diff options
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c | 259 |
1 files changed, 259 insertions, 0 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c new file mode 100644 index 000000000000..3f265ac2df20 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/regmap.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> + +/* eUSB2 status registers */ +#define EUSB2_RPTR_STATUS 0x08 +#define RPTR_OK BIT(7) + +/* eUSB2 control registers */ +#define EUSB2_EN_CTL1 0x46 +#define EUSB2_RPTR_EN BIT(7) + +#define EUSB2_FORCE_EN_5 0xe8 +#define F_CLK_19P2M_EN BIT(6) + +#define EUSB2_FORCE_VAL_5 0xeD +#define V_CLK_19P2M_EN BIT(6) + +#define EUSB2_TUNE_IUSB2 0x51 +#define EUSB2_TUNE_SQUELCH_U 0x54 +#define EUSB2_TUNE_USB2_PREEM 0x57 + +#define QCOM_EUSB2_REPEATER_INIT_CFG(o, v) \ + { \ + .offset = o, \ + .val = v, \ + } + +struct eusb2_repeater_init_tbl { + unsigned int offset; + unsigned int val; +}; + +struct eusb2_repeater_cfg { + const struct eusb2_repeater_init_tbl *init_tbl; + int init_tbl_num; + const char * const *vreg_list; + int num_vregs; +}; + +struct eusb2_repeater { + struct device *dev; + struct regmap *regmap; + struct phy *phy; + struct regulator_bulk_data *vregs; + const struct eusb2_repeater_cfg *cfg; + u16 base; + enum phy_mode mode; +}; + +static const char * const pm8550b_vreg_l[] = { + "vdd18", "vdd3", +}; + +static const struct eusb2_repeater_init_tbl pm8550b_init_tbl[] = { + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_IUSB2, 0x8), + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_SQUELCH_U, 0x3), + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_USB2_PREEM, 0x5), +}; + +static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { + .init_tbl = pm8550b_init_tbl, + .init_tbl_num = ARRAY_SIZE(pm8550b_init_tbl), + .vreg_list = pm8550b_vreg_l, + .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), +}; + +static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr) +{ + int num = rptr->cfg->num_vregs; + struct device *dev = rptr->dev; + int i; + + rptr->vregs = devm_kcalloc(dev, num, sizeof(*rptr->vregs), GFP_KERNEL); + if (!rptr->vregs) + return -ENOMEM; + + for (i = 0; i < num; i++) + rptr->vregs[i].supply = rptr->cfg->vreg_list[i]; + + return devm_regulator_bulk_get(dev, num, rptr->vregs); +} + +static int eusb2_repeater_init(struct phy *phy) +{ + struct eusb2_repeater *rptr = phy_get_drvdata(phy); + const struct eusb2_repeater_init_tbl *init_tbl = rptr->cfg->init_tbl; + int num = rptr->cfg->init_tbl_num; + u32 val; + int ret; + int i; + + ret = regulator_bulk_enable(rptr->cfg->num_vregs, rptr->vregs); + if (ret) + return ret; + + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_EN_CTL1, + EUSB2_RPTR_EN, EUSB2_RPTR_EN); + + for (i = 0; i < num; i++) + regmap_update_bits(rptr->regmap, + rptr->base + init_tbl[i].offset, + init_tbl[i].val, init_tbl[i].val); + + ret = regmap_read_poll_timeout(rptr->regmap, + rptr->base + EUSB2_RPTR_STATUS, val, + val & RPTR_OK, 10, 5); + if (ret) + dev_err(rptr->dev, "initialization timed-out\n"); + + return ret; +} + +static int eusb2_repeater_set_mode(struct phy *phy, + enum phy_mode mode, int submode) +{ + struct eusb2_repeater *rptr = phy_get_drvdata(phy); + + switch (mode) { + case PHY_MODE_USB_HOST: + /* + * CM.Lx is prohibited when repeater is already into Lx state as + * per eUSB 1.2 Spec. Below implement software workaround until + * PHY and controller is fixing seen observation. + */ + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, + F_CLK_19P2M_EN, F_CLK_19P2M_EN); + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, + V_CLK_19P2M_EN, V_CLK_19P2M_EN); + break; + case PHY_MODE_USB_DEVICE: + /* + * In device mode clear host mode related workaround as there + * is no repeater reset available, and enable/disable of + * repeater doesn't clear previous value due to shared + * regulators (say host <-> device mode switch). + */ + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, + F_CLK_19P2M_EN, 0); + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, + V_CLK_19P2M_EN, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int eusb2_repeater_exit(struct phy *phy) +{ + struct eusb2_repeater *rptr = phy_get_drvdata(phy); + + return regulator_bulk_disable(rptr->cfg->num_vregs, rptr->vregs); +} + +static const struct phy_ops eusb2_repeater_ops = { + .init = eusb2_repeater_init, + .exit = eusb2_repeater_exit, + .set_mode = eusb2_repeater_set_mode, + .owner = THIS_MODULE, +}; + +static int eusb2_repeater_probe(struct platform_device *pdev) +{ + struct eusb2_repeater *rptr; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct device_node *np = dev->of_node; + u32 res; + int ret; + + rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL); + if (!rptr) + return -ENOMEM; + + rptr->dev = dev; + dev_set_drvdata(dev, rptr); + + rptr->cfg = of_device_get_match_data(dev); + if (!rptr->cfg) + return -EINVAL; + + rptr->regmap = dev_get_regmap(dev->parent, NULL); + if (!rptr->regmap) + return -ENODEV; + + ret = of_property_read_u32(np, "reg", &res); + if (ret < 0) + return ret; + + rptr->base = res; + + ret = eusb2_repeater_init_vregs(rptr); + if (ret < 0) { + dev_err(dev, "unable to get supplies\n"); + return ret; + } + + rptr->phy = devm_phy_create(dev, np, &eusb2_repeater_ops); + if (IS_ERR(rptr->phy)) { + dev_err(dev, "failed to create PHY: %d\n", ret); + return PTR_ERR(rptr->phy); + } + + phy_set_drvdata(rptr->phy, rptr); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + dev_info(dev, "Registered Qcom-eUSB2 repeater\n"); + + return 0; +} + +static int eusb2_repeater_remove(struct platform_device *pdev) +{ + struct eusb2_repeater *rptr = platform_get_drvdata(pdev); + + if (!rptr) + return 0; + + eusb2_repeater_exit(rptr->phy); + + return 0; +} + +static const struct of_device_id eusb2_repeater_of_match_table[] = { + { + .compatible = "qcom,pm8550b-eusb2-repeater", + .data = &pm8550b_eusb2_cfg, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, eusb2_repeater_of_match_table); + +static struct platform_driver eusb2_repeater_driver = { + .probe = eusb2_repeater_probe, + .remove = eusb2_repeater_remove, + .driver = { + .name = "qcom-eusb2-repeater", + .of_match_table = eusb2_repeater_of_match_table, + }, +}; + +module_platform_driver(eusb2_repeater_driver); + +MODULE_DESCRIPTION("Qualcomm PMIC eUSB2 Repeater driver"); +MODULE_LICENSE("GPL"); |