diff options
Diffstat (limited to 'drivers')
72 files changed, 794 insertions, 682 deletions
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index c7288e1fa3a2..00de463268a8 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -204,7 +204,7 @@ static u32 atl1c_wait_until_idle(struct atl1c_hw *hw, u32 modu_ctrl) /** * atl1c_phy_config - Timer Call-back - * @data: pointer to netdev cast into an unsigned long + * @t: timer list containing pointer to netdev cast into an unsigned long */ static void atl1c_phy_config(struct timer_list *t) { @@ -346,6 +346,7 @@ static void atl1c_del_timer(struct atl1c_adapter *adapter) /** * atl1c_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure + * @txqueue: index of hanging tx queue */ static void atl1c_tx_timeout(struct net_device *netdev, unsigned int txqueue) { @@ -846,6 +847,7 @@ static inline void atl1c_clean_buffer(struct pci_dev *pdev, /** * atl1c_clean_tx_ring - Free Tx-skb * @adapter: board private structure + * @type: type of transmit queue */ static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter, enum atl1c_trans_queue type) @@ -1861,6 +1863,8 @@ rrs_checked: /** * atl1c_clean - NAPI Rx polling callback + * @napi: napi info + * @budget: limit of packets to clean */ static int atl1c_clean(struct napi_struct *napi, int budget) { diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index fb78f6c31708..e43f71849daf 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -111,7 +111,7 @@ static inline void atl1e_irq_reset(struct atl1e_adapter *adapter) /** * atl1e_phy_config - Timer Call-back - * @data: pointer to netdev cast into an unsigned long + * @t: timer list containing pointer to netdev cast into an unsigned long */ static void atl1e_phy_config(struct timer_list *t) { @@ -196,7 +196,7 @@ static int atl1e_check_link(struct atl1e_adapter *adapter) /** * atl1e_link_chg_task - deal with link change event Out of interrupt context - * @netdev: network interface device structure + * @work: work struct with driver info */ static void atl1e_link_chg_task(struct work_struct *work) { @@ -246,6 +246,7 @@ static void atl1e_cancel_work(struct atl1e_adapter *adapter) /** * atl1e_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure + * @txqueue: the index of the hanging queue */ static void atl1e_tx_timeout(struct net_device *netdev, unsigned int txqueue) { @@ -1502,6 +1503,8 @@ fatal_err: /** * atl1e_clean - NAPI Rx polling callback + * @napi: napi info + * @budget: number of packets to clean */ static int atl1e_clean(struct napi_struct *napi, int budget) { diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c index 60f8aa79deb2..eaf96d002fa5 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.c +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -2552,7 +2552,7 @@ static irqreturn_t atl1_intr(int irq, void *data) /** * atl1_phy_config - Timer Call-back - * @data: pointer to netdev cast into an unsigned long + * @t: timer_list containing pointer to netdev cast into an unsigned long */ static void atl1_phy_config(struct timer_list *t) { diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c index e2526c0fb7cf..021fb0e6417a 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.c +++ b/drivers/net/ethernet/atheros/atlx/atl2.c @@ -994,6 +994,7 @@ static int atl2_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) /** * atl2_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure + * @txqueue: index of the hanging transmit queue */ static void atl2_tx_timeout(struct net_device *netdev, unsigned int txqueue) { @@ -1005,7 +1006,7 @@ static void atl2_tx_timeout(struct net_device *netdev, unsigned int txqueue) /** * atl2_watchdog - Timer Call-back - * @data: pointer to netdev cast into an unsigned long + * @t: timer list containing a pointer to netdev cast into an unsigned long */ static void atl2_watchdog(struct timer_list *t) { @@ -1030,7 +1031,7 @@ static void atl2_watchdog(struct timer_list *t) /** * atl2_phy_config - Timer Call-back - * @data: pointer to netdev cast into an unsigned long + * @t: timer list containing a pointer to netdev cast into an unsigned long */ static void atl2_phy_config(struct timer_list *t) { @@ -1235,6 +1236,7 @@ static int atl2_check_link(struct atl2_adapter *adapter) /** * atl2_link_chg_task - deal with link change event Out of interrupt context + * @work: pointer to work struct with private info */ static void atl2_link_chg_task(struct work_struct *work) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 2c0ccd4fba9b..1a6ec1a12d53 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -504,6 +504,7 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue, * @len_on_bd: total length of the first packet for the * aggregation. * @pkt_len: length of all segments + * @num_of_coalesced_segs: count of segments * * Approximate value of the MSS for this aggregation calculated using * the first packet of it. @@ -1958,6 +1959,7 @@ void bnx2x_set_num_queues(struct bnx2x *bp) * bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues * * @bp: Driver handle + * @include_cnic: handle cnic case * * We currently support for at most 16 Tx queues for each CoS thus we will * allocate a multiple of 16 for ETH L2 rings according to the value of the diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 7cea33803f7f..32245bbe88a8 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -839,8 +839,9 @@ static bool bnx2x_is_wreg_in_chip(struct bnx2x *bp, /** * bnx2x_read_pages_regs - read "paged" registers * - * @bp device handle - * @p output buffer + * @bp: device handle + * @p: output buffer + * @preset: the preset value * * Reads "paged" memories: memories that may only be read by first writing to a * specific address ("write address") and then reading from a specific address @@ -3561,6 +3562,7 @@ static void bnx2x_get_channels(struct net_device *dev, * bnx2x_change_num_queues - change the number of RSS queues. * * @bp: bnx2x private structure + * @num_rss: rss count * * Re-configure interrupt mode to get the new number of MSI-X * vectors and re-add NAPI objects. diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 35f659310084..9e258fc50a7e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -3086,9 +3086,9 @@ void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p) /** * bnx2x_get_common_flags - Return common flags * - * @bp device handle - * @fp queue handle - * @zero_stats TRUE if statistics zeroing is needed + * @bp: device handle + * @fp: queue handle + * @zero_stats: TRUE if statistics zeroing is needed * * Return the flags that are common for the Tx-only and not normal connections. */ @@ -13591,8 +13591,8 @@ static int bnx2x_set_qm_cid_count(struct bnx2x *bp) /** * bnx2x_get_num_none_def_sbs - return the number of none default SBs - * - * @dev: pci device + * @pdev: pci device + * @cnic_cnt: count * */ static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, int cnic_cnt) @@ -14451,9 +14451,7 @@ module_exit(bnx2x_cleanup); /** * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s). - * * @bp: driver handle - * @set: set or clear the CAM entry * * This function will wait until the ramrod completion returns. * Return 0 if success, -ENODEV if ramrod doesn't return. diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index e26f4da5a6d7..6cd1523ad9e5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -37,10 +37,12 @@ /** * bnx2x_exe_queue_init - init the Exe Queue object * + * @bp: driver handle * @o: pointer to the object * @exe_len: length * @owner: pointer to the owner * @validate: validate function pointer + * @remove: remove function pointer * @optimize: optimize function pointer * @exec: execute function pointer * @get: get function pointer @@ -103,7 +105,7 @@ static inline int bnx2x_exe_queue_length(struct bnx2x_exe_queue_obj *o) * * @bp: driver handle * @o: queue - * @cmd: new command to add + * @elem: new command to add * @restore: true - do not optimize the command * * If the element is optimized or is illegal, frees it. @@ -277,7 +279,7 @@ static void bnx2x_raw_set_pending(struct bnx2x_raw_obj *o) * * @bp: device handle * @state: state which is to be cleared - * @state_p: state buffer + * @pstate: state buffer * */ static inline int bnx2x_state_wait(struct bnx2x *bp, int state, @@ -424,8 +426,8 @@ static bool bnx2x_put_credit_vlan_mac(struct bnx2x_vlan_mac_obj *o) * @bp: device handle * @o: vlan_mac object * - * @details: Non-blocking implementation; should be called under execution - * queue lock. + * Context: Non-blocking implementation; should be called under execution + * queue lock. */ static int __bnx2x_vlan_mac_h_write_trylock(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o) @@ -445,7 +447,7 @@ static int __bnx2x_vlan_mac_h_write_trylock(struct bnx2x *bp, * @bp: device handle * @o: vlan_mac object * - * @details Should be called under execution queue lock; notice it might release + * details Should be called under execution queue lock; notice it might release * and reclaim it during its run. */ static void __bnx2x_vlan_mac_h_exec_pending(struct bnx2x *bp, @@ -475,7 +477,7 @@ static void __bnx2x_vlan_mac_h_exec_pending(struct bnx2x *bp, * @o: vlan_mac object * @ramrod_flags: ramrod flags of missed execution * - * @details Should be called under execution queue lock. + * Context: Should be called under execution queue lock. */ static void __bnx2x_vlan_mac_h_pend(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o, @@ -493,7 +495,7 @@ static void __bnx2x_vlan_mac_h_pend(struct bnx2x *bp, * @bp: device handle * @o: vlan_mac object * - * @details Should be called under execution queue lock. Notice if a pending + * Context: Should be called under execution queue lock. Notice if a pending * execution exists, it would perform it - possibly releasing and * reclaiming the execution queue lock. */ @@ -516,7 +518,7 @@ static void __bnx2x_vlan_mac_h_write_unlock(struct bnx2x *bp, * @bp: device handle * @o: vlan_mac object * - * @details Should be called under the execution queue lock. May sleep. May + * Context: Should be called under the execution queue lock. May sleep. May * release and reclaim execution queue lock during its run. */ static int __bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp, @@ -536,7 +538,7 @@ static int __bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp, * @bp: device handle * @o: vlan_mac object * - * @details May sleep. Claims and releases execution queue lock during its run. + * Context: May sleep. Claims and releases execution queue lock during its run. */ int bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o) @@ -556,7 +558,7 @@ int bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp, * @bp: device handle * @o: vlan_mac object * - * @details Should be called under execution queue lock. Notice if a pending + * Context: Should be called under execution queue lock. Notice if a pending * execution exists, it would be performed if this was the last * reader. possibly releasing and reclaiming the execution queue lock. */ @@ -591,7 +593,7 @@ static void __bnx2x_vlan_mac_h_read_unlock(struct bnx2x *bp, * @bp: device handle * @o: vlan_mac object * - * @details Notice if a pending execution exists, it would be performed if this + * Context: Notice if a pending execution exists, it would be performed if this * was the last reader. Claims and releases the execution queue lock * during its run. */ @@ -968,7 +970,7 @@ static void bnx2x_set_one_mac_e2(struct bnx2x *bp, * * @bp: device handle * @o: queue - * @type: + * @type: the type of echo * @cam_offset: offset in cam memory * @hdr: pointer to a header to setup * @@ -1608,8 +1610,8 @@ static int __bnx2x_vlan_mac_execute_step(struct bnx2x *bp, * * @bp: device handle * @o: bnx2x_vlan_mac_obj - * @cqe: - * @cont: if true schedule next execution chunk + * @cqe: completion element + * @ramrod_flags: if set schedule next execution chunk * */ static int bnx2x_complete_vlan_mac(struct bnx2x *bp, @@ -1656,7 +1658,7 @@ static int bnx2x_complete_vlan_mac(struct bnx2x *bp, * bnx2x_optimize_vlan_mac - optimize ADD and DEL commands. * * @bp: device handle - * @o: bnx2x_qable_obj + * @qo: bnx2x_qable_obj * @elem: bnx2x_exeq_elem */ static int bnx2x_optimize_vlan_mac(struct bnx2x *bp, @@ -1714,10 +1716,10 @@ static int bnx2x_optimize_vlan_mac(struct bnx2x *bp, * bnx2x_vlan_mac_get_registry_elem - prepare a registry element * * @bp: device handle - * @o: - * @elem: - * @restore: - * @re: + * @o: vlan object + * @elem: element + * @restore: to restore or not + * @re: registry * * prepare a registry element according to the current command request. */ @@ -1768,9 +1770,9 @@ static inline int bnx2x_vlan_mac_get_registry_elem( * bnx2x_execute_vlan_mac - execute vlan mac command * * @bp: device handle - * @qo: - * @exe_chunk: - * @ramrod_flags: + * @qo: bnx2x_qable_obj pointer + * @exe_chunk: chunk + * @ramrod_flags: flags * * go and send a ramrod! */ @@ -2006,8 +2008,8 @@ int bnx2x_config_vlan_mac(struct bnx2x *bp, * bnx2x_vlan_mac_del_all - delete elements with given vlan_mac_flags spec * * @bp: device handle - * @o: - * @vlan_mac_flags: + * @o: vlan object info + * @vlan_mac_flags: vlan flags * @ramrod_flags: execution flags to be used for this deletion * * if the last operation has completed successfully and there are no @@ -2767,7 +2769,7 @@ static int bnx2x_mcast_enqueue_cmd(struct bnx2x *bp, /** * bnx2x_mcast_get_next_bin - get the next set bin (index) * - * @o: + * @o: multicast object info * @last: index to start looking from (including) * * returns the next found (set) bin or a negative value if none is found. @@ -2892,7 +2894,7 @@ static void bnx2x_mcast_set_one_rule_e2(struct bnx2x *bp, * bnx2x_mcast_handle_restore_cmd_e2 - restore configuration from the registry * * @bp: device handle - * @o: + * @o: multicast object info * @start_bin: index in the registry to start from (including) * @rdata_idx: index in the ramrod data to start from * @@ -3202,11 +3204,11 @@ static inline void bnx2x_mcast_hdl_del(struct bnx2x *bp, } /** - * bnx2x_mcast_handle_current_cmd - + * bnx2x_mcast_handle_current_cmd - send command if room * * @bp: device handle - * @p: - * @cmd: + * @p: ramrod mcast info + * @cmd: command * @start_cnt: first line in the ramrod data that may be used * * This function is called iff there is enough place for the current command in @@ -3323,7 +3325,7 @@ static void bnx2x_mcast_revert_e2(struct bnx2x *bp, * bnx2x_mcast_set_rdata_hdr_e2 - sets a header values * * @bp: device handle - * @p: + * @p: ramrod parameters * @len: number of rules to handle */ static inline void bnx2x_mcast_set_rdata_hdr_e2(struct bnx2x *bp, @@ -3684,7 +3686,7 @@ static void bnx2x_mcast_set_one_rule_e1(struct bnx2x *bp, * bnx2x_mcast_set_rdata_hdr_e1 - set header values in mac_configuration_cmd * * @bp: device handle - * @p: + * @p: ramrod parameters * @len: number of rules to handle */ static inline void bnx2x_mcast_set_rdata_hdr_e1(struct bnx2x *bp, @@ -3711,7 +3713,7 @@ static inline void bnx2x_mcast_set_rdata_hdr_e1(struct bnx2x *bp, * bnx2x_mcast_handle_restore_cmd_e1 - restore command for 57710 * * @bp: device handle - * @o: + * @o: multicast info * @start_idx: index in the registry to start from * @rdata_idx: index in the ramrod data to start from * @@ -3798,10 +3800,10 @@ static inline int bnx2x_mcast_handle_pending_cmds_e1( /** * bnx2x_get_fw_mac_addr - revert the bnx2x_set_fw_mac_addr(). * - * @fw_hi: - * @fw_mid: - * @fw_lo: - * @mac: + * @fw_hi: address + * @fw_mid: address + * @fw_lo: address + * @mac: mac address */ static inline void bnx2x_get_fw_mac_addr(__le16 *fw_hi, __le16 *fw_mid, __le16 *fw_lo, u8 *mac) @@ -3818,7 +3820,7 @@ static inline void bnx2x_get_fw_mac_addr(__le16 *fw_hi, __le16 *fw_mid, * bnx2x_mcast_refresh_registry_e1 - * * @bp: device handle - * @cnt: + * @o: multicast info * * Check the ramrod data first entry flag to see if it's a DELETE or ADD command * and update the registry correspondingly: if ADD - allocate a memory and add @@ -4311,7 +4313,7 @@ static bool bnx2x_credit_pool_get_entry_always_true( /** * bnx2x_init_credit_pool - initialize credit pool internals. * - * @p: + * @p: credit pool * @base: Base entry in the CAM to use. * @credit: pool size. * @@ -4725,8 +4727,8 @@ static int bnx2x_queue_wait_comp(struct bnx2x *bp, * bnx2x_queue_comp_cmd - complete the state change command. * * @bp: device handle - * @o: - * @cmd: + * @o: queue info + * @cmd: command to exec * * Checks that the arrived completion is expected. */ @@ -5477,8 +5479,8 @@ static int bnx2x_queue_send_cmd_e2(struct bnx2x *bp, * bnx2x_queue_chk_transition - check state machine of a regular Queue * * @bp: device handle - * @o: - * @params: + * @o: queue info + * @params: queue state * * (not Forwarding) * It both checks if the requested command is legal in a current @@ -5735,8 +5737,8 @@ static int bnx2x_func_wait_comp(struct bnx2x *bp, * bnx2x_func_state_change_comp - complete the state machine transition * * @bp: device handle - * @o: - * @cmd: + * @o: function info + * @cmd: more info * * Called on state change transition. Completes the state * machine transition only - no HW interaction. @@ -5776,8 +5778,8 @@ static inline int bnx2x_func_state_change_comp(struct bnx2x *bp, * bnx2x_func_comp_cmd - complete the state change command * * @bp: device handle - * @o: - * @cmd: + * @o: function info + * @cmd: more info * * Checks that the arrived completion is expected. */ @@ -5796,8 +5798,8 @@ static int bnx2x_func_comp_cmd(struct bnx2x *bp, * bnx2x_func_chk_transition - perform function state machine transition * * @bp: device handle - * @o: - * @params: + * @o: function info + * @params: state parameters * * It both checks if the requested command is legal in a current * state and, if it's legal, sets a `next_state' in the object diff --git a/drivers/net/ethernet/brocade/bna/bfa_cee.c b/drivers/net/ethernet/brocade/bna/bfa_cee.c index 09fb9315d1ae..06f221c44802 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_cee.c +++ b/drivers/net/ethernet/brocade/bna/bfa_cee.c @@ -102,14 +102,10 @@ bfa_cee_get_stats_isr(struct bfa_cee *cee, enum bfa_status status) } /** - * bfa_cee_get_attr_isr() + * bfa_cee_reset_stats_isr - CEE ISR for reset-stats responses from f/w * - * @brief CEE ISR for reset-stats responses from f/w - * - * @param[in] cee - Pointer to the CEE module - * status - Return status from the f/w - * - * @return void + * @cee: Input Pointer to the CEE module + * @status: Return status from the f/w */ static void bfa_cee_reset_stats_isr(struct bfa_cee *cee, enum bfa_status status) @@ -148,9 +144,12 @@ bfa_nw_cee_mem_claim(struct bfa_cee *cee, u8 *dma_kva, u64 dma_pa) } /** - * bfa_cee_get_attr - Send the request to the f/w to fetch CEE attributes. + * bfa_nw_cee_get_attr - Send the request to the f/w to fetch CEE attributes. * * @cee: Pointer to the CEE module data structure. + * @attr: attribute requested + * @cbfn: function pointer + * @cbarg: function pointer arguments * * Return: status */ @@ -181,7 +180,9 @@ bfa_nw_cee_get_attr(struct bfa_cee *cee, struct bfa_cee_attr *attr, } /** - * bfa_cee_isrs - Handles Mail-box interrupts for CEE module. + * bfa_cee_isr - Handles Mail-box interrupts for CEE module. + * @cbarg: argument passed containing pointer to the CEE module data structure. + * @m: message pointer */ static void @@ -210,6 +211,7 @@ bfa_cee_isr(void *cbarg, struct bfi_mbmsg *m) /** * bfa_cee_notify - CEE module heart-beat failure handler. * + * @arg: argument passed containing pointer to the CEE module data structure. * @event: IOC event type */ diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c index b9dd06b12945..fd805c685d92 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c @@ -1763,7 +1763,7 @@ bfa_ioc_flash_fwver_cmp(struct bfa_ioc *ioc, return BFI_IOC_IMG_VER_INCOMP; } -/** +/* * Returns TRUE if driver is willing to work with current smem f/w version. */ bool @@ -2469,6 +2469,7 @@ bfa_ioc_isr(struct bfa_ioc *ioc, struct bfi_mbmsg *m) * * @ioc: memory for IOC * @bfa: driver instance structure + * @cbfn: callback function */ void bfa_nw_ioc_attach(struct bfa_ioc *ioc, void *bfa, struct bfa_ioc_cbfn *cbfn) @@ -2500,7 +2501,9 @@ bfa_nw_ioc_detach(struct bfa_ioc *ioc) /** * bfa_nw_ioc_pci_init - Setup IOC PCI properties. * + * @ioc: memory for IOC * @pcidev: PCI device information for this IOC + * @clscode: class code */ void bfa_nw_ioc_pci_init(struct bfa_ioc *ioc, struct bfa_pcidev *pcidev, @@ -2569,6 +2572,7 @@ bfa_nw_ioc_pci_init(struct bfa_ioc *ioc, struct bfa_pcidev *pcidev, /** * bfa_nw_ioc_mem_claim - Initialize IOC dma memory * + * @ioc: memory for IOC * @dm_kva: kernel virtual address of IOC dma memory * @dm_pa: physical address of IOC dma memory */ @@ -2636,6 +2640,8 @@ bfa_nw_ioc_mbox_regisr(struct bfa_ioc *ioc, enum bfi_mclass mc, * * @ioc: IOC instance * @cmd: Mailbox command + * @cbfn: callback function + * @cbarg: arguments to callback * * Waits if mailbox is busy. Responsibility of caller to serialize */ diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 9c8f40e8a721..f00ad73ea8e3 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -458,9 +458,9 @@ static void macb_init_buffers(struct macb *bp) /** * macb_set_tx_clk() - Set a clock to a new frequency - * @clk Pointer to the clock to change - * @rate New frequency in Hz - * @dev Pointer to the struct net_device + * @clk: Pointer to the clock to change + * @speed: New frequency in Hz + * @dev: Pointer to the struct net_device */ static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev) { diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 05a3d067c3fc..bbb453c6a5f7 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1246,6 +1246,8 @@ static int xgmac_poll(struct napi_struct *napi, int budget) /** * xgmac_tx_timeout * @dev : Pointer to net device structure + * @txqueue: index of the hung transmit queue + * * Description: this function is called when a packet transmission fails to * complete within a reasonable tmrate. The driver will mark the error in the * netdev structure and arrange for the device to be reset to a sane state diff --git a/drivers/net/ethernet/cavium/liquidio/lio_core.c b/drivers/net/ethernet/cavium/liquidio/lio_core.c index e40c64b79f66..9ef172976b35 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_core.