summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/usb
AgeCommit message (Collapse)AuthorFilesLines
2024-11-29Merge tag 'usb-6.13-rc1' of ↵Linus Torvalds13-9/+138
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.13-rc1. Overall, a pretty slow development cycle, the majority of the work going into the debugfs interface for the thunderbolt (i.e. USB4) code, to help with debugging the myrad ways that hardware vendors get their interfaces messed up. Other than that, here's the highlights: - thunderbolt changes and additions to debugfs interfaces - lots of device tree updates for new and old hardware - UVC configfs gadget updates and new apis for features - xhci driver updates and fixes - dwc3 driver updates and fixes - typec driver updates and fixes - lots of other small updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property dt-bindings: connector: Add time property for Sink BC12 detection completion usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb usb: dwc3: gadget: Cleanup SG handling usb: dwc3: gadget: Fix looping of queued SG entries usb: dwc3: gadget: Fix checking for number of TRBs left usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED Revert "usb: gadget: composite: fix OS descriptors w_value logic" usb: ehci-spear: fix call balance of sehci clk handling routines USB: make to_usb_device_driver() use container_of_const() USB: make to_usb_driver() use container_of_const() USB: properly lock dynamic id list when showing an id USB: make single lock for all usb dynamic id lists drivers/usb/storage: refactor min with min_t drivers/usb/serial: refactor min with min_t drivers/usb/musb: refactor min/max with min_t/max_t drivers/usb/mon: refactor min with min_t drivers/usb/misc: refactor min with min_t drivers/usb/host: refactor min/max with min_t/max_t ...
2024-11-27Merge tag 'phy-for-6.13' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New hardware support: - ST STM32MP25 combophy support - Sparx5 support for lan969x serdes and updates to driver to support this - NXP PTN3222 eUSB2 to USB2 redriver - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2 support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP UFS PHY support and SA8775P eDP PHY support - Rockchip rk3576 usbdp and rk3576 usb2 phy support - Binding for Microchip ATA6561 can phy Updates: - Freescale driver updates from hdmi support - Conversion of rockchip rk3228 hdmi phy binding to yaml - Broadcom usb2-phy deprecated support dropped and USB init array update for BCM4908 - TI USXGMII mode support in J7200 - Switch back to platform_driver::remove() subsystem update" * tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits) phy: qcom: qmp: Fix lecacy-legacy typo phy: lan969x-serdes: add support for lan969x serdes driver dt-bindings: phy: sparx5: document lan969x phy: sparx5-serdes: add support for branching on chip type phy: sparx5-serdes: add indirection layer to register macros phy: sparx5-serdes: add function for getting the CMU index phy: sparx5-serdes: add ops to match data phy: sparx5-serdes: add constant for the number of CMU's phy: sparx5-serdes: add constants to match data phy: sparx5-serdes: add support for private match data phy: bcm-ns-usb2: drop support for old binding variant dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300 dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561 phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll() phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l() phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out() phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL ...
