Merge 5.18-rc5 into usb-next

We need the USB fixes in here, and this resolves a merge issue in
drivers/usb/dwc3/drd.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 39 insertions, 32 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes
index 05820365f1ec..4cdba3477176 100644
--- a/Documentation/ABI/testing/sysfs-class-firmware-attributes
+++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes
@@ -116,7 +116,7 @@ Description:
 					    <value>[ForceIf:<attribute>=<value>]
 					    <value>[ForceIfNot:<attribute>=<value>]
 
-					For example:
+					For example::
 
 					    LegacyOrom/dell_value_modifier has value:
 						    Disabled[ForceIf:SecureBoot=Enabled]
@@ -212,7 +212,7 @@ Description:
 		the next boot.
 
 		Lenovo specific class extensions
-		------------------------------
+		--------------------------------
 
 		On Lenovo systems the following additional settings are available:
 
@@ -246,9 +246,7 @@ Description:
 					that is being referenced (e.g hdd0, hdd1 etc)
 					This attribute defaults to device 0.
 
-		certificate:
-		signature:
-		save_signature:
+		certificate, signature, save_signature:
 					These attributes are used for certificate based authentication. This is
 					used in conjunction with a signing server as an alternative to password
 					based authentication.
@@ -257,22 +255,27 @@ Description:
 					The attributes can be displayed to check the stored value.
 
 					Some usage examples:
-					Installing a certificate to enable feature:
-						echo <supervisor password > authentication/Admin/current_password
-						echo <signed certificate> > authentication/Admin/certificate
 
-					Updating the installed certificate:
-						echo <signature> > authentication/Admin/signature
-						echo <signed certificate> > authentication/Admin/certificate
+						Installing a certificate to enable feature::
+
+							echo "supervisor password" > authentication/Admin/current_password
+							echo "signed certificate" > authentication/Admin/certificate
+
+						Updating the installed certificate::
+
+							echo "signature" > authentication/Admin/signature
+							echo "signed certificate" > authentication/Admin/certificate
 
-					Removing the installed certificate:
-						echo <signature> > authentication/Admin/signature
-						echo '' > authentication/Admin/certificate
+						Removing the installed certificate::
 
-					Changing a BIOS setting:
-						echo <signature> > authentication/Admin/signature
-						echo <save signature> > authentication/Admin/save_signature
-						echo Enable > attribute/PasswordBeep/current_value
+							echo "signature" > authentication/Admin/signature
+							echo "" > authentication/Admin/certificate
+
+						Changing a BIOS setting::
+
+							echo "signature" > authentication/Admin/signature
+							echo "save signature" > authentication/Admin/save_signature
+							echo Enable > attribute/PasswordBeep/current_value
 
 					You cannot enable certificate authentication if a supervisor password
 					has not been set.
@@ -288,9 +291,10 @@ Description:
 		certificate_to_password:
 					Write only attribute used to switch from certificate based authentication
 					back to password based.
-					Usage:
-						echo <signature> > authentication/Admin/signature
-						echo <password> > authentication/Admin/certificate_to_password
+					Usage::
+
+						echo "signature" > authentication/Admin/signature
+						echo "password" > authentication/Admin/certificate_to_password
 
 
 What:		/sys/class/firmware-attributes/*/attributes/pending_reboot
@@ -345,7 +349,7 @@ Description:
 
 		    # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios
 		    # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios
-		    # builtinsafe lastknowngood [factory] custom
+		    builtinsafe lastknowngood [factory] custom
 
 		Note that any changes to this attribute requires a reboot
 		for changes to take effect.
diff --git a/Documentation/ABI/testing/sysfs-driver-intel_sdsi b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
index ab122125ff9a..96b92c105ec4 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel_sdsi
+++ b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
@@ -13,17 +13,19 @@ Description:
 		Should the operation fail, one of the following error codes
 		may be returned:
 
+		==========	=====
 		Error Code	Cause
-	        ----------	-----
-	        EIO		General mailbox failure. Log may indicate cause.
-	        EBUSY		Mailbox is owned by another agent.
-	        EPERM		SDSI capability is not enabled in hardware.
-	        EPROTO		Failure in mailbox protocol detected by driver.
+		==========	=====
+		EIO		General mailbox failure. Log may indicate cause.
+		EBUSY		Mailbox is owned by another agent.
+		EPERM		SDSI capability is not enabled in hardware.
+		EPROTO		Failure in mailbox protocol detected by driver.
 				See log for details.
-	        EOVERFLOW	For provision commands, the size of the data
+		EOVERFLOW	For provision commands, the size of the data
 				exceeds what may be written.
-	        ESPIPE		Seeking is not allowed.
-	        ETIMEDOUT	Failure to complete mailbox transaction in time.
+		ESPIPE		Seeking is not allowed.
+		ETIMEDOUT	Failure to complete mailbox transaction in time.
+		==========	=====
 
 What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/guid
 Date:		Feb 2022
diff --git a/Documentation/ABI/testing/sysfs-fs-erofs b/Documentation/ABI/testing/sysfs-fs-erofs
index 05482374a741..bb4681a01811 100644
--- a/Documentation/ABI/testing/sysfs-fs-erofs
+++ b/Documentation/ABI/testing/sysfs-fs-erofs
@@ -9,8 +9,9 @@ Description:	Shows all enabled kernel features.
 What:		/sys/fs/erofs/<disk>/sync_decompress
 Date:		November 2021
 Contact:	"Huang Jianan" <huangjianan@oppo.com>
-Description:	Control strategy of sync decompression
+Description:	Control strategy of sync decompression:
+
 		- 0 (default, auto): enable for readpage, and enable for
-				     readahead on atomic contexts only,
+		  readahead on atomic contexts only.
 		- 1 (force on): enable for readpage and readahead.
 		- 2 (force off): disable for all situations.