summaryrefslogtreecommitdiff
path: root/drivers/mtd/chips
AgeCommit message (Collapse)AuthorFilesLines
2024-10-21mtd: cfi_cmdset_0002: remove redundant assignment to variable retColin Ian King1-3/+1
Variable ret is being assigned a value that is never read, the following goto statement jumps to a statement that assigns ret a return from the call to function do_write_oneword_once. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20241002172258.958113-1-colin.i.king@gmail.com
2024-07-01mtd: add missing MODULE_DESCRIPTION() macrosJeff Johnson2-0/+2
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/parsers/brcm_u-boot.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/parsers/tplink_safeloader.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/chips/cfi_util.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/chips/cfi_cmdset_0020.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/maps/map_funcs.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240610-md-drivers-mtd-v1-1-0f59183e4005@quicinc.com
2024-02-26mtd: chips: remove redundant assignment to variable timeoColin Ian King1-2/+2
In two functions the variable timeo is being initialized with a value that is never read, it is being re-assigned later on. The initializations are redundant and can be removed. Cleans up clang scan build warning: warning: Value stored to 'timeo' during its initialization is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240215140106.2062858-1-colin.i.king@gmail.com
2023-10-27mtd: cfi_cmdset_0001: Byte swap OTP infoLinus Walleij1-2/+18
Currently the offset into the device when looking for OTP bits can go outside of the address of the MTD NOR devices, and if that memory isn't readable, bad things happen on the IXP4xx (added prints that illustrate the problem before the crash): cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x00000100 ixp4xx_copy_from copy from 0x00000100 to 0xc880dd78 cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x12000000 ixp4xx_copy_from copy from 0x12000000 to 0xc880dd78 8<--- cut here --- Unable to handle kernel paging request at virtual address db000000 [db000000] *pgd=00000000 (...) This happens in this case because the IXP4xx is big endian and the 32- and 16-bit fields in the struct cfi_intelext_otpinfo are not properly byteswapped. Compare to how the code in read_pri_intelext() byteswaps the fields in struct cfi_pri_intelext. Adding a small byte swapping loop for the OTP in read_pri_intelext() and the crash goes away. The problem went unnoticed for many years until I enabled CONFIG_MTD_OTP on the IXP4xx as well, triggering the bug. Cc: stable@vger.kernel.org Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231020-mtd-otp-byteswap-v4-1-0d132c06aa9d@linaro.org
2023-09-22mtd: map_ram: prevent use of point and unpoint when NO_XIP is setShivamurthy Shastri1-2/+6
When the DT property no-unaligned-direct-access is set, map->phys is set to NO_XIP. With this property set, the flash should not be exposed directly to MTD users, since it cannot be mapped. map_ram() exposes the flash direct access unconditionally which leads to access errors (when the bus width does not match the RAM width). Therefore do not set point and unpoint when NO_XIP is set. Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Reviewed-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230919113320.16953-1-shivamurthy.shastri@linutronix.de
2023-08-18mfd: Explicitly include correct DT includesRob Herring1-2/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230714174731.4059811-1-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-09mtd: chips: Use SPDX license headersLinus Walleij9-11/+15
Some of the files in mtd/chips do not have a SPDX license header, presumably because the text string "GPL'd" didn't parse with Thomas rulesets for magic license tagging. Fix this, the code is initially from RedHat which clearly targeted the Linux kernel and intended it to be GPLv2. In any case the original author appears to be David Woodhouse who can then confirm this. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230603185200.3571174-1-linus.walleij@linaro.org
2022-04-28mtd: cfi_cmdset_0002: Rename chip_ready variablesTokunori Ikegami1-7/+7
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-5-ikegami.t@gmail.com
2022-04-28mtd: cfi_cmdset_0002: Add S29GL064N ID definitionTokunori Ikegami1-2/+3
It is for the model number 01, 02, V1 and V2. Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-4-ikegami.t@gmail.com
2022-04-28mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064NTokunori Ikegami1-8/+34
Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") buffered writes fail on S29GL064N. This is because, on S29GL064N, reads return 0xFF at the end of DQ polling for write completion, where as, chip_good() check expects actual data written to the last location to be returned post DQ polling completion. Fix is to revert to using chip_good() for S29GL064N which only checks for DQ lines to settle down to determine write completion. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Cc: stable@vger.kernel.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com
2022-04-28mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_writeTokunori Ikegami1-63/+32
This is a preparation patch for the S29GL064N buffer writes fix. There is no functional change. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Cc: stable@vger.kernel.org Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-2-ikegami.t@gmail.com
2021-12-09mtd: gen_probe: Use bitmap_zalloc() when applicableChristophe JAILLET1-5/+4
'chip_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/a6fe58dffe553a3e79303777d3ba9c60d7613c5b.1637510255.git.christophe.jaillet@wanadoo.fr
2021-10-15mtd: fixup CFI on ixp4xxArnd Bergmann1-0/+2
drivers/mtd/maps/ixp4xx.c requires MTD_CFI_BE_BYTE_SWAP to be set in order to compile. drivers/mtd/maps/ixp4xx.c:57:4: error: #error CONFIG_MTD_CFI_BE_BYTE_SWAP required This patch avoids the #error output by enforcing the policy in Kconfig. Not sure if this is the right approach, but it helps doing randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210927141045.1597593-1-arnd@kernel.org
2021-08-16Merge tag 'mtd/fixes-for-5.14-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD core fixes: - Fix lock hierarchy in deregister_mtd_blktrans - Handle flashes without OTP gracefully - Break circular locks in register_mtd_blktrans MTD device fixes: - mchp48l640: - Fix memory leak on cmd - Silence some uninitialized variable warnings - blkdevs: - Initialize rq.limits.discard_granularity CFI fixes: - Fix crash when erasing/writing AMD cards Raw NAND fixes: - Fix of_get_nand_secure_regions(): - Add a missing check - Avoid an unwanted probe failure when a DT property is missing" * tag 'mtd/fixes-for-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: Fix probe failure due to of_get_nand_secure_regions() mtd: fix lock hierarchy in deregister_mtd_blktrans mtd: devices: mchp48l640: Fix memory leak on cmd mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cards mtd: core: handle flashes without OTP gracefully mtd: mchp48l640: silence some uninitialized variable warnings mtd: break circular locks in register_mtd_blktrans mtd: rawnand: Add a check in of_get_nand_secure_regions() mtd: mtd_blkdevs: Initialize rq.limits.discard_granularity
2021-07-16mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cardsAndreas Persson1-1/+1
Erasing an AMD linear flash card (AM29F016D) crashes after the first sector has been erased. Likewise, writing to it crashes after two bytes have been written. The reason is a missing check for a null pointer - the cmdset_priv field is not set for this type of card. Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Andreas Persson <andreasp56@outlook.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/DB6P189MB05830B3530B8087476C5CFE4C1159@DB6P189MB0583.EURP189.PROD.OUTLOOK.COM
2021-07-12mtd: cfi_util: Fix unreachable code issueGustavo A. R. Silva1-2/+2
Fix the following warning: drivers/mtd/chips/cfi_util.c:112:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__)) ^ drivers/mtd/chips/cfi_util.c:168:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__)) by placing the fallthrough; statement inside ifdeffery. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-11mtd: Convert list_for_each to entry variantZou Wei1-4/+1
convert list_for_each() to list_for_each_entry() where applicable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1623155699-61935-1-git-send-email-zou_wei@huawei.com
2021-04-16mtd: core: Constify buf in mtd_write_user_prot_reg()Tudor Ambarus2-6/+7
The write buffer comes from user and should be const. Constify write buffer in mtd core and across all _write_user_prot_reg() users. cfi_cmdset_{0001, 0002} and onenand_base will pay the cost of an explicit cast to discard the const qualifier since the beginning, since they are using an otp_op_t function prototype that is used for both reads and writes. mtd_dataflash and SPI NOR will benefit of the const buffer because they are using different paths for writes and reads. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210403060931.7119-1-tudor.ambarus@microchip.com
2021-04-15Merge tag 'cfi/for-5.13' of ↵Richard Weinberger1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next CFI changes Just a couple of fixes for v5.13-rc1 * Disable broken buffered writes for CFI chips within ID 0x2201 * Address a Coverity report for unused value
