diff options
Diffstat (limited to 'drivers/net/phy/microchip_t1s.c')
| -rw-r--r-- | drivers/net/phy/microchip_t1s.c | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c index 534ca7d1b061..3614839a8e51 100644 --- a/drivers/net/phy/microchip_t1s.c +++ b/drivers/net/phy/microchip_t1s.c @@ -268,6 +268,34 @@ static int lan86xx_read_status(struct phy_device *phydev) return 0; } +/* OPEN Alliance 10BASE-T1x compliance MAC-PHYs will have both C22 and + * C45 registers space. If the PHY is discovered via C22 bus protocol it assumes + * it uses C22 protocol and always uses C22 registers indirect access to access + * C45 registers. This is because, we don't have a clean separation between + * C22/C45 register space and C22/C45 MDIO bus protocols. Resulting, PHY C45 + * registers direct access can't be used which can save multiple SPI bus access. + * To support this feature, set .read_mmd/.write_mmd in the PHY driver to call + * .read_c45/.write_c45 in the OPEN Alliance framework + * drivers/net/ethernet/oa_tc6.c + */ +static int lan865x_phy_read_mmd(struct phy_device *phydev, int devnum, + u16 regnum) +{ + struct mii_bus *bus = phydev->mdio.bus; + int addr = phydev->mdio.addr; + + return __mdiobus_c45_read(bus, addr, devnum, regnum); +} + +static int lan865x_phy_write_mmd(struct phy_device *phydev, int devnum, + u16 regnum, u16 val) +{ + struct mii_bus *bus = phydev->mdio.bus; + int addr = phydev->mdio.addr; + + return __mdiobus_c45_write(bus, addr, devnum, regnum, val); +} + static struct phy_driver microchip_t1s_driver[] = { { PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVB1), @@ -285,6 +313,8 @@ static struct phy_driver microchip_t1s_driver[] = { .features = PHY_BASIC_T1S_P2MP_FEATURES, .config_init = lan865x_revb0_config_init, .read_status = lan86xx_read_status, + .read_mmd = lan865x_phy_read_mmd, + .write_mmd = lan865x_phy_write_mmd, .get_plca_cfg = genphy_c45_plca_get_cfg, .set_plca_cfg = genphy_c45_plca_set_cfg, .get_plca_status = genphy_c45_plca_get_status, |