summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/dec/tulip/eeprom.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/dec/tulip/eeprom.c')
-rw-r--r--drivers/net/ethernet/dec/tulip/eeprom.c383
1 files changed, 383 insertions, 0 deletions
diff --git a/drivers/net/ethernet/dec/tulip/eeprom.c b/drivers/net/ethernet/dec/tulip/eeprom.c
new file mode 100644
index 000000000000..14d5b611783d
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/eeprom.c
@@ -0,0 +1,383 @@
+/*
+ drivers/net/tulip/eeprom.c
+
+ Copyright 2000,2001 The Linux Kernel Team
+ Written/copyright 1994-2001 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Please submit bug reports to http://bugzilla.kernel.org/.
+*/
+
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include "tulip.h"
+#include <linux/init.h>
+#include <asm/unaligned.h>
+
+
+
+/* Serial EEPROM section. */
+/* The main routine to parse the very complicated SROM structure.
+ Search www.digital.com for "21X4 SROM" to get details.
+ This code is very complex, and will require changes to support
+ additional cards, so I'll be verbose about what is going on.
+ */
+
+/* Known cards that have old-style EEPROMs. */
+static struct eeprom_fixup eeprom_fixups[] __devinitdata = {
+ {"Asante", 0, 0, 0x94, {0x1e00, 0x0000, 0x0800, 0x0100, 0x018c,
+ 0x0000, 0x0000, 0xe078, 0x0001, 0x0050, 0x0018 }},
+ {"SMC9332DST", 0, 0, 0xC0, { 0x1e00, 0x0000, 0x0800, 0x041f,
+ 0x0000, 0x009E, /* 10baseT */
+ 0x0004, 0x009E, /* 10baseT-FD */
+ 0x0903, 0x006D, /* 100baseTx */
+ 0x0905, 0x006D, /* 100baseTx-FD */ }},
+ {"Cogent EM100", 0, 0, 0x92, { 0x1e00, 0x0000, 0x0800, 0x063f,
+ 0x0107, 0x8021, /* 100baseFx */
+ 0x0108, 0x8021, /* 100baseFx-FD */
+ 0x0100, 0x009E, /* 10baseT */
+ 0x0104, 0x009E, /* 10baseT-FD */
+ 0x0103, 0x006D, /* 100baseTx */
+ 0x0105, 0x006D, /* 100baseTx-FD */ }},
+ {"Maxtech NX-110", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x0513,
+ 0x1001, 0x009E, /* 10base2, CSR12 0x10*/
+ 0x0000, 0x009E, /* 10baseT */
+ 0x0004, 0x009E, /* 10baseT-FD */
+ 0x0303, 0x006D, /* 100baseTx, CSR12 0x03 */
+ 0x0305, 0x006D, /* 100baseTx-FD CSR12 0x03 */}},
+ {"Accton EN1207", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x051F,
+ 0x1B01, 0x0000, /* 10base2, CSR12 0x1B */
+ 0x0B00, 0x009E, /* 10baseT, CSR12 0x0B */
+ 0x0B04, 0x009E, /* 10baseT-FD,CSR12 0x0B */
+ 0x1B03, 0x006D, /* 100baseTx, CSR12 0x1B */
+ 0x1B05, 0x006D, /* 100baseTx-FD CSR12 0x1B */
+ }},
+ {"NetWinder", 0x00, 0x10, 0x57,
+ /* Default media = MII
+ * MII block, reset sequence (3) = 0x0821 0x0000 0x0001, capabilities 0x01e1
+ */
+ { 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 }
+ },
+ {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset */
+ 0x0000, /* 0 == high offset, 0 == gap */
+ 0x0800, /* Default Autoselect */
+ 0x8001, /* 1 leaf, extended type, bogus len */
+ 0x0003, /* Type 3 (MII), PHY #0 */
+ 0x0400, /* 0 init instr, 4 reset instr */
+ 0x0801, /* Set control mode, GP0 output */
+ 0x0000, /* Drive GP0 Low (RST is active low) */
+ 0x0800, /* control mode, GP0 input (undriven) */
+ 0x0000, /* clear control mode */
+ 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX */
+ 0x01e0, /* Advertise all above */
+ 0x5000, /* FDX all above */
+ 0x1800, /* Set fast TTM in 100bt modes */
+ 0x0000, /* PHY cannot be unplugged */
+ }},
+ {NULL}};
+
+
+static const char *block_name[] __devinitdata = {
+ "21140 non-MII",
+ "21140 MII PHY",
+ "21142 Serial PHY",
+ "21142 MII PHY",
+ "21143 SYM PHY",
+ "21143 reset method"
+};
+
+
+/**
+ * tulip_build_fake_mediatable - Build a fake mediatable entry.