2024-11-16dt-bindings: usb: maxim,max33359: add usage of sink bc12 time propertyAmit Sunil Dhamne1-0/+1
Add usage of "sink-bc12-completion-time-ms" connector property to max33359 controller for delaying PD negotiation till BC1.2 detection completes. This overcomes the occasional delays observed while receiving PD messages where BC1.2 detection runs in parallel. Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241103034402.2460252-3-amitsd@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-12dt-bindings: usb: add A523 compatible string for EHCI and OCHIAndre Przywara2-0/+2
The Allwinner A523/T527 feature generic EHCI and OHCI compatible USB-2.0 host controllers (in addition to an MUSB and an XHCI controller). Add the new name to the list of supported compatible strings. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241111013033.22793-10-andre.przywara@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-12dt-bindings: usb: sunxi-musb: add Allwinner A523 compatible stringAndre Przywara1-0/+1
The Allwinner A523/T527 SoCs have a MUSB controller fully compatible to the D1 (and ultimately the A33), with five endpoints. Add the new name to the list of compatible strings. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241111013033.22793-9-andre.przywara@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-05dt-bindings: usb: qcom,dwc3: Add SAR2130P compatibleDmitry Baryshkov1-0/+2
Document compatible for the Synopsys DWC3 USB Controller on SAR2130P platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241017-sar2130p-usb-v1-1-21e01264b70e@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-04dt-bindings: usb: Describe TUSB1046 crosspoint switchRomain Gantois1-0/+49
Describe the Texas Instruments TUSB1046-DCI USB Type-C linear redriver crosspoint switch. This component is used to handle orientation switching and DisplayPort altmode multiplexing for Type-C signals. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Link: https://lore.kernel.org/r/20241024-tusb1046-v2-1-d031b1a43e6d@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-04dt-bindings: usb: add TUSB73x0 PCIeParth Pancholi1-0/+55
Add device tree bindings for TI's TUSB73x0 PCIe-to-USB 3.0 xHCI host controller. The controller supports software configuration through PCIe registers, such as controlling the PWRONx polarity via the USB control register (E0h). Datasheet: https://www.ti.com/lit/ds/symlink/tusb7320.pdf Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241029072444.8827-2-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-02dt-bindings: usb: sunxi-musb: Add A100 compatible stringCody Eksal1-0/+1
The A100 MUSB peripheral has 10 endpoints, and thus is compatible with the A33 version. Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241031070232.1793078-6-masterr3c0rd@epochal.quest Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-11-02dt-bindings: usb: Add A100 compatible stringCody Eksal2-0/+2
The Allwinner A100 contains two fully OHCI/EHCI compatible USB host controllers. Add their compatible strings to the list of generic OHCI/EHCI controllers. Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20241031070232.1793078-5-masterr3c0rd@epochal.quest Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-10-17dt-bindings: usb: add rk3576 compatible to rockchip,dwc3Frank Wang1-1/+5
Add the compatible for the Rockchip RK3576 variant. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20241016083224.14839-1-frawang.cn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11dt-bindings: usb: qcom,dwc3: Add QCS8300 to USB DWC3 bindingsKrishna Kurapati1-0/+4
Update dt-bindings to add QCS8300 to USB DWC3 controller list. The second controller of QCS8300 is High speed only capable and doesn't have ss_phy_irq. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20241009195348.2649368-2-quic_kriskura@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-04dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95Xu Yang1-1/+5
The i.MX95 is compatible with i.MX8MP's usb controller. This will add a compatible string "fsl,imx95-dwc3" for i.MX95. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20240911061720.495606-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-04dt-bindings: usb: renesas,usbhs: Deprecate renesas,enable-gpioGeert Uytterhoeven1-0/+4
Commit 2071d0968e564b4b ("Documentation: gpio: guidelines for bindings") deprecated the "gpio" suffix for GPIO consumers in favor of the "gpios" suffix. Update the Renesas HS-USB DT bindings to reflect this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/e9cf476ffac794bad7b0860dc89afd62a9ebc812.1727853953.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-04dt-bindings: usb: add PIC64GX compatibility to mpfs-musb driverPierre-Henry Moussay1-2/+5
PIC64GX musb is compatible with mpfs-musb, just update compatibility with fallback Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240930095449.1813195-3-pierre-henry.moussay@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-04dt-bindings: usb: cypress,cypd4226: Drop Tegra specific GPIO definesRob Herring (Arm)1-4/+1
The Tegra GPIO define is a problem for the magic code which extracts the examples and fixes up the interrupt provider. This was partially worked around by putting #interrupt-cells in the parent. However, that's incomplete and causes a warning when dtc "interrupt_provider" check is enabled. Just drop the Tegra specific define and simplify the example. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240925173449.1906586-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-04dt-bindings: usb: genesys,gl850g: allow downstream device subnodesIcenowy Zheng1-1/+8
