summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250_dw.c6
-rw-r--r--drivers/tty/serial/8250/8250_lpc18xx.c2
-rw-r--r--drivers/tty/serial/8250/8250_pci.c6
-rw-r--r--drivers/tty/serial/mxs-auart.c8
-rw-r--r--drivers/tty/serial/pmac_zilog.c14
-rw-r--r--drivers/tty/serial/serial_base.h4
-rw-r--r--drivers/tty/serial/serial_core.c23
-rw-r--r--drivers/tty/serial/serial_port.c34
-rw-r--r--drivers/tty/serial/stm32-usart.c13
9 files changed, 78 insertions, 32 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index a3acbf0f5da1..1300c92b8702 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -356,9 +356,9 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
long rate;
int ret;
+ clk_disable_unprepare(d->clk);
rate = clk_round_rate(d->clk, newrate);
- if (rate > 0 && p->uartclk != rate) {
- clk_disable_unprepare(d->clk);
+ if (rate > 0) {
/*
* Note that any clock-notifer worker will block in
* serial8250_update_uartclk() until we are done.
@@ -366,8 +366,8 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
ret = clk_set_rate(d->clk, newrate);
if (!ret)
p->uartclk = rate;
- clk_prepare_enable(d->clk);
}
+ clk_prepare_enable(d->clk);
dw8250_do_set_termios(p, termios, old);
}
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 7984ee05af1d..47e1a056a60c 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -151,7 +151,7 @@ static int lpc18xx_serial_probe(struct platform_device *pdev)
ret = uart_read_port_properties(&uart.port);
if (ret)
- return ret;
+ goto dis_uart_clk;
uart.port.iotype = UPIO_MEM32;
uart.port.regshift = 2;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0d35c77fad9e..e2e4f99f9d34 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5010,12 +5010,6 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_115200 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_115200 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_460800 },
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 4749331fe618..1e8853eae504 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1086,11 +1086,13 @@ static void mxs_auart_set_ldisc(struct uart_port *port,
static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
{
- u32 istat;
+ u32 istat, stat;
struct mxs_auart_port *s = context;
u32 mctrl_temp = s->mctrl_prev;
- u32 stat = mxs_read(s, REG_STAT);
+ uart_port_lock(&s->port);
+
+ stat = mxs_read(s, REG_STAT);
istat = mxs_read(s, REG_INTR);
/* ack irq */
@@ -1126,6 +1128,8 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
istat &= ~AUART_INTR_TXIS;
}
+ uart_port_unlock(&s->port);
+
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 05d97e89511e..92195f984de1 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -210,7 +210,6 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap)
{
struct tty_port *port;
unsigned char ch, r1, drop, flag;
- int loops = 0;
/* Sanity check, make sure the old bug is no longer happening */
if (uap->port.state == NULL) {
@@ -291,25 +290,12 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap)
if (r1 & Rx_OVR)
tty_insert_flip_char(port, 0, TTY_OVERRUN);
next_char:
- /* We can get stuck in an infinite loop getting char 0 when the
- * line is in a wrong HW state, we break that here.
- * When that happens, I disable the receive side of the driver.
- * Note that what I've been experiencing is a real irq loop where
- * I'm getting flooded regardless of the actual port speed.
- * Something strange is going on with the HW
- */
- if ((++loops) > 1000)
- goto flood;
ch = read_zsreg(uap, R0);
if (!(ch & Rx_CH_AV))
break;
}
return true;
- flood:
- pmz_interrupt_control(uap, 0);
- pmz_error("pmz: rx irq flood !\n");
- return true;
}
static void pmz_status_handle(struct uart_pmac_port *uap)
diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h
index c74c548f0db6..b6c38d2edfd4 100644
--- a/drivers/tty/serial/serial_base.h
+++ b/drivers/tty/serial/serial_base.h
@@ -22,6 +22,7 @@ struct serial_ctrl_device {
struct serial_port_device {
struct device dev;
struct uart_port *port;
+ unsigned int tx_enabled:1;
};
int serial_base_ctrl_init(void);
@@ -30,6 +31,9 @@ void serial_base_ctrl_exit(void);
int serial_base_port_init(void);
void serial_base_port_exit(void);
+void serial_base_port_startup(struct uart_port *port);
+void serial_base_port_shutdown(struct uart_port *port);
+
int serial_base_driver_register(struct device_driver *driver);
void serial_base_driver_unregister(struct device_driver *driver);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index ff85ebd3a007..c476d884356d 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -156,7 +156,7 @@ static void __uart_start(struct uart_state *state)
* enabled, serial_port_runtime_resume() calls start_tx() again
* after enabling the device.
