| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
* tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
|
|
The documentation missed the "in_" prefix for this IIO_SHARED_BY_DIR
entry.
Fixes: bf04c1a367e3 ("iio: adc: vf610: implement configurable conversion modes")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/560dc93fafe5ef7e9a409885fd20b6beac3973d8.1653900626.git.baruch@tkos.co.il
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MMIO stale data fixes from Thomas Gleixner:
"Yet another hw vulnerability with a software mitigation: Processor
MMIO Stale Data.
They are a class of MMIO-related weaknesses which can expose stale
data by propagating it into core fill buffers. Data which can then be
leaked using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too"
* tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree fixes from Rob Herring:
- More DT meta-schema check fixes from new bindings in merge window
- Fix stale DT binding references from Mauro
- Update various binding maintainers
- Fix in arm,malidp properties to match reality
- Add deprecated 'atheros' vendor prefix
* tag 'devicetree-fixes-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: arm,malidp: remove bogus RQOS property
dt-bindings: pinctrl: ralink: Fix 'enum' lists with duplicate entries
dt-bindings: Drop more redundant 'maxItems/minItems' in if/then schemas
dt-bindings: nvme: apple,nvme-ans: Drop 'maxItems' from 'apple,sart'
MAINTAINERS: rectify entries for ARM DRM DRIVERS after dt conversion
MAINTAINERS: update snps,axs10x-reset.yaml reference
MAINTAINERS: update dongwoon,dw9807-vcm.yaml reference
MAINTAINERS: update cortina,gemini-ethernet.yaml reference
dt-bindings: mfd: rk808: update rockchip,rk808.yaml reference
dt-bindings: reset: update st,stih407-powerdown.yaml references
dt-bindings: arm: update vexpress-config.yaml references
dt-bindings: interrupt-controller: update brcm,l2-intc.yaml reference
dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference
dt-bindings: update Luca Ceresoli's e-mail address
dt-bindings: msm: update maintainers list with proper id
dt-bindings: vendor-prefixes: document deprecated Atheros
dt-bindings: Update QCOM USB subsystem maintainer information
|
|
The {dma|pio}_mode sysfs files are incorrectly documented as having a
list of the supported DMA/PIO transfer modes, while the corresponding
fields of the *struct* ata_device hold the transfer mode IDs, not masks.
To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs
files are handled by the ata_bitfield_name_match() macro which leads to
reading such kind of nonsense from them:
$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4,
XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1,
XFER_PIO_0
Using the correct ata_bitfield_name_search() macro fixes that:
$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_PIO_4
While fixing the file documentation, somewhat reword the {dma|pio}_mode
file doc and add a note about being mostly useful for PATA devices to
the xfer_mode file doc...
Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Changeset 983b62975e90 ("dt-bindings: mfd: bd9571mwv: Convert to json-schema")
renamed: Documentation/devicetree/bindings/mfd/bd9571mwv.txt
to: Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.
Update its cross-reference accordingly.
Fixes: 983b62975e90 ("dt-bindings: mfd: bd9571mwv: Convert to json-schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1906a4d935eab57c10ce09358eae02175ce4abb7.1654529011.git.mchehab@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec:
- Fix wrong error handling path
- Clean-up patches
cros_ec_chardev:
- Re-introduce cros_ec_cmd_xfer to fix ABI broken
cros_ec_lpcs:
- Support the Framework Laptop
cros_ec_typec:
- Fix NULL dereference
chromeos_acpi:
- Add ChromeOS ACPI device driver
- Fix Sphinx errors when `make htmldocs`
misc:
- Drop BUG_ON()s"
* tag 'tag-chrome-platform-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Use imperative mood for ChromeOS ACPI sysfs ABI descriptions
platform/chrome: Use tables for values lists of ChromeOS ACPI sysfs ABI
platform/chrome: cros_ec_spi: drop BUG_ON() if `din` isn't large enough
platform/chrome: cros_ec_spi: drop unneeded BUG_ON()
platform/chrome: cros_ec_i2c: drop BUG_ON() in cros_ec_pkt_xfer_i2c()
platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_get_host_event()
platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_prepare_tx()
platform/chrome: correct cros_ec_prepare_tx() usage
platform/chrome: cros_ec_proto: drop unneeded BUG_ON() in prepare_packet()
platform/chrome: Add ChromeOS ACPI device driver
platform/chrome: cros_ec_typec: Check for EC driver
platform/chrome: cros_ec_lpcs: reserve the MEC LPC I/O ports first
platform/chrome: cros_ec_lpcs: detect the Framework Laptop
platform/chrome: Re-introduce cros_ec_cmd_xfer and use it for ioctls
platform/chrome: cros_ec: append newline to all logs
platform/chrome: cros_ec: sort header inclusion alphabetically
platform/chrome: cros_ec: determine `wake_enabled` in cros_ec_suspend()
platform/chrome: cros_ec: remove unused variable `was_wake_device`
platform/chrome: cros_ec: fix error handling in cros_ec_register()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
|
Pull SCSI updates from James Bottomley:
"This consists of a small set of driver updates (lpfc, ufs, mpt3sas
mpi3mr, iscsi target). Apart from that this is mostly small fixes with
very few core changes (the biggest one being VPD caching)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
scsi: elx: efct: Remove NULL check after calling container_of()
scsi: dpt_i2o: Drop redundant spinlock initialization
scsi: qedf: Remove redundant variable op
scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
scsi: fnic: Replace DMA mask of 64 bits with 47 bits
scsi: mpi3mr: Add target device related sysfs attributes
scsi: mpi3mr: Add shost related sysfs attributes
scsi: elx: efct: Remove redundant memset() statement
scsi: megaraid_sas: Remove redundant memset() statement
scsi: mpi3mr: Return error if dma_alloc_coherent() fails
scsi: hisi_sas: Fix rescan after deleting a disk
scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
scsi: libsas: Refactor sas_ata_hard_reset()
scsi: mpt3sas: Update driver version to 42.100.00.00
scsi: mpt3sas: Fix junk chars displayed while printing ChipName
scsi: ipr: Use kobj_to_dev()
scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is mostly a drivers update including a couple of new drivers but
we do have some fixes and improvements to the core as well.
- Make sure we don't log spuriously about uncontrollable regulators.
- Don't use delays when we should use sleeps for regulators with
larger ramp times.
- Support for MediaTek MT6358 and MT6366, Richtek RT5759 and Silicon
Mitus SM5703"
* tag 'regulator-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
regulator: scmi: Fix refcount leak in scmi_regulator_probe
regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt
regulator: qcom_smd: Fix up PM8950 regulator configuration
regulator: core: Fix enable_count imbalance with EXCLUSIVE_GET
regulator: core: Add error flags to sysfs attributes
regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A
regulator: dt-bindings: qcom,rpmh: document supplies per variant
regulator: dt-bindings: qcom,rpmh: update maintainers
regulator: mt6315: Enforce regulator-compatible, not name
regulator: pca9450: Enable DVS control via PMIC_STBY_REQ
regulator: pca9450: Make warm reset on WDOG_B assertion
regulator: Add property for WDOG_B warm reset
regulator: pca9450: Make I2C Level Translator configurable
regulator: Add property for I2C level shifter
regulator: sm5703: Correct reference to the common regulator schema
regulator: sm5703-regulator: Add regulators support for SM5703 MFD
dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators
regulator: richtek,rt4801: parse GPIOs per regulator
regulator: dt-bindings: richtek,rt4801: use existing ena_gpiod feature
regulator: core: Sleep (not delay) in set_voltage()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for including fs-verity file digests and signatures
in the IMA measurement list as well as verifying the fs-verity file
digest based signatures, both based on policy.
In addition, are two bug fixes:
- avoid reading UEFI variables, which cause a page fault, on Apple
Macs with T2 chips.
- remove the original "ima" template Kconfig option to address a boot
command line ordering issue.
The rest is a mixture of code/documentation cleanup"
* tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Fix sparse warnings in keyring_handler
evm: Clean up some variables
evm: Return INTEGRITY_PASS for enum integrity_status value '0'
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
fsverity: update the documentation
ima: support fs-verity file digest based version 3 signatures
ima: permit fsverity's file digests in the IMA measurement list
ima: define a new template field named 'd-ngv2' and templates
fs-verity: define a function to return the integrity protected file digest
ima: use IMA default hash algorithm for integrity violations
ima: fix 'd-ng' comments and documentation
ima: remove the IMA_TEMPLATE Kconfig option
ima: remove redundant initialization of pointer 'file'.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- decouple the PV interface from kernel internals in the Xen
scsifront/scsiback pv drivers
- harden the Xen scsifront PV driver against a malicious backend driver
- simplify Xen PV frontend driver ring page setup
- support Xen setups with multiple domains created at boot time to
tolerate Xenstore coming up late
- two small cleanup patches
* tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
xen: add support for initializing xenstore later as HVM domain
xen: sync xs_wire.h header with upstream xen
x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid
xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent
xen/xenbus: eliminate xenbus_grant_ring()
xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/xenbus: add xenbus_setup_ring() service function
xen: update ring.h
xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF
xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF
xen/sound: switch xen_snd_front to use INVALID_GRANT_REF
xen/drm: switch xen_drm_front to use INVALID_GRANT_REF
xen/usb: switch xen-hcd to use INVALID_GRANT_REF
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"This includes some small changes to kernel/stop_machine.c and arch/x86
which are deps of the new Intel IFS support.