As this binding describes USB hubs, it's natural for them to have downstream devices. Change "additionalProperties" to "unevaluatedProperties" to allow properties defined in usb-device.yaml (for DT cells properties) and add a pattern-based downstream device subnode rule to match those subnodes. These changes allow downstream devices get defined under the hub. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240917094008.283529-1-uwu@icenowy.me Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03Merge 6.11-rc6 into usb-nextGreg Kroah-Hartman1-1/+8
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22dt-bindings: usb: microchip,usb2514: Fix reference USB device schemaAlexander Stein1-1/+8
An USB hub is not a HCD, but an USB device. Fix the referenced schema accordingly. Fixes: bfbf2e4b77e2 ("dt-bindings: usb: Document the Microchip USB2514 hub") Cc: stable@vger.kernel.org Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20240815113132.372542-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22dt-bindings: usb: add layerscape super speed usb supportFrank Li1-0/+52
Add missed binding doc for layerscape dwc3 usb controller. Fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: /soc/usb@3100000: failed to match any schema with compatible: ['fsl,ls1028a-dwc3', 'snps,dwc3'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240815152159.4177782-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22Documentation: msm-hsusb.txt: removeMasanori Ogino1-110/+0
Commit a170a1e9ccc5 ("usb: phy: remove phy-msm-usb.c") removed the device driver but left the corresponding documentation, delete it. Signed-off-by: Masanori Ogino <mogino@acm.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240816090105.13651-2-omasanori@proton.me Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22dt-bindings: usb: qcom,dwc3: Document X1E80100 MP controllerKonrad Dybcio1-0/+3
The X1E80100, just like its predecessors, has a Multiport controller. This time around, 2 HS (eUSB) and 2 SS PHYs are attached. Document it. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com> Link: https://lore.kernel.org/r/20240820-topic-h_mp-v2-1-d88518066372@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-12Merge 6.11-rc3 into usb-nextGreg Kroah-Hartman1-0/+1
We need the usb fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31dt-bindings: usb: qcom,dwc3: Update ipq5332 clock detailsVaradarajan Narayanan1-1/+1
Unlike MSM SoC, IPQ SoC doesn't use RPM to aggregate bandwidth requests and scale the NoC frequency. The NoCs are turned on and set to a specific frequency at boot time and that is used for the lifetime of the system. Hence interconnect was not considered previously. The same approach was used for PCIe and at that point the consensus was to move to interconnect. Hence implemented the ICC driver and updating the existing USB driver to use the ICC driver. USB uses icc-clk framework to enable the NoC interface clock. Hence the 'iface' clock is removed from the list of clocks. Update the clock-names list accordingly. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20240730054817.1915652-3-quic_varada@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31dt-bindings: usb: ti,j721e-usb: fix compatible listThéo Lebrun1-2/+1
Compatible can be A or B+A, not A or B or A+B. B got added afterwards, we want B+A not A+B. A=ti,j721e-usb and B=ti,am64-usb. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240726-s2r-cdns-v5-1-8664bfb032ac@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31dt-bindings: usb: qcom,dwc3: Update ipq5332 interrupt infoVaradarajan Narayanan1-0/+15
IPQ5332 has only three interrupts. Update the constraints to fix the following dt_binding_check errors. interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short Fixes: 53c6d854be4e ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding") Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240723100151.402300-2-quic_varada@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31dt-bindings: usb: microchip,usb2514: Add USB2517 compatibleAlexander Stein1-0/+1
USB2517 is a 7-port variant of this USB hub. Add an USB compatible based on USB vendor & product ID. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240731071950.989113-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-03dt-bindings: usb: Convert fsl-usb to yamlFrank Li2-81/+95
Convert fsl-usb binding doc to yaml format. Additional change: - Remove port0 and port1 from required list. - Use common usb-drd.yaml for dr_mode property - Keep two difference examples. - Add interrupts to required property list. - Remove #address-cells and #size-cells in example. - Use predefined irq type macro. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240627144815.4014179-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-27dt-bindings: usb: dwc2: switch to unevaluatedPropertiesNeil Armstrong1-1/+1