2021-04-08mtd: cfi_cmdset_0002: remove redundant assignment to variable timeoColin Ian King1-1/+1
The variable timeo is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20210325174514.486272-1-colin.king@canonical.com Addresses-Coverity: ("Unused value")
2021-04-08mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip 0x2201Mauri Sandberg1-0/+4
Buffer writes do not work with AMD chip 0x2201. The chip in question is a AMD/Spansion/Cypress Semiconductor S29GL256N and datasheet [1] talks about writing buffers being possible. While waiting for a neater solution resort to writing word-sized chunks only. Without the patch kernel logs will be flooded with entries like below: jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 jffs2_build_filesystem(): unlocking the mtd device... done. jffs2_build_filesystem(): erasing all blocks after the end marker... MTD do_write_buffer_wait(): software timeout, address:0x01ec000a. jffs2: Write clean marker to block at 0x01920000 failed: -5 MTD do_write_buffer_wait(): software timeout, address:0x01e2000a. jffs2: Write clean marker to block at 0x01880000 failed: -5 MTD do_write_buffer_wait(): software timeout, address:0x01e0000a. jffs2: Write clean marker to block at 0x01860000 failed: -5 MTD do_write_buffer_wait(): software timeout, address:0x01dc000a. jffs2: Write clean marker to block at 0x01820000 failed: -5 MTD do_write_buffer_wait(): software timeout, address:0x01da000a. jffs2: Write clean marker to block at 0x01800000 failed: -5 ... Tested on a Buffalo wzr-hp-g300nh running kernel 5.10.16. [1] https://www.cypress.com/file/219941/download or https://datasheetspdf.com/pdf-file/565708/SPANSION/S29GL256N/1 Signed-off-by: Mauri Sandberg <sandberg@mailfence.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20210309174859.362060-1-sandberg@mailfence.com
2021-03-11mtd: cfi: Fix fall-through warnings for ClangGustavo A. R. Silva3-0/+5
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements and a return instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210305081933.GA137147@embeddedor
2020-08-02mtd: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-04-30mtd: cfi_cmdset_0001: Support the absence of protection registersJean-Philippe Brucker1-5/+8
The flash controller implemented by the Arm Base platform behaves like the Intel StrataFlash J3 device, but omits several features. In particular it doesn't implement a protection register, so "Number of Protection register fields" in the Primary Vendor-Specific Extended Query, is 0. The Intel StrataFlash J3 datasheet only lists 1 as a valid value for NumProtectionFields. It describes the field as: "Number of Protection register fields in JEDEC ID space. “00h,” indicates that 256 protection bytes are available" While a value of 0 may arguably not be architecturally valid, the driver's current behavior is certainly wrong: if NumProtectionFields is 0, read_pri_intelext() adds a negative value to the unsigned extra_size, and ends up in an infinite loop. Fix it by ignoring a NumProtectionFields of 0. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-30mtd: Convert fallthrough comments into statementsMiquel Raynal4-22/+16
Use Joe Perches cvt_fallthrough.pl script to convert /* fallthrough */ comments (and its derivatives) into a fallthrough; statement. This automatically drops useless ones. Do it MTD-wide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/linux-mtd/20200325212115.14170-1-miquel.raynal@bootlin.com
2019-11-09mtd: cfi_cmdset_0002: fix delayed error detection on HyperFlashSergei Shtylyov1-25/+33
The commit 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") added checking for the status register error bits into chip_good() to only return 1 if these bits are 0s. Unfortunately, this means that polling using chip_good() always reaches a timeout condition when erase or program failure bits are set. Let's fully delegate the task of determining the error conditions to cfi_check_err_status() and make chip_good() only look for the Device Ready/Busy condition. Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-09mtd: cfi_cmdset_0002: only check errors when ready in cfi_check_err_status()Sergei Shtylyov1-0/+4
Cypress S26K{L|S}P{128|256|512}S datasheet says that the error bits in the status register are only valid when the "device ready" bit 7 is set. Add the check for the device ready bit in cfi_check_err_status() as that function isn't always called with this bit set. Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-09mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup()Hou Tao1-1/+0