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_core.c @@ -32,8 +32,8 @@ #define OCTNIC_MAX_SG MAX_SKB_FRAGS /** - * \brief Delete gather lists - * @param lio per-network private data + * lio_delete_glists - Delete gather lists + * @lio: per-network private data */ void lio_delete_glists(struct lio *lio) { @@ -73,8 +73,10 @@ void lio_delete_glists(struct lio *lio) } /** - * \brief Setup gather lists - * @param lio per-network private data + * lio_setup_glists - Setup gather lists + * @oct: octeon_device + * @lio: per-network private data + * @num_iqs: count of iqs to allocate */ int lio_setup_glists(struct octeon_device *oct, struct lio *lio, int num_iqs) { @@ -521,12 +523,12 @@ static void lio_update_txq_status(struct octeon_device *oct, int iq_num) } /** - * \brief Setup output queue - * @param oct octeon device - * @param q_no which queue - * @param num_descs how many descriptors - * @param desc_size size of each descriptor - * @param app_ctx application context + * octeon_setup_droq - Setup output queue + * @oct: octeon device + * @q_no: which queue + * @num_descs: how many descriptors + * @desc_size: size of each descriptor + * @app_ctx: application context */ static int octeon_setup_droq(struct octeon_device *oct, int q_no, int num_descs, int desc_size, void *app_ctx) @@ -555,16 +557,17 @@ static int octeon_setup_droq(struct octeon_device *oct, int q_no, int num_descs, return ret_val; } -/** Routine to push packets arriving on Octeon interface upto network layer. - * @param oct_id - octeon device id. - * @param skbuff - skbuff struct to be passed to network layer. - * @param len - size of total data received. - * @param rh - Control header associated with the packet - * @param param - additional control data with the packet - * @param arg - farg registered in droq_ops +/** + * liquidio_push_packet - Routine to push packets arriving on Octeon interface upto network layer. + * @octeon_id:octeon device id. + * @skbuff: skbuff struct to be passed to network layer. + * @len: size of total data received. + * @rh: Control header associated with the packet + * @param: additional control data with the packet + * @arg: farg registered in droq_ops */ static void -liquidio_push_packet(u32 octeon_id __attribute__((unused)), +liquidio_push_packet(u32 __maybe_unused octeon_id, void *skbuff, u32 len, union octeon_rh *rh, @@ -698,8 +701,8 @@ liquidio_push_packet(u32 octeon_id __attribute__((unused)), } /** - * \brief wrapper for calling napi_schedule - * @param param parameters to pass to napi_schedule + * napi_schedule_wrapper - wrapper for calling napi_schedule + * @param: parameters to pass to napi_schedule * * Used when scheduling on different CPUs */ @@ -711,8 +714,8 @@ static void napi_schedule_wrapper(void *param) } /** - * \brief callback when receive interrupt occurs and we are in NAPI mode - * @param arg pointer to octeon output queue + * liquidio_napi_drv_callback - callback when receive interrupt occurs and we are in NAPI mode + * @arg: pointer to octeon output queue */ static void liquidio_napi_drv_callback(void *arg) { @@ -737,9 +740,9 @@ static void liquidio_napi_drv_callback(void *arg) } /** - * \brief Entry point for NAPI polling - * @param napi NAPI structure - * @param budget maximum number of items to process + * liquidio_napi_poll - Entry point for NAPI polling + * @napi: NAPI structure + * @budget: maximum number of items to process */ static int liquidio_napi_poll(struct napi_struct *napi, int budget) { @@ -792,9 +795,11 @@ static int liquidio_napi_poll(struct napi_struct *napi, int budget) } /** - * \brief Setup input and output queues - * @param octeon_dev octeon device - * @param ifidx Interface index + * liquidio_setup_io_queues - Setup input and output queues + * @octeon_dev: octeon device + * @ifidx: Interface index + * @num_iqs: input io queue count + * @num_oqs: output io queue count * * Note: Queues are with respect to the octeon device. Thus * an input queue is for egress packets, and output queues @@ -927,7 +932,7 @@ int liquidio_schedule_msix_droq_pkt_handler(struct octeon_droq *droq, u64 ret) } irqreturn_t -liquidio_msix_intr_handler(int irq __attribute__((unused)), void *dev) +liquidio_msix_intr_handler(int __maybe_unused irq, void *dev) { struct octeon_ioq_vector *ioq_vector = (struct octeon_ioq_vector *)dev; struct octeon_device *oct = ioq_vector->oct_dev; @@ -943,8 +948,8 @@ liquidio_msix_intr_handler(int irq __attribute__((unused)), void *dev) } /** - * \brief Droq packet processor sceduler - * @param oct octeon device + * liquidio_schedule_droq_pkt_handlers - Droq packet processor sceduler + * @oct: octeon device */ static void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct) { @@ -972,13 +977,12 @@ static void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct) } /** - * \brief Interrupt handler for octeon - * @param irq unused - * @param dev octeon device + * liquidio_legacy_intr_handler - Interrupt handler for octeon + * @irq: unused + * @dev: octeon device */ static -irqreturn_t liquidio_legacy_intr_handler(int irq __attribute__((unused)), - void *dev) +irqreturn_t liquidio_legacy_intr_handler(int __maybe_unused irq, void *dev) { struct octeon_device *oct = (struct octeon_device *)dev; irqreturn_t ret; @@ -999,8 +1003,9 @@ irqreturn_t liquidio_legacy_intr_handler(int irq __attribute__((unused)), } /** - * \brief Setup interrupt for octeon device - * @param oct octeon device + * octeon_setup_interrupt - Setup interrupt for octeon device + * @oct: octeon device + * @num_ioqs: number of queues * * Enable interrupt in Octeon device as given in the PCI interrupt mask. */ @@ -1083,7 +1088,7 @@ int octeon_setup_interrupt(struct octeon_device *oct, u32 num_ioqs) dev_dbg(&oct->pci_dev->dev, "OCTEON: Enough MSI-X interrupts are allocated...\n"); num_ioq_vectors = oct->num_msix_irqs; - /** For PF, there is one non-ioq interrupt handler */ + /* For PF, there is one non-ioq interrupt handler */ if (OCTEON_CN23XX_PF(oct)) { num_ioq_vectors -= 1; @@ -1126,13 +1131,13 @@ int octeon_setup_interrupt(struct octeon_device *oct, u32 num_ioqs) dev_err(&oct->pci_dev->dev, "Request_irq failed for MSIX interrupt Error: %d\n", irqret); - /** Freeing the non-ioq irq vector here . */ + /* Freeing the non-ioq irq vector here . */ free_irq(msix_entries[num_ioq_vectors].vector, oct); while (i) { i--; - /** clearing affinity mask. */ + /* clearing affinity mask. */ irq_set_affinity_hint( msix_entries[i].vector, NULL); @@ -1197,8 +1202,9 @@ int octeon_setup_interrupt(struct octeon_device *oct, u32 num_ioqs) } /** - * \brief Net device change_mtu - * @param netdev network device + * liquidio_change_mtu - Net device change_mtu + * @netdev: network device + * @new_mtu: the new max transmit unit size */ int liquidio_change_mtu(struct net_device *netdev, int new_mtu) { diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c index 9eac0d43b58d..7d00d3a8ded4 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c @@ -69,9 +69,9 @@ MODULE_PARM_DESC(console_bitmask, "Bitmask indicating which consoles have debug output redirected to syslog."); /** - * \brief determines if a given console has debug enabled. - * @param console console to check - * @returns 1 = enabled. 0 otherwise + * octeon_console_debug_enabled - determines if a given console has debug enabled. + * @console: console to check + * Return: 1 = enabled. 0 otherwise */ static int octeon_console_debug_enabled(u32 console) { @@ -126,7 +126,7 @@ union tx_info { } s; }; -/** Octeon device properties to be used by the NIC module. +/* Octeon device properties to be used by the NIC module. * Each octeon device in the system will be represented * by this structure in the NIC module. */ @@ -222,8 +222,8 @@ static int lio_wait_for_oq_pkts(struct octeon_device *oct) } /** - * \brief Forces all IO queues off on a given device - * @param oct Pointer to Octeon device + * force_io_queues_off - Forces all IO queues off on a given device + * @oct: Pointer to Octeon device */ static void force_io_queues_off(struct octeon_device *oct) { @@ -238,8 +238,8 @@ static void force_io_queues_off(struct octeon_device *oct) } /** - * \brief Cause device to go quiet so it can be safely removed/reset/etc - * @param oct Pointer to Octeon device + * pcierror_quiesce_device - Cause device to go quiet so it can be safely removed/reset/etc + * @oct: Pointer to Octeon device */ static inline void pcierror_quiesce_device(struct octeon_device *oct) { @@ -283,8 +283,8 @@ static inline void pcierror_quiesce_device(struct octeon_device *oct) } /** - * \brief Cleanup PCI AER uncorrectable error status - * @param dev Pointer to PCI device + * cleanup_aer_uncorrect_error_status - Cleanup PCI AER uncorrectable error status + * @dev: Pointer to PCI device */ static void cleanup_aer_uncorrect_error_status(struct pci_dev *dev) { @@ -303,8 +303,8 @@ static void cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } /** - * \brief Stop all PCI IO to a given device - * @param dev Pointer to Octeon device + * stop_pci_io - Stop all PCI IO to a given device + * @oct: Pointer to Octeon device */ static void stop_pci_io(struct octeon_device *oct) { @@ -332,9 +332,9 @@ static void stop_pci_io(struct octeon_device *oct) } /** - * \brief called when PCI error is detected - * @param pdev Pointer to PCI device - * @param state The current pci connection state + * liquidio_pcie_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state * * This function is called after a PCI bus error affecting * this device has been detected. @@ -362,11 +362,10 @@ static pci_ers_result_t liquidio_pcie_error_detected(struct pci_dev *pdev, } /** - * \brief mmio handler - * @param pdev Pointer to PCI device + * liquidio_pcie_mmio_enabled - mmio handler + * @pdev: Pointer to PCI device */ -static pci_ers_result_t liquidio_pcie_mmio_enabled( - struct pci_dev *pdev __attribute__((unused))) +static pci_ers_result_t liquidio_pcie_mmio_enabled(struct pci_dev __maybe_unused *pdev) { /* We should never hit this since we never ask for a reset for a Fatal * Error. We always return DISCONNECT in io_error above. @@ -376,14 +375,13 @@ static pci_ers_result_t liquidio_pcie_mmio_enabled( } /** - * \brief called after the pci bus has been reset. - * @param pdev Pointer to PCI device + * liquidio_pcie_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device * * Restart the card from scratch, as if from a cold-boot. Implementation * resembles the first-half of the octeon_resume routine. */ -static pci_ers_result_t liquidio_pcie_slot_reset( - struct pci_dev *pdev __attribute__((unused))) +static pci_ers_result_t liquidio_pcie_slot_reset(struct pci_dev __maybe_unused *pdev) { /* We should never hit this since we never ask for a reset for a Fatal * Error. We always return DISCONNECT in io_error above. @@ -393,14 +391,14 @@ static pci_ers_result_t liquidio_pcie_slot_reset( } /** - * \brief called when traffic can start flowing again. - * @param pdev Pointer to PCI device + * liquidio_pcie_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device * * This callback is called when the error recovery driver tells us that * its OK to resume normal operation. Implementation resembles the * second-half of the octeon_resume routine. */ -static void liquidio_pcie_resume(struct pci_dev *pdev __attribute__((unused))) +static void liquidio_pcie_resume(struct pci_dev __maybe_unused *pdev) { /* Nothing to be done here. */ } @@ -447,7 +445,7 @@ static struct pci_driver liquidio_pci_driver = { }; /** - * \brief register PCI driver + * liquidio_init_pci - register PCI driver */ static int liquidio_init_pci(void) { @@ -455,7 +453,7 @@ static int liquidio_init_pci(void) } /** - * \brief unregister PCI driver + * liquidio_deinit_pci - unregister PCI driver */ static void liquidio_deinit_pci(void) { @@ -463,9 +461,9 @@ static void liquidio_deinit_pci(void) } /** - * \brief Check Tx queue status, and take appropriate action - * @param lio per-network private data - * @returns 0 if full, number of queues woken up otherwise + * check_txq_status - Check Tx queue status, and take appropriate action + * @lio: per-network private data + * Return: 0 if full, number of queues woken up otherwise */ static inline int check_txq_status(struct lio *lio) { @@ -491,8 +489,8 @@ static inline int check_txq_status(struct lio *lio) } /** - * \brief Print link information - * @param netdev network device + * print_link_info - Print link information + * @netdev: network device */ static void print_link_info(struct net_device *netdev) { @@ -513,8 +511,8 @@ static void print_link_info(struct net_device *netdev) } /** - * \brief Routine to notify MTU change - * @param work work_struct data structure + * octnet_link_status_change - Routine to notify MTU change + * @work: work_struct data structure */ static void octnet_link_status_change(struct work_struct *work) { @@ -531,8 +529,8 @@ static void octnet_link_status_change(struct work_struct *work) } /** - * \brief Sets up the mtu status change work - * @param netdev network device + * setup_link_status_change_wq - Sets up the mtu status change work + * @netdev: network device */ static inline int setup_link_status_change_wq(struct net_device *netdev) { @@ -563,9 +561,9 @@ static inline void cleanup_link_status_change_wq(struct net_device *netdev) } /** - * \brief Update link status - * @param netdev network device - * @param ls link status structure + * update_link_status - Update link status + * @netdev: network device + * @ls: link status structure * * Called on receipt of a link status response from the core application to * update each interface's link status. @@ -663,10 +661,9 @@ static void lio_sync_octeon_time(struct work_struct *work) } /** - * setup_sync_octeon_time_wq - Sets up the work to periodically update - * local time to octeon firmware + * setup_sync_octeon_time_wq - prepare work to periodically update local time to octeon firmware * - * @netdev - network device which should send time update to firmware + * @netdev: network device which should send time update to firmware **/ static inline int setup_sync_octeon_time_wq(struct net_device *netdev) { @@ -690,10 +687,12 @@ static inline int setup_sync_octeon_time_wq(struct net_device *netdev) } /** - * cleanup_sync_octeon_time_wq - stop scheduling and destroy the work created - * to periodically update local time to octeon firmware + * cleanup_sync_octeon_time_wq - destroy wq * - * @netdev - network device which should send time update to firmware + * @netdev: network device which should send time update to firmware + * + * Stop scheduling and destroy the work created to periodically update local + * time to octeon firmware. **/ static inline void cleanup_sync_octeon_time_wq(struct net_device *netdev) { @@ -828,13 +827,12 @@ static int liquidio_watchdog(void *param) } /** - * \brief PCI probe handler - * @param pdev PCI device structure - * @param ent unused + * liquidio_probe - PCI probe handler + * @pdev: PCI device structure + * @ent: unused */ static int -liquidio_probe(struct pci_dev *pdev, - const struct pci_device_id *ent __attribute__((unused))) +liquidio_probe(struct pci_dev *pdev, const struct pci_device_id __maybe_unused *ent) { struct octeon_device *oct_dev = NULL; struct handshake *hs; @@ -924,8 +922,8 @@ static bool fw_type_is_auto(void) } /** - * \brief PCI FLR for each Octeon device. - * @param oct octeon device + * octeon_pci_flr - PCI FLR for each Octeon device. + * @oct: octeon device */ static void octeon_pci_flr(struct octeon_device *oct) { @@ -951,9 +949,8 @@ static void octeon_pci_flr(struct octeon_device *oct) } /** - *\brief Destroy resources associated with octeon device - * @param pdev PCI device structure - * @param ent unused + * octeon_destroy_resources - Destroy resources associated with octeon device + * @oct: octeon device */ static void octeon_destroy_resources(struct octeon_device *oct) { @@ -1152,9 +1149,9 @@ static void octeon_destroy_resources(struct octeon_device *oct) } /** - * \brief Send Rx control command - * @param lio per-network private data - * @param start_stop whether to start or stop + * send_rx_ctrl_cmd - Send Rx control command + * @lio: per-network private data + * @start_stop: whether to start or stop */ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) { @@ -1210,9 +1207,9 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) } /** - * \brief Destroy NIC device interface - * @param oct octeon device - * @param ifidx which interface to destroy + * liquidio_destroy_nic_device - Destroy NIC device interface + * @oct: octeon device + * @ifidx: which interface to destroy * * Cleanup associated with each interface for an Octeon device when NIC * module is being unloaded or if initialization fails during load. @@ -1272,8 +1269,8 @@ static void liquidio_destroy_nic_device(struct octeon_device *oct, int ifidx) } /** - * \brief Stop complete NIC functionality - * @param oct octeon device + * liquidio_stop_nic_module - Stop complete NIC functionality + * @oct: octeon device */ static int liquidio_stop_nic_module(struct octeon_device *oct) { @@ -1313,8 +1310,8 @@ static int liquidio_stop_nic_module(struct octeon_device *oct) } /** - * \brief Cleans up resources at unload time - * @param pdev PCI device structure + * liquidio_remove - Cleans up resources at unload time + * @pdev: PCI device structure */ static void liquidio_remove(struct pci_dev *pdev) { @@ -1346,8 +1343,8 @@ static void liquidio_remove(struct pci_dev *pdev) } /** - * \brief Identify the Octeon device and to map the BAR address space - * @param oct octeon device + * octeon_chip_specific_setup - Identify the Octeon device and to map the BAR address space + * @oct: octeon device */ static int octeon_chip_specific_setup(struct octeon_device *oct) { @@ -1390,8 +1387,8 @@ static int octeon_chip_specific_setup(struct octeon_device *oct) } /** - * \brief PCI initialization for each Octeon device. - * @param oct octeon device + * octeon_pci_os_setup - PCI initialization for each Octeon device. + * @oct: octeon device */ static int octeon_pci_os_setup(struct octeon_device *oct) { @@ -1414,8 +1411,8 @@ static int octeon_pci_os_setup(struct octeon_device *oct) } /** - * \brief Unmap and free network buffer - * @param buf buffer + * free_netbuf - Unmap and free network buffer + * @buf: buffer */ static void free_netbuf(void *buf) { @@ -1434,8 +1431,8 @@ static void free_netbuf(void *buf) } /** - * \brief Unmap and free gather buffer - * @param buf buffer + * free_netsgbuf - Unmap and free gather buffer + * @buf: buffer */ static void free_netsgbuf(void *buf) { @@ -1474,8 +1471,8 @@ static void free_netsgbuf(void *buf) } /** - * \brief Unmap and free gather buffer with response - * @param buf buffer + * free_netsgbuf_with_resp - Unmap and free gather buffer with response + * @buf: buffer */ static void free_netsgbuf_with_resp(void *buf) { @@ -1518,9 +1515,9 @@ static void free_netsgbuf_with_resp(void *buf) } /** - * \brief Adjust ptp frequency - * @param ptp PTP clock info - * @param ppb how much to adjust by, in parts-per-billion + * liquidio_ptp_adjfreq - Adjust ptp frequency + * @ptp: PTP clock info + * @ppb: how much to adjust by, in parts-per-billion */ static int liquidio_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) { @@ -1555,9 +1552,9 @@ static int liquidio_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) } /** - * \brief Adjust ptp time - * @param ptp PTP clock info - * @param delta how much to adjust by, in nanosecs + * liquidio_ptp_adjtime - Adjust ptp time + * @ptp: PTP clock info + * @delta: how much to adjust by, in nanosecs */ static int liquidio_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) { @@ -1572,9 +1569,9 @@ static int liquidio_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) } /** - * \brief Get hardware clock time, including any adjustment - * @param ptp PTP clock info - * @param ts timespec + * liquidio_ptp_gettime - Get hardware clock time, including any adjustment + * @ptp: PTP clock info + * @ts: timespec */ static int liquidio_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) @@ -1595,9 +1592,9 @@ static int liquidio_ptp_gettime(struct ptp_clock_info *ptp, } /** - * \brief Set hardware clock time. Reset adjustment - * @param ptp PTP clock info - * @param ts timespec + * liquidio_ptp_settime - Set hardware clock time. Reset adjustment + * @ptp: PTP clock info + * @ts: timespec */ static int liquidio_ptp_settime(struct ptp_clock_info *ptp, const struct timespec64 *ts) @@ -1618,22 +1615,22 @@ static int liquidio_ptp_settime(struct ptp_clock_info *ptp, } /** - * \brief Check if PTP is enabled - * @param ptp PTP clock info - * @param rq request - * @param on is it on + * liquidio_ptp_enable - Check if PTP is enabled + * @ptp: PTP clock info + * @rq: request + * @on: is it on */ static int -liquidio_ptp_enable(struct ptp_clock_info *ptp __attribute__((unused)), - struct ptp_clock_request *rq __attribute__((unused)), - int on __attribute__((unused))) +liquidio_ptp_enable(struct ptp_clock_info __maybe_unused *ptp, + struct ptp_clock_request __maybe_unused *rq, + int __maybe_unused on) { return -EOPNOTSUPP; } /** - * \brief Open PTP clock source - * @param netdev network device + * oct_ptp_open - Open PTP clock source + * @netdev: network device */ static void oct_ptp_open(struct net_device *netdev) { @@ -1665,8 +1662,8 @@ static void oct_ptp_open(struct net_device *netdev) } /** - * \brief Init PTP clock - * @param oct octeon device + * liquidio_ptp_init - Init PTP clock + * @oct: octeon device */ static void liquidio_ptp_init(struct octeon_device *oct) { @@ -1682,8 +1679,8 @@ static void liquidio_ptp_init(struct octeon_device *oct) } /** - * \brief Load firmware to device - * @param oct octeon device + * load_firmware - Load firmware to device + * @oct: octeon device * * Maps device to firmware filename, requests firmware, and downloads it */ @@ -1721,8 +1718,8 @@ static int load_firmware(struct octeon_device *oct) } /** - * \brief Poll routine for checking transmit queue status - * @param work work_struct data structure + * octnet_poll_check_txq_status - Poll routine for checking transmit queue status + * @work: work_struct data structure */ static void octnet_poll_check_txq_status(struct work_struct *work) { @@ -1738,8 +1735,8 @@ static void octnet_poll_check_txq_status(struct work_struct *work) } /** - * \brief Sets up the txq poll check - * @param netdev network device + * setup_tx_poll_fn - Sets up the txq poll check + * @netdev: network device */ static inline int setup_tx_poll_fn(struct net_device *netdev) { @@ -1771,8 +1768,8 @@ static inline void cleanup_tx_poll_fn(struct net_device *netdev) } /** - * \brief Net device open for LiquidIO - * @param netdev network device + * liquidio_open - Net device open for LiquidIO + * @netdev: network device */ static int liquidio_open(struct net_device *netdev) { @@ -1831,8 +1828,8 @@ static int liquidio_open(struct net_device *netdev) } /** - * \brief Net device stop for LiquidIO - * @param netdev network device + * liquidio_stop - Net device stop for LiquidIO + * @netdev: network device */ static int liquidio_stop(struct net_device *netdev) { @@ -1896,8 +1893,8 @@ static int liquidio_stop(struct net_device *netdev) } /** - * \brief Converts a mask based on net device flags - * @param netdev network device + * get_new_flags - Converts a mask based on net device flags + * @netdev: network device * * This routine generates a octnet_ifflags mask from the net device flags * received from the OS. @@ -1929,8 +1926,8 @@ static inline enum octnet_ifflags get_new_flags(struct net_device *netdev) } /** - * \brief Net device set_multicast_list - * @param netdev network device + * liquidio_set_mcast_list - Net device set_multicast_list + * @netdev: network device */ static void liquidio_set_mcast_list(struct net_device *netdev) { @@ -1977,8 +1974,9 @@ static void liquidio_set_mcast_list(struct net_device *netdev) } /** - * \brief Net device set_mac_address - * @param netdev network device + * liquidio_set_mac - Net device set_mac_address + * @netdev: network device + * @p: pointer to sockaddr */ static int liquidio_set_mac(struct net_device *netdev, void *p) { @@ -2096,10 +2094,9 @@ liquidio_get_stats64(struct net_device *netdev, } /** - * \brief Handler for SIOCSHWTSTAMP ioctl - * @param netdev network device - * @param ifr interface request - * @param cmd command + * hwtstamp_ioctl - Handler for SIOCSHWTSTAMP ioctl + * @netdev: network device + * @ifr: interface request */ static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) { @@ -2154,10 +2151,10 @@ static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) } /** - * \brief ioctl handler - * @param netdev network device - * @param ifr interface request - * @param cmd command + * liquidio_ioctl - ioctl handler + * @netdev: network device + * @ifr: interface request + * @cmd: command */ static int liquidio_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { @@ -2174,9 +2171,10 @@ static int liquidio_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) } /** - * \brief handle a Tx timestamp response - * @param status response status - * @param buf pointer to skb + * handle_timestamp - handle a Tx timestamp response + * @oct: octeon device + * @status: response status + * @buf: pointer to skb */ static void handle_timestamp(struct octeon_device *oct, u32 status, @@ -2217,10 +2215,12 @@ static void handle_timestamp(struct octeon_device *oct, tx_buffer_free(skb); } -/* \brief Send a data packet that will be timestamped - * @param oct octeon device - * @param ndata pointer to network data - * @param finfo pointer to private network data +/** + * send_nic_timestamp_pkt - Send a data packet that will be timestamped + * @oct: octeon device + * @ndata: pointer to network data + * @finfo: pointer to private network data + * @xmit_more: more is coming */ static inline int send_nic_timestamp_pkt(struct octeon_device *oct, struct octnic_data_pkt *ndata, @@ -2276,10 +2276,12 @@ static inline int send_nic_timestamp_pkt(struct octeon_device *oct, return retval; } -/** \brief Transmit networks packets to the Octeon interface - * @param skbuff skbuff struct to be passed to network layer. - * @param netdev pointer to network device - * @returns whether the packet was transmitted to the device okay or not +/** + * liquidio_xmit - Transmit networks packets to the Octeon interface + * @skb: skbuff struct to be passed to network layer. + * @netdev: pointer to network device + * + * Return: whether the packet was transmitted to the device okay or not * (NETDEV_TX_OK or NETDEV_TX_BUSY) */ static netdev_tx_t liquidio_xmit(struct sk_buff *skb, struct net_device *netdev) @@ -2524,8 +2526,10 @@ lio_xmit_failed: return NETDEV_TX_OK; } -/** \brief Network device Tx timeout - * @param netdev pointer to network device +/** + * liquidio_tx_timeout - Network device Tx timeout + * @netdev: pointer to network device + * @txqueue: index of the hung transmit queue */ static void liquidio_tx_timeout(struct net_device *netdev, unsigned int txqueue) { @@ -2597,12 +2601,12 @@ static int liquidio_vlan_rx_kill_vid(struct net_device *netdev, return ret; } -/** Sending command to enable/disable RX checksum offload - * @param netdev pointer to network device - * @param command OCTNET_CMD_TNL_RX_CSUM_CTL - * @param rx_cmd_bit OCTNET_CMD_RXCSUM_ENABLE/ - * OCTNET_CMD_RXCSUM_DISABLE - * @returns SUCCESS or FAILURE +/** + * liquidio_set_rxcsum_command - Sending command to enable/disable RX checksum offload + * @netdev: pointer to network device + * @command: OCTNET_CMD_TNL_RX_CSUM_CTL + * @rx_cmd: OCTNET_CMD_RXCSUM_ENABLE/OCTNET_CMD_RXCSUM_DISABLE + * Returns: SUCCESS or FAILURE */ static int liquidio_set_rxcsum_command(struct net_device *netdev, int command, u8 rx_cmd) @@ -2632,13 +2636,14 @@ static int liquidio_set_rxcsum_command(struct net_device *netdev, int command, return ret; } -/** Sending command to add/delete VxLAN UDP port to firmware - * @param netdev pointer to network device - * @param command OCTNET_CMD_VXLAN_PORT_CONFIG - * @param vxlan_port VxLAN port to be added or deleted - * @param vxlan_cmd_bit OCTNET_CMD_VXLAN_PORT_ADD, +/** + * liquidio_vxlan_port_command - Sending command to add/delete VxLAN UDP port to firmware + * @netdev: pointer to network device + * @command: OCTNET_CMD_VXLAN_PORT_CONFIG + * @vxlan_port: VxLAN port to be added or deleted + * @vxlan_cmd_bit: OCTNET_CMD_VXLAN_PORT_ADD, * OCTNET_CMD_VXLAN_PORT_DEL - * @returns SUCCESS or FAILURE + * Return: SUCCESS or FAILURE */ static int liquidio_vxlan_port_command(struct net_device *netdev, int command, u16 vxlan_port, u8 vxlan_cmd_bit) @@ -2698,10 +2703,11 @@ static const struct udp_tunnel_nic_info liquidio_udp_tunnels = { }, }; -/** \brief Net device fix features - * @param netdev pointer to network device - * @param request features requested - * @returns updated features list +/** + * liquidio_fix_features - Net device fix features + * @netdev: pointer to network device + * @request: features requested + * Return: updated features list */ static netdev_features_t liquidio_fix_features(struct net_device *netdev, netdev_features_t request) @@ -2737,9 +2743,10 @@ static netdev_features_t liquidio_fix_features(struct net_device *netdev, return request; } -/** \brief Net device set features - * @param netdev pointer to network device - * @param features features to enable/disable +/** + * liquidio_set_features - Net device set features + * @netdev: pointer to network device + * @features: features to enable/disable */ static int liquidio_set_features(struct net_device *netdev, netdev_features_t features) @@ -3224,7 +3231,8 @@ static const struct net_device_ops lionetdevops = { .ndo_get_port_parent_id = liquidio_get_port_parent_id, }; -/** \brief Entry point for the liquidio module +/** + * liquidio_init - Entry point for the liquidio module */ static int __init liquidio_init(void) { @@ -3307,8 +3315,8 @@ nic_info_err: } /** - * \brief Setup network interfaces - * @param octeon_dev octeon device + * setup_nic_devices - Setup network interfaces + * @octeon_dev: octeon device * * Called during init time for each device. It assumes the NIC * is already up and running. The link information for each @@ -3872,8 +3880,8 @@ static int liquidio_enable_sriov(struct pci_dev *dev, int num_vfs) #endif /** - * \brief initialize the NIC - * @param oct octeon device + * liquidio_init_nic_module - initialize the NIC + * @oct: octeon device * * This initialization routine is called once the Octeon device application is * up and running @@ -3928,9 +3936,10 @@ octnet_init_failure: } /** - * \brief starter callback that invokes the remaining initialization work after - * the NIC is up and running. - * @param octptr work struct work_struct + * nic_starter - finish init + * @work: work struct work_struct + * + * starter callback that invokes the remaining initialization work after the NIC is up and running. */ static void nic_starter(struct work_struct *work) { @@ -4023,8 +4032,8 @@ octeon_recv_vf_drv_notice(struct octeon_recv_info *recv_info, void *buf) } /** - * \brief Device initialization for each Octeon device that is probed - * @param octeon_dev octeon device + * octeon_device_init - Device initialization for each Octeon device that is probed + * @octeon_dev: octeon device */ static int octeon_device_init(struct octeon_device *octeon_dev) { @@ -4303,11 +4312,11 @@ static int octeon_device_init(struct octeon_device *octeon_dev) } /** - * \brief Debug console print function - * @param octeon_dev octeon device - * @param console_num console number - * @param prefix first portion of line to display - * @param suffix second portion of line to display + * octeon_dbg_console_print - Debug console print function + * @oct: octeon device + * @console_num: console number + * @prefix: first portion of line to display + * @suffix: second portion of line to display * * The OCTEON debug console outputs entire lines (excluding '\n'). * Normally, the line will be passed in the 'prefix' parameter. @@ -4330,7 +4339,7 @@ static int octeon_dbg_console_print(struct octeon_device *oct, u32 console_num, } /** - * \brief Exits the module + * liquidio_exit - Exits the module */ static void __exit liquidio_exit(void) { diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c index 8c5879e31240..103440f97bc8 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c @@ -99,8 +99,8 @@ static int lio_wait_for_oq_pkts(struct octeon_device *oct) } /** - * \brief Cause device to go quiet so it can be safely removed/reset/etc - * @param oct Pointer to Octeon device + * pcierror_quiesce_device - Cause device to go quiet so it can be safely removed/reset/etc + * @oct: Pointer to Octeon device */ static void pcierror_quiesce_device(struct octeon_device *oct) { @@ -143,8 +143,8 @@ static void pcierror_quiesce_device(struct octeon_device *oct) } /** - * \brief Cleanup PCI AER uncorrectable error status - * @param dev Pointer to PCI device + * cleanup_aer_uncorrect_error_status - Cleanup PCI AER uncorrectable error status + * @dev: Pointer to PCI device */ static void cleanup_aer_uncorrect_error_status(struct pci_dev *dev) { @@ -163,8 +163,8 @@ static void cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } /** - * \brief Stop all PCI IO to a given device - * @param dev Pointer to Octeon device + * stop_pci_io - Stop all PCI IO to a given device + * @oct: Pointer to Octeon device */ static void stop_pci_io(struct octeon_device *oct) { @@ -205,9 +205,9 @@ static void stop_pci_io(struct octeon_device *oct) } /** - * \brief called when PCI error is detected - * @param pdev Pointer to PCI device - * @param state The current pci connection state + * liquidio_pcie_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state * * This function is called after a PCI bus error affecting * this device has been detected. @@ -256,8 +256,8 @@ static struct pci_driver liquidio_vf_pci_driver = { }; /** - * \brief Print link information - * @param netdev network device + * print_link_info - Print link information + * @netdev: network device */ static void print_link_info(struct net_device *netdev) { @@ -278,8 +278,8 @@ static void print_link_info(struct net_device *netdev) } /** - * \brief Routine to notify MTU change - * @param work work_struct data structure + * octnet_link_status_change - Routine to notify MTU change + * @work: work_struct data structure */ static void octnet_link_status_change(struct work_struct *work) { @@ -296,8 +296,8 @@ static void octnet_link_status_change(struct work_struct *work) } /** - * \brief Sets up the mtu status change work - * @param netdev network device + * setup_link_status_change_wq - Sets up the mtu status change work + * @netdev: network device */ static int setup_link_status_change_wq(struct net_device *netdev) { @@ -328,9 +328,9 @@ static void cleanup_link_status_change_wq(struct net_device *netdev) } /** - * \brief Update link status - * @param netdev network device - * @param ls link status structure + * update_link_status - Update link status + * @netdev: network device + * @ls: link status structure * * Called on receipt of a link status response from the core application to * update each interface's link status. @@ -374,13 +374,13 @@ static void update_link_status(struct net_device *netdev, } /** - * \brief PCI probe handler - * @param pdev PCI device structure - * @param ent unused + * liquidio_vf_probe - PCI probe handler + * @pdev: PCI device structure + * @ent: unused */ static int liquidio_vf_probe(struct pci_dev *pdev, - const struct pci_device_id *ent __attribute__((unused))) + const struct pci_device_id __maybe_unused *ent) { struct octeon_device *oct_dev = NULL; @@ -416,8 +416,8 @@ liquidio_vf_probe(struct pci_dev *pdev, } /** - * \brief PCI FLR for each Octeon device. - * @param oct octeon device + * octeon_pci_flr - PCI FLR for each Octeon device. + * @oct: octeon device */ static void octeon_pci_flr(struct octeon_device *oct) { @@ -437,9 +437,8 @@ static void octeon_pci_flr(struct octeon_device *oct) } /** - *\brief Destroy resources associated with octeon device - * @param pdev PCI device structure - * @param ent unused + * octeon_destroy_resources - Destroy resources associated with octeon device + * @oct: octeon device */ static void octeon_destroy_resources(struct octeon_device *oct) { @@ -592,9 +591,9 @@ static void octeon_destroy_resources(struct octeon_device *oct) } /** - * \brief Send Rx control command - * @param lio per-network private data - * @param start_stop whether to start or stop + * send_rx_ctrl_cmd - Send Rx control command + * @lio: per-network private data + * @start_stop: whether to start or stop */ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) { @@ -644,9 +643,9 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) } /** - * \brief Destroy NIC device interface - * @param oct octeon device - * @param ifidx which interface to destroy + * liquidio_destroy_nic_device - Destroy NIC device interface + * @oct: octeon device + * @ifidx: which interface to destroy * * Cleanup associated with each interface for an Octeon device when NIC * module is being unloaded or if initialization fails during load. @@ -704,8 +703,8 @@ static void liquidio_destroy_nic_device(struct octeon_device *oct, int ifidx) } /** - * \brief Stop complete NIC functionality - * @param oct octeon device + * liquidio_stop_nic_module - Stop complete NIC functionality + * @oct: octeon device */ static int liquidio_stop_nic_module(struct octeon_device *oct) { @@ -737,8 +736,8 @@ static int liquidio_stop_nic_module(struct octeon_device *oct) } /** - * \brief Cleans up resources at unload time - * @param pdev PCI device structure + * liquidio_vf_remove - Cleans up resources at unload time + * @pdev: PCI device structure */ static void liquidio_vf_remove(struct pci_dev *pdev) { @@ -763,8 +762,8 @@ static void liquidio_vf_remove(struct pci_dev *pdev) } /** - * \brief PCI initialization for each Octeon device. - * @param oct octeon device + * octeon_pci_os_setup - PCI initialization for each Octeon device. + * @oct: octeon device */ static int octeon_pci_os_setup(struct octeon_device *oct) { @@ -792,8 +791,8 @@ static int octeon_pci_os_setup(struct octeon_device *oct) } /** - * \brief Unmap and free network buffer - * @param buf buffer + * free_netbuf - Unmap and free network buffer + * @buf: buffer */ static void free_netbuf(void *buf) { @@ -812,8 +811,8 @@ static void free_netbuf(void *buf) } /** - * \brief Unmap and free gather buffer - * @param buf buffer + * free_netsgbuf - Unmap and free gather buffer + * @buf: buffer */ static void free_netsgbuf(void *buf) { @@ -853,8 +852,8 @@ static void free_netsgbuf(void *buf) } /** - * \brief Unmap and free gather buffer with response - * @param buf buffer + * free_netsgbuf_with_resp - Unmap and free gather buffer with response + * @buf: buffer */ static void free_netsgbuf_with_resp(void *buf) { @@ -897,8 +896,8 @@ static void free_netsgbuf_with_resp(void *buf) } /** - * \brief Net device open for LiquidIO - * @param netdev network device + * liquidio_open - Net device open for LiquidIO + * @netdev: network device */ static int liquidio_open(struct net_device *netdev) { @@ -941,8 +940,8 @@ static int liquidio_open(struct net_device *netdev) } /** - * \brief Net device stop for LiquidIO - * @param netdev network device + * liquidio_stop - jNet device stop for LiquidIO + * @netdev: network device */ static int liquidio_stop(struct net_device *netdev) { @@ -991,8 +990,8 @@ static int liquidio_stop(struct net_device *netdev) } /** - * \brief Converts a mask based on net device flags - * @param netdev network device + * get_new_flags - Converts a mask based on net device flags + * @netdev: network device * * This