*/
- if (pm_runtime_active(&port_dev->dev))
+ if (!pm_runtime_enabled(port->dev) || pm_runtime_active(&port_dev->dev))
port->ops->start_tx(port);
pm_runtime_mark_last_busy(&port_dev->dev);
pm_runtime_put_autosuspend(&port_dev->dev);
@@ -323,16 +323,26 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state,
bool init_hw)
{
struct tty_port *port = &state->port;
+ struct uart_port *uport;
int retval;
if (tty_port_initialized(port))
- return 0;
+ goto out_base_port_startup;
retval = uart_port_startup(tty, state, init_hw);
- if (retval)
+ if (retval) {
set_bit(TTY_IO_ERROR, &tty->flags);
+ return retval;
+ }
- return retval;
+out_base_port_startup:
+ uport = uart_port_check(state);
+ if (!uport)
+ return -EIO;
+
+ serial_base_port_startup(uport);
+
+ return 0;
}
/*
@@ -355,6 +365,9 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
+ if (uport)
+ serial_base_port_shutdown(uport);
+
if (tty_port_initialized(port)) {
tty_port_set_initialized(port, false);
@@ -1775,6 +1788,7 @@ static void uart_tty_port_shutdown(struct tty_port *port)
uport->ops->stop_rx(uport);
uart_port_unlock_irq(uport);
+ serial_base_port_shutdown(uport);
uart_port_shutdown(port);
/*
@@ -1788,6 +1802,7 @@ static void uart_tty_port_shutdown(struct tty_port *port)
* Free the transmit buffer.
*/
uart_port_lock_irq(uport);
+ uart_circ_clear(&state->xmit);
buf = state->xmit.buf;
state->xmit.buf = NULL;
uart_port_unlock_irq(uport);
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
index 22b9eeb23e68..7e3a1c7b097c 100644
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -39,8 +39,12 @@ static int serial_port_runtime_resume(struct device *dev)
/* Flush any pending TX for the port */
uart_port_lock_irqsave(port, &flags);
+ if (!port_dev->tx_enabled)
+ goto unlock;
if (__serial_port_busy(port))
port->ops->start_tx(port);
+
+unlock:
uart_port_unlock_irqrestore(port, flags);
out:
@@ -60,6 +64,11 @@ static int serial_port_runtime_suspend(struct device *dev)
return 0;
uart_port_lock_irqsave(port, &flags);
+ if (!port_dev->tx_enabled) {
+ uart_port_unlock_irqrestore(port, flags);
+ return 0;
+ }
+
busy = __serial_port_busy(port);
if (busy)
port->ops->start_tx(port);
@@ -71,6 +80,31 @@ static int serial_port_runtime_suspend(struct device *dev)
return busy ? -EBUSY : 0;
}
+static void serial_base_port_set_tx(struct uart_port *port,
+ struct serial_port_device *port_dev,
+ bool enabled)
+{
+ unsigned long flags;
+
+ uart_port_lock_irqsave(port, &flags);
+ port_dev->tx_enabled = enabled;
+ uart_port_unlock_irqrestore(port, flags);
+}
+
+void serial_base_port_startup(struct uart_port *port)
+{
+ struct serial_port_device *port_dev = port->port_dev;
+
+ serial_base_port_set_tx(port, port_dev, true);
+}
+
+void serial_base_port_shutdown(struct uart_port *port)
+{
+ struct serial_port_device *port_dev = port->port_dev;
+
+ serial_base_port_set_tx(port, port_dev, false);
+}
+
static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm,
serial_port_runtime_suspend,
serial_port_runtime_resume, NULL);
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 58d169e5c1db..4fa5a03ebac0 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -861,6 +861,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
u32 sr;
unsigned int size;
+ irqreturn_t ret = IRQ_NONE;
sr = readl_relaxed(port->membase + ofs->isr);
@@ -869,11 +870,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
(sr & USART_SR_TC)) {
stm32_usart_tc_interrupt_disable(port);
stm32_usart_rs485_rts_disable(port);
+ ret = IRQ_HANDLED;
}
- if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG)
+ if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) {
writel_relaxed(USART_ICR_RTOCF,
port->membase + ofs->icr);
+ ret = IRQ_HANDLED;
+ }
if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) {
/* Clear wake up flag and disable wake up interrupt */
@@ -882,6 +886,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE);
if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
pm_wakeup_event(tport->tty->dev, 0);
+ ret = IRQ_HANDLED;
}
/*
@@ -896,6 +901,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
uart_unlock_and_check_sysrq(port);
if (size)
tty_flip_buffer_push(tport);
+ ret = IRQ_HANDLED;
}
}
@@ -903,6 +909,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
uart_port_lock(port);
stm32_usart_transmit_chars(port);
uart_port_unlock(port);
+ ret = IRQ_HANDLED;
}
/* Receiver timeout irq for DMA RX */
@@ -912,9 +919,10 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
uart_unlock_and_check_sysrq(port);
if (size)
tty_flip_buffer_push(tport);
+ ret = IRQ_HANDLED;
}
- return IRQ_HANDLED;
+ return ret;
}
static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -1084,6 +1092,7 @@ static int stm32_usart_startup(struct uart_port *port)
val |= USART_CR2_SWAP;
writel_relaxed(val, port->membase + ofs->cr2);
}
+ stm32_port->throttled = false;
/* RX FIFO Flush */
if (ofs->rqr != UNDEF_REG)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 10:14:22 +0000