diff options
Diffstat (limited to 'arch/arm')
786 files changed, 18386 insertions, 8871 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 51c8df561077..7e3d53575486 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -3,11 +3,12 @@ config ARM bool default y select ARCH_CLOCKSOURCE_DATA - select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID - select ARCH_HAS_DEBUG_VIRTUAL + select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID && !KEXEC + select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_SET_MEMORY + select ARCH_HAS_PHYS_TO_DMA select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL select ARCH_HAS_STRICT_MODULE_RWX if MMU select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST @@ -24,7 +25,7 @@ config ARM select CLONE_BACKWARDS select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS - select DMA_NOOP_OPS if !MMU + select DMA_DIRECT_OPS if !MMU select EDAC_SUPPORT select EDAC_ATOMIC_SCRUB select GENERIC_ALLOCATOR @@ -50,6 +51,7 @@ config ARM select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU select HAVE_ARCH_MMAP_RND_BITS if MMU select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) + select HAVE_ARCH_THREAD_STRUCT_WHITELIST select HAVE_ARCH_TRACEHOOK select HAVE_ARM_SMCCC if CPU_V7 select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32 @@ -99,6 +101,7 @@ config ARM select OLD_SIGACTION select OLD_SIGSUSPEND3 select PERF_USE_VMALLOC + select REFCOUNT_FULL select RTC_LIB select SYS_SUPPORTS_APM_EMULATION # Above selects are sorted alphabetically; please add new ones @@ -595,6 +598,7 @@ config ARCH_S3C24XX select MULTI_IRQ_HANDLER select NEED_MACH_IO_H select SAMSUNG_ATAGS + select USE_OF help Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST @@ -1524,12 +1528,10 @@ config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K default y if CPU_THUMBONLY - select ARM_ASM_UNIFIED select ARM_UNWIND help By enabling this option, the kernel will be compiled in - Thumb-2 mode. A compiler/assembler that understand the unified - ARM-Thumb syntax is needed. + Thumb-2 mode. If unsure, say N. @@ -1564,9 +1566,6 @@ config THUMB2_AVOID_R_ARM_THM_JUMP11 Unless you are sure your tools don't have this problem, say Y. -config ARM_ASM_UNIFIED - bool - config ARM_PATCH_IDIV bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" depends on CPU_32v7 && !XIP_KERNEL diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 17685e19aed8..78a647080ebc 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -3,10 +3,14 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config ARM_PTDUMP +config ARM_PTDUMP_CORE + def_bool n + +config ARM_PTDUMP_DEBUGFS bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL depends on MMU + select ARM_PTDUMP_CORE select DEBUG_FS ---help--- Say Y here if you want to show the kernel pagetable layout in a @@ -16,6 +20,33 @@ config ARM_PTDUMP kernel. If in doubt, say "N" +config DEBUG_WX + bool "Warn on W+X mappings at boot" + select ARM_PTDUMP_CORE + ---help--- + Generate a warning if any W+X mappings are found at boot. + + This is useful for discovering cases where the kernel is leaving + W+X mappings after applying NX, as such mappings are a security risk. + + Look for a message in dmesg output like this: + + arm/mm: Checked W+X mappings: passed, no W+X pages found. + + or like this, if the check failed: + + arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found. + + Note that even if the check fails, your kernel is possibly + still fine, as W+X mappings are not a security hole in + themselves, what they do is that they make the exploitation + of other unfixed kernel bugs easier. + + There is no runtime or memory usage effect of this option + once the kernel has booted up - it's a one time check. + + If in doubt, say "Y". + # RMK wants arm kernels compiled with frame pointers or stack unwinding. # If you know what you are doing and are willing to live without stack # traces, you can get a slightly smaller kernel by setting this option to diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 80351e505fd5..e83f5161fdd8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -115,9 +115,11 @@ ifeq ($(CONFIG_ARM_UNWIND),y) CFLAGS_ABI +=-funwind-tables endif +# Accept old syntax despite ".syntax unified" +AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) + ifeq ($(CONFIG_THUMB2_KERNEL),y) AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) -AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: @@ -125,7 +127,7 @@ ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) KBUILD_CFLAGS_MODULE +=-fno-optimize-sibling-calls endif else -CFLAGS_ISA :=$(call cc-option,-marm,) +CFLAGS_ISA :=$(call cc-option,-marm,) $(AFLAGS_NOWARN) AFLAGS_ISA :=$(CFLAGS_ISA) endif diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c index 309e1bbad75d..13c90abc68d6 100644 --- a/arch/arm/boot/compressed/string.c +++ b/arch/arm/boot/compressed/string.c @@ -130,8 +130,3 @@ void *memset(void *s, int c, size_t count) *xs++ = c; return s; } - -void __memzero(void *s, size_t count) -{ - memset(s, 0, count); -} diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index e6bf6774c4bb..2b963d8e76dd 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -56,6 +56,7 @@ SECTIONS .rodata : { *(.rodata) *(.rodata.*) + *(.data.rel.ro) } .piggydata : { *(.piggydata) @@ -101,6 +102,12 @@ SECTIONS * this symbol allows further debug in the near future. */ .image_end (NOLOAD) : { + /* + * EFI requires that the image is aligned to 512 bytes, and appended + * DTB requires that we know where the end of the image is. Ensure + * that both are satisfied by ensuring that there are no additional + * sections emitted into the decompressor image. + */ _edata_real = .; } @@ -128,3 +135,4 @@ SECTIONS .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } } +ASSERT(_edata_real == _edata, "error: zImage file size is incorrect"); diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d0381e9caf21..ade7a38543dc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,6 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -ifeq ($(CONFIG_OF),y) - dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb dtb-$(CONFIG_MACH_ARTPEC6) += \ @@ -47,7 +45,9 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2.dtb \ + at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ + at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ at91-tse850-3.dtb \ @@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ + gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ gemini-rut1xx.dtb \ gemini-sq201.dtb \ @@ -372,6 +373,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos2_7.dtb \ imx6dl-colibri-eval-v3.dtb \ imx6dl-cubox-i.dtb \ + imx6dl-cubox-i-emmc-som-v15.dtb \ + imx6dl-cubox-i-som-v15.dtb \ imx6dl-dfi-fs700-m60.dtb \ imx6dl-gw51xx.dtb \ imx6dl-gw52xx.dtb \ @@ -384,6 +387,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw5903.dtb \ imx6dl-gw5904.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-hummingboard-emmc-som-v15.dtb \ + imx6dl-hummingboard-som-v15.dtb \ + imx6dl-hummingboard2.dtb \ + imx6dl-hummingboard2-emmc-som-v15.dtb \ + imx6dl-hummingboard2-som-v15.dtb \ imx6dl-icore.dtb \ imx6dl-icore-rqs.dtb \ imx6dl-nit6xlite.dtb \ @@ -396,6 +404,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabresd.dtb \ imx6dl-savageboard.dtb \ imx6dl-ts4900.dtb \ + imx6dl-ts7970.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ imx6dl-tx6s-8034-mb7.dtb \ @@ -421,6 +430,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-b850v3.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ + imx6q-cubox-i-emmc-som-v15.dtb \ + imx6q-cubox-i-som-v15.dtb \ imx6q-dfi-fs700-m60.dtb \ imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ @@ -439,6 +450,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw5904.dtb \ imx6q-h100.dtb \ imx6q-hummingboard.dtb \ + imx6q-hummingboard-emmc-som-v15.dtb \ + imx6q-hummingboard-som-v15.dtb \ + imx6q-hummingboard2.dtb \ + imx6q-hummingboard2-emmc-som-v15.dtb \ + imx6q-hummingboard2-som-v15.dtb \ imx6q-icore.dtb \ imx6q-icore-ofcap10.dtb \ imx6q-icore-ofcap12.dtb \ @@ -459,6 +475,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ imx6q-ts4900.dtb \ + imx6q-ts7970.dtb \ imx6q-tx6q-1010.dtb \ imx6q-tx6q-1010-comtft.dtb \ imx6q-tx6q-1020.dtb \ @@ -470,6 +487,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ imx6q-utilite-pro.dtb \ + imx6q-var-dt6customboard.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ imx6q-wandboard-revd1.dtb \ @@ -511,15 +529,17 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ + imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ - imx7d-pico.dtb \ + imx7d-pico-pi.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ imx7d-sdb-sht11.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-warp.dtb dtb-$(CONFIG_SOC_LS1021A) += \ + ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ @@ -558,6 +578,7 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx28-m28cu3.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ + imx28-ts4600.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_NOMADIK) += \ ste-nomadik-s8815.dtb \ @@ -689,6 +710,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ am571x-idk.dtb \ + am574x-idk.dtb \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ @@ -707,12 +729,13 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_ACTIONS) += \ owl-s500-cubieboard6.dtb \ - owl-s500-guitar-bb-rev-b.dtb + owl-s500-guitar-bb-rev-b.dtb \ + owl-s500-sparky.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb dtb-$(CONFIG_ARCH_OXNAS) += \ - wd-mbwe.dtb \ - cloudengines-pogoplug-series-3.dtb + ox810se-wd-mbwe.dtb \ + ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-arrow-sd-600eval.dtb \ @@ -756,6 +779,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ r8a7745-iwg22d-sodimm.dtb \ + r8a7745-iwg22d-sodimm-dbhd-ca.dtb \ r8a7745-sk-rzg1e.dtb \ r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ @@ -949,9 +973,11 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a83t-bananapi-m3.dtb \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-a83t-tbs-a711.dtb \ + sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ + sun8i-h3-libretech-all-h3-cc.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ @@ -1101,7 +1127,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb -dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \ +dtb-$(CONFIG_ARCH_ASPEED) += \ + aspeed-ast2500-evb.dtb \ + aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ - aspeed-ast2500-evb.dtb -endif + aspeed-bmc-opp-witherspoon.dtb \ + aspeed-bmc-opp-zaius.dtb \ + aspeed-bmc-quanta-q71l.dtb diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 48a15fc641f2..e67b4d65c8d0 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -409,6 +409,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index cdc1b2be792f..3f2480d05a3b 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -159,6 +159,7 @@ >; }; + /* UT0 */ uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ @@ -166,6 +167,37 @@ >; }; + /* UT1 */ + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* (D16) uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (D15) uart1_txd.uart1_txd */ + >; + }; + + /* GPS */ + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */ + AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (B17) spi0_d0.uart2_txd */ + >; + }; + + /* DSM2 */ + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ + >; + }; + + /* UT5 */ + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8C4, PIN_INPUT_PULLUP | MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */ + AM33XX_IOPAD(0x8C0, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* (U1) lcd_data8.uart5_txd */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ @@ -216,10 +248,19 @@ wl18xx_pins: pinmux_wl18xx_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */ + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ >; }; + + /* DCAN */ + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */ + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */ + AM33XX_IOPAD(0x940, PIN_OUTPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ + >; + }; }; &uart0 { @@ -229,6 +270,34 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; + + status = "okay"; +}; + &usb { status = "okay"; }; @@ -414,7 +483,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio0>; - interrupts = <29 IRQ_TYPE_EDGE_RISING>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; }; }; @@ -446,10 +515,16 @@ &rtc { system-power-controller; - clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + &gpio3 { ls_buf_en { gpio-hog; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index ddd897556e03..fee6b3ee1741 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -790,6 +790,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 9ba4b18c0cb2..fa608cd5dc14 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -722,6 +722,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 03c7d77023c6..9fb7426070ce 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -139,7 +139,7 @@ &audio_codec { status = "okay"; - gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; AVDD-supply = <&ldo3_reg>; IOVDD-supply = <&ldo3_reg>; DRVDD-supply = <&ldo3_reg>; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 8d8319590cde..95d5c9d136c5 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -292,14 +292,6 @@ clock-div = <4>; }; - cefuse_fck: cefuse_fck@a20 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_clkin_ck>; - ti,bit-shift = <1>; - reg = <0x0a20>; - }; - clk_24mhz: clk_24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -316,14 +308,6 @@ clock-div = <732>; }; - clkdiv32k_ick: clkdiv32k_ick@14c { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ck>; - ti,bit-shift = <1>; - reg = <0x014c>; - }; - l3_gclk: l3_gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -350,49 +334,49 @@ timer1_fck: timer1_fck@528 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; + clocks = <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; reg = <0x0528>; }; timer2_fck: timer2_fck@508 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0508>; }; timer3_fck: timer3_fck@50c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x050c>; }; timer4_fck: timer4_fck@510 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0510>; }; timer5_fck: timer5_fck@518 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0518>; }; timer6_fck: timer6_fck@51c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x051c>; }; timer7_fck: timer7_fck@504 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0504>; }; @@ -423,7 +407,7 @@ wdt1_fck: wdt1_fck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; + clocks = <&clk_rc32k_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0538>; }; @@ -493,42 +477,10 @@ gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>; + clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x053c>; }; - gpio0_dbclk: gpio0_dbclk@408 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&gpio0_dbclk_mux_ck>; - ti,bit-shift = <18>; - reg = <0x0408>; - }; - - gpio1_dbclk: gpio1_dbclk@ac { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <18>; - reg = <0x00ac>; - }; - - gpio2_dbclk: gpio2_dbclk@b0 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <18>; - reg = <0x00b0>; - }; - - gpio3_dbclk: gpio3_dbclk@b4 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <18>; - reg = <0x00b4>; - }; - lcd_gclk: lcd_gclk@534 { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -577,58 +529,6 @@ reg = <0x0700>; }; - dbg_sysclk_ck: dbg_sysclk_ck@414 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_clkin_ck>; - ti,bit-shift = <19>; - reg = <0x0414>; - }; - - dbg_clka_ck: dbg_clka_ck@414 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_core_m4_ck>; - ti,bit-shift = <30>; - reg = <0x0414>; - }; - - stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck@414 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; - ti,bit-shift = <22>; - reg = <0x0414>; - }; - - trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck@414 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; - ti,bit-shift = <20>; - reg = <0x0414>; - }; - - stm_clk_div_ck: stm_clk_div_ck@414 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&stm_pmd_clock_mux_ck>; - ti,bit-shift = <27>; - ti,max-div = <64>; - reg = <0x0414>; - ti,index-power-of-two; - }; - - trace_clk_div_ck: trace_clk_div_ck@414 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&trace_pmd_clk_mux_ck>; - ti,bit-shift = <24>; - ti,max-div = <64>; - reg = <0x0414>; - ti,index-power-of-two; - }; - clkout2_ck: clkout2_ck@700 { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -638,9 +538,88 @@ }; }; -&prcm_clockdomains { - clk_24mhz_clkdm: clk_24mhz_clkdm { - compatible = "ti,clockdomain"; - clocks = <&clkdiv32k_ick>; +&prcm { + l4_per_cm: l4_per_cm@0 { + compatible = "ti,omap4-cm"; + reg = <0x0 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x200>; + + l4_per_clkctrl: clk@14 { + compatible = "ti,clkctrl"; + reg = <0x14 0x13c>; + #clock-cells = <2>; + }; + }; + + l4_wkup_cm: l4_wkup_cm@400 { + compatible = "ti,omap4-cm"; + reg = <0x400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x100>; + + l4_wkup_clkctrl: clk@4 { + compatible = "ti,clkctrl"; + reg = <0x4 0xd4>; + #clock-cells = <2>; + }; + }; + + mpu_cm: mpu_cm@600 { + compatible = "ti,omap4-cm"; + reg = <0x600 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x600 0x100>; + + mpu_clkctrl: clk@4 { + compatible = "ti,clkctrl"; + reg = <0x4 0x4>; + #clock-cells = <2>; + }; + }; + + l4_rtc_cm: l4_rtc_cm@800 { + compatible = "ti,omap4-cm"; + reg = <0x800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x100>; + + l4_rtc_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x4>; + #clock-cells = <2>; + }; + }; + + gfx_l3_cm: gfx_l3_cm@900 { + compatible = "ti,omap4-cm"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x900 0x100>; + + gfx_l3_clkctrl: clk@4 { + compatible = "ti,clkctrl"; + reg = <0x4 0x4>; + #clock-cells = <2>; + }; + }; + + l4_cefuse_cm: l4_cefuse_cm@a00 { + compatible = "ti,omap4-cm"; + reg = <0xa00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa00 0x100>; + + l4_cefuse_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index d37f95025807..628c77b0b386 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/am33xx.h> +#include <dt-bindings/clock/am3.h> / { compatible = "ti,am33xx"; @@ -179,8 +180,11 @@ }; prcm: prcm@200000 { - compatible = "ti,am3-prcm"; + compatible = "ti,am3-prcm", "simple-bus"; reg = <0x200000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x200000 0x4000>; prcm_clocks: clocks { #address-cells = <1>; @@ -496,7 +500,7 @@ status = "disabled"; }; - mailbox: mailbox@480C8000 { + mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480C8000 0x200>; interrupts = <77>; @@ -517,6 +521,8 @@ interrupts = <67>; ti,hwmods = "timer1"; ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; }; timer2: timer@48040000 { @@ -524,6 +530,8 @@ reg = <0x48040000 0x400>; interrupts = <68>; ti,hwmods = "timer2"; + clocks = <&timer2_fck>; + clock-names = "fck"; }; timer3: timer@48042000 { @@ -571,7 +579,7 @@ interrupts = <75 76>; ti,hwmods = "rtc"; - clocks = <&clkdiv32k_ick>; + clocks = <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; clock-names = "int-clk"; }; @@ -991,7 +999,7 @@ dma-names = "tx", "rx"; }; - mcasp1: mcasp@4803C000 { + mcasp1: mcasp@4803c000 { compatible = "ti,am33xx-mcasp-audio"; ti,hwmods = "mcasp1"; reg = <0x4803C000 0x2000>, @@ -1014,4 +1022,4 @@ }; }; -/include/ "am33xx-clocks.dtsi" +#include "am33xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 00da3f2c4072..ca294914bbb1 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -26,7 +26,7 @@ interrupt-names = "mc"; }; - davinci_emac: ethernet@0x5c000000 { + davinci_emac: ethernet@5c000000 { compatible = "ti,am3517-emac"; ti,hwmods = "davinci_emac"; status = "disabled"; @@ -41,7 +41,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; }; - davinci_mdio: ethernet@0x5c030000 { + davinci_mdio: ethernet@5c030000 { compatible = "ti,davinci_mdio"; ti,hwmods = "davinci_mdio"; status = "disabled"; @@ -99,9 +99,5 @@ status = "disabled"; }; -&smartreflex_mpu_iva { - status = "disabled"; -}; - /include/ "am35xx-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 4714a59fd86d..964f3ef79728 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/am4.h> / { compatible = "ti,am4372", "ti,am43"; @@ -163,9 +164,12 @@ }; prcm: prcm@1f0000 { - compatible = "ti,am4-prcm"; + compatible = "ti,am4-prcm", "simple-bus"; reg = <0x1f0000 0x11000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1f0000 0x11000>; prcm_clocks: clocks { #address-cells = <1>; @@ -325,7 +329,7 @@ status = "disabled"; }; - mailbox: mailbox@480C8000 { + mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480C8000 0x200>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; @@ -346,6 +350,8 @@ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,timer-alwon; ti,hwmods = "timer1"; + clocks = <&timer1_fck>; + clock-names = "fck"; }; timer2: timer@48040000 { @@ -353,6 +359,8 @@ reg = <0x48040000 0x400>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer2"; + clocks = <&timer2_fck>; + clock-names = "fck"; }; timer3: timer@48042000 { @@ -936,7 +944,7 @@ dma-names = "tx", "rx"; }; - mcasp1: mcasp@4803C000 { + mcasp1: mcasp@4803c000 { compatible = "ti,am33xx-mcasp-audio"; ti,hwmods = "mcasp1"; reg = <0x4803C000 0x2000>, @@ -993,7 +1001,7 @@ reg = <0x483a8000 0x8000>; syscon-phy-power = <&scm_conf 0x620>; clocks = <&usb_phy0_always_on_clk32k>, - <&usb_otg_ss0_refclk960m>; + <&l4_per_clkctrl AM4_USB_OTG_SS0_CLKCTRL 8>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; status = "disabled"; @@ -1012,7 +1020,7 @@ reg = <0x483e8000 0x8000>; syscon-phy-power = <&scm_conf 0x628>; clocks = <&usb_phy1_always_on_clk32k>, - <&usb_otg_ss1_refclk960m>; + <&l4_per_clkctrl AM4_USB_OTG_SS1_CLKCTRL 8>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; status = "disabled"; @@ -1175,4 +1183,4 @@ }; }; -/include/ "am43xx-clocks.dtsi" +#include "am43xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index afb8eb0a0a16..c3b1a3fb5a2e 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -55,7 +55,7 @@ enable-active-high; }; - backlight { + lcd_bl: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -86,6 +86,8 @@ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; label = "lcd"; + backlight = <&lcd_bl>; + panel-timing { clock-frequency = <33000000>; hactive = <800>; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 5e364473067f..20132477a871 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -519,3 +519,17 @@ &cpu { cpu0-supply = <&tps>; }; + +&cpu0_opp_table { + /* + * Supply voltage supervisor on board will not allow opp50 so + * disable it and set opp100 as suspend OPP. + */ + opp50@300000000 { + status = "disabled"; + }; + + opp100@600000000 { + opp-suspend; + }; +}; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 2c6bf0684f50..3fa3b226995d 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -35,7 +35,7 @@ clock-frequency = <32768>; }; - backlight { + lcd_bl: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -132,6 +132,8 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_pins>; + backlight = <&lcd_bl>; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; panel-timing { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index a04d79ec212a..00c3d1de384f 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -48,6 +48,8 @@ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; label = "lcd"; + backlight = <&lcd_bl>; + panel-timing { clock-frequency = <33000000>; hactive = <800>; @@ -107,7 +109,7 @@ 0x03030069>; /* LEFT */ }; - backlight { + lcd_bl: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -985,7 +987,11 @@ rx-num-evt = <32>; }; -&synctimer_32kclk { +&mux_synctimer32k_ck { assigned-clocks = <&mux_synctimer32k_ck>; assigned-clock-parents = <&clkdiv32k_ick>; }; + +&cpu { + cpu0-supply = <&dcdc2>; +}; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 430be5829f8f..a7037a4b4fd4 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -524,54 +524,6 @@ reg = <0x4240>; }; - gpio0_dbclk: gpio0_dbclk@2b68 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&gpio0_dbclk_mux_ck>; - ti,bit-shift = <8>; - reg = <0x2b68>; - }; - - gpio1_dbclk: gpio1_dbclk@8c78 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c78>; - }; - - gpio2_dbclk: gpio2_dbclk@8c80 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c80>; - }; - - gpio3_dbclk: gpio3_dbclk@8c88 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c88>; - }; - - gpio4_dbclk: gpio4_dbclk@8c90 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c90>; - }; - - gpio5_dbclk: gpio5_dbclk@8c98 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <8>; - reg = <0x8c98>; - }; - mmc_clk: mmc_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -629,14 +581,6 @@ reg = <0x4230>; }; - synctimer_32kclk: synctimer_32kclk@2a30 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&mux_synctimer32k_ck>; - ti,bit-shift = <8>; - reg = <0x2a30>; - }; - timer8_fck: timer8_fck@421c { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -763,110 +707,76 @@ ti,bit-shift = <8>; reg = <0x2a48>; }; +}; - usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m@8a60 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_per_clkdcoldo>; - ti,bit-shift = <8>; - reg = <0x8a60>; - }; - - usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@8a68 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_per_clkdcoldo>; - ti,bit-shift = <8>; - reg = <0x8a68>; - }; - - clkout1_osc_div_ck: clkout1_osc_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&sys_clkin_ck>; - ti,bit-shift = <20>; - ti,max-div = <4>; - reg = <0x4100>; - }; - - clkout1_src2_mux_ck: clkout1_src2_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, - <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, - <&dpll_mpu_m2_ck>; - reg = <0x4100>; - }; - - clkout1_src2_pre_div_ck: clkout1_src2_pre_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout1_src2_mux_ck>; - ti,bit-shift = <4>; - ti,max-div = <8>; - reg = <0x4100>; - }; - - clkout1_src2_post_div_ck: clkout1_src2_post_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout1_src2_pre_div_ck>; - ti,bit-shift = <8>; - ti,max-div = <32>; - ti,index-power-of-two; - reg = <0x4100>; - }; - - clkout1_mux_ck: clkout1_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, - <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; - ti,bit-shift = <16>; - reg = <0x4100>; - }; - - clkout1_ck: clkout1_ck { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout1_mux_ck>; - ti,bit-shift = <23>; - reg = <0x4100>; - }; - - clkout2_src_mux_ck: clkout2_src_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, - <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, - <&dpll_mpu_m2_ck>, <&dpll_extdev_ck>; - reg = <0x4108>; - }; - - clkout2_pre_div_ck: clkout2_pre_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout2_src_mux_ck>; - ti,bit-shift = <4>; - ti,max-div = <8>; - reg = <0x4108>; - }; - - clkout2_post_div_ck: clkout2_post_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout2_pre_div_ck>; - ti,bit-shift = <8>; - ti,max-div = <32>; - ti,index-power-of-two; - reg = <0x4108>; - }; - - clkout2_ck: clkout2_ck { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout2_post_div_ck>; - ti,bit-shift = <16>; - reg = <0x4108>; +&prcm { + l4_wkup_cm: l4_wkup_cm@2800 { + compatible = "ti,omap4-cm"; + reg = <0x2800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2800 0x400>; + + l4_wkup_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x34c>; + #clock-cells = <2>; + }; + }; + + mpu_cm: mpu_cm@8300 { + compatible = "ti,omap4-cm"; + reg = <0x8300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8300 0x100>; + + mpu_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + gfx_l3_cm: gfx_l3_cm@8400 { + compatible = "ti,omap4-cm"; + reg = <0x8400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8400 0x100>; + + gfx_l3_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l4_rtc_cm: l4_rtc_cm@8500 { + compatible = "ti,omap4-cm"; + reg = <0x8500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8500 0x100>; + + l4_rtc_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l4_per_cm: l4_per_cm@8800 { + compatible = "ti,omap4-cm"; + reg = <0x8800 0xc00>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8800 0xc00>; + + l4_per_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xb04>; + #clock-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index debf9464403e..6d3c83743156 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -117,3 +117,7 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; + +&cpu0 { + vdd-supply = <&smps12_reg>; +}; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi new file mode 100644 index 000000000000..c6d858b31011 --- /dev/null +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "am57xx-idk-common.dtsi" + +/ { + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + status-leds { + compatible = "gpio-leds"; + cpu0-led { + label = "status0:red:cpu0"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu0"; + }; + + usr0-led { + label = "status0:green:usr"; + gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + heartbeat-led { + label = "status0:blue:heartbeat"; + gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + cpu1-led { + label = "status1:red:cpu1"; + gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu1"; + }; + + usr1-led { + label = "status1:green:usr"; + gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + mmc0-led { + label = "status1:blue:mmc0"; + gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + +&extcon_usb2 { + id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; +}; + +&sn65hvs882 { + load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; +}; + +&pcie1_rc { + status = "okay"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&pcie1_ep { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index a578fe97ba3b..9ab0af5017df 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -9,8 +9,7 @@ /dts-v1/; #include "dra74x.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "am572x-idk-common.dtsi" #include "am57xx-idk-common.dtsi" #include "dra74x-mmc-iodelay.dtsi" @@ -18,54 +17,6 @@ model = "TI AM5728 IDK"; compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x80000000>; - }; - - status-leds { - compatible = "gpio-leds"; - cpu0-led { - label = "status0:red:cpu0"; - gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "cpu0"; - }; - - usr0-led { - label = "status0:green:usr"; - gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - heartbeat-led { - label = "status0:blue:heartbeat"; - gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "heartbeat"; - }; - - cpu1-led { - label = "status1:red:cpu1"; - gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "cpu1"; - }; - - usr1-led { - label = "status1:green:usr"; - gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - mmc0-led { - label = "status1:blue:mmc0"; - gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc0"; - }; - }; }; &mmc1 { @@ -86,44 +37,6 @@ pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - -&extcon_usb2 { - id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; -}; - -&sn65hvs882 { - load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; -}; - -&pcie1_rc { - status = "okay"; - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - -&pcie1_ep { - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; +&cpu0 { + vdd-supply = <&smps12_reg>; }; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts new file mode 100644 index 000000000000..41e12a382d2f --- /dev/null +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + */ + + +/dts-v1/; + +#include "dra76x.dtsi" +#include "am572x-idk-common.dtsi" + +/ { + model = "TI AM5748 IDK"; + compatible = "ti,am5728-idk", "ti,dra762", "ti,dra7"; +}; + +&qspi { + spi-max-frequency = <96000000>; + m25p80@0 { + spi-max-frequency = <96000000>; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 49aeecd312b4..ab60035bc50c 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -388,7 +388,7 @@ }; &cpu0 { - cpu0-supply = <&smps12_reg>; + vdd-supply = <&smps12_reg>; voltage-tolerance = <1>; }; @@ -554,7 +554,7 @@ &mcasp3 { #sound-dai-cells = <0>; - assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&sys_clkin2>; status = "okay"; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 26ade8c0a960..b67a75179784 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -43,6 +43,18 @@ ahb { apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usart0: serial@fffb0000 { pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; linux,rs485-enabled-at-boot-time; diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi index 7b8d90b7aeea..29b636fce23f 100644 --- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi @@ -150,11 +150,6 @@ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; }; -&charlcd { - interrupt-parent = <&intc>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; -}; - &serial0 { interrupt-parent = <&intc>; interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 00ff549d4e39..a6cc568f74f7 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -279,6 +279,11 @@ marvell,function = "dev"; }; + nand_rb: nand-rb { + marvell,pins = "mpp41"; + marvell,function = "nand"; + }; + uart0_pins: uart-pins-0 { marvell,pins = "mpp0", "mpp1"; marvell,function = "ua0"; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 602bc10fdaf4..91a36c1f029b 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ /dts-v1/; #include "aspeed-g5.dtsi" @@ -16,7 +16,7 @@ bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index c786bc2f2919..4379d09a261f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ /dts-v1/; #include "aspeed-g4.dtsi" @@ -12,7 +12,7 @@ bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { + memory@40000000 { reg = <0x40000000 0x20000000>; }; @@ -34,6 +34,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; +#include "openbmc-flash-layout.dtsi" }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 8067793129ea..623b6ab42021 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -1,23 +1,19 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ /dts-v1/; - #include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> / { model = "Romulus BMC"; compatible = "ibm,romulus-bmc", "aspeed,ast2500"; - aliases { - serial4 = &uart5; - }; - chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { - reg = <0x80000000 0x40000000>; + memory@80000000 { + reg = <0x80000000 0x20000000>; }; reserved-memory { @@ -29,6 +25,49 @@ no-map; reg = <0xbf000000 0x01000000>; /* 16M */ }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + }; + + power { + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; }; }; @@ -38,6 +77,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; +#include "openbmc-flash-layout.dtsi" }; }; @@ -53,6 +93,12 @@ }; }; +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + &uart1 { /* Rear RS-232 connector */ status = "okay"; @@ -81,6 +127,10 @@ pinctrl-0 = <&pinctrl_rmii1_default>; }; +&i2c1 { + status = "okay"; +}; + &i2c2 { status = "okay"; }; @@ -133,8 +183,77 @@ &i2c12 { status = "okay"; + + max31785@52 { + compatible = "maxim,max31785"; + reg = <0x52>; + }; +}; + +&gpio { + nic_func_mode0 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "nic_func_mode0"; + }; + nic_func_mode1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "nic_func_mode1"; + }; }; &vuart { status = "okay"; }; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@4 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@5 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@6 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts new file mode 100644 index 000000000000..5f9049d2c4c3 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Witherspoon BMC"; + compatible = "ibm,witherspoon-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 14 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 15 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + + rear-power { + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; + }; + + power-button { + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + + iio-hwmon-bmp280 { + compatible = "iio-hwmon"; + io-channels = <&bmp 1>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; + + flash@1 { + status = "okay"; + label = "alt"; + m25p,fast-read; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + bmp: bmp280@77 { + compatible = "bosch,bmp280"; + reg = <0x77>; + #io-channel-cells = <1>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + + +&i2c5 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c9 { + status = "okay"; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c10 { + /* MUX + * -> PCIe Slot 3 + * -> PCIe Slot 4 + */ + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts new file mode 100644 index 000000000000..c881484a85cf --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -0,0 +1,426 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Zaius BMC"; + compatible = "ingrasys,zaius-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + }; + + onewire0 { + compatible = "w1-gpio"; + gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + }; + + onewire1 { + compatible = "w1-gpio"; + gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + }; + + onewire2 { + compatible = "w1-gpio"; + gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + }; + + onewire3 { + compatible = "w1-gpio"; + gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 7)>; + }; + }; + + leds { + compatible = "gpio-leds"; + + sys_boot_status { + label = "System boot status"; + gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>; + }; + + attention { + label = "Attention"; + gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>; + }; + + plt_fault { + label = "Platform fault"; + gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>; + }; + + hdd_fault { + label = "Onboard drive fault"; + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 13>, <&adc 14>, <&adc 15>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2ck_default + &pinctrl_spi2cs0_default + &pinctrl_spi2cs1_default + &pinctrl_spi2miso_default + &pinctrl_spi2mosi_default>; + + flash@0 { + status = "okay"; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; + + /* Power sequencer UCD90160 PMBUS @64h + * FRU AT24C64D @50h + * RTC PCF8523 @68h + * Clock buffer 9DBL04 @6dh + */ +}; + +&i2c1 { + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* MUX1 PCA9546A @71h + * PCIe 0 + * PCIe 1 + * PCIe 2 + * TPM header + */ +}; + +&i2c2 { + status = "disabled"; + + /* OCP Mezz Connector A (OOB SMBUS) */ +}; + +&i2c3 { + status = "disabled"; + + /* OCP Mezz Connector A (PCIe slot SMBUS) */ +}; + +&i2c4 { + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* MUX1 PCA9546A @71h + * PCIe 3 + * PCIe 4 + */ +}; + + +&i2c5 { + status = "disabled"; + + /* CPU0 PRM 0.7V */ + /* CPU0 PRM 1.2V CH03 */ + /* CPU0 PRM 0.8V */ + /* CPU0 PRM 1.2V CH47 */ +}; + +&i2c6 { + status = "disabled"; + + /* CPU1 PRM 0.7V */ + /* CPU1 PRM 1.2V CH03 */ + /* CPU1 PRM 0.8V */ + /* CPU1 PRM 1.2V CH47 */ +}; + +&i2c7 { + status = "okay"; + + pca9541a@70 { + compatible = "nxp,pca9541"; + reg = <0x70>; + + i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + hotswap@54 { + compatible = "ti,lm5066i"; + reg = <0x54>; + }; + }; + }; + + /* Master selector PCA9541A @70h (other master: CPU0) + * LM5066I PMBUS @10h + */ + + /* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */ + power-brick@61 { + compatible = "delta,dps800"; + reg = <0x61>; + }; + + /* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */ + /* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */ + /* CPU0 VR ISL68137 0.8V PMBUS @60h */ + /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */ + /* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */ +}; + +&i2c8 { + status = "okay"; + + /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */ + /* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */ + /* CPU1 VR ISL68137 0.8V PMBUS @61h */ + /* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */ + /* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */ +}; + + +&i2c9 { + status = "disabled"; + + /* Fan board */ +}; + +&i2c10 { + status = "disabled"; +}; + +&i2c11 { + status = "disabled"; + + /* GPU sideband */ +}; + +&i2c12 { + status = "disabled"; +}; + +&i2c13 { + status = "disabled"; + + /* MUX PI3USB102 + * CPU0 debug + * CPU1 debug + */ +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; + + pinctrl_gpioh_unbiased: gpioi_unbiased { + pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7"; + bias-disable; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioh_unbiased>; + + line_iso_u146_en { + gpio-hog; + gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "iso_u164_en"; + }; + + ncsi_mux_en_n { + gpio-hog; + gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "ncsi_mux_en_n"; + }; + + line_bmc_i2c2_sw_rst_n { + gpio-hog; + gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "bmc_i2c2_sw_rst_n"; + }; + + line_bmc_i2c5_sw_rst_n { + gpio-hog; + gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "bmc_i2c5_sw_rst_n"; + }; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts new file mode 100644 index 000000000000..76aa6ea1f988 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Quanta Q71L BMC"; + compatible = "quanta,q71l-bmc", "aspeed,ast2400"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@40000000 { + reg = <0x40000000 0x8000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@47800000 { + no-map; + reg = <0x47800000 0x00800000>; /* 8MB */ + }; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + }; + + power { + gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 11>; + }; + + i2c1mux: i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + /* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */ + i2c-parent = <&i2c1>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default + &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + /* temp2 inlet */ + tmp75@4c { + compatible = "ti,tmp75"; + reg = <0x4c>; + }; + + /* temp3 */ + tmp75@4e { + compatible = "ti,tmp75"; + reg = <0x4e>; + }; + + /* temp1 */ + tmp75@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + + /* Baseboard FRU */ + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + /* FP FRU */ + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; +}; + +&i2c2 { + status = "okay"; + + /* 0: PCIe Slot 2, + * Slot 3, + * Slot 6, + * Slot 7 + */ + i2c-switch@74 { + compatible = "nxp,pca9546"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; /* may use mux@77 next. */ + + i2c_pcie2: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_pcie3: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_pcie6: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_pcie7: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + /* 0: PCIe Slot 1, + * Slot 4, + * Slot 5, + * Slot 8, + * Slot 9, + * Slot 10, + * SSD 1, + * SSD 2 + */ + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; /* may use mux@74 next. */ + + i2c_pcie1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_pcie4: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_pcie5: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_pcie8: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c_pcie9: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c_pcie10: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c_ssd1: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c_ssd2: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c3 { + status = "okay"; + + /* BIOS FRU */ + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; + + /* 0: PSU4 + * PSU1 + * PSU3 + * PSU2 + */ + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c_psu4: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_psu1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_psu3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_psu2: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + /* PDB FRU */ + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&i2c8 { + status = "okay"; + + /* BMC FRU */ + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&vuart { + status = "okay"; +}; + +&wdt2 { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; +}; + +&i2c1mux { + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + /* Memory Riser 1 FRU */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + /* Memory Riser 2 FRU */ + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + /* Memory Riser 3 FRU */ + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + /* Memory Riser 4 FRU */ + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* Memory Riser 5 FRU */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + /* Memory Riser 6 FRU */ + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + /* Memory Riser 7 FRU */ + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + /* Memory Riser 8 FRU */ + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index de08d9045cb8..b0d8431a3700 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -1,5 +1,5 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "skeleton.dtsi" +// SPDX-License-Identifier: GPL-2.0+ +#include <dt-bindings/clock/aspeed-clock.h> / { model = "Aspeed BMC"; @@ -54,6 +54,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-fmc"; + clocks = <&syscon ASPEED_CLK_AHB>; status = "disabled"; interrupts = <19>; flash@0 { @@ -69,6 +70,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; status = "disabled"; flash@0 { reg = < 0 >; @@ -89,6 +91,7 @@ compatible = "aspeed,ast2400-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>; status = "disabled"; }; @@ -96,6 +99,7 @@ compatible = "aspeed,ast2400-mac", "faraday,ftgmac100"; reg = <0x1e680000 0x180>; interrupts = <3>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>; status = "disabled"; }; @@ -106,47 +110,12 @@ ranges; syscon: syscon@1e6e2000 { - compatible = "aspeed,g4-scu", "syscon", "simple-mfd"; + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; #address-cells = <1>; #size-cells = <0>; - - clk_clkin: clk_clkin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <48000000>; - }; - - clk_hpll: clk_hpll@70 { - #clock-cells = <0>; - compatible = "aspeed,g4-hpll-clock", "fixed-clock"; - reg = <0x70>; - clocks = <&clk_clkin>; - clock-frequency = <384000000>; - }; - - clk_ahb: clk_ahb@70 { - #clock-cells = <0>; - compatible = "aspeed,g4-ahb-clock", "fixed-clock"; - reg = <0x70>; - clocks = <&clk_hpll>; - clock-frequency = <192000000>; - }; - - clk_apb: clk_apb@8 { - #clock-cells = <0>; - compatible = "aspeed,g4-apb-clock", "fixed-clock"; - reg = <0x08>; - clocks = <&clk_hpll>; - clock-frequency = <48000000>; - }; - - clk_uart: clk_uart@2c{ - #clock-cells = <0>; - compatible = "aspeed,g4-uart-clock", "fixed-clock"; - reg = <0x2c>; - clock-frequency = <24000000>; - }; + #clock-cells = <1>; + #reset-cells = <1>; pinctrl: pinctrl { compatible = "aspeed,g4-pinctrl"; @@ -156,7 +125,8 @@ adc: adc@1e6e9000 { compatible = "aspeed,ast2400-adc"; reg = <0x1e6e9000 0xb0>; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_ADC>; #io-channel-cells = <1>; status = "disabled"; }; @@ -173,6 +143,7 @@ reg = <0x1e780000 0x1000>; interrupts = <20>; gpio-ranges = <&pinctrl 0 0 220>; + clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; }; @@ -181,7 +152,7 @@ compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; interrupts = <16 17 18 35 36 37 38 39>; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; clock-names = "PCLK"; }; @@ -190,7 +161,7 @@ reg = <0x1e783000 0x20>; reg-shift = <2>; interrupts = <9>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>; no-loopback-test; status = "disabled"; }; @@ -200,7 +171,7 @@ reg = <0x1e784000 0x20>; reg-shift = <2>; interrupts = <10>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>; no-loopback-test; status = "disabled"; }; @@ -208,11 +179,23 @@ wdt1: watchdog@1e785000 { compatible = "aspeed,ast2400-wdt"; reg = <0x1e785000 0x1c>; + clocks = <&syscon ASPEED_CLK_APB>; }; wdt2: watchdog@1e785020 { compatible = "aspeed,ast2400-wdt"; reg = <0x1e785020 0x1c>; + clocks = <&syscon ASPEED_CLK_APB>; + }; + + pwm_tacho: pwm-tacho-controller@1e786000 { + compatible = "aspeed,ast2400-pwm-tacho"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1e786000 0x1000>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_PWM>; + status = "disabled"; }; vuart: serial@1e787000 { @@ -220,17 +203,59 @@ reg = <0x1e787000 0x40>; reg-shift = <2>; interrupts = <8>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_APB>; no-loopback-test; status = "disabled"; }; + lpc: lpc@1e789000 { + compatible = "aspeed,ast2400-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2400-lpc-bmc"; + reg = <0x0 0x80>; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + + lpc_ctrl: lpc-ctrl@0 { + compatible = "aspeed,ast2400-lpc-ctrl"; + reg = <0x0 0x80>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@0 { + compatible = "aspeed,ast2400-lpc-snoop"; + reg = <0x0 0x80>; + interrupts = <8>; + status = "disabled"; + }; + + lhc: lhc@20 { + compatible = "aspeed,ast2400-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + }; + }; + uart2: serial@1e78d000 { compatible = "ns16550a"; reg = <0x1e78d000 0x20>; reg-shift = <2>; interrupts = <32>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>; no-loopback-test; status = "disabled"; }; @@ -240,7 +265,7 @@ reg = <0x1e78e000 0x20>; reg-shift = <2>; interrupts = <33>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>; no-loopback-test; status = "disabled"; }; @@ -250,7 +275,7 @@ reg = <0x1e78f000 0x20>; reg-shift = <2>; interrupts = <34>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>; no-loopback-test; status = "disabled"; }; @@ -281,7 +306,8 @@ reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <0>; interrupt-parent = <&i2c_ic>; @@ -296,7 +322,8 @@ reg = <0x80 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <1>; interrupt-parent = <&i2c_ic>; @@ -311,7 +338,8 @@ reg = <0xc0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <2>; interrupt-parent = <&i2c_ic>; @@ -327,7 +355,8 @@ reg = <0x100 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <3>; interrupt-parent = <&i2c_ic>; @@ -343,7 +372,8 @@ reg = <0x140 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <4>; interrupt-parent = <&i2c_ic>; @@ -359,7 +389,8 @@ reg = <0x180 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <5>; interrupt-parent = <&i2c_ic>; @@ -375,7 +406,8 @@ reg = <0x1c0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <6>; interrupt-parent = <&i2c_ic>; @@ -391,7 +423,8 @@ reg = <0x300 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <7>; interrupt-parent = <&i2c_ic>; @@ -407,7 +440,8 @@ reg = <0x340 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <8>; interrupt-parent = <&i2c_ic>; @@ -423,7 +457,8 @@ reg = <0x380 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <9>; interrupt-parent = <&i2c_ic>; @@ -439,7 +474,8 @@ reg = <0x3c0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <10>; interrupt-parent = <&i2c_ic>; @@ -455,7 +491,8 @@ reg = <0x400 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <11>; interrupt-parent = <&i2c_ic>; @@ -471,7 +508,8 @@ reg = <0x440 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <12>; interrupt-parent = <&i2c_ic>; @@ -487,7 +525,8 @@ reg = <0x480 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <13>; interrupt-parent = <&i2c_ic>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 5c4ecdba3a6b..40de3b66c33f 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -1,5 +1,5 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "skeleton.dtsi" +// SPDX-License-Identifier: GPL-2.0+ +#include <dt-bindings/clock/aspeed-clock.h> / { model = "Aspeed BMC"; @@ -54,6 +54,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-fmc"; + clocks = <&syscon ASPEED_CLK_AHB>; status = "disabled"; interrupts = <19>; flash@0 { @@ -79,6 +80,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; status = "disabled"; flash@0 { reg = < 0 >; @@ -98,6 +100,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; status = "disabled"; flash@0 { reg = < 0 >; @@ -123,6 +126,7 @@ compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>; status = "disabled"; }; @@ -130,6 +134,7 @@ compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e680000 0x180>; interrupts = <3>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>; status = "disabled"; }; @@ -140,55 +145,18 @@ ranges; syscon: syscon@1e6e2000 { - compatible = "aspeed,g5-scu", "syscon", "simple-mfd"; + compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; #address-cells = <1>; #size-cells = <0>; - - clk_clkin: clk_clkin@70 { - #clock-cells = <0>; - compatible = "aspeed,g5-clkin-clock", "fixed-clock"; - reg = <0x70>; - clock-frequency = <24000000>; - }; - - clk_hpll: clk_hpll@24 { - #clock-cells = <0>; - compatible = "aspeed,g5-hpll-clock", "fixed-clock"; - reg = <0x24>; - clocks = <&clk_clkin>; - clock-frequency = <792000000>; - }; - - clk_ahb: clk_ahb@70 { - #clock-cells = <0>; - compatible = "aspeed,g5-ahb-clock", "fixed-clock"; - reg = <0x70>; - clocks = <&clk_hpll>; - clock-frequency = <198000000>; - }; - - clk_apb: clk_apb@8 { - #clock-cells = <0>; - compatible = "aspeed,g5-apb-clock", "fixed-clock"; - reg = <0x08>; - clocks = <&clk_hpll>; - clock-frequency = <24750000>; - }; - - clk_uart: clk_uart@2c { - #clock-cells = <0>; - compatible = "aspeed,uart-clock", "fixed-clock"; - reg = <0x2c>; - clock-frequency = <24000000>; - }; + #clock-cells = <1>; + #reset-cells = <1>; pinctrl: pinctrl { compatible = "aspeed,g5-pinctrl"; aspeed,external-nodes = <&gfx &lhc>; }; - }; gfx: display@1e6e6000 { @@ -200,7 +168,8 @@ adc: adc@1e6e9000 { compatible = "aspeed,ast2500-adc"; reg = <0x1e6e9000 0xb0>; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_ADC>; #io-channel-cells = <1>; status = "disabled"; }; @@ -217,6 +186,7 @@ reg = <0x1e780000 0x1000>; interrupts = <20>; gpio-ranges = <&pinctrl 0 0 220>; + clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; }; @@ -225,7 +195,7 @@ compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; interrupts = <16 17 18 35 36 37 38 39>; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; clock-names = "PCLK"; }; @@ -234,7 +204,7 @@ reg = <0x1e783000 0x20>; reg-shift = <2>; interrupts = <9>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>; no-loopback-test; status = "disabled"; }; @@ -244,7 +214,7 @@ reg = <0x1e784000 0x20>; reg-shift = <2>; interrupts = <10>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>; no-loopback-test; status = "disabled"; }; @@ -252,16 +222,39 @@ wdt1: watchdog@1e785000 { compatible = "aspeed,ast2500-wdt"; reg = <0x1e785000 0x20>; + clocks = <&syscon ASPEED_CLK_APB>; }; wdt2: watchdog@1e785020 { compatible = "aspeed,ast2500-wdt"; reg = <0x1e785020 0x20>; + clocks = <&syscon ASPEED_CLK_APB>; }; wdt3: watchdog@1e785040 { compatible = "aspeed,ast2500-wdt"; reg = <0x1e785040 0x20>; + clocks = <&syscon ASPEED_CLK_APB>; + status = "disabled"; + }; + + pwm_tacho: pwm-tacho-controller@1e786000 { + compatible = "aspeed,ast2500-pwm-tacho"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1e786000 0x1000>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_PWM>; + status = "disabled"; + }; + + vuart: serial@1e787000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e787000 0x40>; + reg-shift = <2>; + interrupts = <8>; + clocks = <&syscon ASPEED_CLK_APB>; + no-loopback-test; status = "disabled"; }; @@ -288,6 +281,19 @@ reg-io-width = <4>; + lpc_ctrl: lpc-ctrl@0 { + compatible = "aspeed,ast2500-lpc-ctrl"; + reg = <0x0 0x80>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@0 { + compatible = "aspeed,ast2500-lpc-snoop"; + reg = <0x0 0x80>; + interrupts = <8>; + status = "disabled"; + }; + lhc: lhc@20 { compatible = "aspeed,ast2500-lhc"; reg = <0x20 0x24 0x48 0x8>; @@ -295,22 +301,12 @@ }; }; - vuart: serial@1e787000 { - compatible = "aspeed,ast2500-vuart"; - reg = <0x1e787000 0x40>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; - uart2: serial@1e78d000 { compatible = "ns16550a"; reg = <0x1e78d000 0x20>; reg-shift = <2>; interrupts = <32>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>; no-loopback-test; status = "disabled"; }; @@ -320,7 +316,7 @@ reg = <0x1e78e000 0x20>; reg-shift = <2>; interrupts = <33>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>; no-loopback-test; status = "disabled"; }; @@ -330,7 +326,7 @@ reg = <0x1e78f000 0x20>; reg-shift = <2>; interrupts = <34>; - clocks = <&clk_uart>; + clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>; no-loopback-test; status = "disabled"; }; @@ -361,7 +357,8 @@ reg = <0x40 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <0>; interrupt-parent = <&i2c_ic>; @@ -376,7 +373,8 @@ reg = <0x80 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <1>; interrupt-parent = <&i2c_ic>; @@ -391,7 +389,8 @@ reg = <0xc0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <2>; interrupt-parent = <&i2c_ic>; @@ -407,7 +406,8 @@ reg = <0x100 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <3>; interrupt-parent = <&i2c_ic>; @@ -423,7 +423,8 @@ reg = <0x140 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <4>; interrupt-parent = <&i2c_ic>; @@ -439,7 +440,8 @@ reg = <0x180 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <5>; interrupt-parent = <&i2c_ic>; @@ -455,7 +457,8 @@ reg = <0x1c0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <6>; interrupt-parent = <&i2c_ic>; @@ -471,7 +474,8 @@ reg = <0x300 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <7>; interrupt-parent = <&i2c_ic>; @@ -487,7 +491,8 @@ reg = <0x340 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <8>; interrupt-parent = <&i2c_ic>; @@ -503,7 +508,8 @@ reg = <0x380 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <9>; interrupt-parent = <&i2c_ic>; @@ -519,7 +525,8 @@ reg = <0x3c0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <10>; interrupt-parent = <&i2c_ic>; @@ -535,7 +542,8 @@ reg = <0x400 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <11>; interrupt-parent = <&i2c_ic>; @@ -551,7 +559,8 @@ reg = <0x440 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <12>; interrupt-parent = <&i2c_ic>; @@ -567,7 +576,8 @@ reg = <0x480 0x40>; compatible = "aspeed,ast2500-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <13>; interrupt-parent = <&i2c_ic>; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index 1c86537a42a0..e3e14b7e25aa 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -58,6 +58,18 @@ }; }; + tcb0: timer@f8008000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + i2c0: i2c@f8010000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts index f877f3430bcc..7a34c4dc05d2 100644 --- a/arch/arm/boot/dts/at91-ariettag25.dts +++ b/arch/arm/boot/dts/at91-ariettag25.dts @@ -46,6 +46,18 @@ }; }; + tcb0: timer@f8008000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + usb2: gadget@f803c000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index 89cde175154e..295a5a43fe01 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -37,6 +37,18 @@ ahb { apb { + tcb0: timer@f8008000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + mmc0: mmc@f0008000 { pinctrl-0 = < &pinctrl_board_mmc0 diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index 50d5e719b451..d413e2d9abdf 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -34,6 +34,18 @@ ahb { apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usb1: gadget@fffa4000 { atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 1f31df846d61..1003846679c1 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -31,6 +31,18 @@ ahb { apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + macb0: ethernet@fffc4000 { phy-mode = "mii"; pinctrl-0 = <&pinctrl_macb_rmii diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts index ec6c28c521a5..30041e8f12d5 100644 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -94,6 +94,18 @@ }; }; + tcb0: timer@f0010000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + usart0: serial@f001c000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index fe1bc0a59a98..15b0746e44e2 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -34,6 +34,18 @@ ahb { apb { + tcb0: timer@f8008000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + usart0: serial@f801c000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi index 87e5090fb4c4..c7b964e25321 100644 --- a/arch/arm/boot/dts/at91-linea.dtsi +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -27,6 +27,18 @@ clock-frequency = <12000000>; }; +&tcb0 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/at91-natte.dtsi new file mode 100644 index 000000000000..49f0a0c46cde --- /dev/null +++ b/arch/arm/boot/dts/at91-natte.dtsi @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * at91-natte.dts - Device Tree include file for the Natte board + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin <peda@axentia.se> + */ + +/ { + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>, + <&ioexp 1 GPIO_ACTIVE_HIGH>, + <&ioexp 2 GPIO_ACTIVE_HIGH>; + }; + + batntc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 5>; + io-channel-names = "parent"; + mux-controls = <&mux>; + + channels = + "batntc0", "batntc1", "batntc2", "batntc3", + "batntc4", "batntc5", "batntc6", "batntc7"; + }; + + batv-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 6>; + io-channel-names = "parent"; + mux-controls = <&mux>; + + channels = + "batv0", "batv1", "batv2", "batv3", + "batv4", "batv5", "batv6", "batv7"; + }; + + iout-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 7>; + io-channel-names = "parent"; + mux-controls = <&mux>; + + channels = + "iout0", "iout1", "iout2", "iout3", + "iout4", "iout5", "iout6", "iout7"; + }; + + i2c-mux { + compatible = "i2c-mux"; + mux-locked; + i2c-parent = <&i2c0>; + mux-controls = <&mux>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + + ti,charge-current = <2000>; + ti,charge-voltage = <16800>; + + poll-interval = <20000>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + + ioexp: ioexp@20 { + #gpio-cells = <2>; + compatible = "semtech,sx1502q"; + reg = <0x20>; + + gpio-controller; + ngpios = <8>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio3_cfg_pins>; + + gpio3_cfg_pins: gpio3_cfg { + pins = "gpio3"; + bias-pull-up; + }; + }; + + adc: adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <2>; + ti,datarate = <4>; + }; + + channel@5 { + reg = <5>; + ti,gain = <2>; + ti,datarate = <4>; + }; + + channel@6 { + reg = <6>; + ti,gain = <1>; + ti,datarate = <4>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts new file mode 100644 index 000000000000..3ea1d26e1c68 --- /dev/null +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin <peda@axentia.se> + */ +/dts-v1/; +#include "at91-linea.dtsi" +#include "sama5d3_lcd.dtsi" +#include "at91-natte.dtsi" + +/ { + model = "Axentia Linea-Nattis v2 Natte v2"; + compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + pinctrl@fffff200 { + nattis { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOD 28 + AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOD 5 + AT91_PERIPH_GPIO + AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_lcd_prlud0: lcd_prlud0 { + atmel,pins = + <AT91_PIOA 21 + AT91_PERIPH_GPIO + AT91_PINCTRL_OUTPUT_VAL(0)>; + }; + + pinctrl_lcd_hipow0: lcd_hipow0 { + atmel,pins = + <AT91_PIOA 23 + AT91_PERIPH_GPIO + AT91_PINCTRL_OUTPUT_VAL(0)>; + }; + }; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + wakeup { + label = "Wakeup"; + linux,code = <10>; + gpio-key,wakeup; + gpios = <&pioB 27 GPIO_ACTIVE_LOW>; + }; + }; + + panel_reg: panel-regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-VCC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + bl_reg: backlight-regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-VDD"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + panel_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 100000 0>; + + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <40>; + + power-supply = <&bl_reg>; + enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + }; + + panel: panel { + compatible = "sharp,lq150x1lg11"; + backlight = <&panel_bl>; + power-supply = <&panel_reg>; + + port { + panel_input: endpoint { + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "nattis-tfa9879"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,widgets = "Line", "Line Out Jack"; + simple-audio-card,routing = "Line Out Jack", "LINEOUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssc0>; + }; + + simple-audio-card,codec { + sound-dai = <&>; + }; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <100000>; + + temp@18 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x18>; + smbus-timeout-disable; + }; + + eeprom@50 { + compatible = "nxp,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + amp: amplifier@6c { + compatible = "nxp,tfa9879"; + reg = <0x6c>; + #sound-dai-cells = <0>; + }; +}; + +&ssc0 { + status = "okay"; + + atmel,clk-from-rk-pin; + #sound-dai-cells = <0>; +}; + +&hlcdc { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base + &pinctrl_lcd_rgb565 + &pinctrl_lcd_prlud0 + &pinctrl_lcd_hipow0>; + + port@0 { + hlcdc_panel_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; +}; + +&mmc0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 + &pinctrl_mmc0_dat1_3 + &pinctrl_mmc0_cd>; + + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&usart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + atmel,use-dma-rx; +}; + +&nand { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; +}; + +&dbgu { + status = "okay"; + + atmel,use-dma-rx; +}; + +&usb0 { + status = "okay"; + + atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; +}; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index f46352790a41..72e9148ca096 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -31,6 +31,18 @@ ahb { apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usb1: gadget@fffa4000 { atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts index 171243ca4f2f..70cb36f7a9d7 100644 --- a/arch/arm/boot/dts/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts @@ -32,6 +32,18 @@ ahb { apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + mmc0: mmc@fffa8000 { pinctrl-0 = < &pinctrl_board_mmc0 diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 6d87b4eb6c41..e86e0c00eb6b 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -119,6 +119,18 @@ status = "okay"; }; + tcb0: timer@f800c000 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + uart1: serial@f8020000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts new file mode 100644 index 000000000000..e603a267bdf1 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board + * + * Copyright (C) 2017 Microchip/Atmel, + * 2017 Wenyou Yang <wenyou.yang@microchip.com> + * 2017 Ludovic Desroches <ludovic.desroches@microchip.com> + */ +/dts-v1/; +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Atmel SAMA5D2 PTC EK"; + compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <24000000>; + }; + }; + + ahb { + usb0: gadget@300000 { + atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@400000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioA PIN_PB12 GPIO_ACTIVE_HIGH + 0 + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; + }; + + usb2: ehci@500000 { + status = "okay"; + }; + + ebi: ebi@10000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand_default>; + status = "okay"; /* conflicts with sdmmc1 and qspi0 */ + + nand_controller: nand-controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenv@0x100000 { + label = "bootloader env"; + reg = <0x100000 0x40000>; + }; + + bootloaderenvred@0x140000 { + label = "bootloader env redundant"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; + }; + }; + + sdmmc0: sdio-host@a0000000 { + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + non-removable; + mmc-ddr-1_8v; + status = "okay"; + }; + + apb { + spi0: spi@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; + status = "okay"; + }; + + macb0: ethernet@f8008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; + phy-mode = "rmii"; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioA>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + tcb0: timer@f800c000 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + + uart0: serial@f801c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; + + uart2: serial@f8024000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; + + i2c0: i2c@f8028000 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + status = "okay"; + }; + + flx0: flexcom@f8034000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <0>, <0>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <16>; + status = "okay"; + }; + }; + + shdwc@f8048010 { + atmel,shdwc-debouncer = <976>; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; + }; + + watchdog@f8048040 { + status = "okay"; + }; + + spi1: spi@fc000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + status = "okay"; + }; + + i2c1: i2c@fc028000 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "okay"; + + at24@50 { + compatible = "24c02"; + reg = <0x50>; + pagesize = <8>; + }; + }; + + pinctrl@fc038000 { + pinctrl_flx0_default: flx0_default { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, + <PIN_PB29__FLEXCOM0_IO1>; + bias-disable; + }; + + pinctrl_i2c0_default: i2c0_default { + pinmux = <PIN_PD21__TWD0>, + <PIN_PD22__TWCK0>; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = <PIN_PC6__TWD1>, + <PIN_PC7__TWCK1>; + bias-disable; + }; + + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PA10__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PB6__GPIO>, + <PIN_PB8__GPIO>, + <PIN_PB10__GPIO>; + bias-pull-up; + }; + + pinctrl_macb0_default: macb0_default { + pinmux = <PIN_PB14__GTXCK>, + <PIN_PB15__GTXEN>, + <PIN_PB16__GRXDV>, + <PIN_PB17__GRXER>, + <PIN_PB18__GRX0>, + <PIN_PB19__GRX1>, + <PIN_PB20__GTX0>, + <PIN_PB21__GTX1>, + <PIN_PB22__GMDC>, + <PIN_PB23__GMDIO>; + bias-disable; + }; + + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = <PIN_PB24__GPIO>; + bias-disable; + }; + + pinctrl_nand_default: nand_default { + re_we_data { + pinmux = <PIN_PA22__D0>, + <PIN_PA23__D1>, + <PIN_PA24__D2>, + <PIN_PA25__D3>, + <PIN_PA26__D4>, + <PIN_PA27__D5>, + <PIN_PA28__D6>, + <PIN_PA29__D7>, + <PIN_PA30__NWE_NANDWE>, + <PIN_PB2__NRD_NANDOE>; + bias-pull-up; + }; + + ale_cle_rdy_cs { + pinmux = <PIN_PB0__A21_NANDALE>, + <PIN_PB1__A22_NANDCLE>, + <PIN_PC8__NANDRDY>, + <PIN_PA31__NCS3>; + bias-pull-up; + }; + }; + + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = <PIN_PA1__SDMMC0_CMD>, + <PIN_PA2__SDMMC0_DAT0>, + <PIN_PA3__SDMMC0_DAT1>, + <PIN_PA4__SDMMC0_DAT2>, + <PIN_PA5__SDMMC0_DAT3>, + <PIN_PA6__SDMMC0_DAT4>, + <PIN_PA7__SDMMC0_DAT5>, + <PIN_PA8__SDMMC0_DAT6>, + <PIN_PA9__SDMMC0_DAT7>; + bias-pull-up; + }; + + ck_cd_vddsel { + pinmux = <PIN_PA0__SDMMC0_CK>, + <PIN_PA11__SDMMC0_VDDSEL>, + <PIN_PA13__SDMMC0_CD>; + bias-disable; + }; + }; + + pinctrl_spi0_default: spi0_default { + pinmux = <PIN_PA14__SPI0_SPCK>, + <PIN_PA15__SPI0_MOSI>, + <PIN_PA16__SPI0_MISO>, + <PIN_PA17__SPI0_NPCS0>; + bias-disable; + }; + + pinctrl_spi1_default: spi1_default { + pinmux = <PIN_PC1__SPI1_SPCK>, + <PIN_PC2__SPI1_MOSI>, + <PIN_PC3__SPI1_MISO>, + <PIN_PC4__SPI1_NPCS0>; + bias-disable; + }; + + pinctrl_uart0_default: uart0_default { + pinmux = <PIN_PB26__URXD0>, + <PIN_PB27__UTXD0>; + bias-disable; + }; + + pinctrl_uart2_default: uart2_default { + pinmux = <PIN_PD23__URXD2>, + <PIN_PD24__UTXD2>; + bias-disable; + }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PB12__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PB11__GPIO>; + bias-disable; + }; + + }; + + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + bp1 { + label = "PB_USER"; + gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + red { + label = "red"; + gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "green"; + gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "blue"; + gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 56de21de2779..e4bbb7e0f793 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -133,6 +133,18 @@ }; }; + tcb0: timer@f800c000 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + pdmic@f8018000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pdmic_default>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 40879aded680..02c1d2958d78 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -65,6 +65,18 @@ status = "okay"; }; + tcb0: timer@f0010000 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + i2c0: i2c@f0014000 { pinctrl-0 = <&pinctrl_i2c0_pu>; status = "okay"; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index b813fdfa2842..d3e79fbf1944 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -89,6 +89,18 @@ }; }; + tcb2: timer@fc024000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + adc0: adc@fc034000 { pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 29ab17a97f9a..4b7c762d5f22 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -130,6 +130,18 @@ status = "okay"; }; + tcb2: timer@fc024000 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + adc0: adc@fc034000 { pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 5b7ee92e32a7..7887a7160a54 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -174,6 +174,18 @@ status = "okay"; }; + tcb2: timer@fc024000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + watchdog@fc068640 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 9f6005708ea8..1be9889a2b3a 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -151,6 +151,18 @@ status = "okay"; }; + tcb2: timer@fc024000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + macb1: ethernet@fc028000 { phy-mode = "rmii"; status = "okay"; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index da622bf45b4a..ba61893a02a0 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -375,7 +375,9 @@ }; tcb0: timer@fffa0000 { - compatible = "atmel,at91rm9200-tcb"; + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfffa0000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 @@ -385,7 +387,9 @@ }; tcb1: timer@fffa4000 { - compatible = "atmel,at91rm9200-tcb"; + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfffa4000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 21 IRQ_TYPE_LEVEL_HIGH 0 diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 33192d0cefee..81aaf8151c76 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -32,6 +32,18 @@ ahb { apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usb1: gadget@fffb0000 { atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index bc655e7332d6..655f06cd716a 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -386,7 +386,9 @@ }; tcb0: timer@fffa0000 { - compatible = "atmel,at91rm9200-tcb"; + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfffa0000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 @@ -396,7 +398,9 @@ }; tcb1: timer@fffdc000 { - compatible = "atmel,at91rm9200-tcb"; + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfffdc000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH 0 diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index b2578feceb08..e16c706d91ef 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -69,6 +69,18 @@ ahb { apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usb1: gadget@fffa4000 { atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 66876019101d..ddfc63b8fd4e 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -80,7 +80,7 @@ status = "disabled"; }; - fb0: fb@0x00600000 { + fb0: fb@600000 { compatible = "atmel,at91sam9261-lcdc"; reg = <0x00600000 0x1000>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; @@ -125,7 +125,9 @@ ranges; tcb0: timer@fffa0000 { - compatible = "atmel,at91rm9200-tcb"; + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfffa0000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>, <18 IRQ_TYPE_LEVEL_HIGH 0>, diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 960d6940ebf6..a29fc0494076 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -15,6 +15,14 @@ chosen { bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; stdout-path = "serial0:115200n8"; + + clocksource { + timer = <&timer0>; + }; + + clockevent { + timer = <&timer1>; + }; }; memory { @@ -36,7 +44,7 @@ status = "okay"; }; - fb0: fb@0x00600000 { + fb0: fb@600000 { display = <&display0>; atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>; status = "okay"; @@ -125,6 +133,18 @@ }; apb { + tcb0: timer@fffa0000 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer1: timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usb1: gadget@fffa4000 { atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index e54f14d36b6f..f2405671e3bd 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -389,7 +389,9 @@ }; tcb0: timer@fff7c000 { - compatible = "atmel,at91rm9200-tcb"; + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfff7c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb_clk>, <&slow_xtal>; @@ -999,7 +1001,7 @@ }; }; - fb0: fb@0x00700000 { + fb0: fb@700000 { compatible = "atmel,at91sam9263-lcdc"; reg = <0x00700000 0x1000>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 5a2e1af793f5..e9a7c70830a8 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -37,6 +37,18 @@ status = "okay"; }; + tcb0: timer@fff7c000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usart0: serial@fff8c000 { pinctrl-0 = < &pinctrl_usart0 @@ -95,7 +107,7 @@ }; }; - fb0: fb@0x00700000 { + fb0: fb@700000 { display = <&display0>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index ac9a1511e239..50561b7b7939 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -51,6 +51,18 @@ status = "okay"; }; + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usart0: serial@fffb0000 { pinctrl-0 = <&pinctrl_usart0 diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 91a71774472e..31fecc2cdaf9 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -25,7 +25,7 @@ }; i2c0: i2c@f8010000 { - ov2640: camera@0x30 { + ov2640: camera@30 { compatible = "ovti,ov2640"; reg = <0x30>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 2b127ca7aaa0..3a30eec7f508 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -415,7 +415,9 @@ }; tcb0: timer@fff7c000 { - compatible = "atmel,at91rm9200-tcb"; + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfff7c000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; @@ -423,7 +425,9 @@ }; tcb1: timer@fffd4000 { - compatible = "atmel,at91rm9200-tcb"; + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfffd4000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; @@ -1302,7 +1306,7 @@ }; }; - fb0: fb@0x00500000 { + fb0: fb@500000 { compatible = "atmel,at91sam9g45-lcdc"; reg = <0x00500000 0x1000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index e922552a04cb..25888339d8de 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -39,6 +39,18 @@ status = "okay"; }; + tcb0: timer@fff7c000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usart1: serial@fff90000 { pinctrl-0 = <&pinctrl_usart1 @@ -220,7 +232,7 @@ }; }; - fb0: fb@0x00500000 { + fb0: fb@500000 { display = <&display0>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index e0ac824e0785..4b62f4f963f6 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -446,7 +446,9 @@ }; tcb0: timer@f8008000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb_clk>, <&clk32k>; @@ -454,7 +456,9 @@ }; tcb1: timer@f800c000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb_clk>, <&clk32k>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 212562aedf5e..c43095c5cb5c 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -42,6 +42,18 @@ status = "okay"; }; + tcb0: timer@f8008000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + i2c0: i2c@f8010000 { status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 52f0e9ef8f67..3cae687dccbd 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -124,7 +124,9 @@ ranges; tcb0: timer@fffa0000 { - compatible = "atmel,at91rm9200-tcb"; + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfffa0000 0x100>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>, <17 IRQ_TYPE_LEVEL_HIGH 0>, diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index ea6ed98960c9..4bde9f245e61 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -124,6 +124,18 @@ }; apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + mmc0: mmc@fffa4000 { pinctrl-0 = < &pinctrl_board_mmc0 diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index ad779a7dfefd..fee4fe51a97e 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -433,7 +433,9 @@ }; tcb0: timer@f8008000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb0_clk>, <&clk32k>; @@ -441,7 +443,9 @@ }; tcb1: timer@f800c000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb0_clk>, <&clk32k>; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index bdeaa0b64a5b..4908ee07e628 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -24,6 +24,18 @@ ahb { apb { + tcb0: timer@f8008000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + pinctrl@fffff400 { 1wire_cm { pinctrl_1wire_cm: 1wire_cm-0 { diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index 73b761f850c5..fd55b896afa1 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -48,6 +48,22 @@ interrupt-controller; #interrupt-cells = <1>; + axp_gpio: axp-gpio { + compatible = "x-powers,axp813-gpio"; + gpio-controller; + #gpio-cells = <2>; + + gpio0_ldo: gpio0-ldo { + pins = "GPIO0"; + function = "ldo"; + }; + + gpio1_ldo: gpio1-ldo { + pins = "GPIO1"; + function = "ldo"; + }; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <3000>; @@ -113,11 +129,15 @@ }; reg_ldo_io0: ldo-io0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_ldo>; /* Disable by default to avoid conflicts with GPIO */ status = "disabled"; }; reg_ldo_io1: ldo-io1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_ldo>; /* Disable by default to avoid conflicts with GPIO */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index f81ae0a10310..aa1fc7babfea 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -10,12 +10,12 @@ leds { act { - gpios = <&gpio 47 0>; + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; pwr { label = "PWR"; - gpios = <&gpio 35 0>; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; linux,default-trigger = "default-on"; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 7a960a048204..425f6b0a5ef8 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -10,7 +10,7 @@ leds { act { - gpios = <&gpio 16 1>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 0161a8483e39..effa195e7895 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -11,12 +11,12 @@ leds { act { - gpios = <&gpio 47 0>; + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; pwr { label = "PWR"; - gpios = <&gpio 35 0>; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; linux,default-trigger = "default-on"; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 4bc70efe43d6..772ec3b48231 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -11,7 +11,7 @@ leds { act { - gpios = <&gpio 16 1>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index cca4a75a5651..434483d6fc14 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -11,7 +11,7 @@ leds { act { - gpios = <&gpio 16 1>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 6669355fd655..5c339adabdf0 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -15,12 +15,12 @@ leds { act { - gpios = <&gpio 47 0>; + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; pwr { label = "PWR"; - gpios = <&gpio 35 0>; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; linux,default-trigger = "default-on"; }; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index a8844d033b3f..3e4ed7c5b0b3 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -20,7 +20,7 @@ leds { act { - gpios = <&gpio 47 0>; + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index c4671af0a28d..f80525a290bb 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -337,3 +337,33 @@ clock-frequency = <20000000>; }; }; + +&prcm { + default_cm: default_cm@500 { + compatible = "ti,omap4-cm"; + reg = <0x500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x500 0x100>; + + default_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x5c>; + #clock-cells = <2>; + }; + }; + + alwon_cm: alwon_cm@1400 { + compatible = "ti,omap4-cm"; + reg = <0x1400 0x300>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1400 0x300>; + + alwon_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x228>; + #clock-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 681f5487406e..601c57afd4fe 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -250,6 +250,8 @@ interrupts = <67>; ti,hwmods = "timer1"; ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; }; uart1: uart@20000 { @@ -287,6 +289,8 @@ reg = <0x40000 0x2000>; interrupts = <68>; ti,hwmods = "timer2"; + clocks = <&timer2_fck>; + clock-names = "fck"; }; timer3: timer@42000 { diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/dm816x-clocks.dtsi index 51865eb84a80..1efd4e23e50d 100644 --- a/arch/arm/boot/dts/dm816x-clocks.dtsi +++ b/arch/arm/boot/dts/dm816x-clocks.dtsi @@ -248,3 +248,33 @@ reg = <0x03a8>; }; }; + +&prcm { + default_cm: default_cm@500 { + compatible = "ti,omap4-cm"; + reg = <0x500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x500 0x100>; + + default_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x5c>; + #clock-cells = <2>; + }; + }; + + alwon_cm: alwon_cm@1400 { + compatible = "ti,omap4-cm"; + reg = <0x1400 0x300>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1400 0x300>; + + alwon_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x208>; + #clock-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 566b2a8c8b96..1edc2b48b254 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -67,8 +67,11 @@ ranges; prcm: prcm@48180000 { - compatible = "ti,dm816-prcm"; + compatible = "ti,dm816-prcm", "simple-bus"; reg = <0x48180000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48180000 0x4000>; prcm_clocks: clocks { #address-cells = <1>; @@ -331,6 +334,8 @@ interrupts = <67>; ti,hwmods = "timer1"; ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; }; timer2: timer@48040000 { @@ -338,6 +343,8 @@ reg = <0x48040000 0x2000>; interrupts = <68>; ti,hwmods = "timer2"; + clocks = <&timer2_fck>; + clock-names = "fck"; }; timer3: timer@48042000 { diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index 155eb32ee213..fee0547f7302 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -74,19 +74,19 @@ label = "X-Loader"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x80000 0x1c0000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x240000 0x40000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x780000 0xf880000>; }; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index e088bb93636a..05a7b1a01bc3 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -204,7 +204,7 @@ &atl { assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_gfclk_mux>, + <&atl_clkctrl DRA7_ATL_CLKCTRL 26>, <&dpll_abe_ck>, <&dpll_abe_m2x2_ck>, <&atl_clkin2_ck>; @@ -222,7 +222,7 @@ &mcasp3 { #sound-dai-cells = <0>; - assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&atl_clkin2_ck>; status = "okay"; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index ef9c90daa74b..a7385c338ee9 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -361,7 +361,7 @@ }; &cpu0 { - cpu0-supply = <&smps123_reg>; + vdd-supply = <&smps123_reg>; }; &omap_dwc3_2 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index ac9216293b7c..e4a420f16800 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -7,8 +7,11 @@ * Based on "omap4.dtsi" */ +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/dra7.