routine generates a octnet_ifflags mask from the net device flags * received from the OS. @@ -1060,8 +1059,8 @@ static void liquidio_set_uc_list(struct net_device *netdev) } /** - * \brief Net device set_multicast_list - * @param netdev network device + * liquidio_set_mcast_list - Net device set_multicast_list + * @netdev: network device */ static void liquidio_set_mcast_list(struct net_device *netdev) { @@ -1110,8 +1109,9 @@ static void liquidio_set_mcast_list(struct net_device *netdev) } /** - * \brief Net device set_mac_address - * @param netdev network device + * liquidio_set_mac - Net device set_mac_address + * @netdev: network device + * @p: opaque pointer to sockaddr */ static int liquidio_set_mac(struct net_device *netdev, void *p) { @@ -1229,10 +1229,9 @@ liquidio_get_stats64(struct net_device *netdev, } /** - * \brief Handler for SIOCSHWTSTAMP ioctl - * @param netdev network device - * @param ifr interface request - * @param cmd command + * hwtstamp_ioctl - Handler for SIOCSHWTSTAMP ioctl + * @netdev: network device + * @ifr: interface request */ static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) { @@ -1287,10 +1286,10 @@ static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) } /** - * \brief ioctl handler - * @param netdev network device - * @param ifr interface request - * @param cmd command + * liquidio_ioctl - ioctl handler + * @netdev: network device + * @ifr: interface request + * @cmd: command */ static int liquidio_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { @@ -1339,10 +1338,10 @@ static void handle_timestamp(struct octeon_device *oct, u32 status, void *buf) tx_buffer_free(skb); } -/* \brief Send a data packet that will be timestamped - * @param oct octeon device - * @param ndata pointer to network data - * @param finfo pointer to private network data +/* send_nic_timestamp_pkt - Send a data packet that will be timestamped + * @oct: octeon device + * @ndata: pointer to network data + * @finfo: pointer to private network data */ static int send_nic_timestamp_pkt(struct octeon_device *oct, struct octnic_data_pkt *ndata, @@ -1393,9 +1392,10 @@ static int send_nic_timestamp_pkt(struct octeon_device *oct, return retval; } -/** \brief Transmit networks packets to the Octeon interface - * @param skbuff skbuff struct to be passed to network layer. - * @param netdev pointer to network device +/** + * liquidio_xmit - Transmit networks packets to the Octeon interface + * @skb: skbuff struct to be passed to network layer. + * @netdev: pointer to network device * @returns whether the packet was transmitted to the device okay or not * (NETDEV_TX_OK or NETDEV_TX_BUSY) */ @@ -1623,8 +1623,10 @@ lio_xmit_failed: return NETDEV_TX_OK; } -/** \brief Network device Tx timeout - * @param netdev pointer to network device +/** + * liquidio_tx_timeout - Network device Tx timeout + * @netdev: pointer to network device + * @txqueue: index of the hung transmit queue */ static void liquidio_tx_timeout(struct net_device *netdev, unsigned int txqueue) { @@ -1917,8 +1919,8 @@ nic_info_err: } /** - * \brief Setup network interfaces - * @param octeon_dev octeon device + * setup_nic_devices - Setup network interfaces + * @octeon_dev: octeon device * * Called during init time for each device. It assumes the NIC * is already up and running. The link information for each @@ -2229,8 +2231,8 @@ setup_nic_dev_done: } /** - * \brief initialize the NIC - * @param oct octeon device + * liquidio_init_nic_module - initialize the NIC + * @oct: octeon device * * This initialization routine is called once the Octeon device application is * up and running @@ -2270,8 +2272,8 @@ octnet_init_failure: } /** - * \brief Device initialization for each Octeon device that is probed - * @param octeon_dev octeon device + * octeon_device_init - Device initialization for each Octeon device that is probed + * @oct: octeon device */ static int octeon_device_init(struct octeon_device *oct) { diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_console.c b/drivers/net/ethernet/cavium/liquidio/octeon_console.c index 0d2831d10f65..28feabec8fbb 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_console.c +++ b/drivers/net/ethernet/cavium/liquidio/octeon_console.c @@ -15,7 +15,7 @@ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or * NONINFRINGEMENT. See the GNU General Public License for more details. ***********************************************************************/ -/** +/* * @file octeon_console.c */ #include <linux/moduleparam.h> @@ -131,7 +131,7 @@ struct octeon_pci_console_desc { /* Implicit storage for console_addr_array */ }; -/** +/* * This function is the implementation of the get macros defined * for individual structure members. The argument are generated * by the macros inorder to read only the needed memory. @@ -160,7 +160,7 @@ static inline u64 __cvmx_bootmem_desc_get(struct octeon_device *oct, } } -/** +/* * This function retrieves the string name of a named block. It is * more complicated than a simple memcpy() since the named block * descriptor may not be directly accessible. @@ -182,7 +182,7 @@ static void CVMX_BOOTMEM_NAMED_GET_NAME(struct octeon_device *oct, /* See header file for descriptions of functions */ -/** +/* * Check the version information on the bootmem descriptor * * @param exact_match @@ -323,7 +323,7 @@ static u64 cvmx_bootmem_phy_named_block_find(struct octeon_device *oct, return result; } -/** +/* * Find a named block on the remote Octeon * * @param name Name of block to find @@ -707,7 +707,7 @@ int octeon_add_console(struct octeon_device *oct, u32 console_num, return ret; } -/** +/* * Removes all consoles * * @param oct octeon device diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_device.c b/drivers/net/ethernet/cavium/liquidio/octeon_device.c index fbde7c58c4db..387a57cbfb73 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_device.c +++ b/drivers/net/ethernet/cavium/liquidio/octeon_device.c @@ -1307,7 +1307,7 @@ struct octeon_config *octeon_get_conf(struct octeon_device *oct) /* scratch register address is same in all the OCT-II and CN70XX models */ #define CNXX_SLI_SCRATCH1 0x3C0 -/** Get the octeon device pointer. +/* Get the octeon device pointer. * @param octeon_id - The id for which the octeon device pointer is required. * @return Success: Octeon device pointer. * @return Failure: NULL. @@ -1410,7 +1410,7 @@ int octeon_wait_for_ddr_init(struct octeon_device *oct, u32 *timeout) return ret; } -/** Get the octeon id assigned to the octeon device passed as argument. +/* Get the octeon id assigned to the octeon device passed as argument. * This function is exported to other modules. * @param dev - octeon device pointer passed as a void *. * @return octeon device id diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_droq.c b/drivers/net/ethernet/cavium/liquidio/octeon_droq.c index cf4fe5b17f8a..d4080bddcb6b 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_droq.c +++ b/drivers/net/ethernet/cavium/liquidio/octeon_droq.c @@ -774,7 +774,7 @@ octeon_droq_process_packets(struct octeon_device *oct, return 0; } -/** +/* * Utility function to poll for packets. check_hw_for_packets must be * called before calling this routine. */ diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_mailbox.c b/drivers/net/ethernet/cavium/liquidio/octeon_mailbox.c index 614d07be7181..ad685f5d0a13 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_mailbox.c +++ b/drivers/net/ethernet/cavium/liquidio/octeon_mailbox.c @@ -28,7 +28,7 @@ /** * octeon_mbox_read: - * @oct: Pointer mailbox + * @mbox: Pointer mailbox * * Reads the 8-bytes of data from the mbox register * Writes back the acknowldgement inidcating completion of read @@ -285,7 +285,8 @@ static int octeon_mbox_process_cmd(struct octeon_mbox *mbox, } /** - *octeon_mbox_process_message: + * octeon_mbox_process_message + * @mbox: mailbox * * Process the received mbox message. */ diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 387c357e1b8e..6ed58bc12020 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -148,7 +148,7 @@ struct workqueue_struct *cxgb3_wq; /** * link_report - show link status and link speed/duplex - * @p: the port whose settings are to be reported + * @dev: the port whose settings are to be reported * * Shows the link status, speed, and duplex of a port. */ @@ -304,8 +304,8 @@ void t3_os_link_changed(struct adapter *adapter, int port_id, int link_stat, /** * t3_os_phymod_changed - handle PHY module changes - * @phy: the PHY reporting the module change - * @mod_type: new module type + * @adap: the adapter associated with the link change + * @port_id: the port index whose limk status has changed * * This is the OS-dependent handler for PHY module changes. It is * invoked when a PHY module is removed or inserted for any OS-specific @@ -1200,7 +1200,7 @@ static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features) /** * cxgb_up - enable the adapter - * @adapter: adapter being enabled + * @adap: adapter being enabled * * Called when the first port is enabled, this function performs the * actions necessary to make an adapter operational, such as completing diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c index a978a00acc1e..5bb3f0cb36ed 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c @@ -372,7 +372,7 @@ static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q, /** * free_rx_bufs - free the Rx buffers on an SGE free list * @pdev: the PCI device associated with the adapter - * @rxq: the SGE free list to clean up + * @q: the SGE free list to clean up * * Release the buffers on an SGE free-buffer Rx queue. HW fetching from * this queue should be stopped before calling this function. @@ -493,7 +493,7 @@ static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q) /** * refill_fl - refill an SGE free-buffer list - * @adapter: the adapter + * @adap: the adapter * @q: the free-list to refill * @n: the number of new buffers to allocate * @gfp: the gfp flags for allocating new buffers @@ -568,7 +568,7 @@ static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl) /** * recycle_rx_buf - recycle a receive buffer - * @adapter: the adapter + * @adap: the adapter * @q: the SGE free list * @idx: index of buffer to recycle * @@ -825,6 +825,7 @@ use_orig_buf: * get_packet_pg - return the next ingress packet buffer from a free list * @adap: the adapter that received the packet * @fl: the SGE free list holding the packet + * @q: the queue * @len: the packet length including any SGE padding * @drop_thres: # of remaining buffers before we start dropping packets * @@ -1173,6 +1174,7 @@ static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb, * @q: the Tx queue * @ndesc: number of descriptors the packet will occupy * @compl: the value of the COMPL bit to use + * @addr: address * * Generate a TX_PKT work request to send the supplied packet. */ @@ -1622,6 +1624,7 @@ static void setup_deferred_unmapping(struct sk_buff *skb, struct pci_dev *pdev, * @pidx: index of the first Tx descriptor to write * @gen: the generation value to use * @ndesc: number of descriptors the packet will occupy + * @addr: the address * * Write an offload work request to send the supplied packet. The packet * data already carry the work request with most fields populated. @@ -1883,7 +1886,7 @@ static inline void deliver_partial_bundle(struct t3cdev *tdev, /** * ofld_poll - NAPI handler for offload packets in interrupt mode - * @dev: the network device doing the polling + * @napi: the network device doing the polling * @budget: polling budget * * The NAPI handler for offload packets when a response queue is serviced @@ -2007,7 +2010,7 @@ static void restart_tx(struct sge_qset *qs) /** * cxgb3_arp_process - process an ARP request probing a private IP address - * @adapter: the adapter + * @pi: the port info * @skb: the skbuff containing the ARP request * * Check if the ARP request is probing the private IP address @@ -2069,7 +2072,8 @@ static void cxgb3_process_iscsi_prov_pack(struct port_info *pi, * @adap: the adapter * @rq: the response queue that received the packet * @skb: the packet - * @pad: amount of padding at the start of the buffer + * @pad: padding + * @lro: large receive offload * * Process an ingress ethernet pakcet and deliver it to the stack. * The padding is 2 if the packet was delivered in an Rx buffer and 0 @@ -2239,7 +2243,7 @@ static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags) /** * check_ring_db - check if we need to ring any doorbells - * @adapter: the adapter + * @adap: the adapter * @qs: the queue set whose Tx queues are to be examined * @sleeping: indicates which Tx queue sent GTS * @@ -2899,7 +2903,7 @@ void t3_sge_err_intr_handler(struct adapter *adapter) /** * sge_timer_tx - perform periodic maintenance of an SGE qset - * @data: the SGE queue set to maintain + * @t: a timer list containing the SGE queue set to maintain * * Runs periodically from a timer to perform maintenance of an SGE queue * set. It performs two tasks: @@ -2943,7 +2947,7 @@ static void sge_timer_tx(struct timer_list *t) /** * sge_timer_rx - perform periodic maintenance of an SGE qset - * @data: the SGE queue set to maintain + * @t: the timer list containing the SGE queue set to maintain * * a) Replenishes Rx queues that have run out due to memory shortage. * Normally new Rx buffers are added when existing ones are consumed but @@ -3021,7 +3025,7 @@ void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p) * @irq_vec_idx: the IRQ vector index for response queue interrupts * @p: configuration parameters for this queue set * @ntxq: number of Tx queues for the queue set - * @netdev: net device associated with this queue set + * @dev: net device associated with this queue set * @netdevq: net device TX queue associated with this queue set * * Allocate resources and initialize an SGE queue set. A queue set diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c index 311fed38c101..7ff31d1026fb 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c @@ -2484,6 +2484,7 @@ int t3_sge_disable_cqcntxt(struct adapter *adapter, unsigned int id) * @adapter: the adapter * @id: the context id * @op: the operation to perform + * @credits: credit value to write * * Perform the selected operation on an SGE completion queue context. * The caller is responsible for ensuring only one context operation @@ -2885,7 +2886,7 @@ static void init_cong_ctrl(unsigned short *a, unsigned short *b) * t3_load_mtus - write the MTU and congestion control HW tables * @adap: the adapter * @mtus: the unrestricted values for the MTU table - * @alphs: the values for the congestion control alpha parameter + * @alpha: the values for the congestion control alpha parameter * @beta: the values for the congestion control beta parameter * @mtu_cap: the maximum permitted effective MTU * @@ -3483,7 +3484,7 @@ static void get_pci_mode(struct adapter *adapter, struct pci_params *p) /** * init_link_config - initialize a link's SW state * @lc: structure holding the link state - * @ai: information about the current card + * @caps: information about the current card * * Initializes the SW state maintained for each link, including the link's * capabilities and default speed/duplex/flow-control/autonegotiation diff --git a/drivers/net/ethernet/cisco/enic/enic_api.c b/drivers/net/ethernet/cisco/enic/enic_api.c index b161f24522b8..89915681473c 100644 --- a/drivers/net/ethernet/cisco/enic/enic_api.c +++ b/drivers/net/ethernet/cisco/enic/enic_api.c @@ -1,4 +1,4 @@ -/** +/* * Copyright 2013 Cisco Systems, Inc. All rights reserved. * * This program is free software; you may redistribute it and/or modify diff --git a/drivers/net/ethernet/cisco/enic/enic_ethtool.c b/drivers/net/ethernet/cisco/enic/enic_ethtool.c index 4d8e0aa447fb..a4dd52bba2c3 100644 --- a/drivers/net/ethernet/cisco/enic/enic_ethtool.c +++ b/drivers/net/ethernet/cisco/enic/enic_ethtool.c @@ -1,4 +1,4 @@ -/** +/* * Copyright 2013 Cisco Systems, Inc. All rights reserved. * * This program is free software; you may redistribute it and/or modify diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c index 07e9dee03c98..8df6f081f244 100644 --- a/drivers/net/ethernet/cortina/gemini.c +++ b/drivers/net/ethernet/cortina/gemini.c @@ -85,6 +85,8 @@ MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); /** * struct gmac_queue_page - page buffer per-page info + * @page: the page struct + * @mapping: the dma address handle */ struct gmac_queue_page { struct page *page; diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index a817ca661c1f..0981fe9652e5 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -177,6 +177,7 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size"); * struct ethoc - driver-private device structure * @iobase: pointer to I/O memory region * @membase: pointer to buffer memory region + * @big_endian: just big or little (endian) * @num_bd: number of buffer descriptors * @num_tx: number of send buffers * @cur_tx: last send buffer written @@ -189,7 +190,10 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size"); * @msg_enable: device state flags * @lock: device lock * @mdio: MDIO bus for PHY access + * @clk: clock * @phy_id: address of attached PHY + * @old_link: previous link info + * @old_duplex: previous duplex info */ struct ethoc { void __iomem *iobase; @@ -1015,7 +1019,7 @@ static const struct net_device_ops ethoc_netdev_ops = { /** * ethoc_probe - initialize OpenCores ethernet MAC - * pdev: platform device + * @pdev: platform device */ static int ethoc_probe(struct platform_device *pdev) { diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 5bc965186f8c..32677521504c 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -1344,7 +1344,7 @@ static int dpaa2_eth_seed_pool(struct dpaa2_eth_priv *priv, u16 bpid) return 0; } -/** +/* * Drain the specified number of buffers from the DPNI's private buffer pool. * @count must not exceeed DPAA2_ETH_BUFS_PER_CMD */ diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 0405a3975f3f..2e344aada4c6 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -512,7 +512,7 @@ int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr) -EFAULT : 0; } -/** +/* * fec_time_keep - call timecounter_read every second to avoid timer overrun * because ENET just support 32bit counter, will timeout in 4s */ @@ -566,7 +566,8 @@ static irqreturn_t fec_pps_interrupt(int irq, void *dev_id) /** * fec_ptp_init - * @ndev: The FEC network adapter + * @pdev: The FEC network adapter + * @irq_idx: the interrupt index * * This function performs the required steps for enabling ptp * support. If ptp support has already been loaded it simply calls the diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c index ef67e8599b39..ce0a121580f6 100644 --- a/drivers/net/ethernet/freescale/fman/fman.c +++ b/drivers/net/ethernet/freescale/fman/fman.c @@ -2063,11 +2063,11 @@ static int fman_set_exception(struct fman *fman, /** * fman_register_intr * @fman: A Pointer to FMan device - * @mod: Calling module + * @module: Calling module * @mod_id: Module id (if more than 1 exists, '0' if not) * @intr_type: Interrupt type (error/normal) selection. - * @f_isr: The interrupt service routine. - * @h_src_arg: Argument to be passed to f_isr. + * @isr_cb: The interrupt service routine. + * @src_arg: Argument to be passed to isr_cb. * * Used to register an event handler to be processed by FMan * @@ -2091,7 +2091,7 @@ EXPORT_SYMBOL(fman_register_intr); /** * fman_unregister_intr * @fman: A Pointer to FMan device - * @mod: Calling module + * @module: Calling module * @mod_id: Module id (if more than 1 exists, '0' if not) * @intr_type: Interrupt type (error/normal) selection. * @@ -2342,8 +2342,8 @@ EXPORT_SYMBOL(fman_get_bmi_max_fifo_size); /** * fman_get_revision - * @fman - Pointer to the FMan module - * @rev_info - A structure of revision information parameters. + * @fman: - Pointer to the FMan module + * @rev_info: - A structure of revision information parameters. * * Returns the FM revision * @@ -2508,7 +2508,7 @@ EXPORT_SYMBOL(fman_get_rx_extra_headroom); /** * fman_bind - * @dev: FMan OF device pointer + * @fm_dev: FMan OF device pointer * * Bind to a specific FMan device. * diff --git a/drivers/net/ethernet/freescale/fman/fman_muram.c b/drivers/net/ethernet/freescale/fman/fman_muram.c index 5ec94d243da0..7ad317e622bc 100644 --- a/drivers/net/ethernet/freescale/fman/fman_muram.c +++ b/drivers/net/ethernet/freescale/fman/fman_muram.c @@ -144,9 +144,9 @@ unsigned long fman_muram_alloc(struct muram_info *muram, size_t size) /** * fman_muram_free_mem - * muram: FM-MURAM module pointer. - * offset: offset of the memory region to be freed. - * size: size