Define "unevaluatedProperties" instead of "additionalProperties" to allow properties from common schemas but still disallow undefined properties. This allow defining a device subnode and fixes: meson-gxbb-odroidc2.dtb: usb@c9100000: '#address-cells', '#size-cells', 'hub@1' do not match any of the regexes: 'p inctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/usb/dwc2.yaml# Fixes: bb88dbbee2c9 ("dt-bindings: usb: dwc2: Add reference to usb-drd.yaml") Fixes: 54bd6c9a3b7b ("dt-bindings: usb: dwc2: document TPL support") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240624-topic-amlogic-upstream-bindings-fixes-dwc2-subnodes-v1-1-f2544f21f594@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-20dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hubAnand Moon1-5/+55
Add the binding example for the USB3.1 Genesys Logic GL3523 integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed hub. For onboard hub controllers that support USB 3.x and USB 2.0 hubs with shared resets and power supplies, this property is used to identify the hubs with which these are shared. GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which serves power to the USB HUB, it uses 5V power regulator. Update the peer-hub description. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Link: https://lore.kernel.org/r/20240613123020.43500-1-linux.amoon@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-20dt-bindings: usb: gpio-sbu-mux: Add an entry for TMUXHS4212Parth Pancholi1-0/+1
Add a compatible entry for the TI TMUXHS4212 GPIO-based bidirectional 2:1 mux/1:2 demux which can be used for switching orientation of the SBU lines in USB Type-C applications. TMUXHS4212 datasheet: https://www.ti.com/lit/ds/symlink/tmuxhs4212.pdf Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240613102913.15714-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-20dt-bindings: usb: qcom,dwc3: Add SC8180X compatiblesBjorn Andersson1-0/+29
The SC8180X platform has two single port DWC3 instances and a two-port DWC3 instance. Add compatibles for these to the binding. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/r/20240610-sc8180x-dwc3-binding-compatible-v2-1-c7d5db9702a2@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-20dt-bindings: usb: cdns,usb3: use common usb-drd yamlFrank Li1-3/+12
Use common usb-drd yaml for usb OTG related propteries to fix below DTB_CHECK warning. arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: 'port', 'usb-role-switch' do not match any of the regexes: 'pinctrl-[0-9]+' Add "port" proptery to use connect type C connector and fix below warning. arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: Unevaluated properties are not allowed ('port' was unexpected) Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240607154119.1543290-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-18Merge tag 'v6.10-rc4' into usb-nextGreg Kroah-Hartman1-0/+1
We need the USB / Thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04dt-bindings: usb: gpio-sbu-mux: Make 'enable-gpios' optionalFrancesco Dolcini1-1/+6
The enable gpio is not required when the SBU mux is used only for orientation, make enable-gpios required only for alternate mode switch use case. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240603083558.9629-2-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04dt-bindings: musb: mpfs: add ULPI external vbus supportConor Dooley1-0/+7
Add a property to allow configuring the musb controller on PolarFire SoC to use an external vbus for ULPI PHYs. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240531-fountain-plating-1d3739422a26@wendy Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on ↵Rob Herring (Arm)1-0/+1
child nodes All nodes need an explicit additionalProperties or unevaluatedProperties unless a $ref has one that's false. As that is not the case with usb-device.yaml, "additionalProperties" is needed here. Fixes: c44d9dab31d6 ("dt-bindings: usb: Add downstream facing ports to realtek binding") Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240523194500.2958192-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-22Merge tag 'usb-6.10-rc1' of ↵Linus Torvalds13-393/+725
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.10-rc1. Nothing hugely earth-shattering, just constant forward progress for hardware support of new devices and cleanups over the drivers. Included in here are: - Thunderbolt / USB 4 driver updates - typec driver updates - dwc3 driver updates - gadget driver updates - uss720 driver id additions and fixes (people use USB->arallel port devices still!) - onboard-hub driver rename and additions for new hardware - xhci driver updates - other small USB driver updates and additions for quirks and api changes All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub usb: fotg210: Add missing kernel doc description usb: dwc3: core: Fix unused variable warning in core driver usb: typec: tipd: rely on i2c_get_match_data() usb: typec: tipd: fix event checking for tps6598x usb: typec: tipd: fix event checking for tps25750 dt-bindings: usb: qcom,dwc3: fix interrupt max items usb: fotg210: Use *-y instead of *-objs in Makefile usb: phy: tegra: Replace of_gpio.h by proper one usb: typec: ucsi: displayport: Fix potential deadlock usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration usb: musc: Remove unused list 'buffers' usb: dwc3: Wait unconditionally after issuing EndXfer command usb: gadget: u_audio: Clear uac pointer when freed. usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind. dt-bindings: usb: dwc3: Add QDU1000 compatible usb: core: Remove the useless struct usb_devmap which is just a bitmap MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry USB: usb_parse_endpoint: ignore reserved bits usb: xhci: compact 'trb_in_td()' arguments ...