Else there may be a double-free problem, because cfi->cfiq will be freed by mtd_do_chip_probe() if both the two invocations of check_cmd_set() return failure. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-09mtd: cfi_cmdset_*: kill useless 'ret' variable initializersSergei Shtylyov3-18/+18
The 'ret' local variables are typically initialized to 0 but this value is often unused, thus we can kill those initializers. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-09mtd: cfi_util: use DIV_ROUND_UP() in cfi_udelay()Sergei Shtylyov1-1/+1
Use DIV_ROUND_UP() in cfi_udelay() instead of open-coding it... Doing this also helpfully gets rid of two complaints from 'scripts/checkpatch.pl --strict': CHECK: spaces preferred around that '+' (ctx:VxV) #29: FILE: drivers/mtd/chips/cfi_util.c:29: + msleep((us+999)/1000); ^ CHECK: spaces preferred around that '/' (ctx:VxV) #29: FILE: drivers/mtd/chips/cfi_util.c:29: + msleep((us+999)/1000); ^ Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-09-15mtd: cfi_cmdset_0002: Fix do_erase_chip() to get chip as erasing modeTokunori Ikegami1-1/+1
The chip state is set to erasing by the function after getting chip. So it should be to get chip as erasing mode at first. But previously it was to get chip as writing mode then fix as erasing. Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Richard Weinberger <richard@nod.at>
2019-08-27mtd: cfi_cmdset_0002: Disable write buffer functions if FORCE_WORD_WRITE is 1Tokunori Ikegami1-0/+6
Some write buffer functions are not used when FORCE_WORD_WRITE is set to 1. So the compile warning messages are output if FORCE_WORD_WRITE is 1. To resolve this disable the write buffer functions if FORCE_WORD_WRITE is 1. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-08-27mtd: cfi_cmdset_0002: Split do_write_oneword() to reduce exit pathsTokunori Ikegami1-14/+24
The do_write_oneword_done() is called twice at the exit paths. By splitting the retry functionality it can be reduced to call once. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-08-27mtd: cfi_cmdset_0002: Split wait for write buffer completion sequenceTokunori Ikegami1-41/+51
Split wait for write completion from do_write_buffer() into separate function. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Reword commit message] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-08-27mtd: cfi_cmdset_0002: Split write-to-buffer-reset sequenceTokunori Ikegami1-16/+22
Just refactor to split the sequence from do_write_buffer(). Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-08-27mtd: cfi_cmdset_0002: Split do_write_oneword() op_done goto statementTokunori Ikegami1-19/+43
To reduce function size and to remove the goto statement, split the op_done goto statement part into do_write_oneword_done(). Also split the start part into do_write_oneword_start() to be symmetrical. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Reword commit message] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-08-27mtd: cfi_cmdset_0002: Split do_write_oneword() to reduce function sizeTokunori Ikegami1-40/+50
Reduce the size of do_write_oneword() by extracting a helper function for the hardware access. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-08-27mtd: cfi_cmdset_0002: Remove goto statement from do_write_buffer()Tokunori Ikegami1-26/+27
Remove goto statement from do_write_buffer() to simplify the code flow. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Reword commit message] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-08-27mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()Tokunori Ikegami1-6/+12
As reported by the OpenWRT team, write requests sometimes fail on some platforms. Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet. Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error checking"). But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command. By using chip_good() to check the state to be done it can be reduced the retry with reset. It is depended on the actual flash chip behavior so the root cause is unknown. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Reported-by: Fabio Bettoni <fbettoni@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Fix a checkpatch warning] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-08-27mtd: chips: gen_probe: kill useless initializer in mtd_do_chip_probe()Sergei Shtylyov1-1/+1