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/dra.h> +#include <dt-bindings/clock/dra7.h> #define MAX_SOURCES 400 @@ -92,6 +95,8 @@ cooling-min-level = <0>; cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ + + vbb-supply = <&abb_mpu>; }; }; @@ -101,16 +106,26 @@ opp_nom-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1060000 850000 1150000>; + opp-microvolt = <1060000 850000 1150000>, + <1060000 850000 1150000>; opp-supported-hw = <0xFF 0x01>; opp-suspend; }; opp_od-1176000000 { opp-hz = /bits/ 64 <1176000000>; - opp-microvolt = <1160000 885000 1160000>; + opp-microvolt = <1160000 885000 1160000>, + <1160000 885000 1160000>; + opp-supported-hw = <0xFF 0x02>; }; + + opp_high@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1210000 950000 1250000>, + <1210000 950000 1250000>; + opp-supported-hw = <0xFF 0x04>; + }; }; /* @@ -224,8 +239,12 @@ }; cm_core_aon: cm_core_aon@5000 { - compatible = "ti,dra7-cm-core-aon"; + compatible = "ti,dra7-cm-core-aon", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x5000 0x2000>; + ranges = <0 0x5000 0x2000>; cm_core_aon_clocks: clocks { #address-cells = <1>; @@ -237,8 +256,11 @@ }; cm_core: cm_core@8000 { - compatible = "ti,dra7-cm-core"; + compatible = "ti,dra7-cm-core", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x8000 0x3000>; + ranges = <0 0x8000 0x3000>; cm_core_clocks: clocks { #address-cells = <1>; @@ -263,9 +285,12 @@ }; prm: prm@6000 { - compatible = "ti,dra7-prm"; + compatible = "ti,dra7-prm", "simple-bus"; reg = <0x6000 0x3000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x6000 0x3000>; prm_clocks: clocks { #address-cells = <1>; @@ -293,7 +318,6 @@ * node and enable pcie1_ep mode. */ pcie1_rc: pcie@51000000 { - compatible = "ti,dra7-pcie"; reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 232 0x4>, <0 233 0x4>; @@ -323,7 +347,6 @@ }; pcie1_ep: pcie_ep@51000000 { - compatible = "ti,dra7-pcie-ep"; reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>; reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; interrupts = <0 232 0x4>; @@ -345,8 +368,7 @@ ranges = <0x51800000 0x51800000 0x3000 0x0 0x30000000 0x10000000>; status = "disabled"; - pcie@51800000 { - compatible = "ti,dra7-pcie"; + pcie2_rc: pcie@51800000 { reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 355 0x4>, <0 356 0x4>; @@ -876,6 +898,8 @@ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer1"; ti,timer-alwon; + clock-names = "fck"; + clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>; }; timer2: timer@48032000 { @@ -1358,7 +1382,7 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "qspi"; - clocks = <&qspi_gfclk_div>; + clocks = <&l4per_clkctrl DRA7_QSPI_CLKCTRL 25>; clock-names = "fck"; num-cs = <4>; interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; @@ -1373,14 +1397,15 @@ ranges; reg = <0x4a090000 0x20>; ti,hwmods = "ocp2scp3"; - sata_phy: phy@4A096000 { + sata_phy: phy@4a096000 { compatible = "ti,phy-pipe3-sata"; reg = <0x4A096000 0x80>, /* phy_rx */ <0x4A096400 0x64>, /* phy_tx */ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; syscon-phy-power = <&scm_conf 0x374>; - clocks = <&sys_clkin1>, <&sata_ref_clk>; + clocks = <&sys_clkin1>, + <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>; clock-names = "sysclk", "refclk"; syscon-pllreset = <&scm_conf 0x3fc>; #phy-cells = <0>; @@ -1395,9 +1420,9 @@ syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, - <&optfclk_pciephy1_32khz>, - <&optfclk_pciephy1_clk>, - <&optfclk_pciephy1_div_clk>, + <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 8>, + <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 9>, + <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 10>, <&optfclk_pciephy_div>, <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", @@ -1415,9 +1440,9 @@ syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, - <&optfclk_pciephy2_32khz>, - <&optfclk_pciephy2_clk>, - <&optfclk_pciephy2_div_clk>, + <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 8>, + <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 9>, + <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 10>, <&optfclk_pciephy_div>, <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", @@ -1434,7 +1459,7 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; phys = <&sata_phy>; phy-names = "sata-phy"; - clocks = <&sata_ref_clk>; + clocks = <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>; ti,hwmods = "sata"; ports-implemented = <0x1>; }; @@ -1462,7 +1487,7 @@ reg = <0x4a084000 0x400>; syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, - <&usb_otg_ss1_refclk960m>; + <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; @@ -1474,7 +1499,7 @@ reg = <0x4a085000 0x400>; syscon-phy-power = <&scm_conf 0xe74>; clocks = <&usb_phy2_always_on_clk32k>, - <&usb_otg_ss2_refclk960m>; + <&l3init_clkctrl DRA7_USB_OTG_SS2_CLKCTRL 8>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; @@ -1489,7 +1514,7 @@ syscon-phy-power = <&scm_conf 0x370>; clocks = <&usb_phy3_always_on_clk32k>, <&sys_clkin1>, - <&usb_otg_ss1_refclk960m>; + <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>; clock-names = "wkupclk", "sysclk", "refclk"; @@ -1498,11 +1523,17 @@ }; target-module@4a0dd000 { - compatible = "ti,sysc-omap4-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_core"; - reg = <0x4a0dd000 0x4>, - <0x4a0dd008 0x4>; - reg-names = "rev", "sysc"; + reg = <0x4a0dd038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_CORE_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x4a0dd000 0x001000>; @@ -1511,11 +1542,17 @@ }; target-module@4a0d9000 { - compatible = "ti,sysc-omap4-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_mpu"; - reg = <0x4a0d9000 0x4>, - <0x4a0d9008 0x4>; - reg-names = "rev", "sysc"; + reg = <0x4a0d9038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_MPU_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x4a0d9000 0x001000>; @@ -1547,6 +1584,7 @@ dr_mode = "otg"; snps,dis_u3_susphy_quirk; snps,dis_u2_susphy_quirk; + snps,dis_metastability_quirk; }; }; @@ -1636,7 +1674,7 @@ ti,hwmods = "atl"; ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, <&atl_clkin2_ck>, <&atl_clkin3_ck>; - clocks = <&atl_gfclk_mux>; + clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; clock-names = "fck"; status = "disabled"; }; @@ -1652,8 +1690,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; dma-names = "tx", "rx"; - clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>, - <&mcasp1_ahclkr_mux>; + clocks = <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 22>, <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 24>, + <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; }; @@ -1669,8 +1707,9 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; dma-names = "tx", "rx"; - clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>, - <&mcasp2_ahclkr_mux>; + clocks = <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 22>, + <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 24>, + <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; }; @@ -1686,7 +1725,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; - clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>; + clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 22>, + <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; }; @@ -1702,7 +1742,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; dma-names = "tx", "rx"; - clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>; + clocks = <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 22>, + <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; }; @@ -1718,7 +1759,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; dma-names = "tx", "rx"; - clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>; + clocks = <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 22>, + <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; }; @@ -1734,7 +1776,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; dma-names = "tx", "rx"; - clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>; + clocks = <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 22>, + <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; }; @@ -1750,7 +1793,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; dma-names = "tx", "rx"; - clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>; + clocks = <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 22>, + <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; }; @@ -1766,7 +1810,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; dma-names = "tx", "rx"; - clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>; + clocks = <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 22>, + <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; }; @@ -1788,7 +1833,7 @@ mac: ethernet@48484000 { compatible = "ti,dra7-cpsw","ti,cpsw"; ti,hwmods = "gmac"; - clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>; + clocks = <&gmac_main_clk>, <&l3init_clkctrl DRA7_GMAC_CLKCTRL 25>; clock-names = "fck", "cpts"; cpdma_channels = <8>; ale_entries = <1024>; @@ -1858,7 +1903,7 @@ reg = <0x4ae3c000 0x2000>; syscon-raminit = <&scm_conf 0x558 0>; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&dcan1_sys_clk_mux>; + clocks = <&wkupaon_clkctrl DRA7_DCAN1_CLKCTRL 24>; status = "disabled"; }; @@ -1889,7 +1934,7 @@ reg = <0x58001000 0x1000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "dss_dispc"; - clocks = <&dss_dss_clk>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; /* CTRL_CORE_SMA_SW_1 */ syscon-pol = <&scm_conf 0x534>; @@ -1905,8 +1950,11 @@ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; ti,hwmods = "dss_hdmi"; - clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + dmas = <&sdma_xbar 76>; + dma-names = "audio_tx"; }; }; @@ -2052,6 +2100,19 @@ clocks = <&l3_iclk_div>; clock-names = "fck"; }; + + opp_supply_mpu: opp-supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0xc>; + ti,efuse-settings = < + /* uV offset */ + 1060000 0x0 + 1160000 0x4 + 1210000 0x8 + >; + ti,absolute-max-voltage-uv = <1500000>; + }; + }; thermal_zones: thermal-zones { @@ -2089,4 +2150,20 @@ temperature = <120000>; /* milli Celsius */ }; -/include/ "dra7xx-clocks.dtsi" +#include "dra7xx-clocks.dtsi" + +&core_crit { + temperature = <120000>; /* milli Celsius */ +}; + +&gpu_crit { + temperature = <120000>; /* milli Celsius */ +}; + +&dspeve_crit { + temperature = <120000>; /* milli Celsius */ +}; + +&iva_crit { + temperature = <120000>; /* milli Celsius */ +}; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 2e485a13dfd7..e85f560a2f78 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -514,7 +514,7 @@ &atl { assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_gfclk_mux>, + <&atl_clkctrl DRA7_ATL_CLKCTRL 26>, <&dpll_abe_ck>, <&dpll_abe_m2x2_ck>, <&atl_clkin2_ck>; @@ -532,7 +532,7 @@ &mcasp3 { #sound-dai-cells = <0>; - assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&atl_clkin2_ck>; status = "okay"; diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi index 57bfe5caf5e4..47bb90f41f3f 100644 --- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi +++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi @@ -148,3 +148,7 @@ &mmc1 { vqmmc-supply = <&ldo1_reg>; }; + +&cpu0 { + vdd-supply = <&smps1_reg>; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index 67107605fb4c..c011d2e64fef 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -25,8 +25,8 @@ <0x58004300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1"; - clocks = <&dss_dss_clk>, - <&dss_video1_clk>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>; clock-names = "fck", "video1_clk"; }; @@ -50,3 +50,15 @@ status = "disabled"; }; }; + +&pcie1_rc { + compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie"; +}; + +&pcie1_ep { + compatible = "ti,dra726-pcie-ep", "ti,dra7-pcie-ep"; +}; + +&pcie2_rc { + compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie"; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 24e6746c5b26..91e93ab588ca 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -93,9 +93,9 @@ reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2"; - clocks = <&dss_dss_clk>, - <&dss_video1_clk>, - <&dss_video2_clk>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 13>; clock-names = "fck", "video1_clk", "video2_clk"; }; @@ -124,3 +124,15 @@ status = "disabled"; }; }; + +&pcie1_rc { + compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie"; +}; + +&pcie1_ep { + compatible = "ti,dra746-pcie-ep", "ti,dra7-pcie-ep"; +}; + +&pcie2_rc { + compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie"; +}; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index b024a65c6e27..c4fe7f8ef72a 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -148,6 +148,7 @@ compatible = "ti,tps65917"; reg = <0x58>; ti,system-power-controller; + ti,palmas-override-powerhold; interrupt-controller; #interrupt-cells = <2>; @@ -421,3 +422,19 @@ spi-max-frequency = <96000000>; }; }; + +&pcie2_phy { + status = "okay"; +}; + +&pcie1_rc { + num-lanes = <2>; + phys = <&pcie1_phy>, <&pcie2_phy>; + phy-names = "pcie-phy0", "pcie-phy1"; +}; + +&pcie1_ep { + num-lanes = <2>; + phys = <&pcie1_phy>, <&pcie2_phy>; + phy-names = "pcie-phy0", "pcie-phy1"; +}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index e62b62875cba..69562cdbeada 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -11,25 +11,25 @@ atl_clkin0_ck: atl_clkin0_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_gfclk_mux>; + clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; }; atl_clkin1_ck: atl_clkin1_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_gfclk_mux>; + clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; }; atl_clkin2_ck: atl_clkin2_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_gfclk_mux>; + clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; }; atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_gfclk_mux>; + clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; }; hdmi_clkin_ck: hdmi_clkin_ck { @@ -809,70 +809,6 @@ assigned-clock-parents = <&dpll_core_h22x2_ck>; }; - mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <28>; - reg = <0x0550>; - }; - - mcasp1_ahclkx_mux: mcasp1_ahclkx_mux@550 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <24>; - reg = <0x0550>; - }; - - mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux@550 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; - ti,bit-shift = <22>; - reg = <0x0550>; - }; - - timer5_gfclk_mux: timer5_gfclk_mux@558 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; - ti,bit-shift = <24>; - reg = <0x0558>; - }; - - timer6_gfclk_mux: timer6_gfclk_mux@560 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; - ti,bit-shift = <24>; - reg = <0x0560>; - }; - - timer7_gfclk_mux: timer7_gfclk_mux@568 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; - ti,bit-shift = <24>; - reg = <0x0568>; - }; - - timer8_gfclk_mux: timer8_gfclk_mux@570 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; - ti,bit-shift = <24>; - reg = <0x0570>; - }; - - uart6_gfclk_mux: uart6_gfclk_mux@580 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x0580>; - }; - dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -1188,39 +1124,8 @@ clocks = <&sys_clkin1>, <&abe_lp_clk_div>; reg = <0x0108>; }; - - gpio1_dbclk: gpio1_dbclk@1838 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1838>; - }; - - dcan1_sys_clk_mux: dcan1_sys_clk_mux@1888 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin1>, <&sys_clkin2>; - ti,bit-shift = <24>; - reg = <0x1888>; - }; - - timer1_gfclk_mux: timer1_gfclk_mux@1840 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x1840>; - }; - - uart10_gfclk_mux: uart10_gfclk_mux@1880 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1880>; - }; }; + &cm_core_clocks { dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 { #clock-cells = <0>; @@ -1255,22 +1160,6 @@ reg = <0x021c>, <0x0220>; }; - optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 { - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - #clock-cells = <0>; - reg = <0x13b0>; - ti,bit-shift = <8>; - }; - - optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 { - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - #clock-cells = <0>; - reg = <0x13b8>; - ti,bit-shift = <8>; - }; - optfclk_pciephy_div: optfclk_pciephy_div@4a00821c { compatible = "ti,divider-clock"; clocks = <&apll_pcie_ck>; @@ -1281,38 +1170,6 @@ ti,max-div = <2>; }; - optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 { - compatible = "ti,gate-clock"; - clocks = <&apll_pcie_ck>; - #clock-cells = <0>; - reg = <0x13b0>; - ti,bit-shift = <9>; - }; - - optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 { - compatible = "ti,gate-clock"; - clocks = <&apll_pcie_ck>; - #clock-cells = <0>; - reg = <0x13b8>; - ti,bit-shift = <9>; - }; - - optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 { - compatible = "ti,gate-clock"; - clocks = <&optfclk_pciephy_div>; - #clock-cells = <0>; - reg = <0x13b0>; - ti,bit-shift = <10>; - }; - - optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 { - compatible = "ti,gate-clock"; - clocks = <&optfclk_pciephy_div>; - #clock-cells = <0>; - reg = <0x13b8>; - ti,bit-shift = <10>; - }; - apll_pcie_clkvcoldo: apll_pcie_clkvcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -1541,167 +1398,6 @@ reg = <0x06c0>; }; - dss_32khz_clk: dss_32khz_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <11>; - reg = <0x1120>; - }; - - dss_48mhz_clk: dss_48mhz_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&func_48m_fclk>; - ti,bit-shift = <9>; - reg = <0x1120>; - }; - - dss_dss_clk: dss_dss_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_per_h12x2_ck>; - ti,bit-shift = <8>; - reg = <0x1120>; - ti,set-rate-parent; - }; - - dss_hdmi_clk: dss_hdmi_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&hdmi_dpll_clk_mux>; - ti,bit-shift = <10>; - reg = <0x1120>; - }; - - dss_video1_clk: dss_video1_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&video1_dpll_clk_mux>; - ti,bit-shift = <12>; - reg = <0x1120>; - }; - - dss_video2_clk: dss_video2_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&video2_dpll_clk_mux>; - ti,bit-shift = <13>; - reg = <0x1120>; - }; - - gpio2_dbclk: gpio2_dbclk@1760 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1760>; - }; - - gpio3_dbclk: gpio3_dbclk@1768 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1768>; - }; - - gpio4_dbclk: gpio4_dbclk@1770 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1770>; - }; - - gpio5_dbclk: gpio5_dbclk@1778 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1778>; - }; - - gpio6_dbclk: gpio6_dbclk@1780 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1780>; - }; - - gpio7_dbclk: gpio7_dbclk@1810 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1810>; - }; - - gpio8_dbclk: gpio8_dbclk@1818 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1818>; - }; - - mmc1_clk32k: mmc1_clk32k@1328 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1328>; - }; - - mmc2_clk32k: mmc2_clk32k@1330 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1330>; - }; - - mmc3_clk32k: mmc3_clk32k@1820 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1820>; - }; - - mmc4_clk32k: mmc4_clk32k@1828 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1828>; - }; - - sata_ref_clk: sata_ref_clk@1388 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_clkin1>; - ti,bit-shift = <8>; - reg = <0x1388>; - }; - - usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@13f0 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3init_960m_gfclk>; - ti,bit-shift = <8>; - reg = <0x13f0>; - }; - - usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m@1340 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3init_960m_gfclk>; - ti,bit-shift = <8>; - reg = <0x1340>; - }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -1726,38 +1422,6 @@ reg = <0x0698>; }; - atl_dpll_clk_mux: atl_dpll_clk_mux@c00 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>; - ti,bit-shift = <24>; - reg = <0x0c00>; - }; - - atl_gfclk_mux: atl_gfclk_mux@c00 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>; - ti,bit-shift = <26>; - reg = <0x0c00>; - }; - - rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>; - ti,bit-shift = <24>; - reg = <0x13d0>; - }; - - gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>; - ti,bit-shift = <25>; - reg = <0x13d0>; - }; - gpu_core_gclk_mux: gpu_core_gclk_mux@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -1787,362 +1451,6 @@ ti,dividers = <8>, <16>, <32>; }; - mcasp2_ahclkr_mux: mcasp2_ahclkr_mux@1860 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <28>; - reg = <0x1860>; - }; - - mcasp2_ahclkx_mux: mcasp2_ahclkx_mux@1860 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <24>; - reg = <0x1860>; - }; - - mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux@1860 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; - ti,bit-shift = <22>; - reg = <0x1860>; - }; - - mcasp3_ahclkx_mux: mcasp3_ahclkx_mux@1868 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <24>; - reg = <0x1868>; - assigned-clocks = <&mcasp3_ahclkx_mux>; - assigned-clock-parents = <&abe_24m_fclk>; - }; - - mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; - ti,bit-shift = <22>; - reg = <0x1868>; - }; - - mcasp4_ahclkx_mux: mcasp4_ahclkx_mux@1898 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <24>; - reg = <0x1898>; - }; - - mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux@1898 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; - ti,bit-shift = <22>; - reg = <0x1898>; - }; - - mcasp5_ahclkx_mux: mcasp5_ahclkx_mux@1878 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <24>; - reg = <0x1878>; - }; - - mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux@1878 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; - ti,bit-shift = <22>; - reg = <0x1878>; - }; - - mcasp6_ahclkx_mux: mcasp6_ahclkx_mux@1904 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <24>; - reg = <0x1904>; - }; - - mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux@1904 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; - ti,bit-shift = <22>; - reg = <0x1904>; - }; - - mcasp7_ahclkx_mux: mcasp7_ahclkx_mux@1908 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <24>; - reg = <0x1908>; - }; - - mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux@1908 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; - ti,bit-shift = <22>; - reg = <0x1908>; - }; - - mcasp8_ahclkx_mux: mcasp8_ahclkx_mux@1890 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <22>; - reg = <0x1890>; - }; - - mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux@1890 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; - ti,bit-shift = <24>; - reg = <0x1890>; - }; - - mmc1_fclk_mux: mmc1_fclk_mux@1328 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1328>; - }; - - mmc1_fclk_div: mmc1_fclk_div@1328 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&mmc1_fclk_mux>; - ti,bit-shift = <25>; - ti,max-div = <4>; - reg = <0x1328>; - ti,index-power-of-two; - }; - - mmc2_fclk_mux: mmc2_fclk_mux@1330 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1330>; - }; - - mmc2_fclk_div: mmc2_fclk_div@1330 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&mmc2_fclk_mux>; - ti,bit-shift = <25>; - ti,max-div = <4>; - reg = <0x1330>; - ti,index-power-of-two; - }; - - mmc3_gfclk_mux: mmc3_gfclk_mux@1820 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1820>; - }; - - mmc3_gfclk_div: mmc3_gfclk_div@1820 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&mmc3_gfclk_mux>; - ti,bit-shift = <25>; - ti,max-div = <4>; - reg = <0x1820>; - ti,index-power-of-two; - }; - - mmc4_gfclk_mux: mmc4_gfclk_mux@1828 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1828>; - }; - - mmc4_gfclk_div: mmc4_gfclk_div@1828 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&mmc4_gfclk_mux>; - ti,bit-shift = <25>; - ti,max-div = <4>; - reg = <0x1828>; - ti,index-power-of-two; - }; - - qspi_gfclk_mux: qspi_gfclk_mux@1838 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>; - ti,bit-shift = <24>; - reg = <0x1838>; - }; - - qspi_gfclk_div: qspi_gfclk_div@1838 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&qspi_gfclk_mux>; - ti,bit-shift = <25>; - ti,max-div = <4>; - reg = <0x1838>; - ti,index-power-of-two; - }; - - timer10_gfclk_mux: timer10_gfclk_mux@1728 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x1728>; - }; - - timer11_gfclk_mux: timer11_gfclk_mux@1730 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x1730>; - }; - - timer13_gfclk_mux: timer13_gfclk_mux@17c8 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x17c8>; - }; - - timer14_gfclk_mux: timer14_gfclk_mux@17d0 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x17d0>; - }; - - timer15_gfclk_mux: timer15_gfclk_mux@17d8 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x17d8>; - }; - - timer16_gfclk_mux: timer16_gfclk_mux@1830 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x1830>; - }; - - timer2_gfclk_mux: timer2_gfclk_mux@1738 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x1738>; - }; - - timer3_gfclk_mux: timer3_gfclk_mux@1740 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x1740>; - }; - - timer4_gfclk_mux: timer4_gfclk_mux@1748 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x1748>; - }; - - timer9_gfclk_mux: timer9_gfclk_mux@1750 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; - ti,bit-shift = <24>; - reg = <0x1750>; - }; - - uart1_gfclk_mux: uart1_gfclk_mux@1840 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1840>; - }; - - uart2_gfclk_mux: uart2_gfclk_mux@1848 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1848>; - }; - - uart3_gfclk_mux: uart3_gfclk_mux@1850 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1850>; - }; - - uart4_gfclk_mux: uart4_gfclk_mux@1858 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1858>; - }; - - uart5_gfclk_mux: uart5_gfclk_mux@1870 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1870>; - }; - - uart7_gfclk_mux: uart7_gfclk_mux@18d0 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x18d0>; - }; - - uart8_gfclk_mux: uart8_gfclk_mux@18e0 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x18e0>; - }; - - uart9_gfclk_mux: uart9_gfclk_mux@18e8 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x18e8>; - }; - vip1_gclk_mux: vip1_gclk_mux@1020 { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -2216,3 +1524,210 @@ reg = <0x6c4>; }; }; + +&cm_core_aon { + mpu_cm: mpu_cm@300 { + compatible = "ti,omap4-cm"; + reg = <0x300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300 0x100>; + + mpu_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + ipu_cm: ipu_cm@500 { + compatible = "ti,omap4-cm"; + reg = <0x500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x500 0x100>; + + ipu_clkctrl: clk@40 { + compatible = "ti,clkctrl"; + reg = <0x40 0x44>; + #clock-cells = <2>; + }; + }; + + rtc_cm: rtc_cm@700 { + compatible = "ti,omap4-cm"; + reg = <0x700 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x700 0x100>; + + rtc_clkctrl: clk@40 { + compatible = "ti,clkctrl"; + reg = <0x40 0x8>; + #clock-cells = <2>; + }; + }; + +}; + +&cm_core { + coreaon_cm: coreaon_cm@600 { + compatible = "ti,omap4-cm"; + reg = <0x600 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x600 0x100>; + + coreaon_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x1c>; + #clock-cells = <2>; + }; + }; + + l3main1_cm: l3main1_cm@700 { + compatible = "ti,omap4-cm"; + reg = <0x700 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x700 0x100>; + + l3main1_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x74>; + #clock-cells = <2>; + }; + }; + + dma_cm: dma_cm@a00 { + compatible = "ti,omap4-cm"; + reg = <0xa00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa00 0x100>; + + dma_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + emif_cm: emif_cm@b00 { + compatible = "ti,omap4-cm"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb00 0x100>; + + emif_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + atl_cm: atl_cm@c00 { + compatible = "ti,omap4-cm"; + reg = <0xc00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xc00 0x100>; + + atl_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x4>; + #clock-cells = <2>; + }; + }; + + l4cfg_cm: l4cfg_cm@d00 { + compatible = "ti,omap4-cm"; + reg = <0xd00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd00 0x100>; + + l4cfg_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x84>; + #clock-cells = <2>; + }; + }; + + l3instr_cm: l3instr_cm@e00 { + compatible = "ti,omap4-cm"; + reg = <0xe00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe00 0x100>; + + l3instr_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc>; + #clock-cells = <2>; + }; + }; + + dss_cm: dss_cm@1100 { + compatible = "ti,omap4-cm"; + reg = <0x1100 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1100 0x100>; + + dss_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x14>; + #clock-cells = <2>; + }; + }; + + l3init_cm: l3init_cm@1300 { + compatible = "ti,omap4-cm"; + reg = <0x1300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1300 0x100>; + + l3init_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xd4>; + #clock-cells = <2>; + }; + }; + + l4per_cm: l4per_cm@1700 { + compatible = "ti,omap4-cm"; + reg = <0x1700 0x300>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1700 0x300>; + + l4per_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x20c>; + #clock-cells = <2>; + + assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; + assigned-clock-parents = <&abe_24m_fclk>; + }; + }; + +}; + +&prm { + wkupaon_cm: wkupaon_cm@1800 { + compatible = "ti,omap4-cm"; + reg = <0x1800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1800 0x100>; + + wkupaon_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x6c>; + #clock-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts index c9f3ea29cf9e..adfa559a488b 100644 --- a/arch/arm/boot/dts/efm32gg-dk3750.dts +++ b/arch/arm/boot/dts/efm32gg-dk3750.dts @@ -37,7 +37,7 @@ }; eeprom@50 { - compatible = "microchip,24c02"; + compatible = "microchip,24c02", "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 123b203be06c..b554f85add41 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -36,6 +36,18 @@ status = "okay"; }; + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usart0: serial@fffb0000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index 4cbfa09c6c4e..20446a846a98 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source * @@ -6,10 +7,6 @@ * * Device tree source file for Samsung's ARTIK5 evaluation board * which is based on Samsung Exynos3250 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 152e0291d0da..0aa577fe9f95 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos3250 based ARTIK5 module device tree source * @@ -6,10 +7,6 @@ * * Device tree source file for Samsung's ARTIK5 module which is based on * Samsung Exynos3250 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos3250.dtsi" diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 029eb18590cf..6ffedf4ed9f2 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos3250 based Monk board device tree source * @@ -6,10 +7,6 @@ * * Device tree source file for Samsung's Monk board which is based on * Samsung Exynos3250 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi index a149f148e659..dff3c6e3aa1f 100644 --- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source * @@ -6,11 +7,7 @@ * * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 3743df4de390..2c3460781cc6 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos3250 based Rinato board device tree source * @@ -6,10 +7,6 @@ * * Device tree source file for Samsung's Rinato board which is based on * Samsung Exynos3250 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 2bd3872221a1..b8fb94f5daa8 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos3250 SoC device tree source * @@ -11,10 +12,6 @@ * Note: This file does not include device nodes for all the controllers in * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos4-cpu-thermal.dtsi" @@ -164,31 +161,31 @@ syscon = <&pmu_system_controller>; }; - pd_cam: cam-power-domain@10023C00 { + pd_cam: cam-power-domain@10023c00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; #power-domain-cells = <0>; }; - pd_mfc: mfc-power-domain@10023C40 { + pd_mfc: mfc-power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; #power-domain-cells = <0>; }; - pd_g3d: g3d-power-domain@10023C60 { + pd_g3d: g3d-power-domain@10023c60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; #power-domain-cells = <0>; }; - pd_lcd0: lcd0-power-domain@10023C80 { + pd_lcd0: lcd0-power-domain@10023c80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; #power-domain-cells = <0>; }; - pd_isp: isp-power-domain@10023CA0 { + pd_isp: isp-power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; @@ -204,7 +201,7 @@ <&cmu CLK_FIN_PLL>; }; - cmu_dmc: clock-controller@105C0000 { + cmu_dmc: clock-controller@105c0000 { compatible = "samsung,exynos3250-cmu-dmc"; reg = <0x105C0000 0x2000>; #clock-cells = <1>; @@ -219,7 +216,7 @@ status = "disabled"; }; - tmu: tmu@100C0000 { + tmu: tmu@100c0000 { compatible = "samsung,exynos3250-tmu"; reg = <0x100C0000 0x100>; interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; @@ -287,7 +284,7 @@ status = "disabled"; }; - sysmmu_jpeg: sysmmu@11A60000 { + sysmmu_jpeg: sysmmu@11a60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11a60000 0x1000>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, @@ -313,7 +310,7 @@ status = "disabled"; }; - dsi_0: dsi@11C80000 { + dsi_0: dsi@11c80000 { compatible = "samsung,exynos3250-mipi-dsi"; reg = <0x11C80000 0x10000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; @@ -328,7 +325,7 @@ status = "disabled"; }; - sysmmu_fimd0: sysmmu@11E20000 { + sysmmu_fimd0: sysmmu@11e20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11e20000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, @@ -386,7 +383,7 @@ status = "disabled"; }; - exynos_usbphy: exynos-usbphy@125B0000 { + exynos_usbphy: exynos-usbphy@125b0000 { compatible = "samsung,exynos3250-usb2-phy"; reg = <0x125B0000 0x100>; samsung,pmureg-phandle = <&pmu_system_controller>; @@ -425,7 +422,7 @@ }; }; - adc: adc@126C0000 { + adc: adc@126c0000 { compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2"; reg = <0x126C0000 0x100>; @@ -544,7 +541,7 @@ status = "disabled"; }; - i2c_4: i2c@138A0000 { + i2c_4: i2c@138a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -557,7 +554,7 @@ status = "disabled"; }; - i2c_5: i2c@138B0000 { + i2c_5: i2c@138b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -570,7 +567,7 @@ status = "disabled"; }; - i2c_6: i2c@138C0000 { + i2c_6: i2c@138c0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -583,7 +580,7 @@ status = "disabled"; }; - i2c_7: i2c@138D0000 { + i2c_7: i2c@138d0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -641,7 +638,7 @@ status = "disabled"; }; - pwm: pwm@139D0000 { + pwm: pwm@139d0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi index 735cb2f10817..021d9fc1b492 100644 --- a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos4 thermal zone * * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 4768b086ed67..6d59cc827649 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4 SoC series common device tree source * @@ -13,10 +14,6 @@ * Note: This file does not include device nodes for all the controllers in * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/exynos4.h> @@ -101,28 +98,28 @@ syscon = <&pmu_system_controller>; }; - pd_mfc: mfc-power-domain@10023C40 { + pd_mfc: mfc-power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; #power-domain-cells = <0>; label = "MFC"; }; - pd_g3d: g3d-power-domain@10023C60 { + pd_g3d: g3d-power-domain@10023c60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; #power-domain-cells = <0>; label = "G3D"; }; - pd_lcd0: lcd0-power-domain@10023C80 { + pd_lcd0: lcd0-power-domain@10023c80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; #power-domain-cells = <0>; label = "LCD0"; }; - pd_tv: tv-power-domain@10023C20 { + pd_tv: tv-power-domain@10023c20 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; #power-domain-cells = <0>; @@ -130,21 +127,21 @@ label = "TV"; }; - pd_cam: cam-power-domain@10023C00 { + pd_cam: cam-power-domain@10023c00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; #power-domain-cells = <0>; label = "CAM"; }; - pd_gps: gps-power-domain@10023CE0 { + pd_gps: gps-power-domain@10023ce0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CE0 0x20>; #power-domain-cells = <0>; label = "GPS"; }; - pd_gps_alive: gps-alive-power-domain@10023D00 { + pd_gps_alive: gps-alive-power-domain@10023d00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023D00 0x20>; #power-domain-cells = <0>; @@ -184,7 +181,7 @@ interrupt-parent = <&gic>; }; - dsi_0: dsi@11C80000 { + dsi_0: dsi@11c80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; @@ -297,7 +294,7 @@ status = "disabled"; }; - keypad: keypad@100A0000 { + keypad: keypad@100a0000 { compatible = "samsung,s5pv210-keypad"; reg = <0x100A0000 0x100>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; @@ -342,7 +339,7 @@ status = "disabled"; }; - exynos_usbphy: exynos-usbphy@125B0000 { + exynos_usbphy: exynos-usbphy@125b0000 { compatible = "samsung,exynos4210-usb2-phy"; reg = <0x125B0000 0x100>; samsung,pmureg-phandle = <&pmu_system_controller>; @@ -538,7 +535,7 @@ status = "disabled"; }; - i2c_4: i2c@138A0000 { + i2c_4: i2c@138a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -551,7 +548,7 @@ status = "disabled"; }; - i2c_5: i2c@138B0000 { + i2c_5: i2c@138b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -564,7 +561,7 @@ status = "disabled"; }; - i2c_6: i2c@138C0000 { + i2c_6: i2c@138c0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -577,7 +574,7 @@ status = "disabled"; }; - i2c_7: i2c@138D0000 { + i2c_7: i2c@138d0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -590,7 +587,7 @@ status = "disabled"; }; - i2c_8: i2c@138E0000 { + i2c_8: i2c@138e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-hdmiphy-i2c"; @@ -651,7 +648,7 @@ status = "disabled"; }; - pwm: pwm@139D0000 { + pwm: pwm@139d0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, @@ -720,7 +717,7 @@ status = "disabled"; }; - tmu: tmu@100C0000 { + tmu: tmu@100c0000 { #include "exynos4412-tmu-sensor-conf.dtsi" }; @@ -743,7 +740,7 @@ iommus = <&sysmmu_rotator>; }; - hdmi: hdmi@12D00000 { + hdmi: hdmi@12d00000 { compatible = "samsung,exynos4210-hdmi"; reg = <0x12D00000 0x70000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; @@ -755,10 +752,11 @@ phy = <&hdmi_i2c_phy>; power-domains = <&pd_tv>; samsung,syscon-phandle = <&pmu_system_controller>; + #sound-dai-cells = <0>; status = "disabled"; }; - hdmicec: cec@100B0000 { + hdmicec: cec@100b0000 { compatible = "samsung,s5p-cec"; reg = <0x100B0000 0x200>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -771,7 +769,7 @@ status = "disabled"; }; - mixer: mixer@12C10000 { + mixer: mixer@12c10000 { compatible = "samsung,exynos4210-mixer"; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; @@ -910,7 +908,7 @@ #iommu-cells = <0>; }; - sysmmu_tv: sysmmu@12E20000 { + sysmmu_tv: sysmmu@12e20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x12E20000 0x1000>; interrupt-parent = <&combiner>; @@ -921,7 +919,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc0: sysmmu@11A20000 { + sysmmu_fimc0: sysmmu@11a20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11A20000 0x1000>; interrupt-parent = <&combiner>; @@ -932,7 +930,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc1: sysmmu@11A30000 { + sysmmu_fimc1: sysmmu@11a30000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11A30000 0x1000>; interrupt-parent = <&combiner>; @@ -943,7 +941,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc2: sysmmu@11A40000 { + sysmmu_fimc2: sysmmu@11a40000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11A40000 0x1000>; interrupt-parent = <&combiner>; @@ -954,7 +952,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc3: sysmmu@11A50000 { + sysmmu_fimc3: sysmmu@11a50000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11A50000 0x1000>; interrupt-parent = <&combiner>; @@ -965,7 +963,7 @@ #iommu-cells = <0>; }; - sysmmu_jpeg: sysmmu@11A60000 { + sysmmu_jpeg: sysmmu@11a60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11A60000 0x1000>; interrupt-parent = <&combiner>; @@ -976,7 +974,7 @@ #iommu-cells = <0>; }; - sysmmu_rotator: sysmmu@12A30000 { + sysmmu_rotator: sysmmu@12a30000 { compatible = "samsung,exynos-sysmmu"; reg = <0x12A30000 0x1000>; interrupt-parent = <&combiner>; @@ -986,7 +984,7 @@ #iommu-cells = <0>; }; - sysmmu_fimd0: sysmmu@11E20000 { + sysmmu_fimd0: sysmmu@11e20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11E20000 0x1000>; interrupt-parent = <&combiner>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 084fcc5574ef..9a310e841d5d 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4210 based Origen board device tree source * @@ -8,11 +9,7 @@ * * Device tree source file for Insignal's Origen board which is based on * Samsung's Exynos4210 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos4210.dtsi" diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 82c32d4d83d8..dbe6c052d8c1 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source * @@ -8,11 +9,7 @@ * * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 9c98a3724396..7a3e621edede 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4210 based SMDKV310 board device tree source * @@ -8,11 +9,7 @@ * * Device tree source file for Samsung's SMDKV310 board which is based on * Samsung's Exynos4210 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos4210.dtsi" diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 7b6ab7265110..aaade17b140e 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4210 based Trats board device tree source * @@ -6,11 +7,7 @@ * * Device tree source file for Samsung's Trats board which is based on * Samsung's Exynos4210 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos4210.dtsi" diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index acd2b2286ccb..21fff7cd3aa4 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4210 based Universal C210 board device tree source * @@ -6,11 +7,7 @@ * * Device tree source file for Samsung's Universal C210 board which is based on * Samsung's Exynos4210 rev0 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos4210.dtsi" diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 03dd61f64809..cc978cf28267 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4210 SoC device tree source * @@ -13,11 +14,7 @@ * Note: This file does not include device nodes for all the controllers in * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include "exynos4.dtsi" #include "exynos4210-pinctrl.dtsi" @@ -82,7 +79,7 @@ }; }; - pd_lcd1: lcd1-power-domain@10023CA0 { + pd_lcd1: lcd1-power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; @@ -156,7 +153,7 @@ reg = <0x03860000 0x1000>; }; - tmu: tmu@100C0000 { + tmu: tmu@100c0000 { compatible = "samsung,exynos4210-tmu"; interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; @@ -229,7 +226,7 @@ }; }; - mixer: mixer@12C10000 { + mixer: mixer@12c10000 { clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer", "sclk_mixer"; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, @@ -245,7 +242,7 @@ status = "disabled"; }; - sysmmu_g2d: sysmmu@12A20000 { + sysmmu_g2d: sysmmu@12a20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x12A20000 0x1000>; interrupt-parent = <&combiner>; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index d66093084dbb..a4cd4939fe9a 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * TOPEET's Exynos4412 based itop board device tree source * @@ -7,10 +8,6 @@ * * Device tree source file for TOPEET iTop Exynos 4412 core board * which is based on Samsung's Exynos4412 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index bda49b232f7b..ab7affab7f1c 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * TOPEET's Exynos4412 based itop board device tree source * @@ -7,10 +8,6 @@ * * Device tree source file for TOPEET iTop Exynos 4412 SCP package core * board which is based on Samsung's Exynos4412 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/samsung,s2mps11.h> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index a21be71000c1..556ea78b8e32 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards * device tree source - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/sound/samsung-i2s.h> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 44a4de08466b..bdcd4523cc1c 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel's Exynos4412 based ODROID-U3 board device tree source * @@ -5,11 +6,7 @@ * * Device tree source file for Hardkernel's ODROID-U3 board which is based * on Samsung's Exynos4412 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos4412-odroid-common.dtsi" diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index acf48a018e5e..2dff129bc2ad 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel's Exynos4412 based ODROID-X board device tree source * @@ -5,11 +6,7 @@ * * Device tree source file for Hardkernel's ODROID-X board which is based * on Samsung's Exynos4412 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos4412-odroid-common.dtsi" diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts index d867b2ee95ca..f4b68c75c962 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx2.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel's Exynos4412 based ODROID-X2 board device tree source * @@ -5,11 +6,7 @@ * * Device tree source file for Hardkernel's ODROID-X2 board which is based * on Samsung's Exynos4412 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include "exynos4412-odroidx.dts" #include "exynos4412-prime.dtsi" diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index b0b5ec7903a5..1514f0dbaff8 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Insignal's Exynos4412 based Origen board device tree source * @@ -6,11 +7,7 @@ * * Device tree source file for Insignal's Origen board which is based on * Samsung's Exynos4412 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos4412.dtsi" diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi index 4eebd4721a5f..e8dd5f2d976f 100644 --- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source * @@ -6,11 +7,7 @@ * * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/pinctrl/samsung.h> @@ -925,7 +922,7 @@ }; }; - pinctrl_3: pinctrl@106E0000 { + pinctrl_3: pinctrl@106e0000 { gpv0: gpv0 { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi index 16e4b77d8cb1..3a3b2fafefdd 100644 --- a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos4412 PPMU common device tree * * Copyright (C) 2015 Samsung Electronics * Author: Chanwoo Choi <cw00.choi@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &ppmu_dmc0 { diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi index a67bd953d754..8e7a7fb98124 100644 --- a/arch/arm/boot/dts/exynos4412-prime.dtsi +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4412 Prime SoC device tree source * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index 7fcb43431b59..5c5c2887c14f 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4412 based SMDK board device tree source * @@ -6,11 +7,7 @@ * * Device tree source file for Samsung's SMDK4412 board which is based on * Samsung's Exynos4412 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos4412.dtsi" diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 220cdf109405..f285790e8e04 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -300,6 +300,13 @@ }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; + sound { compatible = "samsung,trats2-audio"; samsung,i2s-controller = <&i2s0>; @@ -454,7 +461,7 @@ reg = <0>; vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; - reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; @@ -1350,6 +1357,26 @@ status = "okay"; }; +&sdhci_3 { + #address-cells = <1>; + #size-cells = <0>; + non-removable; + bus-width = <4>; + + mmc-pwrseq = <&wlan_pwrseq>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_NONE>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index b255ac55b1c1..e4ad2fc0329e 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4412 SoC device tree source * @@ -11,11 +12,7 @@ * Note: This file does not include device nodes for all the controllers in * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include "exynos4.dtsi" #include "exynos4412-pinctrl.dtsi" @@ -38,7 +35,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu0: cpu@A00 { + cpu0: cpu@a00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; @@ -50,21 +47,21 @@ #cooling-cells = <2>; /* min followed by max */ }; - cpu@A01 { + cpu@a01 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; operating-points-v2 = <&cpu0_opp_table>; }; - cpu@A02 { + cpu@a02 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA02>; operating-points-v2 = <&cpu0_opp_table>; }; - cpu@A03 { + cpu@a03 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA03>; @@ -168,7 +165,7 @@ }; }; - pd_isp: isp-power-domain@10023CA0 { + pd_isp: isp-power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; @@ -191,10 +188,19 @@ clock: clock-controller@10030000 { compatible = "samsung,exynos4412-clock"; - reg = <0x10030000 0x20000>; + reg = <0x10030000 0x18000>; #clock-cells = <1>; }; + isp_clock: clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; + mct@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; @@ -224,7 +230,7 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; - adc: adc@126C0000 { + adc: adc@126c0000 { compatible = "samsung,exynos-adc-v1"; reg = <0x126C0000 0x100>; interrupt-parent = <&combiner>; @@ -257,18 +263,18 @@ reg = <0x12390000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE0>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; clock-names = "flite"; iommus = <&sysmmu_fimc_lite0>; status = "disabled"; }; - fimc_lite_1: fimc-lite@123A0000 { + fimc_lite_1: fimc-lite@123a0000 { compatible = "samsung,exynos4212-fimc-lite"; reg = <0x123A0000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE1>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE1>; clock-names = "flite"; iommus = <&sysmmu_fimc_lite1>; status = "disabled"; @@ -280,29 +286,35 @@ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE0>, - <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, - <&clock CLK_PPMUISPMX>, + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE1>, + <&isp_clock CLK_ISP_PPMUISPX>, + <&isp_clock CLK_ISP_PPMUISPMX>, + <&isp_clock CLK_ISP_FIMC_ISP>, + <&isp_clock CLK_ISP_FIMC_DRC>, + <&isp_clock CLK_ISP_FIMC_FD>, + <&isp_clock CLK_ISP_MCUISP>, + <&isp_clock CLK_ISP_GICISP>, + <&isp_clock CLK_ISP_MCUCTL_ISP>, + <&isp_clock CLK_ISP_PWM_ISP>, + <&isp_clock CLK_ISP_DIV_ISP0>, + <&isp_clock CLK_ISP_DIV_ISP1>, + <&isp_clock CLK_ISP_DIV_MCUISP0>, + <&isp_clock CLK_ISP_DIV_MCUISP1>, <&clock CLK_MOUT_MPLL_USER_T>, - <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>, - <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>, - <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>, - <&clock CLK_PWM_ISP>, - <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>, - <&clock CLK_DIV_MCUISP0>, - <&clock CLK_DIV_MCUISP1>, - <&clock CLK_UART_ISP_SCLK>, - <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, + <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>, - <&clock CLK_DIV_ACLK400_MCUISP>; + <&clock CLK_DIV_ACLK200>, + <&clock CLK_DIV_ACLK400_MCUISP>, + <&clock CLK_UART_ISP_SCLK>; clock-names = "lite0", "lite1", "ppmuispx", - "ppmuispmx", "mpll", "isp", + "ppmuispmx", "isp", "drc", "fd", "mcuisp", "gicisp", "mcuctl_isp", "pwm_isp", "ispdiv0", "ispdiv1", "mcuispdiv0", - "mcuispdiv1", "uart", "aclk200", - "div_aclk200", "aclk400mcuisp", - "div_aclk400mcuisp"; + "mcuispdiv1", "mpll", "aclk200", + "aclk400mcuisp", "div_aclk200", + "div_aclk400mcuisp", "uart"; iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; @@ -318,7 +330,7 @@ i2c1_isp: i2c-isp@12140000 { compatible = "samsung,exynos4212-i2c-isp"; reg = <0x12140000 0x100>; - clocks = <&clock CLK_I2C1_ISP>; + clocks = <&isp_clock CLK_ISP_I2C1_ISP>; clock-names = "i2c_isp"; #address-cells = <1>; #size-cells = <0>; @@ -355,7 +367,7 @@ interrupts = <16 2>; power-domains = <&pd_isp>; clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_ISP>; + clocks = <&isp_clock CLK_ISP_SMMU_ISP>; #iommu-cells = <0>; }; @@ -366,51 +378,53 @@ interrupts = <16 3>; power-domains = <&pd_isp>; clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_DRC>; + clocks = <&isp_clock CLK_ISP_SMMU_DRC>; #iommu-cells = <0>; }; - sysmmu_fimc_fd: sysmmu@122A0000 { + sysmmu_fimc_fd: sysmmu@122a0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x122A0000 0x1000>; interrupt-parent = <&combiner>; interrupts = <16 4>; power-domains = <&pd_isp>; clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FD>; + clocks = <&isp_clock CLK_ISP_SMMU_FD>; #iommu-cells = <0>; }; - sysmmu_fimc_mcuctl: sysmmu@122B0000 { + sysmmu_fimc_mcuctl: sysmmu@122b0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x122B0000 0x1000>; interrupt-parent = <&combiner>; interrupts = <16 5>; power-domains = <&pd_isp>; clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_ISPCX>; + clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>; #iommu-cells = <0>; }; - sysmmu_fimc_lite0: sysmmu@123B0000 { + sysmmu_fimc_lite0: sysmmu@123b0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x123B0000 0x1000>; interrupt-parent = <&combiner>; interrupts = <16 0>; power-domains = <&pd_isp>; clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>; + clocks = <&isp_clock CLK_ISP_SMMU_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE0>; #iommu-cells = <0>; }; - sysmmu_fimc_lite1: sysmmu@123C0000 { + sysmmu_fimc_lite1: sysmmu@123c0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x123C0000 0x1000>; interrupt-parent = <&combiner>; interrupts = <16 1>; power-domains = <&pd_isp>; clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>; + clocks = <&isp_clock CLK_ISP_SMMU_LITE1>, + <&isp_clock CLK_ISP_FIMC_LITE1>; #iommu-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 66d22521c976..f8d7de1144f1 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5 SoC series common device tree source * @@ -7,10 +8,6 @@ * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular * SoCs from Exynos5 series can include this file and provide values for SoCs * specfic bindings. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -106,31 +103,31 @@ reg = <0x10050000 0x5000>; }; - serial_0: serial@12C00000 { + serial_0: serial@12c00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; }; - serial_1: serial@12C10000 { + serial_1: serial@12c10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; }; - serial_2: serial@12C20000 { + serial_2: serial@12c20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; }; - serial_3: serial@12C30000 { + serial_3: serial@12c30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; }; - i2c_0: i2c@12C60000 { + i2c_0: i2c@12c60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; @@ -140,7 +137,7 @@ status = "disabled"; }; - i2c_1: i2c@12C70000 { + i2c_1: i2c@12c70000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C70000 0x100>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; @@ -150,7 +147,7 @@ status = "disabled"; }; - i2c_2: i2c@12C80000 { + i2c_2: i2c@12c80000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C80000 0x100>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; @@ -160,7 +157,7 @@ status = "disabled"; }; - i2c_3: i2c@12C90000 { + i2c_3: i2c@12c90000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C90000 0x100>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; @@ -170,14 +167,14 @@ status = "disabled"; }; - pwm: pwm@12DD0000 { + pwm: pwm@12dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x12DD0000 0x100>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; }; - rtc: rtc@101E0000 { + rtc: rtc@101e0000 { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, @@ -195,7 +192,7 @@ status = "disabled"; }; - dp: dp-controller@145B0000 { + dp: dp-controller@145b0000 { compatible = "samsung,exynos5-dp"; reg = <0x145B0000 0x1000>; interrupts = <10 3>; @@ -204,5 +201,28 @@ #size-cells = <0>; status = "disabled"; }; + + sss: sss@10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + prng: rng@10830400 { + compatible = "samsung,exynos5250-prng"; + reg = <0x10830400 0x200>; + }; + + trng: rng@10830600 { + compatible = "samsung,exynos5250-trng"; + reg = <0x10830600 0x100>; + }; + + g2d: g2d@10850000 { + compatible = "samsung,exynos5250-g2d"; + reg = <0x10850000 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 0efd678b8251..7a8a5c55701a 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5250 based Arndale board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 1fd122db18e6..6ff6dea29d44 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source * @@ -6,11 +7,7 @@ * * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 1e3f9627766c..d5e66189ed2a 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG SMDK5250 board device tree source * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 2e7175d2b1b8..59cf1b202849 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Google Snow board device tree source * * Copyright (c) 2012 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts index 90560c316f64..0348b1c49a69 100644 --- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts +++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Google Snow Rev 5+ board device tree source * * Copyright (c) 2012 Google, Inc * Copyright (c) 2015 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index df48f2cc96f7..4827cb506fa3 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Google Snow board device tree source * * Copyright (c) 2012 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 47dbc50546c1..3d501926c227 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Google Spring board device tree source * * Copyright (c) 2013 Google, Inc * Copyright (c) 2014 SUSE LINUX Products GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 5286084e1032..56626d1a4235 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS5250 SoC device tree source * @@ -11,11 +12,7 @@ * Note: This file does not include device nodes for all the controllers in * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases, * additional nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/clock/exynos5250.h> #include "exynos5.dtsi" @@ -111,21 +108,28 @@ }; }; - pd_gsc: gsc-power-domain@10044000 { + pd_gsc: power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; label = "GSC"; }; - pd_mfc: mfc-power-domain@10044040 { + pd_mfc: power-domain@10044040 { compatible = "samsung,exynos4210-pd"; reg = <0x10044040 0x20>; #power-domain-cells = <0>; label = "MFC"; }; - pd_disp1: disp1-power-domain@100440A0 { + pd_g3d: power-domain@10044060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044060 0x20>; + #power-domain-cells = <0>; + label = "G3D"; + }; + + pd_disp1: power-domain@100440a0 { compatible = "samsung,exynos4210-pd"; reg = <0x100440A0 0x20>; #power-domain-cells = <0>; @@ -136,6 +140,13 @@ clock-names = "oscclk", "clk0", "clk1"; }; + pd_mau: power-domain@100440c0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440C0 0x20>; + #power-domain-cells = <0>; + label = "MAU"; + }; + clock: clock-controller@10010000 { compatible = "samsung,exynos5250-clock"; reg = <0x10010000 0x30000>; @@ -149,6 +160,7 @@ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; + power-domains = <&pd_mau>; }; timer { @@ -165,7 +177,7 @@ clock-frequency = <24000000>; }; - mct@101C0000 { + mct@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; @@ -223,6 +235,7 @@ compatible = "samsung,exynos5250-pinctrl"; reg = <0x03860000 0x1000>; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_mau>; }; pmu_system_controller: system-controller@10040000 { @@ -236,7 +249,7 @@ interrupt-parent = <&gic>; }; - watchdog@101D0000 { + watchdog@101d0000 { compatible = "samsung,exynos5250-wdt"; reg = <0x101D0000 0x100>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; @@ -245,15 +258,6 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; - g2d@10850000 { - compatible = "samsung,exynos5250-g2d"; - reg = <0x10850000 0x1000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_G2D>; - clock-names = "fimg2d"; - iommus = <&sysmmu_g2d>; - }; - mfc: codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; @@ -265,7 +269,7 @@ iommu-names = "left", "right"; }; - rotator: rotator@11C00000 { + rotator: rotator@11c00000 { compatible = "samsung,exynos5250-rotator"; reg = <0x11C00000 0x64>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; @@ -283,7 +287,7 @@ #include "exynos4412-tmu-sensor-conf.dtsi" }; - sata: sata@122F0000 { + sata: sata@122f0000 { compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; reg = <0x122F0000 0x1ff>; @@ -306,7 +310,7 @@ }; /* i2c_0-3 are defined in exynos5.dtsi */ - i2c_4: i2c@12CA0000 { + i2c_4: i2c@12ca0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CA0000 0x100>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; @@ -319,7 +323,7 @@ status = "disabled"; }; - i2c_5: i2c@12CB0000 { + i2c_5: i2c@12cb0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CB0000 0x100>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; @@ -332,7 +336,7 @@ status = "disabled"; }; - i2c_6: i2c@12CC0000 { + i2c_6: i2c@12cc0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CC0000 0x100>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; @@ -345,7 +349,7 @@ status = "disabled"; }; - i2c_7: i2c@12CD0000 { + i2c_7: i2c@12cd0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CD0000 0x100>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; @@ -358,7 +362,7 @@ status = "disabled"; }; - i2c_8: i2c@12CE0000 { + i2c_8: i2c@12ce0000 { compatible = "samsung,s3c2440-hdmiphy-i2c"; reg = <0x12CE0000 0x1000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; @@ -374,7 +378,7 @@ }; }; - i2c_9: i2c@121D0000 { + i2c_9: i2c@121d0000 { compatible = "samsung,exynos5-sata-phy-i2c"; reg = <0x121D0000 0x100>; #address-cells = <1>; @@ -495,9 +499,10 @@ samsung,idma-addr = <0x03000000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + power-domains = <&pd_mau>; }; - i2s1: i2s@12D60000 { + i2s1: i2s@12d60000 { compatible = "samsung,s3c6410-i2s"; status = "disabled"; reg = <0x12D60000 0x100>; @@ -508,9 +513,10 @@ clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; + power-domains = <&pd_mau>; }; - i2s2: i2s@12D70000 { + i2s2: i2s@12d70000 { compatible = "samsung,s3c6410-i2s"; status = "disabled"; reg = <0x12D70000 0x100>; @@ -521,6 +527,7 @@ clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; + power-domains = <&pd_mau>; }; usb_dwc3 { @@ -596,7 +603,7 @@ interrupt-parent = <&gic>; ranges; - pdma0: pdma@121A0000 { + pdma0: pdma@121a0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; @@ -607,7 +614,7 @@ #dma-requests = <32>; }; - pdma1: pdma@121B0000 { + pdma1: pdma@121b0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; @@ -629,7 +636,7 @@ #dma-requests = <1>; }; - mdma1: mdma@11C10000 { + mdma1: mdma@11c10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; @@ -696,7 +703,7 @@ status = "disabled"; }; - hdmicec: cec@101B0000 { + hdmicec: cec@101b0000 { compatible = "samsung,s5p-cec"; reg = <0x101B0000 0x200>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -727,7 +734,7 @@ #phy-cells = <0>; }; - adc: adc@12D10000 { + adc: adc@12d10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -739,15 +746,7 @@ status = "disabled"; }; - sss@10830000 { - compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x300>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SSS>; - clock-names = "secss"; - }; - - sysmmu_g2d: sysmmu@10A60000 { + sysmmu_g2d: sysmmu@10a60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x10A60000 0x1000>; interrupt-parent = <&combiner>; @@ -779,7 +778,7 @@ #iommu-cells = <0>; }; - sysmmu_rotator: sysmmu@11D40000 { + sysmmu_rotator: sysmmu@11d40000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11D40000 0x1000>; interrupt-parent = <&combiner>; @@ -789,7 +788,7 @@ #iommu-cells = <0>; }; - sysmmu_jpeg: sysmmu@11F20000 { + sysmmu_jpeg: sysmmu@11f20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11F20000 0x1000>; interrupt-parent = <&combiner>; @@ -820,7 +819,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc_fd: sysmmu@132A0000 { + sysmmu_fimc_fd: sysmmu@132a0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x132A0000 0x1000>; interrupt-parent = <&combiner>; @@ -850,7 +849,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc_mcuctl: sysmmu@132B0000 { + sysmmu_fimc_mcuctl: sysmmu@132b0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x132B0000 0x1000>; interrupt-parent = <&combiner>; @@ -860,7 +859,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc_odc: sysmmu@132C0000 { + sysmmu_fimc_odc: sysmmu@132c0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x132C0000 0x1000>; interrupt-parent = <&combiner>; @@ -870,7 +869,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc_dis0: sysmmu@132D0000 { + sysmmu_fimc_dis0: sysmmu@132d0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x132D0000 0x1000>; interrupt-parent = <&combiner>; @@ -890,7 +889,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc_3dnr: sysmmu@132F0000 { + sysmmu_fimc_3dnr: sysmmu@132f0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x132F0000 0x1000>; interrupt-parent = <&combiner>; @@ -900,7 +899,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc_lite0: sysmmu@13C40000 { + sysmmu_fimc_lite0: sysmmu@13c40000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13C40000 0x1000>; interrupt-parent = <&combiner>; @@ -911,7 +910,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc_lite1: sysmmu@13C50000 { + sysmmu_fimc_lite1: sysmmu@13c50000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13C50000 0x1000>; interrupt-parent = <&combiner>; @@ -922,7 +921,7 @@ #iommu-cells = <0>; }; - sysmmu_gsc0: sysmmu@13E80000 { + sysmmu_gsc0: sysmmu@13e80000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13E80000 0x1000>; interrupt-parent = <&combiner>; @@ -933,7 +932,7 @@ #iommu-cells = <0>; }; - sysmmu_gsc1: sysmmu@13E90000 { + sysmmu_gsc1: sysmmu@13e90000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13E90000 0x1000>; interrupt-parent = <&combiner>; @@ -944,7 +943,7 @@ #iommu-cells = <0>; }; - sysmmu_gsc2: sysmmu@13EA0000 { + sysmmu_gsc2: sysmmu@13ea0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13EA0000 0x1000>; interrupt-parent = <&combiner>; @@ -955,7 +954,7 @@ #iommu-cells = <0>; }; - sysmmu_gsc3: sysmmu@13EB0000 { + sysmmu_gsc3: sysmmu@13eb0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13EB0000 0x1000>; interrupt-parent = <&combiner>; @@ -1024,6 +1023,13 @@ iommus = <&sysmmu_fimd1>; }; +&g2d { + iommus = <&sysmmu_g2d>; + clocks = <&clock CLK_G2D>; + clock-names = "fimg2d"; + status = "okay"; +}; + &i2c_0 { clocks = <&clock CLK_I2C0>; clock-names = "i2c"; @@ -1052,6 +1058,11 @@ pinctrl-0 = <&i2c3_bus>; }; +&prng { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + &pwm { clocks = <&clock CLK_PWM>; clock-names = "timers"; @@ -1092,4 +1103,14 @@ dma-names = "rx", "tx"; }; +&sss { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + +&trng { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + #include "exynos5250-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi index 1b911a219a27..b1edb20b789e 100644 --- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source * @@ -6,11 +7,7 @@ * * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 73b7cdd5f522..442eb0353f29 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG XYREF5260 board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos5260.dtsi" diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 5e88c9645975..55167850619c 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS5260 SoC device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/clock/exynos5260-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -106,13 +103,13 @@ #clock-cells = <1>; }; - clock_g2d: clock-controller@10A00000 { + clock_g2d: clock-controller@10a00000 { compatible = "samsung,exynos5260-clock-g2d"; reg = <0x10A00000 0x10000>; #clock-cells = <1>; }; - clock_mif: clock-controller@10CE0000 { + clock_mif: clock-controller@10ce0000 { compatible = "samsung,exynos5260-clock-mif"; reg = <0x10CE0000 0x10000>; #clock-cells = <1>; @@ -130,25 +127,25 @@ #clock-cells = <1>; }; - clock_fsys: clock-controller@122E0000 { + clock_fsys: clock-controller@122e0000 { compatible = "samsung,exynos5260-clock-fsys"; reg = <0x122E0000 0x10000>; #clock-cells = <1>; }; - clock_aud: clock-controller@128C0000 { + clock_aud: clock-controller@128c0000 { compatible = "samsung,exynos5260-clock-aud"; reg = <0x128C0000 0x10000>; #clock-cells = <1>; }; - clock_isp: clock-controller@133C0000 { + clock_isp: clock-controller@133c0000 { compatible = "samsung,exynos5260-clock-isp"; reg = <0x133C0000 0x10000>; #clock-cells = <1>; }; - clock_gscl: clock-controller@13F00000 { + clock_gscl: clock-controller@13f00000 { compatible = "samsung,exynos5260-clock-gscl"; reg = <0x13F00000 0x10000>; #clock-cells = <1>; @@ -179,7 +176,7 @@ reg = <0x10000000 0x100>; }; - mct: mct@100B0000 { + mct: mct@100b0000 { compatible = "samsung,exynos4210-mct"; reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; @@ -198,7 +195,7 @@ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; }; - cci: cci@10F00000 { + cci: cci@10f00000 { compatible = "arm,cci-400"; #address-cells = <1>; #size-cells = <1>; @@ -236,18 +233,18 @@ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; }; - pinctrl_2: pinctrl@128B0000 { + pinctrl_2: pinctrl@128b0000 { compatible = "samsung,exynos5260-pinctrl"; reg = <0x128B0000 0x1000>; interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; }; - pmu_system_controller: system-controller@10D50000 { + pmu_system_controller: system-controller@10d50000 { compatible = "samsung,exynos5260-pmu", "syscon"; reg = <0x10D50000 0x10000>; }; - uart0: serial@12C00000 { + uart0: serial@12c00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; @@ -256,7 +253,7 @@ status = "disabled"; }; - uart1: serial@12C10000 { + uart1: serial@12c10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; @@ -265,7 +262,7 @@ status = "disabled"; }; - uart2: serial@12C20000 { + uart2: serial@12c20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index a45eaae33f8f..a2046f5f998c 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel Odroid XU board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com * Copyright (c) 2016 Krzysztof Kozlowski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index ff46a1c27182..369a8a7f2105 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Exynos5410 SoC pin-mux and pin-config device tree source * * Copyright (c) 2013 Hardkernel Co., Ltd. * http://www.hardkernel.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 25f21e9e7d58..8fc8c841d34b 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG SMDK5410 board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos5410.dtsi" diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 06713ec86f0d..1886aa00b2db 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS5410 SoC device tree source * @@ -7,10 +8,6 @@ * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file. * EXYNOS5410 based board files can include this file and provide * values for board specfic bindings. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos54xx.dtsi" @@ -264,6 +261,11 @@ }; }; +&arm_a15_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + status = "okay"; +}; + &i2c_0 { clocks = <&clock CLK_I2C0>; clock-names = "i2c"; @@ -325,6 +327,11 @@ clock-names = "fin_pll", "mct"; }; +&prng { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + &pwm { clocks = <&clock CLK_PWM>; clock-names = "timers"; @@ -333,7 +340,6 @@ &rtc { clocks = <&clock CLK_RTC>; clock-names = "rtc"; - interrupt-parent = <&pmu_system_controller>; status = "disabled"; }; @@ -379,6 +385,11 @@ 3 0 0x07000000 0x20000>; }; +&trng { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + &usbdrd3_0 { clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index bc78575d8a4d..cdda614e417e 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5420 based Arndale Octa board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos5420.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index d7d703aa1699..123f0cef658d 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS5420 SoC cpu device tree source * @@ -14,10 +15,6 @@ * booting cluster (big or LITTLE) is chosen by IROM code by reading * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting * from the LITTLE: Cortex-A7. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { @@ -132,3 +129,13 @@ }; }; }; + +&arm_a7_pmu { + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + status = "okay"; +}; + +&arm_a15_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 38af8769711c..5a76ed77dda1 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Google Peach Pit Rev 6+ board device tree source * * Copyright (c) 2014 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 65aa0e300c23..dda8ca2d2324 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source * @@ -6,11 +7,7 @@ * * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 310d8637ce9f..831c7336f237 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG SMDK5420 board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos5420.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi index c8771c660550..fbc77cb58473 100644 --- a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi +++ b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos5420 TMU sensor configuration * * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <dt-bindings/thermal/thermal_exynos.h> diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi index 2180a0152c9b..a67a380717ec 100644 --- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for default Exynos5420 thermal zone definition * * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ polling-delay-passive = <0>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 8aa2cc7aa125..2f3cb2a97f71 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS5420 SoC device tree source * @@ -7,10 +8,6 @@ * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file. * EXYNOS5420 based board files can include this file and provide * values for board specfic bindings. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos54xx.dtsi" @@ -188,6 +185,7 @@ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; + power-domains = <&mau_pd>; }; mfc: codec@11000000 { @@ -237,37 +235,37 @@ status = "disabled"; }; - nocp_mem0_0: nocp@10CA1000 { + nocp_mem0_0: nocp@10ca1000 { compatible = "samsung,exynos5420-nocp"; reg = <0x10CA1000 0x200>; status = "disabled"; }; - nocp_mem0_1: nocp@10CA1400 { + nocp_mem0_1: nocp@10ca1400 { compatible = "samsung,exynos5420-nocp"; reg = <0x10CA1400 0x200>; status = "disabled"; }; - nocp_mem1_0: nocp@10CA1800 { + nocp_mem1_0: nocp@10ca1800 { compatible = "samsung,exynos5420-nocp"; reg = <0x10CA1800 0x200>; status = "disabled"; }; - nocp_mem1_1: nocp@10CA1C00 { + nocp_mem1_1: nocp@10ca1c00 { compatible = "samsung,exynos5420-nocp"; reg = <0x10CA1C00 0x200>; status = "disabled"; }; - nocp_g3d_0: nocp@11A51000 { + nocp_g3d_0: nocp@11a51000 { compatible = "samsung,exynos5420-nocp"; reg = <0x11A51000 0x200>; status = "disabled"; }; - nocp_g3d_1: nocp@11A51400 { + nocp_g3d_1: nocp@11a51400 { compatible = "samsung,exynos5420-nocp"; reg = <0x11A51400 0x200>; status = "disabled"; @@ -309,7 +307,7 @@ label = "MSC"; }; - disp_pd: power-domain@100440C0 { + disp_pd: power-domain@100440c0 { compatible = "samsung,exynos4210-pd"; reg = <0x100440C0 0x20>; #power-domain-cells = <0>; @@ -322,6 +320,13 @@ clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1"; }; + mau_pd: power-domain@100440e0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440E0 0x20>; + #power-domain-cells = <0>; + label = "MAU"; + }; + pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13400000 0x1000>; @@ -356,6 +361,7 @@ compatible = "samsung,exynos5420-pinctrl"; reg = <0x03860000 0x1000>; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mau_pd>; }; amba { @@ -374,9 +380,10 @@ #dma-cells = <1>; #dma-channels = <6>; #dma-requests = <16>; + power-domains = <&mau_pd>; }; - pdma0: pdma@121A0000 { + pdma0: pdma@121a0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; @@ -387,7 +394,7 @@ #dma-requests = <32>; }; - pdma1: pdma@121B0000 { + pdma1: pdma@121b0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; @@ -409,7 +416,7 @@ #dma-requests = <1>; }; - mdma1: mdma@11C10000 { + mdma1: mdma@11c10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; @@ -446,10 +453,11 @@ samsung,idma-addr = <0x03000000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + power-domains = <&mau_pd>; status = "disabled"; }; - i2s1: i2s@12D60000 { + i2s1: i2s@12d60000 { compatible = "samsung,exynos5420-i2s"; reg = <0x12D60000 0x100>; dmas = <&pdma1 12 @@ -465,7 +473,7 @@ status = "disabled"; }; - i2s2: i2s@12D70000 { + i2s2: i2s@12d70000 { compatible = "samsung,exynos5420-i2s"; reg = <0x12D70000 0x100>; dmas = <&pdma0 12 @@ -554,7 +562,7 @@ status = "disabled"; }; - adc: adc@12D10000 { + adc: adc@12d10000 { compatible = "samsung,exynos-adc-v2"; reg = <0x12D10000 0x100>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -566,7 +574,7 @@ status = "disabled"; }; - hsi2c_8: i2c@12E00000 { + hsi2c_8: i2c@12e00000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E00000 0x1000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; @@ -579,7 +587,7 @@ status = "disabled"; }; - hsi2c_9: i2c@12E10000 { + hsi2c_9: i2c@12e10000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E10000 0x1000>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; @@ -592,7 +600,7 @@ status = "disabled"; }; - hsi2c_10: i2c@12E20000 { + hsi2c_10: i2c@12e20000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E20000 0x1000>; interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; @@ -618,13 +626,14 @@ samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; power-domains = <&disp_pd>; + #sound-dai-cells = <0>; }; - hdmiphy: hdmiphy@145D0000 { + hdmiphy: hdmiphy@145d0000 { reg = <0x145D0000 0x20>; }; - hdmicec: cec@101B0000 { + hdmicec: cec@101b0000 { compatible = "samsung,s5p-cec"; reg = <0x101B0000 0x200>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -649,7 +658,7 @@ status = "disabled"; }; - rotator: rotator@11C00000 { + rotator: rotator@11c00000 { compatible = "samsung,exynos5250-rotator"; reg = <0x11C00000 0x64>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; @@ -678,7 +687,7 @@ iommus = <&sysmmu_gscl1>; }; - jpeg_0: jpeg@11F50000 { + jpeg_0: jpeg@11f50000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F50000 0x1000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; @@ -687,7 +696,7 @@ iommus = <&sysmmu_jpeg0>; }; - jpeg_1: jpeg@11F60000 { + jpeg_1: jpeg@11f60000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F60000 0x1000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; @@ -1349,6 +1358,13 @@ iommu-names = "m0", "m1"; }; +&g2d { + iommus = <&sysmmu_g2dr>, <&sysmmu_g2dw>; + clocks = <&clock CLK_G2D>; + clock-names = "fimg2d"; + status = "okay"; +}; + &i2c_0 { clocks = <&clock CLK_I2C0>; clock-names = "i2c"; @@ -1410,6 +1426,11 @@ clock-names = "fin_pll", "mct"; }; +&prng { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + &pwm { clocks = <&clock CLK_PWM>; clock-names = "timers"; @@ -1455,6 +1476,11 @@ clock-names = "secss"; }; +&trng { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + &usbdrd3_0 { clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index ec01d8020c2d..c593809c7f08 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS5422 SoC cpu device tree source * @@ -13,10 +14,6 @@ * booting cluster (big or LITTLE) is chosen by IROM code by reading * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting * from the LITTLE: Cortex-A7. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { @@ -131,3 +128,13 @@ }; }; }; + +&arm_a7_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + status = "okay"; +}; + +&arm_a15_pmu { + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index a5b8d0f0877e..d31249f25ccf 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -1,14 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel Odroid XU3/XU4/HC1 boards core device tree source * * Copyright (c) 2017 Marek Szyprowski * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/clock/samsung,s2mps11.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -233,8 +230,8 @@ ldo15_reg: LDO15 { regulator-name = "vdd_ldo15"; - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -246,7 +243,7 @@ }; ldo17_reg: LDO17 { - regulator-name = "tsp_avdd"; + regulator-name = "vdd_ldo17"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index fb8e8ae776e9..8f332be143f7 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -1,14 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel Odroid HC1 board device tree source * * Copyright (c) 2017 Marek Szyprowski * Copyright (c) 2017 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos5422-odroid-core.dtsi" diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index da3141a307d5..03611d50c5a9 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -1,27 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Hardkernel Odroid XU3 Audio Codec device tree source + * Hardkernel Odroid XU3 audio subsystem device tree source * * Copyright (c) 2015 Krzysztof Kozlowski * Copyright (c) 2014 Collabora Ltd. * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/sound/samsung-i2s.h> / { sound: sound { - compatible = "simple-audio-card"; + compatible = "samsung,odroid-xu3-audio"; + model = "Odroid-XU3"; - simple-audio-card,name = "Odroid-XU3"; - simple-audio-card,widgets = + samsung,audio-widgets = "Headphone", "Headphone Jack", "Speakers", "Speakers"; - simple-audio-card,routing = + samsung,audio-routing = "Headphone Jack", "HPL", "Headphone Jack", "HPR", "Headphone Jack", "MICBIAS", @@ -29,31 +26,47 @@ "Speakers", "SPKL", "Speakers", "SPKR"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&link0_codec>; - simple-audio-card,frame-master = <&link0_codec>; + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>, + <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MOUT_USER_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_DOUT_I2S>; + + assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>, + <&clock CLK_FOUT_EPLL>, + <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; - simple-audio-card,cpu { + assigned-clock-rates = <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <196608001>, + <(196608002 / 2)>, + <196608000>; + + cpu { sound-dai = <&i2s0 0>; - system-clock-frequency = <19200000>; }; - - link0_codec: simple-audio-card,codec { - sound-dai = <&max98090>; - clocks = <&i2s0 CLK_I2S_CDCLK>; + codec { + sound-dai = <&hdmi>, <&max98090>; }; }; }; &clock_audss { - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FIN_PLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <19200000>; + assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>, + <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <(196608000 / 256)>, + <196608000>; }; &hsi2c_5 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 445c6c5a1300..96e281c0a118 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel Odroid XU3 board device tree source * @@ -6,11 +7,7 @@ * Copyright (c) 2014 Collabora Ltd. * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com> * Anand Moon <linux.amoon@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/input/input.h> #include "exynos5422-odroid-core.dtsi" diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 03fa88c45426..0db935f2b836 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel Odroid XU3-Lite board device tree source * @@ -5,11 +6,7 @@ * Copyright (c) 2014 Collabora Ltd. * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 9ed6564acfb0..0322f281912c 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -1,14 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel Odroid XU3 board device tree source * * Copyright (c) 2014 Collabora Ltd. * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index 2faf88627a48..4a30cc849b00 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel Odroid XU4 board device tree source * @@ -5,13 +6,10 @@ * Copyright (c) 2014 Collabora Ltd. * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos5422-odroidxu3-common.dtsi" / { @@ -30,6 +28,57 @@ linux,default-trigger = "heartbeat"; }; }; + + sound: sound { + compatible = "samsung,odroid-xu3-audio"; + model = "Odroid-XU4"; + + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>, + <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MOUT_USER_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_DOUT_I2S>; + + assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>, + <&clock CLK_FOUT_EPLL>, + <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + + assigned-clock-rates = <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <196608001>, + <(196608002 / 2)>, + <196608000>; + + cpu { + sound-dai = <&i2s0 0>; + }; + + codec { + sound-dai = <&hdmi>; + }; + }; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>, + <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <(196608000 / 256)>, + <196608000>; +}; + +&i2s0 { + status = "okay"; }; &pwm { diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index ad6f533b3f40..c4b8392d1ae1 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG SD5v1 board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos5440.dtsi" diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index 7eafad333bdb..a33c4fc29ae5 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG SSDK5440 board device tree source * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos5440.dtsi" diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi index 7b2fba0ae92b..0421c3d42905 100644 --- a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi +++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos5440 TMU sensor configuration * * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <dt-bindings/thermal/thermal_exynos.h> diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi index 356e963edf11..a2b04fed7d0b 100644 --- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for default Exynos5440 thermal zone definition * * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ polling-delay-passive = <0>; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 9c3c75ae5e48..fce9e26b5930 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS5440 SoC device tree source * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/clock/exynos5440.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -35,7 +32,7 @@ #clock-cells = <1>; }; - gic: interrupt-controller@2E0000 { + gic: interrupt-controller@2e0000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -108,7 +105,7 @@ >; }; - serial_0: serial@B0000 { + serial_0: serial@b0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -116,7 +113,7 @@ clock-names = "uart", "clk_uart_baud0"; }; - serial_1: serial@C0000 { + serial_1: serial@c0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; @@ -124,7 +121,7 @@ clock-names = "uart", "clk_uart_baud0"; }; - spi_0: spi@D0000 { + spi_0: spi@d0000 { compatible = "samsung,exynos5440-spi"; reg = <0xD0000 0x100>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; @@ -136,7 +133,7 @@ clock-names = "spi", "spi_busclk0"; }; - pin_ctrl: pinctrl@E0000 { + pin_ctrl: pinctrl@e0000 { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, @@ -168,7 +165,7 @@ }; }; - i2c@F0000 { + i2c@f0000 { compatible = "samsung,exynos5440-i2c"; reg = <0xF0000 0x1000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; @@ -233,7 +230,7 @@ #include "exynos5440-tmu-sensor-conf.dtsi" }; - tmuctrl_1: tmuctrl@16011C { + tmuctrl_1: tmuctrl@16011c { compatible = "samsung,exynos5440-tmu"; reg = <0x16011C 0x230>, <0x160368 0x10>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi index 0ed30206625c..56acd832f0b3 100644 --- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi +++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Hardkernel Odroid XU/XU3 LED device tree source * @@ -5,11 +6,7 @@ * Copyright (c) 2014 Collabora Ltd. * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index a5007f182bc4..de26e5ee0d2d 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos54xx SoC series common device tree source * @@ -8,10 +9,6 @@ * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific * Exynos 54xx SoCs should include this file and customize it further * (e.g. with clocks). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos5.dtsi" @@ -29,6 +26,26 @@ }; soc: soc { + arm_a7_pmu: arm-a7-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + arm_a15_pmu: arm-a15-pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&combiner>; + interrupts = <1 2>, + <7 0>, + <16 6>, + <19 2>; + status = "disabled"; + }; + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; @@ -79,12 +96,6 @@ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; - sss: sss@10830000 { - compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x300>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - }; - /* i2c_0-3 are defined in exynos5.dtsi */ hsi2c_4: i2c@12ca0000 { compatible = "samsung,exynos5250-hsi2c"; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 6a9fdc0760f0..a7adbdc2f0c0 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -18,6 +18,18 @@ ahb { apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + dbgu: serial@fffff200 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index e75e2d44371c..cadde92bc6b5 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -45,6 +45,47 @@ }; }; + vdisp: regulator { + compatible = "regulator-fixed"; + regulator-name = "display-power"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + /* Collides with LCD E */ + gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Collides with IDE pins, that's cool (we do not use them) */ + gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>; + /* Collides with pflash CE1, not so cool */ + cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + panel: display@0 { + compatible = "dlink,dir-685-panel", "ilitek,ili9322"; + reg = <0>; + /* 50 ns min period = 20 MHz */ + spi-max-frequency = <20000000>; + spi-cpol; /* Clock active low */ + vcc-supply = <&vdisp>; + iovcc-supply = <&vdisp>; + vci-supply = <&vdisp>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + leds { compatible = "gpio-leds"; led-wps { @@ -99,8 +140,8 @@ gpio-i2c { compatible = "i2c-gpio"; /* Collides with ICE */ - gpios = <&gpio0 5 0>, /* SDA */ - <&gpio0 6 0>; /* SCL */ + sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; @@ -115,7 +156,16 @@ soc { flash@30000000 { - status = "okay"; + /* + * Flash access is by default disabled, because it + * collides with the Chip Enable signal for the display + * panel, that reuse the parallel flash Chip Select 1 + * (CS1). Enabling flash makes graphics stop working. + * + * We might be able to hack around this by letting + * GPIO poke around in the flash controller registers. + */ + /* status = "okay"; */ /* 32MB of flash */ reg = <0x30000000 0x02000000>; @@ -242,5 +292,16 @@ ata@63000000 { status = "okay"; }; + + display-controller@6a000000 { + status = "okay"; + + port@0 { + reg = <0>; + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts new file mode 100644 index 000000000000..08568ce24d06 --- /dev/null +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + model = "D-Link DNS-313 1-Bay Network Storage Enclosure"; + compatible = "dlink,dir-313", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + stdout-path = "uart0:19200n8"; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button-esc { + debounce_interval = <50>; + wakeup-source; + linux,code = <KEY_ESC>; + label = "reset"; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-power { + label = "dns313:blue:power"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + led-disk-blue { + label = "dns313:blue:disk"; + gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-disk-green { + label = "dns313:green:disk"; + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "ide-disk"; + /* Ideally should activate while reading */ + }; + led-disk-red { + label = "dns313:red:disk"; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + /* Ideally should activate while writing */ + }; + }; + + /* + * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM. + */ + fan0: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, + <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>; + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; + }; + + + /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */ + gpio-i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + g751: temperature-sensor@48 { + compatible = "gmt,g751"; + reg = <0x48>; + #thermal-sensor-cells = <0>; + }; + }; + + thermal-zones { + chassis-thermal { + /* Poll every 20 seconds */ + polling-delay = <20000>; + /* Poll every 2nd second when cooling */ + polling-delay-passive = <2000>; + + thermal-sensors = <&g751>; + + /* Tripping points from the fan.script in the rootfs */ + trips { + chassis_alert0: chassis-alert0 { + /* At 43 degrees turn on low speed */ + temperature = <43000>; + hysteresis = <3000>; + type = "active"; + }; + chassis_alert1: chassis-alert1 { + /* At 47 degrees turn on high speed */ + temperature = <47000>; + hysteresis = <3000>; + type = "active"; + }; + chassis_crit: chassis-crit { + /* Just shut down at 60 degrees */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&chassis_alert0>; + cooling-device = <&fan0 1 1>; + }; + map1 { + trip = <&chassis_alert1>; + cooling-device = <&fan0 2 2>; + }; + }; + }; + }; + + mdio0: ethernet-phy { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Realtek RTL8211B Gigabit ethernet transceiver */ + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + soc { + flash@30000000 { + status = "okay"; + /* 512KB of flash */ + reg = <0x30000000 0x00080000>; + + /* + * This "RedBoot" is the Storlink derivative. + */ + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "MTD1"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "MTD2"; + reg = <0x00060000 0x00020000>; + read-only; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + /* + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = + /* Used by LEDs conflicts ICE */ + "gpio0bgrp", + /* Used by ? conflicts ICE */ + "gpio0cgrp", + /* + * Used by fan & G751, conflicts LPC, + * UART modem lines, SSP + */ + "gpio0egrp", + /* Used by G751 */ + "gpio0fgrp", + /* Used by MDIO */ + "gpio0igrp"; + }; + }; + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + /* Used by "reset" button */ + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + /* + * In the vendor Linux tree, these values are set for the C3 + * version of the SL3512 ASIC with the comment "benson suggest" + */ + conf0 { + pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV"; + skew-delay = <0>; + }; + conf1 { + pins = "T8 GMAC0 RXC"; + skew-delay = <10>; + }; + conf2 { + pins = "T11 GMAC1 RXC"; + skew-delay = <15>; + }; + conf3 { + pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf4 { + pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC"; + skew-delay = <10>; + }; + conf5 { + /* The data lines all have default skew */ + pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", + "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", + "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", + "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", + "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", + "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; + skew-delay = <7>; + }; + conf6 { + pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", + "R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; + skew-delay = <5>; + }; + /* Set up drive strength on GMAC0 to 16 mA */ + conf7 { + groups = "gmii_gmac0_grp"; + drive-strength = <16>; + }; + }; + }; + }; + + sata: sata@46000000 { + /* The ROM uses this muxmode */ + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; + + ata@63000000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index d6a22e677c7a..8bbb6f85d161 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -64,6 +64,19 @@ }; }; + mdio0: ethernet-phy { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + soc { flash@30000000 { status = "okay"; @@ -116,6 +129,50 @@ groups = "gpio1dgrp"; }; }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + /* Settings come from OpenWRT */ + conf0 { + pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV"; + skew-delay = <0>; + }; + conf1 { + pins = "T8 GMAC0 RXC", "T11 GMAC1 RXC"; + skew-delay = <15>; + }; + conf2 { + pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf3 { + pins = "V7 GMAC0 TXC"; + skew-delay = <11>; + }; + conf4 { + pins = "P10 GMAC1 TXC"; + skew-delay = <10>; + }; + conf5 { + /* The data lines all have default skew */ + pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", + "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", + "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", + "R7 GMAC0 TXD2", "P7 GMAC0 TXD3", + "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", + "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", + "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", + "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; + skew-delay = <7>; + }; + /* Set up drive strength on GMAC0 to 16 mA */ + conf6 { + groups = "gmii_gmac0_grp"; + drive-strength = <16>; + }; + }; }; }; @@ -130,6 +187,18 @@ pinctrl-0 = <&gpio1_default_pins>; }; + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; + ata@63000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts index 500057b6570e..15f20178642c 100644 --- a/arch/arm/boot/dts/gemini-rut1xx.dts +++ b/arch/arm/boot/dts/gemini-rut1xx.dts @@ -58,6 +58,19 @@ }; }; + mdio0: ethernet-phy { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + soc { flash@30000000 { status = "okay"; @@ -101,5 +114,17 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio1_default_pins>; }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts index b413fd12c5ba..b4ec9ad85d72 100644 --- a/arch/arm/boot/dts/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -69,6 +69,19 @@ }; }; + mdio0: ethernet-phy { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + soc { flash@30000000 { status = "okay"; @@ -125,5 +138,39 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio0_default_pins>; }; + + pci@50000000 { + status = "okay"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts index 3ba710538662..6d25bcc046e7 100644 --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -69,6 +69,24 @@ }; }; + mdio0: ethernet-phy { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@3 { + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + soc { flash@30000000 { status = "okay"; @@ -118,6 +136,13 @@ "gpio0bgrp"; }; }; + pinctrl-gmii { + /* This platform use both the ethernet ports */ + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + }; }; }; @@ -125,5 +150,40 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio0_default_pins>; }; + + pci@50000000 { + status = "okay"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index cb5c925bd597..0568baca500a 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -114,9 +114,16 @@ }; }; gmii_default_pins: pinctrl-gmii { + /* + * Only activate GMAC0 by default since + * GMAC1 will overlap with 8 GPIO lines + * gpio2a, gpio2b. Overlay groups with + * "gmii_gmac0_grp", "gmii_gmac1_grp" for + * both ethernet interfaces. + */ mux { function = "gmii"; - groups = "gmiigrp"; + groups = "gmii_gmac0_grp"; }; }; pci_default_pins: pinctrl-pci { @@ -316,6 +323,41 @@ }; }; + ethernet@60000000 { + compatible = "cortina,gemini-ethernet"; + reg = <0x60000000 0x4000>, /* Global registers, queue */ + <0x60004000 0x2000>, /* V-bit */ + <0x60006000 0x2000>; /* A-bit */ + pinctrl-names = "default"; + pinctrl-0 = <&gmii_default_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gmac0: ethernet-port@0 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ + <0x6000a000 0x2000>; /* Port 0 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC0>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; + clock-names = "PCLK"; + }; + + gmac1: ethernet-port@1 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ + <0x6000e000 0x2000>; /* Port 1 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC1>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; + clock-names = "PCLK"; + }; + }; + ata@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 09ce8b81fafa..9445f8e1473c 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -122,7 +122,7 @@ }; can1: can@43f88000 { - compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx25-flexcan"; reg = <0x43f88000 0x4000>; interrupts = <43>; clocks = <&clks 75>, <&clks 75>; @@ -131,7 +131,7 @@ }; can2: can@43f8c000 { - compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx25-flexcan"; reg = <0x43f8c000 0x4000>; interrupts = <44>; clocks = <&clks 76>, <&clks 76>; @@ -628,11 +628,13 @@ usbphy0: usb-phy@0 { reg = <0>; compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; usbphy1: usb-phy@1 { reg = <1>; compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 96f442ba6d22..2a140c8ae6d2 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -30,6 +30,7 @@ reg = <0>; clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index 2a9198f99a8d..2ed2d73b087e 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -63,6 +63,7 @@ vcc-supply = <®_5v0>; clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index c973c5d91875..c9095b7654c6 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -53,6 +53,7 @@ vcc-supply = <&sw3_reg>; clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts new file mode 100644 index 000000000000..1e391c9f1b7a --- /dev/null +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2016 Savoir-Faire Linux + * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx28.dtsi" +#include "dt-bindings/gpio/gpio.h" + +/ { + + model = "Technologic Systems i.MX28 TS-4600"; + compatible = "technologic,imx28-ts4600", "fsl,imx28"; + + memory { + reg = <0x40000000 0x10000000>; /* 256MB */ + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_sck_cfg + &en_sd_pwr>; + broken-cd = <1>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + + en_sd_pwr: en-sd-pwr@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + }; + }; + + apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&gpio3 28 GPIO_ACTIVE_LOW>; + }; + +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 2f4ebe0318d3..e52e05c0fe56 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1038,7 +1038,7 @@ }; can0: can@80032000 { - compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx28-flexcan"; reg = <0x80032000 0x2000>; interrupts = <8>; clocks = <&clks 58>, <&clks 58>; @@ -1047,7 +1047,7 @@ }; can1: can@80034000 { - compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx28-flexcan"; reg = <0x80034000 0x2000>; interrupts = <9>; clocks = <&clks 59>, <&clks 59>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 6d5e6a60bee7..e08c0c193767 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -303,7 +303,7 @@ }; can1: can@53fe4000 { - compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx35-flexcan"; reg = <0x53fe4000 0x1000>; clocks = <&clks 33>, <&clks 33>; clock-names = "ipg", "per"; @@ -312,7 +312,7 @@ }; can2: can@53fe8000 { - compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx35-flexcan"; reg = <0x53fe8000 0x1000>; clocks = <&clks 34>, <&clks 34>; clock-names = "ipg", "per"; @@ -402,11 +402,13 @@ usbphy0: usb-phy@0 { reg = <0>; compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; usbphy1: usb-phy@1 { reg = <1>; compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 2a694c5cc8ae..4ac5ab614a7f 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,18 +25,41 @@ reg = <0x90000000 0x20000000>; }; - clocks { - ckih1 { - clock-frequency = <22579200>; - }; + ckih1 { + clock-frequency = <22579200>; + }; - clk_26M: codec_clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <26000000>; - gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; - }; + clk_osc: clk-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clk_osc_gate: clk-osc-gate { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clk26mhz_osc>; + clocks = <&clk_osc>; + #clock-cells = <0>; + enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + clk_audio: clk-audio { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clk26mhz_audio>; + clocks = <&clk_osc_gate>; + #clock-cells = <0>; + enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; + + clk_usb: clk-usb { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clk26mhz_usb>; + clocks = <&clk_osc_gate>; + #clock-cells = <0>; + enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; display1: disp1 { @@ -162,9 +185,11 @@ usbh1phy: usbh1phy@0 { compatible = "usb-nop-xceiv"; reg = <0>; - clocks = <&clks IMX5_CLK_DUMMY>; + clocks = <&clk_usb>; clock-names = "main_clk"; reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; }; }; @@ -240,6 +265,10 @@ regulator-max-microvolt = <3150000>; }; + vusb_reg: vusb { + regulator-boot-on; + }; + vusb2_reg: vusb2 { regulator-min-microvolt = <2400000>; regulator-max-microvolt = <2775000>; @@ -339,10 +368,8 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_clkcodec>; reg = <0x0a>; - clocks = <&clk_26M>; + clocks = <&clk_audio>; VDDA-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; }; @@ -413,6 +440,10 @@ status = "okay"; }; +&usbphy0 { + vcc-supply = <&vusb_reg>; +}; + &usbotg { dr_mode = "otg"; disable-over-current; @@ -431,9 +462,21 @@ >; }; - pinctrl_clkcodec: clkcodecgrp { + pinctrl_clk26mhz_audio: clk26mhzaudiocgrp { + fsl,pins = < + MX51_PAD_CSPI1_RDY__GPIO4_26 0x85 + >; + }; + + pinctrl_clk26mhz_osc: clk26mhzoscgrp { + fsl,pins = < + MX51_PAD_DI1_PIN12__GPIO3_1 0x85 + >; + }; + + pinctrl_clk26mhz_usb: clk26mhzusbgrp { fsl,pins = < - MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 + MX51_PAD_EIM_D17__GPIO2_1 0x85 >; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 1305b05c7ed9..b3d952f37cdc 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -94,6 +94,7 @@ clocks = <&clks IMX5_CLK_USB_PHY_GATE>; clock-names = "main_clk"; clock-frequency = <19200000>; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 564233e97412..f59b02bae68d 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -149,18 +149,18 @@ #size-cells = <1>; ranges = <0 0 0 0x1d000>; - syscon: syscon@b0010000 { + syscon: syscon@10000 { compatible = "syscon", "simple-mfd"; reg = <0x10000 0x3d>; reg-io-width = <2>; - wdt@e { + wdt { compatible = "technologic,ts4800-wdt"; syscon = <&syscon 0xe>; }; }; - touchscreen { + touchscreen@12000 { compatible = "technologic,ts4800-ts"; reg = <0x12000 0x1000>; syscon = <&syscon 0x10 6>; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 49be0e1c812d..5306b78de0ca 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -242,7 +242,7 @@ sound { compatible = "simple-audio-card"; - simple-audio-card,name = "RDU1 audio"; + simple-audio-card,name = "Front"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound_codec>; simple-audio-card,frame-master = <&sound_codec>; @@ -251,7 +251,7 @@ simple-audio-card,routing = "Headphone Jack", "HPLEFT", "Headphone Jack", "HPRIGHT"; - simple-audio-card,aux-devs = <&tpa6130a2>; + simple-audio-card,aux-devs = <&hpa1>; sound_cpu: simple-audio-card,cpu { sound-dai = <&ssi2>; @@ -271,6 +271,7 @@ clock-names = "main_clk"; reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; usbh2phy: usbphy2 { @@ -281,6 +282,7 @@ clock-names = "main_clk"; reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; }; @@ -428,13 +430,13 @@ #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled0 { + sysled0@3 { reg = <3>; label = "system:green:status"; linux,default-trigger = "default-on"; }; - sysled1 { + sysled1@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; @@ -479,7 +481,7 @@ reg = <0x50>; }; - tpa6130a2: amp@60 { + hpa1: amp@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 378be720b3c7..00d30bd70068 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -113,6 +113,7 @@ reg = <0>; clocks = <&clks IMX5_CLK_USB_PHY_GATE>; clock-names = "main_clk"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts index 4f54fd4418a3..5e67e43004e7 100644 --- a/arch/arm/boot/dts/imx53-cx9020.dts +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -152,7 +152,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index ec390aa562c3..7ce69c63510c 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -64,7 +64,6 @@ stmpe_touchscreen { compatible = "st,stmpe-ts"; - reg = <0>; st,sample-time = <4>; st,mod-12b = <1>; st,ref-sel = <0>; diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 7eb53e48c2f4..fe15c9555d6e 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -53,132 +53,130 @@ display = &display; }; - soc { - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgb24_vga1>; - status = "okay"; + display: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgb24_vga1>; + status = "okay"; - port { - display0_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; - }; + port { + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; }; + }; - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 71b58b6933e1..a22e461fc168 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -225,10 +225,16 @@ mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ status = "okay"; - phy0: ethernet-phy@0 { - interrupt-parent = <&gpio2>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - device_type = "ethernet-phy"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + device_type = "ethernet-phy"; + }; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 84f17f7abb71..1040251f2951 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -116,6 +116,28 @@ }; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&tzic>; + interrupts = <77>; + }; + + usbphy0: usbphy-0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + status = "okay"; + }; + + usbphy1: usbphy-1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + status = "okay"; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -299,20 +321,6 @@ reg = <0x53f00000 0x60>; }; - usbphy0: usbphy-0 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; - clock-names = "main_clk"; - status = "okay"; - }; - - usbphy1: usbphy-1 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; - clock-names = "main_clk"; - status = "okay"; - }; - usbotg: usb@53f80000 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80000 0x0200>; @@ -433,6 +441,13 @@ clock-names = "ipg", "per"; }; + srtc: rtc@53fa4000 { + compatible = "fsl,imx53-rtc"; + reg = <0x53fa4000 0x4000>; + interrupts = <24>; + clocks = <&clks IMX5_CLK_SRTC_GATE>; + }; + iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; @@ -536,7 +551,7 @@ }; can1: can@53fc8000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx53-flexcan"; reg = <0x53fc8000 0x4000>; interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, @@ -546,7 +561,7 @@ }; can2: can@53fcc000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx53-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, @@ -813,10 +828,5 @@ reg = <0xf8000000 0x20000>; clocks = <&clks IMX5_CLK_OCRAM>; }; - - pmu { - compatible = "arm,cortex-a8-pmu"; - interrupts = <77>; - }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index cc418cecabdb..3c9f4af9e9ff 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -31,35 +31,33 @@ reg = <0x10000000 0x40000000>; }; - soc { - display0: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - status = "okay"; + display0: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + status = "okay"; - display-timings { - 480x800p60 { - native-mode; - clock-frequency = <30000000>; - hactive = <480>; - vactive = <800>; - hfront-porch = <59>; - hback-porch = <10>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; + display-timings { + 480x800p60 { + native-mode; + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <59>; + hback-porch = <10>; + hsync-len = <10>; + vback-porch = <15>; + vfront-porch = <15>; + vsync-len = <15>; + hsync-active = <1>; + vsync-active = <1>; }; + }; - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 126ff964eded..96cd835ccbf6 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -20,34 +20,32 @@ reg = <0x10000000 0x40000000>; }; - soc { - display0: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - status = "okay"; + display0: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + status = "okay"; - display-timings { - 800x480p60 { - native-mode; - clock-frequency = <33246000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <88>; - hback-porch = <88>; - hsync-len = <80>; - vback-porch = <10>; - vfront-porch = <10>; - vsync-len = <25>; - vsync-active = <1>; - }; + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <33246000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <88>; + hback-porch = <88>; + hsync-len = <80>; + vback-porch = <10>; + vfront-porch = <10>; + vsync-len = <25>; + vsync-active = <1>; }; + }; - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 5705ebee0595..dcf9206f3e0d 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -163,7 +163,7 @@ /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts new file mode 100644 index 000000000000..2b2fc360b865 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Solo/DualLite (1.5som+emmc)"; + compatible = "solidrun,cubox-i/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts new file mode 100644 index 000000000000..e09c565d1d1f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Solo/DualLite (1.5som)"; + compatible = "solidrun,cubox-i/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index f10a36b8647d..2b1b3e193f53 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -41,6 +41,8 @@ /dts-v1/; #include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" #include "imx6qdl-cubox-i.dtsi" / { diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts new file mode 100644 index 000000000000..a63f742f20d9 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Solo/DualLite (1.5som+emmc)"; + compatible = "solidrun,hummingboard/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts new file mode 100644 index 000000000000..66a06cf3cdf3 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Solo/DualLite (1.5som)"; + compatible = "solidrun,hummingboard/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 39c2602fa87c..cbd02eb486e1 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -42,6 +42,8 @@ /dts-v1/; #include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" #include "imx6qdl-hummingboard.dtsi" / { diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts new file mode 100644 index 000000000000..80313c13bcdb --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts @@ -0,0 +1,55 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard2.dtsi" + +/ { + model = "SolidRun HummingBoard2 Solo/DualLite (1.5som+emmc)"; + compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts new file mode 100644 index 000000000000..e61ef1156f8b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts @@ -0,0 +1,54 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard2.dtsi" + +/ { + model = "SolidRun HummingBoard2 Solo/DualLite (1.5som)"; + compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/imx6dl-hummingboard2.dts new file mode 100644 index 000000000000..b12cd87f3f94 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard2.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" +#include "imx6qdl-hummingboard2.dtsi" +#include "imx6qdl-hummingboard2-emmc.dtsi" + +/ { + model = "SolidRun HummingBoard2 Solo/DualLite"; + compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h index 0ead323fdbd2..37e430a261de 100644 --- a/arch/arm/boot/dts/imx6dl-pinfunc.h +++ b/arch/arm/boot/dts/imx6dl-pinfunc.h @@ -668,6 +668,7 @@ #define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1 #define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0 #define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x1f8 0x5c8 0x000 0x0 0x0 #define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0 #define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0 #define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0 diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/imx6dl-ts7970.dts new file mode 100644 index 000000000000..d104daf305d9 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-ts7970.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2015 Technologic Systems + * Copyright 2017 Savoir-faire Linux + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-ts7970.dtsi" + +/ { + model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)"; + compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 4d693a75ce98..c01674fa098a 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -170,7 +170,7 @@ }; &gpr { - ipu1_csi0_mux: ipu1_csi0_mux@34 { + ipu1_csi0_mux { compatible = "video-mux"; mux-controls = <&mux 0>; #address-cells = <1>; @@ -224,7 +224,7 @@ }; }; - ipu1_csi1_mux: ipu1_csi1_mux@34 { + ipu1_csi1_mux { compatible = "video-mux"; mux-controls = <&mux 1>; #address-cells = <1>; @@ -309,10 +309,12 @@ #size-cells = <0>; mipi_vc0_to_ipu1_csi0_mux: endpoint@0 { + reg = <0>; remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>; }; mipi_vc0_to_ipu1_csi1_mux: endpoint@1 { + reg = <1>; remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>; }; }; @@ -323,10 +325,12 @@ #size-cells = <0>; mipi_vc1_to_ipu1_csi0_mux: endpoint@0 { + reg = <0>; remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>; }; mipi_vc1_to_ipu1_csi1_mux: endpoint@1 { + reg = <1>; remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>; }; }; @@ -337,10 +341,12 @@ #size-cells = <0>; mipi_vc2_to_ipu1_csi0_mux: endpoint@0 { + reg = <0>; remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>; }; mipi_vc2_to_ipu1_csi1_mux: endpoint@1 { + reg = <1>; remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>; }; }; @@ -351,10 +357,12 @@ #size-cells = <0>; mipi_vc3_to_ipu1_csi0_mux: endpoint@0 { + reg = <0>; remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>; }; mipi_vc3_to_ipu1_csi1_mux: endpoint@1 { + reg = <1>; remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 8b56656e53da..aa0e631f3c0a 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -158,7 +158,7 @@ /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index 27dc0fc686a9..e8dccf552122 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -170,7 +170,7 @@ /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 40b2c67fe7af..6831dfd24cc1 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -174,7 +174,7 @@ /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 404a93d9596b..3ec58500e9c2 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -112,3 +112,55 @@ line-name = "PCA9539-P07"; }; }; + +&pci_root { + /* Intel Corporation I210 Gigabit Network Connection */ + switch_nic: ethernet@3,0 { + compatible = "pci8086,1533"; + reg = <0x00010000 0 0 0 0>; + }; +}; + +&switch_ports { + port@0 { + reg = <0>; + label = "enacq"; + phy-handle = <&switchphy0>; + }; + + port@1 { + reg = <1>; + label = "eneport1"; + phy-handle = <&switchphy1>; + }; + + port@2 { + reg = <2>; + label = "enix"; + phy-handle = <&switchphy2>; + }; + + port@3 { + reg = <3>; + label = "enid"; + phy-handle = <&switchphy3>; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&switch_nic>; + phy-handle = <&switchphy4>; + }; + + port@5 { + reg = <5>; + label = "enembc"; + + /* connected to Ethernet MAC of AT91RM9200 in MII mode */ + fixed-link { + speed = <100>; + full-duplex; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 7f9f176901d4..5650a9b11091 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -111,3 +111,55 @@ fsl,tx-cal-45-dp-ohms = <55>; fsl,tx-d-cal = <100>; }; + +&pci_root { + /* Intel Corporation I210 Gigabit Network Connection */ + switch_nic: ethernet@3,0 { + compatible = "pci8086,1533"; + reg = <0x00010000 0 0 0 0>; + }; +}; + +&switch_ports { + port@0 { + reg = <0>; + label = "enacq"; + phy-handle = <&switchphy0>; + }; + + port@1 { + reg = <1>; + label = "eneport1"; + phy-handle = <&switchphy1>; + }; + + port@2 { + reg = <2>; + label = "enix"; + phy-handle = <&switchphy2>; + }; + + port@3 { + reg = <3>; + label = "enid"; + phy-handle = <&switchphy3>; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&switch_nic>; + phy-handle = <&switchphy4>; + }; + + port@5 { + reg = <5>; + label = "enembc"; + + /* connected to Ethernet MAC of AT91RM9200 in MII mode */ + fixed-link { + speed = <100>; + full-duplex; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 46bdc6722715..35edbdc7bcd1 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -212,3 +212,78 @@ }; }; }; + +&pci_root { + /* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */ + bridge@1,0 { + compatible = "pci10b5,8605"; + reg = <0x00010000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + bridge@2,1 { + compatible = "pci10b5,8605"; + reg = <0x00020800 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + /* Intel Corporation I210 Gigabit Network Connection */ + ethernet@3,0 { + compatible = "pci8086,1533"; + reg = <0x00030000 0 0 0 0>; + }; + }; + + bridge@2,2 { + compatible = "pci10b5,8605"; + reg = <0x00021000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + /* Intel Corporation I210 Gigabit Network Connection */ + switch_nic: ethernet@4,0 { + compatible = "pci8086,1533"; + reg = <0x00040000 0 0 0 0>; + }; + }; + }; +}; + +&switch_ports { + port@0 { + reg = <0>; + label = "eneport1"; + phy-handle = <&switchphy0>; + }; + + port@1 { + reg = <1>; + label = "eneport2"; + phy-handle = <&switchphy1>; + }; + + port@2 { + reg = <2>; + label = "enix"; + phy-handle = <&switchphy2>; + }; + + port@3 { + reg = <3>; + label = "enid"; + phy-handle = <&switchphy3>; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&switch_nic>; + phy-handle = <&switchphy4>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index b915837bbb5f..916ea94d75ca 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -92,6 +92,56 @@ mux-int-port = <1>; mux-ext-port = <4>; }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + mdio0: mdio-gpio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */ + <&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */ + + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; /* 88e6240*/ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + switch_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switchphy0: switchphy@0 { + reg = <0>; + }; + + switchphy1: switchphy@1 { + reg = <1>; + }; + + switchphy2: switchphy@2 { + reg = <2>; + }; + + switchphy3: switchphy@3 { + reg = <3>; + }; + + switchphy4: switchphy@4 { + reg = <4>; + }; + }; + }; + }; }; &ecspi5 { @@ -326,3 +376,15 @@ tcxo-clock-frequency = <26000000>; }; }; + +&pcie { + /* Synopsys, Inc. Device */ + pci_root: root@0,0 { + compatible = "pci16c3,abcd"; + reg = <0x00000000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts new file mode 100644 index 000000000000..3e59ebbb3608 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Dual/Quad (1.5som+emmc)"; + compatible = "solidrun,cubox-i/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts new file mode 100644 index 000000000000..dab70d1230a2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Dual/Quad (1.5som)"; + compatible = "solidrun,cubox-i/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index b68aa0e57f20..1c7b262e3709 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -41,6 +41,8 @@ /dts-v1/; #include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" #include "imx6qdl-cubox-i.dtsi" / { diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi index 4084de43d4d9..09085fde3341 100644 --- a/arch/arm/boot/dts/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -255,7 +255,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: tfa9879@6C { + codec: tfa9879@6c { #sound-dai-cells = <0>; compatible = "nxp,tfa9879"; reg = <0x6C>; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index a3269f57df2b..8a2ea6c58902 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -42,8 +42,8 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" / { model = "Auvidea H100"; @@ -108,21 +108,6 @@ regulator-always-on; }; - reg_nvcc_sd2: regulator-nvcc-sd2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>; - compatible = "regulator-gpio"; - regulator-name = "NVCC_SD2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-type = "voltage"; - regulator-boot-on; - regulator-always-on; - gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; - }; - reg_usbh1_vbus: regulator-usb-h1-vbus { compatible = "regulator-fixed"; enable-active-high; @@ -205,7 +190,7 @@ reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; /* IRQ has a wrong pull resistor which renders it useless */ - port@0 { + port { tc358743_out: endpoint { remote-endpoint = <&mipi_csi2_in>; data-lanes = <1 2 3 4>; @@ -260,12 +245,6 @@ >; }; - pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 { - fsl,pins = < - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 - >; - }; - pinctrl_h100_sgtl5000: h100-sgtl5000 { fsl,pins = < MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 @@ -316,6 +295,7 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 >; }; @@ -328,6 +308,7 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 >; }; @@ -340,6 +321,7 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 >; }; }; @@ -348,7 +330,7 @@ &mipi_csi { status = "okay"; - port@0 { + port { mipi_csi2_in: endpoint { remote-endpoint = <&tc358743_out>; data-lanes = <1 2 3 4>; @@ -389,7 +371,6 @@ pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>; pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>; vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_nvcc_sd2>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts new file mode 100644 index 000000000000..c51b4e4fd71e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Dual/Quad (1.5som+emmc)"; + compatible = "solidrun,hummingboard/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <9>; + fsl,receive-eq-mdB = <3000>; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts new file mode 100644 index 000000000000..e4132d62ffa2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Dual/Quad (1.5som)"; + compatible = "solidrun,hummingboard/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <9>; + fsl,receive-eq-mdB = <3000>; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index 69a7a0a1cb21..8c9e94e648a7 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -42,6 +42,8 @@ /dts-v1/; #include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" #include "imx6qdl-hummingboard.dtsi" / { diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts new file mode 100644 index 000000000000..1998ebfa0fe0 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts @@ -0,0 +1,63 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard2.dtsi" + +/ { + model = "SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)"; + compatible = "solidrun,hummingboard2/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts new file mode 100644 index 000000000000..d3ad7329cd6d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts @@ -0,0 +1,62 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard2.dtsi" + +/ { + model = "SolidRun HummingBoard2 Dual/Quad (1.5som)"; + compatible = "solidrun,hummingboard2/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard2.dts b/arch/arm/boot/dts/imx6q-hummingboard2.dts new file mode 100644 index 000000000000..5249f53dcdbc --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard2.dts @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" +#include "imx6qdl-hummingboard2.dtsi" +#include "imx6qdl-hummingboard2-emmc.dtsi" + +/ { + model = "SolidRun HummingBoard2 Dual/Quad"; + compatible = "solidrun,hummingboard2/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h index 9fc6120a1853..cfb11d3e739c 100644 --- a/arch/arm/boot/dts/imx6q-pinfunc.h +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -551,6 +551,7 @@ #define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0 #define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0 #define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x1e4 0x4f8 0x000 0x0 0x0 #define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1 #define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0 #define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0 diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/imx6q-ts7970.dts new file mode 100644 index 000000000000..f19e18995e68 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ts7970.dts @@ -0,0 +1,54 @@ +/* + * Copyright 2015 Technologic Systems + * Copyright 2017 Savoir-faire Linux + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-ts7970.dtsi" + +/ { + model = "Technologic Systems i.MX6 Quad TS-7970 (Default Device Tree)"; + compatible = "technologic,imx6q-ts7970", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts new file mode 100644 index 000000000000..e0728d475f6f --- /dev/null +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Support for Variscite DART-MX6 Carrier-board + * + * Copyright 2017 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-var-dart.dtsi" +#include <dt-bindings/input/linux-event-codes.h> + +/ { + model = "Variscite DART-MX6 Carrier-board"; + compatible = "variscite,dt6customboard", "fsl,imx6q"; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 248>; + default-brightness-level = <7>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + back { + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + label = "Key Back"; + linux,input-type = <1>; + debounce-interval = <100>; + wakeup-source; + }; + + home { + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + label = "Key Home"; + linux,input-type = <1>; + debounce-interval = <100>; + wakeup-source; + }; + + menu { + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + label = "Key Menu"; + linux,input-type = <1>; + debounce-interval = <100>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led1 { + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + panel1: lvds-panel { + compatible = "sgd,gktw70sdae4se", "panel-lvds"; + backlight = <&backlight_lvds>; + width-mm = <153>; + height-mm = <86>; + label = "gktw70sdae4se"; + data-mapping = "jeida-18"; + + panel-timing { + clock-frequency = <32000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <39>; + hfront-porch = <39>; + vback-porch = <29>; + vfront-porch = <13>; + hsync-len = <47>; + vsync-len = <2>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + reg_usb_h1_vbus: regulator-usbh1vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "dt6-customboard-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&clks IMX6QDL_CLK_CKO>; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>, + <&gpio4 10 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + status = "okay"; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + + rtc@68 { + compatible = "isil,isl12057"; + reg = <0x68>; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usdhc2 { + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index e80fdca585f8..4e776e036cbc 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -338,7 +338,6 @@ stmpe_touchscreen { compatible = "st,stmpe-ts"; - reg = <0>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 8 sample average control */ diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 829a47938179..9fc1fa449f64 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -111,32 +111,28 @@ }; }; - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_usbh1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; }; sound { diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index 7d64075204ae..ee4d0f84eeb2 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -12,48 +12,43 @@ #include <dt-bindings/gpio/gpio.h> / { - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; - reg_usbh1_vbus: regulator@2 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_usbotg_vbus: regulator@3 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 1b1872873207..376750882ed3 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -52,46 +52,42 @@ enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; }; - regulators { - compatible = "simple-bus"; - - reg_2p5v: 2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index fc66bbfd6796..e4eb300549d4 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -274,7 +274,6 @@ stmpe_touchscreen { compatible = "st,stmpe-ts"; - reg = <0>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 8 sample average control */ diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 14fff4ee6516..d1cfdc264126 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -38,8 +38,6 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -64,38 +62,36 @@ }; }; - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + v_5v0: regulator-v-5v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_5v0"; + }; - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + v_usb2: regulator-v-usb2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb2"; + vin-supply = <&v_5v0>; + }; - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + v_usb1: regulator-v-usb1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb1"; + vin-supply = <&v_5v0>; }; sound-spdif { @@ -139,7 +135,7 @@ status = "okay"; - rtc: pcf8523@68 { + rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; @@ -243,21 +239,25 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usbh1>; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <&v_usb2>; status = "okay"; }; &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usbotg>; - vbus-supply = <®_usbotg_vbus>; + vbus-supply = <&v_usb1>; status = "okay"; }; &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; - vmmc-supply = <®_3p3v>; + vmmc-supply = <&vcc_3v3>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&vcc_3v3 { + vin-supply = <&v_5v0>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 37c07c0748aa..92583238ca4a 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -38,8 +38,6 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" / { chosen { @@ -53,38 +51,58 @@ pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; }; - regulators { - compatible = "simple-bus"; + v_3v2: regulator-v-3v2 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "v_3v2"; + vin-supply = <&v_5v0>; + }; - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + v_5v0: regulator-v-5v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_5v0"; + }; - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + v_sd: regulator-v-sd { + compatible = "regulator-fixed"; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_vmmc>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "v_sd"; + startup-delay-us = <1000>; + vin-supply = <&v_3v2>; + }; - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + v_usb2: regulator-v-usb2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb2"; + vin-supply = <&v_5v0>; + }; + + v_usb1: regulator-v-usb1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb1"; + vin-supply = <&v_5v0>; }; sound-sgtl5000 { @@ -132,20 +150,20 @@ status = "okay"; /* Pro baseboard model */ - rtc: pcf8523@68 { + rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; /* Pro baseboard model */ - sgtl5000: sgtl5000@a { + sgtl5000: codec@a { clocks = <&clks IMX6QDL_CLK_CKO>; compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; reg = <0x0a>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <&v_3v2>; + VDDIO-supply = <&v_3v2>; }; }; @@ -247,6 +265,11 @@ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 >; }; + pinctrl_hummingboard_vmmc: hummingboard-vmmc { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; }; }; @@ -280,7 +303,7 @@ &usbh1 { disable-over-current; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <&v_usb2>; status = "okay"; }; @@ -288,7 +311,7 @@ disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; - vbus-supply = <®_usbotg_vbus>; + vbus-supply = <&v_usb1>; status = "okay"; }; @@ -298,7 +321,11 @@ &pinctrl_hummingboard_usdhc2_aux &pinctrl_hummingboard_usdhc2 >; - vmmc-supply = <®_3p3v>; + vmmc-supply = <&v_sd>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&vcc_3v3 { + vin-supply = <&v_3v2>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi new file mode 100644 index 000000000000..f400405381a7 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi @@ -0,0 +1,72 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&iomuxc { + hummingboard2 { + pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>; + vmmc-supply = <&v_3v2>; + vqmmc-supply = <&v_3v2>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi new file mode 100644 index 000000000000..dffbc92e0023 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -0,0 +1,540 @@ +/* + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + chosen { + stdout-path = &uart1; + }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio7 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>; + linux,rc-map-name = "rc-rc6-mce"; + }; + + v_3v2: regulator-v-3v2 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "v_3v2"; + }; + + v_5v0: regulator-v-5v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_5v0"; + }; + + vcc_1p8: regulator-vcc-1p8 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1p8"; + vin-supply = <&v_3v2>; + }; + + v_sd: regulator-v-sd { + compatible = "regulator-fixed"; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_vmmc>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "v_sd"; + startup-delay-us = <1000>; + vin-supply = <&v_3v2>; + }; + + v_usb1: regulator-v-usb1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb1"; + vin-supply = <&v_5v0>; + }; + + v_usb2: regulator-v-usb2 { + /* USB hub port 1 */ + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb2"; + vin-supply = <&v_5v0>; + }; + + v_usb3: regulator-v-usb3 { + /* USB hub port 3 */ + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb3"; + vin-supply = <&v_5v0>; + }; + + v_usb4: regulator-v-usb4 { + /* USB hub port 4 */ + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb4"; + vin-supply = <&v_5v0>; + }; + + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <5>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; +}; + +&audmux { + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>; + cs-gpios = <&gpio2 26 0>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_i2c1>; + status = "okay"; + + pcf8523: rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + sgtl5000: codec@a { + clocks = <&clks IMX6QDL_CLK_CKO>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <&v_3v2>; + VDDD-supply = <&vcc_1p8>; + VDDIO-supply = <&v_3v2>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hummingboard2 { + pinctrl_hog: hoggrp { + fsl,pins = < + /* + * 36 pin headers GPIO description. The pins + * numbering as following - + * + * 3.2v 5v 74 75 + * 73 72 71 70 + * 69 68 67 66 + * + * 77 78 79 76 + * 65 64 61 60 + * 53 52 51 50 + * 49 48 166 132 + * 95 94 90 91 + * GND 54 24 204 + * + * The GPIO numbers can be extracted using + * signal name from below. + * Example - + * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is + * GPIO(3,10) which is (3-1)*32+10 = gpio 74 + * + * i.e. The mapping of GPIO(X,Y) to Linux gpio + * number is : gpio number = (X-1) * 32 + Y + */ + /* DI1_PIN15 */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1 + /* DI1_PIN02 */ + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1 + /* DISP1_DATA00 */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1 + /* DISP1_DATA01 */ + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1 + /* DISP1_DATA02 */ + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1 + /* DISP1_DATA03 */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1 + /* DISP1_DATA04 */ + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1 + /* DISP1_DATA05 */ + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1 + /* DISP1_DATA06 */ + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1 + /* DISP1_DATA07 */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1 + /* DI1_D0_CS */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1 + /* DI1_D1_CS */ + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1 + /* DI1_PIN01 */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1 + /* DI1_PIN03 */ + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1 + /* DISP1_DATA08 */ + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1 + /* DISP1_DATA09 */ + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1 + /* DISP1_DATA10 */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1 + /* DISP1_DATA11 */ + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1 + /* DISP1_DATA12 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1 + /* DISP1_DATA13 */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1 + /* DISP1_DATA14 */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1 + /* DISP1_DATA15 */ + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1 + /* DISP1_DATA16 */ + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1 + /* DISP1_DATA17 */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1 + /* DISP1_DATA18 */ + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1 + /* DISP1_DATA19 */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1 + /* DISP1_DATA20 */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1 + /* DISP1_DATA21 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1 + /* DISP1_DATA22 */ + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1 + /* DISP1_DATA23 */ + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1 + /* DI1_DISP_CLK */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1 + /* SPDIF_IN */ + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1 + /* SPDIF_OUT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1 + + /* MikroBUS GPIO pin number 10 */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 + >; + }; + + pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 /* CS */ + >; + }; + + pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000 + >; + }; + + pinctrl_hummingboard2_hdmi: hummingboard2-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard2_mipi: hummingboard2_mipi { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; + + pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1 + >; + }; + + pinctrl_hummingboard2_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_hummingboard2_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; + + pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus { + fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>; + }; + + pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus { + fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>; + }; + + pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + + pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; + + pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 + >; + }; + + pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + + pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9 + >; + }; + + pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9 + >; + }; + + pinctrl_hummingboard2_vmmc: hummingboard2-vmmc { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_hummingboard2_uart3: hummingboard2-uart3 { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x40013000 + >; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>; + reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_pwm3>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>; + vbus-supply = <&v_usb1>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = < + &pinctrl_hummingboard2_usdhc2_aux + &pinctrl_hummingboard2_usdhc2 + >; + pinctrl-1 = < + &pinctrl_hummingboard2_usdhc2_aux + &pinctrl_hummingboard2_usdhc2_100mhz + >; + pinctrl-2 = < + &pinctrl_hummingboard2_usdhc2_aux + &pinctrl_hummingboard2_usdhc2_200mhz + >; + vmmc-supply = <&v_sd>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_uart3>; + status = "okay"; +}; + +&vcc_3v3 { + vin-supply = <&v_3v2>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 3a77f0fedfce..fd05f7caa472 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -172,7 +172,7 @@ }; }; - i2cmux@2 { + i2c2mux { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2mux>; @@ -183,20 +183,20 @@ i2c-parent = <&i2c2>; idle-state = <0>; - i2c2@1 { + i2c2mux@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; }; - i2c2@2 { + i2c2mux@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; }; }; - i2cmux@3 { + i2c3mux { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3mux>; @@ -206,7 +206,7 @@ i2c-parent = <&i2c3>; idle-state = <0>; - i2c3@1 { + i2c3mux@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 4bdf29169d2a..919b6b7619a4 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -276,6 +276,23 @@ compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "env"; + reg = <0xc0000 0x2000>; + }; + + partition@c2000 { + label = "splash"; + reg = <0xc2000 0x13e000>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 4fa2fac3877b..82d6ccb46982 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -235,6 +235,9 @@ }; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; + ddc-i2c-bus = <&i2c2>; status = "okay"; }; @@ -453,6 +456,12 @@ >; }; + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi index 6a410160c9ee..b55af61dfeca 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi @@ -40,7 +40,7 @@ */ #include <dt-bindings/gpio/gpio.h> / { - clk_sdio: sdio-clock { + clk_brcm: brcm-clock { compatible = "gpio-gate-clock"; #clock-cells = <0>; pinctrl-names = "default"; @@ -48,27 +48,23 @@ enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; }; - regulators { - compatible = "simple-bus"; - - reg_brcm: brcm-reg { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 19 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_brcm_reg>; - regulator-name = "brcm_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <200000>; - }; + reg_brcm: brcm-reg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_reg>; + regulator-name = "brcm_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; }; usdhc1_pwrseq: usdhc1_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>, <&gpio6 0 GPIO_ACTIVE_LOW>; - clocks = <&clk_sdio>; + clocks = <&clk_brcm>; clock-names = "ext_clock"; }; }; @@ -104,13 +100,6 @@ >; }; - pinctrl_microsom_uart1: microsom-uart1 { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - pinctrl_microsom_uart4: microsom-uart4 { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 @@ -133,12 +122,6 @@ }; }; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_uart1>; - status = "okay"; -}; - /* UART4 - Connected to optional BRCM Wifi/BT/FM */ &uart4 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi new file mode 100644 index 000000000000..5f3b8baab20f --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&iomuxc { + microsom { + pinctrl_microsom_usdhc3: microsom-usdhc3 { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + }; +}; + +/* USDHC3 - eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_usdhc3>; + bus-width = <8>; + non-removable; + vmmc-supply = <&vcc_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi new file mode 100644 index 000000000000..44a97ba93a95 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> + +/ { + nvcc_sd1: regulator-nvcc-sd1 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "nvcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + }; + + clk_ti_wifi: ti-wifi-clock { + /* This is a hack around the kernel - using "fixed clock" + * results in the "pinctrl" properties being ignored, and + * the clock not being output. Instead, use a gated clock + * and the unrouted WL_XTAL_PU gpio. + */ + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_ti_clk>; + enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + }; + + pwrseq_ti_wifi: ti-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>; + reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + clocks = <&clk_ti_wifi>; + clock-names = "ext_clock"; + }; +}; + +&iomuxc { + microsom { + pinctrl_microsom_ti_bt: microsom-ti-bt { + fsl,pins = < + /* BT_EN_SOC */ + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 + >; + }; + + pinctrl_microsom_ti_clk: microsom-ti-clk { + fsl,pins = < + /* EXT_32K */ + MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 + /* WL_XTAL_PU (unrouted) */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 + >; + }; + + pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en { + fsl,pins = < + /* WLAN_EN_SOC */ + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 + >; + }; + + pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq { + fsl,pins = < + /* WLAN_IRQ */ + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 + >; + }; + + pinctrl_microsom_uart4: microsom-uart4 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_microsom_usdhc1: microsom-usdhc1 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; + }; +}; + +/* UART4 - Connected to optional TI Wi-Fi/BT/FM */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_uart4>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + clocks = <&clk_ti_wifi>; + clock-names = "ext_clock"; + enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_ti_bt>; + }; +}; + +/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_usdhc1>; + bus-width = <4>; + keep-power-in-suspend; + mmc-pwrseq = <&pwrseq_ti_wifi>; + non-removable; + vmmc-supply = <&vcc_3v3>; + /* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */ + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 900e8c781f91..4ccb7afc4b35 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -1,9 +1,6 @@ /* * Copyright (C) 2013,2014 Russell King * - * This describes the hookup for an AR8035 to the iMX6 on the SolidRun - * MicroSOM. - * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a @@ -41,6 +38,18 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/gpio/gpio.h> + +/ { + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; @@ -51,7 +60,7 @@ }; &iomuxc { - enet { + microsom { pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 @@ -59,10 +68,10 @@ /* AR8035 reset */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 /* AR8035 interrupt */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x80000000 + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x13030 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 @@ -95,5 +104,18 @@ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 >; }; + + pinctrl_microsom_uart1: microsom-uart1 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; }; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_uart1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi new file mode 100644 index 000000000000..f0be516dc28e --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -0,0 +1,594 @@ +/* + * Copyright 2015 Technologic Systems + * Copyright 2017 Savoir-Faire Linux + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds1>; + compatible = "gpio-leds"; + + green-led { + label = "green-led"; + gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + red-led { + label = "red-led"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + yel-led { + label = "yellow-led"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blue-led { + label = "blue-led"; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + en-usb-5v { + label = "en-usb-5v"; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + sel_dc_usb { + label = "sel_dc_usb"; + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can1_3v3: reg_can1_3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg_can1_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_3v3: en-reg_can2_3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg_can2_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator_wlan_vmmc { + compatible = "regulator-fixed"; + regulator-name = "wlan_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <3>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; +}; + +&audmux { + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_3v3>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + n25q064: flash@0 { + compatible = "micron,n25q064", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = < + &gpio5 31 GPIO_ACTIVE_HIGH + &gpio7 12 GPIO_ACTIVE_HIGH + &gpio5 18 GPIO_ACTIVE_HIGH + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + status = "okay"; + + m41t00s: rtc@68 { + compatible = "m41t00"; + reg = <0x68>; + }; + + isl12022: rtc@6f { + compatible = "isl,isl12022"; + reg = <0x6f>; + }; + + gpio8: gpio@28 { + compatible = "technologic,ts7970-gpio"; + reg = <0x28>; + #gpio-cells = <2>; + gpio-controller; + ngpio = <32>; + }; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 /* Onboard Flash CS */ + >; + }; + + pinctrl_ecspi2: ecspi2 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x100b1 /* FPGA_SPI_CS0 */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x100b1 /* FPGA_SPI_CS1 */ + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 /* HD1_SPI_CS */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b088 /* FPGA_RESET */ + MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10 /* FPGA 24MHZ */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b088 /* FPGA_IRQ_0 */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b088 /* FPGA_IRQ_1 */ + >; + }; + + pinctrl_enet: enet { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b088 + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b088 /* ETH_PHY_RESET */ + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b088 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b088 + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b088 /* EN_CAN_1 */ + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b088 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b088 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b088 /* EN_CAN_2 */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* Onboard */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b088 /* USB_HUB_RESET */ + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b088 /* SEL_DC_USB */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b088 /* EN_USB_5V */ + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b088 /* JTAG_FPGA_TMS */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b088 /* JTAG_FPGA_TCK */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b088 /* JTAG_FPGA_TDO */ + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b088 /* JTAG_FPGA_TDI */ + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b088 /* GYRO_INT */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b088 /* MODBUS_FAULT */ + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b088 /* BUS_DIR/JP_SD_BOOT */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b088 /* EN_MODBUS_24V */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b088 /* EN_MODBUS_3V */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b088 /* I210_RESET */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b088 /* EN_RTC_PWR */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b088 /* REVSTRAP1 */ + + /* Offboard */ + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b088 /* LCD_D09 */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b088 /* HD1_IRQ */ + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b088 /* LCD_D10 */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x1b088 /* LCD_D11 */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b088 /* BUS_BHE */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b088 /* BUS_ALE */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b088 /* BUS_CS */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b088 /* DIO_20 */ + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b088 /* BUS_WAIT */ + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b088 /* MUX_AD_00 */ + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b088 /* MUX_AD_01 */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b088 /* MUX_AD_02 */ + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b088 /* MUX_AD_03 */ + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b088 /* MUX_AD_04 */ + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b088 /* MUX_AD_05 */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b088 /* MUX_AD_06 */ + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b088 /* MUX_AD_07 */ + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b088 /* MUX_AD_08 */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b088 /* MUX_AD_09 */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b088 /* MUX_AD_10 */ + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b088 /* MUX_AD_11 */ + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b088 /* MUX_AD_12 */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b088 /* MUX_AD_13 */ + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b088 /* MUX_AD_14 */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b088 /* MUX_AD_15 */ + + /* Strapping only */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b088 + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x1b088 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 + >; + }; + + pinctrl_leds1: leds1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b088 /* GREEN_LED */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b088 /* RED_LED */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b088 /* YEL_LED */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b088 /* IMX6_BLUE_LED */ + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* Audio CLK */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b088 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b088 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b088 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b088 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b088 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b088 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b088 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b088 + MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b088 + MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b088 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b088 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b088 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b088 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b088 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x17059 /* WIFI IRQ */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b088 /* EN_SD_POWER */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; +}; + +&pcie { + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +/* WIFI */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vmmc-supply = <®_wlan_vmmc>; + bus-width = <4>; + non-removable; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_3p3v>; + bus-width = <4>; + fsl,wp-controller; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vmmc-supply = <®_3p3v>; + bus-width = <4>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index c96c91d83678..4161b7d4323a 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -28,6 +28,13 @@ status = "disabled"; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio2 4 0>; + pinctrl-0 = <&pinctrl_power_off>; + pinctrl-names = "default"; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -172,6 +179,12 @@ >; }; + pinctrl_power_off: poweroffgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x30 + >; + }; + pinctrl_touchscreenp7: touchscreenp7grp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70 @@ -208,8 +221,8 @@ fsl,pins = < MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x1b0b0 - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 >; }; @@ -218,8 +231,8 @@ fsl,pins = < MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 >; }; @@ -228,8 +241,8 @@ fsl,pins = < MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi new file mode 100644 index 000000000000..421d6f527609 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi @@ -0,0 +1,503 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Support for Variscite DART-MX6 Module + * + * Copyright 2017 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + memory { + reg = <0x10000000 0x40000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_wl18xx_vmmc: regulator-wl18xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1807"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <70000>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(2) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(2)) + IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + aud3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "disabled"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmicec>; + ddc-i2c-bus = <&i2c1>; + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + tlv320aic3106: codec@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + #sound-dai-cells = <0>; + DRVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <®_3p3v>; + ai3x-ocmv = <0>; + gpio-reset = <&gpio5 5 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; +}; + +&iomuxc { + pinctrl_audmux: audmux { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + /* Audio Clock */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_bt: bt { + fsl,pins = < + /* Bluetooth enable */ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b1 + /* Bluetooth Slow Clock */ + MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x000b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + /* SPI1 CS0 */ + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + /* SPI1 CS1 */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_hdmicec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + /* PMIC INT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + /* WL_EN */ + MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x17071 + /* WL_IRQ */ + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x17071 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170F9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100F9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170F9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170F9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170F9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170F9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; +}; + +&pcie { + fsl,tx-swing-full = <103>; + fsl,tx-swing-low = <103>; + reset-gpio = <&gpio4 11 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_pu { + vin-supply = <&sw1c_reg>; +}; + +®_soc { + vin-supply = <&sw1c_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "disabled"; +}; + +&usbh1 { + status = "disabled"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <4>; + vmmc-supply = <®_wl18xx_vmmc>; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi index 6d8d9ca96646..3a8a4952d45e 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -21,6 +21,11 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 7812fbac963c..72f52fcecee1 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -49,6 +49,7 @@ aliases { mdio-gpio0 = &mdio1; + rtc0 = &ds1341; }; mdio1: mdio { @@ -501,7 +502,7 @@ reg = <0x54>; }; - rtc@68 { + ds1341: rtc@68 { compatible = "dallas,ds1341"; reg = <0x68>; }; @@ -580,6 +581,17 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; status = "okay"; + + host@0 { + reg = <0 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + i210: i210@0 { + reg = <0 0 0 0 0>; + }; + }; }; &usdhc2 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 1ce4eabf0590..59ff86695a14 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -80,6 +80,75 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + }; + + ldb: ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; + gpr = <&gpr>; + status = "disabled"; + + lvds-channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + + lvds0_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_lvds0>; + }; + }; + + port@1 { + reg = <1>; + + lvds0_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_lvds0>; + }; + }; + }; + + lvds-channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lvds1_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_lvds1>; + }; + }; + + port@1 { + reg = <1>; + + lvds1_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_lvds1>; + }; + }; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&gpc>; + interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -224,11 +293,6 @@ status = "disabled"; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; - }; - aips-bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -631,8 +695,11 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - regulator-1p1 { + regulator-1p1@20c8110 { + reg = <0x20c8110>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -647,7 +714,8 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + regulator-3p0@20c8120 { + reg = <0x20c8120>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -662,7 +730,8 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + regulator-2p5@20c8130 { + reg = <0x20c8130>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; @@ -677,7 +746,8 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore { + reg_arm: regulator-vddcore@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -694,7 +764,8 @@ anatop-max-voltage = <1450000>; }; - reg_pu: regulator-vddpu { + reg_pu: regulator-vddpu@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; @@ -711,7 +782,8 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc { + reg_soc: regulator-vddsoc@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -729,14 +801,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; - clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - }; - usbphy1: usbphy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; @@ -773,6 +837,10 @@ mask = <0x60>; status = "disabled"; }; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6q-snvs-lpgpr"; + }; }; epit1: epit@20d0000 { /* EPIT1 */ @@ -841,60 +909,6 @@ reg = <0x20e0000 0x4000>; }; - ldb: ldb { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; - gpr = <&gpr>; - status = "disabled"; - - lvds-channel@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - status = "disabled"; - - port@0 { - reg = <0>; - - lvds0_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_lvds0>; - }; - }; - - port@1 { - reg = <1>; - - lvds0_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_lvds0>; - }; - }; - }; - - lvds-channel@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - status = "disabled"; - - port@0 { - reg = <0>; - - lvds1_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_lvds1>; - }; - }; - - port@1 { - reg = <1>; - - lvds1_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_lvds1>; - }; - }; - }; - }; - dcic1: dcic@20e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; @@ -1017,6 +1031,7 @@ fec: ethernet@2188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; + interrupt-names = "int0", "pps"; interrupts-extended = <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 60600b4cf5fe..2844ab541759 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -20,7 +20,7 @@ reg = <0x80000000 0x40000000>; }; - backlight { + backlight_display: backlight_display { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -39,58 +39,54 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 0 0>; - enable-active-high; - vin-supply = <&swbst_reg>; - }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 2 0>; - enable-active-high; - vin-supply = <&swbst_reg>; - }; + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; - reg_aud3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "wm8962-supply-3v15"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - regulator-boot-on; - }; + reg_aud3v: regulator-aud3v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; - reg_aud4v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "wm8962-supply-4v2"; - regulator-min-microvolt = <4325000>; - regulator-max-microvolt = <4325000>; - regulator-boot-on; - }; + reg_aud4v: regulator-aud4v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; - reg_lcd_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "lcd-3v3"; - gpio = <&gpio4 3 0>; - enable-active-high; - }; + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; sound { @@ -108,6 +104,19 @@ mux-int-port = <2>; mux-ext-port = <3>; }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &audmux { @@ -546,31 +555,11 @@ &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3ea1a41893c8..ae8df3cf687e 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -102,6 +102,21 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&gpc>; + interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -125,11 +140,6 @@ arm,data-latency = <4 2 3>; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; - }; - aips1: aips-bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -517,8 +527,11 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - regulator-1p1 { + regulator-1p1@20c8110 { + reg = <0x20c8110>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -533,7 +546,8 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + regulator-3p0@20c8120 { + reg = <0x20c8120>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -548,7 +562,8 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + regulator-2p5@20c8130 { + reg = <0x20c8130>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -563,7 +578,8 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore { + reg_arm: regulator-vddcore@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -580,7 +596,8 @@ anatop-max-voltage = <1450000>; }; - reg_pu: regulator-vddpu { + reg_pu: regulator-vddpu@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; @@ -597,7 +614,8 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc { + reg_soc: regulator-vddsoc@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -615,14 +633,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; - clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; - }; - usbphy1: usbphy@20c9000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index da815527a7f8..d35aa858f9db 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -24,7 +24,7 @@ reg = <0x80000000 0x40000000>; }; - backlight { + backlight_display: backlight-display { compatible = "pwm-backlight"; pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -49,86 +49,91 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + vcc_sd3: regulator-vcc-sd3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vcc_sd3: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vcc_sd3>; - regulator-name = "VCC_SD3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb_otg1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb_otg2_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg2>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_psu_5v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "PSU-5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_lcd_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "lcd-3v3"; - gpio = <&gpio3 27 0>; - enable-active-high; - }; - - reg_peri_3v3: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_peri_3v3>; - regulator-name = "peri_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - reg_enet_3v3: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_3v3>; - regulator-name = "enet_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - }; + reg_psu_5v: regulator-psu-5v { + compatible = "regulator-fixed"; + regulator-name = "PSU-5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; + + reg_peri_3v3: regulator-peri-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet_3v3: regulator-enet-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3v3>; + regulator-name = "enet_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + + reg_pcie_gpio: regulator-pcie-gpio { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; sound { @@ -146,6 +151,19 @@ mux-int-port = <2>; mux-ext-port = <6>; }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &audmux { @@ -212,34 +230,22 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie_gpio>; + status = "okay"; +}; + &lcdif1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -453,6 +459,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0 + >; + }; + pinctrl_peri_3v3: peri3v3grp { fsl,pins = < MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 5b03ba3beda9..fd7879342d0d 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -141,6 +141,22 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -148,11 +164,6 @@ interrupt-parent = <&gpc>; ranges; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - }; - ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; @@ -574,8 +585,11 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - regulator-1p1 { + regulator-1p1@20c8110 { + reg = <0x20c8110>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -590,7 +604,8 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + regulator-3p0@20c8120 { + reg = <0x20c8120>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -605,7 +620,8 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + regulator-2p5@20c8130 { + reg = <0x20c8130>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -620,7 +636,8 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore { + reg_arm: regulator-vddcore@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -637,7 +654,8 @@ anatop-max-voltage = <1450000>; }; - reg_pcie: regulator-vddpcie { + reg_pcie: regulator-vddpcie@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddpcie"; regulator-min-microvolt = <725000>; @@ -653,7 +671,8 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc { + reg_soc: regulator-vddsoc@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -671,15 +690,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; - }; - usbphy1: usbphy@20c9000 { compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; @@ -750,6 +760,19 @@ #interrupt-cells = <3>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pd_pci: power-domain@3 { + reg = <3>; + #power-domain-cells = <0>; + power-supply = <®_pcie>; + }; + }; }; iomuxc: iomuxc@20e0000 { @@ -862,6 +885,7 @@ fec1: ethernet@2188000 { compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; + interrupt-names = "int0", "pps"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_ENET>, @@ -971,6 +995,7 @@ fec2: ethernet@21b4000 { compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x021b4000 0x4000>; + interrupt-names = "int0", "pps"; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_ENET>, @@ -1138,7 +1163,7 @@ reg = <0x02200000 0x100000>; ranges; - spba-bus@2200000 { + spba-bus@2240000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -1304,25 +1329,29 @@ pcie: pcie@8ffc000 { compatible = "fsl,imx6sx-pcie", "snps,dw-pcie"; - reg = <0x08ffc000 0x4000>; /* DBI */ + reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>; + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - /* configuration space */ - ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000 - /* downstream I/O */ - 0x81000000 0 0 0x08f80000 0 0x00010000 - /* non-prefetchable memory */ - 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>, - <&clks IMX6SX_CLK_PCIE_AXI>, + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PCIE_AXI>, <&clks IMX6SX_CLK_LVDS1_OUT>, + <&clks IMX6SX_CLK_PCIE_REF_125M>, <&clks IMX6SX_CLK_DISPLAY_AXI>; - clock-names = "pcie_ref_125m", "pcie_axi", - "lvds_gate", "display_axi"; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi"; + power-domains = <&pd_pci>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index e5d3ef88be60..18fdb088ba1e 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -30,19 +30,14 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - reg_sd1_vmmc: sd1_regulator { - compatible = "regulator-fixed"; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 963e1698fe1d..5d6c3ba36cd1 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -138,6 +138,23 @@ clock-output-names = "ipp_di1"; }; + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -145,12 +162,6 @@ interrupt-parent = <&gpc>; ranges; - pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; @@ -478,6 +489,7 @@ fec2: ethernet@20b4000 { compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x020b4000 0x4000>; + interrupt-names = "int0", "pps"; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_ENET>, @@ -532,8 +544,11 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - reg_3p0: regulator-3p0 { + reg_3p0: regulator-3p0@20c8110 { + reg = <0x20c8110>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2625000>; @@ -547,7 +562,8 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore { + reg_arm: regulator-vddcore@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "cpu"; regulator-min-microvolt = <725000>; @@ -564,7 +580,8 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc { + reg_soc: regulator-vddsoc@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -600,15 +617,6 @@ fsl,anatop = <&anatop>; }; - tempmon: tempmon { - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; - }; - snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -637,6 +645,10 @@ linux,keycode = <KEY_POWER>; wakeup-source; }; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6ul-snvs-lpgpr"; + }; }; epit1: epit@20d0000 { @@ -786,6 +798,7 @@ fec1: ethernet@2188000 { compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; + interrupt-names = "int0", "pps"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_ENET>, diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 18bebd6d8d47..3f2746169181 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -45,6 +45,13 @@ stdout-path = "serial0:115200n8"; }; + /* fixed crystal dedicated to mpc258x */ + clk16m: clk16m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + panel: panel { compatible = "edt,et057090dhu"; backlight = <&bl>; @@ -70,6 +77,17 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; &bl { @@ -88,6 +106,24 @@ status = "okay"; }; +&ecspi3 { + status = "okay"; + + mcp2515: can@0 { + compatible = "microchip,mcp2515"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_3v3>; + xceiver-supply = <®_5v0>; + status = "okay"; + }; +}; + &fec1 { status = "okay"; }; @@ -97,7 +133,7 @@ /* M41T0M6 real time clock on carrier board */ rtc: m41t0m6@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; @@ -147,5 +183,6 @@ &usdhc1 { keep-power-in-suspend; wakeup-source; + vmmc-supply = <®_3v3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index bb5bf94f1a32..895fbde4d433 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -43,7 +43,10 @@ / { bl: backlight { compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; pwms = <&pwm1 0 5000000 0>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; }; reg_module_3v3: regulator-module-3v3 { @@ -86,7 +89,13 @@ }; &cpu0 { - arm-supply = <®_DCDC2>; + cpu-supply = <®_DCDC2>; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>; + cs-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; }; &fec1 { @@ -112,7 +121,6 @@ fsl,use-minimum-ecc; nand-on-flash-bbt; nand-ecc-mode = "hw"; - status = "okay"; }; &i2c1 { @@ -299,6 +307,22 @@ no-1-8-v; cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; disable-wp; + vqmmc-supply = <®_LDO2>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + fsl,tuning-step = <2>; + max-frequency = <100000000>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <®_DCDC3>; + non-removable; }; &iomuxc { @@ -307,17 +331,16 @@ pinctrl_gpio1: gpio1-grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ - MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ - MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ - MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0X14 /* SODIMM 77 */ + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x74 /* SODIMM 63 */ + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ - MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x14 /* SODIMM 91 */ + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ - MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x14 /* SODIMM 105 */ - MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x14 /* SODIMM 107 */ + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */ + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 */ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ @@ -329,11 +352,12 @@ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */ MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */ + MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM 169 */ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */ MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x74 /* SODIMM 106 */ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ @@ -357,8 +381,7 @@ pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */ fsl,pins = < MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */ - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x14 /* SODIMM 69 */ - MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */ MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */ MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */ MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */ @@ -378,8 +401,8 @@ MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */ MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */ MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */ - MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x14 /* SODIMM 146 */ - MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x14 /* SODIMM 148 */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 /* SODIMM 144 */ + MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x74 /* SODIMM 146 */ >; }; @@ -396,6 +419,12 @@ >; }; + pinctrl_can_int: can-int-grp { + fsl,pins = < + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ + >; + }; + pinctrl_enet1: enet1grp { fsl,pins = < MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 @@ -434,12 +463,17 @@ >; }; + pinctrl_gpio_bl_on: gpio-bl-on { + fsl,pins = < + MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */ + >; + }; + pinctrl_gpmi_nand: gpmi-nand-grp { fsl,pins = < MX7D_PAD_SD3_CLK__NAND_CLE 0x71 MX7D_PAD_SD3_CMD__NAND_ALE 0x71 MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71 - MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x71 MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74 MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71 MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71 @@ -507,6 +541,7 @@ pinctrl_pwm1: pwm1-grp { fsl,pins = < MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4 >; }; @@ -525,6 +560,7 @@ pinctrl_pwm4: pwm4-grp { fsl,pins = < MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 + MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4 >; }; @@ -559,7 +595,7 @@ >; }; - pinctrl_usbotg2_reg: gpio-usbotg2-vbus { + pinctrl_usbh_reg: gpio-usbh-vbus { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ >; @@ -576,6 +612,54 @@ >; }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; + }; + pinctrl_sai1: sai1-grp { fsl,pins = < MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts new file mode 100644 index 000000000000..8ee73c870b12 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017 Toradex AG + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx7d-emmc-eval-v3", + "toradex,colibri-imx7d-emmc", "fsl,imx7d"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi new file mode 100644 index 000000000000..9b63b9c89e4b --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017 Toradex AG + */ + +#include "imx7d.dtsi" +#include "imx7-colibri.dtsi" + +/ { + memory { + reg = <0x80000000 0x40000000>; + }; +}; + +&usbotg2 { + dr_mode = "host"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index a608a14d8c85..136e11ab4893 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -48,20 +48,9 @@ model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d", "fsl,imx7d"; - - reg_usb_otg2_vbus: regulator-usb-otg2-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg2_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; + vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index 3c2cb502b388..6f2bb70c1fbd 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -49,6 +49,10 @@ }; }; +&gpmi { + status = "okay"; +}; + &usbotg2 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts new file mode 100644 index 000000000000..ee02d931cf49 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico-pi.dts @@ -0,0 +1,181 @@ +/* + * Copyright 2017 NXP + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx7d-pico.dtsi" + +/ { + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + status = "okay"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_vref_1v8>; + }; +}; + + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f + MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 + >; + }; + + pinctrl_usbotg1_pwr: usbotg_pwr { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dtsi index 508328b2a6bf..e307462a48ec 100644 --- a/arch/arm/boot/dts/imx7d-pico.dts +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -100,62 +100,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "imx7-sgtl5000"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink_master>; - simple-audio-card,frame-master = <&dailink_master>; - simple-audio-card,cpu { - sound-dai = <&sai1>; - }; - - dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; - }; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>; - assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; - assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - status = "okay"; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - codec: sgtl5000@a { - #sound-dai-cells = <0>; - reg = <0x0a>; - compatible = "fsl,sgtl5000"; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_vref_1v8>; - }; }; &i2c4 { @@ -253,35 +197,6 @@ }; }; -&sai1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1>; - assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, - <&clks IMX7D_SAI1_ROOT_CLK>; - assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; - assigned-clock-rates = <0>, <24576000>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; - assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; - dr_mode = "host"; - status = "okay"; -}; - &usdhc2 { /* Wifi SDIO */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; @@ -315,32 +230,6 @@ }; &iomuxc { - pinctrl_enet1: enet1grp { - fsl,pins = < - MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 - MX7D_PAD_SD2_WP__ENET1_MDC 0x3 - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f - MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f - >; - }; - pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f @@ -354,28 +243,6 @@ >; }; - pinctrl_sai1: sai1grp { - fsl,pins = < - MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f - MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f - MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 - MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 - MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 - >; - }; - - pinctrl_usbotg1_pwr: usbotg_pwr { - fsl,pins = < - MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 - >; - }; - pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX7D_PAD_SD2_CMD__SD2_CMD 0x59 diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 4d308d17f040..200714e3feea 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -63,6 +63,13 @@ }; }; + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + soc { etm@3007d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; @@ -105,18 +112,14 @@ reg = <0x30b20200 0x200>; }; - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY2_CLK>; - clock-names = "main_clk"; - }; - fec2: ethernet@30bf0000 { compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; reg = <0x30bf0000 0x10000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + interrupt-names = "int0", "int1", "int2", "pps"; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET2_TIME_ROOT_CLK>, @@ -129,7 +132,7 @@ status = "disabled"; }; - pcie: pcie@0x33800000 { + pcie: pcie@33800000 { compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; reg = <0x33800000 0x4000>, <0x4ff00000 0x80000>; @@ -137,6 +140,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + bus-range = <0x00 0xff>; ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ num-lanes = <1>; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 82ad26e766eb..9aa2bb998552 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -116,6 +116,66 @@ clock-output-names = "osc"; }; + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY1_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + + usbphynop3: usbphynop3 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + + + replicator { + /* + * non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell" + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -260,43 +320,6 @@ }; }; - replicator { - /* - * non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell" - */ - compatible = "arm,coresight-replicator"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* replicator output ports */ - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&etr_in_port>; - }; - }; - - /* replicator input port */ - port@2 { - reg = <0>; - replicator_in_port0: endpoint { - slave-mode; - remote-endpoint = <&etf_out_port>; - }; - }; - }; - }; - intc: interrupt-controller@31001000 { compatible = "arm,cortex-a7-gic"; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -309,15 +332,6 @@ <0x31006000 0x2000>; }; - timer { - compatible = "arm,armv7-timer"; - interrupt-parent = <&intc>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - aips1: aips-bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -508,8 +522,11 @@ reg = <0x30360000 0x10000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - reg_1p0d: regulator-vdd1p0d { + reg_1p0d: regulator-vdd1p0d@30360210 { + reg = <0x30360210>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p0d"; regulator-min-microvolt = <800000>; @@ -583,9 +600,9 @@ #address-cells = <1>; #size-cells = <0>; - pgc_pcie_phy: pgc-power-domain@IMX7_POWER_DOMAIN_PCIE_PHY { + pgc_pcie_phy: pgc-power-domain@1 { #power-domain-cells = <0>; - reg = <IMX7_POWER_DOMAIN_PCIE_PHY>; + reg = <1>; power-supply = <®_1p0d>; }; }; @@ -945,18 +962,6 @@ reg = <0x30b30200 0x200>; }; - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY1_CLK>; - clock-names = "main_clk"; - }; - - usbphynop3: usbphynop3 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; - clock-names = "main_clk"; - }; - usdhc1: usdhc@30b40000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; @@ -1007,9 +1012,11 @@ fec1: ethernet@30be0000 { compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + interrupt-names = "int0", "int1", "int2", "pps"; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET1_TIME_ROOT_CLK>, diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index efd8af9242d1..66954aaf2c47 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -8,9 +8,33 @@ * kind, whether express or implied. */ +/* + * SSI-SGTL5000 + * + * This command is required when Playback/Capture + * + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + / { aliases { serial0 = &scif0; + serial3 = &scifb1; ethernet0 = &avb; }; @@ -19,6 +43,36 @@ stdout-path = "serial0:115200n8"; }; + audio_clock: audio_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + reg_1p5v: 1p5v { + compatible = "regulator-fixed"; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + rsnd_sgtl5000: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; @@ -58,6 +112,13 @@ }; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &hsusb { status = "okay"; pinctrl-0 = <&usb0_pins>; @@ -75,6 +136,16 @@ compatible = "ti,bq32000"; reg = <0x68>; }; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0x0a>; + clocks = <&audio_clock>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p5v>; + }; }; &pci0 { @@ -88,7 +159,20 @@ pinctrl-names = "default"; }; +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec { + status = "okay"; +}; + &pfc { + can0_pins: can0 { + groups = "can0_data_d"; + function = "can0"; + }; + avb_pins: avb { groups = "avb_mdio", "avb_gmii"; function = "avb"; @@ -104,6 +188,11 @@ function = "scif0"; }; + scifb1_pins: scifb1 { + groups = "scifb1_data_d", "scifb1_ctrl"; + function = "scifb1"; + }; + sdhi1_pins: sd1 { groups = "sdhi1_data4", "sdhi1_ctrl"; function = "sdhi1"; @@ -116,6 +205,11 @@ power-source = <1800>; }; + sound_pins: sound { + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -127,6 +221,22 @@ }; }; +&rcar_sound { + pinctrl-0 = <&sound_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rcar_sound,dai { + dai0 { + playback = <&ssi1 &src3 &dvc1>; + capture = <&ssi0 &src2 &dvc0>; + }; + }; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; @@ -134,6 +244,14 @@ status = "okay"; }; +&scifb1 { + pinctrl-0 = <&scifb1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + &sdhi1 { pinctrl-0 = <&sdhi1_pins>; pinctrl-1 = <&sdhi1_pins_uhs>; @@ -147,6 +265,10 @@ status = "okay"; }; +&ssi1 { + shared-pin; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi index 31fab5f183a9..476273b3f994 100644 --- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -13,6 +13,44 @@ serial1 = &scif1; serial4 = &hscif1; }; + + cec_clock: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; }; &hscif1 { @@ -23,7 +61,56 @@ status = "okay"; }; +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cec_clock>; + clock-names = "cec"; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + &pfc { + can1_pins: can1 { + groups = "can1_data_d"; + function = "can1"; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0"; + function = "du"; + }; + hscif1_pins: hscif1 { groups = "hscif1_data_c", "hscif1_ctrl_c"; function = "hscif1"; diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi index 0c334b25781e..457515b0736a 100644 --- a/arch/arm/boot/dts/keystone-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Keystone 2 clock tree * - * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ clocks { @@ -51,7 +48,7 @@ clocks { clock-output-names = "gemtraceclk"; }; - chipstmxptclk: chipstmxptclk { + chipstmxptclk: chipstmxptclk@2310164 { #clock-cells = <0>; compatible = "ti,keystone,pll-divider-clock"; clocks = <&mainmuxclk>; @@ -160,7 +157,7 @@ clocks { clock-output-names = "chipclk1rstiso112"; }; - clkmodrst0: clkmodrst0 { + clkmodrst0: clkmodrst0@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>; @@ -171,7 +168,7 @@ clocks { }; - clkusb: clkusb { + clkusb: clkusb@2350008 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>; @@ -181,7 +178,7 @@ clocks { domain-id = <0>; }; - clkaemifspi: clkaemifspi { + clkaemifspi: clkaemifspi@235000c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>; @@ -192,7 +189,7 @@ clocks { }; - clkdebugsstrc: clkdebugsstrc { + clkdebugsstrc: clkdebugsstrc@2350014 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -202,7 +199,7 @@ clocks { domain-id = <1>; }; - clktetbtrc: clktetbtrc { + clktetbtrc: clktetbtrc@2350018 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -212,7 +209,7 @@ clocks { domain-id = <1>; }; - clkpa: clkpa { + clkpa: clkpa@235001c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&paclk13>; @@ -222,7 +219,7 @@ clocks { domain-id = <2>; }; - clkcpgmac: clkcpgmac { + clkcpgmac: clkcpgmac@2350020 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkpa>; @@ -232,7 +229,7 @@ clocks { domain-id = <2>; }; - clksa: clksa { + clksa: clksa@2350024 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkpa>; @@ -242,7 +239,7 @@ clocks { domain-id = <2>; }; - clkpcie: clkpcie { + clkpcie: clkpcie@2350028 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; @@ -252,7 +249,7 @@ clocks { domain-id = <3>; }; - clksr: clksr { + clksr: clksr@2350034 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1rstiso112>; @@ -262,7 +259,7 @@ clocks { domain-id = <6>; }; - clkgem0: clkgem0 { + clkgem0: clkgem0@235003c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -272,7 +269,7 @@ clocks { domain-id = <8>; }; - clkddr30: clkddr30 { + clkddr30: clkddr30@235005c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; @@ -282,7 +279,7 @@ clocks { domain-id = <16>; }; - clkwdtimer0: clkwdtimer0 { + clkwdtimer0: clkwdtimer0@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -292,7 +289,7 @@ clocks { domain-id = <0>; }; - clkwdtimer1: clkwdtimer1 { + clkwdtimer1: clkwdtimer1@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -302,7 +299,7 @@ clocks { domain-id = <0>; }; - clkwdtimer2: clkwdtimer2 { + clkwdtimer2: clkwdtimer2@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -312,7 +309,7 @@ clocks { domain-id = <0>; }; - clkwdtimer3: clkwdtimer3 { + clkwdtimer3: clkwdtimer3@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -322,7 +319,7 @@ clocks { domain-id = <0>; }; - clktimer15: clktimer15 { + clktimer15: clktimer15@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -332,7 +329,7 @@ clocks { domain-id = <0>; }; - clkuart0: clkuart0 { + clkuart0: clkuart0@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -342,7 +339,7 @@ clocks { domain-id = <0>; }; - clkuart1: clkuart1 { + clkuart1: clkuart1@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -352,7 +349,7 @@ clocks { domain-id = <0>; }; - clkaemif: clkaemif { + clkaemif: clkaemif@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkaemifspi>; @@ -362,7 +359,7 @@ clocks { domain-id = <0>; }; - clkusim: clkusim { + clkusim: clkusim@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -372,7 +369,7 @@ clocks { domain-id = <0>; }; - clki2c: clki2c { + clki2c: clki2c@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -382,7 +379,7 @@ clocks { domain-id = <0>; }; - clkspi: clkspi { + clkspi: clkspi@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkaemifspi>; @@ -392,7 +389,7 @@ clocks { domain-id = <0>; }; - clkgpio: clkgpio { + clkgpio: clkgpio@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -402,7 +399,7 @@ clocks { domain-id = <0>; }; - clkkeymgr: clkkeymgr { + clkkeymgr: clkkeymgr@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi index d56d68fe7ffc..5e0e7d232161 100644 --- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2014 Texas Instruments, Inc. - * * Keystone 2 Edison SoC specific device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ */ clocks { @@ -35,7 +32,7 @@ clocks { reg-names = "control"; }; - clkusb1: clkusb1 { + clkusb1: clkusb1@2350004 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>; @@ -45,7 +42,7 @@ clocks { domain-id = <0>; }; - clkhyperlink0: clkhyperlink0 { + clkhyperlink0: clkhyperlink02350030 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; @@ -55,7 +52,7 @@ clocks { domain-id = <5>; }; - clkpcie1: clkpcie1 { + clkpcie1: clkpcie1@235006c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; @@ -65,7 +62,7 @@ clocks { domain-id = <18>; }; - clkxge: clkxge { + clkxge: clkxge@23500c8 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index f1f32c54e72f..66fec5f5d081 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Edison EVM device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ /dts-v1/; @@ -28,8 +25,9 @@ status = "okay"; }; }; +}; - soc { +&soc0 { clocks { refclksys: refclksys { @@ -53,7 +51,6 @@ clock-output-names = "refclk-ddr3a"; }; }; - }; }; &usb_phy { @@ -82,7 +79,7 @@ &i2c0 { dtt@50 { - compatible = "at,24c1024"; + compatible = "atmel,24c1024"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index ba828cb59587..a17311c602aa 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Keystone 2 Edison Netcp driver * - * Copyright 2015 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ */ qmss: qmss@2a40000 { diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 6b796b52ff4f..0bcd3f8a9c45 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Edison soc device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ #include <dt-bindings/reset/ti-syscon.h> @@ -48,8 +45,9 @@ aliases { rproc0 = &dsp0; }; +}; - soc { +&soc0 { /include/ "keystone-k2e-clocks.dtsi" usb: usb@2680000 { @@ -194,5 +192,4 @@ bus_freq = <2500000>; }; /include/ "keystone-k2e-netcp.dtsi" - }; }; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 656af194a518..6a4657799b99 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for K2G EVM * - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ */ /dts-v1/; @@ -45,22 +37,6 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; - - ecap0_pins: ecap0_pins { - pinctrl-single,pins = < - K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */ - >; - }; - - spi1_pins: pinmux_spi1_pins { - pinctrl-single,pins = < - K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_scs0.spi1_scs0 */ - K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_clk.spi1_clk */ - K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_miso.spi1_miso */ - K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_mosi.spi1_mosi */ - >; - }; - }; &k2g_pinctrl { @@ -105,6 +81,39 @@ >; }; + ecap0_pins: ecap0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_scs0.spi1_scs0 */ + K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_clk.spi1_clk */ + K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_miso.spi1_miso */ + K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_mosi.spi1_mosi */ + >; + }; + + qspi_pins: pinmux_qspi_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */ + K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */ + K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */ + K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */ + K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */ + K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */ + K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x11ec) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart2_rxd.uart2_rxd */ + K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart2_txd.uart2_txd */ + >; + }; }; &uart0 { @@ -129,6 +138,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */ + ti,non-removable; status = "okay"; }; @@ -205,3 +215,56 @@ }; }; }; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_pins>; + cdns,rclk-en; + + flash0: m25p80@0 { + compatible = "s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <96000000>; + #address-cells = <1>; + #size-cells = <1>; + cdns,read-delay = <5>; + cdns,tshsl-ns = <500>; + cdns,tsd2d-ns = <500>; + cdns,tchsh-ns = <119>; + cdns,tslch-ns = <119>; + + partition@0 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00000000 0x00100000>; + }; + partition@1 { + label = "QSPI.u-boot-env"; + reg = <0x00100000 0x00040000>; + }; + partition@2 { + label = "QSPI.skern"; + reg = <0x00140000 0x0040000>; + }; + partition@3 { + label = "QSPI.pmmc-firmware"; + reg = <0x00180000 0x0040000>; + }; + partition@4 { + label = "QSPI.kernel"; + reg = <0x001C0000 0x0800000>; + }; + partition@5 { + label = "QSPI.file-system"; + reg = <0x009C0000 0x3640000>; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts index 78692745e0af..d820ed2474bb 100644 --- a/arch/arm/boot/dts/keystone-k2g-ice.dts +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for K2G Industrial Communication Engine EVM * * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0 */ /dts-v1/; @@ -30,6 +29,191 @@ status = "okay"; }; }; + + vmain: fixedregulator-vmain { + compatible = "regulator-fixed"; + regulator-name = "vmain_fixed"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; + + v5_0: fixedregulator-v5_0 { + /* TPS54531 */ + compatible = "regulator-fixed"; + regulator-name = "v5_0_fixed"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain>; + regulator-always-on; + }; + + vdd_3v3: fixedregulator-vdd_3v3 { + /* TLV62084 */ + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&v5_0>; + regulator-always-on; + }; + + vdd_1v8: fixedregulator-vdd_1v8 { + /* TLV62084 */ + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&v5_0>; + regulator-always-on; + }; + + vdds_ddr: fixedregulator-vdds_ddr { + /* TLV62080 */ + compatible = "regulator-fixed"; + regulator-name = "vdds_ddr_fixed"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + vin-supply = <&v5_0>; + regulator-always-on; + }; + + vref_ddr: fixedregulator-vref_ddr { + /* LP2996A */ + compatible = "regulator-fixed"; + regulator-name = "vref_ddr_fixed"; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <675000>; + vin-supply = <&vdd_3v3>; + regulator-always-on; + }; + + vtt_ddr: fixedregulator-vtt_ddr { + /* LP2996A */ + compatible = "regulator-fixed"; + regulator-name = "vtt_ddr_fixed"; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <675000>; + vin-supply = <&vdd_3v3>; + regulator-always-on; + }; + + vdd_0v9: fixedregulator-vdd_0v9 { + /* TPS62180 */ + compatible = "regulator-fixed"; + regulator-name = "vdd_0v9_fixed"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&v5_0>; + regulator-always-on; + }; + + vddb: fixedregulator-vddb { + /* TPS22945 */ + compatible = "regulator-fixed"; + regulator-name = "vddb_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio1 53 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + gpio-decoder { + compatible = "gpio-decoder"; + gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>, + <&pca9536 2 GPIO_ACTIVE_HIGH>, + <&pca9536 1 GPIO_ACTIVE_HIGH>, + <&pca9536 0 GPIO_ACTIVE_HIGH>; + linux,axis = <0>; /* ABS_X */ + decoder-max-value = <9>; + }; + + leds1 { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_leds>; + + led0 { + label = "status0:red:cpu0"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu0"; + }; + + led1 { + label = "status0:green:usr"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led2 { + label = "status0:yellow:usr"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led3 { + label = "status1:red:mmc0"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + + led4 { + label = "status1:green:usr"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led5 { + label = "status1:yellow:usr"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led6 { + label = "status2:red:usr"; + gpios = <&gpio0 44 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led7 { + label = "status2:green:usr"; + gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led8 { + label = "status2:yellow:usr"; + gpios = <&gpio0 42 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led9 { + label = "status3:red:usr"; + gpios = <&gpio0 41 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led10 { + label = "status3:green:usr"; + gpios = <&gpio0 101 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led11 { + label = "status3:yellow:usr"; + gpios = <&gpio0 102 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led12 { + label = "status4:green:heartbeat"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; }; &k2g_pinctrl { @@ -39,6 +223,64 @@ K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; + + qspi_pins: pinmux_qspi_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */ + K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */ + K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */ + K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */ + K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */ + K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */ + K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x10FC) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */ + K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */ + K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */ + K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */ + K2G_CORE_IOPAD(0x110C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */ + K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */ + K2G_CORE_IOPAD(0x1114) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* mmc1_sdcd.gpio0_69 */ + K2G_CORE_IOPAD(0x1118) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_sdwp.mmc1_sdwp */ + K2G_CORE_IOPAD(0x111C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_pow.mmc1_pow */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + + user_leds: pinmux_user_leds { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x102c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad11.gpio0_11 */ + K2G_CORE_IOPAD(0x1030) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad12.gpio0_12 */ + K2G_CORE_IOPAD(0x1034) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad13.gpio0_13 */ + K2G_CORE_IOPAD(0x1038) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad14.gpio0_14 */ + K2G_CORE_IOPAD(0x103c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad15.gpio0_15 */ + K2G_CORE_IOPAD(0x1040) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_clk.gpio0_16 */ + K2G_CORE_IOPAD(0x104c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_wen.gpio0_19 */ + K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data9.gpio0_44 */ + K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data10.gpio0_43 */ + K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data11.gpio0_42 */ + K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data12.gpio0_41 */ + K2G_CORE_IOPAD(0x11b8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn0.gpio0_101 */ + K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn1.gpio0_102 */ + >; + }; }; &uart0 { @@ -51,3 +293,96 @@ memory-region = <&dsp_common_memory>; status = "okay"; }; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&qspi_pins>; + cdns,rclk-en; + status = "okay"; + + flash0: m25p80@0 { + compatible = "s25fl256s1", "jedec,spi-nor"; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <96000000>; + #address-cells = <1>; + #size-cells = <1>; + cdns,read-delay = <5>; + cdns,tshsl-ns = <500>; + cdns,tsd2d-ns = <500>; + cdns,tchsh-ns = <119>; + cdns,tslch-ns = <119>; + + partition@0 { + label = "QSPI.u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@1 { + label = "QSPI.u-boot-env"; + reg = <0x00100000 0x00040000>; + }; + partition@2 { + label = "QSPI.skern"; + reg = <0x00140000 0x0040000>; + }; + partition@3 { + label = "QSPI.pmmc-firmware"; + reg = <0x00180000 0x0040000>; + }; + partition@4 { + label = "QSPI.kernel"; + reg = <0x001c0000 0x0800000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x009c0000 0x0040000>; + }; + partition@6 { + label = "QSPI.file-system"; + reg = <0x00a00000 0x1600000>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vdd_3v3>; + cd-gpios = <&gpio0 69 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + clock-frequency = <400000>; + + pca9536: gpio@41 { + compatible = "ti,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vdd_3v3>; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 8f313ff406b9..fd061718dc0a 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for K2G SOC * - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -28,6 +20,8 @@ aliases { serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -75,7 +69,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; }; - soc { + soc0: soc@0 { #address-cells = <1>; #size-cells = <1>; #pinctrl-cells = <1>; @@ -114,7 +108,32 @@ reg-io-width = <4>; reg = <0x02530c00 0x100>; interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; - clock-frequency = <200000000>; + clocks = <&k2g_clks 0x2c 0>; + power-domains = <&k2g_pds 0x2c>; + status = "disabled"; + }; + + uart1: serial@02531000 { + compatible = "ti,da830-uart", "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02531000 0x100>; + interrupts = <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>; + clocks = <&k2g_clks 0x2d 0>; + power-domains = <&k2g_pds 0x2d>; + status = "disabled"; + }; + + uart2: serial@02531400 { + compatible = "ti,da830-uart", "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02531400 0x100>; + interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>; + clocks = <&k2g_clks 0x2e 0>; + power-domains = <&k2g_pds 0x2e>; status = "disabled"; }; @@ -372,11 +391,24 @@ dma-names = "tx", "rx"; bus-width = <8>; ti,needs-special-reset; - ti,non-removable; max-frequency = <96000000>; power-domains = <&k2g_pds 0xc>; clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>; clock-names = "fck", "mmchsdb_fck"; + }; + + qspi: qspi@2940000 { + compatible = "ti,k2g-qspi", "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02940000 0x1000>, + <0x24000000 0x4000000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x24000000>; + clocks = <&k2g_clks 0x43 0x0>; + power-domains = <&k2g_pds 0x43>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi index af9b7190533a..4ba6912176ef 100644 --- a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Kepler/Hawking SoC clock nodes * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ clocks { @@ -53,7 +50,7 @@ clocks { reg-names = "control"; }; - clktsip: clktsip { + clktsip: clktsip@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>; @@ -63,7 +60,7 @@ clocks { domain-id = <0>; }; - clksrio: clksrio { + clksrio: clksrio@235002c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1rstiso13>; @@ -73,7 +70,7 @@ clocks { domain-id = <4>; }; - clkhyperlink0: clkhyperlink0 { + clkhyperlink0: clkhyperlink0@2350030 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; @@ -83,7 +80,7 @@ clocks { domain-id = <5>; }; - clkgem1: clkgem1 { + clkgem1: clkgem1@2350040 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -93,7 +90,7 @@ clocks { domain-id = <9>; }; - clkgem2: clkgem2 { + clkgem2: clkgem2@2350044 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -103,7 +100,7 @@ clocks { domain-id = <10>; }; - clkgem3: clkgem3 { + clkgem3: clkgem3@2350048 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -113,7 +110,7 @@ clocks { domain-id = <11>; }; - clkgem4: clkgem4 { + clkgem4: clkgem4@235004c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -123,7 +120,7 @@ clocks { domain-id = <12>; }; - clkgem5: clkgem5 { + clkgem5: clkgem5@2350050 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -133,7 +130,7 @@ clocks { domain-id = <13>; }; - clkgem6: clkgem6 { + clkgem6: clkgem6@2350054 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -143,7 +140,7 @@ clocks { domain-id = <14>; }; - clkgem7: clkgem7 { + clkgem7: clkgem7@2350058 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -153,7 +150,7 @@ clocks { domain-id = <15>; }; - clkddr31: clkddr31 { + clkddr31: clkddr31@2350060 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -163,7 +160,7 @@ clocks { domain-id = <16>; }; - clktac: clktac { + clktac: clktac@2350064 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -173,7 +170,7 @@ clocks { domain-id = <17>; }; - clkrac01: clkrac01 { + clkrac01: clkrac01@2350068 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -183,7 +180,7 @@ clocks { domain-id = <17>; }; - clkrac23: clkrac23 { + clkrac23: clkrac23@235006c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -193,7 +190,7 @@ clocks { domain-id = <18>; }; - clkfftc0: clkfftc0 { + clkfftc0: clkfftc0@2350070 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -203,7 +200,7 @@ clocks { domain-id = <19>; }; - clkfftc1: clkfftc1 { + clkfftc1: clkfftc1@2350074 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -213,7 +210,7 @@ clocks { domain-id = <19>; }; - clkfftc2: clkfftc2 { + clkfftc2: clkfftc2@2350078 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -223,7 +220,7 @@ clocks { domain-id = <20>; }; - clkfftc3: clkfftc3 { + clkfftc3: clkfftc3@235007c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -233,7 +230,7 @@ clocks { domain-id = <20>; }; - clkfftc4: clkfftc4 { + clkfftc4: clkfftc4@2350080 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -243,7 +240,7 @@ clocks { domain-id = <20>; }; - clkfftc5: clkfftc5 { + clkfftc5: clkfftc5@2350084 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -253,7 +250,7 @@ clocks { domain-id = <20>; }; - clkaif: clkaif { + clkaif: clkaif@2350088 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -263,7 +260,7 @@ clocks { domain-id = <21>; }; - clktcp3d0: clktcp3d0 { + clktcp3d0: clktcp3d0@235008c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -273,7 +270,7 @@ clocks { domain-id = <22>; }; - clktcp3d1: clktcp3d1 { + clktcp3d1: clktcp3d1@2350090 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -283,7 +280,7 @@ clocks { domain-id = <22>; }; - clktcp3d2: clktcp3d2 { + clktcp3d2: clktcp3d2@2350094 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -293,7 +290,7 @@ clocks { domain-id = <23>; }; - clktcp3d3: clktcp3d3 { + clktcp3d3: clktcp3d3@2350098 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -303,7 +300,7 @@ clocks { domain-id = <23>; }; - clkvcp0: clkvcp0 { + clkvcp0: clkvcp0@235009c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -313,7 +310,7 @@ clocks { domain-id = <24>; }; - clkvcp1: clkvcp1 { + clkvcp1: clkvcp1@23500a0 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -323,7 +320,7 @@ clocks { domain-id = <24>; }; - clkvcp2: clkvcp2 { + clkvcp2: clkvcp2@23500a4 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -333,7 +330,7 @@ clocks { domain-id = <24>; }; - clkvcp3: clkvcp3 { + clkvcp3: clkvcp3@23500a8 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -343,7 +340,7 @@ clocks { domain-id = <24>; }; - clkvcp4: clkvcp4 { + clkvcp4: clkvcp4@23500ac { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -353,7 +350,7 @@ clocks { domain-id = <25>; }; - clkvcp5: clkvcp5 { + clkvcp5: clkvcp5@23500b0 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -363,7 +360,7 @@ clocks { domain-id = <25>; }; - clkvcp6: clkvcp6 { + clkvcp6: clkvcp6@23500b4 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -373,7 +370,7 @@ clocks { domain-id = <25>; }; - clkvcp7: clkvcp7 { + clkvcp7: clkvcp7@23500b8 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -383,7 +380,7 @@ clocks { domain-id = <25>; }; - clkbcp: clkbcp { + clkbcp: clkbcp@23500bc { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -393,7 +390,7 @@ clocks { domain-id = <26>; }; - clkdxb: clkdxb { + clkdxb: clkdxb@23500c0 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -403,7 +400,7 @@ clocks { domain-id = <27>; }; - clkhyperlink1: clkhyperlink1 { + clkhyperlink1: clkhyperlink1@23500c4 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; @@ -413,7 +410,7 @@ clocks { domain-id = <28>; }; - clkxge: clkxge { + clkxge: clkxge@23500c8 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index 6dd13b98aaba..ad4e22afe133 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Kepler/Hawking EVM device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ /dts-v1/; @@ -29,7 +26,31 @@ }; }; - soc { + leds { + compatible = "gpio-leds"; + debug1_1 { + label = "keystone:green:debug1"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */ + }; + + debug1_2 { + label = "keystone:red:debug1"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */ + }; + + debug2 { + label = "keystone:blue:debug2"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */ + }; + + debug3 { + label = "keystone:blue:debug3"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */ + }; + }; +}; + +&soc0 { clocks { refclksys: refclksys { #clock-cells = <0>; @@ -66,30 +87,6 @@ clock-output-names = "refclk-ddr3b"; }; }; - }; - - leds { - compatible = "gpio-leds"; - debug1_1 { - label = "keystone:green:debug1"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */ - }; - - debug1_2 { - label = "keystone:red:debug1"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */ - }; - - debug2 { - label = "keystone:blue:debug2"; - gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */ - }; - - debug3 { - label = "keystone:blue:debug3"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */ - }; - }; }; &usb_phy { @@ -158,7 +155,7 @@ &i2c0 { dtt@50 { - compatible = "at,24c1024"; + compatible = "atmel,24c1024"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index a5ac845464bf..b88c0689c285 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Keystone 2 Hawking Netcp driver * - * Copyright 2015 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ */ qmss: qmss@2a40000 { diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index 7c486d9dc90e..ed59474522cb 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 Kepler/Hawking soc specific device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ #include <dt-bindings/reset/ti-syscon.h> @@ -55,8 +52,9 @@ rproc6 = &dsp6; rproc7 = &dsp7; }; +}; - soc { +&soc0 { /include/ "keystone-k2hk-clocks.dtsi" msm_ram: msmram@c000000 { @@ -284,5 +282,4 @@ bus_freq = <2500000>; }; /include/ "keystone-k2hk-netcp.dtsi" - }; }; diff --git a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi index ef8464bb11ff..635528064dea 100644 --- a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013-2014 Texas Instruments, Inc. - * * Keystone 2 lamarr SoC clock nodes * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ clocks { @@ -44,7 +41,7 @@ clocks { reg-names = "control"; }; - clkdfeiqnsys: clkdfeiqnsys { + clkdfeiqnsys: clkdfeiqnsys@2350004 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; @@ -54,7 +51,7 @@ clocks { domain-id = <0>; }; - clkpcie1: clkpcie1 { + clkpcie1: clkpcie1@235002c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; @@ -64,7 +61,7 @@ clocks { domain-id = <4>; }; - clkgem1: clkgem1 { + clkgem1: clkgem1@2350040 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -74,7 +71,7 @@ clocks { domain-id = <9>; }; - clkgem2: clkgem2 { + clkgem2: clkgem2@2350044 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -84,7 +81,7 @@ clocks { domain-id = <10>; }; - clkgem3: clkgem3 { + clkgem3: clkgem3@2350048 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk1>; @@ -94,7 +91,7 @@ clocks { domain-id = <11>; }; - clktac: clktac { + clktac: clktac@2350064 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -104,7 +101,7 @@ clocks { domain-id = <17>; }; - clkrac: clkrac { + clkrac: clkrac@2350068 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -114,7 +111,7 @@ clocks { domain-id = <17>; }; - clkdfepd0: clkdfepd0 { + clkdfepd0: clkdfepd0@235006c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -124,7 +121,7 @@ clocks { domain-id = <18>; }; - clkfftc0: clkfftc0 { + clkfftc0: clkfftc0@2350070 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -134,7 +131,7 @@ clocks { domain-id = <19>; }; - clkosr: clkosr { + clkosr: clkosr@2350088 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -144,7 +141,7 @@ clocks { domain-id = <21>; }; - clktcp3d0: clktcp3d0 { + clktcp3d0: clktcp3d0@235008c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -154,7 +151,7 @@ clocks { domain-id = <22>; }; - clktcp3d1: clktcp3d1 { + clktcp3d1: clktcp3d1@2350094 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -164,7 +161,7 @@ clocks { domain-id = <23>; }; - clkvcp0: clkvcp0 { + clkvcp0: clkvcp0@235009c { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -174,7 +171,7 @@ clocks { domain-id = <24>; }; - clkvcp1: clkvcp1 { + clkvcp1: clkvcp1@23500a0 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -184,7 +181,7 @@ clocks { domain-id = <24>; }; - clkvcp2: clkvcp2 { + clkvcp2: clkvcp2@23500a4 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -194,7 +191,7 @@ clocks { domain-id = <24>; }; - clkvcp3: clkvcp3 { + clkvcp3: clkvcp3@23500a8 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -204,7 +201,7 @@ clocks { domain-id = <24>; }; - clkbcp: clkbcp { + clkbcp: clkbcp@23500bc { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -214,7 +211,7 @@ clocks { domain-id = <26>; }; - clkdfepd1: clkdfepd1 { + clkdfepd1: clkdfepd1@23500c0 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -224,7 +221,7 @@ clocks { domain-id = <27>; }; - clkfftc1: clkfftc1 { + clkfftc1: clkfftc1@23500c4 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -234,7 +231,7 @@ clocks { domain-id = <28>; }; - clkiqnail: clkiqnail { + clkiqnail: clkiqnail@23500c8 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk13>; @@ -244,7 +241,7 @@ clocks { domain-id = <29>; }; - clkuart2: clkuart2 { + clkuart2: clkuart2@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; @@ -254,7 +251,7 @@ clocks { domain-id = <0>; }; - clkuart3: clkuart3 { + clkuart3: clkuart3@2350000 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&clkmodrst0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index 528667618db4..e200533d26a4 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2014 Texas Instruments, Inc. - * * Keystone 2 Lamarr EVM device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ */ /dts-v1/; @@ -28,8 +25,9 @@ status = "okay"; }; }; +}; - soc { +&soc0 { clocks { refclksys: refclksys { #clock-cells = <0>; @@ -38,7 +36,6 @@ clock-output-names = "refclk-sys"; }; }; - }; }; &usb_phy { @@ -55,7 +52,7 @@ &i2c0 { dtt@50 { - compatible = "at,24c1024"; + compatible = "atmel,24c1024"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index 66f615a74118..9ec84228bc16 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Keystone 2 Lamarr Netcp driver * - * Copyright 2015 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ */ qmss: qmss@2a40000 { diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 4370e6513aa4..b61a830f4a4d 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2014 Texas Instruments, Inc. - * * Keystone 2 Lamarr SoC specific device tree * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ */ #include <dt-bindings/reset/ti-syscon.h> @@ -39,8 +36,9 @@ rproc2 = &dsp2; rproc3 = &dsp3; }; +}; - soc { +&soc0 { /include/ "keystone-k2l-clocks.dtsi" uart2: serial@2348400 { @@ -63,6 +61,50 @@ interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; }; + gpio1: gpio@2348000 { + compatible = "ti,keystone-gpio"; + reg = <0x02348000 0x100>; + gpio-controller; + #gpio-cells = <2>; + /* HW Interrupts mapped to GPIO pins */ + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 155 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 401 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 402 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 403 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 404 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 405 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkgpio>; + clock-names = "gpio"; + ti,ngpio = <32>; + ti,davinci-gpio-unbanked = <32>; + }; + k2l_pmx: pinmux@2620690 { compatible = "pinctrl-single"; reg = <0x02620690 0xc>; @@ -350,7 +392,6 @@ bus_freq = <2500000>; }; /include/ "keystone-k2l-netcp.dtsi" - }; }; &spi0 { diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 06e10544f9b1..93ea5c69ea77 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -1,16 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/ */ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" - / { compatible = "ti,keystone"; model = "Texas Instruments Keystone 2 SoC"; @@ -25,11 +20,14 @@ spi2 = &spi2; }; - memory { + chosen { }; + + memory: memory@80000000 { + device_type = "memory"; reg = <0x00000000 0x80000000 0x00000000 0x40000000>; }; - gic: interrupt-controller { + gic: interrupt-controller@2561000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -70,7 +68,7 @@ cpu_on = <0x84000003>; }; - soc { + soc0: soc@0 { #address-cells = <1>; #size-cells = <1>; compatible = "ti,keystone","simple-bus"; diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index df7851820507..f21a50dd9869 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -157,7 +157,7 @@ reg = <0x80000 0x20000>; }; - partition@A0000 { + partition@a0000 { label = "s_env"; reg = <0xA0000 0x20000>; }; @@ -167,17 +167,17 @@ reg = <0x200000 0x2A0000>; }; - partition@4A0000 { + partition@4a0000 { label = "rootfs"; reg = <0x4A0000 0x1760000>; }; - partition@1C00000 { + partition@1c00000 { label = "alt_kernel"; reg = <0x1C00000 0x2A0000>; }; - partition@1EA0000 { + partition@1ea0000 { label = "alt_rootfs"; reg = <0x1EA0000 0x1760000>; }; @@ -187,7 +187,7 @@ reg = <0x3600000 0x4A00000>; }; - partition@C0000 { + partition@c0000 { label = "unused"; reg = <0xC0000 0x140000>; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts new file mode 100644 index 000000000000..32d0dc371fc3 --- /dev/null +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -0,0 +1,17 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap34xx.dtsi" +#include "logicpd-som-lv.dtsi" +#include "logicpd-som-lv-baseboard.dtsi" +#include "omap-gpmc-smsc9221.dtsi" + +/ { + model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index 2fa5eb4bd402..24283739526c 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -8,257 +8,10 @@ #include "omap36xx.dtsi" #include "logicpd-som-lv.dtsi" +#include "logicpd-som-lv-baseboard.dtsi" #include "omap-gpmc-smsc9221.dtsi" / { model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_key_pins>; - - sysboot2 { - label = "gpio3"; - gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* gpio_111 / uP_GPIO_3 */ - linux,code = <BTN_0>; - wakeup-source; - }; - }; - - sound { - compatible = "ti,omap-twl4030"; - ti,model = "omap3logic"; - ti,mcbsp = <&mcbsp2>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins &led_pins_wkup>; - - led1 { - label = "led1"; - gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* gpio133 */ - linux,default-trigger = "cpu0"; - }; - - led2 { - label = "led2"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* gpio11 */ - linux,default-trigger = "none"; - }; - }; -}; - -&vaux1 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; -}; - -&vaux4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; -}; - -&mcbsp2 { - status = "okay"; -}; - -&charger { - ti,bb-uvolt = <3200000>; - ti,bb-uamp = <150>; -}; - -&gpmc { - ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ - 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ - - ethernet@gpmc { - pinctrl-names = "default"; - pinctrl-0 = <&lan9221_pins>; - interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_LOW>; /* gpio_152 */ - reg = <1 0 0xff>; - }; -}; - -&vpll2 { - regulator-always-on; -}; - -&dss { - status = "ok"; - vdds_dsi-supply = <&vpll2>; - vdda_video-supply = <&video_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&dss_dpi_pins1>; - port { - dpi_out: endpoint { - remote-endpoint = <&lcd_in>; - data-lines = <16>; - }; - }; -}; - -/ { - aliases { - display0 = &lcd0; - }; - - video_reg: video_reg { - compatible = "regulator-fixed"; - regulator-name = "fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - lcd0: display@0 { - compatible = "panel-dpi"; - label = "28"; - status = "okay"; - /* default-on; */ - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_pin>; - enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <2>; - vsync-len = <11>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - - bl: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&backlight_pins>; - pwms = <&twl_pwm 0 5000000>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <7>; - enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */ - }; -}; - -&mmc1 { - interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ - cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ - vmmc-supply = <&vmmc1>; - bus-width = <4>; - cap-power-off-card; -}; - -&omap3_pmx_core { - gpio_key_pins: pinmux_gpio_key_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_xclkb.gpio_111 / uP_GPIO_3*/ - >; - }; - - led_pins: pinmux_led_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */ - >; - }; - - lan9221_pins: pinmux_lan9221_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ - >; - }; - - mmc1_pins: pinmux_mmc1_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */ - OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ - >; - }; - - lcd_enable_pin: pinmux_lcd_enable_pin { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ - >; - }; - - dss_dpi_pins1: pinmux_dss_dpi_pins1 { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ - - OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data0.dss_data0 */ - OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data1.dss_data1 */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data2.dss_data2 */ - OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data3.dss_data3 */ - OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data4.dss_data4 */ - OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data5.dss_data5 */ - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ - >; - }; -}; - -&omap3_pmx_wkup { - led_pins_wkup: pinmux_led_pins_wkup { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 / uP_GPIO_1 */ - >; - }; - - backlight_pins: pinmux_backlight_pins { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ - >; - }; -}; - - -&uart1 { - interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; -}; - -/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ -&usb_otg_hs { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb_otg_pins>; - interface-type = <0>; - usb-phy = <&usb2_phy>; - phys = <&usb2_phy>; - phy-names = "usb2-phy"; - mode = <3>; - power = <50>; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi new file mode 100644 index 000000000000..4990ed90dcea --- /dev/null +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -0,0 +1,256 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + + sysboot2 { + label = "gpio3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* gpio_111 / uP_GPIO_3 */ + linux,code = <BTN_0>; + wakeup-source; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3logic"; + ti,mcbsp = <&mcbsp2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &led_pins_wkup>; + + led1 { + label = "led1"; + gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* gpio133 */ + linux,default-trigger = "cpu0"; + }; + + led2 { + label = "led2"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* gpio11 */ + linux,default-trigger = "none"; + }; + }; +}; + +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +&vaux4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&mcbsp2 { + status = "okay"; +}; + +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */ + 2 0 0x10000000 0x2000000>; /* CS2: 32MB for NOR */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&lan9221_pins>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; /* gpio_152 */ + reg = <1 0 0xff>; + }; +}; + +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&video_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins1>; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <16>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + video_reg: video_reg { + compatible = "regulator-fixed"; + regulator-name = "fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "28"; + status = "okay"; + /* default-on; */ + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_pin>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <2>; + vsync-len = <11>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + + bl: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + pwms = <&twl_pwm 0 5000000>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */ + }; +}; + +&mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ + cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cap-power-off-card; +}; + +&omap3_pmx_core { + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_xclkb.gpio_111 / uP_GPIO_3*/ + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */ + >; + }; + + lan9221_pins: pinmux_lan9221_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ + >; + }; + + lcd_enable_pin: pinmux_lcd_enable_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ + >; + }; + + dss_dpi_pins1: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ + >; + }; +}; + +&omap3_pmx_wkup { + led_pins_wkup: pinmux_led_pins_wkup { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 / uP_GPIO_1 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ + >; + }; +}; + + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb_otg_pins>; + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 29cb804d10cc..c1aa7a4518fb 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -67,33 +67,6 @@ gpmc,device-width = <2>; #address-cells = <1>; #size-cells = <1>; - - /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */ - - x-loader@0 { - label = "x-loader"; - reg = <0 0x80000>; - }; - - bootloaders@80000 { - label = "u-boot"; - reg = <0x80000 0x1e0000>; - }; - - bootloaders_env@260000 { - label = "u-boot-env"; - reg = <0x260000 0x20000>; - }; - - kernel@280000 { - label = "kernel"; - reg = <0x280000 0x400000>; - }; - - filesystem@680000 { - label = "fs"; - reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */ - }; }; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts new file mode 100644 index 000000000000..d7cb659656ce --- /dev/null +++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts @@ -0,0 +1,17 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap34xx.dtsi" +#include "logicpd-torpedo-som.dtsi" +#include "logicpd-torpedo-baseboard.dtsi" +#include "omap-gpmc-smsc9221.dtsi" + +/ { + model = "LogicPD Zoom OMAP35xx Torpedo Development Kit"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3"; +}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index b4575bbaf085..234afd6d60ec 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -9,396 +9,69 @@ #include "omap36xx.dtsi" #include "logicpd-torpedo-som.dtsi" #include "omap-gpmc-smsc9221.dtsi" +#include "logicpd-torpedo-baseboard.dtsi" / { model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit"; compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; - gpio_keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; - - sysboot2 { - label = "sysboot2"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ - linux,code = <BTN_0>; - wakeup-source; - }; - - sysboot5 { - label = "sysboot5"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ - linux,code = <BTN_1>; - wakeup-source; - }; - - gpio1 { - label = "gpio1"; - gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ - linux,code = <BTN_2>; - wakeup-source; - }; - - gpio2 { - label = "gpio2"; - gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ - linux,code = <BTN_3>; - wakeup-source; - }; - }; - - sound { - compatible = "ti,omap-twl4030"; - ti,model = "omap3logic"; - ti,mcbsp = <&mcbsp2>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - led1 { - label = "led1"; - gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */ - linux,default-trigger = "cpu0"; - }; - - led2 { - label = "led2"; - gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */ - linux,default-trigger = "none"; - }; - }; - - pwm10: dmtimer-pwm { - compatible = "ti,omap-dmtimer-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm_pins>; - ti,timers = <&timer10>; - #pwm-cells = <3>; - }; - -}; - -&vaux1 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; -}; - -&vaux4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; -}; - -&mcbsp2 { - status = "okay"; -}; - -&charger { - ti,bb-uvolt = <3200000>; - ti,bb-uamp = <150>; -}; - -&gpmc { - ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ - 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ - - ethernet@gpmc { - pinctrl-names = "default"; - pinctrl-0 = <&lan9221_pins>; - interrupt-parent = <&gpio5>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */ - reg = <1 0 0xff>; - }; -}; - -&vpll2 { - regulator-always-on; -}; - -&dss { - status = "ok"; - vdds_dsi-supply = <&vpll2>; - vdda_video-supply = <&video_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&dss_dpi_pins1>; - port { - dpi_out: endpoint { - remote-endpoint = <&lcd_in>; - data-lines = <16>; - }; - }; -}; - -/ { - aliases { - display0 = &lcd0; - }; - - video_reg: video_reg { - pinctrl-names = "default"; - pinctrl-0 = <&panel_pwr_pins>; + wl12xx_vmmc: wl12xx_vmmc { compatible = "regulator-fixed"; - regulator-name = "fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ - }; - - lcd0: display { - compatible = "panel-dpi"; - label = "15"; - status = "okay"; - /* default-on; */ - pinctrl-names = "default"; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <4>; - vsync-len = <11>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - - bl: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&backlight_pins>; - pwms = <&pwm10 0 5000000 0>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <7>; - enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 29 0>; /* gpio157 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; }; }; -&mmc1 { - interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; +/* + * Only found on the wireless SOM. For the SOM without wireless, the pins for + * MMC3 can be routed with jumpers to the second MMC slot on the devkit and + * gpio157 is not connected. So this should be OK to keep common for now, + * probably device tree overlays is the way to go with the various SOM and + * jumpering combinations for the long run. + */ +&mmc3 { + interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins &mmc1_cd>; - cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */ - vmmc-supply = <&vmmc1>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; bus-width = <4>; cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1283"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; }; &omap3_pmx_core { - gpio_key_pins: pinmux_gpio_key_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ - OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ - >; - }; - - pwm_pins: pinmux_pwm_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ - >; - }; - - led_pins: pinmux_led_pins { + mmc3_pins: pinmux_mm3_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ - OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ - >; - }; - - mmc1_pins: pinmux_mmc1_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - >; - }; - - tsc2004_pins: pinmux_tsc2004_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ - >; - }; - - backlight_pins: pinmux_backlight_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ - >; - }; - - isp_pins: pinmux_isp_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ - OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ - OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ - OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ - - OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ - OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ - OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ - OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ - OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ - OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ - OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */ - OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */ - >; - }; - - panel_pwr_pins: pinmux_panel_pwr_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ - >; - }; - - dss_dpi_pins1: pinmux_dss_dpi_pins1 { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ - - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */ - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */ - - OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */ - OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */ - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */ - OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */ - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */ >; }; }; -&omap3_pmx_wkup { - gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ - OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ - >; - }; - - lan9221_pins: pinmux_lan9221_pins { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ - >; - }; - - mmc1_cd: pinmux_mmc1_cd { +&omap3_pmx_core2 { + mmc3_core2_pins: pinmux_mmc3_core2_pins { pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ + OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ >; }; }; - -&i2c2 { - mt9p031@48 { - compatible = "aptina,mt9p031"; - reg = <0x48>; - clocks = <&isp 0>; - vaa-supply = <&vaux4>; - vdd-supply = <&vaux4>; - vdd_io-supply = <&vaux4>; - port { - mt9p031_out: endpoint { - input-clock-frequency = <24000000>; - pixel-clock-frequency = <72000000>; - remote-endpoint = <&ccdc_ep>; - }; - }; - }; -}; - -&i2c3 { - touchscreen: tsc2004@48 { - compatible = "ti,tsc2004"; - reg = <0x48>; - vio-supply = <&vaux1>; - pinctrl-names = "default"; - pinctrl-0 = <&tsc2004_pins>; - interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */ - - touchscreen-fuzz-x = <4>; - touchscreen-fuzz-y = <7>; - touchscreen-fuzz-pressure = <2>; - touchscreen-size-x = <4096>; - touchscreen-size-y = <4096>; - touchscreen-max-pressure = <2048>; - - ti,x-plate-ohms = <280>; - ti,esd-recovery-timeout-ms = <8000>; - }; -}; - -&mcspi1 { - at25@0 { - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <5000000>; - spi-cpha; - spi-cpol; - - pagesize = <64>; - size = <32768>; - address-width = <16>; - }; -}; - -&isp { - pinctrl-names = "default"; - pinctrl-0 = <&isp_pins>; - ports { - port@0 { - reg = <0>; - ccdc_ep: endpoint { - remote-endpoint = <&mt9p031_out>; - bus-width = <8>; - hsync-active = <1>; - vsync-active = <1>; - pclk-sample = <0>; - }; - }; - }; -}; - -&uart1 { - interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; -}; - -/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ -&usb_otg_hs { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb_otg_pins>; - interface-type = <0>; - usb-phy = <&usb2_phy>; - phys = <&usb2_phy>; - phy-names = "usb2-phy"; - mode = <3>; - power = <50>; -}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi new file mode 100644 index 000000000000..86c5644f558c --- /dev/null +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -0,0 +1,395 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; + + sysboot2 { + label = "sysboot2"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ + linux,code = <BTN_0>; + wakeup-source; + }; + + sysboot5 { + label = "sysboot5"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ + linux,code = <BTN_1>; + wakeup-source; + }; + + gpio1 { + label = "gpio1"; + gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ + linux,code = <BTN_2>; + wakeup-source; + }; + + gpio2 { + label = "gpio2"; + gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ + linux,code = <BTN_3>; + wakeup-source; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3logic"; + ti,mcbsp = <&mcbsp2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led1 { + label = "led1"; + gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */ + linux,default-trigger = "cpu0"; + }; + + led2 { + label = "led2"; + gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */ + linux,default-trigger = "none"; + }; + }; + + pwm10: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + ti,timers = <&timer10>; + #pwm-cells = <3>; + }; + +}; + +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +&vaux4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&mcbsp2 { + status = "okay"; +}; + +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&lan9221_pins>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */ + reg = <1 0 0xff>; + }; +}; + +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&video_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins1>; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <16>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + video_reg: video_reg { + pinctrl-names = "default"; + pinctrl-0 = <&panel_pwr_pins>; + compatible = "regulator-fixed"; + regulator-name = "fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + }; + + lcd0: display { + compatible = "panel-dpi"; + label = "15"; + status = "okay"; + /* default-on; */ + pinctrl-names = "default"; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <4>; + vsync-len = <11>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + bl: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + pwms = <&pwm10 0 5000000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ + }; +}; + +&mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd>; + cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */ + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cap-power-off-card; +}; + +&omap3_pmx_core { + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ + >; + }; + + pwm_pins: pinmux_pwm_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + tsc2004_pins: pinmux_tsc2004_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ + >; + }; + + isp_pins: pinmux_isp_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ + OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ + + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */ + >; + }; + + panel_pwr_pins: pinmux_panel_pwr_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ + >; + }; + + dss_dpi_pins1: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */ + >; + }; +}; + +&omap3_pmx_wkup { + gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ + >; + }; + + lan9221_pins: pinmux_lan9221_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ + >; + }; + + mmc1_cd: pinmux_mmc1_cd { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ + >; + }; +}; + +&i2c2 { + mt9p031@48 { + compatible = "aptina,mt9p031"; + reg = <0x48>; + clocks = <&isp 0>; + vaa-supply = <&vaux4>; + vdd-supply = <&vaux4>; + vdd_io-supply = <&vaux4>; + port { + mt9p031_out: endpoint { + input-clock-frequency = <24000000>; + pixel-clock-frequency = <72000000>; + remote-endpoint = <&ccdc_ep>; + }; + }; + }; +}; + +&i2c3 { + touchscreen: tsc2004@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + vio-supply = <&vaux1>; + pinctrl-names = "default"; + pinctrl-0 = <&tsc2004_pins>; + interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; +}; + +&mcspi1 { + at25@0 { + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; +}; + +&isp { + pinctrl-names = "default"; + pinctrl-0 = <&isp_pins>; + ports { + port@0 { + reg = <0>; + ccdc_ep: endpoint { + remote-endpoint = <&mt9p031_out>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb_otg_pins>; + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 6d89736c7b44..b50b796e15c7 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -30,17 +30,6 @@ linux,default-trigger = "none"; }; }; - - wl12xx_vmmc: wl12xx_vmmc { - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio5 29 0>; /* gpio157 */ - startup-delay-us = <70000>; - enable-active-high; - vin-supply = <&vmmc2>; - }; }; &gpmc { @@ -73,33 +62,6 @@ gpmc,device-width = <2>; #address-cells = <1>; #size-cells = <1>; - - /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */ - - x-loader@0 { - label = "x-loader"; - reg = <0 0x80000>; - }; - - bootloaders@80000 { - label = "u-boot"; - reg = <0x80000 0x1e0000>; - }; - - bootloaders_env@260000 { - label = "u-boot-env"; - reg = <0x260000 0x20000>; - }; - - kernel@280000 { - label = "kernel"; - reg = <0x280000 0x400000>; - }; - - filesystem@680000 { - label = "fs"; - reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */ - }; }; }; @@ -131,44 +93,7 @@ }; }; -/* - * Only found on the wireless SOM. For the SOM without wireless, the pins for - * MMC3 can be routed with jumpers to the second MMC slot on the devkit and - * gpio157 is not connected. So this should be OK to keep common for now, - * probably device tree overlays is the way to go with the various SOM and - * jumpering combinations for the long run. - */ -&mmc3 { - interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; - pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; - pinctrl-names = "default"; - vmmc-supply = <&wl12xx_vmmc>; - non-removable; - bus-width = <4>; - cap-power-off-card; - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1283"; - reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ - ref-clock-frequency = <26000000>; - tcxo-clock-frequency = <26000000>; - }; -}; - &omap3_pmx_core { - mmc3_pins: pinmux_mm3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ - OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ - OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ - OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ - OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ - OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */ - >; - }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ @@ -224,15 +149,6 @@ pinctrl-0 = <&mcspi1_pins>; }; -&omap3_pmx_core2 { - mmc3_core2_pins: pinmux_mmc3_core2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ - OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ - >; - }; -}; - #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts index c43adb7b4d7c..58ea0a4e7afa 100644 --- a/arch/arm/boot/dts/lpc3250-ea3250.dts +++ b/arch/arm/boot/dts/lpc3250-ea3250.dts @@ -156,8 +156,8 @@ uda1380: uda1380@18 { compatible = "nxp,uda1380"; reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; dac-clk = "wspll"; }; diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts index c72eb9845603..1e1c2f517a82 100644 --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -81,8 +81,8 @@ uda1380: uda1380@18 { compatible = "nxp,uda1380"; reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; dac-clk = "wspll"; }; diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts index 7c16d639a1b4..beddaba85393 100644 --- a/arch/arm/boot/dts/lpc4337-ciaa.dts +++ b/arch/arm/boot/dts/lpc4337-ciaa.dts @@ -174,17 +174,17 @@ clock-frequency = <400000>; eeprom@50 { - compatible = "microchip,24c512"; + compatible = "microchip,24c512", "atmel,24c512"; reg = <0x50>; }; eeprom@51 { - compatible = "microchip,24c02"; + compatible = "microchip,24c02", "atmel,24c02"; reg = <0x51>; }; eeprom@54 { - compatible = "microchip,24c512"; + compatible = "microchip,24c512", "atmel,24c512"; reg = <0x54>; }; }; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 874c75d44013..8b973f537d3a 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -429,7 +429,7 @@ }; eeprom@50 { - compatible = "nxp,24c02"; + compatible = "nxp,24c02", "atmel,24c02"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 9b5fad622522..02b23fa29d75 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -490,7 +490,7 @@ }; eeprom@57 { - compatible = "microchip,24c64"; + compatible = "microchip,24c64", "atmel,24c64"; reg = <0x57>; }; }; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts new file mode 100644 index 000000000000..d01f64b252b1 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -0,0 +1,241 @@ +/* + * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/ + * + * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com> + * Jimmy Chen (陳永達) <jimmy.chen@moxa.com> + * SZ Lin (林上智) <sz.lin@moxa.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "ls1021a.dtsi" + +/ { + model = "Moxa UC-8410A"; + + aliases { + enet0_rgmii_phy = &rgmii_phy0; + enet1_rgmii_phy = &rgmii_phy1; + enet2_rgmii_phy = &rgmii_phy2; + }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + cel-pwr { + label = "UC8410A:CEL-PWR"; + gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + cel-reset { + label = "UC8410A:CEL-RESET"; + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + str-led { + label = "UC8410A:RED:PROG"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + sw-ready { + label = "UC8410A:GREEN:SWRDY"; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + beeper { + label = "UC8410A:BEEP"; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led0 { + label = "UC8410A:GREEN:PROG2"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led1 { + label = "UC8410A:GREEN:PROG1"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led2 { + label = "UC8410A:GREEN:PROG0"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal0 { + label = "UC8410A:GREEN:CEL2"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal1 { + label = "UC8410A:GREEN:CEL1"; + gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal2 { + label = "UC8410A:GREEN:CEL0"; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-red { + label = "UC8410A:RED:DIA"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-green { + label = "UC8410A:GREEN:DIA"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-yellow { + label = "UC8410A:YELLOW:DIA"; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pushbtn-key { + label = "push button key"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + default-state = "on"; + }; + }; +}; + +&enet0 { + phy-handle = <&rgmii_phy0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enet1 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + tpm@20 { + compatible = "infineon,slb9635tt"; + reg = <0x20>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "marvell,88e1118"; + reg = <0x0>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; + + rgmii_phy1: ethernet-phy@1 { + compatible = "marvell,88e1118"; + reg = <0x1>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; + + rgmii_phy2: ethernet-phy@2 { + compatible = "marvell,88e1118"; + reg = <0x2>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; +}; + +&qspi { + bus-num = <0>; + fsl,spi-num-chipselects = <2>; + fsl,spi-flash-chipselects = <0>; + fsl,qspi-has-second-chip; + status = "okay"; + + flash: flash@0 { + compatible = "spansion,s25fl064l", "spansion,s25fl164k"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + + partitions@0 { + label = "U-Boot"; + reg = <0x0 0x180000>; + }; + + partitions@180000 { + label = "U-Boot Env"; + reg = <0x180000 0x680000>; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 67b4de0e3439..499f41a2c6f0 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -239,6 +239,11 @@ device-width = <1>; }; + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + fpga: board-control@3,0 { #address-cells = <1>; #size-cells = <1>; @@ -331,3 +336,19 @@ &uart1 { status = "okay"; }; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + +&can3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 44715c8ef756..f0c949d74833 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -228,6 +228,10 @@ }; }; +&esdhc { + status = "okay"; +}; + &sai1 { status = "okay"; }; @@ -243,3 +247,19 @@ &uart1 { status = "okay"; }; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + +&can3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 9319e1f0f1d8..c31dad98f989 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -106,6 +106,14 @@ compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; }; soc { @@ -154,8 +162,22 @@ big-endian; }; + qspi: quadspi@1550000 { + compatible = "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1550000 0x0 0x10000>, + <0x0 0x40000000 0x0 0x40000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + esdhc: esdhc@1560000 { - compatible = "fsl,esdhc"; + compatible = "fsl,ls1021a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; @@ -575,7 +597,7 @@ fsl,tclk-period = <5>; fsl,tmr-prsc = <2>; fsl,tmr-add = <0xaaaaaaab>; - fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper1 = <999999995>; fsl,tmr-fiper2 = <99990>; fsl,max-adj = <499999999>; }; @@ -668,7 +690,7 @@ }; }; - usb@8600000 { + usb2: usb@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x0 0x8600000 0x0 0x1000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; @@ -676,7 +698,7 @@ phy_type = "ulpi"; }; - usb3@3100000 { + usb3: usb3@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; @@ -730,5 +752,41 @@ <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; }; + + can0: can@2a70000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a70000 0x0 0x1000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + }; + + can1: can@2a80000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a80000 0x0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + }; + + can2: can@2a90000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a90000 0x0 0x1000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + }; + + can3: can@2aa0000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2aa0000 0x0 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + }; }; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 2d7a0752a460..d2e3eeaa1a5f 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -286,6 +286,11 @@ clock-names = "stmmaceth"; }; +&gpio_intc { + compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc"; + status = "okay"; +}; + &hwrng { compatible = "amlogic,meson8-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -308,6 +313,9 @@ arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; arm,filter-ranges = <0x100000 0xc0000000>; + prefetch-data = <1>; + prefetch-instr = <1>; + arm,shared-override; }; &pwm_ab { @@ -321,9 +329,8 @@ &saradc { compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; clocks = <&clkc CLKID_XTAL>, - <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SANA>; - clock-names = "clkin", "core", "sana"; + <&clkc CLKID_SAR_ADC>; + clock-names = "clkin", "core"; }; &sdio { @@ -337,19 +344,27 @@ }; &uart_AO { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clock-names = "baud", "xtal", "pclk"; }; &uart_A { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>; + clock-names = "baud", "xtal", "pclk"; }; &uart_B { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>; + clock-names = "baud", "xtal", "pclk"; }; &uart_C { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>; + clock-names = "baud", "xtal", "pclk"; }; &usb0 { diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index d75e0ceda8bb..7cd03ed3742e 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -223,6 +223,9 @@ arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; arm,filter-ranges = <0x100000 0xc0000000>; + prefetch-data = <1>; + prefetch-instr = <1>; + arm,shared-override; }; &pwm_ab { @@ -236,9 +239,8 @@ &saradc { compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; clocks = <&clkc CLKID_XTAL>, - <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SANA>; - clock-names = "clkin", "core", "sana"; + <&clkc CLKID_SAR_ADC>; + clock-names = "clkin", "core"; }; &sdio { @@ -248,19 +250,27 @@ }; &uart_AO { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clock-names = "baud", "xtal", "pclk"; }; &uart_A { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>; + clock-names = "baud", "xtal", "pclk"; }; &uart_B { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>; + clock-names = "baud", "xtal", "pclk"; }; &uart_C { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>; + clock-names = "baud", "xtal", "pclk"; }; &usb0 { diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index 36cfa215620d..43aaa67fcd87 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -32,6 +32,18 @@ status = "okay"; }; + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + macb0: ethernet@fffbc000 { phy-mode = "rmii"; status = "okay"; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 965ddfbc9953..05557fce0f1d 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -604,6 +604,7 @@ compatible = "mediatek,mt2701-hifsys", "syscon"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb0: usb@1a1c0000 { @@ -688,6 +689,7 @@ compatible = "mediatek,mt2701-ethsys", "syscon"; reg = <0 0x1b000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; eth: ethernet@1b100000 { diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 0640fb75bf59..b750da5362f7 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -641,7 +641,7 @@ mmc0: mmc@11230000 { compatible = "mediatek,mt7623-mmc", - "mediatek,mt8135-mmc"; + "mediatek,mt2701-mmc"; reg = <0 0x11230000 0 0x1000>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>; clocks = <&pericfg CLK_PERI_MSDC30_0>, @@ -652,7 +652,7 @@ mmc1: mmc@11240000 { compatible = "mediatek,mt7623-mmc", - "mediatek,mt8135-mmc"; + "mediatek,mt2701-mmc"; reg = <0 0x11240000 0 0x1000>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>; clocks = <&pericfg CLK_PERI_MSDC30_1>, @@ -758,6 +758,7 @@ "syscon"; reg = <0 0x1b000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; eth: ethernet@1b100000 { diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 688a86378cee..7bf5aa2237c9 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -204,7 +204,7 @@ bus-width = <4>; max-frequency = <50000000>; cap-sd-highspeed; - cd-gpios = <&pio 261 0>; + cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; vmmc-supply = <&mt6323_vmch_reg>; vqmmc-supply = <&mt6323_vio18_reg>; }; diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts index 17c578f0d261..e66de8611650 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts @@ -51,7 +51,7 @@ reg = <0x40000 0x80000>; }; - partition@C0000 { + partition@c0000 { label = "uboot-env"; reg = <0xC0000 0x40000>; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index ab6003fe5a43..9dcb18d22cde 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -306,19 +306,19 @@ label = "xloader"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "uboot"; reg = <0x80000 0x1e0000>; }; - partition@0x260000 { + partition@260000 { label = "uboot environment"; reg = <0x260000 0x40000>; }; - partition@0x2a0000 { + partition@2a0000 { label = "linux"; reg = <0x2a0000 0x400000>; }; - partition@0x6a0000 { + partition@6a0000 { label = "rootfs"; reg = <0x6a0000 0x1f880000>; }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 5a4ba0aea447..a14303b09ae2 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -90,19 +90,19 @@ label = "X-Loader"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x80000 0x1c0000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x240000 0x40000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x780000 0x1f880000>; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 3dc56fb156b7..4170be70460e 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -86,7 +86,7 @@ /* lcd panel */ lcd: td028ttec1@0 { - compatible = "toppoly,td028ttec1"; + compatible = "tpo,td028ttec1"; reg = <0>; spi-max-frequency = <100000>; spi-cpol; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 7ada1e93e166..cf7a2a72348d 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -405,22 +405,22 @@ reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "u-boot"; reg = <0x80000 0x1e0000>; }; - partition@0x260000 { + partition@260000 { label = "u-boot-environment"; reg = <0x260000 0x20000>; }; - partition@0x280000 { + partition@280000 { label = "kernel"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "filesystem"; reg = <0x780000 0xf880000>; }; diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 39e35f8b8206..e44d93fc644c 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "omap3-n950-n9.dtsi" +#include <dt-bindings/input/input.h> / { model = "Nokia N9"; @@ -72,3 +73,9 @@ st,max-limit-y = <46>; st,max-limit-z = <46>; }; + +&twl_keypad { + linux,keymap = < MATRIX_KEY(6, 8, KEY_VOLUMEUP) + MATRIX_KEY(7, 8, KEY_VOLUMEDOWN) + >; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index e7c7b8e50703..ab930581fc7a 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -35,6 +35,8 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + display0 = &lcd; + display1 = &tv; }; cpus { @@ -558,7 +560,7 @@ tlv320aic3x: tlv320aic3x@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ ai3x-gpio-func = < 0 /* AIC3X_GPIO1_FUNC_DISABLED */ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ @@ -575,7 +577,7 @@ tlv320aic3x_aux: tlv320aic3x@19 { compatible = "ti,tlv320aic3x"; reg = <0x19>; - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ AVDD-supply = <&vmmc2>; DRVDD-supply = <&vmmc2>; @@ -778,6 +780,8 @@ reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ + lens-focus = <&ad5820>; + port { csi_cam1: endpoint { bus-type = <3>; /* CCP2 */ @@ -966,7 +970,7 @@ ti,esd-recovery-timeout-ms = <8000>; }; - acx565akm@2 { + lcd: acx565akm@2 { compatible = "sony,acx565akm"; spi-max-frequency = <6000000>; reg = <2>; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index c354a1ed1e70..2354e09343f3 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -51,6 +51,26 @@ }; }; +&omap3_pmx_core { + dsi_pins: pinmux_dsi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE1) /* dsi_dx1 - clk+ */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE1) /* dsi_dy1 - clk- */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE1) /* dsi_dx2 - data1+ */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE1) /* dsi_dy2 - data1- */ + >; + }; + + display_pins: pinmux_display_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */ + >; + }; +}; + &i2c2 { smia_1: camera@10 { compatible = "nokia,smia"; @@ -186,3 +206,71 @@ st,max-limit-y = <32>; st,max-limit-z = <32>; }; + +&dss { + status = "ok"; + + vdda_video-supply = <&vdac>; +}; + +&dsi { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dsi_pins>; + + vdd-supply = <&vpll2>; + + port { + dsi_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <2 3 0 1 4 5>; + }; + }; + + lcd0: display { + compatible = "nokia,himalaya", "panel-dsi-cm"; + label = "lcd0"; + + pinctrl-names = "default"; + pinctrl-0 = <&display_pins>; + + vpnl-supply = <&vmmc2>; + vddi-supply = <&vio>; + + reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ + te-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; /* 62 */ + + width-mm = <49>; /* 48.960 mm */ + height-mm = <88>; /* 88.128 mm */ + + /* TODO: + * - panel is upside-down + * - top + bottom 5px are not visible + */ + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <480>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <864>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi_out_ep>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index cd53dc6c0051..f83b1029b3b7 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -627,7 +627,7 @@ lcd: lcd@1 { reg = <1>; /* CS1 */ - compatible = "omapdss,tpo,td043mtea1"; + compatible = "tpo,td043mtea1"; spi-max-frequency = <100000>; spi-cpol; spi-cpha; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index bb33935df7b0..a005802cd52b 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -587,20 +587,6 @@ dma-names = "rx"; }; - smartreflex_core: smartreflex@480cb000 { - compatible = "ti,omap3-smartreflex-core"; - ti,hwmods = "smartreflex_core"; - reg = <0x480cb000 0x400>; - interrupts = <19>; - }; - - smartreflex_mpu_iva: smartreflex@480c9000 { - compatible = "ti,omap3-smartreflex-iva"; - ti,hwmods = "smartreflex_mpu_iva"; - reg = <0x480c9000 0x400>; - interrupts = <18>; - }; - timer1: timer@48318000 { compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index ac4f8795b756..f572a477f74c 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/media/omap3-isp.h> #include "omap3.dtsi" @@ -61,6 +62,44 @@ compatible = "ti,omap34xx-bandgap"; #thermal-sensor-cells = <0>; }; + + target-module@480cb000 { + compatible = "ti,sysc-omap3430-sr", "ti,sysc"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb024 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>; + clocks = <&sr2_fck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480cb000 0x001000>; + + smartreflex_core: smartreflex@0 { + compatible = "ti,omap3-smartreflex-core"; + reg = <0 0x400>; + interrupts = <19>; + }; + }; + + target-module@480c9000 { + compatible = "ti,sysc-omap3430-sr", "ti,sysc"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9024 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>; + clocks = <&sr1_fck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480c9000 0x001000>; + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-mpu-iva"; + reg = <0 0x400>; + interrupts = <18>; + }; + }; }; thermal_zones: thermal-zones { diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index ade31d74c70c..6fb23ada1f64 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/media/omap3-isp.h> #include "omap3.dtsi" @@ -93,6 +94,51 @@ compatible = "ti,omap36xx-bandgap"; #thermal-sensor-cells = <0>; }; + + target-module@480cb000 { + compatible = "ti,sysc-omap3630-sr", "ti,sysc"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&sr2_fck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480cb000 0x001000>; + + smartreflex_core: smartreflex@0 { + compatible = "ti,omap3-smartreflex-core"; + reg = <0 0x400>; + interrupts = <19>; + }; + }; + + target-module@480c9000 { + compatible = "ti,sysc-omap3630-sr", "ti,sysc"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&sr1_fck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480c9000 0x001000>; + + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-mpu-iva"; + reg = <0 0x400>; + interrupts = <18>; + }; + }; }; thermal_zones: thermal-zones { diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 24a463f8641f..b21084da490b 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -177,6 +177,10 @@ vddi-supply = <&lcd_regulator>; reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + width-mm = <50>; + height-mm = <89>; + backlight = <&lcd_backlight>; + panel-timing { clock-frequency = <0>; /* Calculated by dsi */ @@ -346,7 +350,7 @@ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - backlight { + lcd_backlight: backlight { compatible = "ti,lm3532-backlight"; lcd { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index cc1a07a3620f..475904894b86 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -6,9 +6,12 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/omap4.