Highlights:
- New drivers:
- Intel "In Field Scan" (IFS) support
- Winmate FM07/FM07P buttons
- Mellanox SN2201 support
- AMD PMC driver enhancements
- Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (54 commits)
platform/x86/intel/ifs: Add CPU_SUP_INTEL dependency
platform/x86: intel_cht_int33fe: Set driver data
platform/x86: intel-hid: fix _DSM function index handling
platform/x86: toshiba_acpi: use kobj_to_dev()
platform/x86: samsung-laptop: use kobj_to_dev()
platform/x86: gigabyte-wmi: Add support for Z490 AORUS ELITE AC and X570 AORUS ELITE WIFI
tools/power/x86/intel-speed-select: Fix warning for perf_cap.cpu
tools/power/x86/intel-speed-select: Display error on turbo mode disabled
Documentation: In-Field Scan
platform/x86/intel/ifs: add ABI documentation for IFS
trace: platform/x86/intel/ifs: Add trace point to track Intel IFS operations
platform/x86/intel/ifs: Add IFS sysfs interface
platform/x86/intel/ifs: Add scan test support
platform/x86/intel/ifs: Authenticate and copy to secured memory
platform/x86/intel/ifs: Check IFS Image sanity
platform/x86/intel/ifs: Read IFS firmware image
platform/x86/intel/ifs: Add stub driver for In-Field Scan
stop_machine: Add stop_core_cpuslocked() for per-core operations
x86/msr-index: Define INTEGRITY_CAPABILITIES MSR
x86/microcode/intel: Expose collect_cpu_info_early() for IFS
...
|
|
The current descriptions all begin with ("This file shows something")
clause, which is incorrect wording since these mean return value from
sysfs.
Use imperative mood ("Returns something") instead, in line with
corresponding ACPI documentation at firmware-guide/.
Cc: Benson Leung <bleung@google.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Linux Next Mailing List <linux-next@vger.kernel.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220518083524.37380-3-bagasdotme@gmail.com
|
|
Stephen Rothwell reported htmldocs warning when merging chrome-platform
tree:
Documentation/ABI/testing/sysfs-driver-chromeos-acpi:2: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-chromeos-acpi:11: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-chromeos-acpi:22: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-chromeos-acpi:56: WARNING: Unexpected indentation.
The warning is due to missing blank line separator surrounding values
lists.
Instead of using lists, use tables to be consistent with rest of sysfs
ABI documentation.
Link: https://lore.kernel.org/linux-next/20220516213832.19127535@canb.auug.org.au/
Fixes: 0a4cad9c11ad ("platform/chrome: Add ChromeOS ACPI device driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benson Leung <bleung@google.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Linux Next Mailing List <linux-next@vger.kernel.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220518083524.37380-2-bagasdotme@gmail.com
[tzungbi: fix the Fixes tag to 12-chars hash.]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Allow runtime services to be re-enabled at boot on RT kernels.
- Provide access to secrets injected into the boot image by CoCo
hypervisors (COnfidential COmputing)
- Use DXE services on x86 to make the boot image executable after
relocation, if needed.
- Prefer mirrored memory for randomized allocations.
- Only randomize the placement of the kernel image on arm64 if the
loader has not already done so.
- Add support for obtaining the boot hartid from EFI on RISC-V.
* tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
efi: stub: prefer mirrored memory for randomized allocations
efi/arm64: libstub: run image in place if randomized by the loader
efi: libstub: pass image handle to handle_kernel_image()
efi: x86: Set the NX-compatibility flag in the PE header
efi: libstub: ensure allocated memory to be executable
efi: libstub: declare DXE services table
efi: Add missing prototype for efi_capsule_setup_info
docs: security: Add secrets/coco documentation
efi: Register efi_secret platform device if EFI secret area is declared
virt: Add efi_secret module to expose confidential computing secrets
efi: Save location of EFI confidential computing area
efi: Allow to enable EFI runtime services by default on RT
|
|
Add the ability to scrub the device memory with a given value.