of the memory to be freed. + * @muram: FM-MURAM module pointer. + * @offset: offset of the memory region to be freed. + * @size: size of the memory to be freed. * * Free an allocated memory from FM-MURAM partition. */ diff --git a/drivers/net/ethernet/freescale/fman/fman_port.c b/drivers/net/ethernet/freescale/fman/fman_port.c index 624b2eb6f01d..d9baac0dbc7d 100644 --- a/drivers/net/ethernet/freescale/fman/fman_port.c +++ b/drivers/net/ethernet/freescale/fman/fman_port.c @@ -1410,9 +1410,11 @@ err_port_cfg: } EXPORT_SYMBOL(fman_port_config); -/** +/* * fman_port_use_kg_hash - * port: A pointer to a FM Port module. + * @port: A pointer to a FM Port module. + * @enable: enable or disable + * * Sets the HW KeyGen or the BMI as HW Parser next engine, enabling * or bypassing the KeyGen hashing of Rx traffic */ @@ -1430,7 +1432,8 @@ EXPORT_SYMBOL(fman_port_use_kg_hash); /** * fman_port_init - * port: A pointer to a FM Port module. + * @port: A pointer to a FM Port module. + * * Initializes the FM PORT module by defining the software structure and * configuring the hardware registers. * @@ -1524,8 +1527,8 @@ EXPORT_SYMBOL(fman_port_init); /** * fman_port_cfg_buf_prefix_content - * @port A pointer to a FM Port module. - * @buffer_prefix_content A structure of parameters describing + * @port: A pointer to a FM Port module. + * @buffer_prefix_content: A structure of parameters describing * the structure of the buffer. * Out parameter: * Start margin - offset of data from @@ -1570,7 +1573,7 @@ EXPORT_SYMBOL(fman_port_cfg_buf_prefix_content); /** * fman_port_disable - * port: A pointer to a FM Port module. + * @port: A pointer to a FM Port module. * * Gracefully disable an FM port. The port will not start new tasks after all * tasks associated with the port are terminated. @@ -1651,7 +1654,7 @@ EXPORT_SYMBOL(fman_port_disable); /** * fman_port_enable - * port: A pointer to a FM Port module. + * @port: A pointer to a FM Port module. * * A runtime routine provided to allow disable/enable of port. * @@ -1697,7 +1700,7 @@ EXPORT_SYMBOL(fman_port_enable); /** * fman_port_bind - * dev: FMan Port OF device pointer + * @dev: FMan Port OF device pointer * * Bind to a specific FMan Port. * @@ -1713,7 +1716,7 @@ EXPORT_SYMBOL(fman_port_bind); /** * fman_port_get_qman_channel_id - * port: Pointer to the FMan port devuce + * @port: Pointer to the FMan port devuce * * Get the QMan channel ID for the specific port * @@ -1727,7 +1730,7 @@ EXPORT_SYMBOL(fman_port_get_qman_channel_id); /** * fman_port_get_device - * port: Pointer to the FMan port device + * @port: Pointer to the FMan port device * * Get the 'struct device' associated to the specified FMan port device * diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c index 43427c5b9396..901749a7a318 100644 --- a/drivers/net/ethernet/freescale/fman/mac.c +++ b/drivers/net/ethernet/freescale/fman/mac.c @@ -359,8 +359,8 @@ EXPORT_SYMBOL(fman_set_mac_active_pause); /** * fman_get_pause_cfg * @mac_dev: A pointer to the MAC device - * @rx: Return value for RX setting - * @tx: Return value for TX setting + * @rx_pause: Return value for RX setting + * @tx_pause: Return value for TX setting * * Determine the MAC RX/TX PAUSE frames settings based on PHY * autonegotiation or values set by eththool. diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.c b/drivers/net/ethernet/hisilicon/hns/hnae.c index e017b7c34140..00fafc0f8512 100644 --- a/drivers/net/ethernet/hisilicon/hns/hnae.c +++ b/drivers/net/ethernet/hisilicon/hns/hnae.c @@ -270,7 +270,7 @@ static void hnae_fini_queue(struct hnae_queue *q) hnae_fini_ring(&q->rx_ring); } -/** +/* * ae_chain - define ae chain head */ static RAW_NOTIFIER_HEAD(ae_chain); diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c index 9a907947ba19..4a448138b4ec 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c @@ -374,11 +374,12 @@ static void hns_mac_param_get(struct mac_params *param, } /** - *hns_mac_queue_config_bc_en - set broadcast rx&tx enable - *@mac_cb: mac device - *@queue: queue number - *@en:enable - *retuen 0 - success , negative --fail + * hns_mac_queue_config_bc_en - set broadcast rx&tx enable + * @mac_cb: mac device + * @port_num: queue number + * @vlan_id: vlan id` + * @enable: enable + * return 0 - success , negative --fail */ static int hns_mac_port_config_bc_en(struct hns_mac_cb *mac_cb, u32 port_num, u16 vlan_id, bool enable) @@ -408,11 +409,11 @@ static int hns_mac_port_config_bc_en(struct hns_mac_cb *mac_cb, } /** - *hns_mac_vm_config_bc_en - set broadcast rx&tx enable - *@mac_cb: mac device - *@vmid: vm id - *@en:enable - *retuen 0 - success , negative --fail + * hns_mac_vm_config_bc_en - set broadcast rx&tx enable + * @mac_cb: mac device + * @vmid: vm id + * @enable: enable + * return 0 - success , negative --fail */ int hns_mac_vm_config_bc_en(struct hns_mac_cb *mac_cb, u32 vmid, bool enable) { @@ -542,8 +543,8 @@ void hns_mac_stop(struct hns_mac_cb *mac_cb) /** * hns_mac_get_autoneg - get auto autonegotiation * @mac_cb: mac control block - * @enable: enable or not - * retuen 0 - success , negative --fail + * @auto_neg: output pointer to autoneg result + * return 0 - success , negative --fail */ void hns_mac_get_autoneg(struct hns_mac_cb *mac_cb, u32 *auto_neg) { @@ -560,7 +561,7 @@ void hns_mac_get_autoneg(struct hns_mac_cb *mac_cb, u32 *auto_neg) * @mac_cb: mac control block * @rx_en: rx enable status * @tx_en: tx enable status - * retuen 0 - success , negative --fail + * return 0 - success , negative --fail */ void hns_mac_get_pauseparam(struct hns_mac_cb *mac_cb, u32 *rx_en, u32 *tx_en) { @@ -578,7 +579,7 @@ void hns_mac_get_pauseparam(struct hns_mac_cb *mac_cb, u32 *rx_en, u32 *tx_en) * hns_mac_set_autoneg - set auto autonegotiation * @mac_cb: mac control block * @enable: enable or not - * retuen 0 - success , negative --fail + * return 0 - success , negative --fail */ int hns_mac_set_autoneg(struct hns_mac_cb *mac_cb, u8 enable) { @@ -623,7 +624,7 @@ int hns_mac_set_pauseparam(struct hns_mac_cb *mac_cb, u32 rx_en, u32 tx_en) /** * hns_mac_init_ex - mac init * @mac_cb: mac control block - * retuen 0 - success , negative --fail + * return 0 - success , negative --fail */ static int hns_mac_init_ex(struct hns_mac_cb *mac_cb) { @@ -800,7 +801,6 @@ static const struct { /** *hns_mac_get_info - get mac information from device node *@mac_cb: mac device - *@np:device node * return: 0 --success, negative --fail */ static int hns_mac_get_info(struct hns_mac_cb *mac_cb) @@ -951,7 +951,7 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb) /** * hns_mac_get_mode - get mac mode * @phy_if: phy interface - * retuen 0 - gmac, 1 - xgmac , negative --fail + * return 0 - gmac, 1 - xgmac , negative --fail */ static int hns_mac_get_mode(phy_interface_t phy_if) { diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c index acfa86e5296f..87d3db4666df 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c @@ -207,7 +207,7 @@ static int hns_dsaf_get_cfg(struct dsaf_device *dsaf_dev) /** * hns_dsaf_sbm_link_sram_init_en - config dsaf_sbm_init_en - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_sbm_link_sram_init_en(struct dsaf_device *dsaf_dev) { @@ -216,8 +216,8 @@ static void hns_dsaf_sbm_link_sram_init_en(struct dsaf_device *dsaf_dev) /** * hns_dsaf_reg_cnt_clr_ce - config hns_dsaf_reg_cnt_clr_ce - * @dsaf_id: dsa fabric id - * @hns_dsaf_reg_cnt_clr_ce: config value + * @dsaf_dev: dsa fabric id + * @reg_cnt_clr_ce: config value */ static void hns_dsaf_reg_cnt_clr_ce(struct dsaf_device *dsaf_dev, u32 reg_cnt_clr_ce) @@ -228,8 +228,8 @@ hns_dsaf_reg_cnt_clr_ce(struct dsaf_device *dsaf_dev, u32 reg_cnt_clr_ce) /** * hns_ppe_qid_cfg - config ppe qid - * @dsaf_id: dsa fabric id - * @pppe_qid_cfg: value array + * @dsaf_dev: dsa fabric id + * @qid_cfg: value array */ static void hns_dsaf_ppe_qid_cfg(struct dsaf_device *dsaf_dev, u32 qid_cfg) @@ -285,8 +285,8 @@ static void hns_dsaf_inner_qid_cfg(struct dsaf_device *dsaf_dev) /** * hns_dsaf_sw_port_type_cfg - cfg sw type - * @dsaf_id: dsa fabric id - * @psw_port_type: array + * @dsaf_dev: dsa fabric id + * @port_type: array */ static void hns_dsaf_sw_port_type_cfg(struct dsaf_device *dsaf_dev, enum dsaf_sw_port_type port_type) @@ -303,8 +303,8 @@ static void hns_dsaf_sw_port_type_cfg(struct dsaf_device *dsaf_dev, /** * hns_dsaf_stp_port_type_cfg - cfg stp type - * @dsaf_id: dsa fabric id - * @pstp_port_type: array + * @dsaf_dev: dsa fabric id + * @port_type: array */ static void hns_dsaf_stp_port_type_cfg(struct dsaf_device *dsaf_dev, enum dsaf_stp_port_type port_type) @@ -323,7 +323,7 @@ static void hns_dsaf_stp_port_type_cfg(struct dsaf_device *dsaf_dev, (AE_IS_VER1((dev)->dsaf_ver) ? DSAF_SBM_NUM : DSAFV2_SBM_NUM) /** * hns_dsaf_sbm_cfg - config sbm - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_sbm_cfg(struct dsaf_device *dsaf_dev) { @@ -342,7 +342,7 @@ static void hns_dsaf_sbm_cfg(struct dsaf_device *dsaf_dev) /** * hns_dsaf_sbm_cfg_mib_en - config sbm - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static int hns_dsaf_sbm_cfg_mib_en(struct dsaf_device *dsaf_dev) { @@ -387,7 +387,7 @@ static int hns_dsaf_sbm_cfg_mib_en(struct dsaf_device *dsaf_dev) /** * hns_dsaf_sbm_bp_wl_cfg - config sbm - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_sbm_bp_wl_cfg(struct dsaf_device *dsaf_dev) { @@ -556,7 +556,7 @@ static void hns_dsafv2_sbm_bp_wl_cfg(struct dsaf_device *dsaf_dev) /** * hns_dsaf_voq_bp_all_thrd_cfg - voq - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_voq_bp_all_thrd_cfg(struct dsaf_device *dsaf_dev) { @@ -599,7 +599,7 @@ static void hns_dsaf_tbl_tcam_match_cfg( /** * hns_dsaf_tbl_tcam_data_cfg - tbl - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id * @ptbl_tcam_data: addr */ static void hns_dsaf_tbl_tcam_data_cfg( @@ -614,8 +614,8 @@ static void hns_dsaf_tbl_tcam_data_cfg( /** * dsaf_tbl_tcam_mcast_cfg - tbl - * @dsaf_id: dsa fabric id - * @ptbl_tcam_mcast: addr + * @dsaf_dev: dsa fabric id + * @mcast: addr */ static void hns_dsaf_tbl_tcam_mcast_cfg( struct dsaf_device *dsaf_dev, @@ -648,8 +648,8 @@ static void hns_dsaf_tbl_tcam_mcast_cfg( /** * hns_dsaf_tbl_tcam_ucast_cfg - tbl - * @dsaf_id: dsa fabric id - * @ptbl_tcam_ucast: addr + * @dsaf_dev: dsa fabric id + * @tbl_tcam_ucast: addr */ static void hns_dsaf_tbl_tcam_ucast_cfg( struct dsaf_device *dsaf_dev, @@ -674,8 +674,8 @@ static void hns_dsaf_tbl_tcam_ucast_cfg( /** * hns_dsaf_tbl_line_cfg - tbl - * @dsaf_id: dsa fabric id - * @ptbl_lin: addr + * @dsaf_dev: dsa fabric id + * @tbl_lin: addr */ static void hns_dsaf_tbl_line_cfg(struct dsaf_device *dsaf_dev, struct dsaf_tbl_line_cfg *tbl_lin) @@ -695,7 +695,7 @@ static void hns_dsaf_tbl_line_cfg(struct dsaf_device *dsaf_dev, /** * hns_dsaf_tbl_tcam_mcast_pul - tbl - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_tbl_tcam_mcast_pul(struct dsaf_device *dsaf_dev) { @@ -710,7 +710,7 @@ static void hns_dsaf_tbl_tcam_mcast_pul(struct dsaf_device *dsaf_dev) /** * hns_dsaf_tbl_line_pul - tbl - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_tbl_line_pul(struct dsaf_device *dsaf_dev) { @@ -725,7 +725,7 @@ static void hns_dsaf_tbl_line_pul(struct dsaf_device *dsaf_dev) /** * hns_dsaf_tbl_tcam_data_mcast_pul - tbl - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_tbl_tcam_data_mcast_pul( struct dsaf_device *dsaf_dev) @@ -743,7 +743,7 @@ static void hns_dsaf_tbl_tcam_data_mcast_pul( /** * hns_dsaf_tbl_tcam_data_ucast_pul - tbl - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_tbl_tcam_data_ucast_pul( struct dsaf_device *dsaf_dev) @@ -768,8 +768,7 @@ void hns_dsaf_set_promisc_mode(struct dsaf_device *dsaf_dev, u32 en) /** * hns_dsaf_tbl_stat_en - tbl - * @dsaf_id: dsa fabric id - * @ptbl_stat_en: addr + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_tbl_stat_en(struct dsaf_device *dsaf_dev) { @@ -785,7 +784,7 @@ static void hns_dsaf_tbl_stat_en(struct dsaf_device *dsaf_dev) /** * hns_dsaf_rocee_bp_en - rocee back press enable - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_rocee_bp_en(struct dsaf_device *dsaf_dev) { @@ -852,9 +851,9 @@ static void hns_dsaf_int_tbl_src_clr(struct dsaf_device *dsaf_dev, /** * hns_dsaf_single_line_tbl_cfg - INT - * @dsaf_id: dsa fabric id - * @address: - * @ptbl_line: + * @dsaf_dev: dsa fabric id + * @address: the address + * @ptbl_line: the line */ static void hns_dsaf_single_line_tbl_cfg( struct dsaf_device *dsaf_dev, @@ -876,9 +875,10 @@ static void hns_dsaf_single_line_tbl_cfg( /** * hns_dsaf_tcam_uc_cfg - INT - * @dsaf_id: dsa fabric id - * @address, - * @ptbl_tcam_data, + * @dsaf_dev: dsa fabric id + * @address: the address + * @ptbl_tcam_data: the data + * @ptbl_tcam_ucast: unicast */ static void hns_dsaf_tcam_uc_cfg( struct dsaf_device *dsaf_dev, u32 address, @@ -904,7 +904,8 @@ static void hns_dsaf_tcam_uc_cfg( * @dsaf_dev: dsa fabric device struct pointer * @address: tcam index * @ptbl_tcam_data: tcam data struct pointer - * @ptbl_tcam_mcast: tcam mask struct pointer, it must be null for HNSv1 + * @ptbl_tcam_mask: tcam mask struct pointer, it must be null for HNSv1 + * @ptbl_tcam_mcast: tcam data struct pointer */ static void hns_dsaf_tcam_mc_cfg( struct dsaf_device *dsaf_dev, u32 address, @@ -933,8 +934,10 @@ static void hns_dsaf_tcam_mc_cfg( /** * hns_dsaf_tcam_uc_cfg_vague - INT * @dsaf_dev: dsa fabric device struct pointer - * @address, - * @ptbl_tcam_data, + * @address: the address + * @tcam_data: the data + * @tcam_mask: the mask + * @tcam_uc: the unicast data */ static void hns_dsaf_tcam_uc_cfg_vague(struct dsaf_device *dsaf_dev, u32 address, @@ -960,10 +963,10 @@ static void hns_dsaf_tcam_uc_cfg_vague(struct dsaf_device *dsaf_dev, /** * hns_dsaf_tcam_mc_cfg_vague - INT * @dsaf_dev: dsa fabric device struct pointer - * @address, - * @ptbl_tcam_data, - * @ptbl_tcam_mask - * @ptbl_tcam_mcast + * @address: the address + * @tcam_data: the data + * @tcam_mask: the mask + * @tcam_mc: the multicast data */ static void hns_dsaf_tcam_mc_cfg_vague(struct dsaf_device *dsaf_dev, u32 address, @@ -988,8 +991,8 @@ static void hns_dsaf_tcam_mc_cfg_vague(struct dsaf_device *dsaf_dev, /** * hns_dsaf_tcam_mc_invld - INT - * @dsaf_id: dsa fabric id - * @address + * @dsaf_dev: dsa fabric id + * @address: the address */ static void hns_dsaf_tcam_mc_invld(struct dsaf_device *dsaf_dev, u32 address) { @@ -1024,10 +1027,10 @@ hns_dsaf_tcam_addr_get(struct dsaf_drv_tbl_tcam_key *mac_key, u8 *addr) /** * hns_dsaf_tcam_uc_get - INT - * @dsaf_id: dsa fabric id - * @address - * @ptbl_tcam_data - * @ptbl_tcam_ucast + * @dsaf_dev: dsa fabric id + * @address: the address + * @ptbl_tcam_data: the data + * @ptbl_tcam_ucast: unicast */ static void hns_dsaf_tcam_uc_get( struct dsaf_device *dsaf_dev, u32 address, @@ -1077,10 +1080,10 @@ static void hns_dsaf_tcam_uc_get( /** * hns_dsaf_tcam_mc_get - INT - * @dsaf_id: dsa fabric id - * @address - * @ptbl_tcam_data - * @ptbl_tcam_ucast + * @dsaf_dev: dsa fabric id + * @address: the address + * @ptbl_tcam_data: the data + * @ptbl_tcam_mcast: tcam multicast data */ static void hns_dsaf_tcam_mc_get( struct dsaf_device *dsaf_dev, u32 address, @@ -1127,7 +1130,7 @@ static void hns_dsaf_tcam_mc_get( /** * hns_dsaf_tbl_line_init - INT - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_tbl_line_init(struct dsaf_device *dsaf_dev) { @@ -1141,7 +1144,7 @@ static void hns_dsaf_tbl_line_init(struct dsaf_device *dsaf_dev) /** * hns_dsaf_tbl_tcam_init - INT - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_tbl_tcam_init(struct dsaf_device *dsaf_dev) { @@ -1156,7 +1159,9 @@ static void hns_dsaf_tbl_tcam_init(struct dsaf_device *dsaf_dev) /** * hns_dsaf_pfc_en_cfg - dsaf pfc pause cfg - * @mac_cb: mac contrl block + * @dsaf_dev: dsa fabric id + * @mac_id: mac contrl block + * @tc_en: traffic class */ static void hns_dsaf_pfc_en_cfg(struct dsaf_device *dsaf_dev, int mac_id, int tc_en) @@ -1209,8 +1214,7 @@ void hns_dsaf_get_rx_mac_pause_en(struct dsaf_device *dsaf_dev, int mac_id, /** * hns_dsaf_tbl_tcam_init - INT - * @dsaf_id: dsa fabric id - * @dsaf_mode + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_comm_init(struct dsaf_device *dsaf_dev) { @@ -1263,7 +1267,7 @@ static void hns_dsaf_comm_init(struct dsaf_device *dsaf_dev) /** * hns_dsaf_inode_init - INT - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_inode_init(struct dsaf_device *dsaf_dev) { @@ -1315,7 +1319,7 @@ static void hns_dsaf_inode_init(struct dsaf_device *dsaf_dev) /** * hns_dsaf_sbm_init - INT - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static int hns_dsaf_sbm_init(struct dsaf_device *dsaf_dev) { @@ -1369,7 +1373,7 @@ static int hns_dsaf_sbm_init(struct dsaf_device *dsaf_dev) /** * hns_dsaf_tbl_init - INT - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_tbl_init(struct dsaf_device *dsaf_dev) { @@ -1381,7 +1385,7 @@ static void hns_dsaf_tbl_init(struct dsaf_device *dsaf_dev) /** * hns_dsaf_voq_init - INT - * @dsaf_id: dsa fabric id + * @dsaf_dev: dsa fabric id */ static void hns_dsaf_voq_init(struct dsaf_device *dsaf_dev) { @@ -1435,7 +1439,7 @@ static void hns_dsaf_remove_hw(struct dsaf_device *dsaf_dev) /** * hns_dsaf_init - init dsa fabric * @dsaf_dev: dsa fabric device struct pointer - * retuen 0 - success , negative --fail + * return 0 - success , negative --fail */ static int hns_dsaf_init(struct dsaf_device *dsaf_dev) { @@ -2099,7 +2103,7 @@ static struct dsaf_device *hns_dsaf_alloc_dev(struct device *dev, /** * hns_dsaf_free_dev - free dev mem - * @dev: struct device pointer + * @dsaf_dev: struct device pointer */ static void hns_dsaf_free_dev(struct dsaf_device *dsaf_dev) { @@ -2108,9 +2112,9 @@ static void hns_dsaf_free_dev(struct dsaf_device *dsaf_dev) /** * dsaf_pfc_unit_cnt - set pfc unit count - * @dsaf_id: dsa fabric id - * @pport_rate: value array - * @pdsaf_pfc_unit_cnt: value array + * @dsaf_dev: dsa fabric id + * @mac_id: id in use + * @rate: value array */ static void hns_dsaf_pfc_unit_cnt(struct dsaf_device *dsaf_dev, int mac_id, enum dsaf_port_rate_mode rate) @@ -2139,8 +2143,9 @@ static void hns_dsaf_pfc_unit_cnt(struct dsaf_device *dsaf_dev, int mac_id, /** * dsaf_port_work_rate_cfg - fifo - * @dsaf_id: dsa fabric id - * @xge_ge_work_mode + * @dsaf_dev: dsa fabric id + * @mac_id: mac contrl block + * @rate_mode: value array */ static void hns_dsaf_port_work_rate_cfg(struct dsaf_device *dsaf_dev, int mac_id, @@ -2253,7 +2258,8 @@ void hns_dsaf_update_stats(struct dsaf_device *dsaf_dev, u32 node_num) /** *hns_dsaf_get_regs - dump dsaf regs - *@dsaf_dev: dsaf device + *@ddev: dsaf device + *@port: port *@data:data for value of regs */ void hns_dsaf_get_regs(struct dsaf_device *ddev, u32 port, void *data) @@ -2690,6 +2696,7 @@ void hns_dsaf_get_stats(struct dsaf_device *ddev, u64 *data, int port) /** *hns_dsaf_get_sset_count - get dsaf string set count + *@dsaf_dev: dsaf device *@stringset: type of values in data *return dsaf string name count */ @@ -2711,6 +2718,7 @@ int hns_dsaf_get_sset_count(struct dsaf_device *dsaf_dev, int stringset) *@stringset:srting set index *@data:strings name value *@port:port index + *@dsaf_dev: dsaf device */ void hns_dsaf_get_strings(int stringset, u8 *data, int port, struct dsaf_device *dsaf_dev) @@ -2943,7 +2951,7 @@ int hns_dsaf_wait_pkt_clean(struct dsaf_device *dsaf_dev, int port) /** * dsaf_probe - probo dsaf dev * @pdev: dasf platform device - * retuen 0 - success , negative --fail + * return 0 - success , negative --fail */ static int hns_dsaf_probe(struct platform_device *pdev) { @@ -3038,8 +3046,8 @@ module_platform_driver(g_dsaf_driver); /** * hns_dsaf_roce_reset - reset dsaf and roce * @dsaf_fwnode: Pointer to framework node for the dasf - * @enable: false - request reset , true - drop reset - * retuen 0 - success , negative -fail + * @dereset: false - request reset , true - drop reset + * return 0 - success , negative -fail */ int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool dereset) { diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c index a769273b36f7..a9aca8c24e90 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c @@ -330,11 +330,12 @@ static void hns_dsaf_xge_srst_by_port_acpi(struct dsaf_device *dsaf_dev, * hns_dsaf_srst_chns - reset dsaf channels * @dsaf_dev: dsaf device struct pointer * @msk: xbar channels mask value: + * @dereset: false - request reset , true - drop reset + * * bit0-5 for xge0-5 * bit6-11 for ppe0-5 * bit12-17 for roce0-5 * bit18-19 for com/dfx - * @dereset: false - request reset , true - drop reset */ static void hns_dsaf_srst_chns(struct dsaf_device *dsaf_dev, u32 msk, bool dereset) @@ -353,11 +354,12 @@ hns_dsaf_srst_chns(struct dsaf_device *dsaf_dev, u32 msk, bool dereset) * hns_dsaf_srst_chns - reset dsaf