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/omap.h> +#include <dt-bindings/clock/omap4.h> / { compatible = "ti,omap4430", "ti,omap4"; @@ -143,8 +146,11 @@ ranges = <0 0x4a000000 0x1000000>; cm1: cm1@4000 { - compatible = "ti,omap4-cm1"; + compatible = "ti,omap4-cm1", "simple-bus"; reg = <0x4000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4000 0x2000>; cm1_clocks: clocks { #address-cells = <1>; @@ -156,8 +162,11 @@ }; cm2: cm2@8000 { - compatible = "ti,omap4-cm2"; + compatible = "ti,omap4-cm2", "simple-bus"; reg = <0x8000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8000 0x3000>; cm2_clocks: clocks { #address-cells = <1>; @@ -243,6 +252,9 @@ compatible = "ti,omap4-prm"; reg = <0x6000 0x3000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x6000 0x3000>; prm_clocks: clocks { #address-cells = <1>; @@ -383,11 +395,18 @@ }; target-module@48076000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "slimbus2"; reg = <0x48076000 0x4>, <0x48076010 0x4>; reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x48076000 0x001000>; @@ -456,11 +475,17 @@ }; target-module@4a0db000 { - compatible = "ti,sysc-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_iva"; - reg = <0x4a0db000 0x4>, - <0x4a0db008 0x4>; - reg-names = "rev", "sysc"; + reg = <0x4a0db038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x4a0db000 0x001000>; @@ -473,11 +498,17 @@ }; target-module@4a0dd000 { - compatible = "ti,sysc-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_core"; - reg = <0x4a0dd000 0x4>, - <0x4a0dd008 0x4>; - reg-names = "rev", "sysc"; + reg = <0x4a0dd038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x4a0dd000 0x001000>; @@ -490,11 +521,17 @@ }; target-module@4a0d9000 { - compatible = "ti,sysc-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_mpu"; - reg = <0x4a0d9000 0x4>, - <0x4a0d9008 0x4>; - reg-names = "rev", "sysc"; + reg = <0x4a0d9038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x4a0d9000 0x001000>; @@ -674,7 +711,7 @@ reg-names = "sys", "gdd"; ti,hwmods = "hsi"; - clocks = <&hsi_fck>; + clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; clock-names = "hsi_fck"; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; @@ -710,11 +747,23 @@ }; target-module@52000000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "iss"; reg = <0x52000000 0x4>, <0x52000010 0x4>; reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-delay-us = <2>; + clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x52000000 0x1000000>; @@ -817,10 +866,17 @@ }; target-module@40128000 { - compatible = "ti,sysc-mcasp"; + compatible = "ti,sysc-mcasp", "ti,sysc"; ti,hwmods = "mcasp"; - reg = <0x40128004 0x4>; - reg-names = "sysc"; + reg = <0x40128000 0x4>, + <0x40128004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x40128000 0x1000>, /* MPU */ @@ -835,11 +891,18 @@ }; target-module@4012c000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "slimbus1"; reg = <0x4012c000 0x4>, <0x4012c010 0x4>; reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */ @@ -849,11 +912,20 @@ }; target-module@401f1000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "aess"; reg = <0x401f1000 0x4>, <0x401f1010 0x4>; reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */ @@ -955,11 +1027,21 @@ }; target-module@4a10a000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "fdif"; reg = <0x4a10a000 0x4>, <0x4a10a010 0x4>; reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-delay-us = <2>; + clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x4a10a000 0x1000>; @@ -973,6 +1055,8 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer1"; ti,timer-alwon; + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; + clock-names = "fck"; }; timer2: timer@48032000 { @@ -1182,11 +1266,21 @@ }; target-module@56000000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "gpu"; reg = <0x5601fc00 0x4>, <0x5601fc10 0x4>; reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x56000000 0x2000000>; @@ -1202,7 +1296,7 @@ reg = <0x58000000 0x80>; status = "disabled"; ti,hwmods = "dss_core"; - clocks = <&dss_dss_clk>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; @@ -1213,7 +1307,7 @@ reg = <0x58001000 0x1000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "dss_dispc"; - clocks = <&dss_dss_clk>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; }; @@ -1222,7 +1316,7 @@ reg = <0x58002000 0x1000>; status = "disabled"; ti,hwmods = "dss_rfbi"; - clocks = <&dss_dss_clk>, <&l3_div_ck>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>; clock-names = "fck", "ick"; }; @@ -1231,7 +1325,7 @@ reg = <0x58003000 0x1000>; status = "disabled"; ti,hwmods = "dss_venc"; - clocks = <&dss_tv_clk>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; clock-names = "fck"; }; @@ -1244,7 +1338,8 @@ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; ti,hwmods = "dss_dsi1"; - clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; }; @@ -1257,7 +1352,8 @@ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; ti,hwmods = "dss_dsi2"; - clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; }; @@ -1271,7 +1367,8 @@ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; ti,hwmods = "dss_hdmi"; - clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; dmas = <&sdma 76>; dma-names = "audio_tx"; @@ -1280,4 +1377,4 @@ }; }; -/include/ "omap44xx-clocks.dtsi" +#include "omap44xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 05732ed4f50f..279ff2f419df 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -174,14 +174,6 @@ ti,index-power-of-two; }; - aess_fclk: aess_fclk@528 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&abe_clk>; - ti,bit-shift = <24>; - ti,max-div = <2>; - reg = <0x0528>; - }; dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; @@ -464,7 +456,7 @@ ocp_abe_iclk: ocp_abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; - clocks = <&aess_fclk>; + clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>; ti,bit-shift = <24>; reg = <0x0528>; ti,dividers = <2>, <1>; @@ -478,156 +470,13 @@ clock-div = <4>; }; - dmic_sync_mux_ck: dmic_sync_mux_ck@538 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; - ti,bit-shift = <25>; - reg = <0x0538>; - }; - - func_dmic_abe_gfclk: func_dmic_abe_gfclk@538 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; - ti,bit-shift = <24>; - reg = <0x0538>; - }; - - mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; - ti,bit-shift = <25>; - reg = <0x0540>; - }; - - func_mcasp_abe_gfclk: func_mcasp_abe_gfclk@540 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; - ti,bit-shift = <24>; - reg = <0x0540>; - }; - - mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck@548 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; - ti,bit-shift = <25>; - reg = <0x0548>; - }; - - func_mcbsp1_gfclk: func_mcbsp1_gfclk@548 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; - ti,bit-shift = <24>; - reg = <0x0548>; - }; - - mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck@550 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; - ti,bit-shift = <25>; - reg = <0x0550>; - }; - - func_mcbsp2_gfclk: func_mcbsp2_gfclk@550 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; - ti,bit-shift = <24>; - reg = <0x0550>; - }; - - mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck@558 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; - ti,bit-shift = <25>; - reg = <0x0558>; - }; - - func_mcbsp3_gfclk: func_mcbsp3_gfclk@558 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; - ti,bit-shift = <24>; - reg = <0x0558>; - }; - - slimbus1_fclk_1: slimbus1_fclk_1@560 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&func_24m_clk>; - ti,bit-shift = <9>; - reg = <0x0560>; - }; - - slimbus1_fclk_0: slimbus1_fclk_0@560 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&abe_24m_fclk>; - ti,bit-shift = <8>; - reg = <0x0560>; - }; - - slimbus1_fclk_2: slimbus1_fclk_2@560 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&pad_clks_ck>; - ti,bit-shift = <10>; - reg = <0x0560>; - }; - - slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&slimbus_clk>; - ti,bit-shift = <11>; - reg = <0x0560>; - }; - - timer5_sync_mux: timer5_sync_mux@568 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x0568>; - }; - - timer6_sync_mux: timer6_sync_mux@570 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x0570>; - }; - - timer7_sync_mux: timer7_sync_mux@578 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x0578>; - }; - - timer8_sync_mux: timer8_sync_mux@580 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x0580>; - }; - dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; }; }; + &prm_clocks { sys_clkin_ck: sys_clkin_ck@110 { #clock-cells = <0>; @@ -675,22 +524,6 @@ ti,max-div = <2>; }; - gpio1_dbclk: gpio1_dbclk@1838 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1838>; - }; - - dmt1_clk_mux: dmt1_clk_mux@1840 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1840>; - }; - usim_ck: usim_ck@1858 { #clock-cells = <0>; compatible = "ti,divider-clock"; @@ -708,45 +541,10 @@ reg = <0x1858>; }; - pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck@1a20 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>; - ti,bit-shift = <20>; - reg = <0x1a20>; - }; - - pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck@1a20 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>; - ti,bit-shift = <22>; - reg = <0x1a20>; - }; - - stm_clk_div_ck: stm_clk_div_ck@1a20 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&pmd_stm_clock_mux_ck>; - ti,bit-shift = <27>; - ti,max-div = <64>; - reg = <0x1a20>; - ti,index-power-of-two; - }; - - trace_clk_div_div_ck: trace_clk_div_div_ck@1a20 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&pmd_trace_clk_mux_ck>; - ti,bit-shift = <24>; - reg = <0x1a20>; - ti,dividers = <0>, <1>, <2>, <0>, <4>; - }; - trace_clk_div_ck: trace_clk_div_ck { #clock-cells = <0>; compatible = "ti,clkdm-gate-clock"; - clocks = <&trace_clk_div_div_ck>; + clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>; }; }; @@ -975,155 +773,6 @@ ti,max-div = <2>; }; - dss_sys_clk: dss_sys_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&syc_clk_div_ck>; - ti,bit-shift = <10>; - reg = <0x1120>; - }; - - dss_tv_clk: dss_tv_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&extalt_clkin_ck>; - ti,bit-shift = <11>; - reg = <0x1120>; - }; - - dss_dss_clk: dss_dss_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_per_m5x2_ck>; - ti,bit-shift = <8>; - reg = <0x1120>; - ti,set-rate-parent; - }; - - dss_48mhz_clk: dss_48mhz_clk@1120 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&func_48mc_fclk>; - ti,bit-shift = <9>; - reg = <0x1120>; - }; - - fdif_fck: fdif_fck@1028 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll_per_m4x2_ck>; - ti,bit-shift = <24>; - ti,max-div = <4>; - reg = <0x1028>; - ti,index-power-of-two; - }; - - gpio2_dbclk: gpio2_dbclk@1460 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1460>; - }; - - gpio3_dbclk: gpio3_dbclk@1468 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1468>; - }; - - gpio4_dbclk: gpio4_dbclk@1470 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1470>; - }; - - gpio5_dbclk: gpio5_dbclk@1478 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1478>; - }; - - gpio6_dbclk: gpio6_dbclk@1480 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1480>; - }; - - sgx_clk_mux: sgx_clk_mux@1220 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>; - ti,bit-shift = <24>; - reg = <0x1220>; - }; - - hsi_fck: hsi_fck@1338 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - ti,max-div = <4>; - reg = <0x1338>; - ti,index-power-of-two; - }; - - iss_ctrlclk: iss_ctrlclk@1020 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&func_96m_fclk>; - ti,bit-shift = <8>; - reg = <0x1020>; - }; - - mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck@14e0 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>; - ti,bit-shift = <25>; - reg = <0x14e0>; - }; - - per_mcbsp4_gfclk: per_mcbsp4_gfclk@14e0 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>; - ti,bit-shift = <24>; - reg = <0x14e0>; - }; - - hsmmc1_fclk: hsmmc1_fclk@1328 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_64m_fclk>, <&func_96m_fclk>; - ti,bit-shift = <24>; - reg = <0x1328>; - }; - - hsmmc2_fclk: hsmmc2_fclk@1330 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_64m_fclk>, <&func_96m_fclk>; - ti,bit-shift = <24>; - reg = <0x1330>; - }; - - ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m@13e0 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&func_48m_fclk>; - ti,bit-shift = <8>; - reg = <0x13e0>; - }; - sha2md5_fck: sha2md5_fck@15c8 { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -1132,222 +781,6 @@ reg = <0x15c8>; }; - slimbus2_fclk_1: slimbus2_fclk_1@1538 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_abe_24m_fclk>; - ti,bit-shift = <9>; - reg = <0x1538>; - }; - - slimbus2_fclk_0: slimbus2_fclk_0@1538 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&func_24mc_fclk>; - ti,bit-shift = <8>; - reg = <0x1538>; - }; - - slimbus2_slimbus_clk: slimbus2_slimbus_clk@1538 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&pad_slimbus_core_clks_ck>; - ti,bit-shift = <10>; - reg = <0x1538>; - }; - - smartreflex_core_fck: smartreflex_core_fck@638 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4_wkup_clk_mux_ck>; - ti,bit-shift = <1>; - reg = <0x0638>; - }; - - smartreflex_iva_fck: smartreflex_iva_fck@630 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4_wkup_clk_mux_ck>; - ti,bit-shift = <1>; - reg = <0x0630>; - }; - - smartreflex_mpu_fck: smartreflex_mpu_fck@628 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4_wkup_clk_mux_ck>; - ti,bit-shift = <1>; - reg = <0x0628>; - }; - - cm2_dm10_mux: cm2_dm10_mux@1428 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1428>; - }; - - cm2_dm11_mux: cm2_dm11_mux@1430 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1430>; - }; - - cm2_dm2_mux: cm2_dm2_mux@1438 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1438>; - }; - - cm2_dm3_mux: cm2_dm3_mux@1440 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1440>; - }; - - cm2_dm4_mux: cm2_dm4_mux@1448 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1448>; - }; - - cm2_dm9_mux: cm2_dm9_mux@1450 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1450>; - }; - - usb_host_fs_fck: usb_host_fs_fck@13d0 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&func_48mc_fclk>; - ti,bit-shift = <1>; - reg = <0x13d0>; - }; - - utmi_p1_gfclk: utmi_p1_gfclk@1358 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>; - ti,bit-shift = <24>; - reg = <0x1358>; - }; - - usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk@1358 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&utmi_p1_gfclk>; - ti,bit-shift = <8>; - reg = <0x1358>; - }; - - utmi_p2_gfclk: utmi_p2_gfclk@1358 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>; - ti,bit-shift = <25>; - reg = <0x1358>; - }; - - usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk@1358 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&utmi_p2_gfclk>; - ti,bit-shift = <9>; - reg = <0x1358>; - }; - - usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk@1358 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&init_60m_fclk>; - ti,bit-shift = <10>; - reg = <0x1358>; - }; - - usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk@1358 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_usb_m2_ck>; - ti,bit-shift = <13>; - reg = <0x1358>; - }; - - usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk@1358 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&init_60m_fclk>; - ti,bit-shift = <11>; - reg = <0x1358>; - }; - - usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk@1358 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&init_60m_fclk>; - ti,bit-shift = <12>; - reg = <0x1358>; - }; - - usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk@1358 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_usb_m2_ck>; - ti,bit-shift = <14>; - reg = <0x1358>; - }; - - usb_host_hs_func48mclk: usb_host_hs_func48mclk@1358 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&func_48mc_fclk>; - ti,bit-shift = <15>; - reg = <0x1358>; - }; - - usb_host_hs_fck: usb_host_hs_fck@1358 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&init_60m_fclk>; - ti,bit-shift = <1>; - reg = <0x1358>; - }; - - otg_60m_gfclk: otg_60m_gfclk@1360 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>; - ti,bit-shift = <24>; - reg = <0x1360>; - }; - - usb_otg_hs_xclk: usb_otg_hs_xclk@1360 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&otg_60m_gfclk>; - ti,bit-shift = <8>; - reg = <0x1360>; - }; - - usb_otg_hs_ick: usb_otg_hs_ick@1360 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <0>; - reg = <0x1360>; - }; - usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -1355,44 +788,12 @@ ti,bit-shift = <8>; reg = <0x0640>; }; - - usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk@1368 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&init_60m_fclk>; - ti,bit-shift = <10>; - reg = <0x1368>; - }; - - usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk@1368 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&init_60m_fclk>; - ti,bit-shift = <8>; - reg = <0x1368>; - }; - - usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk@1368 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&init_60m_fclk>; - ti,bit-shift = <9>; - reg = <0x1368>; - }; - - usb_tll_hs_ick: usb_tll_hs_ick@1368 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4_div_ck>; - ti,bit-shift = <0>; - reg = <0x1368>; - }; }; &cm2_clockdomains { l3_init_clkdm: l3_init_clkdm { compatible = "ti,clockdomain"; - clocks = <&dpll_usb_ck>, <&usb_host_fs_fck>; + clocks = <&dpll_usb_ck>; }; }; @@ -1631,3 +1032,291 @@ reg = <0x0224>; }; }; + +&cm1 { + mpuss_cm: mpuss_cm@300 { + compatible = "ti,omap4-cm"; + reg = <0x300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300 0x100>; + + mpuss_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + tesla_cm: tesla_cm@400 { + compatible = "ti,omap4-cm"; + reg = <0x400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x100>; + + tesla_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + abe_cm: abe_cm@500 { + compatible = "ti,omap4-cm"; + reg = <0x500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x500 0x100>; + + abe_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x6c>; + #clock-cells = <2>; + }; + }; + +}; + +&cm2 { + l4_ao_cm: l4_ao_cm@600 { + compatible = "ti,omap4-cm"; + reg = <0x600 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x600 0x100>; + + l4_ao_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x1c>; + #clock-cells = <2>; + }; + }; + + l3_1_cm: l3_1_cm@700 { + compatible = "ti,omap4-cm"; + reg = <0x700 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x700 0x100>; + + l3_1_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_2_cm: l3_2_cm@800 { + compatible = "ti,omap4-cm"; + reg = <0x800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x100>; + + l3_2_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x14>; + #clock-cells = <2>; + }; + }; + + ducati_cm: ducati_cm@900 { + compatible = "ti,omap4-cm"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x900 0x100>; + + ducati_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_dma_cm: l3_dma_cm@a00 { + compatible = "ti,omap4-cm"; + reg = <0xa00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa00 0x100>; + + l3_dma_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_emif_cm: l3_emif_cm@b00 { + compatible = "ti,omap4-cm"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb00 0x100>; + + l3_emif_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x1c>; + #clock-cells = <2>; + }; + }; + + d2d_cm: d2d_cm@c00 { + compatible = "ti,omap4-cm"; + reg = <0xc00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xc00 0x100>; + + d2d_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l4_cfg_cm: l4_cfg_cm@d00 { + compatible = "ti,omap4-cm"; + reg = <0xd00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd00 0x100>; + + l4_cfg_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x14>; + #clock-cells = <2>; + }; + }; + + l3_instr_cm: l3_instr_cm@e00 { + compatible = "ti,omap4-cm"; + reg = <0xe00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe00 0x100>; + + l3_instr_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x24>; + #clock-cells = <2>; + }; + }; + + ivahd_cm: ivahd_cm@f00 { + compatible = "ti,omap4-cm"; + reg = <0xf00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xf00 0x100>; + + ivahd_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc>; + #clock-cells = <2>; + }; + }; + + iss_cm: iss_cm@1000 { + compatible = "ti,omap4-cm"; + reg = <0x1000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x100>; + + iss_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc>; + #clock-cells = <2>; + }; + }; + + l3_dss_cm: l3_dss_cm@1100 { + compatible = "ti,omap4-cm"; + reg = <0x1100 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1100 0x100>; + + l3_dss_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_gfx_cm: l3_gfx_cm@1200 { + compatible = "ti,omap4-cm"; + reg = <0x1200 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1200 0x100>; + + l3_gfx_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3_init_cm: l3_init_cm@1300 { + compatible = "ti,omap4-cm"; + reg = <0x1300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1300 0x100>; + + l3_init_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc4>; + #clock-cells = <2>; + }; + }; + + l4_per_cm: l4_per_cm@1400 { + compatible = "ti,omap4-cm"; + reg = <0x1400 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1400 0x200>; + + l4_per_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x144>; + #clock-cells = <2>; + }; + }; + +}; + +&prm { + l4_wkup_cm: l4_wkup_cm@1800 { + compatible = "ti,omap4-cm"; + reg = <0x1800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1800 0x100>; + + l4_wkup_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x5c>; + #clock-cells = <2>; + }; + }; + + emu_sys_cm: emu_sys_cm@1a00 { + compatible = "ti,omap4-cm"; + reg = <0x1a00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1a00 0x100>; + + emu_sys_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 51a7fb3d7b9a..35d4298da83d 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/omap.h> +#include <dt-bindings/clock/omap5.h> / { #address-cells = <2>; @@ -201,8 +202,12 @@ }; cm_core_aon: cm_core_aon@4000 { - compatible = "ti,omap5-cm-core-aon"; + compatible = "ti,omap5-cm-core-aon", + "simple-bus"; reg = <0x4000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4000 0x2000>; cm_core_aon_clocks: clocks { #address-cells = <1>; @@ -214,8 +219,11 @@ }; cm_core: cm_core@8000 { - compatible = "ti,omap5-cm-core"; + compatible = "ti,omap5-cm-core", "simple-bus"; reg = <0x8000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8000 0x3000>; cm_core_clocks: clocks { #address-cells = <1>; @@ -240,9 +248,12 @@ }; prm: prm@6000 { - compatible = "ti,omap5-prm"; + compatible = "ti,omap5-prm", "simple-bus"; reg = <0x6000 0x3000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x6000 0x3000>; prm_clocks: clocks { #address-cells = <1>; @@ -734,6 +745,8 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer1"; ti,timer-alwon; + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; + clock-names = "fck"; }; timer2: timer@48032000 { @@ -893,7 +906,8 @@ compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; syscon-phy-power = <&scm_conf 0x300>; - clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; + clocks = <&usb_phy_cm_clk32k>, + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; }; @@ -907,7 +921,7 @@ syscon-phy-power = <&scm_conf 0x370>; clocks = <&usb_phy_cm_clk32k>, <&sys_clkin>, - <&usb_otg_ss_refclk960m>; + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; clock-names = "wkupclk", "sysclk", "refclk"; @@ -976,7 +990,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; syscon-phy-power = <&scm_conf 0x374>; - clocks = <&sys_clkin>, <&sata_ref_clk>; + clocks = <&sys_clkin>, + <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; @@ -988,7 +1003,7 @@ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; phys = <&sata_phy>; phy-names = "sata-phy"; - clocks = <&sata_ref_clk>; + clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; ti,hwmods = "sata"; ports-implemented = <0x1>; }; @@ -998,7 +1013,7 @@ reg = <0x58000000 0x80>; status = "disabled"; ti,hwmods = "dss_core"; - clocks = <&dss_dss_clk>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; @@ -1009,7 +1024,7 @@ reg = <0x58001000 0x1000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "dss_dispc"; - clocks = <&dss_dss_clk>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; }; @@ -1018,7 +1033,7 @@ reg = <0x58002000 0x100>; status = "disabled"; ti,hwmods = "dss_rfbi"; - clocks = <&dss_dss_clk>, <&l3_iclk_div>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>; clock-names = "fck", "ick"; }; @@ -1031,7 +1046,8 @@ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; ti,hwmods = "dss_dsi1"; - clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; }; @@ -1044,7 +1060,8 @@ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; ti,hwmods = "dss_dsi2"; - clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; }; @@ -1058,7 +1075,8 @@ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; ti,hwmods = "dss_hdmi"; - clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; dmas = <&sdma 76>; dma-names = "audio_tx"; @@ -1132,7 +1150,7 @@ coefficients = <65 (-1791)>; }; -/include/ "omap54xx-clocks.dtsi" +#include "omap54xx-clocks.dtsi" &gpu_thermal { coefficients = <117 (-2992)>; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 529193442620..9619a746d657 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -432,22 +432,6 @@ reg = <0x0528>; }; - dmic_sync_mux_ck: dmic_sync_mux_ck@538 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; - ti,bit-shift = <26>; - reg = <0x0538>; - }; - - dmic_gfclk: dmic_gfclk@538 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; - ti,bit-shift = <24>; - reg = <0x0538>; - }; - mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -464,86 +448,6 @@ reg = <0x0540>; }; - mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck@548 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; - ti,bit-shift = <26>; - reg = <0x0548>; - }; - - mcbsp1_gfclk: mcbsp1_gfclk@548 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; - ti,bit-shift = <24>; - reg = <0x0548>; - }; - - mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck@550 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; - ti,bit-shift = <26>; - reg = <0x0550>; - }; - - mcbsp2_gfclk: mcbsp2_gfclk@550 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; - ti,bit-shift = <24>; - reg = <0x0550>; - }; - - mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck@558 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; - ti,bit-shift = <26>; - reg = <0x0558>; - }; - - mcbsp3_gfclk: mcbsp3_gfclk@558 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; - ti,bit-shift = <24>; - reg = <0x0558>; - }; - - timer5_gfclk_mux: timer5_gfclk_mux@568 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x0568>; - }; - - timer6_gfclk_mux: timer6_gfclk_mux@570 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x0570>; - }; - - timer7_gfclk_mux: timer7_gfclk_mux@578 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x0578>; - }; - - timer8_gfclk_mux: timer8_gfclk_mux@580 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x0580>; - }; - dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -603,23 +507,8 @@ clock-mult = <1>; clock-div = <1>; }; - - gpio1_dbclk: gpio1_dbclk@1938 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1938>; - }; - - timer1_gfclk_mux: timer1_gfclk_mux@1940 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1940>; - }; }; + &cm_core_clocks { dpll_per_byp_mux: dpll_per_byp_mux@14c { @@ -825,95 +714,6 @@ ti,dividers = <1>, <8>; }; - dss_32khz_clk: dss_32khz_clk@1420 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <11>; - reg = <0x1420>; - }; - - dss_48mhz_clk: dss_48mhz_clk@1420 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&func_48m_fclk>; - ti,bit-shift = <9>; - reg = <0x1420>; - }; - - dss_dss_clk: dss_dss_clk@1420 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_per_h12x2_ck>; - ti,bit-shift = <8>; - reg = <0x1420>; - ti,set-rate-parent; - }; - - dss_sys_clk: dss_sys_clk@1420 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dss_syc_gfclk_div>; - ti,bit-shift = <10>; - reg = <0x1420>; - }; - - gpio2_dbclk: gpio2_dbclk@1060 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1060>; - }; - - gpio3_dbclk: gpio3_dbclk@1068 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1068>; - }; - - gpio4_dbclk: gpio4_dbclk@1070 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1070>; - }; - - gpio5_dbclk: gpio5_dbclk@1078 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1078>; - }; - - gpio6_dbclk: gpio6_dbclk@1080 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1080>; - }; - - gpio7_dbclk: gpio7_dbclk@1110 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1110>; - }; - - gpio8_dbclk: gpio8_dbclk@1118 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1118>; - }; - iss_ctrlclk: iss_ctrlclk@1320 { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -938,118 +738,6 @@ reg = <0x0f20>; }; - mmc1_32khz_clk: mmc1_32khz_clk@1628 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_32k_ck>; - ti,bit-shift = <8>; - reg = <0x1628>; - }; - - sata_ref_clk: sata_ref_clk@1688 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_clkin>; - ti,bit-shift = <8>; - reg = <0x1688>; - }; - - usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk@1658 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_usb_m2_ck>; - ti,bit-shift = <13>; - reg = <0x1658>; - }; - - usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk@1658 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_usb_m2_ck>; - ti,bit-shift = <14>; - reg = <0x1658>; - }; - - usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk@1658 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_usb_m2_ck>; - ti,bit-shift = <7>; - reg = <0x1658>; - }; - - usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk@1658 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3init_60m_fclk>; - ti,bit-shift = <11>; - reg = <0x1658>; - }; - - usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk@1658 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3init_60m_fclk>; - ti,bit-shift = <12>; - reg = <0x1658>; - }; - - usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk@1658 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3init_60m_fclk>; - ti,bit-shift = <6>; - reg = <0x1658>; - }; - - utmi_p1_gfclk: utmi_p1_gfclk@1658 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>; - ti,bit-shift = <24>; - reg = <0x1658>; - }; - - usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk@1658 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&utmi_p1_gfclk>; - ti,bit-shift = <8>; - reg = <0x1658>; - }; - - utmi_p2_gfclk: utmi_p2_gfclk@1658 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>; - ti,bit-shift = <25>; - reg = <0x1658>; - }; - - usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk@1658 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&utmi_p2_gfclk>; - ti,bit-shift = <9>; - reg = <0x1658>; - }; - - usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk@1658 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3init_60m_fclk>; - ti,bit-shift = <10>; - reg = <0x1658>; - }; - - usb_otg_ss_refclk960m: usb_otg_ss_refclk960m@16f0 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_usb_clkdcoldo>; - ti,bit-shift = <8>; - reg = <0x16f0>; - }; - usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -1058,30 +746,6 @@ reg = <0x0640>; }; - usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk@1668 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3init_60m_fclk>; - ti,bit-shift = <8>; - reg = <0x1668>; - }; - - usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk@1668 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3init_60m_fclk>; - ti,bit-shift = <9>; - reg = <0x1668>; - }; - - usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk@1668 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3init_60m_fclk>; - ti,bit-shift = <10>; - reg = <0x1668>; - }; - fdif_fclk: fdif_fclk@1328 { #clock-cells = <0>; compatible = "ti,divider-clock"; @@ -1115,88 +779,6 @@ ti,max-div = <2>; reg = <0x1638>; }; - - mmc1_fclk_mux: mmc1_fclk_mux@1628 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1628>; - }; - - mmc1_fclk: mmc1_fclk@1628 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&mmc1_fclk_mux>; - ti,bit-shift = <25>; - ti,max-div = <2>; - reg = <0x1628>; - }; - - mmc2_fclk_mux: mmc2_fclk_mux@1630 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; - ti,bit-shift = <24>; - reg = <0x1630>; - }; - - mmc2_fclk: mmc2_fclk@1630 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&mmc2_fclk_mux>; - ti,bit-shift = <25>; - ti,max-div = <2>; - reg = <0x1630>; - }; - - timer10_gfclk_mux: timer10_gfclk_mux@1028 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1028>; - }; - - timer11_gfclk_mux: timer11_gfclk_mux@1030 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1030>; - }; - - timer2_gfclk_mux: timer2_gfclk_mux@1038 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1038>; - }; - - timer3_gfclk_mux: timer3_gfclk_mux@1040 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1040>; - }; - - timer4_gfclk_mux: timer4_gfclk_mux@1048 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1048>; - }; - - timer9_gfclk_mux: timer9_gfclk_mux@1050 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_clkin>, <&sys_32k_ck>; - ti,bit-shift = <24>; - reg = <0x1050>; - }; }; &cm_core_clockdomains { @@ -1394,3 +976,206 @@ reg = <0x021c>; }; }; + +&cm_core_aon { + mpu_cm: mpu_cm@300 { + compatible = "ti,omap4-cm"; + reg = <0x300 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300 0x100>; + + mpu_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + dsp_cm: dsp_cm@400 { + compatible = "ti,omap4-cm"; + reg = <0x400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x100>; + + dsp_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + abe_cm: abe_cm@500 { + compatible = "ti,omap4-cm"; + reg = <0x500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x500 0x100>; + + abe_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x64>; + #clock-cells = <2>; + }; + }; + +}; + +&cm_core { + l3main1_cm: l3main1_cm@700 { + compatible = "ti,omap4-cm"; + reg = <0x700 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x700 0x100>; + + l3main1_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3main2_cm: l3main2_cm@800 { + compatible = "ti,omap4-cm"; + reg = <0x800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x100>; + + l3main2_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + ipu_cm: ipu_cm@900 { + compatible = "ti,omap4-cm"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x900 0x100>; + + ipu_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + dma_cm: dma_cm@a00 { + compatible = "ti,omap4-cm"; + reg = <0xa00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa00 0x100>; + + dma_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + emif_cm: emif_cm@b00 { + compatible = "ti,omap4-cm"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb00 0x100>; + + emif_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x1c>; + #clock-cells = <2>; + }; + }; + + l4cfg_cm: l4cfg_cm@d00 { + compatible = "ti,omap4-cm"; + reg = <0xd00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd00 0x100>; + + l4cfg_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x14>; + #clock-cells = <2>; + }; + }; + + l3instr_cm: l3instr_cm@e00 { + compatible = "ti,omap4-cm"; + reg = <0xe00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe00 0x100>; + + l3instr_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc>; + #clock-cells = <2>; + }; + }; + + l4per_cm: l4per_cm@1000 { + compatible = "ti,omap4-cm"; + reg = <0x1000 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x200>; + + l4per_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x15c>; + #clock-cells = <2>; + }; + }; + + dss_cm: dss_cm@1400 { + compatible = "ti,omap4-cm"; + reg = <0x1400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1400 0x100>; + + dss_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + + l3init_cm: l3init_cm@1600 { + compatible = "ti,omap4-cm"; + reg = <0x1600 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1600 0x100>; + + l3init_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xd4>; + #clock-cells = <2>; + }; + }; +}; + +&prm { + wkupaon_cm: wkupaon_cm@1900 { + compatible = "ti,omap4-cm"; + reg = <0x1900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1900 0x100>; + + wkupaon_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x5c>; + #clock-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi new file mode 100644 index 000000000000..6c26524e93e1 --- /dev/null +++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + label = "u-boot"; + }; + + u-boot-env@60000 { + reg = <0x60000 0x20000>; + label = "u-boot-env"; + }; + + kernel@80000 { + reg = <0x80000 0x440000>; + label = "kernel"; + }; + + rofs@c0000 { + reg = <0x4c0000 0x1740000>; + label = "rofs"; + }; + + rwfs@1c00000 { + reg = <0x1c00000 0x400000>; + label = "rwfs"; + }; +}; diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/owl-s500-sparky.dts new file mode 100644 index 000000000000..c665ce8b88b4 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-sparky.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Allo.com Sparky + * + * Copyright (c) 2017 Andreas Färber + */ + +/dts-v1/; + +#include "owl-s500.dtsi" + +/ { + compatible = "allo,sparky", "actions,s500"; + model = "Allo.com Sparky"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1 or 2 GiB */ + }; + + uart3_clk: uart3-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&timer { + clocks = <&hosc>; +}; + +&uart3 { + status = "okay"; + clocks = <&uart3_clk>; +}; diff --git a/arch/arm/boot/dts/wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts index ac3250ae8fc4..ac3250ae8fc4 100644 --- a/arch/arm/boot/dts/wd-mbwe.dts +++ b/arch/arm/boot/dts/ox810se-wd-mbwe.dts diff --git a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts index bfde32e37123..bfde32e37123 100644 --- a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts +++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index be5177221cbb..927d00cab014 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -52,6 +52,18 @@ }; }; + tcb0: timer@fff7c000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + mmc0: mmc@fff80000 { pinctrl-0 = < &pinctrl_board_mmc diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index d0a5df90b543..643c57f84818 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -265,6 +265,28 @@ bias-pull-up; }; }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; sdhci@f9824900 { @@ -280,6 +302,18 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhci@f98a4900 { + status = "ok"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + bus-width = <4>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + }; + usb@f9a55000 { status = "ok"; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index cd4d5ff7749e..5af2a0116ff2 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -123,7 +123,7 @@ pinctrl-0 = <&i2c2_pins>; eeprom@50 { - compatible = "renesas,24c128", "atmel,24c128"; + compatible = "renesas,r1ex24128", "atmel,24c128"; reg = <0x50>; pagesize = <64>; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index dd4d09712a2a..8e48090e4fdc 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -132,15 +132,12 @@ }; cmt1: timer@e6130000 { - compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2"; + compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1"; reg = <0 0xe6130000 0 0x1004>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; - - renesas,channels-mask = <0xff>; - status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 1788e186a512..03b00d87b39b 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -131,9 +131,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */ - &pfc 91 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pfc 208 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&pfc 91 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <5>; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index d37d22682a63..afd3bc5e6cf2 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -74,9 +74,6 @@ clocks = <&mstp3_clks R8A7740_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; - - renesas,channels-mask = <0x3f>; - status = "disabled"; }; @@ -320,7 +317,7 @@ tpu: pwm@e6600000 { compatible = "renesas,tpu-r8a7740", "renesas,tpu"; - reg = <0xe6600000 0x100>; + reg = <0xe6600000 0x148>; clocks = <&mstp3_clks R8A7740_CLK_TPU0>; power-domains = <&pd_a3sp>; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 7bbba4a36f31..0b74c6c7d21d 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -32,6 +32,40 @@ spi1 = &msiof0; spi2 = &msiof1; spi3 = &msiof2; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; + }; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; cpus { @@ -76,6 +110,29 @@ }; }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -247,16 +304,48 @@ resets = <&cpg 407>; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7743", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7743-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7743-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 329>; + status = "disabled"; }; cpg: clock-controller@e6150000 { @@ -356,6 +445,68 @@ dma-channels = <15>; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <13>; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7743-usb-dmac", "renesas,usb-dmac"; @@ -827,7 +978,8 @@ }; ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7743"; + compatible = "renesas,ether-r8a7743", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; @@ -952,8 +1104,89 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7743", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7743"; + compatible = "renesas,sdhi-r8a7743", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -967,7 +1200,8 @@ }; sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7743"; + compatible = "renesas,sdhi-r8a7743", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -981,7 +1215,8 @@ }; sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7743"; + compatible = "renesas,sdhi-r8a7743", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; @@ -1033,6 +1268,97 @@ }; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7743", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7743", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7743", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7743"; + reg = <0 0xfeb00000 0 0x40000>, + <0 0xfeb90000 0 0x1c>; + reg-names = "du", "lvds.0"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 726>; + clock-names = "du.0", "du.1", "lvds.0"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + + can0: can@e6e80000 { + compatible = "renesas,can-r8a7743", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7743_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7743", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7743_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + pci0: pci@ee090000 { compatible = "renesas,pci-r8a7743", "renesas,pci-rcar-gen2"; @@ -1102,14 +1428,247 @@ phy-names = "usb"; }; }; + + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7743", + "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7743", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7743_CLK_M2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "ctu.0", "ctu.1", + "mix.0", "mix.1", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; }; - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <95000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; /* External USB clock - can be overridden by the board */ @@ -1118,12 +1677,4 @@ #clock-cells = <0>; clock-frequency = <48000000>; }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; }; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts new file mode 100644 index 000000000000..d34de8266ccd --- /dev/null +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -0,0 +1,158 @@ +/* + * Device Tree Source for the iWave-RZG1E SODIMM carrier board + HDMI daughter + * board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "r8a7745-iwg22d-sodimm.dts" + +/ { + model = "iWave RainboW-G22D-SODIMM RZ/G1E based board with HDMI add-on"; + compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"; + + aliases { + serial0 = &scif1; + serial4 = &scif5; + serial6 = &hscif2; + }; + + cec_clock: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&hscif2 { + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cec_clock>; + clock-names = "cec"; + pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&pfc { + can1_pins: can1 { + groups = "can1_data_b"; + function = "can1"; + }; + + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out"; + function = "du0"; + }; + + hscif2_pins: hscif2 { + groups = "hscif2_data"; + function = "hscif2"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1_d"; + function = "i2c1"; + }; + + scif1_pins: scif1 { + groups = "scif1_data"; + function = "scif1"; + }; + + scif5_pins: scif5 { + groups = "scif5_data_d"; + function = "scif5"; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif5 { + pinctrl-0 = <&scif5_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 52153ec3638c..a4058f4cfbcd 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -8,6 +8,29 @@ * kind, whether express or implied. */ +/* + * SSI-SGTL5000 + * + * This command is required when Playback/Capture + * + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + /dts-v1/; #include "r8a7745-iwg22m.dtsi" @@ -16,13 +39,35 @@ compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"; aliases { - serial0 = &scif4; ethernet0 = &avb; + serial3 = &scif4; + serial5 = &hscif1; }; chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = "serial0:115200n8"; + stdout-path = "serial3:115200n8"; + }; + + audio_clock: audio_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + rsnd_sgtl5000: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; vccq_sdhi0: regulator-vccq-sdhi0 { @@ -39,53 +84,139 @@ }; }; -&pfc { - scif4_pins: scif4 { - groups = "scif4_data_b"; - function = "scif4"; +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + /* + * On some older versions of the platform (before R4.0) the phy address + * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. + */ + reg = <3>; + micrel,led-mode = <1>; }; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; +}; + +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&i2c5 { + pinctrl-0 = <&i2c5_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0x0a>; + clocks = <&audio_clock>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pfc { avb_pins: avb { groups = "avb_mdio", "avb_gmii"; function = "avb"; }; + can0_pins: can0 { + groups = "can0_data"; + function = "can0"; + }; + + hscif1_pins: hscif1 { + groups = "hscif1_data", "hscif1_ctrl"; + function = "hscif1"; + }; + + i2c5_pins: i2c5 { + groups = "i2c5_b"; + function = "i2c5"; + }; + + scif4_pins: scif4 { + groups = "scif4_data_b"; + function = "scif4"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; power-source = <3300>; }; + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + usb1_pins: usb1 { groups = "usb1"; function = "usb1"; }; }; -&scif4 { - pinctrl-0 = <&scif4_pins>; +&rcar_sound { + pinctrl-0 = <&sound_pins>; pinctrl-names = "default"; - status = "okay"; + + /* Single DAI */ + + #sound-dai-cells = <0>; + + rcar_sound,dai { + dai0 { + playback = <&ssi3 &src3 &dvc0>; + capture = <&ssi4 &src4 &dvc1>; + }; + }; }; -&avb { - pinctrl-0 = <&avb_pins>; +&scif4 { + pinctrl-0 = <&scif4_pins>; pinctrl-names = "default"; - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; status = "okay"; - - phy3: ethernet-phy@3 { - /* - * On some older versions of the platform (before R4.0) the phy address - * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. - */ - reg = <3>; - micrel,led-mode = <1>; - }; }; &sdhi0 { @@ -98,10 +229,8 @@ status = "okay"; }; -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; +&ssi4 { + shared-pin; }; &usbphy { diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 3a50f703601c..ae918e9cce21 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -25,15 +25,49 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &iic0; + i2c7 = &iic1; spi0 = &qspi; spi1 = &msiof0; spi2 = &msiof1; spi3 = &msiof2; + vin0 = &vin0; + vin1 = &vin1; + }; + + /* + * The external audio clocks are configured as 0 Hz fixed + * frequency clocks by default. Boards that provide audio + * clocks should override them. + */ + audio_clka: audio_clka { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkb: audio_clkb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkc: audio_clkc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -45,6 +79,16 @@ next-level-cache = <&L2_CA7>; }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>; + power-domains = <&sysc R8A7745_PD_CA7_CPU1>; + next-level-cache = <&L2_CA7>; + }; + L2_CA7: cache-controller-0 { compatible = "cache"; cache-unified; @@ -53,6 +97,22 @@ }; }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -61,6 +121,12 @@ #size-cells = <2>; ranges; + apmu@e6151000 { + compatible = "renesas,r8a7745-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -203,16 +269,36 @@ resets = <&cpg 407>; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>; + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7745-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7745-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 329>; + status = "disabled"; }; cpg: clock-controller@e6150000 { @@ -312,6 +398,65 @@ dma-channels = <15>; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7745", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7745-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7745-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7745", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -615,7 +760,8 @@ }; ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7745"; + compatible = "renesas,ether-r8a7745", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; @@ -724,6 +870,40 @@ status = "disabled"; }; + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7745", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7745", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7745", "renesas,sh-mmcif"; @@ -756,6 +936,55 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7745", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7745", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7745"; + reg = <0 0xfeb00000 0 0x40000>; + reg-names = "du"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; + }; + }; + msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7745", "renesas,rcar-gen2-msiof"; @@ -804,8 +1033,89 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7745", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7745"; + compatible = "renesas,sdhi-r8a7745", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -819,7 +1129,8 @@ }; sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7745"; + compatible = "renesas,sdhi-r8a7745", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -833,7 +1144,8 @@ }; sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7745"; + compatible = "renesas,sdhi-r8a7745", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; @@ -916,6 +1228,23 @@ }; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7745", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + usbphy: usb-phy@e6590100 { compatible = "renesas,usb-phy-r8a7745", "renesas,rcar-gen2-usb-phy"; @@ -937,14 +1266,222 @@ #phy-cells = <1>; }; }; + + can0: can@e6e80000 { + compatible = "renesas,can-r8a7745", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7745_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7745", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7745_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7745", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>, + <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clka>, <&audio_clkb>, <&audio_clkc>, + <&cpg CPG_CORE R8A7745_CLK_M2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.6", "src.5", "src.4", "src.3", + "src.2", "src.1", + "ctu.0", "ctu.1", + "mix.0", "mix.1", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, + <&cpg 1009>, <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, <&cpg 1014>, + <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src-0 { + status = "disabled"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma0 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma0 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma0 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma0 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma0 0x02>, + <&audma0 0x15>, <&audma0 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma0 0x04>, + <&audma0 0x49>, <&audma0 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma0 0x06>, + <&audma0 0x63>, <&audma0 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma0 0x0c>, + <&audma0 0x73>, <&audma0 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma0 0x0e>, + <&audma0 0x75>, <&audma0 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma0 0x10>, + <&audma0 0x79>, <&audma0 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma0 0x12>, + <&audma0 0x7b>, <&audma0 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma0 0x14>, + <&audma0 0x7d>, <&audma0 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; }; - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; /* External USB clock - can be overridden by the board */ @@ -953,12 +1490,4 @@ #clock-cells = <0>; clock-frequency = <48000000>; }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index a39472aab867..3b49f9ed2e2b 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -51,7 +51,8 @@ }; ether: ethernet@fde00000 { - compatible = "renesas,ether-r8a7778"; + compatible = "renesas,ether-r8a7778", + "renesas,rcar-gen1-ether"; reg = <0xfde00000 0x400>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7778_CLK_ETHER>; @@ -379,7 +380,8 @@ }; sdhi0: sd@ffe4c000 { - compatible = "renesas,sdhi-r8a7778"; + compatible = "renesas,sdhi-r8a7778", + "renesas,rcar-gen1-sdhi"; reg = <0xffe4c000 0x100>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; @@ -388,7 +390,8 @@ }; sdhi1: sd@ffe4d000 { - compatible = "renesas,sdhi-r8a7778"; + compatible = "renesas,sdhi-r8a7778", + "renesas,rcar-gen1-sdhi"; reg = <0xffe4d000 0x100>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI1>; @@ -397,7 +400,8 @@ }; sdhi2: sd@ffe4f000 { - compatible = "renesas,sdhi-r8a7778"; + compatible = "renesas,sdhi-r8a7778", + "renesas,rcar-gen1-sdhi"; reg = <0xffe4f000 0x100>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI2>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index e8eb94748b27..e79ae306eedd 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -355,7 +355,8 @@ }; sdhi0: sd@ffe4c000 { - compatible = "renesas,sdhi-r8a7779"; + compatible = "renesas,sdhi-r8a7779", + "renesas,rcar-gen1-sdhi"; reg = <0xffe4c000 0x100>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; @@ -364,7 +365,8 @@ }; sdhi1: sd@ffe4d000 { - compatible = "renesas,sdhi-r8a7779"; + compatible = "renesas,sdhi-r8a7779", + "renesas,rcar-gen1-sdhi"; reg = <0xffe4d000 0x100>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; @@ -373,7 +375,8 @@ }; sdhi2: sd@ffe4e000 { - compatible = "renesas,sdhi-r8a7779"; + compatible = "renesas,sdhi-r8a7779", + "renesas,rcar-gen1-sdhi"; reg = <0xffe4e000 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; @@ -382,7 +385,8 @@ }; sdhi3: sd@ffe4f000 { - compatible = "renesas,sdhi-r8a7779"; + compatible = "renesas,sdhi-r8a7779", + "renesas,rcar-gen1-sdhi"; reg = <0xffe4f000 0x100>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index e3d27783b6b5..f2ea632381e7 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -272,9 +272,8 @@ #size-cells = <0>; compatible = "i2c-gpio"; status = "disabled"; - gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */ - &gpio1 16 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <5>; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 62baabd757b6..ed9a68538a55 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -168,7 +168,7 @@ trips { cpu-crit { - temperature = <115000>; + temperature = <95000>; hysteresis = <0>; type = "critical"; }; @@ -311,7 +311,7 @@ }; cmt0: timer@ffca0000 { - compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; + compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0"; reg = <0 0xffca0000 0 0x1004>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; @@ -320,13 +320,11 @@ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 124>; - renesas,channels-mask = <0x60>; - status = "disabled"; }; cmt1: timer@e6130000 { - compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; + compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1"; reg = <0 0xe6130000 0 0x1004>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, @@ -341,8 +339,6 @@ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 329>; - renesas,channels-mask = <0xff>; - status = "disabled"; }; @@ -662,7 +658,8 @@ }; sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7790"; + compatible = "renesas,sdhi-r8a7790", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -676,7 +673,8 @@ }; sdhi1: sd@ee120000 { - compatible = "renesas,sdhi-r8a7790"; + compatible = "renesas,sdhi-r8a7790", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee120000 0 0x328>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 313>; @@ -690,7 +688,8 @@ }; sdhi2: sd@ee140000 { - compatible = "renesas,sdhi-r8a7790"; + compatible = "renesas,sdhi-r8a7790", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -704,7 +703,8 @@ }; sdhi3: sd@ee160000 { - compatible = "renesas,sdhi-r8a7790"; + compatible = "renesas,sdhi-r8a7790", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; @@ -906,7 +906,8 @@ }; ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7790"; + compatible = "renesas,ether-r8a7790", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index e164eda69baf..a50924d12b6f 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -278,6 +278,12 @@ }; }; + cec_clock: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -306,9 +312,8 @@ #size-cells = <0>; compatible = "i2c-gpio"; status = "disabled"; - gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */ - &gpio7 15 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <5>; }; @@ -640,12 +645,6 @@ }; }; - cec_clock: cec-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; @@ -708,7 +707,7 @@ }; eeprom@50 { - compatible = "renesas,24c02", "atmel,24c02"; + compatible = "renesas,r1ex24002", "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 67831d0405f3..008a260f86a5 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -92,7 +92,7 @@ trips { cpu-crit { - temperature = <115000>; + temperature = <95000>; hysteresis = <0>; type = "critical"; }; @@ -257,7 +257,7 @@ }; cmt0: timer@ffca0000 { - compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; + compatible = "renesas,r8a7791-cmt0", "renesas,rcar-gen2-cmt0"; reg = <0 0xffca0000 0 0x1004>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; @@ -266,13 +266,11 @@ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 124>; - renesas,channels-mask = <0x60>; - status = "disabled"; }; cmt1: timer@e6130000 { - compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; + compatible = "renesas,r8a7791-cmt1", "renesas,rcar-gen2-cmt1"; reg = <0 0xe6130000 0 0x1004>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, @@ -287,8 +285,6 @@ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 329>; - renesas,channels-mask = <0xff>; - status = "disabled"; }; @@ -612,7 +608,8 @@ }; sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7791"; + compatible = "renesas,sdhi-r8a7791", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -626,7 +623,8 @@ }; sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7791"; + compatible = "renesas,sdhi-r8a7791", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -640,7 +638,8 @@ }; sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7791"; + compatible = "renesas,sdhi-r8a7791", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; @@ -961,7 +960,8 @@ }; ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7791"; + compatible = "renesas,ether-r8a7791", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 3d080e07374c..3be15a158bad 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -36,6 +36,14 @@ vin5 = &vin5; }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -69,6 +77,22 @@ }; }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -113,18 +137,6 @@ resets = <&cpg 407>; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>; - }; - rst: reset-controller@e6160000 { compatible = "renesas,r8a7792-rst"; reg = <0 0xe6160000 0 0x0100>; @@ -507,7 +519,8 @@ }; sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7792"; + compatible = "renesas,sdhi-r8a7792", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, @@ -833,27 +846,11 @@ }; }; - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 0cd1035de1a4..039b22517526 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -89,7 +89,7 @@ trips { cpu-crit { - temperature = <115000>; + temperature = <95000>; hysteresis = <0>; type = "critical"; }; @@ -248,7 +248,7 @@ }; cmt0: timer@ffca0000 { - compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; + compatible = "renesas,r8a7793-cmt0", "renesas,rcar-gen2-cmt0"; reg = <0 0xffca0000 0 0x1004>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; @@ -257,13 +257,11 @@ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; resets = <&cpg 124>; - renesas,channels-mask = <0x60>; - status = "disabled"; }; cmt1: timer@e6130000 { - compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; + compatible = "renesas,r8a7793-cmt1", "renesas,rcar-gen2-cmt1"; reg = <0 0xe6130000 0 0x1004>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, @@ -278,8 +276,6 @@ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; resets = <&cpg 329>; - renesas,channels-mask = <0xff>; - status = "disabled"; }; @@ -562,7 +558,8 @@ }; sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7793"; + compatible = "renesas,sdhi-r8a7793", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -576,7 +573,8 @@ }; sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7793"; + compatible = "renesas,sdhi-r8a7793", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -590,7 +588,8 @@ }; sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7793"; + compatible = "renesas,sdhi-r8a7793", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; @@ -916,7 +915,8 @@ }; ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7793"; + compatible = "renesas,ether-r8a7793", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index bd98790d964e..60c6515c4996 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -143,9 +143,8 @@ #size-cells = <0>; compatible = "i2c-gpio"; status = "disabled"; - gpios = <&gpio4 9 GPIO_ACTIVE_HIGH /* sda */ - &gpio4 8 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <5>; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 5643976c1356..106b4e1649ff 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -37,6 +37,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -66,6 +67,12 @@ }; }; + apmu@e6151000 { + compatible = "renesas,r8a7794-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -181,7 +188,7 @@ }; cmt0: timer@ffca0000 { - compatible = "renesas,cmt-48-gen2"; + compatible = "renesas,r8a7794-cmt0", "renesas,rcar-gen2-cmt0"; reg = <0 0xffca0000 0 0x1004>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; @@ -190,13 +197,11 @@ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; resets = <&cpg 124>; - renesas,channels-mask = <0x60>; - status = "disabled"; }; cmt1: timer@e6130000 { - compatible = "renesas,cmt-48-gen2"; + compatible = "renesas,r8a7794-cmt1", "renesas,rcar-gen2-cmt1"; reg = <0 0xe6130000 0 0x1004>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, @@ -211,8 +216,6 @@ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; resets = <&cpg 329>; - renesas,channels-mask = <0xff>; - status = "disabled"; }; @@ -640,7 +643,8 @@ }; ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7794"; + compatible = "renesas,ether-r8a7794", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; @@ -791,7 +795,8 @@ }; sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7794"; + compatible = "renesas,sdhi-r8a7794", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -805,7 +810,8 @@ }; sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7794"; + compatible = "renesas,sdhi-r8a7794", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -819,7 +825,8 @@ }; sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7794"; + compatible = "renesas,sdhi-r8a7794", + "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index cdf301f5778b..4d7057a10a4c 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -177,6 +177,7 @@ phy0: ethernet-phy@0 { reg = <0>; + reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi index 6274359fb323..92439ee5d7de 100644 --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung S3C2416 pinctrl settings * * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index f257926c13b7..a1c9d8c695cc 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG SMDK2416 board device tree source * * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 80f007550324..3c7385cab248 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S3C2416 SoC device tree source * * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/s3c2443.h> diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi index 5ed43b857cc4..34c7fe6751cf 100644 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S3C24XX family device tree source * * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "skeleton.dtsi" diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi index a7d1c8ec150d..8c28e8a0c824 100644 --- a/arch/arm/boot/dts/s3c6400.dtsi +++ b/arch/arm/boot/dts/s3c6400.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S3C6400 SoC device tree source * @@ -10,11 +11,7 @@ * Note: This file does not include device nodes for all the controllers in * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include "s3c64xx.dtsi" diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index f4afda3594f8..f68601bd9c91 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S3C6410 based Mini6410 board device tree source * @@ -5,11 +6,7 @@ * * Device tree source file for FriendlyARM Mini6410 board which is based on * Samsung's S3C6410 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index ecf35ec466f7..b6b5afcd7602 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung S3C6410 based SMDK6410 board device tree source. * @@ -5,11 +6,7 @@ * * Device tree source file for SAMSUNG SMDK6410 board which is based on * Samsung's S3C6410 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi index eb4226b3407c..a766d6de696c 100644 --- a/arch/arm/boot/dts/s3c6410.dtsi +++ b/arch/arm/boot/dts/s3c6410.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S3C6410 SoC device tree source * @@ -10,11 +11,7 @@ * Note: This file does not include device nodes for all the controllers in * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include "s3c64xx.dtsi" diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi index 4e8e802b4ee1..8e9594d64b57 100644 --- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi +++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S3C64xx SoC series common device tree source * - pin control-related definitions @@ -6,10 +7,6 @@ * * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are * listed as device tree nodes in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index c55cbb3af2c0..e2be3fbdd3f3 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S3C64xx SoC series common device tree source * @@ -10,10 +11,6 @@ * Note: This file does not include device nodes for all the controllers in * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "skeleton.dtsi" diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index 40139923eef0..14969b6529e8 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S5PV210 SoC device tree source * @@ -7,10 +8,6 @@ * Tomasz Figa <t.figa@samsung.com> * * Board device tree source for Samsung Aquila board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index c56f51ee7897..eb6d1926c0d6 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S5PV210 SoC device tree source * @@ -7,10 +8,6 @@ * Tomasz Figa <t.figa@samsung.com> * * Board device tree source for Samsung Goni board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi index 9a3e851e2e22..3a79feab11c3 100644 --- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S5PV210 SoC device tree source * @@ -13,10 +14,6 @@ * Note: This file does not include device nodes for all the controllers in * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts index 5d14da911aa5..e5aec6c526fb 100644 --- a/arch/arm/boot/dts/s5pv210-smdkc110.dts +++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S5PV210 SoC device tree source * @@ -11,10 +12,6 @@ * NOTE: This file is completely based on original board file for mach-smdkc110 * available in Linux 3.15 and intends to provide equivalent level of hardware * support. Due to lack of hardware, _no_ testing has been performed. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index 75398318ed57..84b38f185199 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S5PV210 SoC device tree source * @@ -11,10 +12,6 @@ * NOTE: This file is completely based on original board file for mach-smdkv210 * available in Linux 3.15 and intends to provide equivalent level of hardware * support. Due to lack of hardware, _no_ testing has been performed. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts index 7cb50bcee888..cd25e72ccd84 100644 --- a/arch/arm/boot/dts/s5pv210-torbreck.dts +++ b/arch/arm/boot/dts/s5pv210-torbreck.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S5PV210 SoC device tree source * @@ -11,10 +12,6 @@ * NOTE: This file is completely based on original board file for mach-torbreck * available in Linux 3.15 and intends to provide equivalent level of hardware * support. Due to lack of hardware, _no_ testing has been performed. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 726c5d0dbd5b..67358562a6ea 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's S5PV210 SoC device tree source * @@ -13,11 +14,7 @@ * Note: This file does not include device nodes for all the controllers in * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/clock/s5pv210.h> #include <dt-bindings/clock/s5pv210-audss.h> @@ -463,6 +460,7 @@ compatible = "samsung,exynos4210-ohci"; reg = <0xec300000 0x100>; interrupts = <23>; + interrupt-parent = <&vic1>; clocks = <&clocks CLK_USB_HOST>; clock-names = "usbhost"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index b44e63995583..61f68e5c48e9 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1094,7 +1094,9 @@ }; tcb0: timer@f800c000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb0_clk>, <&clk32k>; @@ -1102,7 +1104,9 @@ }; tcb1: timer@f8010000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf8010000 0x100>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb1_clk>, <&clk32k>; @@ -1427,6 +1431,8 @@ interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&adc_clk>; clock-names = "adc_clk"; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; + dma-names = "rx"; atmel,min-sample-rate-hz = <200000>; atmel,max-sample-rate-hz = <20000000>; atmel,startup-time-ms = <4>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 1889b4dea066..b9c05b57735e 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -142,7 +142,9 @@ }; tcb0: timer@f0010000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf0010000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb0_clk>, <&clk32k>; diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 801f9745e82f..cb30bdb1a9ca 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -28,7 +28,9 @@ }; tcb1: timer@f8014000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf8014000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb1_clk>, <&clk32k>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 9506daf5efb6..3311a882458b 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -34,6 +34,18 @@ spi0: spi@f0004000 { cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; }; + + tcb0: timer@f0010000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; }; ebi@10000000 { diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi index 75cbf4d4ab1a..a02f59021364 100644 --- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -69,6 +69,18 @@ cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; }; + tcb0: timer@f0010000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + macb0: ethernet@f0028000 { phy-mode = "rgmii"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 7f55050dd405..ef0f2d049e15 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -53,7 +53,7 @@ }; i2c1: i2c@f0018000 { - ov2640: camera@0x30 { + ov2640: camera@30 { compatible = "ovti,ov2640"; reg = <0x30>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi index 83e3d3e08fd4..97e171db5970 100644 --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -88,7 +88,7 @@ }; i2c1: i2c@f0018000 { - ov2640: camera@0x30 { + ov2640: camera@30 { compatible = "ovti,ov2640"; reg = <0x30>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index b069644ed238..373b3621b536 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -960,7 +960,9 @@ }; tcb0: timer@f801c000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xf801c000 0x100>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb0_clk>, <&clk32k>; @@ -1188,13 +1190,25 @@ }; tcb1: timer@fc020000 { - compatible = "atmel,at91sam9x5-tcb"; + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xfc020000 0x100>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&tcb1_clk>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; + tcb2: timer@fc024000 { + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfc024000 0x100>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb2_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + macb1: ethernet@fc028000 { compatible = "atmel,sama5d4-gem"; reg = <0xfc028000 0x100>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 88d7e5631d34..914a7c2a584f 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -100,9 +100,6 @@ clocks = <&mstp3_clks SH73A0_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; - - renesas,channels-mask = <0x3f>; - status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 7e24dc8e82d4..c42ca7022e8c 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -651,6 +651,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc04000 0x1000>; + resets = <&rst I2C0_RESET>; clocks = <&l4_sp_clk>; interrupts = <0 158 0x4>; status = "disabled"; @@ -661,6 +662,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc05000 0x1000>; + resets = <&rst I2C1_RESET>; clocks = <&l4_sp_clk>; interrupts = <0 159 0x4>; status = "disabled"; @@ -671,6 +673,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc06000 0x1000>; + resets = <&rst I2C2_RESET>; clocks = <&l4_sp_clk>; interrupts = <0 160 0x4>; status = "disabled"; @@ -681,6 +684,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc07000 0x1000>; + resets = <&rst I2C3_RESET>; clocks = <&l4_sp_clk>; interrupts = <0 161 0x4>; status = "disabled"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 3a32de9ded3b..64cc86a98771 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -163,6 +163,7 @@ &usb0 { status = "okay"; + disable-over-current; }; &watchdog1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 655fe87e272d..2459d133f1be 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -237,7 +237,7 @@ clock-frequency = <100000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <8>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 84101e4eebbf..0f5f379323a8 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -349,7 +349,7 @@ spi0: spi@e0100000 { status = "okay"; num-cs = <3>; - cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>; + cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>; stmpe610@0 { compatible = "st,stmpe610"; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 5f347054527d..d4dbc4098653 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -142,8 +142,8 @@ reg = <0xb4100000 0x1000>; interrupts = <0 105 0x4>; status = "disabled"; - dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */ - <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */ + dmas = <&dwdma0 12 0 1>, + <&dwdma0 13 1 0>; dma-names = "tx", "rx"; }; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 17ea0abcdbd7..086b4b333249 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -100,7 +100,7 @@ reg = <0xb2800000 0x1000>; interrupts = <0 29 0x4>; status = "disabled"; - dmas = <&dwdma0 0 0 0 0>; + dmas = <&dwdma0 0 0 0>; dma-names = "data"; }; @@ -290,8 +290,8 @@ #size-cells = <0>; interrupts = <0 31 0x4>; status = "disabled"; - dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */ - <&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */ + dmas = <&dwdma0 4 0 0>, + <&dwdma0 5 0 0>; dma-names = "tx", "rx"; }; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 6b32d20acc9f..00166eb9be86 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -194,6 +194,7 @@ rtc: rtc@fc900000 { compatible = "st,spear600-rtc"; reg = <0xfc900000 0x1000>; + interrupt-parent = <&vic0>; interrupts = <10>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 68aab50a73ab..733678b75b88 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -750,6 +750,7 @@ reg = <0x10120000 0x1000>; interrupt-names = "combined"; interrupts = <14>; + interrupt-parent = <&vica>; clocks = <&clcdclk>, <&hclkclcd>; clock-names = "clcdclk", "apb_pclk"; status = "disabled"; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index fa149837df14..11fdecd9312e 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -8,6 +8,7 @@ */ #include "stih407-clock.dtsi" #include "stih407-family.dtsi" +#include <dt-bindings/gpio/gpio.h> / { soc { sti-display-subsystem { @@ -122,7 +123,7 @@ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; - hdmi,hpd-gpio = <&pio5 3>; + hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>; reset-names = "hdmi"; resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; ddc = <&hdmiddc>; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index cffa50db5d72..68b5ff91d6a7 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -9,6 +9,7 @@ #include "stih410-clock.dtsi" #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> / { aliases { bdisp0 = &bdisp0; @@ -213,7 +214,7 @@ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; - hdmi,hpd-gpio = <&pio5 3>; + hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>; reset-names = "hdmi"; resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; ddc = <&hdmiddc>; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 38072c7e10e2..4b9af423c6d5 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -114,6 +114,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 39bc73db72e5..fb591f32252c 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -90,6 +101,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -110,6 +125,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index c606af3dbfed..6550bf0e594b 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -52,6 +52,7 @@ compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -88,6 +89,24 @@ /* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */ }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_sw>; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + allwinner,rx-delay-ps = <700>; + allwinner,tx-delay-ps = <700>; + status = "okay"; +}; + +&mdio { + rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 7f0a3f6d0cf2..6da08cd0e107 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -52,6 +52,7 @@ compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -154,6 +155,22 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_dldo4>; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&mdio { + rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index a021ee6da396..511fca491fe8 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -45,6 +45,7 @@ #include "sun8i-a83t.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "TBS A711 Tablet"; @@ -59,6 +60,44 @@ stdout-path = "serial0:115200n8"; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>; + + brightness-levels = <0 1 2 4 8 16 32 64 128 255>; + default-brightness-level = <9>; + }; + + panel { + compatible = "tbs,a711-panel", "panel-lvds"; + backlight = <&backlight>; + power-supply = <®_sw>; + + width-mm = <153>; + height-mm = <90>; + data-mapping = "vesa-24"; + + panel-timing { + /* 1024x600 @60Hz */ + clock-frequency = <52000000>; + hactive = <1024>; + vactive = <600>; + hsync-len = <20>; + hfront-porch = <180>; + hback-porch = <160>; + vfront-porch = <12>; + vback-porch = <23>; + vsync-len = <5>; + }; + + port { + panel_input: endpoint { + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; + reg_vbat: reg-vbat { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -89,6 +128,10 @@ }; }; +&de { + status = "okay"; +}; + /* * An USB-2 hub is connected here, which also means we don't need to * enable the OHCI controller. @@ -142,6 +185,12 @@ status = "okay"; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pin>; + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -323,6 +372,18 @@ regulator-name = "vcc-lcd"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_lvds_pins>; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 19acae1b4089..7f4955a5fab7 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -45,8 +45,10 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-a83t-ccu.h> +#include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r-ccu.h> #include <dt-bindings/reset/sun8i-a83t-ccu.h> +#include <dt-bindings/reset/sun8i-de2.h> #include <dt-bindings/reset/sun8i-r-ccu.h> / { @@ -151,6 +153,12 @@ }; }; + de: display-engine { + compatible = "allwinner,sun8i-a83t-display-engine"; + allwinner,pipelines = <&mixer0>; + status = "disabled"; + }; + memory { reg = <0x40000000 0x80000000>; device_type = "memory"; @@ -162,6 +170,44 @@ #size-cells = <1>; ranges; + display_clocks: clock@1000000 { + compatible = "allwinner,sun8i-a83t-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_PLL_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-a83t-de2-mixer-0"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mixer0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + syscon: syscon@1c00000 { compatible = "allwinner,sun8i-a83t-system-controller", "syscon"; @@ -177,6 +223,39 @@ #dma-cells = <1>; }; + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-a83t-tcon-lcd"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "ahb", "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-a83t-mmc", "allwinner,sun7i-a20-mmc"; @@ -336,6 +415,45 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + emac_rgmii_pins: emac-rgmii-pins { + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD11", "PD12", "PD13", "PD14", "PD18", + "PD19", "PD21", "PD22", "PD23"; + function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; + }; + + i2c0_pins: i2c0-pins { + pins = "PH0", "PH1"; + function = "i2c0"; + }; + + i2c1_pins: i2c1-pins { + pins = "PH2", "PH3"; + function = "i2c1"; + }; + + i2c2_ph_pins: i2c2-ph-pins { + pins = "PH4", "PH5"; + function = "i2c2"; + }; + + i2s1_pins: i2s1-pins { + /* I2S1 does not have external MCLK pin */ + pins = "PG10", "PG11", "PG12", "PG13"; + function = "i2s1"; + }; + + lcd_lvds_pins: lcd-lvds-pins { + pins = "PD18", "PD19", "PD20", "PD21", "PD22", + "PD23", "PD24", "PD25", "PD26", "PD27"; + function = "lvds0"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -361,6 +479,11 @@ bias-pull-up; }; + pwm_pin: pwm-pin { + pins = "PD28"; + function = "pwm"; + }; + spdif_tx_pin: spdif-tx-pin { pins = "PE18"; function = "spdif"; @@ -418,6 +541,56 @@ status = "disabled"; }; + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a83t-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + resets = <&ccu RST_BUS_I2S0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a83t-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + resets = <&ccu RST_BUS_I2S1>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_pins>; + status = "disabled"; + }; + + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a83t-i2s"; + reg = <0x01c22800 0x400>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + dmas = <&dma 27>; + resets = <&ccu RST_BUS_I2S2>; + dma-names = "tx"; + status = "disabled"; + }; + + pwm: pwm@1c21400 { + compatible = "allwinner,sun8i-a83t-pwm", + "allwinner,sun8i-h3-pwm"; + reg = <0x01c21400 0x400>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -440,6 +613,67 @@ status = "disabled"; }; + i2c0: i2c@1c2ac00 { + compatible = "allwinner,sun8i-a83t-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@1c2b000 { + compatible = "allwinner,sun8i-a83t-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@1c2b400 { + compatible = "allwinner,sun8i-a83t-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu 13>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts new file mode 100644 index 000000000000..112f09c67d67 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* Orange Pi R1 is based on Orange Pi Zero design */ +#include "sun8i-h2-plus-orangepi-zero.dts" + +/ { + model = "Xunlong Orange Pi R1"; + compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; + + /delete-node/ reg_vcc_wifi; + + /* + * Ths pin of this regulator is the same with the Wi-Fi extra + * regulator on the original Zero. However it's used for USB + * Ethernet rather than the Wi-Fi now. + */ + reg_vcc_usb_eth: reg-vcc-usb-ethernet { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-ethernet"; + enable-active-high; + gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; + }; + + aliases { + ethernet1 = &rtl8189etv; + }; +}; + +&ohci1 { + /* + * RTL8152B USB-Ethernet adapter is connected to USB1, + * and it's a USB 2.0 device. So the OHCI1 controller + * can be left disabled. + */ + status = "disabled"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + + rtl8189etv: sdio_wifi@1 { + reg = <1>; + }; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc_usb_eth>; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index f2292deaa590..f1c3f1cc4d97 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -119,7 +119,6 @@ phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; - allwinner,leds-active-low; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts new file mode 100644 index 000000000000..d406571a0dd6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -0,0 +1,196 @@ +/* + * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Libre Computer Board ALL-H3-CC H3"; + compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "librecomputer:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status_led { + label = "librecomputer:blue:status"; + gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v0>; + }; + + /* This represents the board's 5V input */ + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + enable-active-high; + }; + + reg_vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc-io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc3v3>; + gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ + }; + + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc_io>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + /* VBUS on USB ports are always on */ + usb0_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + usb3_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts index 0a8b79cf5954..a6e61915d648 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -48,6 +48,7 @@ aliases { serial1 = &uart3; + ethernet0 = &emac; ethernet1 = &sdio_wifi; }; @@ -83,8 +84,6 @@ phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; - allwinner,leds-active-low; - status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts index 3a2ccdb28afd..c77fbca4f227 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts @@ -45,6 +45,10 @@ / { model = "FriendlyArm NanoPi M1"; compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + }; }; &ehci1 { @@ -55,6 +59,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts index 78f6c24952dd..9f33f6fae595 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -47,9 +47,26 @@ compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; }; +&ehci0 { + status = "okay"; +}; + &emac { phy-handle = <&int_mii_phy>; phy-mode = "mii"; allwinner,leds-active-low; status = "okay"; }; + +&ohci0 { + status = "okay"; +}; + +&usb_otg { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index cbc499b04de4..b403e5d787cb 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -85,7 +85,6 @@ phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; - allwinner,leds-active-low; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index b36f9f423c39..8495deecedad 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -85,6 +85,10 @@ compatible = "allwinner,sun8i-h3-ccu"; }; +&display_clocks { + compatible = "allwinner,sun8i-h3-de2-clk"; +}; + &mmc0 { compatible = "allwinner,sun7i-a20-mmc"; clocks = <&ccu CLK_BUS_MMC0>, diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 8d40c00d64bb..7a83b15225c7 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -40,9 +40,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-h3-ccu.h> #include <dt-bindings/clock/sun8i-r-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/sun8i-de2.h> #include <dt-bindings/reset/sun8i-h3-ccu.h> #include <dt-bindings/reset/sun8i-r-ccu.h> @@ -51,6 +53,30 @@ #address-cells = <1>; #size-cells = <1>; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer-hdmi { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "mixer0-lcd0-hdmi"; + clocks = <&display_clocks CLK_MIXER0>, + <&ccu CLK_TCON0>, <&ccu CLK_HDMI>; + status = "disabled"; + }; + + framebuffer-tve { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "mixer1-lcd1-tve"; + clocks = <&display_clocks CLK_MIXER1>, + <&ccu CLK_TVE>; + status = "disabled"; + }; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -85,6 +111,18 @@ #size-cells = <1>; ranges; + display_clocks: clock@1000000 { + /* compatible is in per SoC .dtsi file */ + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + syscon: syscon@1c00000 { compatible = "allwinner,sun8i-h3-system-controller", "syscon"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 914f59166a99..864a95872b8d 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -10,6 +10,19 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&lic>; + iram@40000000 { + compatible = "mmio-sram"; + reg = <0x40000000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000000 0x40000>; + + vde_pool: vde { + reg = <0x400 0x3fc00>; + pool; + }; + }; + host1x@50000000 { compatible = "nvidia,tegra20-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; @@ -250,6 +263,28 @@ */ }; + vde@6001a000 { + compatible = "nvidia,tegra20-vde"; + reg = <0x6001a000 0x1000 /* Syntax Engine */ + 0x6001b000 0x1000 /* Video Bitstream Engine */ + 0x6001c000 0x100 /* Macroblock Engine */ + 0x6001c200 0x100 /* Post-processing Engine */ + 0x6001c400 0x100 /* Motion Compensation Engine */ + 0x6001c600 0x100 /* Transform Engine */ + 0x6001c800 0x100 /* Pixel prediction block */ + 0x6001ca00 0x100 /* Video DMA */ + 0x6001d800 0x300>; /* Video frame controls */ + reg-names = "sxe", "bsev", "mbe", "ppe", "mce", + "tfe", "ppb", "vdma", "frameid"; + iram = <&vde_pool>; /* IRAM region */ + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */ + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */ + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ + interrupt-names = "sync-token", "bsev", "sxe"; + clocks = <&tegra_car TEGRA20_CLK_VDE>; + resets = <&tegra_car 61>; + }; + apbmisc@70000800 { compatible = "nvidia,tegra20-apbmisc"; reg = <0x70000800 0x64 /* Chip revision */ diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi index 5d83df4675a1..8e3cf5109f98 100644 --- a/arch/arm/boot/dts/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -27,6 +27,18 @@ ahb { apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + dbgu: serial@fffff200 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 8cf0a9e08571..7b403db4cd34 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -36,6 +36,18 @@ status = "okay"; }; + tcb0: timer@fff7c000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usb1: gadget@fff78000 { atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index 0056852c4fb0..a3afd0cda42f 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -56,7 +56,7 @@ &gpio { xirq1 { gpio-hog; - gpios = <121 0>; + gpios = <UNIPHIER_GPIO_IRQ(1) 0>; input; }; }; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 01fc3e16e2bd..0459e84d4d8e 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -7,6 +7,8 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/gpio/uniphier-gpio.h> + / { compatible = "socionext,uniphier-ld4"; #address-cells = <1>; @@ -235,6 +237,7 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + has-transaction-translator; }; usb1: usb@5a810100 { @@ -248,6 +251,7 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + has-transaction-translator; }; usb2: usb@5a820100 { @@ -261,6 +265,7 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + has-transaction-translator; }; soc-glue@5f800000 { @@ -273,6 +278,24 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-ld4-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@130 { + compatible = "socionext,uniphier-efuse"; + reg = <0x130 0x8>; + }; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 0e510a725976..811b999800ed 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -58,7 +58,7 @@ &gpio { xirq4 { gpio-hog; - gpios = <124 0>; + gpios = <UNIPHIER_GPIO_IRQ(4) 0>; input; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index be99467ac6bb..6a004e5cf786 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -58,7 +58,7 @@ &gpio { xirq2 { gpio-hog; - gpios = <122 0>; + gpios = <UNIPHIER_GPIO_IRQ(2) 0>; input; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 7955c3a49e65..1a29a8619856 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -7,6 +7,8 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/gpio/uniphier-gpio.h> + / { compatible = "socionext,uniphier-pro4"; #address-cells = <1>; @@ -269,6 +271,7 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + has-transaction-translator; }; usb3: usb@5a810100 { @@ -282,6 +285,7 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + has-transaction-translator; }; soc-glue@5f800000 { @@ -294,6 +298,29 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-pro4-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@130 { + compatible = "socionext,uniphier-efuse"; + reg = <0x130 0x8>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x14>; + }; + }; + aidet: aidet@5fc20000 { compatible = "socionext,uniphier-pro4-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 6589b8a2c65c..f291dd63de9c 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -355,6 +355,39 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-pro5-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@130 { + compatible = "socionext,uniphier-efuse"; + reg = <0x130 0x8>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x28>; + }; + + efuse@300 { + compatible = "socionext,uniphier-efuse"; + reg = <0x300 0x14>; + }; + + efuse@400 { + compatible = "socionext,uniphier-efuse"; + reg = <0x400 0x8>; + }; + }; + aidet: aidet@5fc20000 { compatible = "socionext,uniphier-pro5-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index d82d6d872131..c083468c17db 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -7,6 +7,7 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/gpio/uniphier-gpio.h> #include <dt-bindings/thermal/thermal.h> / { @@ -375,6 +376,24 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-pxs2-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x58>; + }; + }; + aidet: aidet@5fc20000 { compatible = "socionext,uniphier-pxs2-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 1c0e7077a560..e052ea3b4020 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -56,7 +56,7 @@ &gpio { xirq0 { gpio-hog; - gpios = <120 0>; + gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; }; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 71885366cd23..bc8c24078faa 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -7,6 +7,8 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/gpio/uniphier-gpio.h> + / { compatible = "socionext,uniphier-sld8"; #address-cells = <1>; @@ -239,6 +241,7 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + has-transaction-translator; }; usb1: usb@5a810100 { @@ -252,6 +255,7 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + has-transaction-translator; }; usb2: usb@5a820100 { @@ -265,6 +269,7 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + has-transaction-translator; }; soc-glue@5f800000 { @@ -277,6 +282,24 @@ }; }; + soc-glue@5f900000 { + compatible = "socionext,uniphier-sld8-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x14>; + }; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index 34a49995eda3..de3fa3ab34d6 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -23,6 +23,18 @@ status = "okay"; }; + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + macb0: ethernet@fffc4000 { phy-mode = "rmii"; status = "okay"; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 7b1125be99c4..0a753b4c74e7 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -36,6 +36,18 @@ status = "okay"; }; + tcb0: timer@fff7c000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + macb0: ethernet@fffbc000 { phy-mode = "rmii"; status = "okay"; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 091b738041a0..d8b2972527eb 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -140,7 +140,7 @@ /* M41T0M6 real time clock on carrier board */ rtc: m41t0m6@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index 3d9896171bfc..348bcd30c0f7 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -58,7 +58,7 @@ soc { aips-bus@40000000 { - intc: interrupt-controller@40002000 { + intc: interrupt-controller@40003000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index acdf12ad0622..782b69a3acdf 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -255,16 +255,19 @@ port@0 { reg = <0>; label = "lan6"; + phy-handle = <&switch2phy0>; }; port@1 { reg = <1>; label = "lan7"; + phy-handle = <&switch2phy1>; }; port@2 { reg = <2>; label = "lan8"; + phy-handle = <&switch2phy2>; }; port@3 { @@ -304,6 +307,20 @@ }; }; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy0: phy@0 { + reg = <0>; + }; + switch2phy1: phy@1 { + reg = <1>; + }; + switch2phy2: phy@2 { + reg = <2>; + }; + }; }; }; @@ -371,7 +388,8 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&gpio2>; + interrupt-controller; + interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 4b8edc8982cf..c6f134c78303 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -73,7 +73,7 @@ #size-cells = <0>; reg = <0>; dsa,member = <0 0>; - eeprom-length = <512>; + eeprom-length = <65536>; interrupt-parent = <&gpio0>; interrupts = <27 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -170,7 +170,7 @@ #size-cells = <0>; reg = <0>; dsa,member = <0 1>; - eeprom-length = <512>; + eeprom-length = <65536>; interrupt-parent = <&gpio0>; interrupts = <26 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 6b58d3a97992..aadd36db0092 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -96,6 +96,10 @@ status = "okay"; }; +&edma1 { + status = "okay"; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 5d654b5b4ce6..c3f09b737924 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -84,6 +84,11 @@ mask = <0x1000>; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 16>, <&adc1 16>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -762,10 +767,5 @@ status = "disabled"; }; }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc0 16>, <&adc1 16>; - }; }; }; diff --git a/arch/arm/common/bL_switcher_dummy_if.c b/arch/arm/common/bL_switcher_dummy_if.c index 4c10c6452678..f4dc1714a79e 100644 --- a/arch/arm/common/bL_switcher_dummy_if.c +++ b/arch/arm/common/bL_switcher_dummy_if.c @@ -57,3 +57,7 @@ static struct miscdevice bL_switcher_device = { &bL_switcher_fops }; module_misc_device(bL_switcher_device); + +MODULE_AUTHOR("Nicolas Pitre <nico@linaro.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("big.LITTLE switcher dummy user interface"); diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 4ecd5120fce7..a2c878769eaf 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -108,6 +108,7 @@ struct sa1111 { spinlock_t lock; void __iomem *base; struct sa1111_platform_data *pdata; + struct irq_domain *irqdomain; struct gpio_chip gc; #ifdef CONFIG_PM void *saved_state; @@ -125,7 +126,7 @@ struct sa1111_dev_info { unsigned long skpcr_mask; bool dma; unsigned int devid; - unsigned int irq[6]; + unsigned int hwirq[6]; }; static struct sa1111_dev_info sa1111_devices[] = { @@ -134,7 +135,7 @@ static struct sa1111_dev_info sa1111_devices[] = { .skpcr_mask = SKPCR_UCLKEN, .dma = true, .devid = SA1111_DEVID_USB, - .irq = { + .hwirq = { IRQ_USBPWR, IRQ_HCIM, IRQ_HCIBUFFACC, @@ -148,7 +149,7 @@ static struct sa1111_dev_info sa1111_devices[] = { .