Add file 'dram_mem_scrub_val' to set the value
and a file 'dram_mem_scrub' to scrub the dram.
This is very important to help during automated tests, when you want
the CI system to randomize the memory before training certain
DL topologies.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When Gaudi device is secured the monitors data in the configuration
space is blocked from PCI access.
As we need to enable user to get sync-manager monitors registers when
debugging, this patch adds a debugfs that dumps the information to a
binary file (blob).
When a root user will trigger the dump, the driver will send request to
the f/w to fill a data structure containing dump of all monitors
registers.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the sysfs reporting file for Processor MMIO Stale Data
vulnerability. It exposes the vulnerability and mitigation state similar
to the existing files for the other hardware vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.19 merge window
This includes following Thunderbolt/USB4 changes for the v5.19 merge
window:
* Improvements for Thunderbolt 1 DisplayPort tunneling
* Link USB4 ports to their USB Type-C connectors
* Lane bonding support for host-to-host (XDomain) connections
* Buffer allocation improvement for devices with no DisplayPort
adapters
* Few cleanups and minor fixes.
All these have been in linux-next with no reported issues except that
there is a minor merge conflict with the kunit-next tree because one of
the commits touches the driver KUnit tests.
* tag 'thunderbolt-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add KUnit test for devices with no DisplayPort adapters
thunderbolt: Fix buffer allocation of devices with no DisplayPort adapters
thunderbolt: Add support for XDomain lane bonding
thunderbolt: Ignore port locked error in tb_port_wait_for_link_width()
thunderbolt: Split setting link width and lane bonding into own functions
thunderbolt: Move tb_port_state() prototype to correct place
thunderbolt: Add debug logging when lane is enabled/disabled
thunderbolt: Link USB4 ports to their USB Type-C connectors
misc/mei: Add NULL check to component match callback functions
thunderbolt: Use different lane for second DisplayPort tunnel
thunderbolt: Dump path config space entries during discovery
thunderbolt: Use decimal number with port numbers
thunderbolt: Fix typo in comment
thunderbolt: Replace usage of found with dedicated list iterator variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-work-next
Manivannan writes:
MHI changes for v5.19
MHI Host
--------
Support for new modems:
- Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
- Telit FN980 v1 based on SDX55
- Telit FN990 based on SDX65
- Foxconn T99W373/T99W368 based on SDX62/SDX65
Core changes:
- During the recycle of event ring elements, compute the ctxt_wp based on the
local cached value instead of reading from shared memory. This is to prevent
the possible corruption of the ctxt_wp as some of the endpoint devices could
modify the value in shared memory.
- Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
spec allows the host to hard reset the device in the case of an unrecoverable
error and all other reset mechanisms have failed.
- During MHI shutdown, wait for the endpoint device to enter the ready state
post reset before proceeding. This is to avoid a possible race where host
would remove the interrupt handler and device will send ready state
interrupt, resulting in IOMMU fault.
- Bail out updating the MHI register if the read has failed during
read/modify/write.
- Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
register fields in mhi_init_mmio().
MAINTAINERS change:
- Since Qualcomm has moved the email domain for its employess from codeaurora
domain to quicinc, update the same for Hemant.
* tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (29 commits)
bus: mhi: host: Add support for Foxconn T99W373 and T99W368
bus: mhi: host: pci_generic: add Telit FN990
bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
bus: mhi: host: Add support for Cinterion MV32-WA/MV32-WB
bus: mhi: host: Optimize and update MMIO register write method
bus: mhi: host: Bail on writing register fields if read fails
bus: mhi: host: Wait for ready state after reset
bus: mhi: host: Add soc_reset sysfs
bus: mhi: host: pci_generic: Sort mhi_pci_id_table based on the PID
bus: mhi: host: Use cached values for calculating the shared write pointer
MAINTAINERS: Update Hemant's email id
bus: mhi: ep: Add uevent support for module autoloading
bus: mhi: ep: Add support for suspending and resuming channels
bus: mhi: ep: Add support for queueing SKBs to the host
bus: mhi: ep: Add support for processing channel rings
bus: mhi: ep: Add support for reading from the host
bus: mhi: ep: Add support for processing command rings
bus: mhi: ep: Add support for handling SYS_ERR condition
bus: mhi: ep: Add support for handling MHI_RESET
bus: mhi: ep: Add support for powering down the MHI endpoint stack
...
|
|
and feature_persistent
SeongJae is currently listed as a contact point for some blk{back,front}
features, but he will not work for XEN for a while. This commit
therefore updates the contact point to his colleague, Maximilian, who is
understanding the context and actively working with the features now.
