diff options
Diffstat (limited to 'drivers/ata/ahci_imx.c')
| -rw-r--r-- | drivers/ata/ahci_imx.c | 196 |
1 files changed, 196 insertions, 0 deletions
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 3f3a7db208ae..787567e840bd 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -26,6 +26,9 @@ #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <linux/libata.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/thermal.h> #include "ahci.h" #define DRV_NAME "ahci-imx" @@ -214,6 +217,180 @@ static int imx_sata_phy_reset(struct ahci_host_priv *hpriv) return timeout ? 0 : -ETIMEDOUT; } +enum { + /* SATA PHY Register */ + SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT = 0x0001, + SATA_PHY_CR_CLOCK_DAC_CTL = 0x0008, + SATA_PHY_CR_CLOCK_RTUNE_CTL = 0x0009, + SATA_PHY_CR_CLOCK_ADC_OUT = 0x000A, + SATA_PHY_CR_CLOCK_MPLL_TST = 0x0017, +}; + +static int read_adc_sum(void *dev, u16 rtune_ctl_reg, void __iomem * mmio) +{ + u16 adc_out_reg, read_sum; + u32 index, read_attempt; + const u32 attempt_limit = 100; + + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio); + imx_phy_reg_write(rtune_ctl_reg, mmio); + + /* two dummy read */ + index = 0; + read_attempt = 0; + adc_out_reg = 0; + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_ADC_OUT, mmio); + while (index < 2) { + imx_phy_reg_read(&adc_out_reg, mmio); + /* check if valid */ + if (adc_out_reg & 0x400) + index++; + + read_attempt++; + if (read_attempt > attempt_limit) { + dev_err(dev, "Read REG more than %d times!\n", + attempt_limit); + break; + } + } + + index = 0; + read_attempt = 0; + read_sum = 0; + while (index < 80) { + imx_phy_reg_read(&adc_out_reg, mmio); + if (adc_out_reg & 0x400) { + read_sum = read_sum + (adc_out_reg & 0x3FF); + index++; + } + read_attempt++; + if (read_attempt > attempt_limit) { + dev_err(dev, "Read REG more than %d times!\n", + attempt_limit); + break; + } + } + + /* Use the U32 to make 1000 precision */ + return (read_sum * 1000) / 80; +} + +/* SATA AHCI temperature monitor */ +static int sata_ahci_read_temperature(void *dev, int *temp) +{ + u16 mpll_test_reg, rtune_ctl_reg, dac_ctl_reg, read_sum; + u32 str1, str2, str3, str4; + int m1, m2, a; + struct ahci_host_priv *hpriv = dev_get_drvdata(dev); + void __iomem *mmio = hpriv->mmio; + + /* check rd-wr to reg */ + read_sum = 0; + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT, mmio); + imx_phy_reg_write(read_sum, mmio); + imx_phy_reg_read(&read_sum, mmio); + if ((read_sum & 0xffff) != 0) + dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum); + + imx_phy_reg_write(0x5A5A, mmio); + imx_phy_reg_read(&read_sum, mmio); + if ((read_sum & 0xffff) != 0x5A5A) + dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum); + + imx_phy_reg_write(0x1234, mmio); + imx_phy_reg_read(&read_sum, mmio); + if ((read_sum & 0xffff) != 0x1234) + dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum); + + /* start temperature test */ + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio); + imx_phy_reg_read(&mpll_test_reg, mmio); + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio); + imx_phy_reg_read(&rtune_ctl_reg, mmio); + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio); + imx_phy_reg_read(&dac_ctl_reg, mmio); + + /* mpll_tst.meas_iv ([12:2]) */ + str1 = (mpll_test_reg >> 2) & 0x7FF; + /* rtune_ctl.mode ([1:0]) */ + str2 = (rtune_ctl_reg) & 0x3; + /* dac_ctl.dac_mode ([14:12]) */ + str3 = (dac_ctl_reg >> 12) & 0x7; + /* rtune_ctl.sel_atbp ([4]) */ + str4 = (rtune_ctl_reg >> 4); + + /* Calculate the m1 */ + /* mpll_tst.meas_iv */ + mpll_test_reg = (mpll_test_reg & 0xE03) | (512) << 2; + /* rtune_ctl.mode */ + rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (1); + /* dac_ctl.dac_mode */ + dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (4) << 12; + /* rtune_ctl.sel_atbp */ + rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (0) << 4; + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio); + imx_phy_reg_write(mpll_test_reg, mmio); + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio); + imx_phy_reg_write(dac_ctl_reg, mmio); + m1 = read_adc_sum(dev, rtune_ctl_reg, mmio); + + /* Calculate the m2 */ + /* rtune_ctl.sel_atbp */ + rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (1) << 4; + m2 = read_adc_sum(dev, rtune_ctl_reg, mmio); + + /* restore the status */ + /* mpll_tst.meas_iv */ + mpll_test_reg = (mpll_test_reg & 0xE03) | (str1) << 2; + /* rtune_ctl.mode */ + rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (str2); + /* dac_ctl.dac_mode */ + dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (str3) << 12; + /* rtune_ctl.sel_atbp */ + rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (str4) << 4; + + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio); + imx_phy_reg_write(mpll_test_reg, mmio); + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio); + imx_phy_reg_write(dac_ctl_reg, mmio); + imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio); + imx_phy_reg_write(rtune_ctl_reg, mmio); + + /* Compute temperature */ + if (!(m2 / 1000)) + m2 = 1000; + a = (m2 - m1) / (m2/1000); + *temp = ((-559) * a * a) / 1000 + (1379) * a + (-458000); + + return 0; +} + +static ssize_t sata_ahci_show_temp(struct device *dev, + struct device_attribute *da, + char *buf) +{ + unsigned int temp = 0; + int err; + + err = sata_ahci_read_temperature(dev, &temp); + if (err < 0) + return err; + + return sprintf(buf, "%u\n", temp); +} + +static const struct thermal_zone_of_device_ops fsl_sata_ahci_of_thermal_ops = { + .get_temp = sata_ahci_read_temperature, +}; + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, sata_ahci_show_temp, NULL, 0); + +static struct attribute *fsl_sata_ahci_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; +ATTRIBUTE_GROUPS(fsl_sata_ahci); + static int imx_sata_enable(struct ahci_host_priv *hpriv) { struct imx_ahci_priv *imxpriv = hpriv->plat_data; @@ -597,6 +774,25 @@ static int imx_ahci_probe(struct platform_device *pdev) if (ret) return ret; + if (imxpriv->type == AHCI_IMX53 && + IS_ENABLED(CONFIG_HWMON)) { + /* Add the temperature monitor */ + struct device *hwmon_dev; + + hwmon_dev = + devm_hwmon_device_register_with_groups(dev, + "sata_ahci", + hpriv, + fsl_sata_ahci_groups); + if (IS_ERR(hwmon_dev)) { + ret = PTR_ERR(hwmon_dev); + goto disable_clk; + } + devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev, + &fsl_sata_ahci_of_thermal_ops); + dev_info(dev, "%s: sensor 'sata_ahci'\n", dev_name(hwmon_dev)); + } + ret = imx_sata_enable(hpriv); if (ret) goto disable_clk; |