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN, .dma = true, .devid = SA1111_DEVID_SAC, - .irq = { + .hwirq = { AUDXMTDMADONEA, AUDXMTDMADONEB, AUDRCVDMADONEA, @@ -164,7 +165,7 @@ static struct sa1111_dev_info sa1111_devices[] = { .offset = SA1111_KBD, .skpcr_mask = SKPCR_PTCLKEN, .devid = SA1111_DEVID_PS2_KBD, - .irq = { + .hwirq = { IRQ_TPRXINT, IRQ_TPTXINT }, @@ -173,7 +174,7 @@ static struct sa1111_dev_info sa1111_devices[] = { .offset = SA1111_MSE, .skpcr_mask = SKPCR_PMCLKEN, .devid = SA1111_DEVID_PS2_MSE, - .irq = { + .hwirq = { IRQ_MSRXINT, IRQ_MSTXINT }, @@ -182,7 +183,7 @@ static struct sa1111_dev_info sa1111_devices[] = { .offset = 0x1800, .skpcr_mask = 0, .devid = SA1111_DEVID_PCMCIA, - .irq = { + .hwirq = { IRQ_S0_READY_NINT, IRQ_S0_CD_VALID, IRQ_S0_BVD1_STSCHG, @@ -193,6 +194,19 @@ static struct sa1111_dev_info sa1111_devices[] = { }, }; +static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq) +{ + return irq_create_mapping(sachip->irqdomain, hwirq); +} + +static void sa1111_handle_irqdomain(struct irq_domain *irqdomain, int irq) +{ + struct irq_desc *d = irq_to_desc(irq_linear_revmap(irqdomain, irq)); + + if (d) + generic_handle_irq_desc(d); +} + /* * SA1111 interrupt support. Since clearing an IRQ while there are * active IRQs causes the interrupt output to pulse, the upper levels @@ -202,49 +216,45 @@ static void sa1111_irq_handler(struct irq_desc *desc) { unsigned int stat0, stat1, i; struct sa1111 *sachip = irq_desc_get_handler_data(desc); + struct irq_domain *irqdomain; void __iomem *mapbase = sachip->base + SA1111_INTC; - stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0); - stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1); + stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0); + stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1); - sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0); + writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0); desc->irq_data.chip->irq_ack(&desc->irq_data); - sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1); + writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1); if (stat0 == 0 && stat1 == 0) { do_bad_IRQ(desc); return; } + irqdomain = sachip->irqdomain; + for (i = 0; stat0; i++, stat0 >>= 1) if (stat0 & 1) - generic_handle_irq(i + sachip->irq_base); + sa1111_handle_irqdomain(irqdomain, i); for (i = 32; stat1; i++, stat1 >>= 1) if (stat1 & 1) - generic_handle_irq(i + sachip->irq_base); + sa1111_handle_irqdomain(irqdomain, i); /* For level-based interrupts */ desc->irq_data.chip->irq_unmask(&desc->irq_data); } -#define SA1111_IRQMASK_LO(x) (1 << (x - sachip->irq_base)) -#define SA1111_IRQMASK_HI(x) (1 << (x - sachip->irq_base - 32)) - static u32 sa1111_irqmask(struct irq_data *d) { - struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - - return BIT((d->irq - sachip->irq_base) & 31); + return BIT(irqd_to_hwirq(d) & 31); } static int sa1111_irqbank(struct irq_data *d) { - struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - - return ((d->irq - sachip->irq_base) / 32) * 4; + return (irqd_to_hwirq(d) / 32) * 4; } static void sa1111_ack_irq(struct irq_data *d) @@ -257,9 +267,9 @@ static void sa1111_mask_irq(struct irq_data *d) void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); u32 ie; - ie = sa1111_readl(mapbase + SA1111_INTEN0); + ie = readl_relaxed(mapbase + SA1111_INTEN0); ie &= ~sa1111_irqmask(d); - sa1111_writel(ie, mapbase + SA1111_INTEN0); + writel(ie, mapbase + SA1111_INTEN0); } static void sa1111_unmask_irq(struct irq_data *d) @@ -268,9 +278,9 @@ static void sa1111_unmask_irq(struct irq_data *d) void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); u32 ie; - ie = sa1111_readl(mapbase + SA1111_INTEN0); + ie = readl_relaxed(mapbase + SA1111_INTEN0); ie |= sa1111_irqmask(d); - sa1111_writel(ie, mapbase + SA1111_INTEN0); + writel_relaxed(ie, mapbase + SA1111_INTEN0); } /* @@ -287,11 +297,11 @@ static int sa1111_retrigger_irq(struct irq_data *d) u32 ip, mask = sa1111_irqmask(d); int i; - ip = sa1111_readl(mapbase + SA1111_INTPOL0); + ip = readl_relaxed(mapbase + SA1111_INTPOL0); for (i = 0; i < 8; i++) { - sa1111_writel(ip ^ mask, mapbase + SA1111_INTPOL0); - sa1111_writel(ip, mapbase + SA1111_INTPOL0); - if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask) + writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0); + writel_relaxed(ip, mapbase + SA1111_INTPOL0); + if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask) break; } @@ -313,13 +323,13 @@ static int sa1111_type_irq(struct irq_data *d, unsigned int flags) if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; - ip = sa1111_readl(mapbase + SA1111_INTPOL0); + ip = readl_relaxed(mapbase + SA1111_INTPOL0); if (flags & IRQ_TYPE_EDGE_RISING) ip &= ~mask; else ip |= mask; - sa1111_writel(ip, mapbase + SA1111_INTPOL0); - sa1111_writel(ip, mapbase + SA1111_WAKEPOL0); + writel_relaxed(ip, mapbase + SA1111_INTPOL0); + writel_relaxed(ip, mapbase + SA1111_WAKEPOL0); return 0; } @@ -330,12 +340,12 @@ static int sa1111_wake_irq(struct irq_data *d, unsigned int on) void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); u32 we, mask = sa1111_irqmask(d); - we = sa1111_readl(mapbase + SA1111_WAKEEN0); + we = readl_relaxed(mapbase + SA1111_WAKEEN0); if (on) we |= mask; else we &= ~mask; - sa1111_writel(we, mapbase + SA1111_WAKEEN0); + writel_relaxed(we, mapbase + SA1111_WAKEEN0); return 0; } @@ -350,10 +360,30 @@ static struct irq_chip sa1111_irq_chip = { .irq_set_wake = sa1111_wake_irq, }; +static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct sa1111 *sachip = d->host_data; + + /* Disallow unavailable interrupts */ + if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA) + return -EINVAL; + + irq_set_chip_data(irq, sachip); + irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); + + return 0; +} + +static const struct irq_domain_ops sa1111_irqdomain_ops = { + .map = sa1111_irqdomain_map, + .xlate = irq_domain_xlate_twocell, +}; + static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) { void __iomem *irqbase = sachip->base + SA1111_INTC; - unsigned i, irq; int ret; /* @@ -373,38 +403,40 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) sachip->irq_base = ret; /* disable all IRQs */ - sa1111_writel(0, irqbase + SA1111_INTEN0); - sa1111_writel(0, irqbase + SA1111_INTEN1); - sa1111_writel(0, irqbase + SA1111_WAKEEN0); - sa1111_writel(0, irqbase + SA1111_WAKEEN1); + writel_relaxed(0, irqbase + SA1111_INTEN0); + writel_relaxed(0, irqbase + SA1111_INTEN1); + writel_relaxed(0, irqbase + SA1111_WAKEEN0); + writel_relaxed(0, irqbase + SA1111_WAKEEN1); /* * detect on rising edge. Note: Feb 2001 Errata for SA1111 * specifies that S0ReadyInt and S1ReadyInt should be '1'. */ - sa1111_writel(0, irqbase + SA1111_INTPOL0); - sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) | - BIT(IRQ_S1_READY_NINT & 31), - irqbase + SA1111_INTPOL1); + writel_relaxed(0, irqbase + SA1111_INTPOL0); + writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) | + BIT(IRQ_S1_READY_NINT & 31), + irqbase + SA1111_INTPOL1); /* clear all IRQs */ - sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0); - sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1); - - for (i = IRQ_GPAIN0; i <= SSPROR; i++) { - irq = sachip->irq_base + i; - irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq); - irq_set_chip_data(irq, sachip); - irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); - } + writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0); + writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1); - for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) { - irq = sachip->irq_base + i; - irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq); - irq_set_chip_data(irq, sachip); - irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); + sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR, + &sa1111_irqdomain_ops, + sachip); + if (!sachip->irqdomain) { + irq_free_descs(sachip->irq_base, SA1111_IRQ_NR); + return -ENOMEM; } + irq_domain_associate_many(sachip->irqdomain, + sachip->irq_base + IRQ_GPAIN0, + IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0); + irq_domain_associate_many(sachip->irqdomain, + sachip->irq_base + AUDXMTDMADONEA, + AUDXMTDMADONEA, + IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA); + /* * Register SA1111 interrupt */ @@ -420,20 +452,22 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) static void sa1111_remove_irq(struct sa1111 *sachip) { + struct irq_domain *domain = sachip->irqdomain; void __iomem *irqbase = sachip->base + SA1111_INTC; + int i; /* disable all IRQs */ - sa1111_writel(0, irqbase + SA1111_INTEN0); - sa1111_writel(0, irqbase + SA1111_INTEN1); - sa1111_writel(0, irqbase + SA1111_WAKEEN0); - sa1111_writel(0, irqbase + SA1111_WAKEEN1); + writel_relaxed(0, irqbase + SA1111_INTEN0); + writel_relaxed(0, irqbase + SA1111_INTEN1); + writel_relaxed(0, irqbase + SA1111_WAKEEN0); + writel_relaxed(0, irqbase + SA1111_WAKEEN1); - if (sachip->irq != NO_IRQ) { - irq_set_chained_handler_and_data(sachip->irq, NULL, NULL); - irq_free_descs(sachip->irq_base, SA1111_IRQ_NR); + irq_set_chained_handler_and_data(sachip->irq, NULL, NULL); + for (i = 0; i < SA1111_IRQ_NR; i++) + irq_dispose_mapping(irq_find_mapping(domain, i)); + irq_domain_remove(domain); - release_mem_region(sachip->phys + SA1111_INTC, 512); - } + release_mem_region(sachip->phys + SA1111_INTC, 512); } enum { @@ -572,7 +606,7 @@ static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset) { struct sa1111 *sachip = gc_to_sa1111(gc); - return sachip->irq_base + offset; + return sa1111_map_irq(sachip, offset); } static int sa1111_setup_gpios(struct sa1111 *sachip) @@ -618,11 +652,11 @@ static void sa1111_wake(struct sa1111 *sachip) /* * Turn VCO on, and disable PLL Bypass. */ - r = sa1111_readl(sachip->base + SA1111_SKCR); + r = readl_relaxed(sachip->base + SA1111_SKCR); r &= ~SKCR_VCO_OFF; - sa1111_writel(r, sachip->base + SA1111_SKCR); + writel_relaxed(r, sachip->base + SA1111_SKCR); r |= SKCR_PLL_BYPASS | SKCR_OE_EN; - sa1111_writel(r, sachip->base + SA1111_SKCR); + writel_relaxed(r, sachip->base + SA1111_SKCR); /* * Wait lock time. SA1111 manual _doesn't_ @@ -634,7 +668,7 @@ static void sa1111_wake(struct sa1111 *sachip) * Enable RCLK. We also ensure that RDYEN is set. */ r |= SKCR_RCLKEN | SKCR_RDYEN; - sa1111_writel(r, sachip->base + SA1111_SKCR); + writel_relaxed(r, sachip->base + SA1111_SKCR); /* * Wait 14 RCLK cycles for the chip to finish coming out @@ -645,7 +679,7 @@ static void sa1111_wake(struct sa1111 *sachip) /* * Ensure all clocks are initially off. */ - sa1111_writel(0, sachip->base + SA1111_SKPCR); + writel_relaxed(0, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); } @@ -675,7 +709,7 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, if (cas_latency == 3) smcr |= SMCR_CLAT; - sa1111_writel(smcr, sachip->base + SA1111_SMCR); + writel_relaxed(smcr, sachip->base + SA1111_SMCR); /* * Now clear the bits in the DMA mask to work around the SA1111 @@ -723,8 +757,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, dev->mapbase = sachip->base + info->offset; dev->skpcr_mask = info->skpcr_mask; - for (i = 0; i < ARRAY_SIZE(info->irq); i++) - dev->irq[i] = sachip->irq_base + info->irq[i]; + for (i = 0; i < ARRAY_SIZE(info->hwirq); i++) + dev->hwirq[i] = info->hwirq[i]; /* * If the parent device has a DMA mask associated with it, and @@ -814,7 +848,7 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) /* * Probe for the chip. Only touch the SBI registers. */ - id = sa1111_readl(sachip->base + SA1111_SKID); + id = readl_relaxed(sachip->base + SA1111_SKID); if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id); ret = -ENODEV; @@ -833,11 +867,9 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) * The interrupt controller must be initialised before any * other device to ensure that the interrupts are available. */ - if (sachip->irq != NO_IRQ) { - ret = sa1111_setup_irq(sachip, pd->irq_base); - if (ret) - goto err_clk; - } + ret = sa1111_setup_irq(sachip, pd->irq_base); + if (ret) + goto err_clk; /* Setup the GPIOs - should really be done after the IRQ setup */ ret = sa1111_setup_gpios(sachip); @@ -864,8 +896,8 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) * DMA. It can otherwise be held firmly in the off position. * (currently, we always enable it.) */ - val = sa1111_readl(sachip->base + SA1111_SKPCR); - sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR); + val = readl_relaxed(sachip->base + SA1111_SKPCR); + writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR); /* * Enable the SA1110 memory bus request and grant signals. @@ -962,31 +994,31 @@ static int sa1111_suspend_noirq(struct device *dev) * Save state. */ base = sachip->base; - save->skcr = sa1111_readl(base + SA1111_SKCR); - save->skpcr = sa1111_readl(base + SA1111_SKPCR); - save->skcdr = sa1111_readl(base + SA1111_SKCDR); - save->skaud = sa1111_readl(base + SA1111_SKAUD); - save->skpwm0 = sa1111_readl(base + SA1111_SKPWM0); - save->skpwm1 = sa1111_readl(base + SA1111_SKPWM1); + save->skcr = readl_relaxed(base + SA1111_SKCR); + save->skpcr = readl_relaxed(base + SA1111_SKPCR); + save->skcdr = readl_relaxed(base + SA1111_SKCDR); + save->skaud = readl_relaxed(base + SA1111_SKAUD); + save->skpwm0 = readl_relaxed(base + SA1111_SKPWM0); + save->skpwm1 = readl_relaxed(base + SA1111_SKPWM1); - sa1111_writel(0, sachip->base + SA1111_SKPWM0); - sa1111_writel(0, sachip->base + SA1111_SKPWM1); + writel_relaxed(0, sachip->base + SA1111_SKPWM0); + writel_relaxed(0, sachip->base + SA1111_SKPWM1); base = sachip->base + SA1111_INTC; - save->intpol0 = sa1111_readl(base + SA1111_INTPOL0); - save->intpol1 = sa1111_readl(base + SA1111_INTPOL1); - save->inten0 = sa1111_readl(base + SA1111_INTEN0); - save->inten1 = sa1111_readl(base + SA1111_INTEN1); - save->wakepol0 = sa1111_readl(base + SA1111_WAKEPOL0); - save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1); - save->wakeen0 = sa1111_readl(base + SA1111_WAKEEN0); - save->wakeen1 = sa1111_readl(base + SA1111_WAKEEN1); + save->intpol0 = readl_relaxed(base + SA1111_INTPOL0); + save->intpol1 = readl_relaxed(base + SA1111_INTPOL1); + save->inten0 = readl_relaxed(base + SA1111_INTEN0); + save->inten1 = readl_relaxed(base + SA1111_INTEN1); + save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0); + save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1); + save->wakeen0 = readl_relaxed(base + SA1111_WAKEEN0); + save->wakeen1 = readl_relaxed(base + SA1111_WAKEEN1); /* * Disable. */ - val = sa1111_readl(sachip->base + SA1111_SKCR); - sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR); + val = readl_relaxed(sachip->base + SA1111_SKCR); + writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR); clk_disable(sachip->clk); @@ -1023,7 +1055,7 @@ static int sa1111_resume_noirq(struct device *dev) * Ensure that the SA1111 is still here. * FIXME: shouldn't do this here. */ - id = sa1111_readl(sachip->base + SA1111_SKID); + id = readl_relaxed(sachip->base + SA1111_SKID); if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { __sa1111_remove(sachip); dev_set_drvdata(dev, NULL); @@ -1047,26 +1079,26 @@ static int sa1111_resume_noirq(struct device *dev) */ spin_lock_irqsave(&sachip->lock, flags); - sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0); - sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1); + writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0); + writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1); base = sachip->base; - sa1111_writel(save->skcr, base + SA1111_SKCR); - sa1111_writel(save->skpcr, base + SA1111_SKPCR); - sa1111_writel(save->skcdr, base + SA1111_SKCDR); - sa1111_writel(save->skaud, base + SA1111_SKAUD); - sa1111_writel(save->skpwm0, base + SA1111_SKPWM0); - sa1111_writel(save->skpwm1, base + SA1111_SKPWM1); + writel_relaxed(save->skcr, base + SA1111_SKCR); + writel_relaxed(save->skpcr, base + SA1111_SKPCR); + writel_relaxed(save->skcdr, base + SA1111_SKCDR); + writel_relaxed(save->skaud, base + SA1111_SKAUD); + writel_relaxed(save->skpwm0, base + SA1111_SKPWM0); + writel_relaxed(save->skpwm1, base + SA1111_SKPWM1); base = sachip->base + SA1111_INTC; - sa1111_writel(save->intpol0, base + SA1111_INTPOL0); - sa1111_writel(save->intpol1, base + SA1111_INTPOL1); - sa1111_writel(save->inten0, base + SA1111_INTEN0); - sa1111_writel(save->inten1, base + SA1111_INTEN1); - sa1111_writel(save->wakepol0, base + SA1111_WAKEPOL0); - sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1); - sa1111_writel(save->wakeen0, base + SA1111_WAKEEN0); - sa1111_writel(save->wakeen1, base + SA1111_WAKEEN1); + writel_relaxed(save->intpol0, base + SA1111_INTPOL0); + writel_relaxed(save->intpol1, base + SA1111_INTPOL1); + writel_relaxed(save->inten0, base + SA1111_INTEN0); + writel_relaxed(save->inten1, base + SA1111_INTEN1); + writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0); + writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1); + writel_relaxed(save->wakeen0, base + SA1111_WAKEEN0); + writel_relaxed(save->wakeen1, base + SA1111_WAKEEN1); spin_unlock_irqrestore(&sachip->lock, flags); @@ -1153,7 +1185,7 @@ static unsigned int __sa1111_pll_clock(struct sa1111 *sachip) { unsigned int skcdr, fbdiv, ipdiv, opdiv; - skcdr = sa1111_readl(sachip->base + SA1111_SKCDR); + skcdr = readl_relaxed(sachip->base + SA1111_SKCDR); fbdiv = (skcdr & 0x007f) + 2; ipdiv = ((skcdr & 0x0f80) >> 7) + 2; @@ -1195,13 +1227,13 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode) spin_lock_irqsave(&sachip->lock, flags); - val = sa1111_readl(sachip->base + SA1111_SKCR); + val = readl_relaxed(sachip->base + SA1111_SKCR); if (mode == SA1111_AUDIO_I2S) { val &= ~SKCR_SELAC; } else { val |= SKCR_SELAC; } - sa1111_writel(val, sachip->base + SA1111_SKCR); + writel_relaxed(val, sachip->base + SA1111_SKCR); spin_unlock_irqrestore(&sachip->lock, flags); } @@ -1226,7 +1258,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate) if (div > 128) div = 128; - sa1111_writel(div - 1, sachip->base + SA1111_SKAUD); + writel_relaxed(div - 1, sachip->base + SA1111_SKAUD); return 0; } @@ -1244,7 +1276,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev) if (sadev->devid != SA1111_DEVID_SAC) return -EINVAL; - div = sa1111_readl(sachip->base + SA1111_SKAUD) + 1; + div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1; return __sa1111_pll_clock(sachip) / (256 * div); } @@ -1261,10 +1293,10 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev, #define MODIFY_BITS(port, mask, dir) \ if (mask) { \ - val = sa1111_readl(port); \ + val = readl_relaxed(port); \ val &= ~(mask); \ val |= (dir) & (mask); \ - sa1111_writel(val, port); \ + writel_relaxed(val, port); \ } spin_lock_irqsave(&sachip->lock, flags); @@ -1329,8 +1361,8 @@ int sa1111_enable_device(struct sa1111_dev *sadev) if (ret == 0) { spin_lock_irqsave(&sachip->lock, flags); - val = sa1111_readl(sachip->base + SA1111_SKPCR); - sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); + val = readl_relaxed(sachip->base + SA1111_SKPCR); + writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); } return ret; @@ -1348,8 +1380,8 @@ void sa1111_disable_device(struct sa1111_dev *sadev) unsigned int val; spin_lock_irqsave(&sachip->lock, flags); - val = sa1111_readl(sachip->base + SA1111_SKPCR); - sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); + val = readl_relaxed(sachip->base + SA1111_SKPCR); + writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); if (sachip->pdata && sachip->pdata->disable) @@ -1359,9 +1391,10 @@ EXPORT_SYMBOL(sa1111_disable_device); int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num) { - if (num >= ARRAY_SIZE(sadev->irq)) + struct sa1111 *sachip = sa1111_chip_driver(sadev); + if (num >= ARRAY_SIZE(sadev->hwirq)) return -EINVAL; - return sadev->irq[num]; + return sa1111_map_irq(sachip, sadev->hwirq[num]); } EXPORT_SYMBOL_GPL(sa1111_get_irq); @@ -1379,36 +1412,6 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv) return !!(dev->devid & drv->devid); } -static int sa1111_bus_suspend(struct device *dev, pm_message_t state) -{ - struct sa1111_dev *sadev = to_sa1111_device(dev); - struct sa1111_driver *drv = SA1111_DRV(dev->driver); - int ret = 0; - - if (drv && drv->suspend) - ret = drv->suspend(sadev, state); - return ret; -} - -static int sa1111_bus_resume(struct device *dev) -{ - struct sa1111_dev *sadev = to_sa1111_device(dev); - struct sa1111_driver *drv = SA1111_DRV(dev->driver); - int ret = 0; - - if (drv && drv->resume) - ret = drv->resume(sadev); - return ret; -} - -static void sa1111_bus_shutdown(struct device *dev) -{ - struct sa1111_driver *drv = SA1111_DRV(dev->driver); - - if (drv && drv->shutdown) - drv->shutdown(to_sa1111_device(dev)); -} - static int sa1111_bus_probe(struct device *dev) { struct sa1111_dev *sadev = to_sa1111_device(dev); @@ -1436,9 +1439,6 @@ struct bus_type sa1111_bus_type = { .match = sa1111_match, .probe = sa1111_bus_probe, .remove = sa1111_bus_remove, - .suspend = sa1111_bus_suspend, - .resume = sa1111_bus_resume, - .shutdown = sa1111_bus_shutdown, }; EXPORT_SYMBOL(sa1111_bus_type); diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig index 63a953d855a6..c6dcd6e4f4e6 100644 --- a/arch/arm/configs/cns3420vb_defconfig +++ b/arch/arm/configs/cns3420vb_defconfig @@ -28,7 +28,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index bd0cf22f9ceb..026154c1d55a 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -94,6 +94,7 @@ CONFIG_PPP=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m +CONFIG_USB_USBNET=m CONFIG_INPUT_EVDEV=m CONFIG_INPUT_EVBUG=m CONFIG_KEYBOARD_ATKBD=m diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index f1d7834990ec..629189c62fd1 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -3,6 +3,7 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y +CONFIG_PERF_EVENTS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y @@ -179,6 +180,7 @@ CONFIG_REGULATOR_TPS65090=y CONFIG_REGULATOR_WM8994=y CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y @@ -195,6 +197,8 @@ CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVID=m +CONFIG_CEC_PLATFORM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_S5P_CEC=m CONFIG_DRM=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y @@ -207,6 +211,7 @@ CONFIG_DRM_PANEL_SAMSUNG_LD9040=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y CONFIG_DRM_NXP_PTN3460=y CONFIG_DRM_PARADE_PS8622=y +CONFIG_DRM_SII9234=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_PWM=y @@ -218,6 +223,7 @@ CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y CONFIG_SND_SOC_SMDK_WM8994_PCM=y CONFIG_SND_SOC_SNOW=y +CONFIG_SND_SOC_ODROID=y CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -281,6 +287,7 @@ CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y +CONFIG_EXYNOS_IOMMU=y CONFIG_EXTCON=y CONFIG_EXTCON_MAX14577=y CONFIG_EXTCON_MAX77693=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 0d4494922561..4cb9829fccd1 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -55,6 +55,7 @@ CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -80,6 +81,7 @@ CONFIG_CAN=y CONFIG_CAN_FLEXCAN=y CONFIG_BT=y CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_SERDEV=y CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_LL=y CONFIG_CFG80211=y @@ -155,6 +157,7 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_CDC_EEM=m CONFIG_BRCMFMAC=m CONFIG_WL12XX=m +CONFIG_WL18XX=m CONFIG_WLCORE_SDIO=m # CONFIG_WILINK_PLATFORM_DATA is not set CONFIG_INPUT_EVDEV=y @@ -185,6 +188,8 @@ CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_SERIAL_DEV_BUS=y +CONFIG_SERIAL_DEV_CTRL_TTYPORT=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y @@ -248,6 +253,7 @@ CONFIG_VIDEO_OV5640=m CONFIG_SOC_CAMERA_OV2640=y CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y +CONFIG_DRM_PANEL_LVDS=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_DW_HDMI_AHB_AUDIO=m CONFIG_DRM_DW_HDMI_CEC=y @@ -340,6 +346,7 @@ CONFIG_LEDS_TRIGGER_ONESHOT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_DS1307=y @@ -349,6 +356,7 @@ CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y +CONFIG_RTC_DRV_MXC_V2=y CONFIG_RTC_DRV_SNVS=y CONFIG_DMADEVICES=y CONFIG_FSL_EDMA=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index f710c192b33a..2536c231eea1 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -228,3 +228,10 @@ CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y +CONFIG_SPI_CADENCE_QUADSPI=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_GPIO_DECODER=m +CONFIG_GPIO_PCA953X=m +CONFIG_LEDS_TRIGGER_ACTIVITY=y +CONFIG_LEDS_TRIGGER_CPU=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index ec5674c229a3..de5be2fc7306 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -54,7 +54,6 @@ CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m CONFIG_BT_HCIBTUSB=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index cf7dcb2c86e6..88ea02e7ba19 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -77,7 +77,6 @@ CONFIG_MAC80211=m CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_CONNECTOR=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index b659244902cd..da7387689b88 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -115,6 +115,8 @@ CONFIG_ARCH_ZYNQ=y CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_PCI=y CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_DRA7XX=y +CONFIG_PCI_DRA7XX_EP=y CONFIG_PCI_KEYSTONE=y CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y @@ -122,6 +124,9 @@ CONFIG_PCI_TEGRA=y CONFIG_PCI_RCAR_GEN2=y CONFIG_PCIE_RCAR=y CONFIG_PCIEPORTBUS=y +CONFIG_PCI_ENDPOINT=y +CONFIG_PCI_ENDPOINT_CONFIGFS=y +CONFIG_PCI_EPF_TEST=m CONFIG_SMP=y CONFIG_NR_CPUS=16 CONFIG_HIGHPTE=y @@ -221,6 +226,7 @@ CONFIG_ATMEL_SSC=m CONFIG_QCOM_COINCELL=m CONFIG_APDS9802ALS=y CONFIG_ISL29003=y +CONFIG_PCI_ENDPOINT_TEST=m CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y @@ -556,6 +562,7 @@ CONFIG_REGULATOR_VEXPRESS=y CONFIG_REGULATOR_WM8994=m CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y @@ -581,6 +588,8 @@ CONFIG_VIDEO_STI_DELTA=m CONFIG_VIDEO_RENESAS_JPU=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_V4L_TEST_DRIVERS=y +CONFIG_CEC_PLATFORM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_S5P_CEC=m # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ML86V7667=m @@ -612,6 +621,7 @@ CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_SII9234=m CONFIG_DRM_STI=m CONFIG_DRM_VC4=y CONFIG_FB_ARMCLCD=y @@ -650,6 +660,7 @@ CONFIG_SND_SOC_SAMSUNG=m CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m CONFIG_SND_SOC_SMDK_WM8994_PCM=m CONFIG_SND_SOC_SNOW=m +CONFIG_SND_SOC_ODROID=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SIMPLE_SCU_CARD=m @@ -878,6 +889,7 @@ CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_HLCDC_PWM=m CONFIG_PWM_ATMEL_TCB=m CONFIG_PWM_FSL_FTM=m +CONFIG_PWM_RCAR=m CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_ROCKCHIP=m CONFIG_PWM_SAMSUNG=m diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 752e2e74de5b..0448bd8075ac 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -37,7 +37,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index e5822ab01b7d..bbfb6759447b 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -46,7 +46,6 @@ CONFIG_CAN_FLEXCAN=m # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 7b97200c1d64..2f145c4af93a 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -48,6 +48,13 @@ CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_DRA7XX=y +CONFIG_PCI_DRA7XX_EP=y +CONFIG_PCI_ENDPOINT=y +CONFIG_PCI_ENDPOINT_CONFIGFS=y +CONFIG_PCI_EPF_TEST=m CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_CMA=y @@ -137,6 +144,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_TSL2550=m CONFIG_SRAM=y +CONFIG_PCI_ENDPOINT_TEST=m CONFIG_EEPROM_AT24=m CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SCAN_ASYNC=y @@ -468,6 +476,7 @@ CONFIG_PWM_TIECAP=m CONFIG_PWM_TIEHRPWM=m CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m +CONFIG_PHY_CPCAP_USB=m CONFIG_PHY_DM816X_USB=m CONFIG_OMAP_USB2=m CONFIG_TI_PIPE3=y @@ -516,3 +525,13 @@ CONFIG_LIBCRC32C=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM=m +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_CRYPTO_GHASH_ARM_CE=m diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index b831baddae02..bf9046331f6e 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -60,7 +60,6 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_NET_DSA=y CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index c784d04e2ab7..dd2a089f939f 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -136,7 +136,9 @@ CONFIG_REGULATOR_QCOM_RPM=y CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_MEDIA_SUPPORT=y +CONFIG_DRM=y CONFIG_FB=y +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y @@ -200,6 +202,7 @@ CONFIG_MSM_LCC_8960=y CONFIG_MDM_LCC_9615=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y +CONFIG_MSM_IOMMU=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_REMOTEPROC=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 7b4fc0143148..578434cfd1a0 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -173,6 +173,7 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_SH4_FSI=y CONFIG_SND_SOC_RCAR=y CONFIG_SND_SOC_AK4642=y +CONFIG_SND_SOC_SGTL5000=y CONFIG_SND_SOC_WM8978=y CONFIG_SND_SIMPLE_SCU_CARD=y CONFIG_USB=y @@ -207,6 +208,7 @@ CONFIG_STAGING_BOARD=y CONFIG_IIO=y CONFIG_AK8975=y CONFIG_PWM=y +CONFIG_PWM_RCAR=y CONFIG_PWM_RENESAS_TPU=y CONFIG_GENERIC_PHY=y CONFIG_PHY_RCAR_GEN2=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index c819be04187e..c7b99ebf5fcf 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -75,7 +75,6 @@ CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_TEGRA_GMI=y diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig index b7ecb83a95b6..a89f035c3b01 100644 --- a/arch/arm/configs/vf610m4_defconfig +++ b/arch/arm/configs/vf610m4_defconfig @@ -23,7 +23,6 @@ CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_UEVENT_HELPER is not set # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set # CONFIG_ALLOW_DEV_COREDUMP is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c index 18768f330449..07e31941dc67 100644 --- a/arch/arm/crypto/aes-neonbs-glue.c +++ b/arch/arm/crypto/aes-neonbs-glue.c @@ -181,9 +181,8 @@ static int cbc_init(struct crypto_tfm *tfm) struct aesbs_cbc_ctx *ctx = crypto_tfm_ctx(tfm); ctx->enc_tfm = crypto_alloc_cipher("aes", 0, 0); - if (IS_ERR(ctx->enc_tfm)) - return PTR_ERR(ctx->enc_tfm); - return 0; + + return PTR_ERR_OR_ZERO(ctx->enc_tfm); } static void cbc_exit(struct crypto_tfm *tfm) @@ -258,9 +257,8 @@ static int xts_init(struct crypto_tfm *tfm) struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm); ctx->tweak_tfm = crypto_alloc_cipher("aes", 0, 0); - if (IS_ERR(ctx->tweak_tfm)) - return PTR_ERR(ctx->tweak_tfm); - return 0; + + return PTR_ERR_OR_ZERO(ctx->tweak_tfm); } static void xts_exit(struct crypto_tfm *tfm) diff --git a/arch/arm/crypto/crc32-ce-glue.c b/arch/arm/crypto/crc32-ce-glue.c index 1b0e0e86ee9c..96e62ec105d0 100644 --- a/arch/arm/crypto/crc32-ce-glue.c +++ b/arch/arm/crypto/crc32-ce-glue.c @@ -188,6 +188,7 @@ static struct shash_alg crc32_pmull_algs[] = { { .base.cra_name = "crc32", .base.cra_driver_name = "crc32-arm-ce", .base.cra_priority = 200, + .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, .base.cra_blocksize = 1, .base.cra_module = THIS_MODULE, }, { @@ -203,6 +204,7 @@ static struct shash_alg crc32_pmull_algs[] = { { .base.cra_name = "crc32c", .base.cra_driver_name = "crc32c-arm-ce", .base.cra_priority = 200, + .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, .base.cra_blocksize = 1, .base.cra_module = THIS_MODULE, } }; diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 0f2c8a2a8131..873e3c189279 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,4 +1,3 @@ -generic-y += clkdev.h generic-y += current.h generic-y += early_ioremap.h generic-y += emergency-restart.h diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h new file mode 100644 index 000000000000..5b0a8a421894 --- /dev/null +++ b/arch/arm/include/asm/dma-direct.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef ASM_ARM_DMA_DIRECT_H +#define ASM_ARM_DMA_DIRECT_H 1 + +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + unsigned int offset = paddr & ~PAGE_MASK; + return pfn_to_dma(dev, __phys_to_pfn(paddr)) + offset; +} + +static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr) +{ + unsigned int offset = dev_addr & ~PAGE_MASK; + return __pfn_to_phys(dma_to_pfn(dev, dev_addr)) + offset; +} + +static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) +{ + u64 limit, mask; + + if (!dev->dma_mask) + return 0; + + mask = *dev->dma_mask; + + limit = (mask + 1) & ~mask; + if (limit && size > limit) + return 0; + + if ((addr | (addr + size - 1)) & ~mask) + return 0; + + return 1; +} + +#endif /* ASM_ARM_DMA_DIRECT_H */ diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index daf837423a76..8436f6ade57d 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -18,7 +18,7 @@ extern const struct dma_map_ops arm_coherent_dma_ops; static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) { - return IS_ENABLED(CONFIG_MMU) ? &arm_dma_ops : &dma_noop_ops; + return IS_ENABLED(CONFIG_MMU) ? &arm_dma_ops : &dma_direct_ops; } #ifdef __arch_page_to_dma @@ -109,39 +109,6 @@ static inline bool is_device_dma_coherent(struct device *dev) return dev->archdata.dma_coherent; } -static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - unsigned int offset = paddr & ~PAGE_MASK; - return pfn_to_dma(dev, __phys_to_pfn(paddr)) + offset; -} - -static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr) -{ - unsigned int offset = dev_addr & ~PAGE_MASK; - return __pfn_to_phys(dma_to_pfn(dev, dev_addr)) + offset; -} - -static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) -{ - u64 limit, mask; - - if (!dev->dma_mask) - return 0; - - mask = *dev->dma_mask; - - limit = (mask + 1) & ~mask; - if (limit && size > limit) - return 0; - - if ((addr | (addr + size - 1)) & ~mask) - return 0; - - return 1; -} - -static inline void dma_mark_clean(void *addr, size_t size) { } - /** * arm_dma_alloc - allocate consistent memory for DMA * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h index a7273ad9587a..58e039a851af 100644 --- a/arch/arm/include/asm/exception.h +++ b/arch/arm/include/asm/exception.h @@ -10,11 +10,10 @@ #include <linux/interrupt.h> -#define __exception __attribute__((section(".exception.text"))) #ifdef CONFIG_FUNCTION_GRAPH_TRACER #define __exception_irq_entry __irq_entry #else -#define __exception_irq_entry __exception +#define __exception_irq_entry #endif #endif /* __ASM_ARM_EXCEPTION_H */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index 01c3d92624e5..8d1f498e5dd8 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -117,6 +117,10 @@ # endif #endif +#if defined(CONFIG_CACHE_B15_RAC) +# define MULTI_CACHE 1 +#endif + #if defined(CONFIG_CPU_V7M) # define MULTI_CACHE 1 #endif diff --git a/arch/arm/include/asm/hardware/cache-b15-rac.h b/arch/arm/include/asm/hardware/cache-b15-rac.h new file mode 100644 index 000000000000..3d43ec06fd35 --- /dev/null +++ b/arch/arm/include/asm/hardware/cache-b15-rac.h @@ -0,0 +1,10 @@ +#ifndef __ASM_ARM_HARDWARE_CACHE_B15_RAC_H +#define __ASM_ARM_HARDWARE_CACHE_B15_RAC_H + +#ifndef __ASSEMBLY__ + +void b15_flush_kern_cache_all(void); + +#endif + +#endif diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h index 0bbf163d1ed3..798e520e8a49 100644 --- a/arch/arm/include/asm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -16,33 +16,6 @@ #include <mach/bitfield.h> /* - * The SA1111 is always located at virtual 0xf4000000, and is always - * "native" endian. - */ - -#define SA1111_VBASE 0xf4000000 - -/* Don't use these! */ -#define SA1111_p2v( x ) ((x) - SA1111_BASE + SA1111_VBASE) -#define SA1111_v2p( x ) ((x) - SA1111_VBASE + SA1111_BASE) - -#ifndef __ASSEMBLY__ -#define _SA1111(x) ((x) + sa1111->resource.start) -#endif - -#define sa1111_writel(val,addr) __raw_writel(val, addr) -#define sa1111_readl(addr) __raw_readl(addr) - -/* - * 26 bits of the SA-1110 address bus are available to the SA-1111. - * Use these when feeding target addresses to the DMA engines. - */ - -#define SA1111_ADDR_WIDTH (26) -#define SA1111_ADDR_MASK ((1<<SA1111_ADDR_WIDTH)-1) -#define SA1111_DMA_ADDR(x) ((x)&SA1111_ADDR_MASK) - -/* * Don't ask the (SAC) DMA engines to move less than this amount. */ @@ -417,7 +390,7 @@ struct sa1111_dev { struct resource res; void __iomem *mapbase; unsigned int skpcr_mask; - unsigned int irq[6]; + unsigned int hwirq[6]; u64 dma_mask; }; @@ -431,9 +404,6 @@ struct sa1111_driver { unsigned int devid; int (*probe)(struct sa1111_dev *); int (*remove)(struct sa1111_dev *); - int (*suspend)(struct sa1111_dev *, pm_message_t); - int (*resume)(struct sa1111_dev *); - void (*shutdown)(struct sa1111_dev *); }; #define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index a9f7d3f47134..acbf9ec7b396 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -238,6 +238,9 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, int exception_index); +static inline void handle_exit_early(struct kvm_vcpu *vcpu, struct kvm_run *run, + int exception_index) {} + static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr, unsigned long hyp_stack_ptr, unsigned long vector_ptr) @@ -301,4 +304,6 @@ int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, /* All host FP/SIMD state is restored on guest exit, so nothing to save: */ static inline void kvm_fpsimd_flush_cpu_state(void) {} +static inline void kvm_arm_vhe_guest_enter(void) {} +static inline void kvm_arm_vhe_guest_exit(void) {} #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index fa6f2174276b..a2d176a308bd 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -211,6 +211,11 @@ static inline bool __kvm_cpu_uses_extended_idmap(void) return false; } +static inline unsigned long __kvm_idmap_ptrs_per_pgd(void) +{ + return PTRS_PER_PGD; +} + static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd, pgd_t *hyp_pgd, pgd_t *merged_hyp_pgd, @@ -221,6 +226,18 @@ static inline unsigned int kvm_get_vmid_bits(void) return 8; } +static inline void *kvm_get_hyp_vector(void) +{ + return kvm_ksym_ref(__kvm_hyp_vector); +} + +static inline int kvm_map_vectors(void) +{ + return 0; +} + +#define kvm_phys_to_vttbr(addr) (addr) + #endif /* !__ASSEMBLY__ */ #endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 1f54e4e98c1e..496667703693 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -88,6 +88,7 @@ #else /* CONFIG_MMU */ #ifndef __ASSEMBLY__ +extern unsigned long setup_vectors_base(void); extern unsigned long vectors_base; #define VECTORS_BASE vectors_base #endif diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 960d9dc4f380..1f0de808d111 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -10,10 +10,7 @@ extern unsigned long pcibios_min_io; extern unsigned long pcibios_min_mem; #define PCIBIOS_MIN_MEM pcibios_min_mem -static inline int pcibios_assign_all_busses(void) -{ - return pci_has_flag(PCI_REASSIGN_ALL_RSRC); -} +#define pcibios_assign_all_busses() pci_has_flag(PCI_REASSIGN_ALL_BUS) #ifdef CONFIG_PCI_DOMAINS static inline int pci_proc_domain(struct pci_bus *bus) diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 1a7a17b2a1ba..2a4836087358 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -249,6 +249,9 @@ PMD_BIT_FUNC(mkyoung, |= PMD_SECT_AF); #define pfn_pmd(pfn,prot) (__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))) #define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot) +/* No hardware dirty/accessed bits -- generic_pmdp_establish() fits */ +#define pmdp_establish generic_pmdp_establish + /* represent a notpresent pmd by faulting entry, this is used by pmdp_invalidate */ static inline pmd_t pmd_mknotpresent(pmd_t pmd) { diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 338cbe0a18ef..1bf65b47808a 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -45,6 +45,16 @@ struct thread_struct { struct debug_info debug; }; +/* + * Everything usercopied to/from thread_struct is statically-sized, so + * no hardened usercopy whitelist is needed. + */ +static inline void arch_thread_struct_whitelist(unsigned long *offset, + unsigned long *size) +{ + *offset = *size = 0; +} + #define INIT_THREAD { } #define start_thread(regs,pc,sp) \ diff --git a/arch/arm/include/asm/ptdump.h b/arch/arm/include/asm/ptdump.h new file mode 100644 index 000000000000..3ebf9718288d --- /dev/null +++ b/arch/arm/include/asm/ptdump.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2014 ARM Ltd. */ +#ifndef __ASM_PTDUMP_H +#define __ASM_PTDUMP_H + +#ifdef CONFIG_ARM_PTDUMP_CORE + +#include <linux/mm_types.h> +#include <linux/seq_file.h> + +struct addr_marker { + unsigned long start_address; + char *name; +}; + +struct ptdump_info { + struct mm_struct *mm; + const struct addr_marker *markers; + unsigned long base_addr; +}; + +void ptdump_walk_pgd(struct seq_file *s, struct ptdump_info *info); +#ifdef CONFIG_ARM_PTDUMP_DEBUGFS +int ptdump_debugfs_register(struct ptdump_info *info, const char *name); +#else +static inline int ptdump_debugfs_register(struct ptdump_info *info, + const char *name) +{ + return 0; +} +#endif /* CONFIG_ARM_PTDUMP_DEBUGFS */ + +void ptdump_check_wx(void); + +#endif /* CONFIG_ARM_PTDUMP_CORE */ + +#ifdef CONFIG_DEBUG_WX +#define debug_checkwx() ptdump_check_wx() +#else +#define debug_checkwx() do { } while (0) +#endif + +#endif /* __ASM_PTDUMP_H */ diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h index 63dfe1f10335..4ceb4f757d4d 100644 --- a/arch/arm/include/asm/sections.h +++ b/arch/arm/include/asm/sections.h @@ -6,4 +6,25 @@ extern char _exiprom[]; +extern char __idmap_text_start[]; +extern char __idmap_text_end[]; +extern char __entry_text_start[]; +extern char __entry_text_end[]; +extern char __hyp_idmap_text_start[]; +extern char __hyp_idmap_text_end[]; + +static inline bool in_entry_text(unsigned long addr) +{ + return memory_contains(__entry_text_start, __entry_text_end, + (void *)addr, 1); +} + +static inline bool in_idmap_text(unsigned long addr) +{ + void *a = (void *)addr; + return memory_contains(__idmap_text_start, __idmap_text_end, a, 1) || + memory_contains(__hyp_idmap_text_start, __hyp_idmap_text_end, + a, 1); +} + #endif /* _ASM_ARM_SECTIONS_H */ diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h index f54a3136aac6..111a1d8a41dd 100644 --- a/arch/arm/include/asm/string.h +++ b/arch/arm/include/asm/string.h @@ -39,18 +39,4 @@ static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n) return __memset64(p, v, n * 8, v >> 32); } -extern void __memzero(void *ptr, __kernel_size_t n); - -#define memset(p,v,n) \ - ({ \ - void *__p = (p); size_t __n = n; \ - if ((__n) != 0) { \ - if (__builtin_constant_p((v)) && (v) == 0) \ - __memzero((__p),(__n)); \ - else \ - memset((__p),(v),(__n)); \ - } \ - (__p); \ - }) - #endif diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index f9a6c5fc3fd1..a00288d75ee6 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -28,18 +28,6 @@ static inline int __in_irqentry_text(unsigned long ptr) ptr < (unsigned long)&__irqentry_text_end; } -static inline int in_exception_text(unsigned long ptr) -{ - extern char __exception_text_start[]; - extern char __exception_text_end[]; - int in; - - in = ptr >= (unsigned long)&__exception_text_start && - ptr < (unsigned long)&__exception_text_end; - - return in ? : __in_irqentry_text(ptr); -} - extern void __init early_trap_init(void *); extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame); extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs); diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h index a91ae499614c..2c3b952be63e 100644 --- a/arch/arm/include/asm/unified.h +++ b/arch/arm/include/asm/unified.h @@ -20,8 +20,10 @@ #ifndef __ASM_UNIFIED_H #define __ASM_UNIFIED_H -#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED) +#if defined(__ASSEMBLY__) .syntax unified +#else +__asm__(".syntax unified"); #endif #ifdef CONFIG_CPU_V7M @@ -64,77 +66,4 @@ #endif /* CONFIG_THUMB2_KERNEL */ -#ifndef CONFIG_ARM_ASM_UNIFIED - -/* - * If the unified assembly syntax isn't used (in ARM mode), these - * macros expand to an empty string - */ -#ifdef __ASSEMBLY__ - .macro it, cond - .endm - .macro itt, cond - .endm - .macro ite, cond - .endm - .macro ittt, cond - .endm - .macro itte, cond - .endm - .macro itet, cond - .endm - .macro itee, cond - .endm - .macro itttt, cond - .endm - .macro ittte, cond - .endm - .macro ittet, cond - .endm - .macro ittee, cond - .endm - .macro itett, cond - .endm - .macro itete, cond - .endm - .macro iteet, cond - .endm - .macro iteee, cond - .endm -#else /* !__ASSEMBLY__ */ -__asm__( -" .macro it, cond\n" -" .endm\n" -" .macro itt, cond\n" -" .endm\n" -" .macro ite, cond\n" -" .endm\n" -" .macro ittt, cond\n" -" .endm\n" -" .macro itte, cond\n" -" .endm\n" -" .macro itet, cond\n" -" .endm\n" -" .macro itee, cond\n" -" .endm\n" -" .macro itttt, cond\n" -" .endm\n" -" .macro ittte, cond\n" -" .endm\n" -" .macro ittet, cond\n" -" .endm\n" -" .macro ittee, cond\n" -" .endm\n" -" .macro itett, cond\n" -" .endm\n" -" .macro itete, cond\n" -" .endm\n" -" .macro iteet, cond\n" -" .endm\n" -" .macro iteee, cond\n" -" .endm\n"); -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_ARM_ASM_UNIFIED */ - #endif /* !__ASM_UNIFIED_H */ diff --git a/arch/arm/include/uapi/asm/siginfo.h b/arch/arm/include/uapi/asm/siginfo.h new file mode 100644 index 000000000000..d0513880be21 --- /dev/null +++ b/arch/arm/include/uapi/asm/siginfo.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SIGINFO_H +#define __ASM_SIGINFO_H + +#include <asm-generic/siginfo.h> + +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 5266fd9ad6b4..783fbb4de5f9 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -92,7 +92,6 @@ EXPORT_SYMBOL(__memset64); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memchr); -EXPORT_SYMBOL(__memzero); EXPORT_SYMBOL(mmioset); EXPORT_SYMBOL(mmiocpy); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 0cd0aefb3a8f..ed46ca69813d 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -527,7 +527,7 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) struct pci_sys_data *sys; LIST_HEAD(head); - pci_add_flags(PCI_REASSIGN_ALL_RSRC); + pci_add_flags(PCI_REASSIGN_ALL_BUS); if (hw->preinit) hw->preinit(); pcibios_init_hw(parent, hw, &head); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index fbc707626b3e..1752033b0070 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -82,11 +82,7 @@ #endif .endm -#ifdef CONFIG_KPROBES - .section .kprobes.text,"ax",%progbits -#else - .text -#endif + .section .entry.text,"ax",%progbits /* * Invalid mode handlers diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index e655dcd0a933..3c4f88701f22 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -37,6 +37,7 @@ saved_pc .req lr #define TRACE(x...) #endif + .section .entry.text,"ax",%progbits .align 5 #if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING)) /* diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 21dde771a7dd..6e0375e7db05 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -105,8 +105,9 @@ __mmap_switched: ARM( ldmia r4!, {r0, r1, sp} ) THUMB( ldmia r4!, {r0, r1, r3} ) THUMB( mov sp, r3 ) - sub r1, r1, r0 - bl __memzero @ clear .bss + sub r2, r1, r0 + mov r1, #0 + bl memset @ clear .bss ldmia r4, {r0, r1, r2, r3} str r9, [r0] @ Save processor ID diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index af2a7f1e3103..629e25152c0d 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -44,17 +44,17 @@ static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]); static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]); /* Number of BRP/WRP registers on this CPU. */ -static int core_num_brps; -static int core_num_wrps; +static int core_num_brps __ro_after_init; +static int core_num_wrps __ro_after_init; /* Debug architecture version. */ -static u8 debug_arch; +static u8 debug_arch __ro_after_init; /* Does debug architecture support OS Save and Restore? */ -static bool has_ossr; +static bool has_ossr __ro_after_init; /* Maximum supported watchpoint length. */ -static u8 max_watchpoint_len; +static u8 max_watchpoint_len __ro_after_init; #define READ_WB_REG_CASE(OP2, M, VAL) \ case ((OP2 << 4) + M): \ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index d96714e1858c..1523cb18b109 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -21,7 +21,6 @@ #include <linux/unistd.h> #include <linux/user.h> #include <linux/interrupt.h> -#include <linux/kallsyms.h> #include <linux/init.h> #include <linux/elfcore.h> #include <linux/pm.h> @@ -121,8 +120,8 @@ void __show_regs(struct pt_regs *regs) show_regs_print_info(KERN_DEFAULT); - print_symbol("PC is at %s\n", instruction_pointer(regs)); - print_symbol("LR is at %s\n", regs->ARM_lr); + printk("PC is at %pS\n", (void *)instruction_pointer(regs)); + printk("LR is at %pS\n", (void *)regs->ARM_lr); printk("pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n", regs->ARM_pc, regs->ARM_lr, regs->ARM_cpsr); printk("sp : %08lx ip : %08lx fp : %08lx\n", diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 58e3771e4c5b..7724b0f661b3 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -390,7 +390,6 @@ static void ptrace_hbptriggered(struct perf_event *bp, struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp); long num; int i; - siginfo_t info; for (i = 0; i < ARM_MAX_HBP_SLOTS; ++i) if (current->thread.debug.hbp[i] == bp) @@ -398,12 +397,7 @@ static void ptrace_hbptriggered(struct perf_event *bp, num = (i == ARM_MAX_HBP_SLOTS) ? 0 : ptrace_hbp_idx_to_num(i); - info.si_signo = SIGTRAP; - info.si_errno = (int)num; - info.si_code = TRAP_HWBKPT; - info.si_addr = (void __user *)(bkpt->trigger); - - force_sig_info(SIGTRAP, &info, current); + force_sig_ptrace_errno_trap((int)num, (void __user *)(bkpt->trigger)); } /* diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index b4fbf00ee4ad..2da087926ebe 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -379,6 +379,9 @@ asmlinkage void secondary_start_kernel(void) cpu_init(); +#ifndef CONFIG_MMU + setup_vectors_base(); +#endif pr_debug("CPU%u: Booted secondary processor\n", cpu); preempt_disable(); diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index 65228bf4c6df..a56e7c856ab5 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -3,6 +3,7 @@ #include <linux/sched/debug.h> #include <linux/stacktrace.h> +#include <asm/sections.h> #include <asm/stacktrace.h> #include <asm/traps.h> @@ -63,7 +64,6 @@ EXPORT_SYMBOL(walk_stackframe); #ifdef CONFIG_STACKTRACE struct stack_trace_data { struct stack_trace *trace; - unsigned long last_pc; unsigned int no_sched_functions; unsigned int skip; }; @@ -87,16 +87,7 @@ static int save_trace(struct stackframe *frame, void *d) if (trace->nr_entries >= trace->max_entries) return 1; - /* - * in_exception_text() is designed to test if the PC is one of - * the functions which has an exception stack above it, but - * unfortunately what is in frame->pc is the return LR value, - * not the saved PC value. So, we need to track the previous - * frame PC value when doing this. - */ - addr = data->last_pc; - data->last_pc = frame->pc; - if (!in_exception_text(addr)) + if (!in_entry_text(frame->pc)) return 0; regs = (struct pt_regs *)frame->sp; @@ -114,7 +105,6 @@ static noinline void __save_stack_trace(struct task_struct *tsk, struct stackframe frame; data.trace = trace; - data.last_pc = ULONG_MAX; data.skip = trace->skip; data.no_sched_functions = nosched; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 3e26c6f7a191..5e3633c24e63 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -72,7 +72,7 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from); #endif - if (in_exception_text(where)) + if (in_entry_text(from)) dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs)); } @@ -433,7 +433,7 @@ static int call_undef_hook(struct pt_regs *regs, unsigned int instr) return fn ? fn(regs, instr) : 1; } -asmlinkage void __exception do_undefinstr(struct pt_regs *regs) +asmlinkage void do_undefinstr(struct pt_regs *regs) { unsigned int instr; siginfo_t info; diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index ec4b3f94ad80..12b87591eb7c 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -96,9 +96,9 @@ SECTIONS .text : { /* Real text segment */ _stext = .; /* Text and read-only data */ IDMAP_TEXT - __exception_text_start = .; - *(.exception.text) - __exception_text_end = .; + __entry_text_start = .; + *(.entry.text) + __entry_text_end = .; IRQENTRY_TEXT TEXT_TEXT SCHED_TEXT diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index ee53f6518872..84a1ae3ce46e 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -105,9 +105,9 @@ SECTIONS .text : { /* Real text segment */ _stext = .; /* Text and read-only data */ IDMAP_TEXT - __exception_text_start = .; - *(.exception.text) - __exception_text_end = .; + __entry_text_start = .; + *(.entry.text) + __entry_text_end = .; IRQENTRY_TEXT SOFTIRQENTRY_TEXT TEXT_TEXT diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 4cb0b9624d8f..ad25fd1872c7 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -8,7 +8,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ delay.o delay-loop.o findbit.o memchr.o memcpy.o \ - memmove.o memset.o memzero.o setbit.o \ + memmove.o memset.o setbit.o \ strchr.o strrchr.o \ testchangebit.o testclearbit.o testsetbit.o \ ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S deleted file mode 100644 index 0eded952e089..000000000000 --- a/arch/arm/lib/memzero.S +++ /dev/null @@ -1,137 +0,0 @@ -/* - * linux/arch/arm/lib/memzero.S - * - * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/unwind.h> - - .text - .align 5 - .word 0 -/* - * Align the pointer in r0. r3 contains the number of bytes that we are - * mis-aligned by, and r1 is the number of bytes. If r1 < 4, then we - * don't bother; we use byte stores instead. - */ -UNWIND( .fnstart ) -1: subs r1, r1, #4 @ 1 do we have enough - blt 5f @ 1 bytes to align with? - cmp r3, #2 @ 1 - strltb r2, [r0], #1 @ 1 - strleb r2, [r0], #1 @ 1 - strb r2, [r0], #1 @ 1 - add r1, r1, r3 @ 1 (r1 = r1 - (4 - r3)) -/* - * The pointer is now aligned and the length is adjusted. Try doing the - * memzero again. - */ - -ENTRY(__memzero) - mov r2, #0 @ 1 - ands r3, r0, #3 @ 1 unaligned? - bne 1b @ 1 -/* - * r3 = 0, and we know that the pointer in r0 is aligned to a word boundary. - */ - cmp r1, #16 @ 1 we can skip this chunk if we - blt 4f @ 1 have < 16 bytes - -#if ! CALGN(1)+0 - -/* - * We need an extra register for this loop - save the return address and - * use the LR - */ - str lr, [sp, #-4]! @ 1 -UNWIND( .fnend ) -UNWIND( .fnstart ) -UNWIND( .save {lr} ) - mov ip, r2 @ 1 - mov lr, r2 @ 1 - -3: subs r1, r1, #64 @ 1 write 32 bytes out per loop - stmgeia r0!, {r2, r3, ip, lr} @ 4 - stmgeia r0!, {r2, r3, ip, lr} @ 4 - stmgeia r0!, {r2, r3, ip, lr} @ 4 - stmgeia r0!, {r2, r3, ip, lr} @ 4 - bgt 3b @ 1 - ldmeqfd sp!, {pc} @ 1/2 quick exit -/* - * No need to correct the count; we're only testing bits from now on - */ - tst r1, #32 @ 1 - stmneia r0!, {r2, r3, ip, lr} @ 4 - stmneia r0!, {r2, r3, ip, lr} @ 4 - tst r1, #16 @ 1 16 bytes or more? - stmneia r0!, {r2, r3, ip, lr} @ 4 - ldr lr, [sp], #4 @ 1 -UNWIND( .fnend ) - -#else - -/* - * This version aligns the destination pointer in order to write - * whole cache lines at once. - */ - - stmfd sp!, {r4-r7, lr} -UNWIND( .fnend ) -UNWIND( .fnstart ) -UNWIND( .save {r4-r7, lr} ) - mov r4, r2 - mov r5, r2 - mov r6, r2 - mov r7, r2 - mov ip, r2 - mov lr, r2 - - cmp r1, #96 - andgts ip, r0, #31 - ble 3f - - rsb ip, ip, #32 - sub r1, r1, ip - movs ip, ip, lsl #(32 - 4) - stmcsia r0!, {r4, r5, r6, r7} - stmmiia r0!, {r4, r5} - movs ip, ip, lsl #2 - strcs r2, [r0], #4 - -3: subs r1, r1, #64 - stmgeia r0!, {r2-r7, ip, lr} - stmgeia r0!, {r2-r7, ip, lr} - bgt 3b - ldmeqfd sp!, {r4-r7, pc} - - tst r1, #32 - stmneia r0!, {r2-r7, ip, lr} - tst r1, #16 - stmneia r0!, {r4-r7} - ldmfd sp!, {r4-r7, lr} -UNWIND( .fnend ) - -#endif - -UNWIND( .fnstart ) -4: tst r1, #8 @ 1 8 bytes or more? - stmneia r0!, {r2, r3} @ 2 - tst r1, #4 @ 1 4 bytes or more? - strne r2, [r0], #4 @ 1 -/* - * When we get here, we've got less than 4 bytes to zero. We - * may have an unaligned pointer as well. - */ -5: tst r1, #2 @ 1 2 bytes or more? - strneb r2, [r0], #1 @ 1 - strneb r2, [r0], #1 @ 1 - tst r1, #1 @ 1 a byte left over - strneb r2, [r0], #1 @ 1 - ret lr @ 1 -UNWIND( .fnend ) -ENDPROC(__memzero) diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c index 07e3a86c6466..5f127d5f1045 100644 --- a/arch/arm/mach-bcm/brcmstb.c +++ b/arch/arm/mach-bcm/brcmstb.c @@ -14,7 +14,6 @@ #include <linux/init.h> #include <linux/irqchip.h> #include <linux/of_platform.h> -#include <linux/soc/brcmstb/brcmstb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -38,7 +37,6 @@ u32 brcmstb_uart_config[3] = { static void __init brcmstb_init_irq(void) { irqchip_init(); - brcmstb_biuctrl_init(); } static const char *const brcmstb_match[] __initconst = { diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index cbde0030c092..d898a94f6eae 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -798,11 +798,11 @@ static int da850_lcd_hw_init(void) { int status; - status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n"); + status = gpio_request(DA850_LCD_BL_PIN, "lcd bl"); if (status < 0) return status; - status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n"); + status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr"); if (status < 0) { gpio_free(DA850_LCD_BL_PIN); return status; diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 62e7bc3018f0..e457f299cd44 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -17,6 +17,7 @@ #include <linux/mtd/rawnand.h> #include <linux/i2c.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/clk.h> #include <linux/videodev2.h> #include <media/i2c/tvp514x.h> @@ -108,11 +109,20 @@ static struct platform_device davinci_nand_device = { }, }; +static struct gpiod_lookup_table i2c_recovery_gpiod_table = { + .dev_id = "i2c_davinci", + .table = { + GPIO_LOOKUP("davinci_gpio", 15, "sda", + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP("davinci_gpio", 14, "scl", + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + }, +}; + static struct davinci_i2c_platform_data i2c_pdata = { .bus_freq = 400 /* kHz */, .bus_delay = 0 /* usec */, - .sda_pin = 15, - .scl_pin = 14, + .gpio_recovery = true, }; static int dm355evm_mmc_gpios = -EINVAL; @@ -141,6 +151,7 @@ static struct i2c_board_info dm355evm_i2c_info[] = { static void __init evm_init_i2c(void) { + gpiod_add_lookup_table(&i2c_recovery_gpiod_table); davinci_init_i2c(&i2c_pdata); gpio_request(5, "dm355evm_msp"); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index b07c9b18d427..85e6fb33b1ee 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -13,6 +13,7 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/i2c.h> #include <linux/platform_data/pcf857x.h> #include <linux/platform_data/at24.h> @@ -595,18 +596,28 @@ static struct i2c_board_info __initdata i2c_info[] = { }, }; +static struct gpiod_lookup_table i2c_recovery_gpiod_table = { + .dev_id = "i2c_davinci", + .table = { + GPIO_LOOKUP("davinci_gpio", 44, "sda", + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP("davinci_gpio", 43, "scl", + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + }, +}; + /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), * which requires 100 usec of idle bus after i2c writes sent to it. */ static struct davinci_i2c_platform_data i2c_pdata = { .bus_freq = 20 /* kHz */, .bus_delay = 100 /* usec */, - .sda_pin = 44, - .scl_pin = 43, + .gpio_recovery = true, }; static void __init evm_init_i2c(void) { + gpiod_add_lookup_table(&i2c_recovery_gpiod_table); davinci_init_i2c(&i2c_pdata); i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 0c02aaad0539..4da210a1a110 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -128,7 +128,7 @@ static struct platform_device davinci_fb_device = { .num_resources = 0, }; -static struct gpio_led ntosd2_leds[] = { +static const struct gpio_led ntosd2_leds[] = { { .name = "led1_green", .gpio = GPIO(10), }, { .name = "led1_red", .gpio = GPIO(11), }, { .name = "led2_green", .gpio = GPIO(12), }, diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 9f9fbfa6da0d..bcb6a7ba84e9 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -77,7 +77,7 @@ static int __init davinci_init_id(struct davinci_soc_info *soc_info) return -EINVAL; } -void __init davinci_common_init(struct davinci_soc_info *soc_info) +void __init davinci_common_init(const struct davinci_soc_info *soc_info) { int ret; diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index bd88470f3e5c..57ab18cf2a89 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -417,7 +417,7 @@ static struct clk_lookup da830_clks[] = { CLK("davinci-mcasp.0", NULL, &mcasp0_clk), CLK("davinci-mcasp.1", NULL, &mcasp1_clk), CLK("davinci-mcasp.2", NULL, &mcasp2_clk), - CLK("musb-da8xx", "usb20", &usb20_clk), + CLK("musb-da8xx", NULL, &usb20_clk), CLK("cppi41-dmaengine", NULL, &cppi41_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, "aintc", &aintc_clk), @@ -426,7 +426,7 @@ static struct clk_lookup da830_clks[] = { CLK("davinci_mdio.0", "fck", &emac_clk), CLK(NULL, "gpio", &gpio_clk), CLK("i2c_davinci.2", NULL, &i2c1_clk), - CLK("ohci-da8xx", "usb11", &usb11_clk), + CLK("ohci-da8xx", NULL, &usb11_clk), CLK(NULL, "emif3", &emif3_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "rmii", &rmii_clk), @@ -1194,7 +1194,7 @@ static struct davinci_timer_info da830_timer_info = { .clocksource_id = T0_BOT, }; -static struct davinci_soc_info davinci_soc_info_da830 = { +static const struct davinci_soc_info davinci_soc_info_da830 = { .io_desc = da830_io_desc, .io_desc_num = ARRAY_SIZE(da830_io_desc), .jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG, diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 07d6f0eb8c82..aa37cbdf7d4d 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -563,8 +563,8 @@ static struct clk_lookup da850_clks[] = { CLK("da830-mmc.1", NULL, &mmcsd1_clk), CLK("ti-aemif", NULL, &aemif_clk), CLK("davinci-nand.0", "aemif", &aemif_nand_clk), - CLK("ohci-da8xx", "usb11", &usb11_clk), - CLK("musb-da8xx", "usb20", &usb20_clk), + CLK("ohci-da8xx", NULL, &usb11_clk), + CLK("musb-da8xx", NULL, &usb20_clk), CLK("cppi41-dmaengine", NULL, &cppi41_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), @@ -1347,7 +1347,7 @@ int __init da850_register_gpio(void) return da8xx_register_gpio(&da850_gpio_platform_data); } -static struct davinci_soc_info davinci_soc_info_da850 = { +static const struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, .io_desc_num = ARRAY_SIZE(da850_io_desc), .jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG, diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 22440c05d66a..e1c40e73d30a 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -252,7 +252,7 @@ int __init da830_register_edma(struct edma_rsv_info *rsv) da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); edma_pdev = platform_device_register_full(&da8xx_edma0_device); - return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; + return PTR_ERR_OR_ZERO(edma_pdev); } static const struct dma_slave_map da850_edma0_map[] = { @@ -297,7 +297,7 @@ int __init da850_register_edma(struct edma_rsv_info *rsv[2]) da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map); edma_pdev = platform_device_register_full(&da850_edma1_device); - return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; + return PTR_ERR_OR_ZERO(edma_pdev); } static struct resource da8xx_i2c_resources0[] = { diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index bd50367f654e..938747f20c22 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -1006,7 +1006,7 @@ struct platform_device dm355_serial_device[] = { } }; -static struct davinci_soc_info davinci_soc_info_dm355 = { +static const struct davinci_soc_info davinci_soc_info_dm355 = { .io_desc = dm355_io_desc, .io_desc_num = ARRAY_SIZE(dm355_io_desc), .jtag_id_reg = 0x01c40028, diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 5ace9380626a..5d9f96df08e9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -1110,7 +1110,7 @@ struct platform_device dm365_serial_device[] = { } }; -static struct davinci_soc_info davinci_soc_info_dm365 = { +static const struct davinci_soc_info davinci_soc_info_dm365 = { .io_desc = dm365_io_desc, .io_desc_num = ARRAY_SIZE(dm365_io_desc), .jtag_id_reg = 0x01c40028, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index b437c3730f65..6b41e1ca511e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -899,7 +899,7 @@ struct platform_device dm644x_serial_device[] = { } }; -static struct davinci_soc_info davinci_soc_info_dm644x = { +static const struct davinci_soc_info davinci_soc_info_dm644x = { .io_desc = dm644x_io_desc, .io_desc_num = ARRAY_SIZE(dm644x_io_desc), .jtag_id_reg = 0x01c40028, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index da21353cac45..6fc06a6ad4f8 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -882,7 +882,7 @@ struct platform_device dm646x_serial_device[] = { } }; -static struct davinci_soc_info davinci_soc_info_dm646x = { +static const struct davinci_soc_info davinci_soc_info_dm646x = { .io_desc = dm646x_io_desc, .io_desc_num = ARRAY_SIZE(dm646x_io_desc), .jtag_id_reg = 0x01c40028, @@ -949,7 +949,7 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv) dm646x_edma_pdata.rsv = rsv; edma_pdev = platform_device_register_full(&dm646x_edma_device); - return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; + return PTR_ERR_OR_ZERO(edma_pdev); } void __init dm646x_init(void) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 037aa66bcac1..433a008ff796 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -79,7 +79,7 @@ struct davinci_soc_info { extern struct davinci_soc_info davinci_soc_info; -extern void davinci_common_init(struct davinci_soc_info *soc_info); +extern void davinci_common_init(const struct davinci_soc_info *soc_info); extern void davinci_init_ide(void); void davinci_restart(enum reboot_mode mode, const char *cmd); void davinci_init_late(void); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 61a75ca3684e..c095236d7ff8 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -21,6 +21,13 @@ config MACH_ADSSPHERE Say 'Y' here if you want your kernel to support the ADS Sphere board. +config MACH_BK3 + bool "Support Liebherr BK3.1" + select MACH_TS72XX + help + Say 'Y' here if you want your kernel to support the + Liebherr controller BK3.1. + config MACH_EDB93XX bool diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index f386ebae0163..c089a2a4fe30 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -19,10 +19,15 @@ #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/spi/mmc_spi.h> +#include <linux/mmc/host.h> #include <linux/platform_data/spi-ep93xx.h> #include <mach/gpio-ep93xx.h> #include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -31,6 +36,9 @@ #include "soc.h" #include "ts72xx.h" +/************************************************************************* + * IO map + *************************************************************************/ static struct map_desc ts72xx_io_desc[] __initdata = { { .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE, @@ -47,6 +55,11 @@ static struct map_desc ts72xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), .length = TS72XX_OPTIONS2_SIZE, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE), + .length = TS72XX_CPLDVER_SIZE, + .type = MT_DEVICE, } }; @@ -123,8 +136,6 @@ static struct platform_nand_data ts72xx_nand_data = { .nr_chips = 1, .chip_offset = 0, .chip_delay = 15, - .partitions = ts72xx_nand_parts, - .nr_partitions = ARRAY_SIZE(ts72xx_nand_parts), }, .ctrl = { .cmd_ctrl = ts72xx_nand_hwcontrol, @@ -148,8 +159,8 @@ static struct platform_device ts72xx_nand_flash = { .num_resources = ARRAY_SIZE(ts72xx_nand_resource), }; - -static void __init ts72xx_register_flash(void) +void __init ts72xx_register_flash(struct mtd_partition *parts, int n, + resource_size_t start) { /* * TS7200 has NOR flash all other TS72xx board have NAND flash. @@ -157,16 +168,12 @@ static void __init ts72xx_register_flash(void) if (board_is_ts7200()) { ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); } else { - resource_size_t start; - - if (is_ts9420_installed()) - start = EP93XX_CS7_PHYS_BASE; - else - start = EP93XX_CS6_PHYS_BASE; - ts72xx_nand_resource[0].start = start; ts72xx_nand_resource[0].end = start + SZ_16M - 1; + ts72xx_nand_data.chip.partitions = parts; + ts72xx_nand_data.chip.nr_partitions = n; + platform_device_register(&ts72xx_nand_flash); } } @@ -207,10 +214,79 @@ static struct platform_device ts72xx_wdt_device = { .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), }; +/************************************************************************* + * ETH + *************************************************************************/ static struct ep93xx_eth_data __initdata ts72xx_eth_data = { .phy_id = 1, }; +/************************************************************************* + * SPI SD/MMC host + *************************************************************************/ +#define BK3_EN_SDCARD_PHYS_BASE 0x12400000 +#define BK3_EN_SDCARD_PWR 0x0 +#define BK3_DIS_SDCARD_PWR 0x0C +static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd) +{ + void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K); + + if (!pwr_sd) { + pr_err("Failed to enable SD card power!"); + return; + } + + pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__, + !!vdd ? "ON" : "OFF", vdd); + + if (!!vdd) + __raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd); + else + __raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd); + + iounmap(pwr_sd); +} + +static struct mmc_spi_platform_data bk3_spi_mmc_data = { + .detect_delay = 500, + .powerup_msecs = 100, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .caps = MMC_CAP_NONREMOVABLE, + .setpower = bk3_mmc_spi_setpower, +}; + +/************************************************************************* + * SPI Bus - SD card access + *************************************************************************/ +static struct spi_board_info bk3_spi_board_info[] __initdata = { + { + .modalias = "mmc_spi", + .platform_data = &bk3_spi_mmc_data, + .max_speed_hz = 7.4E6, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +/* + * This is a stub -> the FGPIO[3] pin is not connected on the schematic + * The all work is performed automatically by !SPI_FRAME (SFRM1) and + * goes through CPLD + */ +static int bk3_spi_chipselects[] __initdata = { + EP93XX_GPIO_LINE_F(3), +}; + +static struct ep93xx_spi_info bk3_spi_master __initdata = { + .chipselect = bk3_spi_chipselects, + .num_chipselect = ARRAY_SIZE(bk3_spi_chipselects), + .use_dma = 1, +}; + +/************************************************************************* + * TS72XX support code + *************************************************************************/ #if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) /* Relative to EP93XX_CS1_PHYS_BASE */ @@ -257,7 +333,9 @@ static struct ep93xx_spi_info ts72xx_spi_info __initdata = { static void __init ts72xx_init_machine(void) { ep93xx_init_devices(); - ts72xx_register_flash(); + ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts), + is_ts9420_installed() ? + EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE); platform_device_register(&ts72xx_rtc_device); platform_device_register(&ts72xx_wdt_device); @@ -280,3 +358,66 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END + +/************************************************************************* + * EP93xx I2S audio peripheral handling + *************************************************************************/ +static struct resource ep93xx_i2s_resource[] = { + DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), + DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"), +}; + +static struct platform_device ep93xx_i2s_device = { + .name = "ep93xx-spilink-i2s", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), + .resource = ep93xx_i2s_resource, +}; + +/************************************************************************* + * BK3 support code + *************************************************************************/ +static struct mtd_partition bk3_nand_parts[] = { + { + .name = "System", + .offset = 0x00000000, + .size = 0x01e00000, + }, { + .name = "Data", + .offset = 0x01e00000, + .size = 0x05f20000 + }, { + .name = "RedBoot", + .offset = 0x07d20000, + .size = 0x002e0000, + .mask_flags = MTD_WRITEABLE, /* force RO */ + }, +}; + +static void __init bk3_init_machine(void) +{ + ep93xx_init_devices(); + + ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts), + EP93XX_CS6_PHYS_BASE); + + ep93xx_register_eth(&ts72xx_eth_data, 1); + + ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info, + ARRAY_SIZE(bk3_spi_board_info)); + + /* Configure ep93xx's I2S to use AC97 pins */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); + platform_device_register(&ep93xx_i2s_device); +} + +MACHINE_START(BK3, "Liebherr controller BK3.1") + /* Maintainer: Lukasz Majewski <lukma@denx.de> */ + .atag_offset = 0x100, + .map_io = ts72xx_map_io, + .init_irq = ep93xx_init_irq, + .init_time = ep93xx_timer_init, + .init_machine = bk3_init_machine, + .init_late = ep93xx_init_late, + .restart = ep93xx_restart, +MACHINE_END diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h index 8a3206a54b39..00b4941d29c9 100644 --- a/arch/arm/mach-ep93xx/ts72xx.h +++ b/arch/arm/mach-ep93xx/ts72xx.h @@ -10,8 +10,12 @@ * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 + * febfc000 23400000 4K CPLD version register */ +#ifndef __TS72XX_H_ +#define __TS72XX_H_ + #define TS72XX_MODEL_PHYS_BASE 0x22000000 #define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000) #define TS72XX_MODEL_SIZE 0x00001000 @@ -39,6 +43,10 @@ #define TS72XX_OPTIONS2_TS9420 0x04 #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 +#define TS72XX_CPLDVER_PHYS_BASE 0x23400000 +#define TS72XX_CPLDVER_VIRT_BASE IOMEM(0xfebfc000) +#define TS72XX_CPLDVER_SIZE 0x00001000 + #ifndef __ASSEMBLY__ static inline int ts72xx_model(void) @@ -83,3 +91,4 @@ static inline int is_ts9420_installed(void) TS72XX_OPTIONS2_TS9420); } #endif +#endif /* __TS72XX_H_ */ diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 44fa753bd79c..647c319f9f5f 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -1,9 +1,7 @@ -# arch/arm/mach-exynos/Kconfig +# SPDX-License-Identifier: GPL-2.0 # # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. # http://www.samsung.com/ -# -# Licensed under GPLv2 # Configuration options for the EXYNOS diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 9ea6c54645ad..cd00c82a1add 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -1,9 +1,7 @@ -# arch/arm/mach-exynos/Makefile +# SPDX-License-Identifier: GPL-2.0 # # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. # http://www.samsung.com/ -# -# Licensed under GPLv2 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 3f715524c9d6..098f84a149a3 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Common Header for EXYNOS machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H diff --git a/arch/arm/mach-exynos/exynos-smc.S b/arch/arm/mach-exynos/exynos-smc.S index 2e27aa3813fd..d259532ba937 100644 --- a/arch/arm/mach-exynos/exynos-smc.S +++ b/arch/arm/mach-exynos/exynos-smc.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2012 Samsung Electronics. * * Copied from omap-smc.S Copyright (C) 2010 Texas Instruments, Inc. - * - * This program is free software,you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 9a9caac1125a..fbd108ce8745 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -1,13 +1,9 @@ -/* - * SAMSUNG EXYNOS Flattened Device Tree enabled machine - * - * Copyright (c) 2010-2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// SAMSUNG EXYNOS Flattened Device Tree enabled machine +// +// Copyright (c) 2010-2014 Samsung Electronics Co., Ltd. +// http://www.samsung.com #include <linux/init.h> #include <linux/io.h> diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 2a51e4603a6f..be1f20fe28f4 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -1,12 +1,8 @@ -/* - * Copyright (C) 2012 Samsung Electronics. - * Kyungmin Park <kyungmin.park@samsung.com> - * Tomasz Figa <t.figa@samsung.com> - * - * This program is free software,you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2012 Samsung Electronics. +// Kyungmin Park <kyungmin.park@samsung.com> +// Tomasz Figa <t.figa@samsung.com> #include <linux/kernel.h> #include <linux/io.h> diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S index d3d24ab351ae..005695c9bf40 100644 --- a/arch/arm/mach-exynos/headsmp.S +++ b/arch/arm/mach-exynos/headsmp.S @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* - * * Cloned from linux/arch/arm/mach-realview/headsmp.S * * Copyright (c) 2003 ARM Limited * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 5fb0040cc6d3..37a5ea5e2602 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * EXYNOS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H __FILE__ diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index b42622562ea7..72bc035bedbe 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -1,15 +1,8 @@ -/* - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * arch/arm/mach-exynos/mcpm-exynos.c - * - * Based on arch/arm/mach-vexpress/dcscb.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2014 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// Based on arch/arm/mach-vexpress/dcscb.c #include <linux/arm-cci.h> #include <linux/delay.h> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 5a03bffe7226..5156fe70e030 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -1,16 +1,11 @@ - /* - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Cloned from linux/arch/arm/mach-vexpress/platsmp.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// Cloned from linux/arch/arm/mach-vexpress/platsmp.c +// +// Copyright (C) 2002 ARM Ltd. +// All Rights Reserved #include <linux/init.h> #include <linux/errno.h> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index c9740d96db9e..dc4346ecf16d 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -1,17 +1,13 @@ -/* - * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - Power Management support - * - * Based on arch/arm/mach-s3c2410/pm.c - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// EXYNOS - Power Management support +// +// Based on arch/arm/mach-s3c2410/pm.c +// Copyright (c) 2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> #include <linux/init.h> #include <linux/suspend.h> diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index 4292cae43f3c..2783c3a0c06a 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -1,18 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Exynos low-level resume code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h index c2845717bc8f..f355185d4239 100644 --- a/arch/arm/mach-exynos/smc.h +++ b/arch/arm/mach-exynos/smc.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2012 Samsung Electronics. * * EXYNOS - SMC Call - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_EXYNOS_SMC_H diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 370d37ded7e7..c2ed997fedef 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -1,17 +1,13 @@ -/* - * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - Suspend support - * - * Based on arch/arm/mach-s3c2410/pm.c - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// EXYNOS - Suspend support +// +// Based on arch/arm/mach-s3c2410/pm.c +// Copyright (c) 2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> #include <linux/init.h> #include <linux/suspend.h> diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index b09a2ec19267..c8d68e918b2f 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -71,15 +71,6 @@ enum mxc_cpu_pwr_mode { STOP_POWER_OFF, /* STOP + SRPG */ }; -enum mx3_cpu_pwr_mode { - MX3_RUN, - MX3_WAIT, - MX3_DOZE, - MX3_SLEEP, -}; - -void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); - void imx_enable_cpu(int cpu, bool enable); void imx_set_cpu_jump(int cpu, void *jump_addr); u32 imx_get_cpu_arg(int cpu); diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index 78262899a590..5fb1d2254b5e 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -547,7 +547,6 @@ static int imx_mmdc_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; void __iomem *mmdc_base, *reg; u32 val; - int timeout = 0x400; mmdc_base = of_iomap(np, 0); WARN_ON(!mmdc_base); @@ -565,16 +564,6 @@ static int imx_mmdc_probe(struct platform_device *pdev) val &= ~(1 << BP_MMDC_MAPSR_PSD); writel_relaxed(val, reg); - /* Ensure it's successfully enabled */ - while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) { - pr_warn("%s: failed to enable automatic power saving\n", - __func__); - return -EBUSY; - } - return imx_mmdc_perf_init(pdev, mmdc_base); } diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 731fb2019ecb..2c03d2f6b647 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -16,6 +16,7 @@ #include <linux/serial_8250.h> #include <linux/io.h> #include <linux/w1-gpio.h> +#include <linux/gpio/machine.h> #include <linux/mtd/plat-ram.