channels * @dsaf_dev: dsaf device struct pointer * @msk: xbar channels mask value: + * @dereset: false - request reset , true - drop reset + * * bit0-5 for xge0-5 * bit6-11 for ppe0-5 * bit12-17 for roce0-5 * bit18-19 for com/dfx - * @dereset: false - request reset , true - drop reset */ static void hns_dsaf_srst_chns_acpi(struct dsaf_device *dsaf_dev, u32 msk, bool dereset) @@ -612,7 +614,8 @@ static int hns_mac_get_sfp_prsnt_acpi(struct hns_mac_cb *mac_cb, int *sfp_prsnt) /** * hns_mac_config_sds_loopback - set loop back for serdes * @mac_cb: mac control block - * retuen 0 == success + * @en: enable or disable + * return 0 == success */ static int hns_mac_config_sds_loopback(struct hns_mac_cb *mac_cb, bool en) { diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c index 2b34b553acf3..d0f8b1fff333 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c @@ -66,8 +66,8 @@ hns_ppe_common_get_ioaddr(struct ppe_common_cb *ppe_common) /** * hns_ppe_common_get_cfg - get ppe common config * @dsaf_dev: dasf device - * comm_index: common index - * retuen 0 - success , negative --fail + * @comm_index: common index + * return 0 - success , negative --fail */ static int hns_ppe_common_get_cfg(struct dsaf_device *dsaf_dev, int comm_index) { @@ -143,7 +143,7 @@ static void hns_ppe_set_vlan_strip(struct hns_ppe_cb *ppe_cb, int en) /** * hns_ppe_checksum_hw - set ppe checksum caculate - * @ppe_device: ppe device + * @ppe_cb: ppe device * @value: value */ static void hns_ppe_checksum_hw(struct hns_ppe_cb *ppe_cb, u32 value) @@ -179,7 +179,7 @@ static void hns_ppe_set_qid(struct ppe_common_cb *ppe_common, u32 qid) /** * hns_ppe_set_port_mode - set port mode - * @ppe_device: ppe device + * @ppe_cb: ppe device * @mode: port mode */ static void hns_ppe_set_port_mode(struct hns_ppe_cb *ppe_cb, @@ -344,7 +344,7 @@ static void hns_ppe_init_hw(struct hns_ppe_cb *ppe_cb) /** * ppe_uninit_hw - uninit ppe - * @ppe_device: ppe device + * @ppe_cb: ppe device */ static void hns_ppe_uninit_hw(struct hns_ppe_cb *ppe_cb) { @@ -384,7 +384,8 @@ void hns_ppe_uninit(struct dsaf_device *dsaf_dev) /** * hns_ppe_reset - reinit ppe/rcb hw * @dsaf_dev: dasf device - * retuen void + * @ppe_common_index: the index + * return void */ void hns_ppe_reset_common(struct dsaf_device *dsaf_dev, u8 ppe_common_index) { @@ -455,7 +456,7 @@ int hns_ppe_get_regs_count(void) /** * ppe_get_strings - get ppe srting - * @ppe_device: ppe device + * @ppe_cb: ppe device * @stringset: string set type * @data: output string */ @@ -513,7 +514,7 @@ void hns_ppe_get_stats(struct hns_ppe_cb *ppe_cb, u64 *data) /** * hns_ppe_init - init ppe device * @dsaf_dev: dasf device - * retuen 0 - success , negative --fail + * return 0 - success , negative --fail */ int hns_ppe_init(struct dsaf_device *dsaf_dev) { diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c index 5453597ec629..b6c8910cf7ba 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c @@ -34,7 +34,7 @@ /** *hns_rcb_wait_fbd_clean - clean fbd *@qs: ring struct pointer array - *@qnum: num of array + *@q_num: num of array *@flag: tx or rx flag */ void hns_rcb_wait_fbd_clean(struct hnae_queue **qs, int q_num, u32 flag) @@ -191,7 +191,8 @@ void hns_rcbv2_int_clr_hw(struct hnae_queue *q, u32 flag) /** *hns_rcb_ring_enable_hw - enable ring - *@ring: rcb ring + *@q: rcb ring + *@val: value to write */ void hns_rcb_ring_enable_hw(struct hnae_queue *q, u32 val) { @@ -844,7 +845,7 @@ void hns_rcb_update_stats(struct hnae_queue *queue) /** *hns_rcb_get_stats - get rcb statistic - *@ring: rcb ring + *@queue: rcb ring *@data:statistic value */ void hns_rcb_get_stats(struct hnae_queue *queue, u64 *data) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c index d832cd018c1c..7e3609ce112a 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c @@ -242,7 +242,8 @@ static void hns_xgmac_config_pad_and_crc(void *mac_drv, u8 newval) /** *hns_xgmac_pausefrm_cfg - set pause param about xgmac *@mac_drv: mac driver - *@newval:enable of pad and crc + *@rx_en: enable receive + *@tx_en: enable transmit */ static void hns_xgmac_pausefrm_cfg(void *mac_drv, u32 rx_en, u32 tx_en) { diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 3cdc65d38fb7..858cb293152a 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -752,6 +752,8 @@ static void hns_update_rx_rate(struct hnae_ring *ring) /** * smooth_alg - smoothing algrithm for adjusting coalesce parameter + * @new_param: new value + * @old_param: old value **/ static u32 smooth_alg(u32 new_param, u32 old_param) { @@ -1829,7 +1831,7 @@ static int hns_nic_uc_unsync(struct net_device *netdev, } /** - * nic_set_multicast_list - set mutl mac address + * hns_set_multicast_list - set mutl mac address * @ndev: net device * * return void diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c index 14e60c9e491d..7165da0ee9aa 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c @@ -462,7 +462,7 @@ static int __lb_clean_rings(struct hns_nic_priv *priv, } /** - * nic_run_loopback_test - run loopback test + * __lb_run_test - run loopback test * @ndev: net device * @loop_mode: loopback mode */ @@ -971,7 +971,7 @@ static void hns_get_strings(struct net_device *netdev, u32 stringset, u8 *data) } /** - * nic_get_sset_count - get string set count witch returned by nic_get_strings. + * hns_get_sset_count - get string set count returned by nic_get_strings * @netdev: net device * @stringset: string set index, 0: self test string; 1: statistics string. * @@ -1027,7 +1027,7 @@ static int hns_phy_led_set(struct net_device *netdev, int value) } /** - * nic_set_phys_id - set phy identify LED. + * hns_set_phys_id - set phy identify LED. * @netdev: net device * @state: LED state. * @@ -1125,7 +1125,7 @@ static void hns_get_regs(struct net_device *net_dev, struct ethtool_regs *cmd, } /** - * nic_get_regs_len - get total register len. + * hns_get_regs_len - get total register len. * @net_dev: net device * * Return total register len. diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c index 7df5d7d211d4..883d0d7c6858 100644 --- a/drivers/net/ethernet/hisilicon/hns_mdio.c +++ b/drivers/net/ethernet/hisilicon/hns_mdio.c @@ -210,7 +210,7 @@ static void hns_mdio_cmd_write(struct hns_mdio_device *mdio_dev, * @bus: mdio bus * @phy_id: phy id * @regnum: register num - * @value: register value + * @data: register value * * Return 0 on success, negative on failure */ @@ -273,7 +273,6 @@ static int hns_mdio_write(struct mii_bus *bus, * @bus: mdio bus * @phy_id: phy id * @regnum: register num - * @value: register value * * Return phy register value */ diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index 67d3d80b8366..cefbb2298004 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/** +/* * drivers/net/ethernet/micrel/ksx884x.c - Micrel KSZ8841/2 PCI Ethernet driver * * Copyright (c) 2009-2010 Micrel, Inc. @@ -959,7 +959,7 @@ struct ksz_sw_desc { * struct ksz_dma_buf - OS dependent DMA buffer data structure * @skb: Associated socket buffer. * @dma: Associated physical DMA address. - * len: Actual len used. + * @len: Actual len used. */ struct ksz_dma_buf { struct sk_buff *skb; @@ -1254,6 +1254,7 @@ struct ksz_port_info { * @multi_list_size: Multicast address list size. * @enabled: Indication of hardware enabled. * @rx_stop: Indication of receive process stop. + * @reserved2: none * @features: Hardware features to enable. * @overrides: Hardware features to override. * @parent: Pointer to parent, network device private structure. @@ -1447,7 +1448,7 @@ struct dev_info { * struct dev_priv - Network device private data structure * @adapter: Adapter device information. * @port: Port information. - * @monitor_time_info: Timer to monitor ports. + * @monitor_timer_info: Timer to monitor ports. * @proc_sem: Semaphore for proc accessing. * @id: Device ID. * @mii_if: MII interface information. @@ -1566,6 +1567,7 @@ static inline void hw_restore_intr(struct ksz_hw *hw, uint interrupt) /** * hw_block_intr - block hardware interrupts + * @hw: The hardware instance. * * This function blocks all interrupts of the hardware and returns the current * interrupt enable mask so that interrupts can be restored later. @@ -1818,6 +1820,7 @@ static void port_r_mib_cnt(struct ksz_hw *hw, int port, u16 addr, u64 *cnt) * port_r_mib_pkt - read dropped packet counts * @hw: The hardware instance. * @port: The port index. + * @last: last one * @cnt: Buffer to store the receive and transmit dropped packet counts. * * This routine reads the dropped packet counts of the port. @@ -1971,7 +1974,7 @@ static void port_cfg(struct ksz_hw *hw, int port, int offset, u16 bits, * port_chk_shift - check port bit * @hw: The hardware instance. * @port: The port index. - * @offset: The offset of the register. + * @addr: The offset of the register. * @shift: Number of bits to shift. * * This function checks whether the specified port is set in the register or @@ -1993,7 +1996,7 @@ static int port_chk_shift(struct ksz_hw *hw, int port, u32 addr, int shift) * port_cfg_shift - set port bit * @hw: The hardware instance. * @port: The port index. - * @offset: The offset of the register. + * @addr: The offset of the register. * @shift: Number of bits to shift. * @set: The flag indicating whether the port is to be set or not. * @@ -4424,6 +4427,8 @@ static int ksz_alloc_desc(struct dev_info *adapter) /** * free_dma_buf - release DMA buffer resources * @adapter: Adapter information structure. + * @dma_buf: pointer to buf + * @direction: to or from device * * This routine is just a helper function to release the DMA buffer resources. */ @@ -4561,6 +4566,7 @@ static void ksz_free_desc(struct dev_info *adapter) * ksz_free_buffers - free buffers used in the descriptors * @adapter: Adapter information structure. * @desc_info: Descriptor information structure. + * @direction: to or from device * * This local routine frees buffers used in the DMA buffers. */ @@ -4720,7 +4726,8 @@ static void send_packet(struct sk_buff *skb, struct net_device *dev) /** * transmit_cleanup - clean up transmit descriptors - * @dev: Network device. + * @hw_priv: Network device. + * @normal: break if owned * * This routine is called to clean up the transmitted buffers. */ @@ -4776,7 +4783,7 @@ static void transmit_cleanup(struct dev_info *hw_priv, int normal) /** * transmit_done - transmit done processing - * @dev: Network device. + * @hw_priv: Network device. * * This routine is called when the transmit interrupt is triggered, indicating * either a packet is sent successfully or there are transmit errors. @@ -4882,6 +4889,7 @@ unlock: /** * netdev_tx_timeout - transmit timeout processing * @dev: Network device. + * @txqueue: index of hanging queue * * This routine is called when the transmit timer expires. That indicates the * hardware is not running correctly because transmit interrupts are not @@ -6074,14 +6082,6 @@ static void netdev_get_drvinfo(struct net_device *dev, sizeof(info->bus_info)); } -/** - * netdev_get_regs_len - get length of register dump - * @dev: Network device. - * - * This function returns the length of the register dump. - * - * Return length of the register dump. - */ static struct hw_regs { int start; int end; @@ -6095,6 +6095,14 @@ static struct hw_regs { { 0, 0 } }; +/** + * netdev_get_regs_len - get length of register dump + * @dev: Network device. + * + * This function returns the length of the register dump. + * + * Return length of the register dump. + */ static int netdev_get_regs_len(struct net_device *dev) { struct hw_regs *range = hw_regs_range; @@ -6236,6 +6244,8 @@ static int netdev_get_eeprom_len(struct net_device *dev) return EEPROM_SIZE * 2; } +#define EEPROM_MAGIC 0x10A18842 + /** * netdev_get_eeprom - get EEPROM data * @dev: Network device. @@ -6246,8 +6256,6 @@ static int netdev_get_eeprom_len(struct net_device *dev) * * Return 0 if successful; otherwise an error code. */ -#define EEPROM_MAGIC 0x10A18842 - static int netdev_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data) { @@ -6384,7 +6392,7 @@ static int netdev_set_pauseparam(struct net_device *dev, /** * netdev_get_ringparam - get tx/rx ring parameters * @dev: Network device. - * @pause: Ethtool RING settings data structure. + * @ring: Ethtool RING settings data structure. * * This procedure returns the TX/RX ring settings. */ @@ -6688,7 +6696,7 @@ static void mib_monitor(struct timer_list *t) /** * dev_monitor - periodic monitoring - * @ptr: Network device pointer. + * @t: timer list containing a network device pointer. * * This routine is run in a kernel timer to monitor the network device. */ diff --git a/drivers/net/ethernet/microchip/encx24j600-regmap.c b/drivers/net/ethernet/microchip/encx24j600-regmap.c index 5bd7fb917b7a..796e46a53926 100644 --- a/drivers/net/ethernet/microchip/encx24j600-regmap.c +++ b/drivers/net/ethernet/microchip/encx24j600-regmap.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/** +/* * Register map access API - ENCX24J600 support * * Copyright 2015 Gridpoint diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c index 4c1f53339019..72794d158871 100644 --- a/drivers/net/ethernet/natsemi/ns83820.c +++ b/drivers/net/ethernet/natsemi/ns83820.c @@ -600,12 +600,14 @@ static void phy_intr(struct net_device *ndev) struct ns83820 *dev = PRIV(ndev); static const char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" }; u32 cfg, new_cfg; - u32 tbisr, tanar, tanlpar; + u32 tanar, tanlpar; int speed, fullduplex, newlinkstate; cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; if (dev->CFG_cache & CFG_TBI_EN) { + u32 __maybe_unused tbisr; + /* we have an optical transceiver */ tbisr = readl(dev->base + TBISR); tanar = readl(dev->base + TANAR); diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index bc94970bea45..d13d92bf7447 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -1000,7 +1000,7 @@ static void free_shared_mem(struct s2io_nic *nic) } } -/** +/* * s2io_verify_pci_mode - */ @@ -1035,7 +1035,7 @@ static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev) } static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266}; -/** +/* * s2io_print_pci_mode - */ static int s2io_print_pci_mode(struct s2io_nic *nic) @@ -2064,6 +2064,9 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) /** * verify_pcc_quiescent- Checks for PCC quiescent state + * @sp : private member of the device structure, which is a pointer to the + * s2io_nic structure. + * @flag: boolean controlling function path * Return: 1 If PCC is quiescence * 0 If PCC is not quiescence */ @@ -2099,6 +2102,8 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag) } /** * verify_xena_quiescence - Checks whether the H/W is ready + * @sp : private member of the device structure, which is a pointer to the + * s2io_nic structure. * Description: Returns whether the H/W is ready to go or not. Depending * on whether adapter enable bit was written or not the comparison * differs and the calling function passes the input argument flag to @@ -2305,6 +2310,9 @@ static int start_nic(struct s2io_nic *nic) } /** * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb + * @fifo_data: fifo data pointer + * @txdlp: descriptor + * @get_off: unused */ static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, struct TxD *txdlp, int get_off) @@ -2391,7 +2399,7 @@ static void free_tx_buffers(struct s2io_nic *nic) /** * stop_nic - To stop the nic - * @nic ; device private variable. + * @nic : device private variable. * Description: * This function does exactly the opposite of what the start_nic() * function does. This function is called to stop the device. @@ -2419,7 +2427,8 @@ static void stop_nic(struct s2io_nic *nic) /** * fill_rx_buffers - Allocates the Rx side skbs - * @ring_info: per ring structure + * @nic : device private variable. + * @ring: per ring structure * @from_card_up: If this is true, we will map the buffer to get * the dma address for buf0 and buf1 to give it to the card. * Else we will sync the already mapped buffer to give it to the card. @@ -2864,7 +2873,7 @@ static void s2io_netpoll(struct net_device *dev) /** * rx_intr_handler - Rx interrupt handler - * @ring_info: per ring structure. + * @ring_data: per ring structure. * @budget: budget for napi processing. * Description: * If the interrupt is because of a received frame or if the @@ -2972,7 +2981,7 @@ static int rx_intr_handler(struct ring_info *ring_data, int budget) /** * tx_intr_handler - Transmit interrupt handler - * @nic : device private variable + * @fifo_data : fifo data pointer * Description: * If an interrupt was raised to indicate DMA complete of the * Tx packet, this function is called. It identifies the last TxD @@ -3153,6 +3162,8 @@ static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev) /** * s2io_chk_xpak_counter - Function to check the status of the xpak counters * @counter : counter value to be updated + * @regs_stat : registers status + * @index : index * @flag : flag to indicate the status * @type : counter type * Description: @@ -3309,8 +3320,9 @@ static void s2io_updt_xpak_counter(struct net_device *dev) /** * wait_for_cmd_complete - waits for a command to complete. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. + * @addr: address + * @busy_bit: bit to check for busy + * @bit_state: state to check * Description: Function that waits for a command to Write into RMAC * ADDR DATA registers to be completed and returns either success or * error depending on whether the command was complete or not. @@ -4335,7 +4347,7 @@ static int do_s2io_chk_alarm_bit(u64 value, void __iomem *addr, /** * s2io_handle_errors - Xframe error indication handler - * @nic: device private variable + * @dev_id: opaque handle to dev * Description: Handle alarms such as loss of link, single or * double ECC errors, critical and serious errors. * Return Value: @@ -4739,7 +4751,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) return IRQ_HANDLED; } -/** +/* * s2io_updt_stats - */ static void s2io_updt_stats(struct s2io_nic *sp) @@ -5168,7 +5180,7 @@ static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset) return tmp64 >> 16; } -/** +/* * s2io_set_mac_addr - driver entry point */ @@ -5243,8 +5255,7 @@ static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr) /** * s2io_ethtool_set_link_ksettings - Sets different link parameters. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. + * @dev : pointer to netdev * @cmd: pointer to the structure with parameters given by ethtool to set * link information. * Description: @@ -5273,8 +5284,7 @@ s2io_ethtool_set_link_ksettings(struct net_device *dev, /** * s2io_ethtol_get_link_ksettings - Return link specific information. - * @sp : private member of the device structure, pointer to the - * s2io_nic structure. + * @dev: pointer to netdev * @cmd : pointer to the structure with parameters given by ethtool * to return link information. * Description: @@ -5313,8 +5323,7 @@ s2io_ethtool_get_link_ksettings(struct net_device *dev, /** * s2io_ethtool_gdrvinfo - Returns driver specific information. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. + * @dev: pointer to netdev * @info : pointer to the structure with parameters given by ethtool to * return driver information. * Description: @@ -5335,11 +5344,10 @@ static void s2io_ethtool_gdrvinfo(struct net_device *dev, /** * s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer. - * @sp: private member of the device structure, which is a pointer to the - * s2io_nic structure. + * @dev: pointer to netdev * @regs : pointer to the structure with parameters given by ethtool for - * dumping the registers. - * @reg_space: The input argument into which all the registers are dumped. + * dumping the registers. + * @space: The input argument into which all the registers are dumped. * Description: * Dumps the entire register space of xFrame NIC into the user given * buffer area. @@ -5471,8 +5479,7 @@ static void s2io_ethtool_gringparam(struct net_device *dev, /** * s2io_ethtool_getpause_data -Pause frame frame generation and reception. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. + * @dev: pointer to netdev * @ep : pointer to the structure with pause parameters given by ethtool. * Description: * Returns the Pause frame generation and reception capability of the NIC. @@ -5496,8 +5503,7 @@ static void s2io_ethtool_getpause_data(struct net_device *dev, /** * s2io_ethtool_setpause_data - set/reset pause frame generation. