diff options
Diffstat (limited to 'sound/soc/intel/atom/sst-atom-controls.c')
-rw-r--r-- | sound/soc/intel/atom/sst-atom-controls.c | 65 |
1 files changed, 45 insertions, 20 deletions
diff --git a/sound/soc/intel/atom/sst-atom-controls.c b/sound/soc/intel/atom/sst-atom-controls.c index 69f3af4524ab..ff42f629b035 100644 --- a/sound/soc/intel/atom/sst-atom-controls.c +++ b/sound/soc/intel/atom/sst-atom-controls.c @@ -61,8 +61,13 @@ static int sst_fill_and_send_cmd_unlocked(struct sst_data *drv, /** * sst_fill_and_send_cmd - generate the IPC message and send it to the FW - * @ipc_msg: type of IPC (CMD, SET_PARAMS, GET_PARAMS) - * @cmd_data: the IPC payload + * @drv: sst_data + * @ipc_msg: type of IPC (CMD, SET_PARAMS, GET_PARAMS) + * @block: block index + * @task_id: task index + * @pipe_id: pipe index + * @cmd_data: the IPC payload + * @len: length of data to be sent */ static int sst_fill_and_send_cmd(struct sst_data *drv, u8 ipc_msg, u8 block, u8 task_id, u8 pipe_id, @@ -78,7 +83,7 @@ static int sst_fill_and_send_cmd(struct sst_data *drv, return ret; } -/** +/* * tx map value is a bitfield where each bit represents a FW channel * * 3 2 1 0 # 0 = codec0, 1 = codec1 @@ -90,7 +95,7 @@ static u8 sst_ssp_tx_map[SST_MAX_TDM_SLOTS] = { 0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80, /* default rx map */ }; -/** +/* * rx map value is a bitfield where each bit represents a slot * * 76543210 # 0 = slot 0, 1 = slot 1 @@ -101,7 +106,7 @@ static u8 sst_ssp_rx_map[SST_MAX_TDM_SLOTS] = { 0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80, /* default tx map */ }; -/** +/* * NOTE: this is invoked with lock held */ static int sst_send_slot_map(struct sst_data *drv) @@ -145,7 +150,8 @@ static int sst_slot_enum_info(struct snd_kcontrol *kcontrol, /** * sst_slot_get - get the status of the interleaver/deinterleaver control - * + * @kcontrol: control pointer + * @ucontrol: User data * Searches the map where the control status is stored, and gets the * channel/slot which is currently set for this enumerated control. Since it is * an enumerated control, there is only one possible value. @@ -197,7 +203,8 @@ static int sst_check_and_send_slot_map(struct sst_data *drv, struct snd_kcontrol /** * sst_slot_put - set the status of interleaver/deinterleaver control - * + * @kcontrol: control pointer + * @ucontrol: User data * (de)interleaver controls are defined in opposite sense to be user-friendly * * Instead of the enum value being the value written to the register, it is the @@ -280,7 +287,9 @@ static int sst_send_algo_cmd(struct sst_data *drv, /** * sst_find_and_send_pipe_algo - send all the algo parameters for a pipe - * + * @drv: sst_data + * @pipe: string identifier + * @ids: list of algorithms * The algos which are in each pipeline are sent to the firmware one by one * * Called with lock held @@ -379,11 +388,15 @@ static int sst_gain_ctl_info(struct snd_kcontrol *kcontrol, /** * sst_send_gain_cmd - send the gain algorithm IPC to the FW - * @gv: the stored value of gain (also contains rampduration) - * @mute: flag that indicates whether this was called from the - * digital_mute callback or directly. If called from the - * digital_mute callback, module will be muted/unmuted based on this - * flag. The flag is always 0 if called directly. + * @drv: sst_data + * @gv:the stored value of gain (also contains rampduration) + * @task_id: task index + * @loc_id: location/position index + * @module_id: module index + * @mute: flag that indicates whether this was called from the + * digital_mute callback or directly. If called from the + * digital_mute callback, module will be muted/unmuted based on this + * flag. The flag is always 0 if called directly. * * Called with sst_data.lock held * @@ -544,9 +557,12 @@ static const uint swm_mixer_input_ids[SST_SWM_INPUT_COUNT] = { /** * fill_swm_input - fill in the SWM input ids given the register + * @cmpnt: ASoC component + * @swm_input: array of swm_input_ids + * @reg: the register value is a bit-field inicated which mixer inputs are ON. * - * The register value is a bit-field inicated which mixer inputs are ON. Use the - * lookup table to get the input-id and fill it in the structure. + * Use the lookup table to get the input-id and fill it in the + * structure. */ static int fill_swm_input(struct snd_soc_component *cmpnt, struct swm_input_ids *swm_input, unsigned int reg) @@ -577,7 +593,7 @@ static int fill_swm_input(struct snd_soc_component *cmpnt, } -/** +/* * called with lock held */ static int sst_set_pipe_gain(struct sst_ids *ids, @@ -707,7 +723,7 @@ SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_pcm2_controls); SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_sprot_l0_controls); SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_media_l1_controls); SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_media_l2_controls); -SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_voip_controls); +SST_SBA_DECLARE_MIX_CONTROLS(__maybe_unused sst_mix_voip_controls); SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_codec0_controls); SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_codec1_controls); SST_SBA_DECLARE_MIX_CONTROLS(sst_mix_modem_controls); @@ -881,7 +897,7 @@ int sst_fill_ssp_config(struct snd_soc_dai *dai, unsigned int fmt) return 0; } -/** +/* * sst_ssp_config - contains SSP configuration for media UC * this can be overwritten by set_dai_xxx APIs */ @@ -1300,6 +1316,9 @@ static bool is_sst_dapm_widget(struct snd_soc_dapm_widget *w) /** * sst_send_pipe_gains - send gains for the front-end DAIs + * @dai: front-end dai + * @stream: direction + * @mute: boolean indicating mute status * * The gains in the pipes connected to the front-ends are muted/unmuted * automatically via the digital_mute() DAPM callback. This function sends the @@ -1357,7 +1376,9 @@ int sst_send_pipe_gains(struct snd_soc_dai *dai, int stream, int mute) /** * sst_fill_module_list - populate the list of modules/gains for a pipe - * + * @kctl: kcontrol pointer + * @w: dapm widget + * @type: widget type * * Fills the widget pointer in the kcontrol private data, and also fills the * kcontrol pointer in the widget private data. @@ -1403,7 +1424,8 @@ static int sst_fill_module_list(struct snd_kcontrol *kctl, /** * sst_fill_widget_module_info - fill list of gains/algos for the pipe - * @widget: pipe modelled as a DAPM widget + * @w: pipe modeled as a DAPM widget + * @component: ASoC component * * Fill the list of gains/algos for the widget by looking at all the card * controls and comparing the name of the widget with the first part of control @@ -1463,6 +1485,8 @@ static int sst_fill_widget_module_info(struct snd_soc_dapm_widget *w, /** * sst_fill_linked_widgets - fill the parent pointer for the linked widget + * @component: ASoC component + * @ids: sst_ids array */ static void sst_fill_linked_widgets(struct snd_soc_component *component, struct sst_ids *ids) @@ -1480,6 +1504,7 @@ static void sst_fill_linked_widgets(struct snd_soc_component *component, /** * sst_map_modules_to_pipe - fill algo/gains list for all pipes + * @component: ASoC component */ static int sst_map_modules_to_pipe(struct snd_soc_component *component) { |