The 'mtd' local variable is initialized but this value is never used, thus kill that initializer. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-07-06Merge tag 'nand/for-5.3' of ↵Richard Weinberger3-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: * fix BCH ECC layout for large page NAND parts * fallback to detected ecc-strength, ecc-step-size * when oops in progress use pio and interrupt polling * code refactor code to introduce helper functions * add support for v7.3 controller - FSMC: * use nand_op_trace for operation tracing - GPMI: * move all driver code into single file * various cleanups (including dmaengine changes) * use runtime PM to manage clocks * implement exec_op - MTK: * correct low level time calculation of r/w cycle * improve data sampling timing for read cycle * add validity check for CE# pin setting * fix wrongly assigned OOB buffer pointer issue * re-license MTK NAND driver as Dual MIT/GPL - STM32: * manage the get_irq error case * increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips
2019-06-27mtd: cfi_cmdset_0002: Add support for polling status registerVignesh Raghavendra1-17/+113
HyperFlash devices are compliant with CFI AMD/Fujitsu Extended Command Set (0x0002) for flash operations, therefore drivers/mtd/chips/cfi_cmdset_0002.c can be used as is. But these devices do not support DQ polling method of determining chip ready/good status. These flashes provide Status Register whose bits can be polled to know status of flash operation. Cypress HyperFlash datasheet here[1], talks about CFI Amd/Fujitsu Extended Query version 1.5. Bit 0 of "Software Features supported" field of CFI Primary Vendor-Specific Extended Query table indicates presence/absence of status register and Bit 1 indicates whether or not DQ polling is supported. Using these bits, its possible to determine whether flash supports DQ polling or need to use Status Register. Add support for polling Status Register to know device ready/status of erase/write operations when DQ polling is not supported. Print error messages on erase/program failure by looking at related Status Register bits. [1] https://www.cypress.com/file/213346/download Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: cfi_cmdset_0002: dynamically determine the max sectorsChris Packham1-5/+8
Because PPB unlocking unlocks the whole chip cfi_ppb_unlock() needs to remember the locked status for each sector so it can re-lock the unaddressed sectors. Dynamically calculate the maximum number of sectors rather than using a hardcoded value that is too small for larger chips. Tested with Spansion S29GL01GS11TFI flash device. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner2-0/+2
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06mtd: cfi_cmdset_0002: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mtd/chips/cfi_cmdset_0002.c: In function ‘get_chip’: drivers/mtd/chips/cfi_cmdset_0002.c:870:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (mode == FL_READY && chip->oldstate == FL_READY) ^ drivers/mtd/chips/cfi_cmdset_0002.c:873:2: note: here default: ^~~~~~~ drivers/mtd/chips/cfi_cmdset_0002.c: In function ‘cfi_amdstd_sync’: drivers/mtd/chips/cfi_cmdset_0002.c:2745:16: warning: this statement may fall through [-Wimplicit-fallthrough=] chip->state = FL_SYNCING; ~~~~~~~~~~~~^~~~~~~~~~~~ drivers/mtd/chips/cfi_cmdset_0002.c:2750:3: note: here case FL_SYNCING: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-06mtd: cfi_util: mark expected switch fall-throughsGustavo A. R. Silva1-0/+6
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mtd/chips/cfi_util.c: In function ‘cfi_build_cmd’: drivers/mtd/chips/cfi_util.c:110:10: warning: this statement may fall through [-Wimplicit-fallthrough=] onecmd |= (onecmd << (chip_mode * 32)); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:112:2: note: here case 4: ^~~~ drivers/mtd/chips/cfi_util.c:113:10: warning: this statement may fall through [-Wimplicit-fallthrough=] onecmd |= (onecmd << (chip_mode * 16)); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:114:2: note: here case 2: ^~~~ drivers/mtd/chips/cfi_util.c: In function ‘cfi_merge_status’: drivers/mtd/chips/cfi_util.c:163:7: warning: this statement may fall through [-Wimplicit-fallthrough=] res |= (onestat >> (chip_mode * 32)); ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:165:2: note: here case 4: ^~~~ drivers/mtd/chips/cfi_util.c:166:7: warning: this statement may fall through [-Wimplicit-fallthrough=] res |= (onestat >> (chip_mode * 16)); ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:167:2: note: here case 2: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-04-05mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_bufferLiu Jian1-1/+5
In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Yi Huaijie <yihuaijie@huawei.com> Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Tokunori Ikegami <ikegami_to@yahoo.co.jp> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-01-15mtd: cfi: cmdset_0001: Use struct_size() in kmalloc()Gustavo A. R. Silva1-1/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-15mtd: gen_probe: Use struct_size() in kmalloc()Gustavo A. R. Silva1-1/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 07:47:34 +0000