+ * @tp: Ptr to the tulip private data.
+ *
+ * Some cards like the 3x5 HSC cards (J3514A) do not have a standard
+ * srom and can not be handled under the fixup routine. These cards
+ * still need a valid mediatable entry for correct csr12 setup and
+ * mii handling.
+ *
+ * Since this is currently a parisc-linux specific function, the
+ * #ifdef __hppa__ should completely optimize this function away for
+ * non-parisc hardware.
+ */
+static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
+{
+#ifdef CONFIG_GSC
+ if (tp->flags & NEEDS_FAKE_MEDIA_TABLE) {
+ static unsigned char leafdata[] =
+ { 0x01, /* phy number */
+ 0x02, /* gpr setup sequence length */
+ 0x02, 0x00, /* gpr setup sequence */
+ 0x02, /* phy reset sequence length */
+ 0x01, 0x00, /* phy reset sequence */
+ 0x00, 0x78, /* media capabilities */
+ 0x00, 0xe0, /* nway advertisement */
+ 0x00, 0x05, /* fdx bit map */
+ 0x00, 0x06 /* ttm bit map */
+ };
+
+ tp->mtable = kmalloc(sizeof(struct mediatable) +
+ sizeof(struct medialeaf), GFP_KERNEL);
+
+ if (tp->mtable == NULL)
+ return; /* Horrible, impossible failure. */
+
+ tp->mtable->defaultmedia = 0x800;
+ tp->mtable->leafcount = 1;
+ tp->mtable->csr12dir = 0x3f; /* inputs on bit7 for hsc-pci, bit6 for pci-fx */
+ tp->mtable->has_nonmii = 0;
+ tp->mtable->has_reset = 0;
+ tp->mtable->has_mii = 1;
+ tp->mtable->csr15dir = tp->mtable->csr15val = 0;
+ tp->mtable->mleaf[0].type = 1;
+ tp->mtable->mleaf[0].media = 11;
+ tp->mtable->mleaf[0].leafdata = &leafdata[0];
+ tp->flags |= HAS_PHY_IRQ;
+ tp->csr12_shadow = -1;
+ }
+#endif
+}
+
+void __devinit tulip_parse_eeprom(struct net_device *dev)
+{
+ /*
+ dev is not registered at this point, so logging messages can't
+ use dev_<level> or netdev_<level> but dev->name is good via a
+ hack in the caller
+ */
+
+ /* The last media info list parsed, for multiport boards. */
+ static struct mediatable *last_mediatable;
+ static unsigned char *last_ee_data;
+ static int controller_index;
+ struct tulip_private *tp = netdev_priv(dev);
+ unsigned char *ee_data = tp->eeprom;
+ int i;
+
+ tp->mtable = NULL;
+ /* Detect an old-style (SA only) EEPROM layout:
+ memcmp(eedata, eedata+16, 8). */
+ for (i = 0; i < 8; i ++)
+ if (ee_data[i] != ee_data[16+i])
+ break;
+ if (i >= 8) {
+ if (ee_data[0] == 0xff) {
+ if (last_mediatable) {
+ controller_index++;
+ pr_info("%s: Controller %d of multiport board\n",
+ dev->name, controller_index);
+ tp->mtable = last_mediatable;
+ ee_data = last_ee_data;
+ goto subsequent_board;
+ } else
+ pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
+ dev->name);
+ return;
+ }
+ /* Do a fix-up based on the vendor half of the station address prefix. */
+ for (i = 0; eeprom_fixups[i].name; i++) {
+ if (dev->dev_addr[0] == eeprom_fixups[i].addr0 &&
+ dev->dev_addr[1] == eeprom_fixups[i].addr1 &&
+ dev->dev_addr[2] == eeprom_fixups[i].addr2) {
