diff options
Diffstat (limited to 'drivers/scsi/pm8001/pm8001_init.c')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_init.c | 29 |
1 files changed, 15 insertions, 14 deletions
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 313248c7bab9..47db7e0beae6 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -233,7 +233,7 @@ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque) /** * pm8001_interrupt_handler_intx - main INTx interrupt handler. * @irq: interrupt number - * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure. + * @dev_id: sas_ha structure. The HBA is retrieved from sas_ha structure. */ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id) @@ -439,9 +439,9 @@ err_out: } /** - * pm8001_ioremap - remap the pci high physical address to kernal virtual + * pm8001_ioremap - remap the pci high physical address to kernel virtual * address so that we can access them. - * @pm8001_ha:our hba structure. + * @pm8001_ha: our hba structure. */ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha) { @@ -652,7 +652,7 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, * pm8001_init_sas_add - initialize sas address * @pm8001_ha: our ha struct. * - * Currently we just set the fixed SAS address to our HBA,for manufacture, + * Currently we just set the fixed SAS address to our HBA, for manufacture, * it should read from the EEPROM */ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) @@ -790,7 +790,7 @@ struct pm8001_mpi3_phy_pg_trx_config { }; /** - * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings + * pm8001_get_internal_phy_settings - Retrieves the internal PHY settings * @pm8001_ha : our adapter * @phycfg : PHY config page to populate */ @@ -810,7 +810,7 @@ void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_get_external_phy_settings : Retrieves the external PHY settings + * pm8001_get_external_phy_settings - Retrieves the external PHY settings * @pm8001_ha : our adapter * @phycfg : PHY config page to populate */ @@ -830,7 +830,7 @@ void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext + * pm8001_get_phy_mask - Retrieves the mask that denotes if a PHY is int/ext * @pm8001_ha : our adapter * @phymask : The PHY mask */ @@ -868,7 +868,7 @@ void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask) } /** - * pm8001_set_phy_settings_ven_117c_12G() : Configure ATTO 12Gb PHY settings + * pm8001_set_phy_settings_ven_117c_12G() - Configure ATTO 12Gb PHY settings * @pm8001_ha : our adapter */ static @@ -903,7 +903,7 @@ int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID. + * pm8001_configure_phy_settings - Configures PHY settings based on vendor ID. * @pm8001_ha : our hba. */ static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha) @@ -1053,8 +1053,8 @@ intx: * @ent: pci device id * * This function is the main initialization function, when register a new - * pci driver it is invoked, all struct an hardware initilization should be done - * here, also, register interrupt + * pci driver it is invoked, all struct and hardware initialization should be + * done here, also, register interrupt. */ static int pm8001_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -1172,10 +1172,11 @@ err_out_enable: return rc; } -/* +/** * pm8001_init_ccb_tag - allocate memory to CCB and tag. * @pm8001_ha: our hba card information. * @shost: scsi host which has been allocated outside. + * @pdev: pci device. */ static int pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha, struct Scsi_Host *shost, @@ -1270,7 +1271,7 @@ static void pm8001_pci_remove(struct pci_dev *pdev) * pm8001_pci_suspend - power management suspend main entry point * @dev: Device struct * - * Returns 0 success, anything else error. + * Return: 0 on success, anything else on error. */ static int __maybe_unused pm8001_pci_suspend(struct device *dev) { @@ -1315,7 +1316,7 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev) * pm8001_pci_resume - power management resume main entry point * @dev: Device struct * - * Returns 0 success, anything else error. + * Return: 0 on success, anything else on error. */ static int __maybe_unused pm8001_pci_resume(struct device *dev) { |