I/O in the following cases: 1. When creating the first large file on a file system without EXT4_FEATURE_RO_COMPAT_LARGE_FILE feature. 2. When re-sizing the file-system. 3. When creating an xattr on a file-system without the EXT4_FEATURE_COMPAT_EXT_ATTR feature. If the file-system has journal enabled, the superblock is written via the journal. We do not modify this path. If the file-system has no journal, this function, falls back to just marking the superblock as dirty using the 's_dirt' superblock flag. This means that it delays the actual superblock I/O submission by 5 seconds (default setting). Namely, the 'sync_supers()' kernel thread will call 'ext4_write_super()' later and will actually submit the superblock for I/O. And this is the behavior this patch modifies: we stop using 's_dirt' and just mark the superblock buffer as dirty right away. Indeed, all 3 cases above are extremely rare and it does not add any value to delay the I/O submission for them. Note: 'ext4_handle_dirty_super()' executes '__ext4_handle_dirty_super()' with 'now = 0'. This patch basically makes the 'now' argument unneeded and it will be deleted in one of the next patches. This patch also removes 's_dirt' condition on the unmount path because we never set it anymore, so we should not test it. Tested using xfstests for both journalled and non-journalled ext4. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2012-04-29ext4: calculate and verify superblock checksumDarrick J. Wong1-1/+8
Calculate and verify the superblock checksum. Since the UUID and block group number are embedded in each copy of the superblock, we need only checksum the entire block. Refactor some of the code to eliminate open-coding of the checksum update call. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-09-04jbd2: add debugging information to jbd2_journal_dirty_metadata()Theodore Ts'o1-3/+5
Add debugging information in case jbd2_journal_dirty_metadata() is called with a buffer_head which didn't have jbd2_journal_get_write_access() called on it, or if the journal_head has the wrong transaction in it. In addition, return an error code. This won't change anything for ocfs2, which will BUG_ON() the non-zero exit code. For ext4, the caller of this function is ext4_handle_dirty_metadata(), and on seeing a non-zero return code, will call __ext4_journal_stop(), which will print the function and line number of the (buggy) calling function and abort the journal. This will allow us to recover instead of bug halting, which is better from a robustness and reliability point of view. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-09ext4: remove unneeded ext4_journal_get_undo_accessTheodore Ts'o1-14/+0
The block allocation code used to use jbd2_journal_get_undo_access as a way to make changes that wouldn't show up until the commit took place. The new multi-block allocation code has a its own way of preventing newly freed blocks from getting reused until the commit takes place (it avoids updating the buddy bitmaps until the commit is done), so we don't need to use jbd2_journal_get_undo_access(), which has extra overhead compared to jbd2_journal_get_write_access(). There was one last vestigal use of ext4_journal_get_undo_access() in ext4_add_groupblocks(); change it to use ext4_journal_get_write_access() and then remove the ext4_journal_get_undo_access() support. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Save error information to the superblock for analysisTheodore Ts'o1-0/+5
Save number of file system errors, and the time function name, line number, block number, and inode number of the first and most recent errors reported on the file system in the superblock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 17:36:36 +0000