2024-05-17Merge tag 'devicetree-for-6.10' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT Bindings: - Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings to schemas - Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0 irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3 linflexuart, and Mediatek MT7988 XHCI - Add 'reg' constraints on DSI and SPI display panels - More dropping of unnecessary quotes in schemas - Use full paths rather than relative paths in schema $refs - Drop redundant storing of phandle for reserved memory DT Core: - Use scope based cleanups for kfree() and of_node_put() - Track interrupt-map and power-supplies for fw_devlink - Add buffer overflow check in of_modalias() - Add and use __of_prop_free() helper for freeing struct property" * tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits) of: property: Add fw_devlink support for interrupt-map property dt-bindings: display: panel: constrain 'reg' in DSI panels dt-bindings: display: panel: constrain 'reg' in SPI panels dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref dt-bindings: Use full path to other schemas dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema of: module: add buffer overflow check in of_modalias() dt-bindings: PCI: microchip: increase number of items in ranges property dt-bindings: Drop unnecessary quotes on keys dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes of: property: Use scope based cleanup on port_node of: reserved_mem: Remove the use of phandle from the reserved_mem APIs of: property: fw_devlink: Add support for "power-supplies" binding dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support dt-bindings: timer: renesas,tmu: Add R-Car V4M support dt-bindings: timer: renesas,cmt: Add R-Car V4M support of: Use scope based of_node_put() cleanups of: Use scope based kfree() cleanups ...
2024-05-13Merge tag 'soc-drivers-6.10' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "As usual, these are updates for drivers that are specific to certain SoCs or firmware running on them. Notable updates include - The new STMicroelectronics STM32 "firewall" bus driver that is used to provide a barrier between different parts of an SoC - Lots of updates for the Qualcomm platform drivers, in particular SCM, which gets a rewrite of its initialization code - Firmware driver updates for Arm FF-A notification interrupts and indirect messaging, SCMI firmware support for pin control and vendor specific interfaces, and TEE firmware interface changes across multiple TEE drivers - A larger cleanup of the Mediatek CMDQ driver and some related bits - Kconfig changes for riscv drivers to prepare for adding Kanaan k230 support - Multiple minor updates for the TI sysc bus driver, memory controllers, hisilicon hccs and more" * tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits) firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G soc: qcom: pmic_glink: Make client-lock non-sleeping dt-bindings: soc: qcom,wcnss: fix bluetooth address example soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234 bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall() bus: etzpc: introduce ETZPC firewall controller driver firmware: arm_ffa: Avoid queuing work when running on the worker queue bus: ti-sysc: Drop legacy idle quirk handling bus: ti-sysc: Drop legacy quirk handling for smartreflex bus: ti-sysc: Drop legacy quirk handling for uarts bus: ti-sysc: Add a description and copyrights bus: ti-sysc: Move check for no-reset-on-init soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute firmware: arm_ffa: Fix memory corruption in ffa_msg_send2() bus: rifsc: introduce RIFSC firewall controller driver of: property: fw_devlink: Add support for "access-controller" soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200 soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS ...