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20220420072734.1692-1-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
'commit'
This commit documents the newly added 'state' sysfs file input keyword,
'commit', which allows online tuning of DAMON contexts.
Link: https://lkml.kernel.org/r/20220429160606.127307-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit documents the user space support of the newly added monitoring
operations set for fixed virtual address ranges monitoring, namely
'fvaddr', on the ABI and usage documents for DAMON.
Link: https://lkml.kernel.org/r/20220426231750.48822-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit updates the DAMON ABI and usage documents for the new sysfs
file, 'avail_operations'.
Link: https://lkml.kernel.org/r/20220426203843.45238-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The x86 Chromebooks have the ChromeOS ACPI device. This driver attaches
to the ChromeOS ACPI device and exports the values reported by ACPI in a
sysfs directory. This data isn't present in ACPI tables when read
through ACPI tools, hence a driver is needed to do it. The driver gets
data from firmware using the ACPI component of the kernel. The ACPI values
are presented in string form (numbers as decimal values) or binary
blobs, and can be accessed as the contents of the appropriate read only
files in the standard ACPI device's sysfs directory tree. This data is
consumed by the ChromeOS user space.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yn4OKYrtV35Dv+nd@debian-BULLSEYE-live-builder-AMD64
|
|
Add the sysfs attributes in ABI/testing for In-Field Scan.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220506225410.1652287-12-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add documentation for the new attributes:
- "phy_reset" - Reset PHY.
- "mac_reset" - Reset MAC.
- "qsfp_pwr_good" - The power status of QSFP ports.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220430115809.54565-4-michaelsh@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
According to the documentation of the sysfs nodes rb_noti_cnt,
rb_active_cnt and rb_inactive_cnt, these are all related to HPB
recommendation in UPIU response packet. 'rcmd' (recommendation) should be
the correct abbreviation.
Change the sysfs documentation about these sysfs nodes to highlight what
they mean under different HPB control modes.
Link: https://lore.kernel.org/r/20220505134707.35929-5-huobean@gmail.com
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
IMA may verify a file's integrity against a "good" value stored in the
'security.ima' xattr or as an appended signature, based on policy. When
the "good value" is stored in the xattr, the xattr may contain a file
hash or signature. In either case, the "good" value is preceded by a
header. The first byte of the xattr header indicates the type of data
- hash, signature - stored in the xattr. To support storing fs-verity
signatures in the 'security.ima' xattr requires further differentiating
the fs-verity signature from the existing IMA signature.
In addition the signatures stored in 'security.ima' xattr, need to be
disambiguated. Instead of directly signing the fs-verity digest, a new
signature format version 3 is defined as the hash of the ima_file_id
structure, which identifies the type of signature and the digest.
The IMA policy defines "which" files are to be measured, verified, and/or
audited. For those files being verified, the policy rules indicate "how"
the file should be verified. For example to require a file be signed,
the appraise policy rule must include the 'appraise_type' option.
appraise_type:= [imasig] | [imasig|modsig] | [sigv3]
where 'imasig' is the original or signature format v2 (default),
where 'modsig' is an appended signature,
where 'sigv3' is the signature format v3.
The policy rule must also indicate the type of digest, if not the IMA
default, by first specifying the digest type:
digest_type:= [verity]
The following policy rule requires fsverity signatures. The rule may be
constrained, for example based on a fsuuid or LSM label.
appraise func=BPRM_CHECK digest_type=verity appraise_type=sigv3
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Permit fsverity's file digest (a hash of struct fsverity_descriptor) to
be included in the IMA measurement list, based on the new measurement
policy rule 'digest_type=verity' option.
To differentiate between a regular IMA file hash from an fsverity's
file digest, use the new d-ngv2 format field included in the ima-ngv2
template.