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -162,9 +163,16 @@ static struct platform_device vulcan_max6369 = { .num_resources = 1, }; +static struct gpiod_lookup_table vulcan_w1_gpiod_table = { + .dev_id = "w1-gpio", + .table = { + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", 14, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + }, +}; + static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { - .pin = 14, - .ext_pullup_enable_pin = -EINVAL, + /* Intentionally left blank */ }; static struct platform_device vulcan_w1_gpio = { @@ -233,6 +241,7 @@ static void __init vulcan_init(void) IXP4XX_EXP_BUS_WR_EN | IXP4XX_EXP_BUS_BYTE_EN; + gpiod_add_lookup_table(&vulcan_w1_gpiod_table); platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices)); } diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index 70e49d54434e..91cc461f7b04 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -1,5 +1,5 @@ menuconfig ARCH_MEDIATEK - bool "Mediatek MT65xx & MT81xx SoC" + bool "MediaTek SoC Support" depends on ARCH_MULTI_V7 select ARM_GIC select PINCTRL diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index aff6164b2083..d90f61e6254f 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -23,6 +23,7 @@ config MACH_MESON8 default ARCH_MESON select MESON6_TIMER select COMMON_CLK_MESON8B + select MESON_IRQ_GPIO config MACH_MESON8B bool "Amlogic Meson8b SoCs support" diff --git a/arch/arm/mach-mmp/mmp2.h b/arch/arm/mach-mmp/mmp2.h index a4b82f719de1..adafc4fba8f4 100644 --- a/arch/arm/mach-mmp/mmp2.h +++ b/arch/arm/mach-mmp/mmp2.h @@ -10,7 +10,7 @@ extern void __init mmp2_init_irq(void); extern void mmp2_clear_pmic_int(void); #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/dma-mmp_tdma.h> #include "devices.h" diff --git a/arch/arm/mach-mmp/pxa168.h b/arch/arm/mach-mmp/pxa168.h index b39bff37ff11..0331c58b07a2 100644 --- a/arch/arm/mach-mmp/pxa168.h +++ b/arch/arm/mach-mmp/pxa168.h @@ -11,7 +11,7 @@ extern void pxa168_restart(enum reboot_mode, const char *); extern void pxa168_clear_keypad_wakeup(void); #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> #include <video/pxa168fb.h> #include <linux/platform_data/keypad-pxa27x.h> diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h index cb3923dcf580..42009c349eae 100644 --- a/arch/arm/mach-mmp/pxa910.h +++ b/arch/arm/mach-mmp/pxa910.h @@ -7,7 +7,7 @@ extern void __init icu_init_irq(void); extern void __init pxa910_init_irq(void); #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> #include <video/mmp_disp.h> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 9b49867154bf..6b32dc527edc 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -10,7 +10,6 @@ menuconfig ARCH_MVEBU select ZONE_DMA if ARM_LPAE select GPIOLIB select PCI_QUIRKS if PCI - select OF_ADDRESS_PCI if ARCH_MVEBU diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 518926410b62..b79b1ca9aee9 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -1224,14 +1224,6 @@ ccd_exit: return 0; } -u32 clkdm_xlate_address(struct clockdomain *clkdm) -{ - if (arch_clkdm->clkdm_xlate_address) - return arch_clkdm->clkdm_xlate_address(clkdm); - - return 0; -} - /** * clkdm_hwmod_enable - add an enabled downstream hwmod to this clkdm * @clkdm: struct clockdomain * diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 827f01e2d0af..24667a5a9dc0 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -175,7 +175,6 @@ struct clkdm_ops { void (*clkdm_deny_idle)(struct clockdomain *clkdm); int (*clkdm_clk_enable)(struct clockdomain *clkdm); int (*clkdm_clk_disable)(struct clockdomain *clkdm); - u32 (*clkdm_xlate_address)(struct clockdomain *clkdm); }; int clkdm_register_platform_funcs(struct clkdm_ops *co); @@ -214,7 +213,6 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh); int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh); -u32 clkdm_xlate_address(struct clockdomain *clkdm); extern void __init omap242x_clockdomains_init(void); extern void __init omap243x_clockdomains_init(void); diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index d7a5d11cbcbf..9ff0fc70f152 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -14,38 +14,8 @@ * published by the Free Software Foundation. */ -#define OMAP24XX_EN_CAM_SHIFT 31 -#define OMAP24XX_EN_WDT4_SHIFT 29 -#define OMAP2420_EN_WDT3_SHIFT 28 -#define OMAP24XX_EN_MSPRO_SHIFT 27 -#define OMAP24XX_EN_FAC_SHIFT 25 -#define OMAP2420_EN_EAC_SHIFT 24 -#define OMAP24XX_EN_HDQ_SHIFT 23 -#define OMAP2420_EN_I2C2_SHIFT 20 -#define OMAP2420_EN_I2C1_SHIFT 19 -#define OMAP2430_EN_MCBSP5_SHIFT 5 -#define OMAP2430_EN_MCBSP4_SHIFT 4 -#define OMAP2430_EN_MCBSP3_SHIFT 3 -#define OMAP24XX_EN_SSI_SHIFT 1 -#define OMAP24XX_EN_MPU_WDT_SHIFT 3 -#define OMAP24XX_CLKSEL_MPU_SHIFT 0 -#define OMAP24XX_CLKSEL_MPU_WIDTH 5 #define OMAP24XX_AUTOSTATE_MPU_MASK (1 << 0) -#define OMAP24XX_EN_TV_SHIFT 2 -#define OMAP24XX_EN_DSS2_SHIFT 1 -#define OMAP24XX_EN_DSS1_SHIFT 0 #define OMAP24XX_EN_DSS1_MASK (1 << 0) -#define OMAP2430_EN_I2CHS2_SHIFT 20 -#define OMAP2430_EN_I2CHS1_SHIFT 19 -#define OMAP2430_EN_MMCHSDB2_SHIFT 17 -#define OMAP2430_EN_MMCHSDB1_SHIFT 16 -#define OMAP24XX_EN_MAILBOXES_SHIFT 30 -#define OMAP2430_EN_SDRC_SHIFT 2 -#define OMAP24XX_EN_PKA_SHIFT 4 -#define OMAP24XX_EN_AES_SHIFT 3 -#define OMAP24XX_EN_RNG_SHIFT 2 -#define OMAP24XX_EN_SHA_SHIFT 1 -#define OMAP24XX_EN_DES_SHIFT 0 #define OMAP24XX_ST_MAILBOXES_SHIFT 30 #define OMAP24XX_ST_HDQ_SHIFT 23 #define OMAP2420_ST_I2C2_SHIFT 20 @@ -54,81 +24,30 @@ #define OMAP2430_ST_I2CHS2_SHIFT 20 #define OMAP24XX_ST_MCBSP2_SHIFT 16 #define OMAP24XX_ST_MCBSP1_SHIFT 15 -#define OMAP24XX_ST_DSS_SHIFT 0 #define OMAP2430_ST_MCBSP5_SHIFT 5 #define OMAP2430_ST_MCBSP4_SHIFT 4 #define OMAP2430_ST_MCBSP3_SHIFT 3 #define OMAP24XX_ST_AES_SHIFT 3 #define OMAP24XX_ST_RNG_SHIFT 2 #define OMAP24XX_ST_SHA_SHIFT 1 -#define OMAP24XX_AUTO_SDRC_SHIFT 2 -#define OMAP24XX_AUTO_GPMC_SHIFT 1 -#define OMAP24XX_AUTO_SDMA_SHIFT 0 -#define OMAP24XX_CLKSEL_USB_MASK (0x7 << 25) -#define OMAP24XX_CLKSEL_SSI_MASK (0x1f << 20) -#define OMAP2420_CLKSEL_VLYNQ_MASK (0x1f << 15) #define OMAP24XX_CLKSEL_DSS2_MASK (0x1 << 13) -#define OMAP24XX_CLKSEL_DSS1_MASK (0x1f << 8) -#define OMAP24XX_CLKSEL_L4_SHIFT 5 -#define OMAP24XX_CLKSEL_L4_WIDTH 2 -#define OMAP24XX_CLKSEL_L3_SHIFT 0 -#define OMAP24XX_CLKSEL_L3_WIDTH 5 -#define OMAP24XX_CLKSEL_GPT12_MASK (0x3 << 22) -#define OMAP24XX_CLKSEL_GPT11_MASK (0x3 << 20) -#define OMAP24XX_CLKSEL_GPT10_MASK (0x3 << 18) -#define OMAP24XX_CLKSEL_GPT9_MASK (0x3 << 16) -#define OMAP24XX_CLKSEL_GPT8_MASK (0x3 << 14) -#define OMAP24XX_CLKSEL_GPT7_MASK (0x3 << 12) -#define OMAP24XX_CLKSEL_GPT6_MASK (0x3 << 10) -#define OMAP24XX_CLKSEL_GPT5_MASK (0x3 << 8) -#define OMAP24XX_CLKSEL_GPT4_MASK (0x3 << 6) -#define OMAP24XX_CLKSEL_GPT3_MASK (0x3 << 4) -#define OMAP24XX_CLKSEL_GPT2_MASK (0x3 << 2) #define OMAP24XX_AUTOSTATE_DSS_MASK (1 << 2) #define OMAP24XX_AUTOSTATE_L4_MASK (1 << 1) #define OMAP24XX_AUTOSTATE_L3_MASK (1 << 0) -#define OMAP24XX_EN_3D_SHIFT 2 -#define OMAP24XX_EN_2D_SHIFT 1 #define OMAP24XX_AUTOSTATE_GFX_MASK (1 << 0) -#define OMAP2430_EN_ICR_SHIFT 6 -#define OMAP24XX_EN_OMAPCTRL_SHIFT 5 -#define OMAP24XX_EN_WDT1_SHIFT 4 -#define OMAP24XX_EN_32KSYNC_SHIFT 1 #define OMAP24XX_ST_MPU_WDT_SHIFT 3 #define OMAP24XX_ST_32KSYNC_SHIFT 1 -#define OMAP24XX_CLKSEL_GPT1_MASK (0x3 << 0) #define OMAP24XX_EN_54M_PLL_SHIFT 6 #define OMAP24XX_EN_96M_PLL_SHIFT 2 -#define OMAP24XX_EN_DPLL_MASK (0x3 << 0) #define OMAP24XX_ST_54M_APLL_SHIFT 9 #define OMAP24XX_ST_96M_APLL_SHIFT 8 #define OMAP24XX_AUTO_54M_MASK (0x3 << 6) #define OMAP24XX_AUTO_96M_MASK (0x3 << 2) #define OMAP24XX_AUTO_DPLL_SHIFT 0 #define OMAP24XX_AUTO_DPLL_MASK (0x3 << 0) -#define OMAP24XX_APLLS_CLKIN_SHIFT 23 -#define OMAP24XX_APLLS_CLKIN_WIDTH 3 -#define OMAP24XX_APLLS_CLKIN_MASK (0x7 << 23) -#define OMAP24XX_DPLL_MULT_MASK (0x3ff << 12) -#define OMAP24XX_DPLL_DIV_MASK (0xf << 8) -#define OMAP24XX_54M_SOURCE_SHIFT 5 -#define OMAP24XX_54M_SOURCE_WIDTH 1 -#define OMAP2430_96M_SOURCE_SHIFT 4 -#define OMAP2430_96M_SOURCE_WIDTH 1 -#define OMAP24XX_48M_SOURCE_MASK (1 << 3) #define OMAP24XX_CORE_CLK_SRC_MASK (0x3 << 0) -#define OMAP2420_EN_IVA_COP_SHIFT 10 -#define OMAP2420_EN_IVA_MPU_SHIFT 8 -#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT 0 -#define OMAP2420_EN_DSP_IPI_SHIFT 1 -#define OMAP2420_CLKSEL_IVA_MASK (0x1f << 8) -#define OMAP24XX_CLKSEL_DSP_IF_MASK (0x3 << 5) -#define OMAP24XX_CLKSEL_DSP_MASK (0x1f << 0) #define OMAP2420_AUTOSTATE_IVA_MASK (1 << 8) #define OMAP24XX_AUTOSTATE_DSP_MASK (1 << 0) -#define OMAP2430_EN_OSC_SHIFT 1 -#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT 0 -#define OMAP2430_CLKSEL_MDM_MASK (0xf << 0) #define OMAP2430_AUTOSTATE_MDM_MASK (1 << 0) #define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0 #define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1 diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index ee6c784cd6b7..38656ce2432c 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -14,68 +14,11 @@ * published by the Free Software Foundation. */ -#define OMAP3430ES2_EN_MMC3_SHIFT 30 -#define OMAP3430_EN_MSPRO_SHIFT 23 -#define OMAP3430_EN_HDQ_SHIFT 22 -#define OMAP3430ES1_EN_FSHOSTUSB_SHIFT 5 -#define OMAP3430ES1_EN_D2D_SHIFT 3 -#define OMAP3430_EN_SSI_SHIFT 0 -#define OMAP3430ES2_EN_USBTLL_SHIFT 2 -#define OMAP3430_EN_WDT2_SHIFT 5 -#define OMAP3430_EN_CAM_SHIFT 0 -#define OMAP3430_EN_WDT3_SHIFT 12 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0) -#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0 -#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4 -#define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4) -#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3 -#define OMAP3430_EN_IVA2_DPLL_SHIFT 0 -#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_ST_IVA2_SHIFT 0 -#define OMAP3430_ST_IVA2_CLK_MASK (1 << 0) -#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0 -#define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0) -#define OMAP3430_IVA2_CLK_SRC_SHIFT 19 -#define OMAP3430_IVA2_CLK_SRC_WIDTH 3 -#define OMAP3430_IVA2_DPLL_MULT_MASK (0x7ff << 8) -#define OMAP3430_IVA2_DPLL_DIV_MASK (0x7f << 0) -#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT 0 -#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_WIDTH 5 #define OMAP3430_CLKTRCTRL_IVA2_MASK (0x3 << 0) #define OMAP3430_CLKACTIVITY_IVA2_MASK (1 << 0) -#define OMAP3430_MPU_DPLL_FREQSEL_MASK (0xf << 4) -#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT 3 -#define OMAP3430_EN_MPU_DPLL_MASK (0x7 << 0) -#define OMAP3430_ST_MPU_CLK_SHIFT 0 -#define OMAP3430_ST_MPU_CLK_MASK (1 << 0) -#define OMAP3430_ST_MPU_CLK_WIDTH 1 -#define OMAP3430_AUTO_MPU_DPLL_MASK (0x7 << 0) -#define OMAP3430_MPU_CLK_SRC_SHIFT 19 -#define OMAP3430_MPU_CLK_SRC_WIDTH 3 -#define OMAP3430_MPU_DPLL_MULT_MASK (0x7ff << 8) -#define OMAP3430_MPU_DPLL_DIV_MASK (0x7f << 0) -#define OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT 0 -#define OMAP3430_MPU_DPLL_CLKOUT_DIV_WIDTH 5 #define OMAP3430_CLKTRCTRL_MPU_MASK (0x3 << 0) -#define OMAP3430_EN_MODEM_SHIFT 31 -#define OMAP3430_EN_ICR_SHIFT 29 -#define OMAP3430_EN_AES2_SHIFT 28 -#define OMAP3430_EN_SHA12_SHIFT 27 -#define OMAP3430_EN_DES2_SHIFT 26 -#define OMAP3430ES1_EN_FAC_SHIFT 8 -#define OMAP3430_EN_MAILBOXES_SHIFT 7 -#define OMAP3430_EN_OMAPCTRL_SHIFT 6 -#define OMAP3430_EN_SAD2D_SHIFT 3 -#define OMAP3430_EN_SDRC_SHIFT 1 -#define AM35XX_EN_IPSS_SHIFT 4 -#define OMAP3430_EN_PKA_SHIFT 4 -#define OMAP3430_EN_AES1_SHIFT 3 -#define OMAP3430_EN_RNG_SHIFT 2 -#define OMAP3430_EN_SHA11_SHIFT 1 -#define OMAP3430_EN_DES1_SHIFT 0 -#define OMAP3430_EN_MAD2D_SHIFT 3 -#define OMAP3430ES2_EN_TS_SHIFT 1 -#define OMAP3430ES2_EN_CPEFUSE_SHIFT 0 #define OMAP3430_ST_AES2_SHIFT 28 #define OMAP3430_ST_SHA12_SHIFT 27 #define AM35XX_ST_UART4_SHIFT 23 @@ -84,131 +27,26 @@ #define OMAP3430_ST_MAILBOXES_SHIFT 7 #define OMAP3430_ST_SAD2D_SHIFT 3 #define OMAP3430_ST_SDMA_SHIFT 2 -#define AM35XX_ST_IPSS_SHIFT 5 #define OMAP3430ES2_ST_USBTLL_SHIFT 2 -#define OMAP3430_CLKSEL_SSI_MASK (0xf << 8) -#define OMAP3430_CLKSEL_GPT11_MASK (1 << 7) -#define OMAP3430_CLKSEL_GPT10_MASK (1 << 6) -#define OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK (0x3 << 4) -#define OMAP3430_CLKSEL_L4_SHIFT 2 -#define OMAP3430_CLKSEL_L4_WIDTH 2 -#define OMAP3430_CLKSEL_L3_SHIFT 0 -#define OMAP3430_CLKSEL_L3_WIDTH 2 -#define OMAP3630_CLKSEL_96M_MASK (0x3 << 12) #define OMAP3430ES1_CLKTRCTRL_D2D_MASK (0x3 << 4) #define OMAP3430_CLKTRCTRL_L4_MASK (0x3 << 2) #define OMAP3430_CLKTRCTRL_L3_MASK (0x3 << 0) -#define OMAP3430ES1_EN_3D_SHIFT 2 -#define OMAP3430ES1_EN_2D_SHIFT 1 #define OMAP3430ES1_CLKTRCTRL_GFX_MASK (0x3 << 0) -#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT 1 -#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT 0 -#define OMAP3430ES2_CLKSEL_SGX_MASK (0x7 << 0) #define OMAP3430ES2_CLKTRCTRL_SGX_MASK (0x3 << 0) -#define OMAP3430ES2_EN_USIMOCP_SHIFT 9 -#define OMAP3430_EN_WDT1_SHIFT 4 -#define OMAP3430_EN_32KSYNC_SHIFT 2 #define OMAP3430_ST_WDT2_SHIFT 5 #define OMAP3430_ST_32KSYNC_SHIFT 2 -#define OMAP3430ES2_CLKSEL_USIMOCP_MASK (0xf << 3) -#define OMAP3430_CLKSEL_RM_SHIFT 1 -#define OMAP3430_CLKSEL_RM_WIDTH 2 -#define OMAP3430_CLKSEL_GPT1_MASK (1 << 0) -#define OMAP3430_PWRDN_EMU_PERIPH_SHIFT 31 -#define OMAP3430_PWRDN_CAM_SHIFT 30 -#define OMAP3430_PWRDN_DSS1_SHIFT 29 -#define OMAP3430_PWRDN_TV_SHIFT 28 -#define OMAP3430_PWRDN_96M_SHIFT 27 -#define OMAP3430_PERIPH_DPLL_FREQSEL_MASK (0xf << 20) -#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT 19 -#define OMAP3430_EN_PERIPH_DPLL_MASK (0x7 << 16) -#define OMAP3430_PWRDN_EMU_CORE_SHIFT 12 -#define OMAP3430_CORE_DPLL_FREQSEL_MASK (0xf << 4) -#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT 3 -#define OMAP3430_EN_CORE_DPLL_MASK (0x7 << 0) -#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK (0xf << 4) -#define OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT 3 -#define OMAP3430ES2_EN_PERIPH2_DPLL_MASK (0x7 << 0) -#define OMAP3430_ST_PERIPH_CLK_MASK (1 << 1) -#define OMAP3430_ST_CORE_CLK_MASK (1 << 0) -#define OMAP3430ES2_ST_PERIPH2_CLK_MASK (1 << 0) #define OMAP3430_AUTO_PERIPH_DPLL_MASK (0x7 << 3) -#define OMAP3430_AUTO_CORE_DPLL_MASK (0x7 << 0) -#define OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK (0x7 << 0) -#define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT 27 -#define OMAP3430_CORE_DPLL_CLKOUT_DIV_WIDTH 5 -#define OMAP3430_CORE_DPLL_MULT_MASK (0x7ff << 16) -#define OMAP3430_CORE_DPLL_DIV_MASK (0x7f << 8) -#define OMAP3430_SOURCE_96M_SHIFT 6 -#define OMAP3430_SOURCE_96M_WIDTH 1 -#define OMAP3430_SOURCE_54M_SHIFT 5 -#define OMAP3430_SOURCE_54M_WIDTH 1 -#define OMAP3430_SOURCE_48M_MASK (1 << 3) -#define OMAP3430_PERIPH_DPLL_MULT_MASK (0x7ff << 8) -#define OMAP3630_PERIPH_DPLL_MULT_MASK (0xfff << 8) -#define OMAP3430_PERIPH_DPLL_DIV_MASK (0x7f << 0) -#define OMAP3630_PERIPH_DPLL_DCO_SEL_MASK (0x7 << 21) -#define OMAP3630_PERIPH_DPLL_SD_DIV_MASK (0xff << 24) -#define OMAP3430_DIV_96M_SHIFT 0 -#define OMAP3630_DIV_96M_WIDTH 6 -#define OMAP3430ES2_PERIPH2_DPLL_MULT_MASK (0x7ff << 8) -#define OMAP3430ES2_PERIPH2_DPLL_DIV_MASK (0x7f << 0) -#define OMAP3430ES2_DIV_120M_SHIFT 0 -#define OMAP3430ES2_DIV_120M_WIDTH 5 -#define OMAP3430_CLKOUT2_EN_SHIFT 7 -#define OMAP3430_CLKOUT2_DIV_SHIFT 3 -#define OMAP3430_CLKOUT2_DIV_WIDTH 3 -#define OMAP3430_CLKOUT2SOURCE_MASK (0x3 << 0) -#define OMAP3430_EN_TV_SHIFT 2 -#define OMAP3430_EN_DSS2_SHIFT 1 -#define OMAP3430_EN_DSS1_SHIFT 0 -#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT 0 #define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1 -#define OMAP3430ES2_ST_DSS_STDBY_SHIFT 0 -#define OMAP3430ES1_ST_DSS_SHIFT 0 -#define OMAP3430_CLKSEL_TV_SHIFT 8 -#define OMAP3630_CLKSEL_TV_WIDTH 6 -#define OMAP3430_CLKSEL_DSS1_SHIFT 0 -#define OMAP3630_CLKSEL_DSS1_WIDTH 6 #define OMAP3430_CLKTRCTRL_DSS_MASK (0x3 << 0) -#define OMAP3430_EN_CSI2_SHIFT 1 -#define OMAP3430_CLKSEL_CAM_SHIFT 0 -#define OMAP3630_CLKSEL_CAM_WIDTH 6 #define OMAP3430_CLKTRCTRL_CAM_MASK (0x3 << 0) #define OMAP3430_ST_MCBSP4_SHIFT 2 #define OMAP3430_ST_MCBSP3_SHIFT 1 #define OMAP3430_ST_MCBSP2_SHIFT 0 -#define OMAP3430_CLKSEL_GPT9_MASK (1 << 7) -#define OMAP3430_CLKSEL_GPT8_MASK (1 << 6) -#define OMAP3430_CLKSEL_GPT7_MASK (1 << 5) -#define OMAP3430_CLKSEL_GPT6_MASK (1 << 4) -#define OMAP3430_CLKSEL_GPT5_MASK (1 << 3) -#define OMAP3430_CLKSEL_GPT4_MASK (1 << 2) -#define OMAP3430_CLKSEL_GPT3_MASK (1 << 1) -#define OMAP3430_CLKSEL_GPT2_MASK (1 << 0) #define OMAP3430_CLKTRCTRL_PER_MASK (0x3 << 0) -#define OMAP3430_DIV_DPLL4_SHIFT 24 -#define OMAP3630_DIV_DPLL4_WIDTH 6 -#define OMAP3430_DIV_DPLL3_SHIFT 16 -#define OMAP3430_DIV_DPLL3_WIDTH 5 -#define OMAP3430_CLKSEL_TRACECLK_SHIFT 11 -#define OMAP3430_CLKSEL_TRACECLK_WIDTH 3 -#define OMAP3430_CLKSEL_PCLK_SHIFT 8 -#define OMAP3430_CLKSEL_PCLK_WIDTH 3 -#define OMAP3430_CLKSEL_PCLKX2_SHIFT 6 -#define OMAP3430_CLKSEL_PCLKX2_WIDTH 2 -#define OMAP3430_CLKSEL_ATCLK_SHIFT 4 -#define OMAP3430_CLKSEL_ATCLK_WIDTH 2 -#define OMAP3430_TRACE_MUX_CTRL_SHIFT 2 -#define OMAP3430_TRACE_MUX_CTRL_WIDTH 2 -#define OMAP3430_MUX_CTRL_MASK (0x3 << 0) #define OMAP3430_CLKTRCTRL_EMU_MASK (0x3 << 0) #define OMAP3430_CLKTRCTRL_NEON_MASK (0x3 << 0) #define OMAP3430ES2_EN_USBHOST2_SHIFT 1 -#define OMAP3430ES2_EN_USBHOST1_SHIFT 0 -#define OMAP3430ES2_EN_USBHOST_SHIFT 0 #define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT 1 -#define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT 0 #define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK (3 << 0) #define OMAP34XX_CLKSTCTRL_DISABLE_AUTO 0x0 #define OMAP34XX_CLKSTCTRL_FORCE_SLEEP 0x1 diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index e833984cc85e..b19e83d53501 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -52,6 +52,7 @@ extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2); * @wait_module_idle: ptr to the SoC CM-specific wait_module_idle impl * @module_enable: ptr to the SoC CM-specific module_enable impl * @module_disable: ptr to the SoC CM-specific module_disable impl + * @xlate_clkctrl: ptr to the SoC CM-specific clkctrl xlate addr impl */ struct cm_ll_data { int (*split_idlest_reg)(struct clk_omap_reg *idlest_reg, s16 *prcm_inst, @@ -62,6 +63,7 @@ struct cm_ll_data { u8 idlest_shift); void (*module_enable)(u8 mode, u8 part, u16 inst, u16 clkctrl_offs); void (*module_disable)(u8 part, u16 inst, u16 clkctrl_offs); + u32 (*xlate_clkctrl)(u8 part, u16 inst, u16 clkctrl_offs); }; extern int cm_split_idlest_reg(struct clk_omap_reg *idlest_reg, s16 *prcm_inst, @@ -72,8 +74,9 @@ int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg, u8 idlest_shift); int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs); int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs); -extern int cm_register(struct cm_ll_data *cld); -extern int cm_unregister(struct cm_ll_data *cld); +u32 omap_cm_xlate_clkctrl(u8 part, u16 inst, u16 clkctrl_offs); +extern int cm_register(const struct cm_ll_data *cld); +extern int cm_unregister(const struct cm_ll_data *cld); int omap_cm_init(void); int omap2_cm_base_init(void); diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index cd90b4c6a06b..d5b87f42a96e 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -385,7 +385,7 @@ void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm) * */ -static struct cm_ll_data omap2xxx_cm_ll_data = { +static const struct cm_ll_data omap2xxx_cm_ll_data = { .split_idlest_reg = &omap2xxx_cm_split_idlest_reg, .wait_module_ready = &omap2xxx_cm_wait_module_ready, }; diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index a9e08d89104e..1cc0247a2cb5 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -333,6 +333,11 @@ static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm) return 0; } +static u32 am33xx_cm_xlate_clkctrl(u8 part, u16 inst, u16 offset) +{ + return cm_base.pa + inst + offset; +} + struct clkdm_ops am33xx_clkdm_operations = { .clkdm_sleep = am33xx_clkdm_sleep, .clkdm_wakeup = am33xx_clkdm_wakeup, @@ -342,11 +347,12 @@ struct clkdm_ops am33xx_clkdm_operations = { .clkdm_clk_disable = am33xx_clkdm_clk_disable, }; -static struct cm_ll_data am33xx_cm_ll_data = { +static const struct cm_ll_data am33xx_cm_ll_data = { .wait_module_ready = &am33xx_cm_wait_module_ready, .wait_module_idle = &am33xx_cm_wait_module_idle, .module_enable = &am33xx_cm_module_enable, .module_disable = &am33xx_cm_module_disable, + .xlate_clkctrl = &am33xx_cm_xlate_clkctrl, }; int __init am33xx_cm_init(const struct omap_prcm_init_data *data) diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index 961bc478b9de..ec580fd094a6 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -662,7 +662,7 @@ void omap3_cm_save_scratchpad_contents(u32 *ptr) * */ -static struct cm_ll_data omap3xxx_cm_ll_data = { +static const struct cm_ll_data omap3xxx_cm_ll_data = { .split_idlest_reg = &omap3xxx_cm_split_idlest_reg, .wait_module_ready = &omap3xxx_cm_wait_module_ready, }; diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index 83c6fa74cc31..aff747ecad51 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -29,7 +29,7 @@ * common CM functions */ static struct cm_ll_data null_cm_ll_data; -static struct cm_ll_data *cm_ll_data = &null_cm_ll_data; +static const struct cm_ll_data *cm_ll_data = &null_cm_ll_data; /* cm_base: base virtual address of the CM IP block */ struct omap_domain_base cm_base; @@ -178,6 +178,16 @@ int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs) return 0; } +u32 omap_cm_xlate_clkctrl(u8 part, u16 inst, u16 clkctrl_offs) +{ + if (!cm_ll_data->xlate_clkctrl) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return 0; + } + return cm_ll_data->xlate_clkctrl(part, inst, clkctrl_offs); +} + /** * cm_register - register per-SoC low-level data with the CM * @cld: low-level per-SoC OMAP CM data & function pointers to register @@ -189,7 +199,7 @@ int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs) * is NULL, or -EEXIST if cm_register() has already been called * without an intervening cm_unregister(). */ -int cm_register(struct cm_ll_data *cld) +int cm_register(const struct cm_ll_data *cld) { if (!cld) return -EINVAL; @@ -213,7 +223,7 @@ int cm_register(struct cm_ll_data *cld) * -EINVAL if @cld is NULL or if @cld does not match the struct * cm_ll_data * previously registered by cm_register(). */ -int cm_unregister(struct cm_ll_data *cld) +int cm_unregister(const struct cm_ll_data *cld) { if (!cld || cm_ll_data != cld) return -EINVAL; diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 8774e983bea1..7deefee49fc3 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -476,12 +476,9 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) return 0; } -static u32 omap4_clkdm_xlate_address(struct clockdomain *clkdm) +static u32 omap4_cminst_xlate_clkctrl(u8 part, u16 inst, u16 offset) { - u32 addr = _cm_bases[clkdm->prcm_partition].pa + clkdm->cm_inst + - clkdm->clkdm_offs; - - return addr; + return _cm_bases[part].pa + inst + offset; } struct clkdm_ops omap4_clkdm_operations = { @@ -499,7 +496,6 @@ struct clkdm_ops omap4_clkdm_operations = { .clkdm_deny_idle = omap4_clkdm_deny_idle, .clkdm_clk_enable = omap4_clkdm_clk_enable, .clkdm_clk_disable = omap4_clkdm_clk_disable, - .clkdm_xlate_address = omap4_clkdm_xlate_address, }; struct clkdm_ops am43xx_clkdm_operations = { @@ -509,14 +505,14 @@ struct clkdm_ops am43xx_clkdm_operations = { .clkdm_deny_idle = omap4_clkdm_deny_idle, .clkdm_clk_enable = omap4_clkdm_clk_enable, .clkdm_clk_disable = omap4_clkdm_clk_disable, - .clkdm_xlate_address = omap4_clkdm_xlate_address, }; -static struct cm_ll_data omap4xxx_cm_ll_data = { +static const struct cm_ll_data omap4xxx_cm_ll_data = { .wait_module_ready = &omap4_cminst_wait_module_ready, .wait_module_idle = &omap4_cminst_wait_module_idle, .module_enable = &omap4_cminst_module_enable, .module_disable = &omap4_cminst_module_disable, + .xlate_clkctrl = &omap4_cminst_xlate_clkctrl, }; int __init omap4_cm_init(const struct omap_prcm_init_data *data) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index df2c29edbbcd..68ba5f472f6b 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -657,8 +657,11 @@ void __init dra7xxx_check_revision(void) { u32 idcode; u16 hawkeye; - u8 rev; + u8 rev, package; + struct omap_die_id odi; + omap_get_die_id(&odi); + package = (odi.id_2 >> 16) & 0x3; idcode = read_tap_reg(OMAP_TAP_IDCODE); hawkeye = (idcode >> 12) & 0xffff; rev = (idcode >> 28) & 0xff; @@ -667,7 +670,17 @@ void __init dra7xxx_check_revision(void) switch (rev) { case 0: default: - omap_revision = DRA762_REV_ES1_0; + switch (package) { + case 0x2: + omap_revision = DRA762_ABZ_REV_ES1_0; + break; + case 0x3: + omap_revision = DRA762_ACD_REV_ES1_0; + break; + default: + omap_revision = DRA762_REV_ES1_0; + break; + } break; } break; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 104256a5f0f7..124f9af34a15 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -143,6 +143,8 @@ #include <linux/of_address.h> #include <linux/bootmem.h> +#include <linux/platform_data/ti-sysc.h> + #include <asm/system_misc.h> #include "clock.h" @@ -185,15 +187,15 @@ /** * struct clkctrl_provider - clkctrl provider mapping data * @addr: base address for the provider - * @offset: base offset for the provider - * @clkdm: base clockdomain for provider + * @size: size of the provider address space + * @offset: offset of the provider from PRCM instance base * @node: device node associated with the provider * @link: list link */ struct clkctrl_provider { u32 addr; + u32 size; u16 offset; - struct clockdomain *clkdm; struct device_node *node; struct list_head link; }; @@ -223,8 +225,7 @@ struct omap_hwmod_soc_ops { void (*update_context_lost)(struct omap_hwmod *oh); int (*get_context_lost)(struct omap_hwmod *oh); int (*disable_direct_prcm)(struct omap_hwmod *oh); - u32 (*xlate_clkctrl)(struct omap_hwmod *oh, - struct clkctrl_provider *provider); + u32 (*xlate_clkctrl)(struct omap_hwmod *oh); }; /* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ @@ -716,52 +717,35 @@ static const struct of_device_id ti_clkctrl_match_table[] __initconst = { { } }; -static int _match_clkdm(struct clockdomain *clkdm, void *user) -{ - struct clkctrl_provider *provider = user; - - if (clkdm_xlate_address(clkdm) == provider->addr) { - pr_debug("%s: Matched clkdm %s for addr %x (%s)\n", __func__, - clkdm->name, provider->addr, - provider->node->parent->name); - provider->clkdm = clkdm; - - return -1; - } - - return 0; -} - -static int _setup_clkctrl_provider(struct device_node *np) +static int __init _setup_clkctrl_provider(struct device_node *np) { const __be32 *addrp; struct clkctrl_provider *provider; + u64 size; provider = memblock_virt_alloc(sizeof(*provider), 0); if (!provider) return -ENOMEM; - addrp = of_get_address(np, 0, NULL, NULL); + addrp = of_get_address(np, 0, &size, NULL); provider->addr = (u32)of_translate_address(np, addrp); - provider->offset = provider->addr & 0xff; + addrp = of_get_address(np->parent, 0, NULL, NULL); + provider->offset = provider->addr - + (u32)of_translate_address(np->parent, addrp); provider->addr &= ~0xff; + provider->size = size | 0xff; provider->node = np; - clkdm_for_each(_match_clkdm, provider); - - if (!provider->clkdm) { - pr_err("%s: nothing matched for node %s (%x)\n", - __func__, np->parent->name, provider->addr); - memblock_free_early(__pa(provider), sizeof(*provider)); - return -EINVAL; - } + pr_debug("%s: %s: %x...%x [+%x]\n", __func__, np->parent->name, + provider->addr, provider->addr + provider->size, + provider->offset); list_add(&provider->link, &clkctrl_providers); return 0; } -static int _init_clkctrl_providers(void) +static int __init _init_clkctrl_providers(void) { struct device_node *np; int ret = 0; @@ -775,32 +759,48 @@ static int _init_clkctrl_providers(void) return ret; } -static u32 _omap4_xlate_clkctrl(struct omap_hwmod *oh, - struct clkctrl_provider *provider) +static u32 _omap4_xlate_clkctrl(struct omap_hwmod *oh) { - return oh->prcm.omap4.clkctrl_offs - - provider->offset - provider->clkdm->clkdm_offs; + if (!oh->prcm.omap4.modulemode) + return 0; + + return omap_cm_xlate_clkctrl(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->prcm.omap4.clkctrl_offs); } static struct clk *_lookup_clkctrl_clk(struct omap_hwmod *oh) { struct clkctrl_provider *provider; struct clk *clk; + u32 addr; if (!soc_ops.xlate_clkctrl) return NULL; + addr = soc_ops.xlate_clkctrl(oh); + if (!addr) + return NULL; + + pr_debug("%s: %s: addr=%x\n", __func__, oh->name, addr); + list_for_each_entry(provider, &clkctrl_providers, link) { - if (provider->clkdm == oh->clkdm) { + if (provider->addr <= addr && + provider->addr + provider->size >= addr) { struct of_phandle_args clkspec; clkspec.np = provider->node; clkspec.args_count = 2; - clkspec.args[0] = soc_ops.xlate_clkctrl(oh, provider); + clkspec.args[0] = addr - provider->addr - + provider->offset; clkspec.args[1] = 0; clk = of_clk_get_from_provider(&clkspec); + pr_debug("%s: %s got %p (offset=%x, provider=%s)\n", + __func__, oh->name, clk, clkspec.args[0], + provider->node->parent->name); + return clk; } } @@ -3521,6 +3521,7 @@ void __init omap_hwmod_init(void) soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm; + soc_ops.xlate_clkctrl = _omap4_xlate_clkctrl; } else { WARN(1, "omap_hwmod: unknown SoC type\n"); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index df2239a58555..0b8e19f40402 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -37,9 +37,15 @@ struct omap_device; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; +extern struct sysc_regbits omap_hwmod_sysc_type1; +extern struct sysc_regbits omap_hwmod_sysc_type2; +extern struct sysc_regbits omap_hwmod_sysc_type3; +extern struct sysc_regbits omap34xx_sr_sysc_fields; +extern struct sysc_regbits omap36xx_sr_sysc_fields; +extern struct sysc_regbits omap3_sham_sysc_fields; +extern struct sysc_regbits omap3xxx_aes_sysc_fields; +extern struct sysc_regbits omap_hwmod_sysc_type_mcasp; +extern struct sysc_regbits omap_hwmod_sysc_type_usb_host_fs; /* * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant @@ -285,26 +291,6 @@ struct omap_hwmod_ocp_if { #define CLOCKACT_TEST_NONE 0x3 /** - * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets. - * @midle_shift: Offset of the midle bit - * @clkact_shift: Offset of the clockactivity bit - * @sidle_shift: Offset of the sidle bit - * @enwkup_shift: Offset of the enawakeup bit - * @srst_shift: Offset of the softreset bit - * @autoidle_shift: Offset of the autoidle bit - * @dmadisable_shift: Offset of the dmadisable bit - */ -struct omap_hwmod_sysc_fields { - u8 midle_shift; - u8 clkact_shift; - u8 sidle_shift; - u8 enwkup_shift; - u8 srst_shift; - u8 autoidle_shift; - u8 dmadisable_shift; -}; - -/** * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data * @rev_offs: IP block revision register offset (from module base addr) * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) @@ -335,7 +321,7 @@ struct omap_hwmod_class_sysconfig { u32 sysc_offs; u32 syss_offs; u16 sysc_flags; - struct omap_hwmod_sysc_fields *sysc_fields; + struct sysc_regbits *sysc_fields; u8 srst_udelay; u8 idlemodes; }; @@ -343,11 +329,8 @@ struct omap_hwmod_class_sysconfig { /** * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data * @module_offs: PRCM submodule offset from the start of the PRM/CM - * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3) - * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3) * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit - * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit * * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST, * WKEN, GRPSEL registers. In an ideal world, no extra information @@ -357,11 +340,8 @@ struct omap_hwmod_class_sysconfig { */ struct omap_hwmod_omap2_prcm { s16 module_offs; - u8 prcm_reg_id; - u8 module_bit; u8 idlest_reg_id; u8 idlest_idle_bit; - u8 idlest_stdby_bit; }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 1a15a347945a..0afb014b211f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -111,8 +111,6 @@ static struct omap_hwmod omap2420_i2c1_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP2420_EN_I2C1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT, }, @@ -134,8 +132,6 @@ static struct omap_hwmod omap2420_i2c2_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP2420_EN_I2C2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT, }, @@ -167,8 +163,6 @@ static struct omap_hwmod omap2420_mailbox_hwmod = { .main_clk = "mailboxes_ick", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, @@ -197,8 +191,6 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCBSP1_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, @@ -215,8 +207,6 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = { .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCBSP2_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, @@ -247,8 +237,6 @@ static struct omap_hwmod omap2420_msdi1_hwmod = { .main_clk = "mmc_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP2420_EN_MMC_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP2420_ST_MMC_SHIFT, @@ -264,8 +252,6 @@ static struct omap_hwmod omap2420_hdq1w_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_HDQ_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT, }, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 3801850bccec..013b26b305d2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -97,8 +97,6 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { * to hwmod framework. */ .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP2430_EN_I2CHS1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT, }, @@ -115,8 +113,6 @@ static struct omap_hwmod omap2430_i2c2_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP2430_EN_I2CHS2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT, }, @@ -132,8 +128,6 @@ static struct omap_hwmod omap2430_gpio5_hwmod = { .main_clk = "gpio5_fck", .prcm = { .omap2 = { - .prcm_reg_id = 2, - .module_bit = OMAP2430_EN_GPIO5_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 2, .idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT, @@ -165,8 +159,6 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { .main_clk = "mailboxes_ick", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, @@ -185,8 +177,6 @@ static struct omap_hwmod omap2430_mcspi3_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 2, - .module_bit = OMAP2430_EN_MCSPI3_SHIFT, .idlest_reg_id = 2, .idlest_idle_bit = OMAP2430_ST_MCSPI3_SHIFT, }, @@ -219,8 +209,6 @@ static struct omap_hwmod omap2430_usbhsotg_hwmod = { .main_clk = "usbhs_ick", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP2430_EN_USBHS_MASK, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP2430_ST_USBHS_SHIFT, @@ -266,8 +254,6 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCBSP1_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, @@ -284,8 +270,6 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCBSP2_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, @@ -302,8 +286,6 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { .main_clk = "mcbsp3_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP2430_EN_MCBSP3_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 2, .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT, @@ -320,8 +302,6 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { .main_clk = "mcbsp4_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP2430_EN_MCBSP4_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 2, .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT, @@ -338,8 +318,6 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = { .main_clk = "mcbsp5_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP2430_EN_MCBSP5_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 2, .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT, @@ -384,8 +362,6 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 2, - .module_bit = OMAP2430_EN_MMCHS1_SHIFT, .idlest_reg_id = 2, .idlest_idle_bit = OMAP2430_ST_MMCHS1_SHIFT, }, @@ -408,8 +384,6 @@ static struct omap_hwmod omap2430_mmc2_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 2, - .module_bit = OMAP2430_EN_MMCHS2_SHIFT, .idlest_reg_id = 2, .idlest_idle_bit = OMAP2430_ST_MMCHS2_SHIFT, }, @@ -424,8 +398,6 @@ static struct omap_hwmod omap2430_hdq1w_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_HDQ_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT, }, diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index beec4cd617b1..4b094cb384cb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -242,8 +242,6 @@ struct omap_hwmod omap2xxx_timer1_hwmod = { .main_clk = "gpt1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT1_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT, @@ -261,8 +259,6 @@ struct omap_hwmod omap2xxx_timer2_hwmod = { .main_clk = "gpt2_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT2_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, @@ -279,8 +275,6 @@ struct omap_hwmod omap2xxx_timer3_hwmod = { .main_clk = "gpt3_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT3_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, @@ -297,8 +291,6 @@ struct omap_hwmod omap2xxx_timer4_hwmod = { .main_clk = "gpt4_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT4_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, @@ -315,8 +307,6 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { .main_clk = "gpt5_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT5_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, @@ -334,8 +324,6 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { .main_clk = "gpt6_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT6_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, @@ -353,8 +341,6 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { .main_clk = "gpt7_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT7_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, @@ -372,8 +358,6 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { .main_clk = "gpt8_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT8_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, @@ -391,8 +375,6 @@ struct omap_hwmod omap2xxx_timer9_hwmod = { .main_clk = "gpt9_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT9_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT, @@ -410,8 +392,6 @@ struct omap_hwmod omap2xxx_timer10_hwmod = { .main_clk = "gpt10_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT10_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, @@ -429,8 +409,6 @@ struct omap_hwmod omap2xxx_timer11_hwmod = { .main_clk = "gpt11_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT11_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT, @@ -448,8 +426,6 @@ struct omap_hwmod omap2xxx_timer12_hwmod = { .main_clk = "gpt12_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT12_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT, @@ -467,8 +443,6 @@ struct omap_hwmod omap2xxx_wd_timer2_hwmod = { .main_clk = "mpu_wdt_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, @@ -485,8 +459,6 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_UART1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, }, @@ -503,8 +475,6 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_UART2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, }, @@ -521,8 +491,6 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 2, - .module_bit = OMAP24XX_EN_UART3_SHIFT, .idlest_reg_id = 2, .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, }, @@ -547,11 +515,8 @@ struct omap_hwmod omap2xxx_dss_core_hwmod = { .main_clk = "dss1_fck", /* instead of dss_fck */ .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, - .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, }, }, .opt_clks = dss_opt_clks, @@ -565,11 +530,8 @@ struct omap_hwmod omap2xxx_dss_dispc_hwmod = { .main_clk = "dss1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, - .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, }, }, .flags = HWMOD_NO_IDLEST, @@ -586,8 +548,6 @@ struct omap_hwmod omap2xxx_dss_rfbi_hwmod = { .main_clk = "dss1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, .module_offs = CORE_MOD, }, }, @@ -602,8 +562,6 @@ struct omap_hwmod omap2xxx_dss_venc_hwmod = { .main_clk = "dss_54m_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, .module_offs = CORE_MOD, }, }, @@ -623,8 +581,6 @@ struct omap_hwmod omap2xxx_gpio1_hwmod = { .main_clk = "gpios_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, @@ -641,8 +597,6 @@ struct omap_hwmod omap2xxx_gpio2_hwmod = { .main_clk = "gpios_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, @@ -659,8 +613,6 @@ struct omap_hwmod omap2xxx_gpio3_hwmod = { .main_clk = "gpios_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, @@ -677,8 +629,6 @@ struct omap_hwmod omap2xxx_gpio4_hwmod = { .main_clk = "gpios_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, @@ -699,8 +649,6 @@ struct omap_hwmod omap2xxx_mcspi1_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCSPI1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT, }, @@ -720,8 +668,6 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCSPI2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT, }, @@ -740,8 +686,6 @@ struct omap_hwmod omap2xxx_counter_32k_hwmod = { .prcm = { .omap2 = { .module_offs = WKUP_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_ST_32KSYNC_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP24XX_ST_32KSYNC_SHIFT, }, @@ -758,8 +702,6 @@ struct omap_hwmod omap2xxx_gpmc_hwmod = { .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS, .prcm = { .omap2 = { - .prcm_reg_id = 3, - .module_bit = OMAP24XX_EN_GPMC_MASK, .module_offs = CORE_MOD, }, }, @@ -787,8 +729,6 @@ struct omap_hwmod omap2xxx_rng_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 4, - .module_bit = OMAP24XX_EN_RNG_SHIFT, .idlest_reg_id = 4, .idlest_idle_bit = OMAP24XX_ST_RNG_SHIFT, }, @@ -825,8 +765,6 @@ struct omap_hwmod omap2xxx_sham_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 4, - .module_bit = OMAP24XX_EN_SHA_SHIFT, .idlest_reg_id = 4, .idlest_idle_bit = OMAP24XX_ST_SHA_SHIFT, }, @@ -856,8 +794,6 @@ struct omap_hwmod omap2xxx_aes_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 4, - .module_bit = OMAP24XX_EN_AES_SHIFT, .idlest_reg_id = 4, .idlest_idle_bit = OMAP24XX_ST_AES_SHIFT, }, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 52c9d585b44d..1a2f2242e31b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -113,8 +113,6 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .prcm = { .omap2 = { .module_offs = OMAP3430_IVA2_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, }, @@ -188,8 +186,6 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { .main_clk = "gpt1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT1_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT, @@ -206,8 +202,6 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { .main_clk = "gpt2_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT2_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, @@ -223,8 +217,6 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { .main_clk = "gpt3_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT3_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT, @@ -240,8 +232,6 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { .main_clk = "gpt4_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT4_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT, @@ -257,8 +247,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { .main_clk = "gpt5_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT5_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT, @@ -275,8 +263,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { .main_clk = "gpt6_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT6_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT, @@ -293,8 +279,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { .main_clk = "gpt7_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT7_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT, @@ -311,8 +295,6 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { .main_clk = "gpt8_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT8_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT, @@ -329,8 +311,6 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { .main_clk = "gpt9_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT9_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT, @@ -347,8 +327,6 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { .main_clk = "gpt10_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT10_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT, @@ -365,8 +343,6 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { .main_clk = "gpt11_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT11_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT, @@ -384,8 +360,6 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = { .main_clk = "gpt12_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPT12_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT, @@ -439,8 +413,6 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { .main_clk = "wdt2_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_WDT2_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT, @@ -461,8 +433,6 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_UART1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_EN_UART1_SHIFT, }, @@ -478,8 +448,6 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_UART2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_EN_UART2_SHIFT, }, @@ -496,8 +464,6 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_UART3_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_EN_UART3_SHIFT, }, @@ -515,8 +481,6 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3630_EN_UART4_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3630_EN_UART4_SHIFT, }, @@ -546,8 +510,6 @@ static struct omap_hwmod am35xx_uart4_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = AM35XX_EN_UART4_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = AM35XX_ST_UART4_SHIFT, }, @@ -583,11 +545,8 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_DSS1_SHIFT, .module_offs = OMAP3430_DSS_MOD, .idlest_reg_id = 1, - .idlest_stdby_bit = OMAP3430ES1_ST_DSS_SHIFT, }, }, .opt_clks = dss_opt_clks, @@ -602,12 +561,9 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_DSS1_SHIFT, .module_offs = OMAP3430_DSS_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT, - .idlest_stdby_bit = OMAP3430ES2_ST_DSS_STDBY_SHIFT, }, }, .opt_clks = dss_opt_clks, @@ -642,8 +598,6 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_DSS1_SHIFT, .module_offs = OMAP3430_DSS_MOD, }, }, @@ -683,8 +637,6 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_DSS1_SHIFT, .module_offs = OMAP3430_DSS_MOD, }, }, @@ -703,8 +655,6 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_DSS1_SHIFT, .module_offs = OMAP3430_DSS_MOD, }, }, @@ -724,8 +674,6 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .main_clk = "dss_tv_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_DSS1_SHIFT, .module_offs = OMAP3430_DSS_MOD, }, }, @@ -747,8 +695,6 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_I2C1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_I2C1_SHIFT, }, @@ -770,8 +716,6 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_I2C2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_I2C2_SHIFT, }, @@ -795,8 +739,6 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_I2C3_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_I2C3_SHIFT, }, @@ -846,8 +788,6 @@ static struct omap_hwmod omap3xxx_gpio1_hwmod = { .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPIO1_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT, @@ -870,8 +810,6 @@ static struct omap_hwmod omap3xxx_gpio2_hwmod = { .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPIO2_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT, @@ -894,8 +832,6 @@ static struct omap_hwmod omap3xxx_gpio3_hwmod = { .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPIO3_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT, @@ -918,8 +854,6 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = { .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPIO4_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT, @@ -943,8 +877,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = { .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPIO5_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT, @@ -968,8 +900,6 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = { .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_GPIO6_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT, @@ -1012,8 +942,6 @@ static struct omap_hwmod omap3xxx_dma_system_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_ST_SDMA_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_SDMA_SHIFT, }, @@ -1060,8 +988,6 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCBSP1_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT, @@ -1083,8 +1009,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCBSP2_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, @@ -1107,8 +1031,6 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .main_clk = "mcbsp3_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCBSP3_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, @@ -1128,8 +1050,6 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { .main_clk = "mcbsp4_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCBSP4_SHIFT, .module_offs = OMAP3430_PER_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT, @@ -1148,8 +1068,6 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { .main_clk = "mcbsp5_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCBSP5_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT, @@ -1190,10 +1108,6 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { }; /* SR common */ -static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = { - .clkact_shift = 20, -}; - static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = { .sysc_offs = 0x24, .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE), @@ -1206,11 +1120,6 @@ static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = { .rev = 1, }; -static struct omap_hwmod_sysc_fields omap36xx_sr_sysc_fields = { - .sidle_shift = 24, - .enwkup_shift = 26, -}; - static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = { .sysc_offs = 0x38, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), @@ -1237,8 +1146,6 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { .main_clk = "sr1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_SR1_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_EN_SR1_SHIFT, @@ -1254,8 +1161,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = { .main_clk = "sr1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_SR1_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_EN_SR1_SHIFT, @@ -1276,8 +1181,6 @@ static struct omap_hwmod omap34xx_sr2_hwmod = { .main_clk = "sr2_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_SR2_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_EN_SR2_SHIFT, @@ -1293,8 +1196,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = { .main_clk = "sr2_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_SR2_SHIFT, .module_offs = WKUP_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_EN_SR2_SHIFT, @@ -1330,8 +1231,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { .main_clk = "mailboxes_ick", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MAILBOXES_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT, @@ -1373,8 +1272,6 @@ static struct omap_hwmod omap34xx_mcspi1 = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCSPI1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MCSPI1_SHIFT, }, @@ -1394,8 +1291,6 @@ static struct omap_hwmod omap34xx_mcspi2 = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCSPI2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MCSPI2_SHIFT, }, @@ -1417,8 +1312,6 @@ static struct omap_hwmod omap34xx_mcspi3 = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCSPI3_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MCSPI3_SHIFT, }, @@ -1440,8 +1333,6 @@ static struct omap_hwmod omap34xx_mcspi4 = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCSPI4_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MCSPI4_SHIFT, }, @@ -1475,12 +1366,9 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { .main_clk = "hsotgusb_ick", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_HSOTGUSB_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT, - .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT, }, }, .class = &usbotg_class, @@ -1555,8 +1443,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MMC1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT, }, @@ -1573,8 +1459,6 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MMC1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT, }, @@ -1604,8 +1488,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MMC2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT, }, @@ -1622,8 +1504,6 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MMC2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT, }, @@ -1647,8 +1527,6 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MMC3_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_MMC3_SHIFT, }, @@ -1688,11 +1566,8 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { .prcm = { .omap2 = { .module_offs = OMAP3430ES2_USBHOST_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT, - .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT, }, }, @@ -1766,8 +1641,6 @@ static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 3, - .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT, .idlest_reg_id = 3, .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT, }, @@ -1780,8 +1653,6 @@ static struct omap_hwmod omap3xxx_hdq1w_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_HDQ_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_HDQ_SHIFT, }, @@ -1807,8 +1678,6 @@ static struct omap_hwmod omap3xxx_sad2d_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_SAD2D_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_SAD2D_SHIFT, }, @@ -1842,8 +1711,6 @@ static struct omap_hwmod omap3xxx_counter_32k_hwmod = { .prcm = { .omap2 = { .module_offs = WKUP_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_ST_32KSYNC_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_32KSYNC_SHIFT, }, @@ -2454,7 +2321,6 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = { .prcm = { .omap2 = { .module_offs = OMAP3430_IVA2_MOD, - .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, }, @@ -2732,12 +2598,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = { }; /* l4_core -> SHAM2 (SHA1/MD5) (similar to omap24xx) */ -static struct omap_hwmod_sysc_fields omap3_sham_sysc_fields = { - .sidle_shift = 4, - .srst_shift = 1, - .autoidle_shift = 0, -}; - static struct omap_hwmod_class_sysconfig omap3_sham_sysc = { .rev_offs = 0x5c, .sysc_offs = 0x60, @@ -2760,8 +2620,6 @@ static struct omap_hwmod omap3xxx_sham_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_SHA12_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_SHA12_SHIFT, }, @@ -2778,12 +2636,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = { }; /* l4_core -> AES */ -static struct omap_hwmod_sysc_fields omap3xxx_aes_sysc_fields = { - .sidle_shift = 6, - .srst_shift = 1, - .autoidle_shift = 0, -}; - static struct omap_hwmod_class_sysconfig omap3_aes_sysc = { .rev_offs = 0x44, .sysc_offs = 0x48, @@ -2806,8 +2658,6 @@ static struct omap_hwmod omap3xxx_aes_hwmod = { .prcm = { .omap2 = { .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_AES2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_AES2_SHIFT, }, @@ -2850,8 +2700,6 @@ static struct omap_hwmod omap3xxx_ssi_hwmod = { .main_clk = "ssi_ssr_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_SSI_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index c47709659a54..a1901c22a0f0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1658,10 +1658,6 @@ static struct omap_hwmod omap44xx_mailbox_hwmod = { */ /* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_mcasp = { - .sidle_shift = 0, -}; - static struct omap_hwmod_class_sysconfig omap44xx_mcasp_sysc = { .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, @@ -2403,17 +2399,12 @@ static struct omap_hwmod omap44xx_slimbus2_hwmod = { */ /* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_smartreflex = { - .sidle_shift = 24, - .enwkup_shift = 26, -}; - static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = { .sysc_offs = 0x0038, .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type_smartreflex, + .sysc_fields = &omap36xx_sr_sysc_fields, }; static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = { @@ -2844,12 +2835,6 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { */ /* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_usb_host_fs = { - .midle_shift = 4, - .sidle_shift = 2, - .srst_shift = 1, -}; - static struct omap_hwmod_class_sysconfig omap44xx_usb_host_fs_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0210, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index d05e553d6346..4c2a05b1bd19 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2055,17 +2055,12 @@ static struct omap_hwmod dra7xx_sata_hwmod = { */ /* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_smartreflex = { - .sidle_shift = 24, - .enwkup_shift = 26, -}; - static struct omap_hwmod_class_sysconfig dra7xx_smartreflex_sysc = { .sysc_offs = 0x0038, .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type_smartreflex, + .sysc_fields = &omap36xx_sr_sysc_fields, }; static struct omap_hwmod_class dra7xx_smartreflex_hwmod_class = { @@ -4019,6 +4014,10 @@ static struct omap_hwmod_ocp_if *dra76x_hwmod_ocp_ifs[] __initdata = { NULL, }; +static struct omap_hwmod_ocp_if *acd_76x_hwmod_ocp_ifs[] __initdata = { + NULL, +}; + static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per3__usb_otg_ss4, NULL, @@ -4028,7 +4027,7 @@ static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = { NULL, }; -static struct omap_hwmod_ocp_if *dra74x_dra72x_hwmod_ocp_ifs[] __initdata = { +static struct omap_hwmod_ocp_if *rtc_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per3__rtcss, NULL, }; @@ -4040,19 +4039,26 @@ int __init dra7xx_hwmod_init(void) omap_hwmod_init(); ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); - if (!ret && soc_is_dra74x()) + if (!ret && soc_is_dra74x()) { ret = omap_hwmod_register_links(dra74x_hwmod_ocp_ifs); - else if (!ret && soc_is_dra72x()) + if (!ret) + ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); + } else if (!ret && soc_is_dra72x()) { ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs); - else if (!ret && soc_is_dra76x()) + if (!ret && !of_machine_is_compatible("ti,dra718")) + ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); + } else if (!ret && soc_is_dra76x()) { ret = omap_hwmod_register_links(dra76x_hwmod_ocp_ifs); + if (!ret && soc_is_dra76x_acd()) { + ret = omap_hwmod_register_links(acd_76x_hwmod_ocp_ifs); + } else if (!ret && soc_is_dra76x_abz()) { + ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); + } + } + if (!ret && omap_type() == OMAP2_DEVICE_TYPE_GP) ret = omap_hwmod_register_links(dra7xx_gp_hwmod_ocp_ifs); - /* now for the IPs available only in dra74 and dra72 */ - if (!ret && !of_machine_is_compatible("ti,dra718") && !soc_is_dra76x()) - ret = omap_hwmod_register_links(dra74x_dra72x_hwmod_ocp_ifs); - return ret; } diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 77a515b11ec2..84f118280a0e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -988,7 +988,7 @@ static struct omap_hwmod_class dm81xx_sata_hwmod_class = { static struct omap_hwmod dm81xx_sata_hwmod = { .name = "sata", - .clkdm_name = "default_sata_clkdm", + .clkdm_name = "default_clkdm", .flags = HWMOD_NO_IDLEST, .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 79d623b83e49..77c0b7618ea2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -16,6 +16,9 @@ * data and their integration with other OMAP modules and Linux. */ +#include <linux/types.h> +#include <linux/platform_data/ti-sysc.h> + #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" @@ -27,7 +30,7 @@ * if the device ip is compliant with the original PRCM protocol * defined for OMAP2420. */ -struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1 = { +struct sysc_regbits omap_hwmod_sysc_type1 = { .midle_shift = SYSC_TYPE1_MIDLEMODE_SHIFT, .clkact_shift = SYSC_TYPE1_CLOCKACTIVITY_SHIFT, .sidle_shift = SYSC_TYPE1_SIDLEMODE_SHIFT, @@ -43,7 +46,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1 = { * device ip is compliant with the new PRCM protocol defined for new * OMAP4 IPs. */ -struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { +struct sysc_regbits omap_hwmod_sysc_type2 = { .midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT, .sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT, .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, @@ -54,7 +57,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { * struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme. * Used by some IPs on AM33xx */ -struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = { +struct sysc_regbits omap_hwmod_sysc_type3 = { .midle_shift = SYSC_TYPE3_MIDLEMODE_SHIFT, .sidle_shift = SYSC_TYPE3_SIDLEMODE_SHIFT, }; @@ -63,3 +66,34 @@ struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = { .manager_count = 2, .has_framedonetv_irq = 0 }; + +struct sysc_regbits omap34xx_sr_sysc_fields = { + .clkact_shift = 20, +}; + +struct sysc_regbits omap36xx_sr_sysc_fields = { + .sidle_shift = 24, + .enwkup_shift = 26, +}; + +struct sysc_regbits omap3_sham_sysc_fields = { + .sidle_shift = 4, + .srst_shift = 1, + .autoidle_shift = 0, +}; + +struct sysc_regbits omap3xxx_aes_sysc_fields = { + .sidle_shift = 6, + .srst_shift = 1, + .autoidle_shift = 0, +}; + +struct sysc_regbits omap_hwmod_sysc_type_mcasp = { + .sidle_shift = 0, +}; + +struct sysc_regbits omap_hwmod_sysc_type_usb_host_fs = { + .midle_shift = 4, + .sidle_shift = 2, + .srst_shift = 1, +}; diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 28fa1f8d8363..050891e055a4 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -143,6 +143,14 @@ static inline int is_dra ##subclass (void) \ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ } +#define GET_DRA_PACKAGE (omap_rev() & 0xff) + +#define IS_DRA_SUBCLASS_PACKAGE(subclass, package, id) \ +static inline int is_dra ##subclass ##_ ##package (void) \ +{ \ + return (is_dra ##subclass () && GET_DRA_PACKAGE == id) ? 1 : 0; \ +} + IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_CLASS(44xx, 0x44) @@ -168,6 +176,8 @@ IS_TI_SUBCLASS(814x, 0x814) IS_AM_SUBCLASS(335x, 0x335) IS_AM_SUBCLASS(437x, 0x437) IS_DRA_SUBCLASS(76x, 0x76) +IS_DRA_SUBCLASS_PACKAGE(76x, abz, 2) +IS_DRA_SUBCLASS_PACKAGE(76x, acd, 3) IS_DRA_SUBCLASS(75x, 0x75) IS_DRA_SUBCLASS(72x, 0x72) @@ -317,10 +327,14 @@ IS_OMAP_TYPE(3430, 0x3430) #if defined(CONFIG_SOC_DRA7XX) #undef soc_is_dra7xx #undef soc_is_dra76x +#undef soc_is_dra76x_abz +#undef soc_is_dra76x_acd #undef soc_is_dra74x #undef soc_is_dra72x #define soc_is_dra7xx() is_dra7xx() #define soc_is_dra76x() is_dra76x() +#define soc_is_dra76x_abz() is_dra76x_abz() +#define soc_is_dra76x_acd() is_dra76x_acd() #define soc_is_dra74x() is_dra75x() #define soc_is_dra72x() is_dra72x() #endif @@ -391,6 +405,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define DRA7XX_CLASS 0x07000000 #define DRA762_REV_ES1_0 (DRA7XX_CLASS | (0x62 << 16) | (0x10 << 8)) +#define DRA762_ABZ_REV_ES1_0 (DRA762_REV_ES1_0 | (2 << 0)) +#define DRA762_ACD_REV_ES1_0 (DRA762_REV_ES1_0 | (3 << 0)) #define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8)) #define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8)) #define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8)) diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index ce7d97babb0f..a68b34183107 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -40,6 +40,7 @@ config MACH_PXA3XX_DT config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform (aka Lubbock)" + select GPIO_REG select PXA25x select SA1111 diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index d6d92f388f14..f4f8f23bda8c 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -28,7 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/types.h> #include <linux/platform_data/pcf857x.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/physmap.h> #include <linux/regulator/max1586.h> diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 868448d2cd82..c487401b6fdb 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -31,7 +31,7 @@ #include <linux/i2c.h> #include <linux/platform_data/pca953x.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/mfd/da903x.h> #include <linux/regulator/machine.h> diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index dc44fbbe5073..10e2278b7a28 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -19,7 +19,7 @@ #include <mach/hardware.h> #include <asm/mach/arch.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/io.h> #include "pxa27x.h" diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index d7cf47d03618..3ccf2a95569b 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -23,7 +23,7 @@ #include <linux/platform_device.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/irq.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 7270f0db3432..9a5a35e90769 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -26,7 +26,7 @@ #include <linux/gpio.h> #include <linux/backlight.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/io.h> #include <linux/regulator/machine.h> #include <linux/spi/spi.h> @@ -606,24 +606,6 @@ static void __init corgi_init_spi(void) static inline void corgi_init_spi(void) {} #endif -static struct mtd_partition sharpsl_nand_partitions[] = { - { - .name = "System Area", - .offset = 0, - .size = 7 * 1024 * 1024, - }, - { - .name = "Root Filesystem", - .offset = 7 * 1024 * 1024, - .size = 25 * 1024 * 1024, - }, - { - .name = "Home Filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; static struct nand_bbt_descr sharpsl_bbt = { @@ -633,10 +615,16 @@ static struct nand_bbt_descr sharpsl_bbt = { .pattern = scan_ff_pattern }; +static const char * const probes[] = { + "cmdlinepart", + "ofpart", + "sharpslpart", + NULL, +}; + static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { .badblock_pattern = &sharpsl_bbt, - .partitions = sharpsl_nand_partitions, - .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions), + .part_parsers = probes, }; static struct resource sharpsl_nand_resources[] = { @@ -750,9 +738,6 @@ static void __init corgi_init(void) platform_scoop_config = &corgi_pcmcia_config; - if (machine_is_husky()) - sharpsl_nand_partitions[1].size = 53 * 1024 * 1024; - platform_add_devices(devices, ARRAY_SIZE(devices)); regulator_has_full_constraints(); diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index bf19b8426d2c..271aedae7542 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -17,7 +17,7 @@ #include <linux/mtd/partitions.h> #include <linux/sm501.h> #include <linux/smsc911x.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 5a72456a19ce..d7c9a8476d57 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -5,7 +5,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/spi/pxa2xx_spi.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include "udc.h" #include <linux/platform_data/usb-pxa3xx-ulpi.h> diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 905628dfbbbb..11263f7c455b 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -56,3 +56,12 @@ extern struct platform_device pxa93x_device_gpio; void __init pxa_register_device(struct platform_device *dev, void *data); void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors); + +struct i2c_pxa_platform_data; +extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); +#ifdef CONFIG_PXA27x +extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info); +#endif +#ifdef CONFIG_PXA3xx +extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info); +#endif diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 6d28035ebba5..49022ad338e9 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -32,7 +32,7 @@ #include <linux/apm-emulation.h> #include <linux/i2c.h> #include <linux/platform_data/pca953x.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/regulator/userspace-consumer.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index a057cf9c0e7b..2c90b58f347d 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -23,7 +23,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds-lp3944.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/setup.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 66184f5cbe40..e2e7f247a645 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -38,7 +38,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/usb/gpio_vbus.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index fae38fdc8d8e..4105614cc38e 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -28,7 +28,7 @@ #include <linux/leds.h> #include <linux/mfd/da903x.h> #include <linux/platform_data/max732x.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/types.h> #include <asm/setup.h> @@ -42,6 +42,7 @@ #include <asm/mach/irq.h> #include "pxa300.h" +#include "devices.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/keypad-pxa27x.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index df45682e99a5..fe2ef9b78602 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -13,6 +13,7 @@ */ #include <linux/clkdev.h> #include <linux/gpio.h> +#include <linux/gpio/gpio-reg.h> #include <linux/gpio/machine.h> #include <linux/module.h> #include <linux/kernel.h> @@ -110,20 +111,18 @@ static unsigned long lubbock_pin_config[] __initdata = { }; #define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) -#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) void lubbock_set_hexled(uint32_t value) { LUB_HEXLED = value; } +static struct gpio_chip *lubbock_misc_wr_gc; + void lubbock_set_misc_wr(unsigned int mask, unsigned int set) { - unsigned long flags; - - local_irq_save(flags); - LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask); - local_irq_restore(flags); + unsigned long m = mask, v = set; + lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v); } EXPORT_SYMBOL(lubbock_set_misc_wr); @@ -452,9 +451,9 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode) local_irq_save(flags); if (mode & IR_SIRMODE) { - LUB_MISC_WR &= ~(1 << 4); + lubbock_set_misc_wr(BIT(4), 0); } else if (mode & IR_FIRMODE) { - LUB_MISC_WR |= 1 << 4; + lubbock_set_misc_wr(BIT(4), BIT(4)); } pxa2xx_transceiver_mode(dev, mode); local_irq_restore(flags); @@ -472,6 +471,15 @@ static void __init lubbock_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config)); + lubbock_misc_wr_gc = gpio_reg_init(NULL, (void *)&LUB_MISC_WR, + -1, 16, "lubbock", 0, LUB_MISC_WR, + NULL, NULL, NULL); + if (IS_ERR(lubbock_misc_wr_gc)) { + pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n", + PTR_ERR(lubbock_misc_wr_gc)); + lubbock_misc_wr_gc = NULL; + } + pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 7f3566c93733..c5325d1ae77b 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -31,7 +31,7 @@ #include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index a2d851a3a546..afd62a94fdbf 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -29,7 +29,7 @@ #include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/slab.h> #include <linux/leds.h> diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 8a5d0491e73c..9b6c7ea45a40 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -42,7 +42,7 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/max1586.h> #include <linux/slab.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index 9a22ae0ad8c9..f9e3d41a4609 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -22,7 +22,7 @@ #include <linux/serial_8250.h> #include <linux/dm9000.h> #include <linux/gpio.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index e5ae99db1de4..1efe9bcf07fa 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -22,7 +22,7 @@ #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 0bd5959ef7d5..973568d4b9ec 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -23,7 +23,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 62a119137be7..1adde1251e2b 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -24,7 +24,7 @@ #include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -333,24 +333,6 @@ static struct pxafb_mach_info poodle_fb_info = { .lcd_conn = LCD_COLOR_TFT_16BPP, }; -static struct mtd_partition sharpsl_nand_partitions[] = { - { - .name = "System Area", - .offset = 0, - .size = 7 * 1024 * 1024, - }, - { - .name = "Root Filesystem", - .offset = 7 * 1024 * 1024, - .size = 22 * 1024 * 1024, - }, - { - .name = "Home Filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; static struct nand_bbt_descr sharpsl_bbt = { @@ -360,10 +342,16 @@ static struct nand_bbt_descr sharpsl_bbt = { .pattern = scan_ff_pattern }; +static const char * const probes[] = { + "cmdlinepart", + "ofpart", + "sharpslpart", + NULL, +}; + static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { .badblock_pattern = &sharpsl_bbt, - .partitions = sharpsl_nand_partitions, - .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions), + .part_parsers = probes, }; static struct resource sharpsl_nand_resources[] = { diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 9b69be4e9fe3..0c06f383ad52 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -22,7 +22,7 @@ #include <linux/syscore_ops.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/mach/map.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 0cc9f124c9ac..4b8a0df8ea57 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -23,7 +23,7 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/syscore_ops.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/mach/map.h> #include <asm/suspend.h> diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 9d662fed03ec..4d5d05cf87d6 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -32,7 +32,7 @@ #include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/lis3lv02d.h> @@ -506,11 +506,16 @@ static void w1_enable_external_pullup(int enable) msleep(100); } +static struct gpiod_lookup_table raumfeld_w1_gpiod_table = { + .dev_id = "w1-gpio", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", GPIO_ONE_WIRE, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + }, +}; + static struct w1_gpio_platform_data w1_gpio_platform_data = { - .pin = GPIO_ONE_WIRE, - .is_open_drain = 0, - .enable_external_pullup = w1_enable_external_pullup, - .ext_pullup_enable_pin = -EINVAL, + .enable_external_pullup = w1_enable_external_pullup, }; static struct platform_device raumfeld_w1_gpio_device = { @@ -523,13 +528,14 @@ static struct platform_device raumfeld_w1_gpio_device = { static void __init raumfeld_w1_init(void) { int ret = gpio_request(GPIO_W1_PULLUP_ENABLE, - "W1 external pullup enable"); + "W1 external pullup enable"); if (ret < 0) pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n"); else gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0); + gpiod_add_lookup_table(&raumfeld_w1_gpiod_table); platform_device_register(&raumfeld_w1_gpio_device); } diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 1414b5f29114..834991034f30 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -20,7 +20,7 @@ #include <linux/delay.h> #include <linux/fb.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/smc91x.h> #include <linux/mfd/da903x.h> #include <linux/mtd/mtd.h> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 398ba9ba2632..ef9fd9b759cb 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -802,8 +802,8 @@ static ssize_t battery_voltage_show(struct device *dev, struct device_attribute return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage); } -static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); -static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); +static DEVICE_ATTR_RO(battery_percentage); +static DEVICE_ATTR_RO(battery_voltage); extern void (*apm_get_power_status)(struct apm_power_info *); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 67d66c702574..5d50025492b7 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -20,7 +20,7 @@ #include <linux/gpio.h> #include <linux/leds.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pca953x.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -739,21 +739,6 @@ static inline void spitz_lcd_init(void) {} * NAND Flash ******************************************************************************/ #if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE) -static struct mtd_partition spitz_nand_partitions[] = { - { - .name = "System Area", - .offset = 0, - .size = 7 * 1024 * 1024, - }, { - .name = "Root Filesystem", - .offset = 7 * 1024 * 1024, - }, { - .name = "Home Filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; static struct nand_bbt_descr spitz_nand_bbt = { @@ -808,10 +793,16 @@ static const struct mtd_ooblayout_ops akita_ooblayout_ops = { .free = akita_ooblayout_free, }; +static const char * const probes[] = { + "cmdlinepart", + "ofpart", + "sharpslpart", + NULL, +}; + static struct sharpsl_nand_platform_data spitz_nand_pdata = { .badblock_pattern = &spitz_nand_bbt, - .partitions = spitz_nand_partitions, - .nr_partitions = ARRAY_SIZE(spitz_nand_partitions), + .part_parsers = probes, }; static struct resource spitz_nand_resources[] = { @@ -834,14 +825,7 @@ static struct platform_device spitz_nand_device = { static void __init spitz_nand_init(void) { - if (machine_is_spitz()) { - spitz_nand_partitions[1].size = 5 * 1024 * 1024; - } else if (machine_is_akita()) { - spitz_nand_partitions[1].size = 58 * 1024 * 1024; - spitz_nand_bbt.len = 1; - spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops; - } else if (machine_is_borzoi()) { - spitz_nand_partitions[1].size = 32 * 1024 * 1024; + if (machine_is_akita() || machine_is_borzoi()) { spitz_nand_bbt.len = 1; spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops; } diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 6b7df6fd2448..df62bb23dbee 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -25,7 +25,7 @@ #include <linux/mtd/plat-ram.h> #include <linux/mtd/partitions.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pcf857x.h> #include <linux/platform_data/at24.h> #include <linux/smc91x.h> diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c index 107f37210fb9..83606087edc7 100644 --- a/arch/arm/mach-pxa/tosa-bt.c +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -132,3 +132,7 @@ static struct platform_driver tosa_bt_driver = { }, }; module_platform_driver(tosa_bt_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dmitry Baryshkov"); +MODULE_DESCRIPTION("Bluetooth built-in chip control"); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 6a386fd6363e..cb5cd8e78c94 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -35,7 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/input/matrix_keypad.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/usb/gpio_vbus.h> #include <linux/reboot.h> #include <linux/memblock.h> @@ -673,24 +673,6 @@ static int tosa_tc6393xb_suspend(struct platform_device *dev) return 0; } -static struct mtd_partition tosa_nand_partition[] = { - { - .name = "smf", - .offset = 0, - .size = 7 * 1024 * 1024, - }, - { - .name = "root", - .offset = MTDPART_OFS_APPEND, - .size = 28 * 1024 * 1024, - }, - { - .name = "home", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = { @@ -700,10 +682,16 @@ static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = { .pattern = scan_ff_pattern }; +static const char * const probes[] = { + "cmdlinepart", + "ofpart", + "sharpslpart", + NULL, +}; + static struct tmio_nand_data tosa_tc6393xb_nand_config = { - .num_partitions = ARRAY_SIZE(tosa_nand_partition), - .partition = tosa_nand_partition, .badblock_pattern = &tosa_tc6393xb_nand_bbt, + .part_parsers = probes, }; static int tosa_tc6393xb_setup(struct platform_device *dev) diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 3dd13b44c311..55b8c501b6fc 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -28,7 +28,7 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> #include <linux/regulator/machine.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/types.h> #include <asm/setup.h> diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 4185e7ff073f..90d0f277de55 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -37,7 +37,7 @@ #include <linux/jiffies.h> #include <linux/i2c-gpio.h> #include <linux/gpio/machine.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> #include <linux/pwm.h> diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 70ab3ad28237..f65dfb6e20e2 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -27,7 +27,7 @@ #include <linux/ata_platform.h> #include <linux/regulator/machine.h> #include <linux/regulator/max1586.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 056369ef250e..c368c98584c0 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -16,7 +16,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/smc91x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -32,6 +32,7 @@ #include <mach/smemc.h> #include "generic.h" +#include "devices.h" #define XCEP_ETH_PHYS (PXA_CS3_PHYS + 0x00000300) #define XCEP_ETH_PHYS_END (PXA_CS3_PHYS + 0x000fffff) diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 510e533871f3..6fffcfc4621e 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -30,7 +30,7 @@ #include <linux/gpio_keys.h> #include <linux/delay.h> #include <linux/regulator/machine.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index ecbcaee5a2d5..e3851795d6d7 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -26,7 +26,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pca953x.h> #include <linux/apm-emulation.h> #include <linux/can/platform/mcp251x.h> @@ -40,6 +40,7 @@ #include <asm/mach/map.h> #include "pxa27x.h" +#include "devices.h" #include <mach/regs-uart.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index e247acf1400a..0ff4e218080f 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -17,11 +17,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> +#include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pca953x.h> #include <linux/gpio.h> #include "pxa300.h" +#include "devices.h" #include "zylonite.h" #include "generic.h" diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index b198be7d32b6..686f0bbde998 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -1,11 +1,9 @@ -# arch/arm/mach-s3c24xx/Kconfig +# SPDX-License-Identifier: GPL-2.0 # # Copyright (c) 2012 Samsung Electronics Co., Ltd. # http://www.samsung.com/ # # Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 if ARCH_S3C24XX diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 8ac2f58a3480..6692f2de71b2 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -1,11 +1,9 @@ -# arch/arm/mach-s3c24xx/Makefile +# SPDX-License-Identifier: GPL-2.0 # # Copyright (c) 2012 Samsung Electronics Co., Ltd. # http://www.samsung.com/ # # Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 # core diff --git a/arch/arm/mach-s3c24xx/Makefile.boot b/arch/arm/mach-s3c24xx/Makefile.boot index 4457605ba04a..7f19e226035e 100644 --- a/arch/arm/mach-s3c24xx/Makefile.boot +++ b/arch/arm/mach-s3c24xx/Makefile.boot @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + ifeq ($(CONFIG_PM_H1940),y) zreladdr-y += 0x30108000 params_phys-y := 0x30100100 diff --git a/arch/arm/mach-s3c24xx/anubis.h b/arch/arm/mach-s3c24xx/anubis.h index 2691665f27d9..13847292e6c7 100644 --- a/arch/arm/mach-s3c24xx/anubis.h +++ b/arch/arm/mach-s3c24xx/anubis.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2005 Simtec Electronics * http://www.simtec.co.uk/products/ @@ -6,11 +7,7 @@ * ANUBIS - CPLD control constants * ANUBIS - IRQ Number definitions * ANUBIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __MACH_S3C24XX_ANUBIS_H #define __MACH_S3C24XX_ANUBIS_H __FILE__ diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c index 3f0288f2f542..067944398f46 100644 --- a/arch/arm/mach-s3c24xx/bast-ide.c +++ b/arch/arm/mach-s3c24xx/bast-ide.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c2410/bast-ide.c - * - * Copyright 2007 Simtec Electronics - * http://www.simtec.co.uk/products/EB2410ITX/ - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2007 Simtec Electronics +// http://www.simtec.co.uk/products/EB2410ITX/ +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c index ad8f4cd7c327..03728058d58d 100644 --- a/arch/arm/mach-s3c24xx/bast-irq.c +++ b/arch/arm/mach-s3c24xx/bast-irq.c @@ -1,25 +1,9 @@ -/* linux/arch/arm/mach-s3c2410/bast-irq.c - * - * Copyright 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.simtec.co.uk/products/EB2410ITX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2003-2005 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://www.simtec.co.uk/products/EB2410ITX/ #include <linux/init.h> #include <linux/module.h> diff --git a/arch/arm/mach-s3c24xx/bast.h b/arch/arm/mach-s3c24xx/bast.h index 5c7534bae92d..a7726f93f5eb 100644 --- a/arch/arm/mach-s3c24xx/bast.h +++ b/arch/arm/mach-s3c24xx/bast.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -5,11 +6,7 @@ * BAST - CPLD control constants * BAST - IRQ Number definitions * BAST - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __MACH_S3C24XX_BAST_H #define __MACH_S3C24XX_BAST_H __FILE__ diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 0e116c92bf01..58e30cad386c 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/plat-s3c24xx/common-smdk.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Common code for SMDK2410 and SMDK2440 boards - * - * http://www.fluff.org/ben/smdk2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// Common code for SMDK2410 and SMDK2440 boards +// +// http://www.fluff.org/ben/smdk2440/ #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/common-smdk.h b/arch/arm/mach-s3c24xx/common-smdk.h index 98f733e1cb42..c0352b06e435 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.h +++ b/arch/arm/mach-s3c24xx/common-smdk.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -5,10 +6,6 @@ * Common code for SMDK2410 and SMDK2440 boards * * http://www.fluff.org/ben/smdk2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ extern void smdk_machine_init(void); diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 5b6b94ef41e2..3dc029c2d2cb 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -1,25 +1,10 @@ -/* linux/arch/arm/plat-s3c24xx/cpu.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * Ben Dooks <ben@simtec.co.uk> - * - * Common code for S3C24XX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2004-2005 Simtec Electronics +// http://www.simtec.co.uk/products/SWLINUX/ +// Ben Dooks <ben@simtec.co.uk> +// +// Common code for S3C24XX machines #include <linux/dma-mapping.h> #include <linux/init.h> diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index c7ac7e61a22e..d087b20e8857 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Common Header for S3C24XX SoCs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index d4d9514335f4..1a7f38d085dd 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -1,14 +1,10 @@ -/* - * Copyright (c) 2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2009 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// +// S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442 #include <linux/kernel.h> #include <linux/errno.h> diff --git a/arch/arm/mach-s3c24xx/fb-core.h b/arch/arm/mach-s3c24xx/fb-core.h index 103bdbaddd55..1821e820262c 100644 --- a/arch/arm/mach-s3c24xx/fb-core.h +++ b/arch/arm/mach-s3c24xx/fb-core.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2010 Samsung Electronics Co., Ltd. * Pawel Osciak <p.osciak@samsung.com> * * Samsung framebuffer driver core functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_PLAT_FB_CORE_H #define __ASM_PLAT_FB_CORE_H __FILE__ diff --git a/arch/arm/mach-s3c24xx/gta02.h b/arch/arm/mach-s3c24xx/gta02.h index 9430a71e9184..d5610ba829a4 100644 --- a/arch/arm/mach-s3c24xx/gta02.h +++ b/arch/arm/mach-s3c24xx/gta02.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * GTA02 header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __MACH_S3C24XX_GTA02_H #define __MACH_S3C24XX_GTA02_H __FILE__ diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c index 9c8b1279a4ba..46ad20ea87d1 100644 --- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c +++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c @@ -1,14 +1,8 @@ -/* - * arch/arm/mach-s3c2410/h1940-bluetooth.c - * Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - * - * S3C2410 bluetooth "driver" - * - */ +// SPDX-License-Identifier: GPL-1.0 +// +// Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org> +// +// S3C2410 bluetooth "driver" #include <linux/module.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-s3c24xx/h1940.h b/arch/arm/mach-s3c24xx/h1940.h index 596d9f64c5b6..5dfe9d10cd15 100644 --- a/arch/arm/mach-s3c24xx/h1940.h +++ b/arch/arm/mach-s3c24xx/h1940.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2006 Ben Dooks <ben-linux@fluff.org> * @@ -6,11 +7,7 @@ * Ben Dooks <ben@simtec.co.uk> * * iPAQ H1940 series definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __MACH_S3C24XX_H1940_H #define __MACH_S3C24XX_H1940_H __FILE__ diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 9e8117198e0c..25fc9c258fc1 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -1,14 +1,10 @@ -/* arch/arm/mach-s3c2410/include/mach/dma.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Samsung S3C24XX DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ diff --git a/arch/arm/mach-s3c24xx/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h index a957bc8ed44f..4e539cb8b884 100644 --- a/arch/arm/mach-s3c24xx/include/mach/fb.h +++ b/arch/arm/mach-s3c24xx/include/mach/fb.h @@ -1 +1,2 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #include <plat/fb-s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h index 528fcdc4f63e..2ad22b2d459b 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h @@ -1,14 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C2410 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /* some boards require extra gpio capacity to support external * devices that need GPIO. diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h index dedd3837c193..1b2975708e3f 100644 --- a/arch/arm/mach-s3c24xx/include/mach/hardware.h +++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2003 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 - hardware - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index b6dd4cb5a2ec..aaf3bae08b52 100644 --- a/arch/arm/mach-s3c24xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h @@ -1,12 +1,8 @@ -/* arch/arm/mach-s3c2410/include/mach/irqs.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2003-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_IRQS_H diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h index adc39043aa21..bca93112f57d 100644 --- a/arch/arm/mach-s3c24xx/include/mach/map.h +++ b/arch/arm/mach-s3c24xx/include/mach/map.h @@ -1,14 +1,10 @@ -/* arch/arm/mach-s3c2410/include/mach/map.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2003 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h index 712333fec589..5e4ce89d0158 100644 --- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h @@ -1,15 +1,12 @@ -/* linux/arch/arm/mach-s3c2410/include/pm-core.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ + #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h index ae4a3e0f3ba2..7ca3dd4f13c0 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h @@ -1,14 +1,10 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-clock.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * S3C2410 clock register definitions -*/ + */ #ifndef __ASM_ARM_REGS_CLOCK #define __ASM_ARM_REGS_CLOCK diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index 0d622f3b57a5..594e967c0673 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -1,14 +1,10 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk> * http://www.simtec.co.uk/products/SWLINUX/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * S3C2410 GPIO register definitions -*/ + */ #ifndef __ASM_ARCH_REGS_GPIO_H diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-irq.h b/arch/arm/mach-s3c24xx/include/mach/regs-irq.h index 0f07ba30b1fb..8d8e669e3903 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-irq.h @@ -1,12 +1,8 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-irq.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef ___ASM_ARCH_REGS_IRQ_H diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h b/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h index ee8f040aff5f..4c3434f261bb 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h @@ -1,13 +1,8 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - + */ #ifndef ___ASM_ARCH_REGS_LCD_H #define ___ASM_ARCH_REGS_LCD_H diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h index ffe37bdb9f59..6bf924612b06 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h @@ -1,15 +1,11 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2007 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * S3C2443 clock register definitions -*/ + */ #ifndef __ASM_ARM_REGS_S3C2443_CLOCK #define __ASM_ARM_REGS_S3C2443_CLOCK diff --git a/arch/arm/mach-s3c24xx/include/mach/rtc-core.h b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h index 4d5f5768f700..88510333b96b 100644 --- a/arch/arm/mach-s3c24xx/include/mach/rtc-core.h +++ b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> * * Samsung RTC Controller core functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __RTC_CORE_H #define __RTC_CORE_H __FILE__ diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h index 548ced42cbb7..b6b32724ace8 100644 --- a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h +++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c index d5f1f06e4811..9f90aaf70bf3 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c @@ -1,14 +1,10 @@ -/* - * Copyright (c) 2006-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2006-2009 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// +// S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442 #include <linux/init.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c index c5b12f6b02b5..59356d10fbcf 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c @@ -1,14 +1,10 @@ -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412/S3C2443 (PL093 based) IO timing support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2006-2008 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// +// S3C2412/S3C2443 (PL093 based) IO timing support #include <linux/init.h> #include <linux/module.h> diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c index 417b7a20c2d1..e0131b16a4af 100644 --- a/arch/arm/mach-s3c24xx/irq-pm.c +++ b/arch/arm/mach-s3c24xx/irq-pm.c @@ -1,15 +1,10 @@ -/* linux/arch/arm/plat-s3c24xx/irq-om.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24XX - IRQ PM code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2003-2004 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// S3C24XX - IRQ PM code #include <linux/init.h> #include <linux/module.h> diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 3e63777a109f..9a9daf526d0c 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -1,30 +1,11 @@ -/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c - * - * linux/arch/arm/mach-s3c2410/mach-amlm5900.c - * - * Copyright (c) 2006 American Microsystems Limited - * David Anders <danders@amltd.com> - - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * @History: - * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by - * Ben Dooks <ben@simtec.co.uk> - * - ***********************************************************************/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2006 American Microsystems Limited +// David Anders <danders@amltd.com> +// +// @History: +// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by +// Ben Dooks <ben@simtec.co.uk> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index c14cab361922..072966dcad78 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -1,13 +1,8 @@ -/* linux/arch/arm/mach-s3c2440/mach-anubis.c - * - * Copyright 2003-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2003-2009 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index ebdbafb9382a..68a4fa94257a 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c - * - * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com> - * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk> - * and modifications by SBZ <sbz@spgui.org> and - * Weibing <http://weibing.blogbus.com> - * - * For product information, visit http://www.arm.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com> +// Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk> +// and modifications by SBZ <sbz@spgui.org> and +// Weibing <http://weibing.blogbus.com> +// +// For product information, visit http://www.arm.com/ #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index 704dc84b3480..a7c3955ae8f6 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c2410/mach-bast.c - * - * Copyright 2003-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.simtec.co.uk/products/EB2410ITX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2003-2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://www.simtec.co.uk/products/EB2410ITX/ #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index afe18baf0c84..9d5595c4ad99 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -1,27 +1,12 @@ -/* - * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner. - * - * Copyright (C) 2006-2009 by Openmoko, Inc. - * Authors: Harald Welte <laforge@openmoko.org> - * Andy Green <andy@openmoko.org> - * Werner Almesberger <werner@openmoko.org> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// S3C2442 Machine Support for Openmoko GTA02 / FreeRunner. +// +// Copyright (C) 2006-2009 by Openmoko, Inc. +// Authors: Harald Welte <laforge@openmoko.org> +// Andy Green <andy@openmoko.org> +// Werner Almesberger <werner@openmoko.org> +// All rights reserved. #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 7ed78619217c..e064c73a57d3 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -1,14 +1,9 @@ -/* - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.handhelds.org/projects/h1940.html - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2003-2005 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://www.handhelds.org/projects/h1940.html #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 17821976f769..a3ddbbbd6d92 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c2410/mach-jive.c - * - * Copyright 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2007 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://armlinux.simtec.co.uk/ #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 04c9f488c498..95753e0bc073 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -1,17 +1,12 @@ -/* linux/arch/arm/mach-s3c2440/mach-mini2440.c - * - * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com> - * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk> - * and modifications by SBZ <sbz@spgui.org> and - * Weibing <http://weibing.blogbus.com> and - * Michel Pollet <buserror@gmail.com> - * - * For product information, visit http://code.google.com/p/mini2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com> +// Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk> +// and modifications by SBZ <sbz@spgui.org> and +// Weibing <http://weibing.blogbus.com> and +// Michel Pollet <buserror@gmail.com> +// +// For product information, visit http://code.google.com/p/mini2440/ #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 070a0d0714a5..eec51fadb14a 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -1,18 +1,15 @@ -/* Machine specific code for the Acer n30, Acer N35, Navman PiN 570, - * Yakumo AlphaX and Airis NC05 PDAs. - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se> - * - * There is a wiki with more information about the n30 port at - * http://handhelds.org/moin/moin.cgi/AcerN30Documentation . - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Machine specific code for the Acer n30, Acer N35, Navman PiN 570, +// Yakumo AlphaX and Airis NC05 PDAs. +// +// Copyright (c) 2003-2005 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se> +// +// There is a wiki with more information about the n30 port at +// http://handhelds.org/moin/moin.cgi/AcerN30Documentation . #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 2a61d13dcd6c..c2f34758ccb6 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -1,16 +1,12 @@ -/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c - * - * Copyright (c) 2004 Nex Vision - * Guillaume GOURAT <guillaume.gourat@nexvision.tv> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 15-10-2004 GG Created initial version - * 12-03-2005 BJD Updated for release - */ +// SPDX-License-Identifier: GPL-2.0 +// linux/arch/arm/mach-s3c2440/mach-nexcoder.c +// +// Copyright (c) 2004 Nex Vision +// Guillaume GOURAT <guillaume.gourat@nexvision.tv> +// +// Modifications: +// 15-10-2004 GG Created initial version +// 12-03-2005 BJD Updated for release #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index 6cac7da15e2b..058ce73137e8 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c @@ -1,15 +1,10 @@ -/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c - * - * Copyright (c) 2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Simtec Osiris Dynamic Voltage Scaling support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2009 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// +// Simtec Osiris Dynamic Voltage Scaling support. #include <linux/kernel.h> #include <linux/module.h> diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index ed3b22ceef06..ee3630cb236a 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -1,12 +1,8 @@ -/* - * Copyright (c) 2005-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2005-2008 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 345a484b93cc..4e24d89e870b 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -1,12 +1,7 @@ -/* - * - * Copyright (c) 2004 Nex Vision - * Guillaume GOURAT <guillaume.gourat@nexvision.fr> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2004 Nex Vision +// Guillaume GOURAT <guillaume.gourat@nexvision.fr> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 84e3a9c53184..9c8373b8d9c3 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -1,25 +1,8 @@ -/* linux/arch/arm/mach-s3c2410/mach-qt2410.c - * - * Copyright (C) 2006 by OpenMoko, Inc. - * Author: Harald Welte <laforge@openmoko.org> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2006 by OpenMoko, Inc. +// Author: Harald Welte <laforge@openmoko.org> +// All rights reserved. #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index e86ad6a68a0b..7f5a18fa305b 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -1,14 +1,9 @@ -/* - * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev, - * Copyright (c) 2007-2010 Vasily Khoruzhick - * - * based on smdk2440 written by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev, +// Copyright (c) 2007-2010 Vasily Khoruzhick +// +// based on smdk2440 written by Ben Dooks #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index b5ba615cf9dd..529c6faf862f 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -1,15 +1,9 @@ -/* linux/arch/arm/mach-s3c2440/mach-rx3715.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.handhelds.org/projects/rx3715.html - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2003-2004 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://www.handhelds.org/projects/rx3715.html #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index c83c076578dd..aa7102713b37 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -1,19 +1,15 @@ -/* - * Samsung's S3C2416 flattened device tree enabled machine - * - * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> - * - * based on mach-exynos/mach-exynos4-dt.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * Copyright (c) 2010-2011 Linaro Ltd. - * www.linaro.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Samsung's S3C2416 flattened device tree enabled machine +// +// Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> +// +// based on mach-exynos/mach-exynos4-dt.c +// +// Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// Copyright (c) 2010-2011 Linaro Ltd. +// www.linaro.org #include <linux/clocksource.h> #include <linux/irqchip.