+ if (dev->dev_addr[2] == 0xE8 && ee_data[0x1a] == 0x55)
+ i++; /* An Accton EN1207, not an outlaw Maxtech. */
+ memcpy(ee_data + 26, eeprom_fixups[i].newtable,
+ sizeof(eeprom_fixups[i].newtable));
+ pr_info("%s: Old format EEPROM on '%s' board. Using substitute media control info\n",
+ dev->name, eeprom_fixups[i].name);
+ break;
+ }
+ }
+ if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
+ pr_info("%s: Old style EEPROM with no media selection information\n",
+ dev->name);
+ return;
+ }
+ }
+
+ controller_index = 0;
+ if (ee_data[19] > 1) { /* Multiport board. */
+ last_ee_data = ee_data;
+ }
+subsequent_board:
+
+ if (ee_data[27] == 0) { /* No valid media table. */
+ tulip_build_fake_mediatable(tp);
+ } else {
+ unsigned char *p = (void *)ee_data + ee_data[27];
+ unsigned char csr12dir = 0;
+ int count, new_advertise = 0;
+ struct mediatable *mtable;
+ u16 media = get_u16(p);
+
+ p += 2;
+ if (tp->flags & CSR12_IN_SROM)
+ csr12dir = *p++;
+ count = *p++;
+
+ /* there is no phy information, don't even try to build mtable */
+ if (count == 0) {
+ if (tulip_debug > 0)
+ pr_warn("%s: no phy info, aborting mtable build\n",
+ dev->name);
+ return;
+ }
+
+ mtable = kmalloc(sizeof(struct mediatable) +
+ count * sizeof(struct medialeaf),
+ GFP_KERNEL);
+ if (mtable == NULL)
+ return; /* Horrible, impossible failure. */
+ last_mediatable = tp->mtable = mtable;
+ mtable->defaultmedia = media;
+ mtable->leafcount = count;
+ mtable->csr12dir = csr12dir;
+ mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
+ mtable->csr15dir = mtable->csr15val = 0;
+
+ pr_info("%s: EEPROM default media type %s\n",
+ dev->name,
+ media & 0x0800 ? "Autosense"
+ : medianame[media & MEDIA_MASK]);
+ for (i = 0; i < count; i++) {
+ struct medialeaf *leaf = &mtable->mleaf[i];
+
+ if ((p[0] & 0x80) == 0) { /* 21140 Compact block. */
+ leaf->type = 0;
+ leaf->media = p[0] & 0x3f;
+ leaf->leafdata = p;
+ if ((p[2] & 0x61) == 0x01) /* Bogus, but Znyx boards do it. */
+ mtable->has_mii = 1;
+ p += 4;
+ } else {
+ leaf->type = p[1];
+ if (p[1] == 0x05) {
+ mtable->has_reset = i;
+ leaf->media = p[2] & 0x0f;
+ } else if (tp->chip_id == DM910X && p[1] == 0x80) {
+ /* Hack to ignore Davicom delay period block */
+ mtable->leafcount--;
+ count--;
+ i--;
+ leaf->leafdata = p + 2;
+ p += (p[0] & 0x3f) + 1;
+ continue;
+ } else if (p[1] & 1) {
+ int gpr_len, reset_len;
+
+ mtable->has_mii = 1;
+ leaf->media = 11;
+ gpr_len=p[3]*2;
+ reset_len=p[4+gpr_len]*2;
+ new_advertise |= get_u16(&p[7+gpr_len+reset_len]);
+ } else {
+ mtable->has_nonmii = 1;
+ leaf->media = p[2] & MEDIA_MASK;
+ /* Davicom's media number for 100BaseTX is strange */
+ if (tp->chip_id == DM910X && leaf->media == 1)
+ leaf->media = 3;
+ switch (leaf->media) {
+ case 0: new_advertise |= 0x0020; break;
+ case 4: new_advertise |= 0x0040; break;
+ case 3: new_advertise |= 0x0080; break;
+ case 5: new_advertise |= 0x0100; break;