The following policy rule requires fsverity file digests and specifies
the new 'ima-ngv2' template, which contains the new 'd-ngv2' field. The
policy rule may be constrained, for example based on a fsuuid or LSM
label.
measure func=FILE_CHECK digest_type=verity template=ima-ngv2
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Merge master into next, to bring in commit 5f24d5a579d1 ("mm, hugetlb:
allow for "high" userspace addresses"), which is needed as a
prerequisite for the series converting powerpc to the generic mmap
logic.
|
|
If a regulator provides a get_error_flags() operation, its sysfs
attributes will now include an entry for each defined
REGULATOR_ERROR_* flag.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20220504065252.6955-3-zev@bewilderbeest.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove repeated words: "the the lowest" and "this this kernel"
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211006155017.135592-1-sohaib.amhmd@gmail.com
|
|
This reverts commit 0298b4b95cb373c21e6323c905589f8dac42c5b4.
The series still has built errors as reported in linux-next, so revert
it for now.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here, and this resolves a merge issue in
drivers/usb/dwc3/drd.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the kernfs/driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Creating a symlink pointing to the correct USB Type-C
connector for the on-board USB4 ports when they are created.
The link will be created only if the firmware is able to
describe the connection between the port and its connector.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Won Chung <wonchung@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
When ACPI table includes _PLD fields for a device, create a new
directory (physical_location) in sysfs to share _PLD fields.
Currently without PLD information, when there are multiple of same
devices, it is hard to distinguish which device corresponds to which
physical device at which location. For example, when there are two Type
C connectors, it is hard to find out which connector corresponds to the
Type C port on the left panel versus the Type C port on the right panel.
With PLD information provided, we can determine which specific device at
which location is doing what.
_PLD output includes much more fields, but only generic fields are added
and exposed to sysfs, so that non-ACPI devices can also support it in
the future. The minimal generic fields needed for locating a device are
the following.
- panel
- vertical_position
- horizontal_position
- dock
- lid
Signed-off-by: Won Chung <wonchung@google.com>
Link: https://lore.kernel.org/r/20220314195458.271430-1-wonchung@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Note: the current series only supports hubs connected directly to
a root hub, support for other configurations could be added if
needed.
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220217104219.v21.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add additional sysfs nodes to monitor the transfer of firmware upload data
to the target device:
cancel: Write 1 to cancel the data transfer
error: Display error status for a failed firmware upload
remaining_size: Display the remaining amount of data to be transferred
status: Display the progress of the firmware upload
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-6-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend the firmware subsystem to support a persistent sysfs interface that
userspace may use to initiate a firmware update. For example, FPGA based
PCIe cards load firmware and FPGA images from local FLASH when the card
boots. The images in FLASH may be updated with new images provided by the
user at his/her convenience.
A device driver may call firmware_upload_register() to expose persistent
"loading" and "data" sysfs files. These files are used in the same way as
the fallback sysfs "loading" and "data" files. When 0 is written to
"loading" to complete the write of firmware data, the data is transferred
to the lower-level driver using pre-registered call-back functions. The
data transfer is done in the context of a kernel worker thread.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-5-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MHI bus supports a standardized hardware reset, which is known as the
"SoC Reset". This reset is similar to the reset sysfs for PCI devices -
a hardware mechanism to reset the state back to square one.
The MHI SoC Reset is described in the spec as a reset of last resort. If
some unrecoverable error has occurred where other resets have failed, SoC
Reset is the "big hammer" that ungracefully resets the device. This is
effectivly the same as yanking the power on the device, and reapplying it.
However, depending on the nature of the particular issue, the underlying
transport link may remain active and configured. If the link remains up,
the device will flag a MHI system error early in the boot process after
the reset is executed, which allows the MHI bus to process a fatal error
event, and clean up appropiately.
While the SoC Reset is generally intended as a means of recovery when all
else has failed, it can be useful in non-error scenarios. For example,
if the device loads firmware from the host filesystem, the device may need
to be fully rebooted inorder to pick up the new firmware. In this
scenario, the system administrator may use the soc_reset sysfs to cause
the device to pick up the new firmware that the admin placed on the
filesystem.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Bhaumik Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1650302327-30439-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add a configfs entry, "function_name", to change the iInterface field
for VideoControl. This name is used on host devices for user selection,
useful when multiple cameras are present. The default will remain "UVC
Camera".
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220401160447.5919-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"One patch to fix a use-after-free race related to the on-stack
z_erofs_decompressqueue, which happens very rarely but needs to be
fixed properly soon.
The other patch fixes some sysfs Sphinx warnings"
* tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors
erofs: fix use-after-free of on-stack io[]
|
