summaryrefslogtreecommitdiff
path: root/arch/powerpc/boot/dts/tqm8560.dts
AgeCommit message (Collapse)AuthorFilesLines
2022-09-28powerpc: Include e500v1_power_isa.dtsi for remaining e500v1 platformsPali Rohár1-0/+2
There are still some board device tree files without Power ISA properties which have Freescale e500v1 cores, namely those which are based on Freescale mpc8540, mpc8541, mpc8555 and mpc8560 processors. So include newly introduced e500v1_power_isa.dtsi file in devices tree files with those processors. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220902212103.22534-2-pali@kernel.org
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-16dt/bindings: Remove all references to device_type "ethernet-phy"Grant Likely1-3/+0
The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-27powerpc/85xx: specify interrupt for pq3-localbus devicesDmitry Eremin-Solenikov1-0/+2
fsl-lbc driver requires an interrupt to bind to localbus device. Populate 85xx boards' dts trees with lbc interrupt info. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04powerpc/tqm85xx: update PCI interrupt-map attributeDmitry Eremin-Solenikov1-1/+8
Update PCI IRQ mapping on TQM85xx platforms: include INTC and INTD on PCI-X slot and add INTA/INTB mapping for PCMCIA bridge. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/fsl: Removed reg property from 85xx/86xx soc nodeKumar Gala1-1/+0
Between the addition of the ecm/mcm law nodes and the fact that the get_immrbase() has been using the range property of the SoC to determine the base address of CCSR space we no longer need the reg property at the soc node level. It has been ill specified and varied between device trees to cover either the {e,m}cm-law node, some odd subset of CCSR space or all of CCSR space. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/85xx: Add new LAW & ECM device tree nodes for all 85xx systemsKumar Gala1-0/+13
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/fsl: Remove cell-index from PCI nodesKumar Gala1-1/+0
The cell-index property isn't used on PCI nodes and is ill defined. Remove it for now and if someone comes up with a good reason and consistent definition for it we can add it back Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodesWolfgang Grandegger1-2/+2
Commit 0f73a449a649acfca91404a98a35353a618b9555 added I2C device nodes for the LM75 thermal sensor on the TQM85xx modules, unfortunately with the wrong I2C address. The LM75s are located at address 0x48. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-31powerpc/85xx: Use fsl,mpc85.. as prefix for memory ctrl & l2-cache nodesKumar Gala1-2/+2
Older devices tree's used "fsl,85.." instead of the preferred "fsl,mpc85.." for the memory controller & l2 cache controller nodes. The EDAC code is the only use of these and has been updated for some time to support both "fsl,85.." and "fsl,mpc85.." Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24powerpc/85xx: Move gianfar mdio nodes under the ethernet nodesAnton Vorontsov1-42/+48
Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-02powerpc/85xx: TQM85xx - add i2c device nodes for LM75Wolfgang Grandegger1-0/+5
Automatic I2C device probing is not done any more. Therefore we need proper DTS device node definitions for the I2C LM75 thermal sensor on the TQM85xx modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-02powerpc/85xx: TQM85xx - fix sensitivity of CAN interruptsWolfgang Grandegger1-2/+2
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-16gianfar: Convert gianfar to an of_platform_driverAndy Fleming1-0/+18
Does the same for the accompanying MDIO driver, and then modifies the TBI configuration method. The old way used fields in einfo, which no longer exists. The new way is to create an MDIO device-tree node for each instance of gianfar, and create a tbi-handle property to associate ethernet controllers with the TBI PHYs they are connected to. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-27powerpc: Add dma nodes to 83xx, 85xx and 86xx boardsKumar Gala1-0/+41
Added DMA nodes for the elo/elo-plus DMA engines. Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that its the same as all the other boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: add local bus nodes for Flash and CAN to tqm8560.dtsWolfgang Grandegger1-0/+65
This patch adds local bus nodes for Flash and CAN to the DTS file of the TQM8560 module (tqm8560.dts). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/85xx: correct vendor prefix in DTS files for TQM85xx modulesWolfgang Grandegger1-2/+2
Like for the TQM5200, the vendor prefix "tqc," is now used for all TQM85xx modules from TQ-Components GmbH (http://www.tqc.de) in the corresponding DTS files. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-02[POWERPC] 85xx: Add next-level-cache propertyKumar Gala1-1/+2
Added next-level-cache to the L1 and a reference to the new L2 label. This is per the ePAPR 0.94 spec. Since we are't really dependent on this today we aren't supporting the "legacy" l2-cache phandle that is specified in the PPC v2.1 OF Binding spec. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-02[POWERPC] Cleanup mpic nodes in .dtsKumar Gala1-0/+1
Removed clock-frequency, big-endian, and built-in props as they aren't specified anywhere. Also added compatible = "chrp,open-pic" in the places it was missing. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xxKumar Gala1-1/+1
* "simple-bus" covers all our needs for of_platform_bus_probe() * make device tree name just 'soc' not 'soc85..' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port TQM85xx boards over from arch/ppcKumar Gala1-0/+245
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 08:36:55 +0000