2024-05-10dt-bindings: usb: qcom,dwc3: fix interrupt max itemsJohan Hovold1-2/+2
A recent commit adding the SC8280XP multiport controller to the binding failed to update the interrupt maxItems, which results it DT checker warnings like: arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dtb: usb@a4f8800: interrupts-extended: [[1, 0, 130, 4], [1, 0, 135, 4], [1, 0, 857, 4], [1, 0, 856, 4], [1, 0, 131, 4], [1, 0, 136, 4], [1, 0, 860, 4], [1, 0, 859, 4], [136, 127, 3], [136, 126, 3], [136, 129, 3], [136, 128, 3], [136, 131, 3], [136, 130, 3], [136, 133, 3], [136, 132, 3], [136, 16, 4], [136, 17, 4]] is too long Fixes: 80adfb54044e ("dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport") Reported-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/171502764588.89686.5159158035724685961.robh@kernel.org Link: https://lore.kernel.org/lkml/171449016553.3484108.5214033788092698309.robh@kernel.org/ Cc: Krishna Kurapati <quic_kriskura@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240509083822.397-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04dt-bindings: usb: dwc3: Add QDU1000 compatibleKomal Bajaj1-0/+3
Document the QDU1000 dwc3 compatible. Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240502082017.13777-4-quic_kbajaj@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-30dt-bindings: usb: samsung,exynos-dwc3: add gs101 compatibleAndré Draszik1-0/+18
The Exynos-based Google Tensor gs101 SoC has a DWC3 compatible USB controller and can reuse the existing Exynos glue. Update the dt schema to include the google,gs101-dwusb3 compatible for it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240423-usb-dwc3-gs101-v1-1-2f331f88203f@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 MultiportKrishna Kurapati1-0/+34
Add the compatible string for SC8280 Multiport USB controller from Qualcomm. There are 4 power event interrupts supported by this controller (one for each port of multiport controller). Add all the 4 as non-optional interrupts for SC8280XP-MP Also each port of multiport has one DP and one DM IRQ. Add all DP/DM IRQs related to 4 ports of SC8280XP Teritiary controller. Also added SuperSpeed PHY interrupt for both Superspeed ports. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-6-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23dt-bindings: usb: Add bindings for multiport properties on DWC3 controllerKrishna Kurapati1-6/+7
Add bindings to indicate properties required to support multiport on Synopsys DWC3 controller. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-2-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23dt-bindings: usb: uhci: convert to dt schemaMohammad Shehar Yaar Tausif2-18/+75
Convert USB UHCI bindings to DT schema. Documenting aspeed compatibles and missing properties. Adding aspeed/generic-uhci example and fixing nodename for the original example. Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240423150550.91055-1-sheharyaar48@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23dt-bindings: usb: qcom,pmic-typec: update example to follow connector schemaDmitry Baryshkov1-8/+26
Update Qualcomm PMIC Type-C examples to follow the USB-C connector schema. The USB-C connector should have three ports (USB HS @0, SSTX/RX @1 and SBU @2 lanes). Reorder ports accordingly and add SBU port connected to the SBU mux (e.g. FSA4480). Reported-by: Luca Weiss <luca.weiss@fairphone.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240418-typec-fix-example-v3-1-08f649b6f368@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-22dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatibleXu Yang1-0/+1
Add "fsl,imx8ulp-usbmisc" compatible. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-11dt-bindings: usb: mtk-xhci: add compatible for MT7988Rafał Miłecki1-0/+1
MT7988 SoC contains two on-SoC XHCI controllers. Add proper binding. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240213130044.1976-1-zajec5@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2024-04-09dt-bindings: usb: hx3: Remove unneeded dr_modeFabio Estevam1-1/+0
It is expected that the USB controller works in host mode to have the USB hub operational. Remove such unneeded property from the devicetree example. Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20240405195051.945474-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 20:28:57 +0000