+ case 6: new_advertise |= 0x0200; break;
+ }
+ if (p[1] == 2 && leaf->media == 0) {
+ if (p[2] & 0x40) {
+ u32 base15 = get_unaligned((u16*)&p[7]);
+ mtable->csr15dir =
+ (get_unaligned((u16*)&p[9])<<16) + base15;
+ mtable->csr15val =
+ (get_unaligned((u16*)&p[11])<<16) + base15;
+ } else {
+ mtable->csr15dir = get_unaligned((u16*)&p[3])<<16;
+ mtable->csr15val = get_unaligned((u16*)&p[5])<<16;
+ }
+ }
+ }
+ leaf->leafdata = p + 2;
+ p += (p[0] & 0x3f) + 1;
+ }
+ if (tulip_debug > 1 && leaf->media == 11) {
+ unsigned char *bp = leaf->leafdata;
+ pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+ dev->name,
+ bp[0], bp[1], bp[2 + bp[1]*2],
+ bp[5 + bp[2 + bp[1]*2]*2],
+ bp[4 + bp[2 + bp[1]*2]*2]);
+ }
+ pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+ dev->name,
+ i, medianame[leaf->media & 15], leaf->media,
+ leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+ leaf->type);
+ }
+ if (new_advertise)
+ tp->sym_advertise = new_advertise;
+ }
+}
+/* Reading a serial EEPROM is a "bit" grungy, but we work our way through:->.*/
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x02 /* EEPROM shift clock. */
+#define EE_CS 0x01 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x04 /* Data from the Tulip to EEPROM. */
+#define EE_WRITE_0 0x01
+#define EE_WRITE_1 0x05
+#define EE_DATA_READ 0x08 /* Data from the EEPROM chip. */
+#define EE_ENB (0x4800 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+ Even at 33Mhz current PCI implementations don't overrun the EEPROM clock.
+ We add a bus turn-around to insure that this remains true. */
+#define eeprom_delay() ioread32(ee_addr)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_READ_CMD (6)
+
+/* Note: this routine returns extra data bits for size detection. */
+int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ee_addr = tp->base_addr + CSR9;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ /* If location is past the end of what we can address, don't
+ * read some other location (ie truncate). Just return zero.
+ */
+ if (location > (1 << addr_len) - 1)
+ return 0;
+
+ iowrite32(EE_ENB & ~EE_CS, ee_addr);
+ iowrite32(EE_ENB, ee_addr);
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ iowrite32(EE_ENB | dataval, ee_addr);
+ eeprom_delay();
+ iowrite32(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
+ retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0);
+ }
+ iowrite32(EE_ENB, ee_addr);
+ eeprom_delay();
+
+ for (i = 16; i > 0; i--) {
+ iowrite32(EE_ENB | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
+ retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0);
+ iowrite32(EE_ENB, ee_addr);
+ eeprom_delay();
+ }
+
+ /* Terminate the EEPROM access. */
+ iowrite32(EE_ENB & ~EE_CS, ee_addr);
+ return (tp->flags & HAS_SWAPPED_SEEPROM) ? swab16(retval) : retval;
+}
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 17:44:16 +0000