diff options
Diffstat (limited to 'drivers/power/supply')
| -rw-r--r-- | drivers/power/supply/bq24190_charger.c | 56 |
1 files changed, 36 insertions, 20 deletions
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index 4cb5741cbb46..6e651fe2743f 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -504,15 +504,7 @@ static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi) static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {} #endif -/* - * According to the "Host Mode and default Mode" section of the - * manual, a write to any register causes the bq24190 to switch - * from default mode to host mode. It will switch back to default - * mode after a WDT timeout unless the WDT is turned off as well. - * So, by simply turning off the WDT, we accomplish both with the - * same write. - */ -static int bq24190_set_mode_host(struct bq24190_dev_info *bdi) +static int bq24190_set_config(struct bq24190_dev_info *bdi) { int ret; u8 v; @@ -523,9 +515,22 @@ static int bq24190_set_mode_host(struct bq24190_dev_info *bdi) bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >> BQ24190_REG_CTTC_WATCHDOG_SHIFT); + + /* + * According to the "Host Mode and default Mode" section of the + * manual, a write to any register causes the bq24190 to switch + * from default mode to host mode. It will switch back to default + * mode after a WDT timeout unless the WDT is turned off as well. + * So, by simply turning off the WDT, we accomplish both with the + * same write. + */ v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK; - return bq24190_write(bdi, BQ24190_REG_CTTC, v); + ret = bq24190_write(bdi, BQ24190_REG_CTTC, v); + if (ret < 0) + return ret; + + return 0; } static int bq24190_register_reset(struct bq24190_dev_info *bdi) @@ -1495,13 +1500,18 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi) if (ret < 0) return ret; - ret = bq24190_set_mode_host(bdi); + ret = bq24190_set_config(bdi); if (ret < 0) return ret; return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); } +static int bq24190_get_config(struct bq24190_dev_info *bdi) +{ + return 0; +} + static int bq24190_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1532,7 +1542,7 @@ static int bq24190_probe(struct i2c_client *client, i2c_set_clientdata(client, bdi); - if (!client->irq) { + if (client->irq <= 0) { dev_err(dev, "Can't get irq info\n"); return -EINVAL; } @@ -1565,12 +1575,6 @@ static int bq24190_probe(struct i2c_client *client, goto out_pmrt; } - ret = bq24190_hw_init(bdi); - if (ret < 0) { - dev_err(dev, "Hardware init failed\n"); - goto out_pmrt; - } - charger_cfg.drv_data = bdi; charger_cfg.supplied_to = bq24190_charger_supplied_to; charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to), @@ -1595,8 +1599,20 @@ static int bq24190_probe(struct i2c_client *client, } } + ret = bq24190_get_config(bdi); + if (ret < 0) { + dev_err(dev, "Can't get devicetree config\n"); + goto out_charger; + } + + ret = bq24190_hw_init(bdi); + if (ret < 0) { + dev_err(dev, "Hardware init failed\n"); + goto out_charger; + } + ret = bq24190_sysfs_create_group(bdi); - if (ret) { + if (ret < 0) { dev_err(dev, "Can't create sysfs entries\n"); goto out_charger; } @@ -1739,7 +1755,7 @@ static __maybe_unused int bq24190_pm_resume(struct device *dev) } bq24190_register_reset(bdi); - bq24190_set_mode_host(bdi); + bq24190_set_config(bdi); bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); if (error >= 0) { |