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. + * @dev: pointer to netdev * @ep : pointer to the structure with pause parameters given by ethtool. * Description: * It can be used to set or reset Pause frame generation or reception @@ -5526,6 +5532,7 @@ static int s2io_ethtool_setpause_data(struct net_device *dev, return 0; } +#define S2IO_DEV_ID 5 /** * read_eeprom - reads 4 bytes of data from user given offset. * @sp : private member of the device structure, which is a pointer to the @@ -5541,8 +5548,6 @@ static int s2io_ethtool_setpause_data(struct net_device *dev, * Return value: * -1 on failure and 0 on success. */ - -#define S2IO_DEV_ID 5 static int read_eeprom(struct s2io_nic *sp, int off, u64 *data) { int ret = -1; @@ -5734,8 +5739,7 @@ static void s2io_vpd_read(struct s2io_nic *nic) /** * s2io_ethtool_geeprom - reads the value stored in the Eeprom. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. + * @dev: pointer to netdev * @eeprom : pointer to the user level structure provided by ethtool, * containing all relevant information. * @data_buf : user defined value to be written into Eeprom. @@ -5771,11 +5775,10 @@ static int s2io_ethtool_geeprom(struct net_device *dev, /** * s2io_ethtool_seeprom - tries to write the user provided value in Eeprom - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. + * @dev: pointer to netdev * @eeprom : pointer to the user level structure provided by ethtool, * containing all relevant information. - * @data_buf ; user defined value to be written into Eeprom. + * @data_buf : user defined value to be written into Eeprom. * Description: * Tries to write the user provided value in the Eeprom, at the offset * given by the user. @@ -6027,7 +6030,7 @@ static int s2io_bist_test(struct s2io_nic *sp, uint64_t *data) /** * s2io_link_test - verifies the link state of the nic - * @sp ; private member of the device structure, which is a pointer to the + * @sp: private member of the device structure, which is a pointer to the * s2io_nic structure. * @data: variable that returns the result of each of the test conducted by * the driver. @@ -6150,8 +6153,7 @@ static int s2io_rldram_test(struct s2io_nic *sp, uint64_t *data) /** * s2io_ethtool_test - conducts 6 tsets to determine the health of card. - * @sp : private member of the device structure, which is a pointer to the - * s2io_nic structure. + * @dev: pointer to netdev * @ethtest : pointer to a ethtool command specific structure that will be * returned to the user. * @data : variable that returns the result of each of the test @@ -6597,7 +6599,7 @@ static const struct ethtool_ops netdev_ethtool_ops = { /** * s2io_ioctl - Entry point for the Ioctl * @dev : Device pointer. - * @ifr : An IOCTL specefic structure, that can contain a pointer to + * @rq : An IOCTL specefic structure, that can contain a pointer to * a proprietary structure used to pass information to the driver. * @cmd : This is used to distinguish between the different commands that * can be passed to the IOCTL functions. @@ -6650,7 +6652,7 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) /** * s2io_set_link - Set the LInk status - * @data: long pointer to device private structue + * @work: work struct containing a pointer to device private structue * Description: Sets the link status for the adapter */ @@ -7187,7 +7189,7 @@ static int s2io_card_up(struct s2io_nic *sp) /** * s2io_restart_nic - Resets the NIC. - * @data : long pointer to the device private structure + * @work : work struct containing a pointer to the device private structure * Description: * This function is scheduled to be run by the s2io_tx_watchdog * function after 0.5 secs to reset the NIC. The idea is to reduce @@ -7218,6 +7220,7 @@ out_unlock: /** * s2io_tx_watchdog - Watchdog for transmit side. * @dev : Pointer to net device structure + * @txqueue: index of the hanging queue * Description: * This function is triggered if the Tx Queue is stopped * for a pre-defined amount of time when the Interface is still up. @@ -7242,11 +7245,8 @@ static void s2io_tx_watchdog(struct net_device *dev, unsigned int txqueue) /** * rx_osm_handler - To perform some OS related operations on SKB. - * @sp: private member of the device structure,pointer to s2io_nic structure. - * @skb : the socket buffer pointer. - * @len : length of the packet - * @cksum : FCS checksum of the frame. - * @ring_no : the ring from which this RxD was extracted. + * @ring_data : the ring from which this RxD was extracted. + * @rxdp: descriptor * Description: * This function is called by the Rx interrupt serivce routine to perform * some OS related operations on the SKB before passing it to the upper @@ -7576,9 +7576,10 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, } /** - * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS - * or Traffic class respectively. + * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS or Traffic class respectively. * @nic: device private variable + * @ds_codepoint: data + * @ring: ring index * Description: The function configures the receive steering to * desired receive ring. * Return Value: SUCCESS on success and diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.c b/drivers/net/ethernet/neterion/vxge/vxge-config.c index 78eba10300ae..6aba267036dd 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-config.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-config.c @@ -988,6 +988,9 @@ exit: /** * vxge_hw_device_hw_info_get - Get the hw information + * @bar0: the bar + * @hw_info: the hw_info struct + * * Returns the vpath mask that has the bits set for each vpath allocated * for the driver, FW version information, and the first mac address for * each vpath @@ -3926,7 +3929,7 @@ exit: /** * vxge_hw_vpath_check_leak - Check for memory leak - * @ringh: Handle to the ring object used for receive + * @ring: Handle to the ring object used for receive * * If PRC_RXD_DOORBELL_VPn.NEW_QW_CNT is larger or equal to * PRC_CFG6_VPn.RXD_SPAT then a leak has occurred. diff --git a/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c index 03c3d1230c17..4d91026485ae 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c @@ -119,7 +119,7 @@ static void vxge_ethtool_gdrvinfo(struct net_device *dev, * @dev: device pointer. * @regs: pointer to the structure with parameters given by ethtool for * dumping the registers. - * @reg_space: The input argument into which all the registers are dumped. + * @space: The input argument into which all the registers are dumped. * * Dumps the vpath register space of Titan NIC into the user given * buffer area. diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index 7afdb3bc631c..87892bd992b1 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -1275,6 +1275,7 @@ _set_all_mcast: /** * vxge_set_mac_addr * @dev: pointer to the device structure + * @p: socket info * * Update entry "0" (default MAC addr) */ @@ -1799,7 +1800,7 @@ static void vxge_reset(struct work_struct *work) /** * vxge_poll - Receive handler when Receive Polling is used. - * @dev: pointer to the device structure. + * @napi: pointer to the napi structure. * @budget: Number of packets budgeted to be processed in this iteration. * * This function comes into picture only if Receive side is being handled @@ -3096,7 +3097,7 @@ static int vxge_change_mtu(struct net_device *dev, int new_mtu) /** * vxge_get_stats64 * @dev: pointer to the device structure - * @stats: pointer to struct rtnl_link_stats64 + * @net_stats: pointer to struct rtnl_link_stats64 * */ static void @@ -3245,7 +3246,7 @@ static int vxge_hwtstamp_get(struct vxgedev *vdev, void __user *data) /** * vxge_ioctl * @dev: Device pointer. - * @ifr: An IOCTL specific structure, that can contain a pointer to + * @rq: An IOCTL specific structure, that can contain a pointer to * a proprietary structure used to pass information to the driver. * @cmd: This is used to distinguish between the different commands that * can be passed to the IOCTL functions. @@ -3269,6 +3270,7 @@ static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) /** * vxge_tx_watchdog * @dev: pointer to net device structure + * @txqueue: index of the hanging queue * * Watchdog for transmit side. * This function is triggered if the Tx Queue is stopped @@ -4002,6 +4004,7 @@ static void vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask) /** * vxge_pm_suspend - vxge power management suspend entry point + * @dev_d: device pointer * */ static int __maybe_unused vxge_pm_suspend(struct device *dev_d) @@ -4010,6 +4013,7 @@ static int __maybe_unused vxge_pm_suspend(struct device *dev_d) } /** * vxge_pm_resume - vxge power management resume entry point + * @dev_d: device pointer * */ static int __maybe_unused vxge_pm_resume(struct device *dev_d) diff --git a/drivers/net/ethernet/neterion/vxge/vxge-traffic.c b/drivers/net/ethernet/neterion/vxge/vxge-traffic.c index bd525e8eda10..ee164970b267 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-traffic.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-traffic.c @@ -278,7 +278,7 @@ void vxge_hw_vpath_dynamic_rti_rtimer_set(struct __vxge_hw_ring *ring) /** * vxge_hw_channel_msix_mask - Mask MSIX Vector. - * @channeh: Channel for rx or tx handle + * @channel: Channel for rx or tx handle * @msix_id: MSIX ID * * The function masks the msix interrupt for the given msix_id @@ -295,7 +295,7 @@ void vxge_hw_channel_msix_mask(struct __vxge_hw_channel *channel, int msix_id) /** * vxge_hw_channel_msix_unmask - Unmask the MSIX Vector. - * @channeh: Channel for rx or tx handle + * @channel: Channel for rx or tx handle * @msix_id: MSI ID * * The function unmasks the msix interrupt for the given msix_id @@ -350,8 +350,6 @@ u32 vxge_hw_device_set_intr_type(struct __vxge_hw_device *hldev, u32 intr_mode) /** * vxge_hw_device_intr_enable - Enable interrupts. * @hldev: HW device handle. - * @op: One of the enum vxge_hw_device_intr enumerated values specifying - * the type(s) of interrupts to enable. * * Enable Titan interrupts. The function is to be executed the last in * Titan initialization sequence. @@ -405,8 +403,6 @@ void vxge_hw_device_intr_enable(struct __vxge_hw_device *hldev) /** * vxge_hw_device_intr_disable - Disable Titan interrupts. * @hldev: HW device handle. - * @op: One of the enum vxge_hw_device_intr enumerated values specifying - * the type(s) of interrupts to disable. * * Disable Titan interrupts. * @@ -1406,7 +1402,7 @@ u32 vxge_hw_fifo_free_txdl_count_get(struct __vxge_hw_fifo *fifoh) /** * vxge_hw_fifo_txdl_reserve - Reserve fifo descriptor. - * @fifoh: Handle to the fifo object used for non offload send + * @fifo: Handle to the fifo object used for non offload send * @txdlh: Reserved descriptor. On success HW fills this "out" parameter * with a valid handle. * @txdl_priv: Buffer to return the pointer to per txdl space @@ -1517,8 +1513,6 @@ void vxge_hw_fifo_txdl_buffer_set(struct __vxge_hw_fifo *fifo, * vxge_hw_fifo_txdl_post - Post descriptor on the fifo channel. * @fifo: Handle to the fifo object used for non offload send * @txdlh: Descriptor obtained via vxge_hw_fifo_txdl_reserve() - * @frags: Number of contiguous buffers that are part of a single - * transmit operation. * * Post descriptor on the 'fifo' type channel for transmission. * Prior to posting the descriptor should be filled in accordance with @@ -1691,8 +1685,7 @@ void vxge_hw_fifo_txdl_free(struct __vxge_hw_fifo *fifo, void *txdlh) } /** - * vxge_hw_vpath_mac_addr_add - Add the mac address entry for this vpath - * to MAC address table. + * vxge_hw_vpath_mac_addr_add - Add the mac address entry for this vpath to MAC address table. * @vp: Vpath handle. * @macaddr: MAC address to be added for this vpath into the list * @macaddr_mask: MAC address mask for macaddr @@ -1757,13 +1750,13 @@ exit: } /** - * vxge_hw_vpath_mac_addr_get - Get the first mac address entry for this vpath - * from MAC address table. + * vxge_hw_vpath_mac_addr_get - Get the first mac address entry * @vp: Vpath handle. * @macaddr: First MAC address entry for this vpath in the list * @macaddr_mask: MAC address mask for macaddr * - * Returns the first mac address and mac address mask in the list for this + * Get the first mac address entry for this vpath from MAC address table. + * Return: the first mac address and mac address mask in the list for this * vpath. * see also: vxge_hw_vpath_mac_addr_get_next * @@ -1808,14 +1801,13 @@ exit: } /** - * vxge_hw_vpath_mac_addr_get_next - Get the next mac address entry for this - * vpath - * from MAC address table. + * vxge_hw_vpath_mac_addr_get_next - Get the next mac address entry * @vp: Vpath handle. * @macaddr: Next MAC address entry for this vpath in the list * @macaddr_mask: MAC address mask for macaddr * - * Returns the next mac address and mac address mask in the list for this + * Get the next mac address entry for this vpath from MAC address table. + * Return: the next mac address and mac address mask in the list for this * vpath. * see also: vxge_hw_vpath_mac_addr_get * @@ -1861,8 +1853,7 @@ exit: } /** - * vxge_hw_vpath_mac_addr_delete - Delete the mac address entry for this vpath - * to MAC address table. + * vxge_hw_vpath_mac_addr_delete - Delete the mac address entry for this vpath to MAC address table. * @vp: Vpath handle. * @macaddr: MAC address to be added for this vpath into the list * @macaddr_mask: MAC address mask for macaddr @@ -1908,8 +1899,7 @@ exit: } /** - * vxge_hw_vpath_vid_add - Add the vlan id entry for this vpath - * to vlan id table. + * vxge_hw_vpath_vid_add - Add the vlan id entry for this vpath to vlan id table. * @vp: Vpath handle. * @vid: vlan id to be added for this vpath into the list * @@ -2403,9 +2393,11 @@ enum vxge_hw_status vxge_hw_vpath_poll_rx(struct __vxge_hw_ring *ring) } /** - * vxge_hw_vpath_poll_tx - Poll Tx for completed descriptors and process - * the same. + * vxge_hw_vpath_poll_tx - Poll Tx for completed descriptors and process the same. * @fifo: Handle to the fifo object used for non offload send + * @skb_ptr: pointer to skb + * @nr_skb: number of skbs + * @more: more is coming * * The function polls the Tx for the completed descriptors and calls * the driver via supplied completion callback. diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c index b36aa5bf3c5f..a58f14aca10c 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c @@ -8,7 +8,7 @@ #include "pch_gbe.h" #include "pch_gbe_phy.h" -/** +/* * pch_gbe_stats - Stats item information */ struct pch_gbe_stats { @@ -24,7 +24,7 @@ struct pch_gbe_stats { .offset = offsetof(struct pch_gbe_hw_stats, m), \ } -/** +/* * pch_gbe_gstrings_stats - ethtool information status name list */ static const struct pch_gbe_stats pch_gbe_gstrings_stats[] = { diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 23f7c76737c9..ade8c44c01cd 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -295,7 +295,7 @@ static s32 pch_gbe_mac_read_mac_addr(struct pch_gbe_hw *hw) /** * pch_gbe_wait_clr_bit - Wait to clear a bit * @reg: Pointer of register - * @busy: Busy bit + * @bit: Busy bit */ static void pch_gbe_wait_clr_bit(void *reg, u32 bit) { @@ -1034,7 +1034,7 @@ static void pch_gbe_set_mode(struct pch_gbe_adapter *adapter, u16 speed, /** * pch_gbe_watchdog - Watchdog process - * @data: Board private structure + * @t: timer list containing a Board private structure */ static void pch_gbe_watchdog(struct timer_list *t) { @@ -2270,6 +2270,7 @@ static int pch_gbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) /** * pch_gbe_tx_timeout - Respond to a Tx Hang * @netdev: Network interface device structure + * @txqueue: index of hanging queue */ static void pch_gbe_tx_timeout(struct net_device *netdev, unsigned int txqueue) { diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c index dceec80fd642..81fc5a6e3221 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c @@ -13,7 +13,7 @@ #define OPTION_DISABLED 0 #define OPTION_ENABLED 1 -/** +/* * TxDescriptors - Transmit Descriptor Count * @Valid Range: PCH_GBE_MIN_TXD - PCH_GBE_MAX_TXD * @Default Value: PCH_GBE_DEFAULT_TXD @@ -22,7 +22,7 @@ static int TxDescriptors = OPTION_UNSET; module_param(TxDescriptors, int, 0); MODULE_PARM_DESC(TxDescriptors, "Number of transmit descriptors"); -/** +/* * RxDescriptors -Receive Descriptor Count * @Valid Range: PCH_GBE_MIN_RXD - PCH_GBE_MAX_RXD * @Default Value: PCH_GBE_DEFAULT_RXD @@ -31,7 +31,7 @@ static int RxDescriptors = OPTION_UNSET; module_param(RxDescriptors, int, 0); MODULE_PARM_DESC(RxDescriptors, "Number of receive descriptors"); -/** +/* * Speed - User Specified Speed Override * @Valid Range: 0, 10, 100, 1000 * - 0: auto-negotiate at all supported speeds @@ -44,7 +44,7 @@ static int Speed = OPTION_UNSET; module_param(Speed, int, 0); MODULE_PARM_DESC(Speed, "Speed setting"); -/** +/* * Duplex - User Specified Duplex Override * @Valid Range: 0-2 * - 0: auto-negotiate for duplex @@ -59,7 +59,7 @@ MODULE_PARM_DESC(Duplex, "Duplex setting"); #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 -/** +/* * AutoNeg - Auto-negotiation Advertisement Override * @Valid Range: 0x01-0x0F, 0x20-0x2F * @@ -85,7 +85,7 @@ MODULE_PARM_DESC(AutoNeg, "Advertised auto-negotiation setting"); #define PHY_ADVERTISE_1000_FULL 0x0020 #define PCH_AUTONEG_ADVERTISE_DEFAULT 0x2F -/** +/* * FlowControl - User Specified Flow Control Override * @Valid Range: 0-3 * - 0: No Flow Control @@ -124,7 +124,7 @@ MODULE_PARM_DESC(XsumTX, "Disable or enable Transmit Checksum offload"); #define PCH_GBE_DEFAULT_TX_CSUM true /* trueorfalse */ -/** +/* * pch_gbe_option - Force the MAC's flow control settings * @hw: Pointer to the HW structure * Returns: diff --git a/drivers/net/ethernet/packetengines/yellowfin.c b/drivers/net/ethernet/packetengines/yellowfin.c index 3da075307178..d1dd9bc1bc7f 100644 --- a/drivers/net/ethernet/packetengines/yellowfin.c +++ b/drivers/net/ethernet/packetengines/yellowfin.c @@ -1060,7 +1060,7 @@ static int yellowfin_rx(struct net_device *dev) struct sk_buff *rx_skb = yp->rx_skbuff[entry]; s16 frame_status; u16 desc_status; - int data_size, yf_size; + int data_size, __maybe_unused yf_size; u8 *buf_addr; if(!desc->result_status) diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h index 86153660d245..e5c51256243a 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic.h +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h @@ -1189,9 +1189,6 @@ typedef struct { #define NX_FORCE_FW_RESET 0xdeaddead -/* Fw dump levels */ -static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; - /* Flash read/write address */ #define NX_FW_DUMP_REG1 0x00130060 #define NX_FW_DUMP_REG2 0x001e0000 diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c index c3f50ddbe824..dd22cb056d03 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c @@ -814,6 +814,9 @@ netxen_get_dump_flag(struct net_device *netdev, struct ethtool_dump *dump) return 0; } +/* Fw dump levels */ +static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; + static int netxen_set_dump(struct net_device *netdev, struct ethtool_dump *val) { diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 1166b98d8bb2..8543bf3c3484 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -292,6 +292,7 @@ static void emac_tx_timeout(struct net_device *netdev, unsigned int txqueue) /** * emac_update_hw_stats - read the EMAC stat registers + * @adpt: pointer to adapter struct * * Reads the stats registers and write the values to adpt->stats. * diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index 2cc8184b7e6b..971f1e54b652 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -97,7 +97,7 @@ void sxgbe_disable_eee_mode(struct sxgbe_priv_data * const priv) /** * sxgbe_eee_ctrl_timer - * @arg : data hook + * @t: timer list containing a data * Description: * If there is no data transfer and if we are not in LPI state, * then MAC Transmitter can be moved to LPI state. @@ -255,7 +255,7 @@ static void sxgbe_adjust_link(struct net_device *dev) /** * sxgbe_init_phy - PHY initialization - * @dev: net device structure + * @ndev: net device structure * Description: it initializes the driver's PHY state, and attaches the PHY * to the mac driver. * Return value: @@ -364,8 +364,11 @@ static int sxgbe_init_rx_buffers(struct net_device *dev, /** * sxgbe_free_rx_buffers - free what sxgbe_init_rx_buffers() allocated * @dev: net device structure + * @p: dec pointer + * @i: index + * @dma_buf_sz: size * @rx_ring: ring to be freed - * @rx_rsize: ring size + * * Description: this function initializes the DMA RX descriptor */ static void sxgbe_free_rx_buffers(struct net_device *dev, @@ -383,6 +386,7 @@ static void sxgbe_free_rx_buffers(struct net_device *dev, /** * init_tx_ring - init the TX descriptor ring * @dev: net device structure + * @queue_no: queue * @tx_ring: ring to be initialised * @tx_rsize: ring size * Description: this function initializes the DMA TX descriptor @@ -449,6 +453,7 @@ static void free_rx_ring(struct device *dev, struct sxgbe_rx_queue *rx_ring, /** * init_rx_ring - init the RX descriptor ring * @dev: net device structure + * @queue_no: queue * @rx_ring: ring to be initialised * @rx_rsize: ring size * Description: this function initializes the DMA RX descriptor @@ -548,7 +553,7 @@ static void free_tx_ring(struct device *dev, struct sxgbe_tx_queue *tx_ring, /** * init_dma_desc_rings - init the RX/TX descriptor rings - * @dev: net device structure + * @netd: net device structure * Description: this function initializes the DMA RX/TX descriptors * and allocates the socket buffers. It suppors the chained and ring * modes. @@ -724,7 +729,7 @@ static void sxgbe_mtl_operation_mode(struct sxgbe_priv_data *priv) /** * sxgbe_tx_queue_clean: - * @priv: driver private structure + * @tqueue: queue pointer * Description: it reclaims resources after transmission completes. */ static void sxgbe_tx_queue_clean(struct sxgbe_tx_queue *tqueue) @@ -807,6 +812,7 @@ static void sxgbe_tx_all_clean(struct sxgbe_priv_data * const priv) /** * sxgbe_restart_tx_queue: irq tx error mng function * @priv: driver private structure + * @queue_num: queue number * Description: it cleans the descriptors and restarts the transmission * in case of errors. */ @@ -1567,6 +1573,7 @@ static int sxgbe_poll(struct napi_struct *napi, int budget) /** * sxgbe_tx_timeout * @dev : Pointer to net device structure + * @txqueue: index of the hanging queue * Description: this function is called when a packet transmission fails to * complete within a reasonable time. The driver will mark the error in the * netdev structure and arrange for the device to be reset to a sane state diff --git a/drivers/net/ethernet/sfc/falcon/rx.c b/drivers/net/ethernet/sfc/falcon/rx.c index 05ea3523890a..966f13e7475d 100644 --- a/drivers/net/ethernet/sfc/falcon/rx.c +++ b/drivers/net/ethernet/sfc/falcon/rx.c @@ -140,6 +140,7 @@ static struct page *ef4_reuse_page(struct ef4_rx_queue *rx_queue) * ef4_init_rx_buffers - create EF4_RX_BATCH page-based RX buffers * * @rx_queue: Efx RX queue + * @atomic: control memory allocation flags * * This allocates a batch of pages, maps them for DMA, and populates * struct ef4_rx_buffers for each one. Return a negative error code or @@ -316,6 +317,7 @@ static void ef4_discard_rx_packet(struct ef4_channel *channel, * This will aim to fill the RX descriptor queue up to * @rx_queue->@max_fill. If there is insufficient atomic * memory to do so, a slow fill will be scheduled. + * @atomic: control memory allocation flags * * The caller must provide serialisation (none is used here). In practise, * this means this function must run from the NAPI handler, or be called diff --git a/drivers/net/ethernet/sfc/falcon/selftest.c b/drivers/net/ethernet/sfc/falcon/selftest.c index 147677c7c72f..6a454ac6f876 100644 --- a/drivers/net/ethernet/sfc/falcon/selftest.c +++ b/drivers/net/ethernet/sfc/falcon/selftest.c @@ -65,7 +65,7 @@ static const char *const ef4_interrupt_mode_names[] = { STRING_TABLE_LOOKUP(efx->interrupt_mode, ef4_interrupt_mode) /** - * ef4_loopback_state - persistent state during a loopback selftest + * struct ef4_loopback_state - persistent state during a loopback selftest * @flush: Drop all packets in ef4_loopback_rx_packet * @packet_count: Number of packets being used in this test * @skbs: An array of skbs transmitted diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h index a4c0445a3e88..47aa753e64bd 100644 --- a/drivers/net/ethernet/sfc/net_driver.h +++ b/drivers/net/ethernet/sfc/net_driver.h @@ -458,7 +458,7 @@ enum efx_sync_events_state { * were checked for expiry * @rfs_expire_index: next accelerated RFS filter ID to check for expiry * @n_rfs_succeeded: number of successful accelerated RFS filter insertions - * @n_rfs_failed; number of failed accelerated RFS filter insertions + * @n_rfs_failed: number of failed accelerated RFS filter insertions * @filter_work: Work item for efx_filter_rfs_expire() * @rps_flow_id: Flow IDs of filters allocated for accelerated RFS, * indexed by filter ID diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c index aae208fe6b6e..a39c5143b386 100644 --- a/drivers/net/ethernet/sfc/ptp.c +++ b/drivers/net/ethernet/sfc/ptp.c @@ -173,9 +173,11 @@ struct efx_ptp_match { /** * struct efx_ptp_event_rx - A PTP receive event (from MC) + * @link: list of events * @seq0: First part of (PTP) UUID * @seq1: Second part of (PTP) UUID and sequence number * @hwtimestamp: Event timestamp + * @expiry: Time which the packet arrived */ struct efx_ptp_event_rx { struct list_head link; @@ -223,11 +225,13 @@ struct efx_ptp_timeset { * reset (disable, enable). * @rxfilter_event: Receive filter when operating * @rxfilter_general: Receive filter when operating + * @rxfilter_installed: Receive filter installed * @config: Current timestamp configuration * @enabled: PTP operation enabled * @mode: Mode in which PTP operating (PTP version) * @ns_to_nic_time: Function to convert from scalar nanoseconds to NIC time * @nic_to_kernel_time: Function to convert from NIC to kernel time + * @nic_time: contains time details * @nic_time.minor_max: Wrap point for NIC minor times * @nic_time.sync_event_diff_min: Minimum acceptable difference between time * in packet prefix and last MCDI time sync event i.e. how much earlier than @@ -239,6 +243,7 @@ struct efx_ptp_timeset { * field in MCDI time sync event. * @min_synchronisation_ns: Minimum acceptable corrected sync window * @capabilities: Capabilities flags from the NIC + * @ts_corrections: contains corrections details * @ts_corrections.ptp_tx: Required driver correction of PTP packet transmit * timestamps * @ts_corrections.ptp_rx: Required driver correction of PTP packet receive diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index 869b7618e2ba..620c26f71be8 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -1301,7 +1301,7 @@ static void sis630_set_eq(struct net_device *net_dev, u8 revision) /** * sis900_timer - sis900 timer routine - * @data: pointer to sis900 net device + * @t: timer list containing a pointer to sis900 net device * * On each timer ticks we check two things, * link status (ON/OFF) and link mode (10/100/Full/Half) @@ -1535,6 +1535,7 @@ static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex /** * sis900_tx_timeout - sis900 transmit timeout routine * @net_dev: the net device to transmit + * @txqueue: index of hanging queue * * print transmit timeout status * disable interrupts and do some tasks diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 2d5573b3dee1..6ef30252bfe0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /** - * dwmac-rk.c - Rockchip RK3288 DWMAC specific glue layer + * DOC: dwmac-rk.c - Rockchip RK3288 DWMAC specific glue layer * * Copyright (C) 2014 Chen-Zhi (Roger Chen) * diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index df2c74bbfcff..5e13e6f18dad 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -334,7 +334,7 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv) /** * stmmac_eee_ctrl_timer - EEE TX SW timer. - * @arg : data hook + * @t: timer_list struct containing private info * Description: * if there is no data transfer and if we are not in LPI state, * then MAC Transmitter can be moved to LPI state. @@ -709,7 +709,7 @@ static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr) * a proprietary structure used to pass information to the driver. * Description: * This function obtain the current hardware timestamping settings - as requested. + * as requested. */ static int stmmac_hwtstamp_get(struct net_device *dev, struct ifreq *ifr) { @@ -769,6 +769,7 @@ static void stmmac_release_ptp(struct stmmac_priv *priv) /** * stmmac_mac_flow_ctrl - Configure flow control in all queues * @priv: driver private structure + * @duplex: duplex passed to the next function * Description: It is used for configuring the flow control in all queues */ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex) @@ -1942,6 +1943,7 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) /** * stmmac_tx_clean - to manage the transmission completion * @priv: driver private structure + * @budget: napi budget limiting this functions packet handling * @queue: TX queue index * Description: it reclaims the transmit resources after transmission completes. */ @@ -2335,7 +2337,7 @@ static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue) /** * stmmac_tx_timer - mitigation sw timer for tx. - * @data: data pointer + * @t: data pointer * Description: * This is the timer handler to directly invoke the stmmac_tx_clean. */ @@ -2598,6 +2600,7 @@ static void stmmac_safety_feat_configuration(struct stmmac_priv *priv) /** * stmmac_hw_setup - setup mac in a usable state. * @dev : pointer to the device structure. + * @init_ptp: initialize PTP if set * Description: * this is the main function to setup the HW in a usable state because the * dma engine is reset, the core registers are configured (e.g. AXI, @@ -2958,7 +2961,7 @@ static bool stmmac_vlan_insert(struct stmmac_priv *priv, struct sk_buff *skb, * @priv: driver private structure * @des: buffer start address * @total_len: total length to fill in descriptors - * @last_segmant: condition for the last descriptor + * @last_segment: condition for the last descriptor * @queue: TX queue index * Description: * This function fills descriptor and request new descriptors according to @@ -3927,6 +3930,7 @@ static int stmmac_napi_poll_tx(struct napi_struct *napi, int budget) /** * stmmac_tx_timeout * @dev : Pointer to net device structure + * @txqueue: the index of the hanging transmit queue * Description: this function is called when a packet transmission fails to * complete within a reasonable time. The driver will mark the error in the * netdev structure and arrange for the device to be reset to a sane state @@ -5162,7 +5166,7 @@ EXPORT_SYMBOL_GPL(stmmac_suspend); /** * stmmac_reset_queues_param - reset queue parameters - * @dev: device pointer + * @priv: device pointer */ static void stmmac_reset_queues_param(struct stmmac_priv *priv) { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index f32317fa75c8..af34a4cadbb0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -125,6 +125,7 @@ static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev) /** * stmmac_mtl_setup - parse DT parameters for multiple queues configuration * @pdev: platform device + * @plat: enet data */ static int stmmac_mtl_setup(struct platform_device *pdev, struct plat_stmmacenet_data *plat) @@ -360,7 +361,7 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, /** * stmmac_of_get_mac_mode - retrieves the interface of the MAC - * @np - device-tree node + * @np: - device-tree node * Description: * Similar to `of_get_phy_mode()`, this function will retrieve (from * the device-tree) the interface mode on the MAC side. This assumes diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c index b624e177ec71..9ff894ba8d3e 100644 --- a/drivers/net/ethernet/sun/cassini.c +++ b/drivers/net/ethernet/sun/cassini.c @@ -454,8 +454,8 @@ static int cas_page_free(struct cas *cp, cas_page_t *page) #define RX_USED_ADD(x, y) ((x)->used += (y)) #define RX_USED_SET(x, y) ((x)->used = (y)) #else -#define RX_USED_ADD(x, y) -#define RX_USED_SET(x, y) +#define RX_USED_ADD(x, y) do { } while(0) +#define RX_USED_SET(x, y) do { } while(0) #endif /* local page allocation routines for the receive buffers. jumbo pages diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index a142e4c9fc03..b8f4f419173f 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -138,7 +138,10 @@ static void print_eth_id(struct net_device *ndev) * @priv: NIC private structure * @f: fifo to initialize * @fsz_type: fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB - * @reg_XXX: offsets of registers relative to base address + * @reg_CFG0: offsets of registers relative to base address + * @reg_CFG1: offsets of registers relative to base address + * @reg_RPTR: offsets of registers relative to base address + * @reg_WPTR: offsets of registers relative to base address * * 1K extra space is allocated at the end of the fifo to simplify * processing of descriptors that wraps around fifo's end @@ -558,7 +561,7 @@ static int bdx_reset(struct bdx_priv *priv) /** * bdx_close - Disables a network interface - * @netdev: network interface device structure + * @ndev: network interface device structure * * Returns 0, this is not allowed to fail * @@ -585,7 +588,7 @@ static int bdx_close(struct net_device *ndev) /** * bdx_open - Called when a network interface is made active - * @netdev: network interface device structure + * @ndev: network interface device structure * * Returns 0 on success, negative value on failure * @@ -698,7 +701,7 @@ static int bdx_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) * __bdx_vlan_rx_vid - private helper for adding/killing VLAN vid * @ndev: network device * @vid: VLAN vid - * @op: add or kill operation + * @enable: enable or disable vlan * * Passes VLAN filter table to hardware */ @@ -729,6 +732,7 @@ static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable) /** * bdx_vlan_rx_add_vid - kernel hook for adding VLAN vid to hw filtering table * @ndev: network device + * @proto: unused * @vid: VLAN vid to add */ static int bdx_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid) @@ -740,6 +744,7 @@ static int bdx_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid) /** * bdx_vlan_rx_kill_vid - kernel hook for killing VLAN vid in hw filtering table * @ndev: network device + * @proto: unused * @vid: VLAN vid to kill */ static int bdx_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid) @@ -750,7 +755,7 @@ static int bdx_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid) /** * bdx_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure + * @ndev: network interface device structure * @new_mtu: new value for maximum frame size * * Returns 0 on success, negative on failure @@ -1753,6 +1758,8 @@ static void bdx_tx_cleanup(struct bdx_priv *priv) /** * bdx_tx_free_skbs - frees all skbs from TXD fifo. + * @priv: NIC private structure + * * It gets called when OS stops this dev, eg upon "ifconfig down" or rmmod */ static void bdx_tx_free_skbs(struct bdx_priv *priv) diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 6614fa3089b2..d2eab5cd1e0c 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -718,7 +718,7 @@ static void cpdma_chan_set_descs(struct cpdma_ctlr *ctlr, most_chan->desc_num += desc_cnt; } -/** +/* * cpdma_chan_split_pool - Splits ctrl pool between all channels. * Has to be called under ctlr lock */ diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index b36d0e412d23..c7031e1960d4 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -671,7 +671,7 @@ static int emac_hash_del(struct emac_priv *priv, u8 *mac_addr) * emac_add_mcast - Set multicast address in the EMAC adapter (Internal) * @priv: The DaVinci EMAC private adapter structure * @action: multicast operation to perform - * mac_addr: mac address to set + * @mac_addr: mac address to set * * Set multicast addresses in EMAC adapter - internal function * @@ -977,6 +977,7 @@ fail_tx: /** * emac_dev_tx_timeout - EMAC Transmit timeout function * @ndev: The DaVinci EMAC network adapter + * @txqueue: the index of the hung transmit queue * * Called when system detects that a skb timeout period has expired * potentially due to a fault in the adapter in not being able to send @@ -1209,7 +1210,7 @@ static int emac_hw_enable(struct emac_priv *priv) /** * emac_poll - EMAC NAPI Poll function - * @ndev: The DaVinci EMAC network adapter + * @napi: pointer to the napi_struct containing The DaVinci EMAC network adapter * @budget: Number of receive packets to process (as told by NAPI layer) * * NAPI Poll function implemented to process packets as per budget. We check diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index 803247d51fe9..26e6b087c0e4 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -1515,7 +1515,7 @@ static void rhine_init_cam_filter(struct net_device *dev) /** * rhine_update_vcam - update VLAN CAM filters - * @rp: rhine_private data of this Rhine + * @dev: rhine_private data of this Rhine * * Update VLAN CAM filters to match configuration change. */ diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index 722b44604ea8..b65767f9e499 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -372,7 +372,7 @@ static const struct pci_device_id velocity_pci_id_table[] = { MODULE_DEVICE_TABLE(pci, velocity_pci_id_table); -/** +/* * Describe the OF device identifiers that we support in this * device driver. Used for devicetree nodes. */ @@ -384,7 +384,7 @@ MODULE_DEVICE_TABLE(of, velocity_of_ids); /** * get_chip_name - identifier to name - * @id: chip identifier + * @chip_id: chip identifier * * Given a chip identifier return a suitable description. Returns * a pointer a static string valid while the driver is loaded. @@ -748,7 +748,7 @@ static u32 mii_check_media_mode(struct mac_regs __iomem *regs) /** * velocity_mii_write - write MII data * @regs: velocity registers - * @index: MII register index + * @mii_addr: MII register index * @data: 16bit data for the MII register * * Perform a single write to an MII 16bit register. Returns zero @@ -869,6 +869,7 @@ static u32 check_connection_type(struct mac_regs __iomem *regs) /** * velocity_set_media_mode - set media mode + * @vptr: velocity adapter * @mii_status: old MII link state * * Check the media link state and configure the flow control @@ -1256,6 +1257,7 @@ static void mii_init(struct velocity_info *vptr, u32 mii_status) /** * setup_queue_timers - Setup interrupt timers + * @vptr: velocity adapter * * Setup interrupt frequency during suppression (timeout if the frame * count isn't filled). @@ -1280,8 +1282,7 @@ static void setup_queue_timers(struct velocity_info *vptr) /** * setup_adaptive_interrupts - Setup interrupt suppression - * - * @vptr velocity adapter + * @vptr: velocity adapter * * The velocity is able to suppress interrupt during high interrupt load. * This function turns on that feature. @@ -1722,6 +1723,7 @@ err_free_dma_rings_0: * velocity_free_tx_buf - free transmit buffer * @vptr: velocity * @tdinfo: buffer + * @td: transmit descriptor to free * * Release an transmit buffer. If the buffer was preallocated then * recycle it, if not then unmap the buffer. @@ -1896,7 +1898,7 @@ static void velocity_error(struct velocity_info *vptr, int status) /** * tx_srv - transmit interrupt service - * @vptr; Velocity + * @vptr: Velocity * * Scan the queues looking for transmitted packets that * we can complete and clean up. Update any statistics as @@ -1990,8 +1992,7 @@ static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb) * velocity_rx_copy - in place Rx copy for small packets * @rx_skb: network layer packet buffer candidate * @pkt_size: received data size - * @rd: receive packet descriptor - * @dev: network device + * @vptr: velocity adapter * * Replace the current skb that is scheduled for Rx processing by a * shorter, immediately allocated skb, if the received packet is small @@ -2097,6 +2098,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx) /** * velocity_rx_srv - service RX interrupt * @vptr: velocity + * @budget_left: remaining budget * * Walk the receive ring of the velocity adapter and remove * any received packets from the receive queue. Hand the ring @@ -2645,7 +2647,6 @@ static const struct net_device_ops velocity_netdev_ops = { /** * velocity_init_info - init private data - * @pdev: PCI device * @vptr: Velocity info * @info: Board type * @@ -2664,7 +2665,6 @@ static void velocity_init_info(struct velocity_info *vptr, /** * velocity_get_pci_info - retrieve PCI info for device * @vptr: velocity device - * @pdev: PCI device it matches * * Retrieve the PCI configuration space data that interests us from * the kernel PCI layer @@ -2701,7 +2701,6 @@ static int velocity_get_pci_info(struct velocity_info *vptr) /** * velocity_get_platform_info - retrieve platform info for device * @vptr: velocity device - * @pdev: platform device it matches * * Retrieve the Platform configuration data that interests us */ @@ -2751,8 +2750,9 @@ static u32 velocity_get_link(struct net_device *dev) /** * velocity_probe - set up discovered velocity device - * @pdev: PCI device - * @ent: PCI device table entry that matched + * @dev: PCI device + * @info: table of match + * @irq: interrupt info * @bustype: bus that device is connected to * * Configure a discovered adapter from scratch. Return a negative @@ -2969,6 +2969,7 @@ static int velocity_platform_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP /** * wol_calc_crc - WOL CRC + * @size: size of the wake mask * @pattern: data pattern * @mask_pattern: mask * |