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index 27dd6605e395..18dfef52c8bf 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -1,32 +1,13 @@ -/* linux/arch/arm/mach-s3c2410/mach-smdk2410.c - * - * linux/arch/arm/mach-s3c2410/mach-smdk2410.c - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH - * All rights reserved. - * - * @Author: Jonas Dietsche - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * @History: - * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by - * Ben Dooks <ben@simtec.co.uk> - * - ***********************************************************************/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2004 by FS Forth-Systeme GmbH +// All rights reserved. +// +// @Author: Jonas Dietsche +// +// @History: +// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by +// Ben Dooks <ben@simtec.co.uk> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 586e4a3b8d5d..ca80167f268d 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -1,15 +1,10 @@ -/* linux/arch/arm/mach-s3c2412/mach-smdk2413.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the - * loans of SMDK2413 to work with. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the +// loans of SMDK2413 to work with. #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index 86394f72d29e..61c3e45898d3 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -1,15 +1,9 @@ -/* linux/arch/arm/mach-s3c2416/mach-hanlin_v3c.c - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, +// as part of OpenInkpot project +// Copyright (c) 2009 Promwad Innovation Company +// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 9bb96bfbb420..7bafcd8ea104 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -1,17 +1,12 @@ -/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.fluff.org/ben/smdk2440/ - * - * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// linux/arch/arm/mach-s3c2440/mach-smdk2440.c +// +// Copyright (c) 2004-2005 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://www.fluff.org/ben/smdk2440/ +// +// Thanks to Dimity Andric and TomTom for the loan of an SMDK2440. #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 474cd81aa8ad..2358ed5ed7be 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -1,17 +1,11 @@ -/* linux/arch/arm/mach-s3c2443/mach-smdk2443.c - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.fluff.org/ben/smdk2443/ - * - * Thanks to Samsung for the loan of an SMDK2443 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2007 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://www.fluff.org/ben/smdk2443/ +// +// Thanks to Samsung for the loan of an SMDK2443 #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 2deb62f92fb2..8d8ddd6ea305 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -1,28 +1,11 @@ -/* linux/arch/arm/mach-s3c2410/mach-tct_hammer.c - * - * Copyright (c) 2007 TinCanTools - * David Anders <danders@amltd.com> - - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * @History: - * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by - * Ben Dooks <ben@simtec.co.uk> - * - ***********************************************************************/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2007 TinCanTools +// David Anders <danders@amltd.com> +// +// @History: +// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by +// Ben Dooks <ben@simtec.co.uk> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 89f32bd3f01b..853e74f9b8b5 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -1,15 +1,10 @@ -/* - * Copyright (c) 2003-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Machine support for Thorcom VR1000 board. Designed for Thorcom by - * Simtec Electronics, http://www.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2003-2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// Machine support for Thorcom VR1000 board. Designed for Thorcom by +// Simtec Electronics, http://www.simtec.co.uk/ #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 1adc957edf0f..d76b28b65e65 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -1,13 +1,8 @@ -/* linux/arch/arm/mach-s3c2412/mach-vstms.c - * - * (C) 2006 Thomas Gleixner <tglx@linutronix.de> - * - * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// (C) 2006 Thomas Gleixner <tglx@linutronix.de> +// +// Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/nand-core.h b/arch/arm/mach-s3c24xx/nand-core.h index 7e811fe1cf41..8de633d416ae 100644 --- a/arch/arm/mach-s3c24xx/nand-core.h +++ b/arch/arm/mach-s3c24xx/nand-core.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S3C - Nand Controller core functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_NAND_CORE_H #define __ASM_ARCH_NAND_CORE_H __FILE__ diff --git a/arch/arm/mach-s3c24xx/osiris.h b/arch/arm/mach-s3c24xx/osiris.h index b8d56074abac..b6c9c5ed2ba7 100644 --- a/arch/arm/mach-s3c24xx/osiris.h +++ b/arch/arm/mach-s3c24xx/osiris.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2005 Simtec Electronics * http://www.simtec.co.uk/products/ @@ -5,11 +6,7 @@ * * OSIRIS - CPLD control constants * OSIRIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __MACH_S3C24XX_OSIRIS_H #define __MACH_S3C24XX_OSIRIS_H __FILE__ diff --git a/arch/arm/mach-s3c24xx/otom.h b/arch/arm/mach-s3c24xx/otom.h index 321b7be1c0f7..c800f67d03d4 100644 --- a/arch/arm/mach-s3c24xx/otom.h +++ b/arch/arm/mach-s3c24xx/otom.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * (c) 2005 Guillaume GOURAT / NexVision * guillaume.gourat@nexvision.fr * * NexVision OTOM board memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /* * ok, we've used up to 0x01300000, now we need to find space for the diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c index 7ee4924a543d..0561f79ddce8 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c @@ -1,25 +1,11 @@ -/* - * Copyright (c) 2006-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@arm.linux.org.uk> - * - * S3C2410 CPU PLL tables - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2006-2007 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// Vincent Sanders <vince@arm.linux.org.uk> +// +// S3C2410 CPU PLL tables #include <linux/types.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c index a3fbfed75e28..2ec3a2f9a6a5 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c @@ -1,15 +1,11 @@ -/* - * Copyright (c) 2006-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@arm.linux.org.uk> - * - * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2006-2007 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// Vincent Sanders <vince@arm.linux.org.uk> +// +// S3C2440/S3C2442 CPU PLL tables (12MHz Crystal) #include <linux/types.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c index bcff89fd9871..4b3d9e36c6bb 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c @@ -1,15 +1,11 @@ -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@arm.linux.org.uk> - * - * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2006-2008 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// Vincent Sanders <vince@arm.linux.org.uk> +// +// S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal) #include <linux/types.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c24xx/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S index 6183a688012b..a7bbe336ac6b 100644 --- a/arch/arm/mach-s3c24xx/pm-h1940.S +++ b/arch/arm/mach-s3c24xx/pm-h1940.S @@ -1,22 +1,9 @@ -/* linux/arch/arm/mach-s3c2410/pm-h1940.S - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org> * * H1940 Suspend to RAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ + */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c index a4588daeddb0..2d8ea701380a 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c @@ -1,24 +1,9 @@ -/* linux/arch/arm/mach-s3c2410/pm.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support #include <linux/init.h> #include <linux/suspend.h> diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index 0ae4d47a4663..2dfdaab0aa1f 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c2412/pm.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://armlinux.simtec.co.uk/. #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c index b5bbf0d5985c..9a2f05e279d4 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2416.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c2416/pm.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2010 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support) #include <linux/device.h> #include <linux/syscore_ops.h> diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 5d510bca0844..adcb90645460 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -1,30 +1,15 @@ -/* linux/arch/arm/plat-s3c24xx/pm.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX Power Manager (Suspend-To-RAM) support - * - * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Parts based on arch/arm/mach-pxa/pm.c - * - * Thanks to Dimitry Andric for debugging -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2004-2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// S3C24XX Power Manager (Suspend-To-RAM) support +// +// See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information +// +// Parts based on arch/arm/mach-pxa/pm.c +// +// Thanks to Dimitry Andric for debugging #include <linux/init.h> #include <linux/suspend.h> diff --git a/arch/arm/mach-s3c24xx/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h index 61b3d1387d76..b500636276f2 100644 --- a/arch/arm/mach-s3c24xx/regs-dsc.h +++ b/arch/arm/mach-s3c24xx/regs-dsc.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> * http://www.simtec.co.uk/products/SWLINUX/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * S3C2440/S3C2412 Signal Drive Strength Control -*/ + */ #ifndef __ASM_ARCH_REGS_DSC_H diff --git a/arch/arm/mach-s3c24xx/regs-mem.h b/arch/arm/mach-s3c24xx/regs-mem.h index 86b1258368c2..2f3bc48b5890 100644 --- a/arch/arm/mach-s3c24xx/regs-mem.h +++ b/arch/arm/mach-s3c24xx/regs-mem.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> * http://www.simtec.co.uk/products/SWLINUX/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * S3C2410 Memory Control register definitions */ diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 5061d66ca10c..21fd5404bc98 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410.c - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.simtec.co.uk/products/EB2410ITX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2003-2005 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://www.simtec.co.uk/products/EB2410ITX/ #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412-power.h b/arch/arm/mach-s3c24xx/s3c2412-power.h index 1b02c5ddb31b..0031cfaa1d76 100644 --- a/arch/arm/mach-s3c24xx/s3c2412-power.h +++ b/arch/arm/mach-s3c24xx/s3c2412-power.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index fb5ee8d38913..8fe4d4670dcb 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -1,13 +1,9 @@ -/* - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://armlinux.simtec.co.uk/. #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 621b8648a7ef..1cdb7bd3e713 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -1,26 +1,11 @@ -/* linux/arch/arm/mach-s3c2416/s3c2416.c - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * Samsung S3C2416 Mobile CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, +// as part of OpenInkpot project +// Copyright (c) 2009 Promwad Innovation Company +// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> +// +// Samsung S3C2416 Mobile CPU support #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c index eb733555fab5..451d9851b0a7 100644 --- a/arch/arm/mach-s3c24xx/s3c2440.c +++ b/arch/arm/mach-s3c24xx/s3c2440.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c2440/s3c2440.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2440 Mobile CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2004-2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// Samsung S3C2440 Mobile CPU support #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 893998ede022..432d68325c9d 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -1,25 +1,10 @@ -/* linux/arch/arm/mach-s3c2442/s3c2442.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2442 core and lock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2004-2005 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// +// S3C2442 core and lock support #include <linux/init.h> #include <linux/module.h> diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index b559d378cf43..313e369c3ddd 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c2443/s3c2443.c - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2443 Mobile CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2007 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// Samsung S3C2443 Mobile CPU support #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 31fd273269c2..a75f588b9d45 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2004-2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443) #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/setup-camif.c b/arch/arm/mach-s3c24xx/setup-camif.c index 72d8edb8927a..2b262fae3f61 100644 --- a/arch/arm/mach-s3c24xx/setup-camif.c +++ b/arch/arm/mach-s3c24xx/setup-camif.c @@ -1,12 +1,8 @@ -/* - * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com> - * - * Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com> +// +// Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver #include <linux/gpio.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c index 1852696ca16e..1a01d44b5910 100644 --- a/arch/arm/mach-s3c24xx/setup-i2c.c +++ b/arch/arm/mach-s3c24xx/setup-i2c.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/plat-s3c24xx/setup-i2c.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX Base setup for i2c device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// S3C24XX Base setup for i2c device #include <linux/kernel.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c index c99b0f664db7..218346a36d1e 100644 --- a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c +++ b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/plat-s3c2416/setup-sdhci-gpio.c - * - * Copyright 2010 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * Based on mach-s3c64xx/setup-sdhci-gpio.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2010 Promwad Innovation Company +// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> +// +// S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) +// +// Based on mach-s3c64xx/setup-sdhci-gpio.c #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c index 3d47e023ce94..6c2b96a82da5 100644 --- a/arch/arm/mach-s3c24xx/setup-spi.c +++ b/arch/arm/mach-s3c24xx/setup-spi.c @@ -1,13 +1,9 @@ -/* - * HS-SPI device setup for S3C2443/S3C2416 - * - * Copyright (C) 2011 Samsung Electronics Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// HS-SPI device setup for S3C2443/S3C2416 +// +// Copyright (C) 2011 Samsung Electronics Ltd. +// http://www.samsung.com/ #include <linux/gpio.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c index 46466d20257e..53a14d4f4852 100644 --- a/arch/arm/mach-s3c24xx/setup-ts.c +++ b/arch/arm/mach-s3c24xx/setup-ts.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/plat-s3c24xx/setup-ts.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on S3C24XX setup for i2c device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2010 Samsung Electronics Co., Ltd. +// http://www.samsung.com/ +// +// Based on S3C24XX setup for i2c device #include <linux/kernel.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c index 67cb5120dfeb..12e17f82dae3 100644 --- a/arch/arm/mach-s3c24xx/simtec-audio.c +++ b/arch/arm/mach-s3c24xx/simtec-audio.c @@ -1,15 +1,10 @@ -/* linux/arch/arm/plat-s3c24xx/simtec-audio.c - * - * Copyright (c) 2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Audio setup for various Simtec S3C24XX implementations - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2009 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// +// Audio setup for various Simtec S3C24XX implementations #include <linux/kernel.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c index 8884bffa619a..26b18497e959 100644 --- a/arch/arm/mach-s3c24xx/simtec-nor.c +++ b/arch/arm/mach-s3c24xx/simtec-nor.c @@ -1,15 +1,10 @@ -/* linux/arch/arm/mach-s3c2410/nor-simtec.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Simtec NOR mapping - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2008 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk> +// +// Simtec NOR mapping #include <linux/module.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/simtec-pm.c b/arch/arm/mach-s3c24xx/simtec-pm.c index 38a2f1fdebab..c19074d81389 100644 --- a/arch/arm/mach-s3c24xx/simtec-pm.c +++ b/arch/arm/mach-s3c24xx/simtec-pm.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/plat-s3c24xx/pm-simtec.c - * - * Copyright 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/ - * - * Power Management helpers for Simtec S3C24XX implementations - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2004 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://armlinux.simtec.co.uk/ +// +// Power Management helpers for Simtec S3C24XX implementations #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c index b70aa66efebe..dc1016ffed94 100644 --- a/arch/arm/mach-s3c24xx/simtec-usb.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/mach-s3c2410/usb-simtec.c - * - * Copyright 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.simtec.co.uk/products/EB2410ITX/ - * - * Simtec BAST and Thorcom VR1000 USB port support functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2004-2005 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://www.simtec.co.uk/products/EB2410ITX/ +// +// Simtec BAST and Thorcom VR1000 USB port support functions #define DEBUG diff --git a/arch/arm/mach-s3c24xx/simtec.h b/arch/arm/mach-s3c24xx/simtec.h index ae8f4f9ad2ee..d96bd60872b8 100644 --- a/arch/arm/mach-s3c24xx/simtec.h +++ b/arch/arm/mach-s3c24xx/simtec.h @@ -1,15 +1,11 @@ -/* linux/arch/arm/mach-s3c2410/nor-simtec.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * Simtec common functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ struct s3c24xx_audio_simtec_pdata; diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index 875ba8911127..659f9eff9de2 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -1,5 +1,5 @@ -/* linux/arch/arm/mach-s3c2410/sleep.S - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -8,21 +8,7 @@ * Based on PXA/SA1100 sleep code by: * Nicolas Pitre, (c) 2002 Monta Vista Software Inc * Cliff Brake, (c) 2001 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ + */ #include <linux/linkage.h> #include <linux/serial_s3c.h> diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S index 6bf5b4d8743c..c373f1ca862b 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S @@ -1,24 +1,10 @@ -/* linux/arch/arm/mach-s3c2412/sleep.S - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright (c) 2007 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2412 Power Manager low-level sleep support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ + */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S index b859268fa8da..f0f11ad60c52 100644 --- a/arch/arm/mach-s3c24xx/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep.S @@ -1,5 +1,5 @@ -/* linux/arch/arm/plat-s3c24xx/sleep.S - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -8,21 +8,7 @@ * Based on PXA/SA1100 sleep code by: * Nicolas Pitre, (c) 2002 Monta Vista Software Inc * Cliff Brake, (c) 2001 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ + */ #include <linux/linkage.h> #include <linux/serial_s3c.h> diff --git a/arch/arm/mach-s3c24xx/spi-core.h b/arch/arm/mach-s3c24xx/spi-core.h index 0b9428ab3fc3..bb555ccbe057 100644 --- a/arch/arm/mach-s3c24xx/spi-core.h +++ b/arch/arm/mach-s3c24xx/spi-core.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __PLAT_S3C_SPI_CORE_H diff --git a/arch/arm/mach-s3c24xx/vr1000.h b/arch/arm/mach-s3c24xx/vr1000.h index 7fcd2c2f183c..3cfa296bec2a 100644 --- a/arch/arm/mach-s3c24xx/vr1000.h +++ b/arch/arm/mach-s3c24xx/vr1000.h @@ -1,17 +1,12 @@ - -/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2003 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * VR1000 - CPLD control constants * Machine VR1000 - IRQ Number definitions * Machine VR1000 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __MACH_S3C24XX_VR1000_H #define __MACH_S3C24XX_VR1000_H __FILE__ diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index afd1f20be49e..5700822e3c74 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -1,7 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 +# # Copyright 2008 Openmoko, Inc. # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> -# -# Licensed under GPLv2 + menuconfig ARCH_S3C64XX bool "Samsung S3C64XX" depends on ARCH_MULTI_V6 diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 256cd5b40c60..8caeb4ad17e9 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -1,9 +1,7 @@ -# arch/arm/mach-s3c64xx/Makefile +# SPDX-License-Identifier: GPL-2.0 # # Copyright 2008 Openmoko, Inc. # Copyright 2008 Simtec Electronics -# -# Licensed under GPLv2 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include diff --git a/arch/arm/mach-s3c64xx/ata-core.h b/arch/arm/mach-s3c64xx/ata-core.h index 5951f24a9ec8..6d9a81f759e6 100644 --- a/arch/arm/mach-s3c64xx/ata-core.h +++ b/arch/arm/mach-s3c64xx/ata-core.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Samsung CF-ATA Controller core functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_PLAT_ATA_CORE_H #define __ASM_PLAT_ATA_CORE_H __FILE__ diff --git a/arch/arm/mach-s3c64xx/backlight.h b/arch/arm/mach-s3c64xx/backlight.h index 8dcacac523a2..028663f1cacc 100644 --- a/arch/arm/mach-s3c64xx/backlight.h +++ b/arch/arm/mach-s3c64xx/backlight.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_PLAT_BACKLIGHT_H diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 9843eb4dd04e..13e91074308a 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -1,18 +1,14 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Common Codes for S3C64XX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// Common Codes for S3C64XX machines /* * NOTE: Code in this file is not used when booting with Device Tree support. diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index 4f204668f00e..03670887a764 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -8,10 +9,6 @@ * http://armlinux.simtec.co.uk/ * * Common Header for S3C64XX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c index 5322db51150e..0bac6f6413b0 100644 --- a/arch/arm/mach-s3c64xx/cpuidle.c +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -1,13 +1,8 @@ -/* linux/arch/arm/mach-s3c64xx/cpuidle.c - * - * Copyright (c) 2011 Wolfson Microelectronics, plc - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011 Wolfson Microelectronics, plc +// Copyright (c) 2011 Samsung Electronics Co., Ltd. +// http://www.samsung.com #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-s3c64xx/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h index dcbe17f5e5f8..00d9aa114aa7 100644 --- a/arch/arm/mach-s3c64xx/crag6410.h +++ b/arch/arm/mach-s3c64xx/crag6410.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* Cragganmore 6410 shared definitions * * Copyright 2011 Wolfson Microelectronics plc * Mark Brown <broonie@opensource.wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef MACH_CRAG6410_H diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index cb953e238b2a..e3c49b5d1355 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -1,12 +1,7 @@ -/* linux/arch/arm/plat-s3c/dev-audio.c - * - * Copyright 2009 Wolfson Microelectronics - * Mark Brown <broonie@opensource.wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2009 Wolfson Microelectronics +// Mark Brown <broonie@opensource.wolfsonmicro.com> #include <linux/kernel.h> #include <linux/string.h> diff --git a/arch/arm/mach-s3c64xx/dev-backlight.c b/arch/arm/mach-s3c64xx/dev-backlight.c index 7ef8b9019344..799cfdf0606b 100644 --- a/arch/arm/mach-s3c64xx/dev-backlight.c +++ b/arch/arm/mach-s3c64xx/dev-backlight.c @@ -1,13 +1,9 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common infrastructure for PWM Backlight for Samsung boards - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// Common infrastructure for PWM Backlight for Samsung boards #include <linux/gpio.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c index a0b4f0329811..5fb59ad30008 100644 --- a/arch/arm/mach-s3c64xx/dev-uart.c +++ b/arch/arm/mach-s3c64xx/dev-uart.c @@ -1,17 +1,11 @@ -/* linux/arch/arm/plat-s3c64xx/dev-uart.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Base S3C64XX UART resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// Base S3C64XX UART resource and device definitions #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h index 1d3636512e33..8ed144a0d474 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -5,11 +6,7 @@ * Ben Dooks <ben@simtec.co.uk> * * S3C6400 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef GPIO_SAMSUNG_S3C64XX_H #define GPIO_SAMSUNG_S3C64XX_H diff --git a/arch/arm/mach-s3c64xx/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h index 862d033e57a4..c4ed359474de 100644 --- a/arch/arm/mach-s3c64xx/include/mach/hardware.h +++ b/arch/arm/mach-s3c64xx/include/mach/hardware.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* linux/arch/arm/mach-s3c6400/include/mach/hardware.h * * Copyright 2008 Openmoko, Inc. diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index d51873e8f63f..9372a535b7ba 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -1,16 +1,12 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/map.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C64XX - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H __FILE__ diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index 4a285e97afff..bbf79ed28583 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -1,15 +1,11 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __MACH_S3C64XX_PM_CORE_H diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h index 4f44aac77092..35a68767b318 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h @@ -1,16 +1,12 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * * S3C64XX clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __PLAT_REGS_CLOCK_H #define __PLAT_REGS_CLOCK_H __FILE__ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h index 6a1127891c87..b18c7bcb61c5 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h @@ -1,16 +1,12 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C64XX - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_REGS_IRQ_H #define __ASM_ARCH_REGS_IRQ_H __FILE__ diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index 0bbf1faaee42..31b221190479 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -1,16 +1,11 @@ -/* arch/arm/plat-s3c64xx/irq-pm.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - Interrupt handling Power Management - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// S3C64XX - Interrupt handling Power Management /* * NOTE: Code in this file is not used when booting with Device Tree support. diff --git a/arch/arm/mach-s3c64xx/irq-uart.h b/arch/arm/mach-s3c64xx/irq-uart.h index 4b296132962f..78eccdce95a7 100644 --- a/arch/arm/mach-s3c64xx/irq-uart.h +++ b/arch/arm/mach-s3c64xx/irq-uart.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Header file for Samsung SoC UART IRQ demux for S3C64XX and later - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ struct s3c_uart_irq { void __iomem *regs; diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 347ce6009a8c..0d3d5befb806 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -1,17 +1,11 @@ -/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * Copyright 2009 Kwangwoo Lee - * Kwangwoo Lee <kwangwoo.lee@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// Copyright 2009 Kwangwoo Lee +// Kwangwoo Lee <kwangwoo.lee@gmail.com> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index ea5f2169c850..f00988705408 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -1,12 +1,9 @@ -/* Speyside modules for Cragganmore - board data probing - * - * Copyright 2011 Wolfson Microelectronics plc - * Mark Brown <broonie@opensource.wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Speyside modules for Cragganmore - board data probing +// +// Copyright 2011 Wolfson Microelectronics plc +// Mark Brown <broonie@opensource.wolfsonmicro.com> #include <linux/export.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index d9d0440aed78..f04650297487 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -1,15 +1,10 @@ -/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c - * - * Copyright 2011 Wolfson Microelectronics plc - * Mark Brown <broonie@opensource.wolfsonmicro.com> - * - * Copyright 2011 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2011 Wolfson Microelectronics plc +// Mark Brown <broonie@opensource.wolfsonmicro.com> +// +// Copyright 2011 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> #include <linux/kernel.h> #include <linux/list.h> diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 59b5531f1987..bfe9881d12cc 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -1,12 +1,8 @@ -/* mach-hmt.c - Platform code for Airgoo HMT - * - * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// mach-hmt.c - Platform code for Airgoo HMT +// +// Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk> #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index a3e3e25728b4..0dd36ae49e6a 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -1,16 +1,10 @@ -/* linux/arch/arm/mach-s3c64xx/mach-mini6410.c - * - * Copyright 2010 Darius Augulis <augulis.darius@gmail.com> - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2010 Darius Augulis <augulis.darius@gmail.com> +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ #include <linux/init.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 23baaa04318c..13fea5c86ca3 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -1,13 +1,6 @@ -/* - * linux/arch/arm/mach-s3c64xx/mach-ncp.c - * - * Copyright (C) 2008-2009 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2008-2009 Samsung Electronics #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index d6b3ffd7704b..0ff88b6859c4 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -1,16 +1,10 @@ -/* linux/arch/arm/mach-s3c64xx/mach-real6410.c - * - * Copyright 2010 Darius Augulis <augulis.darius@gmail.com> - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2010 Darius Augulis <augulis.darius@gmail.com> +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ #include <linux/init.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c index 5bf9afae752d..1724f5ea5c46 100644 --- a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c +++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c @@ -1,12 +1,8 @@ -/* - * Samsung's S3C64XX flattened device tree enabled machine - * - * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Samsung's S3C64XX flattened device tree enabled machine +// +// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index e0e1a729ef98..5655fe968b1f 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -1,13 +1,6 @@ -/* - * linux/arch/arm/mach-s3c64xx/mach-smartq.c - * - * Copyright (C) 2010 Maurus Cuelenaere - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2010 Maurus Cuelenaere #include <linux/delay.h> #include <linux/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.h b/arch/arm/mach-s3c64xx/mach-smartq.h index 8e8b693db3af..f98132f4f430 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.h +++ b/arch/arm/mach-s3c64xx/mach-smartq.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * linux/arch/arm/mach-s3c64xx/mach-smartq.h * * Copyright (C) 2010 Maurus Cuelenaere - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __MACH_SMARTQ_H diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index 0972b6ce0ef6..44e9edb144fa 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -1,13 +1,6 @@ -/* - * linux/arch/arm/mach-s3c64xx/mach-smartq5.c - * - * Copyright (C) 2010 Maurus Cuelenaere - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2010 Maurus Cuelenaere #include <linux/fb.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 51ac1c6c654a..815ee7d0b5e3 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -1,13 +1,6 @@ -/* - * linux/arch/arm/mach-s3c64xx/mach-smartq7.c - * - * Copyright (C) 2010 Maurus Cuelenaere - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2010 Maurus Cuelenaere #include <linux/fb.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 7d8a74fd8915..cbd16843c7d1 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -1,13 +1,8 @@ -/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 92ec8c3b42b9..c46fa5dfd2e0 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -1,15 +1,9 @@ -/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c64xx/onenand-core.h b/arch/arm/mach-s3c64xx/onenand-core.h index 925eb13bbb60..0cf6b5e76b24 100644 --- a/arch/arm/mach-s3c64xx/onenand-core.h +++ b/arch/arm/mach-s3c64xx/onenand-core.h @@ -1,14 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2010 Samsung Electronics * Kyungmin Park <kyungmin.park@samsung.com> * Marek Szyprowski <m.szyprowski@samsung.com> * * Samsung OneNAD Controller core functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_ONENAND_CORE_H #define __ASM_ARCH_ONENAND_CORE_H __FILE__ diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c index 66fc774b70ec..152edbeea0c7 100644 --- a/arch/arm/mach-s3c64xx/pl080.c +++ b/arch/arm/mach-s3c64xx/pl080.c @@ -1,12 +1,8 @@ -/* - * Samsung's S3C64XX generic DMA support using amba-pl08x driver. - * - * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Samsung's S3C64XX generic DMA support using amba-pl08x driver. +// +// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> #include <linux/kernel.h> #include <linux/amba/bus.h> diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 2f579be8fe67..fd6dbb263ed5 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/plat-s3c64xx/pm.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX CPU PM support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// S3C64XX CPU PM support. #include <linux/init.h> #include <linux/suspend.h> diff --git a/arch/arm/mach-s3c64xx/regs-modem.h b/arch/arm/mach-s3c64xx/regs-modem.h index 073cdd3a03be..136ad44291bf 100644 --- a/arch/arm/mach-s3c64xx/regs-modem.h +++ b/arch/arm/mach-s3c64xx/regs-modem.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -5,11 +6,7 @@ * Ben Dooks <ben@simtec.co.uk> * * S3C64XX - modem block registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __MACH_S3C64XX_REGS_MODEM_H #define __MACH_S3C64XX_REGS_MODEM_H __FILE__ diff --git a/arch/arm/mach-s3c64xx/regs-srom.h b/arch/arm/mach-s3c64xx/regs-srom.h index d56f3386eb00..2b37988bdf94 100644 --- a/arch/arm/mach-s3c64xx/regs-srom.h +++ b/arch/arm/mach-s3c64xx/regs-srom.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2009 Andy Green <andy@warmcat.com> * * S3C64XX SROM definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __MACH_S3C64XX_REGS_SROM_H #define __MACH_S3C64XX_REGS_SROM_H __FILE__ diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 5ea82accc773..545eea716db8 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -1,13 +1,8 @@ -/* linux/arch/arm/mach-s3c64xx/cpu.c - * - * Copyright 2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2009 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ /* * NOTE: Code in this file is not used when booting with Device Tree support. diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 92bb927c4478..47e04e019624 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c64xx/s3c6410.c - * - * Copyright 2008 Simtec Electronics - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Simtec Electronics +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ /* * NOTE: Code in this file is not used when booting with Device Tree support. diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 9d17bff12d4d..2c7178b26ebb 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/plat-s3c64xx/setup-fb-24bpp.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Base S3C64XX setup information for 24bpp LCD framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// Base S3C64XX setup information for 24bpp LCD framebuffer #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c index 4b8c1cfdd1fc..552eb50da38c 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c0.c +++ b/arch/arm/mach-s3c64xx/setup-i2c0.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Base S3C64XX I2C bus 0 gpio configuration - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// Base S3C64XX I2C bus 0 gpio configuration #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c index cd1df71ee13b..d231f0fc508d 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c1.c +++ b/arch/arm/mach-s3c64xx/setup-i2c1.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Base S3C64XX I2C bus 1 gpio configuration - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// Base S3C64XX I2C bus 1 gpio configuration #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c index 689fb72e715c..810139a807ce 100644 --- a/arch/arm/mach-s3c64xx/setup-ide.c +++ b/arch/arm/mach-s3c64xx/setup-ide.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c64xx/setup-ide.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S3C64XX setup information for IDE - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2010 Samsung Electronics Co., Ltd. +// http://www.samsung.com/ +// +// S3C64XX setup information for IDE #include <linux/kernel.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c index 6ad9a89dfddf..351961025273 100644 --- a/arch/arm/mach-s3c64xx/setup-keypad.c +++ b/arch/arm/mach-s3c64xx/setup-keypad.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/mach-s3c64xx/setup-keypad.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * GPIO configuration for S3C64XX KeyPad device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2010 Samsung Electronics Co., Ltd. +// http://www.samsung.com/ +// +// GPIO configuration for S3C64XX KeyPad device #include <linux/gpio.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c index f426b7a16c16..138455af4937 100644 --- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c +++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c @@ -1,15 +1,10 @@ -/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c index 5fd1a315c901..39dfae1f46e7 100644 --- a/arch/arm/mach-s3c64xx/setup-spi.c +++ b/arch/arm/mach-s3c64xx/setup-spi.c @@ -1,12 +1,7 @@ -/* linux/arch/arm/mach-s3c64xx/setup-spi.c - * - * Copyright (C) 2011 Samsung Electronics Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2011 Samsung Electronics Ltd. +// http://www.samsung.com/ #include <linux/gpio.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c index 2b17b7f5152f..46a9e955607f 100644 --- a/arch/arm/mach-s3c64xx/setup-usb-phy.c +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -1,13 +1,7 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2011 Samsung Electronics Co.Ltd +// Author: Joonyoung Shim <jy0922.shim@samsung.com> #include <linux/clk.h> #include <linux/delay.h> diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index 34313f9c8792..39e16a07a5e4 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* linux/arch/arm/plat-s3c64xx/sleep.S * * Copyright 2008 Openmoko, Inc. @@ -6,11 +7,7 @@ * http://armlinux.simtec.co.uk/ * * S3C64XX CPU sleep code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/mach-s3c64xx/watchdog-reset.h b/arch/arm/mach-s3c64xx/watchdog-reset.h index 42707dfbda9c..1042d6c463dc 100644 --- a/arch/arm/mach-s3c64xx/watchdog-reset.h +++ b/arch/arm/mach-s3c64xx/watchdog-reset.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 - System define for arch_reset() function - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __PLAT_SAMSUNG_WATCHDOG_RESET_H #define __PLAT_SAMSUNG_WATCHDOG_RESET_H diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 4cec11cf5e6f..03984a791879 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -1,9 +1,7 @@ -# arch/arm/mach-s5pv210/Kconfig +# SPDX-License-Identifier: GPL-2.0 # # Copyright (c) 2010 Samsung Electronics Co., Ltd. # http://www.samsung.com/ -# -# Licensed under GPLv2 # Configuration options for the S5PV210/S5PC110 diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index fa7fb716e388..e7b551e18e5c 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -1,9 +1,7 @@ -# arch/arm/mach-s5pv210/Makefile +# SPDX-License-Identifier: GPL-2.0 # # Copyright (c) 2010 Samsung Electronics Co., Ltd. # http://www.samsung.com/ -# -# Licensed under GPLv2 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/arch/arm/plat-samsung/include diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h index 2ad387c1ecf0..0a188134deae 100644 --- a/arch/arm/mach-s5pv210/common.h +++ b/arch/arm/mach-s5pv210/common.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Common Header for S5PV210 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 07cee14a363b..f491249ab658 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -1,18 +1,13 @@ -/* linux/arch/arm/mach-s5pv210/pm.c - * - * Copyright (c) 2010-2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV210 - Power Management support - * - * Based on arch/arm/mach-s3c2410/pm.c - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2010-2014 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// S5PV210 - Power Management support +// +// Based on arch/arm/mach-s3c2410/pm.c +// Copyright (c) 2006 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> #include <linux/init.h> #include <linux/suspend.h> diff --git a/arch/arm/mach-s5pv210/regs-clock.h b/arch/arm/mach-s5pv210/regs-clock.h index fb3eb77412db..2a35c831a9b0 100644 --- a/arch/arm/mach-s5pv210/regs-clock.h +++ b/arch/arm/mach-s5pv210/regs-clock.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5PV210 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_REGS_CLOCK_H #define __ASM_ARCH_REGS_CLOCK_H __FILE__ diff --git a/arch/arm/mach-s5pv210/s5pv210.c b/arch/arm/mach-s5pv210/s5pv210.c index 83e656ea95ae..868f9c20419d 100644 --- a/arch/arm/mach-s5pv210/s5pv210.c +++ b/arch/arm/mach-s5pv210/s5pv210.c @@ -1,14 +1,10 @@ -/* - * Samsung's S5PC110/S5PV210 flattened device tree enabled machine. - * - * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd. - * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> - * Tomasz Figa <t.figa@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Samsung's S5PC110/S5PV210 flattened device tree enabled machine. +// +// Copyright (c) 2013-2014 Samsung Electronics Co., Ltd. +// Mateusz Krawczuk <m.krawczuk@partner.samsung.com> +// Tomasz Figa <t.figa@samsung.com> #include <linux/of_fdt.h> #include <linux/of_platform.h> diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index dfbfc0f7f8b8..81568767f30a 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -5,11 +6,6 @@ * S5PV210 Sleep Code * Based on S3C64XX sleep code by: * Ben Dooks, (c) 2008 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 36e3c79f4973..07df3a59b13f 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -5,6 +5,7 @@ menu "SA11x0 Implementations" config SA1100_ASSABET bool "Assabet" select ARM_SA1110_CPUFREQ + select GPIO_REG help Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Microprocessor Development Board (also known as the Assabet). diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index d28ecb9ef172..f68241d995f2 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/errno.h> +#include <linux/gpio/gpio-reg.h> #include <linux/ioport.h> #include <linux/platform_data/sa11x0-serial.h> #include <linux/serial_core.h> @@ -61,20 +62,45 @@ unsigned long SCR_value = ASSABET_SCR_INIT; EXPORT_SYMBOL(SCR_value); -static unsigned long BCR_value = ASSABET_BCR_DB1110; +static struct gpio_chip *assabet_bcr_gc; + +static const char *assabet_names[] = { + "cf_pwr", "cf_gfx_reset", "nsoft_reset", "irda_fsel", + "irda_md0", "irda_md1", "stereo_loopback", "ncf_bus_on", + "audio_pwr_on", "light_pwr_on", "lcd16data", "lcd_pwr_on", + "rs232_on", "nred_led", "ngreen_led", "vib_on", + "com_dtr", "com_rts", "radio_wake_mod", "i2c_enab", + "tvir_enab", "qmute", "radio_pwr_on", "spkr_off", + "rs232_valid", "com_dcd", "com_cts", "com_dsr", + "radio_cts", "radio_dsr", "radio_dcd", "radio_ri", +}; +/* The old deprecated interface */ void ASSABET_BCR_frob(unsigned int mask, unsigned int val) { - unsigned long flags; + unsigned long m = mask, v = val; - local_irq_save(flags); - BCR_value = (BCR_value & ~mask) | val; - ASSABET_BCR = BCR_value; - local_irq_restore(flags); + assabet_bcr_gc->set_multiple(assabet_bcr_gc, &m, &v); } - EXPORT_SYMBOL(ASSABET_BCR_frob); +static int __init assabet_init_gpio(void __iomem *reg, u32 def_val) +{ + struct gpio_chip *gc; + + writel_relaxed(def_val, reg); + + gc = gpio_reg_init(NULL, reg, -1, 32, "assabet", 0xff000000, def_val, + assabet_names, NULL, NULL); + + if (IS_ERR(gc)) + return PTR_ERR(gc); + + assabet_bcr_gc = gc; + + return gc->base; +} + /* * The codec reset goes to three devices, so we need to release * the rest when any one of these requests it. However, that @@ -146,7 +172,7 @@ static void adv7171_write(unsigned reg, unsigned val) unsigned gpdr = GPDR; unsigned gplr = GPLR; - ASSABET_BCR = BCR_value | ASSABET_BCR_AUDIO_ON; + ASSABET_BCR_frob(ASSABET_BCR_AUDIO_ON, ASSABET_BCR_AUDIO_ON); udelay(100); GPCR = SDA | SCK | MOD; /* clear L3 mode to ensure UDA1341 doesn't respond */ @@ -457,14 +483,6 @@ static void __init assabet_init(void) sa11x0_ppc_configure_mcp(); if (machine_has_neponset()) { - /* - * Angel sets this, but other bootloaders may not. - * - * This must precede any driver calls to BCR_set() - * or BCR_clear(). - */ - ASSABET_BCR = BCR_value = ASSABET_BCR_DB1111; - #ifndef CONFIG_ASSABET_NEPONSET printk( "Warning: Neponset detected but full support " "hasn't been configured in the kernel\n" ); @@ -748,12 +766,31 @@ static int __init assabet_leds_init(void) fs_initcall(assabet_leds_init); #endif +void __init assabet_init_irq(void) +{ + u32 def_val; + + sa1100_init_irq(); + + if (machine_has_neponset()) + def_val = ASSABET_BCR_DB1111; + else + def_val = ASSABET_BCR_DB1110; + + /* + * Angel sets this, but other bootloaders may not. + * + * This must precede any driver calls to BCR_set() or BCR_clear(). + */ + assabet_init_gpio((void *)&ASSABET_BCR, def_val); +} + MACHINE_START(ASSABET, "Intel-Assabet") .atag_offset = 0x100, .fixup = fixup_assabet, .map_io = assabet_map_io, .nr_irqs = SA1100_NR_IRQS, - .init_irq = sa1100_init_irq, + .init_irq = assabet_init_irq, .init_time = sa1100_timer_init, .init_machine = assabet_init, .init_late = sa11x0_init_late, diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index a61a2432766b..b1823f445358 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -3,6 +3,8 @@ * linux/arch/arm/mach-sa1100/neponset.c */ #include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/gpio-reg.h> #include <linux/init.h> #include <linux/ioport.h> #include <linux/irq.h> @@ -45,10 +47,13 @@ #define IRR_USAR (1 << 1) #define IRR_SA1111 (1 << 2) +#define NCR_NGPIO 7 + #define MDM_CTL0_RTS1 (1 << 0) #define MDM_CTL0_DTR1 (1 << 1) #define MDM_CTL0_RTS2 (1 << 2) #define MDM_CTL0_DTR2 (1 << 3) +#define MDM_CTL0_NGPIO 4 #define MDM_CTL1_CTS1 (1 << 0) #define MDM_CTL1_DSR1 (1 << 1) @@ -56,80 +61,87 @@ #define MDM_CTL1_CTS2 (1 << 3) #define MDM_CTL1_DSR2 (1 << 4) #define MDM_CTL1_DCD2 (1 << 5) +#define MDM_CTL1_NGPIO 6 #define AUD_SEL_1341 (1 << 0) #define AUD_MUTE_1341 (1 << 1) +#define AUD_NGPIO 2 extern void sa1110_mb_disable(void); +#define to_neponset_gpio_chip(x) container_of(x, struct neponset_gpio_chip, gc) + +static const char *neponset_ncr_names[] = { + "gp01_off", "tp_power", "ms_power", "enet_osc", + "spi_kb_wk_up", "a0vpp", "a1vpp" +}; + +static const char *neponset_mdmctl0_names[] = { + "rts3", "dtr3", "rts1", "dtr1", +}; + +static const char *neponset_mdmctl1_names[] = { + "cts3", "dsr3", "dcd3", "cts1", "dsr1", "dcd1" +}; + +static const char *neponset_aud_names[] = { + "sel_1341", "mute_1341", +}; + struct neponset_drvdata { void __iomem *base; struct platform_device *sa1111; struct platform_device *smc91x; unsigned irq_base; -#ifdef CONFIG_PM_SLEEP - u32 ncr0; - u32 mdm_ctl_0; -#endif + struct gpio_chip *gpio[4]; }; -static void __iomem *nep_base; +static struct neponset_drvdata *nep; void neponset_ncr_frob(unsigned int mask, unsigned int val) { - void __iomem *base = nep_base; - - if (base) { - unsigned long flags; - unsigned v; - - local_irq_save(flags); - v = readb_relaxed(base + NCR_0); - writeb_relaxed((v & ~mask) | val, base + NCR_0); - local_irq_restore(flags); - } else { - WARN(1, "nep_base unset\n"); - } + struct neponset_drvdata *n = nep; + unsigned long m = mask, v = val; + + if (nep) + n->gpio[0]->set_multiple(n->gpio[0], &m, &v); + else + WARN(1, "nep unset\n"); } EXPORT_SYMBOL(neponset_ncr_frob); static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) { - void __iomem *base = nep_base; - u_int mdm_ctl0; + struct neponset_drvdata *n = nep; + unsigned long mask, val = 0; - if (!base) + if (!n) return; - mdm_ctl0 = readb_relaxed(base + MDM_CTL_0); if (port->mapbase == _Ser1UTCR0) { - if (mctrl & TIOCM_RTS) - mdm_ctl0 &= ~MDM_CTL0_RTS2; - else - mdm_ctl0 |= MDM_CTL0_RTS2; - - if (mctrl & TIOCM_DTR) - mdm_ctl0 &= ~MDM_CTL0_DTR2; - else - mdm_ctl0 |= MDM_CTL0_DTR2; + mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2; + + if (!(mctrl & TIOCM_RTS)) + val |= MDM_CTL0_RTS2; + + if (!(mctrl & TIOCM_DTR)) + val |= MDM_CTL0_DTR2; } else if (port->mapbase == _Ser3UTCR0) { - if (mctrl & TIOCM_RTS) - mdm_ctl0 &= ~MDM_CTL0_RTS1; - else - mdm_ctl0 |= MDM_CTL0_RTS1; - - if (mctrl & TIOCM_DTR) - mdm_ctl0 &= ~MDM_CTL0_DTR1; - else - mdm_ctl0 |= MDM_CTL0_DTR1; + mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1; + + if (!(mctrl & TIOCM_RTS)) + val |= MDM_CTL0_RTS1; + + if (!(mctrl & TIOCM_DTR)) + val |= MDM_CTL0_DTR1; } - writeb_relaxed(mdm_ctl0, base + MDM_CTL_0); + n->gpio[1]->set_multiple(n->gpio[1], &mask, &val); } static u_int neponset_get_mctrl(struct uart_port *port) { - void __iomem *base = nep_base; + void __iomem *base = nep->base; u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; u_int mdm_ctl1; @@ -231,6 +243,22 @@ static struct irq_chip nochip = { .irq_unmask = nochip_noop, }; +static int neponset_init_gpio(struct gpio_chip **gcp, + struct device *dev, const char *label, void __iomem *reg, + unsigned num, bool in, const char *const * names) +{ + struct gpio_chip *gc; + + gc = gpio_reg_init(dev, reg, -1, num, label, in ? 0xffffffff : 0, + readl_relaxed(reg), names, NULL, NULL); + if (IS_ERR(gc)) + return PTR_ERR(gc); + + *gcp = gc; + + return 0; +} + static struct sa1111_platform_data sa1111_info = { .disable_devs = SA1111_DEVID_PS2_MSE, }; @@ -274,7 +302,7 @@ static int neponset_probe(struct platform_device *dev) }; int ret, irq; - if (nep_base) + if (nep) return -EBUSY; irq = ret = platform_get_irq(dev, 0); @@ -330,6 +358,22 @@ static int neponset_probe(struct platform_device *dev) irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); irq_set_chained_handler_and_data(irq, neponset_irq_handler, d); + /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */ + writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0); + + neponset_init_gpio(&d->gpio[0], &dev->dev, "neponset-ncr", + d->base + NCR_0, NCR_NGPIO, false, + neponset_ncr_names); + neponset_init_gpio(&d->gpio[1], &dev->dev, "neponset-mdm-ctl0", + d->base + MDM_CTL_0, MDM_CTL0_NGPIO, false, + neponset_mdmctl0_names); + neponset_init_gpio(&d->gpio[2], &dev->dev, "neponset-mdm-ctl1", + d->base + MDM_CTL_1, MDM_CTL1_NGPIO, true, + neponset_mdmctl1_names); + neponset_init_gpio(&d->gpio[3], &dev->dev, "neponset-aud-ctl", + d->base + AUD_CTL, AUD_NGPIO, false, + neponset_aud_names); + /* * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately * something on the Neponset activates this IRQ on sleep (eth?) @@ -340,16 +384,13 @@ static int neponset_probe(struct platform_device *dev) dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n", d->irq_base, d->irq_base + NEP_IRQ_NR - 1); - nep_base = d->base; + nep = d; sa1100_register_uart_fns(&neponset_port_fns); /* Ensure that the memory bus request/grant signals are setup */ sa1110_mb_disable(); - /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */ - writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0); - sa1111_resources[0].parent = sa1111_res; sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111; sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111; @@ -385,7 +426,7 @@ static int neponset_remove(struct platform_device *dev) platform_device_unregister(d->smc91x); irq_set_chained_handler(irq, NULL); irq_free_descs(d->irq_base, NEP_IRQ_NR); - nep_base = NULL; + nep = NULL; iounmap(d->base); kfree(d); @@ -393,30 +434,22 @@ static int neponset_remove(struct platform_device *dev) } #ifdef CONFIG_PM_SLEEP -static int neponset_suspend(struct device *dev) -{ - struct neponset_drvdata *d = dev_get_drvdata(dev); - - d->ncr0 = readb_relaxed(d->base + NCR_0); - d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0); - - return 0; -} - static int neponset_resume(struct device *dev) { struct neponset_drvdata *d = dev_get_drvdata(dev); + int i, ret = 0; - writeb_relaxed(d->ncr0, d->base + NCR_0); - writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0); + for (i = 0; i < ARRAY_SIZE(d->gpio); i++) { + ret = gpio_reg_resume(d->gpio[i]); + if (ret) + break; + } - return 0; + return ret; } static const struct dev_pm_ops neponset_pm_ops = { - .suspend_noirq = neponset_suspend, .resume_noirq = neponset_resume, - .freeze_noirq = neponset_suspend, .restore_noirq = neponset_resume, }; #define PM_OPS &neponset_pm_ops diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index fd9077a74fce..7f14acf67caf 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -909,6 +909,14 @@ config OUTER_CACHE_SYNC The outer cache has a outer_cache_fns.sync function pointer that can be used to drain the write buffer of the outer cache. +config CACHE_B15_RAC + bool "Enable the Broadcom Brahma-B15 read-ahead cache controller" + depends on ARCH_BRCMSTB + default y + help + This option enables the Broadcom Brahma-B15 read-ahead cache + controller. If disabled, the read-ahead cache remains off. + config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" depends on ARCH_MV78XX0 || ARCH_MVEBU diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 01bcc33f59e3..9dbb84923e12 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -13,7 +13,8 @@ obj-y += nommu.o obj-$(CONFIG_ARM_MPU) += pmsa-v7.o endif -obj-$(CONFIG_ARM_PTDUMP) += dump.o +obj-$(CONFIG_ARM_PTDUMP_CORE) += dump.o +obj-$(CONFIG_ARM_PTDUMP_DEBUGFS) += ptdump_debugfs.o obj-$(CONFIG_MODULES) += proc-syms.o obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o @@ -103,6 +104,7 @@ AFLAGS_proc-v6.o :=-Wa,-march=armv6 AFLAGS_proc-v7.o :=-Wa,-march=armv7-a obj-$(CONFIG_OUTER_CACHE) += l2c-common.o +obj-$(CONFIG_CACHE_B15_RAC) += cache-b15-rac.o obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o obj-$(CONFIG_CACHE_L2X0_PMU) += cache-l2x0-pmu.o diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c new file mode 100644 index 000000000000..d9586ba2e63c --- /dev/null +++ b/arch/arm/mm/cache-b15-rac.c @@ -0,0 +1,356 @@ +/* + * Broadcom Brahma-B15 CPU read-ahead cache management functions + * + * Copyright (C) 2015-2016 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/of_address.h> +#include <linux/notifier.h> +#include <linux/cpu.h> +#include <linux/syscore_ops.h> +#include <linux/reboot.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/cache-b15-rac.h> + +extern void v7_flush_kern_cache_all(void); + +/* RAC register offsets, relative to the HIF_CPU_BIUCTRL register base */ +#define RAC_CONFIG0_REG (0x78) +#define RACENPREF_MASK (0x3) +#define RACPREFINST_SHIFT (0) +#define RACENINST_SHIFT (2) +#define RACPREFDATA_SHIFT (4) +#define RACENDATA_SHIFT (6) +#define RAC_CPU_SHIFT (8) +#define RACCFG_MASK (0xff) +#define RAC_CONFIG1_REG (0x7c) +#define RAC_FLUSH_REG (0x80) +#define FLUSH_RAC (1 << 0) + +/* Bitmask to enable instruction and data prefetching with a 256-bytes stride */ +#define RAC_DATA_INST_EN_MASK (1 << RACPREFINST_SHIFT | \ + RACENPREF_MASK << RACENINST_SHIFT | \ + 1 << RACPREFDATA_SHIFT | \ + RACENPREF_MASK << RACENDATA_SHIFT) + +#define RAC_ENABLED 0 +/* Special state where we want to bypass the spinlock and call directly + * into the v7 cache maintenance operations during suspend/resume + */ +#define RAC_SUSPENDED 1 + +static void __iomem *b15_rac_base; +static DEFINE_SPINLOCK(rac_lock); + +static u32 rac_config0_reg; + +/* Initialization flag to avoid checking for b15_rac_base, and to prevent + * multi-platform kernels from crashing here as well. + */ +static unsigned long b15_rac_flags; + +static inline u32 __b15_rac_disable(void) +{ + u32 val = __raw_readl(b15_rac_base + RAC_CONFIG0_REG); + __raw_writel(0, b15_rac_base + RAC_CONFIG0_REG); + dmb(); + return val; +} + +static inline void __b15_rac_flush(void) +{ + u32 reg; + + __raw_writel(FLUSH_RAC, b15_rac_base + RAC_FLUSH_REG); + do { + /* This dmb() is required to force the Bus Interface Unit + * to clean oustanding writes, and forces an idle cycle + * to be inserted. + */ + dmb(); + reg = __raw_readl(b15_rac_base + RAC_FLUSH_REG); + } while (reg & FLUSH_RAC); +} + +static inline u32 b15_rac_disable_and_flush(void) +{ + u32 reg; + + reg = __b15_rac_disable(); + __b15_rac_flush(); + return reg; +} + +static inline void __b15_rac_enable(u32 val) +{ + __raw_writel(val, b15_rac_base + RAC_CONFIG0_REG); + /* dsb() is required here to be consistent with __flush_icache_all() */ + dsb(); +} + +#define BUILD_RAC_CACHE_OP(name, bar) \ +void b15_flush_##name(void) \ +{ \ + unsigned int do_flush; \ + u32 val = 0; \ + \ + if (test_bit(RAC_SUSPENDED, &b15_rac_flags)) { \ + v7_flush_##name(); \ + bar; \ + return; \ + } \ + \ + spin_lock(&rac_lock); \ + do_flush = test_bit(RAC_ENABLED, &b15_rac_flags); \ + if (do_flush) \ + val = b15_rac_disable_and_flush(); \ + v7_flush_##name(); \ + if (!do_flush) \ + bar; \ + else \ + __b15_rac_enable(val); \ + spin_unlock(&rac_lock); \ +} + +#define nobarrier + +/* The readahead cache present in the Brahma-B15 CPU is a special piece of + * hardware after the integrated L2 cache of the B15 CPU complex whose purpose + * is to prefetch instruction and/or data with a line size of either 64 bytes + * or 256 bytes. The rationale is that the data-bus of the CPU interface is + * optimized for 256-bytes transactions, and enabling the readahead cache + * provides a significant performance boost we want it enabled (typically + * twice the performance for a memcpy benchmark application). + * + * The readahead cache is transparent for Modified Virtual Addresses + * cache maintenance operations: ICIMVAU, DCIMVAC, DCCMVAC, DCCMVAU and + * DCCIMVAC. + * + * It is however not transparent for the following cache maintenance + * operations: DCISW, DCCSW, DCCISW, ICIALLUIS and ICIALLU which is precisely + * what we are patching here with our BUILD_RAC_CACHE_OP here. + */ +BUILD_RAC_CACHE_OP(kern_cache_all, nobarrier); + +static void b15_rac_enable(void) +{ + unsigned int cpu; + u32 enable = 0; + + for_each_possible_cpu(cpu) + enable |= (RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT)); + + b15_rac_disable_and_flush(); + __b15_rac_enable(enable); +} + +static int b15_rac_reboot_notifier(struct notifier_block *nb, + unsigned long action, + void *data) +{ + /* During kexec, we are not yet migrated on the boot CPU, so we need to + * make sure we are SMP safe here. Once the RAC is disabled, flag it as + * suspended such that the hotplug notifier returns early. + */ + if (action == SYS_RESTART) { + spin_lock(&rac_lock); + b15_rac_disable_and_flush(); + clear_bit(RAC_ENABLED, &b15_rac_flags); + set_bit(RAC_SUSPENDED, &b15_rac_flags); + spin_unlock(&rac_lock); + } + + return NOTIFY_DONE; +} + +static struct notifier_block b15_rac_reboot_nb = { + .notifier_call = b15_rac_reboot_notifier, +}; + +/* The CPU hotplug case is the most interesting one, we basically need to make + * sure that the RAC is disabled for the entire system prior to having a CPU + * die, in particular prior to this dying CPU having exited the coherency + * domain. + * + * Once this CPU is marked dead, we can safely re-enable the RAC for the + * remaining CPUs in the system which are still online. + * + * Offlining a CPU is the problematic case, onlining a CPU is not much of an + * issue since the CPU and its cache-level hierarchy will start filling with + * the RAC disabled, so L1 and L2 only. + * + * In this function, we should NOT have to verify any unsafe setting/condition + * b15_rac_base: + * + * It is protected by the RAC_ENABLED flag which is cleared by default, and + * being cleared when initial procedure is done. b15_rac_base had been set at + * that time. + * + * RAC_ENABLED: + * There is a small timing windows, in b15_rac_init(), between + * cpuhp_setup_state_*() + * ... + * set RAC_ENABLED + * However, there is no hotplug activity based on the Linux booting procedure. + * + * Since we have to disable RAC for all cores, we keep RAC on as long as as + * possible (disable it as late as possible) to gain the cache benefit. + * + * Thus, dying/dead states are chosen here + * + * We are choosing not do disable the RAC on a per-CPU basis, here, if we did + * we would want to consider disabling it as early as possible to benefit the + * other active CPUs. + */ + +/* Running on the dying CPU */ +static int b15_rac_dying_cpu(unsigned int cpu) +{ + /* During kexec/reboot, the RAC is disabled via the reboot notifier + * return early here. + */ + if (test_bit(RAC_SUSPENDED, &b15_rac_flags)) + return 0; + + spin_lock(&rac_lock); + + /* Indicate that we are starting a hotplug procedure */ + __clear_bit(RAC_ENABLED, &b15_rac_flags); + + /* Disable the readahead cache and save its value to a global */ + rac_config0_reg = b15_rac_disable_and_flush(); + + spin_unlock(&rac_lock); + + return 0; +} + +/* Running on a non-dying CPU */ +static int b15_rac_dead_cpu(unsigned int cpu) +{ + /* During kexec/reboot, the RAC is disabled via the reboot notifier + * return early here. + */ + if (test_bit(RAC_SUSPENDED, &b15_rac_flags)) + return 0; + + spin_lock(&rac_lock); + + /* And enable it */ + __b15_rac_enable(rac_config0_reg); + __set_bit(RAC_ENABLED, &b15_rac_flags); + + spin_unlock(&rac_lock); + + return 0; +} + +static int b15_rac_suspend(void) +{ + /* Suspend the read-ahead cache oeprations, forcing our cache + * implementation to fallback to the regular ARMv7 calls. + * + * We are guaranteed to be running on the boot CPU at this point and + * with every other CPU quiesced, so setting RAC_SUSPENDED is not racy + * here. + */ + rac_config0_reg = b15_rac_disable_and_flush(); + set_bit(RAC_SUSPENDED, &b15_rac_flags); + + return 0; +} + +static void b15_rac_resume(void) +{ + /* Coming out of a S3 suspend/resume cycle, the read-ahead cache + * register RAC_CONFIG0_REG will be restored to its default value, make + * sure we re-enable it and set the enable flag, we are also guaranteed + * to run on the boot CPU, so not racy again. + */ + __b15_rac_enable(rac_config0_reg); + clear_bit(RAC_SUSPENDED, &b15_rac_flags); +} + +static struct syscore_ops b15_rac_syscore_ops = { + .suspend = b15_rac_suspend, + .resume = b15_rac_resume, +}; + +static int __init b15_rac_init(void) +{ + struct device_node *dn; + int ret = 0, cpu; + u32 reg, en_mask = 0; + + dn = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl"); + if (!dn) + return -ENODEV; + + if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n")) + goto out; + + b15_rac_base = of_iomap(dn, 0); + if (!b15_rac_base) { + pr_err("failed to remap BIU control base\n"); + ret = -ENOMEM; + goto out; + } + + ret = register_reboot_notifier(&b15_rac_reboot_nb); + if (ret) { + pr_err("failed to register reboot notifier\n"); + iounmap(b15_rac_base); + goto out; + } + + if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) { + ret = cpuhp_setup_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DEAD, + "arm/cache-b15-rac:dead", + NULL, b15_rac_dead_cpu); + if (ret) + goto out_unmap; + + ret = cpuhp_setup_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DYING, + "arm/cache-b15-rac:dying", + NULL, b15_rac_dying_cpu); + if (ret) + goto out_cpu_dead; + } + + if (IS_ENABLED(CONFIG_PM_SLEEP)) + register_syscore_ops(&b15_rac_syscore_ops); + + spin_lock(&rac_lock); + reg = __raw_readl(b15_rac_base + RAC_CONFIG0_REG); + for_each_possible_cpu(cpu) + en_mask |= ((1 << RACPREFDATA_SHIFT) << (cpu * RAC_CPU_SHIFT)); + WARN(reg & en_mask, "Read-ahead cache not previously disabled\n"); + + b15_rac_enable(); + set_bit(RAC_ENABLED, &b15_rac_flags); + spin_unlock(&rac_lock); + + pr_info("Broadcom Brahma-B15 readahead cache at: 0x%p\n", + b15_rac_base + RAC_CONFIG0_REG); + + goto out; + +out_cpu_dead: + cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DYING); +out_unmap: + unregister_reboot_notifier(&b15_rac_reboot_nb); + iounmap(b15_rac_base); +out: + of_node_put(dn); + return ret; +} +arch_initcall(b15_rac_init); diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index de78109d002d..215df435bfb9 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -15,6 +15,7 @@ #include <asm/assembler.h> #include <asm/errno.h> #include <asm/unwind.h> +#include <asm/hardware/cache-b15-rac.h> #include "proc-macros.S" @@ -446,3 +447,23 @@ ENDPROC(v7_dma_unmap_area) @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) define_cache_functions v7 + + /* The Broadcom Brahma-B15 read-ahead cache requires some modifications + * to the v7_cache_fns, we only override the ones we need + */ +#ifndef CONFIG_CACHE_B15_RAC + globl_equ b15_flush_kern_cache_all, v7_flush_kern_cache_all +#endif + globl_equ b15_flush_icache_all, v7_flush_icache_all + globl_equ b15_flush_kern_cache_louis, v7_flush_kern_cache_louis + globl_equ b15_flush_user_cache_all, v7_flush_user_cache_all + globl_equ b15_flush_user_cache_range, v7_flush_user_cache_range + globl_equ b15_coherent_kern_range, v7_coherent_kern_range + globl_equ b15_coherent_user_range, v7_coherent_user_range + globl_equ b15_flush_kern_dcache_area, v7_flush_kern_dcache_area + + globl_equ b15_dma_map_area, v7_dma_map_area + globl_equ b15_dma_unmap_area, v7_dma_unmap_area + globl_equ b15_dma_flush_range, v7_dma_flush_range + + define_cache_functions b15 diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c index 6db5fc26d154..619f24a42d09 100644 --- a/arch/arm/mm/dma-mapping-nommu.c +++ b/arch/arm/mm/dma-mapping-nommu.c @@ -11,7 +11,7 @@ #include <linux/export.h> #include <linux/mm.h> -#include <linux/dma-mapping.h> +#include <linux/dma-direct.h> #include <linux/scatterlist.h> #include <asm/cachetype.h> @@ -22,7 +22,7 @@ #include "dma.h" /* - * dma_noop_ops is used if + * dma_direct_ops is used if * - MMU/MPU is off * - cpu is v7m w/o cache support * - device is coherent @@ -39,7 +39,6 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size, unsigned long attrs) { - const struct dma_map_ops *ops = &dma_noop_ops; void *ret; /* @@ -48,7 +47,7 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size, */ if (attrs & DMA_ATTR_NON_CONSISTENT) - return ops->alloc(dev, size, dma_handle, gfp, attrs); + return dma_direct_alloc(dev, size, dma_handle, gfp, attrs); ret = dma_alloc_from_global_coherent(size, dma_handle); @@ -70,10 +69,8 @@ static void arm_nommu_dma_free(struct device *dev, size_t size, void *cpu_addr, dma_addr_t dma_addr, unsigned long attrs) { - const struct dma_map_ops *ops = &dma_noop_ops; - if (attrs & DMA_ATTR_NON_CONSISTENT) { - ops->free(dev, size, cpu_addr, dma_addr, attrs); + dma_direct_free(dev, size, cpu_addr, dma_addr, attrs); } else { int ret = dma_release_from_global_coherent(get_order(size), cpu_addr); @@ -213,7 +210,7 @@ EXPORT_SYMBOL(arm_nommu_dma_ops); static const struct dma_map_ops *arm_nommu_get_dma_map_ops(bool coherent) { - return coherent ? &dma_noop_ops : &arm_nommu_dma_ops; + return coherent ? &dma_direct_ops : &arm_nommu_dma_ops; } void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c index fc3b44028cfb..084779c5c893 100644 --- a/arch/arm/mm/dump.c +++ b/arch/arm/mm/dump.c @@ -21,11 +21,7 @@ #include <asm/fixmap.h> #include <asm/memory.h> #include <asm/pgtable.h> - -struct addr_marker { - unsigned long start_address; - const char *name; -}; +#include <asm/ptdump.h> static struct addr_marker address_markers[] = { { MODULES_VADDR, "Modules" }, @@ -38,12 +34,26 @@ static struct addr_marker address_markers[] = { { -1, NULL }, }; +#define pt_dump_seq_printf(m, fmt, args...) \ +({ \ + if (m) \ + seq_printf(m, fmt, ##args); \ +}) + +#define pt_dump_seq_puts(m, fmt) \ +({ \ + if (m) \ + seq_printf(m, fmt); \ +}) + struct pg_state { struct seq_file *seq; const struct addr_marker *marker; unsigned long start_address; unsigned level; u64 current_prot; + bool check_wx; + unsigned long wx_pages; const char *current_domain; }; @@ -52,6 +62,8 @@ struct prot_bits { u64 val; const char *set; const char *clear; + bool ro_bit; + bool nx_bit; }; static const struct prot_bits pte_bits[] = { @@ -65,11 +77,13 @@ static const struct prot_bits pte_bits[] = { .val = L_PTE_RDONLY, .set = "ro", .clear = "RW", + .ro_bit = true, }, { .mask = L_PTE_XN, .val = L_PTE_XN, .set = "NX", .clear = "x ", + .nx_bit = true, }, { .mask = L_PTE_SHARED, .val = L_PTE_SHARED, @@ -133,11 +147,13 @@ static const struct prot_bits section_bits[] = { .val = L_PMD_SECT_RDONLY | PMD_SECT_AP2, .set = "ro", .clear = "RW", + .ro_bit = true, #elif __LINUX_ARM_ARCH__ >= 6 { .mask = PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE, .val = PMD_SECT_APX | PMD_SECT_AP_WRITE, .set = " ro", + .ro_bit = true, }, { .mask = PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE, .val = PMD_SECT_AP_WRITE, @@ -156,6 +172,7 @@ static const struct prot_bits section_bits[] = { .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE, .val = 0, .set = " ro", + .ro_bit = true, }, { .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE, .val = PMD_SECT_AP_WRITE, @@ -174,6 +191,7 @@ static const struct prot_bits section_bits[] = { .val = PMD_SECT_XN, .set = "NX", .clear = "x ", + .nx_bit = true, }, { .mask = PMD_SECT_S, .val = PMD_SECT_S, @@ -186,6 +204,8 @@ struct pg_level { const struct prot_bits *bits; size_t num; u64 mask; + const struct prot_bits *ro_bit; + const struct prot_bits *nx_bit; }; static struct pg_level pg_level[] = { @@ -214,10 +234,27 @@ static void dump_prot(struct pg_state *st, const struct prot_bits *bits, size_t s = bits->clear; if (s) - seq_printf(st->seq, " %s", s); + pt_dump_seq_printf(st->seq, " %s", s); } } +static void note_prot_wx(struct pg_state *st, unsigned long addr) +{ + if (!st->check_wx) + return; + if ((st->current_prot & pg_level[st->level].ro_bit->mask) == + pg_level[st->level].ro_bit->val) + return; + if ((st->current_prot & pg_level[st->level].nx_bit->mask) == + pg_level[st->level].nx_bit->val) + return; + + WARN_ONCE(1, "arm/mm: Found insecure W+X mapping at address %pS\n", + (void *)st->start_address); + + st->wx_pages += (addr - st->start_address) / PAGE_SIZE; +} + static void note_page(struct pg_state *st, unsigned long addr, unsigned int level, u64 val, const char *domain) { @@ -228,7 +265,7 @@ static void note_page(struct pg_state *st, unsigned long addr, st->level = level; st->current_prot = prot; st->current_domain = domain; - seq_printf(st->seq, "---[ %s ]---\n", st->marker->name); + pt_dump_seq_printf(st->seq, "---[ %s ]---\n", st->marker->name); } else if (prot != st->current_prot || level != st->level || domain != st->current_domain || addr >= st->marker[1].start_address) { @@ -236,7 +273,8 @@ static void note_page(struct pg_state *st, unsigned long addr, unsigned long delta; if (st->current_prot) { - seq_printf(st->seq, "0x%08lx-0x%08lx ", + note_prot_wx(st, addr); + pt_dump_seq_printf(st->seq, "0x%08lx-0x%08lx ", st->start_address, addr); delta = (addr - st->start_address) >> 10; @@ -244,17 +282,19 @@ static void note_page(struct pg_state *st, unsigned long addr, delta >>= 10; unit++; } - seq_printf(st->seq, "%9lu%c", delta, *unit); + pt_dump_seq_printf(st->seq, "%9lu%c", delta, *unit); if (st->current_domain) - seq_printf(st->seq, " %s", st->current_domain); + pt_dump_seq_printf(st->seq, " %s", + st->current_domain); if (pg_level[st->level].bits) dump_prot(st, pg_level[st->level].bits, pg_level[st->level].num); - seq_printf(st->seq, "\n"); + pt_dump_seq_printf(st->seq, "\n"); } if (addr >= st->marker[1].start_address) { st->marker++; - seq_printf(st->seq, "---[ %s ]---\n", st->marker->name); + pt_dump_seq_printf(st->seq, "---[ %s ]---\n", + st->marker->name); } st->start_address = addr; st->current_prot = prot; @@ -335,61 +375,82 @@ static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start) } } -static void walk_pgd(struct seq_file *m) +static void walk_pgd(struct pg_state *st, struct mm_struct *mm, + unsigned long start) { - pgd_t *pgd = swapper_pg_dir; - struct pg_state st; - unsigned long addr; + pgd_t *pgd = pgd_offset(mm, 0UL); unsigned i; - - memset(&st, 0, sizeof(st)); - st.seq = m; - st.marker = address_markers; + unsigned long addr; for (i = 0; i < PTRS_PER_PGD; i++, pgd++) { - addr = i * PGDIR_SIZE; + addr = start + i * PGDIR_SIZE; if (!pgd_none(*pgd)) { - walk_pud(&st, pgd, addr); + walk_pud(st, pgd, addr); } else { - note_page(&st, addr, 1, pgd_val(*pgd), NULL); + note_page(st, addr, 1, pgd_val(*pgd), NULL); } } - - note_page(&st, 0, 0, 0, NULL); } -static int ptdump_show(struct seq_file *m, void *v) +void ptdump_walk_pgd(struct seq_file *m, struct ptdump_info *info) { - walk_pgd(m); - return 0; -} + struct pg_state st = { + .seq = m, + .marker = info->markers, + .check_wx = false, + }; -static int ptdump_open(struct inode *inode, struct file *file) -{ - return single_open(file, ptdump_show, NULL); + walk_pgd(&st, info->mm, info->base_addr); + note_page(&st, 0, 0, 0, NULL); } -static const struct file_operations ptdump_fops = { - .open = ptdump_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int ptdump_init(void) +static void ptdump_initialize(void) { - struct dentry *pe; unsigned i, j; for (i = 0; i < ARRAY_SIZE(pg_level); i++) if (pg_level[i].bits) - for (j = 0; j < pg_level[i].num; j++) + for (j = 0; j < pg_level[i].num; j++) { pg_level[i].mask |= pg_level[i].bits[j].mask; + if (pg_level[i].bits[j].ro_bit) + pg_level[i].ro_bit = &pg_level[i].bits[j]; + if (pg_level[i].bits[j].nx_bit) + pg_level[i].nx_bit = &pg_level[i].bits[j]; + } address_markers[2].start_address = VMALLOC_START; +} + +static struct ptdump_info kernel_ptdump_info = { + .mm = &init_mm, + .markers = address_markers, + .base_addr = 0, +}; - pe = debugfs_create_file("kernel_page_tables", 0400, NULL, NULL, - &ptdump_fops); - return pe ? 0 : -ENOMEM; +void ptdump_check_wx(void) +{ + struct pg_state st = { + .seq = NULL, + .marker = (struct addr_marker[]) { + { 0, NULL}, + { -1, NULL}, + }, + .check_wx = true, + }; + + walk_pgd(&st, &init_mm, 0); + note_page(&st, 0, 0, 0, NULL); + if (st.wx_pages) + pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found\n", + st.wx_pages); + else + pr_info("Checked W+X mappings: passed, no W+X pages found\n"); +} + +static int ptdump_init(void) +{ + ptdump_initialize(); + return ptdump_debugfs_register(&kernel_ptdump_info, + "kernel_page_tables"); } __initcall(ptdump_init); diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 42f585379e19..b75eada23d0a 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -21,7 +21,6 @@ #include <linux/highmem.h> #include <linux/perf_event.h> -#include <asm/exception.h> #include <asm/pgtable.h> #include <asm/system_misc.h> #include <asm/system_info.h> @@ -545,7 +544,7 @@ hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *) /* * Dispatch a data abort to the relevant handler. */ -asmlinkage void __exception +asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { const struct fsr_info *inf = fsr_info + fsr_fs(fsr); @@ -578,7 +577,7 @@ hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs * ifsr_info[nr].name = name; } -asmlinkage void __exception +asmlinkage void do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) { const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr); diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 10bfba85eb96..1d1edd064199 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -16,8 +16,8 @@ * are not supported on any CPU using the idmap tables as its current * page tables. */ -pgd_t *idmap_pgd; -long long arch_phys_to_idmap_offset; +pgd_t *idmap_pgd __ro_after_init; +long long arch_phys_to_idmap_offset __ro_after_init; #ifdef CONFIG_ARM_LPAE static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index a1f11a7ee81b..bd6f4513539a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -36,6 +36,7 @@ #include <asm/system_info.h> #include <asm/tlb.h> #include <asm/fixmap.h> +#include <asm/ptdump.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -738,6 +739,7 @@ static int __mark_rodata_ro(void *unused) void mark_rodata_ro(void) { stop_machine(__mark_rodata_ro, NULL, NULL); + debug_checkwx(); } void set_kernel_text_rw(void) diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index e4370810f4f1..7c087961b7ce 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -31,7 +31,7 @@ struct mpu_rgn_info mpu_rgn_info; #ifdef CONFIG_CPU_CP15 #ifdef CONFIG_CPU_HIGH_VECTOR -static unsigned long __init setup_vectors_base(void) +unsigned long setup_vectors_base(void) { unsigned long reg = get_cr(); @@ -57,7 +57,7 @@ static inline bool security_extensions_enabled(void) return 0; } -static unsigned long __init setup_vectors_base(void) +unsigned long setup_vectors_base(void) { unsigned long base = 0, reg = get_cr(); diff --git a/arch/arm/mm/pmsa-v7.c b/arch/arm/mm/pmsa-v7.c index 976df60ac426..e2853bfff74e 100644 --- a/arch/arm/mm/pmsa-v7.c +++ b/arch/arm/mm/pmsa-v7.c @@ -6,6 +6,7 @@ #include <linux/bitops.h> #include <linux/memblock.h> +#include <linux/string.h> #include <asm/cacheflush.h> #include <asm/cp15.h> @@ -296,6 +297,7 @@ void __init adjust_lowmem_bounds_mpu(void) } } + memset(mem, 0, sizeof(mem)); num = allocate_region(mem_start, specified_mem_size, mem_max_regions, mem); for (i = 0; i < num; i++) { @@ -433,7 +435,7 @@ void __init mpu_setup(void) /* Background */ err |= mpu_setup_region(region++, 0, 32, - MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA, + MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0RW, 0, false); #ifdef CONFIG_XIP_KERNEL diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 01d64c0b2563..d55d493f9a1e 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -567,7 +567,7 @@ __v7_setup_stack: /* * Standard v7 proc info content */ -.macro __v7_proc name, initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions +.macro __v7_proc name, initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions, cache_fns = v7_cache_fns ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags) ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ @@ -583,7 +583,7 @@ __v7_setup_stack: .long \proc_fns .long v7wbi_tlb_fns .long v6_user_fns - .long v7_cache_fns + .long \cache_fns .endm #ifndef CONFIG_ARM_LPAE @@ -678,7 +678,7 @@ __v7_ca15mp_proc_info: __v7_b15mp_proc_info: .long 0x420f00f0 .long 0xff0ffff0 - __v7_proc __v7_b15mp_proc_info, __v7_b15mp_setup + __v7_proc __v7_b15mp_proc_info, __v7_b15mp_setup, cache_fns = b15_cache_fns .size __v7_b15mp_proc_info, . - __v7_b15mp_proc_info /* diff --git a/arch/arm/mm/ptdump_debugfs.c b/arch/arm/mm/ptdump_debugfs.c new file mode 100644 index 000000000000..be8d87be4b93 --- /dev/null +++ b/arch/arm/mm/ptdump_debugfs.c @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +#include <asm/ptdump.h> + +static int ptdump_show(struct seq_file *m, void *v) +{ + struct ptdump_info *info = m->private; + + ptdump_walk_pgd(m, info); + return 0; +} + +static int ptdump_open(struct inode *inode, struct file *file) +{ + return single_open(file, ptdump_show, inode->i_private); +} + +static const struct file_operations ptdump_fops = { + .open = ptdump_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +int ptdump_debugfs_register(struct ptdump_info *info, const char *name) +{ + struct dentry *pe; + + pe = debugfs_create_file(name, 0400, NULL, info, &ptdump_fops); + return pe ? 0 : -ENOMEM; + +} diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 323a4df59a6c..b5030e1a41d8 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -25,8 +25,6 @@ #include "bpf_jit_32.h" -int bpf_jit_enable __read_mostly; - /* * eBPF prog stack layout: * @@ -365,15 +363,7 @@ static inline int epilogue_offset(const struct jit_ctx *ctx) static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op) { const u8 *tmp = bpf2a32[TMP_REG_1]; - s32 jmp_offset; - /* checks if divisor is zero or not. If it is, then - * exit directly. - */ - emit(ARM_CMP_I(rn, 0), ctx); - _emit(ARM_COND_EQ, ARM_MOV_I(ARM_R0, 0), ctx); - jmp_offset = epilogue_offset(ctx); - _emit(ARM_COND_EQ, ARM_B(jmp_offset), ctx); #if __LINUX_ARM_ARCH__ == 7 if (elf_hwcap & HWCAP_IDIVA) { if (op == BPF_DIV) @@ -1821,7 +1811,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) /* If BPF JIT was not enabled then we must fall back to * the interpreter. */ - if (!bpf_jit_enable) + if (!prog->jit_requested) return orig_prog; /* If constant blinding was enabled and we failed during blinding diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 8d4a64cc644c..b600e38364eb 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -1,8 +1,6 @@ -# arch/arm/plat-samsung/Kconfig +# SPDX-License-Identifier: GPL-2.0 # # Copyright 2009 Simtec Electronics -# -# Licensed under GPLv2 config PLAT_SAMSUNG bool diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index be172efec15c..3db9d2c38258 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -1,8 +1,6 @@ -# arch/arm/plat-samsung/Makefile +# SPDX-License-Identifier: GPL-2.0 # # Copyright 2009 Simtec Electronics -# -# Licensed under GPLv2 ccflags-$(CONFIG_ARCH_S3C64XX) := -I$(srctree)/arch/arm/mach-s3c64xx/include ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index e9de9e92ce01..42bac8d5ab5d 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -1,15 +1,10 @@ -/* arch/arm/plat-samsung/adc.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> - * - * Samsung ADC device core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ +// SPDX-License-Identifier: GPL-1.0+ +// +// Copyright (c) 2008 Simtec Electronics +// http://armlinux.simtec.co.uk/ +// Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> +// +// Samsung ADC device core #include <linux/module.h> #include <linux/kernel.h> diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c index a107b3a0b095..e1ba88ba31d8 100644 --- a/arch/arm/plat-samsung/cpu.c +++ b/arch/arm/plat-samsung/cpu.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/plat-samsung/cpu.c - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung CPU Support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// Samsung CPU Support #include <linux/module.h> #include <linux/kernel.h> diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c index 5928105490fa..7476a5dbae77 100644 --- a/arch/arm/plat-samsung/dev-uart.c +++ b/arch/arm/plat-samsung/dev-uart.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/plat-samsung/dev-uart.c - * originally from arch/arm/plat-s3c24xx/devs.c - *x - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Base S3C24XX platform device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// originally from arch/arm/plat-s3c24xx/devs.c +// +// Copyright (c) 2004 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// Base S3C24XX platform device definitions #include <linux/kernel.h> #include <linux/platform_device.h> diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 5668e4eb03df..1d1fa068d228 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1,14 +1,9 @@ -/* linux/arch/arm/plat-samsung/devs.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Base SAMSUNG platform device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// Base SAMSUNG platform device definitions #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c index 7861488f7ca0..f66c820cd82b 100644 --- a/arch/arm/plat-samsung/gpio-samsung.c +++ b/arch/arm/plat-samsung/gpio-samsung.c @@ -1,18 +1,14 @@ -/* - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * SAMSUNG - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. +// http://www.samsung.com/ +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// SAMSUNG - GPIOlib support #include <linux/kernel.h> #include <linux/irq.h> diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/plat-samsung/include/plat/adc-core.h index a927bee55359..039f6862b6a7 100644 --- a/arch/arm/plat-samsung/include/plat/adc-core.h +++ b/arch/arm/plat-samsung/include/plat/adc-core.h @@ -1,14 +1,10 @@ -/* linux/arch/arm/plat-samsung/include/plat/adc-core.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * Samsung ADC Controller core functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_PLAT_ADC_CORE_H #define __ASM_PLAT_ADC_CORE_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h index 2fc89315553f..74d1a46408c1 100644 --- a/arch/arm/plat-samsung/include/plat/adc.h +++ b/arch/arm/plat-samsung/include/plat/adc.h @@ -1,15 +1,11 @@ -/* arch/arm/plat-samsung/include/plat/adc.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C ADC driver information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_PLAT_ADC_H #define __ASM_PLAT_ADC_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 37cf20e04aff..2c7cf2665634 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -1,15 +1,11 @@ -/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C CPU frequency scaling support - core support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <plat/cpu-freq.h> diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h index 85517ab962ae..558892bcf9b6 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h @@ -1,15 +1,11 @@ -/* arch/arm/plat-samsung/include/plat/cpu-freq.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C CPU frequency scaling support - driver and board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <linux/cpufreq.h> diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index b7b702a72cac..fadcddbea064 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -1,5 +1,5 @@ -/* linux/arch/arm/plat-samsung/include/plat/cpu.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * @@ -7,11 +7,7 @@ * Ben Dooks <ben@simtec.co.uk> * * Header file for Samsung CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /* todo - fix when rmk changes iodescs to use `void __iomem *` */ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index e23fed311e5f..02b0c5750572 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -1,5 +1,5 @@ -/* arch/arm/plat-samsung/include/plat/devs.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * @@ -7,11 +7,7 @@ * Ben Dooks <ben@simtec.co.uk> * * Header file for s3c2410 standard platform devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __PLAT_DEVS_H #define __PLAT_DEVS_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h index 1f2972a74e9f..614240d768b4 100644 --- a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h @@ -1,12 +1,8 @@ -/* arch/arm/plat-samsung/include/plat/fb-s3c2410.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org> * * Inspired by pxafb.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_PLAT_FB_S3C2410_H diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index b89f8f208515..615d381ae32e 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -1,16 +1,12 @@ -/* arch/arm/plat-samsung/include/plat/fb.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C - FB platform data definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index a181d7ce81cf..db0c56f5ca15 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -1,16 +1,12 @@ -/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * Samsung Platform - GPIO pin configuration helper definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /* This is meant for core cpu support, machine or other driver files * should not be including this header. diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index e55d1f597db8..469c220e092b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -1,16 +1,12 @@ -/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C Platform - GPIO pin configuration - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /* This file contains the necessary definitions to get the basic gpio * pin configuration done such as setting a pin to input or output or diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 6ce11bfdc37e..51e721f5e491 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -1,15 +1,11 @@ -/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C Platform - GPIO core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __PLAT_SAMSUNG_GPIO_CORE_H #define __PLAT_SAMSUNG_GPIO_CORE_H diff --git a/arch/arm/plat-samsung/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h index f182669b8e8e..c5cfd5af3874 100644 --- a/arch/arm/plat-samsung/include/plat/iic-core.h +++ b/arch/arm/plat-samsung/include/plat/iic-core.h @@ -1,15 +1,11 @@ -/* arch/arm/mach-s3c2410/include/mach/iic-core.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C - I2C Controller core functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_ARCH_IIC_CORE_H #define __ASM_ARCH_IIC_CORE_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h index c81ace332a1e..9754b9a29945 100644 --- a/arch/arm/plat-samsung/include/plat/keypad.h +++ b/arch/arm/plat-samsung/include/plat/keypad.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Samsung Platform - Keypad platform data definitions * * Copyright (C) 2010 Samsung Electronics Co.Ltd * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #ifndef __PLAT_SAMSUNG_KEYPAD_H diff --git a/arch/arm/plat-samsung/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h index 3ffac4d2e4f0..34b39ded0e2e 100644 --- a/arch/arm/plat-samsung/include/plat/map-base.h +++ b/arch/arm/plat-samsung/include/plat/map-base.h @@ -1,15 +1,11 @@ -/* linux/include/asm-arm/plat-s3c/map.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2003, 2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * * S3C - Memory map definitions (virtual addresses) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_PLAT_MAP_H #define __ASM_PLAT_MAP_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h index 33104911862e..4244acbf4b65 100644 --- a/arch/arm/plat-samsung/include/plat/map-s3c.h +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -1,14 +1,10 @@ -/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C24XX - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_PLAT_MAP_S3C_H #define __ASM_PLAT_MAP_S3C_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index 0fe2828f9354..f5769e93544a 100644 --- a/arch/arm/plat-samsung/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -1,14 +1,10 @@ -/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5P - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_PLAT_MAP_S5P_H #define __ASM_PLAT_MAP_S5P_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/pm-common.h b/arch/arm/plat-samsung/include/plat/pm-common.h index 8705f9e0e288..1268bae04234 100644 --- a/arch/arm/plat-samsung/include/plat/pm-common.h +++ b/arch/arm/plat-samsung/include/plat/pm-common.h @@ -1,14 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2013 Samsung Electronics Co., Ltd. * Tomasz Figa <t.figa@samsung.com> * Copyright (c) 2004 Simtec Electronics * http://armlinux.simtec.co.uk/ * Written by Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __PLAT_SAMSUNG_PM_COMMON_H #define __PLAT_SAMSUNG_PM_COMMON_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 9dd562ab0841..2746137f9794 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -1,13 +1,9 @@ -/* arch/arm/plat-samsung/include/plat/pm.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2004 Simtec Electronics * http://armlinux.simtec.co.uk/ * Written by Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /* s3c_pm_init * diff --git a/arch/arm/plat-samsung/include/plat/pwm-core.h b/arch/arm/plat-samsung/include/plat/pwm-core.h index 5bff1facb672..05e3448642a1 100644 --- a/arch/arm/plat-samsung/include/plat/pwm-core.h +++ b/arch/arm/plat-samsung/include/plat/pwm-core.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2013 Tomasz Figa <tomasz.figa@gmail.com> * * Samsung PWM controller platform data helpers. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_PWM_CORE_H diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h index 70612100120f..58953c7381dd 100644 --- a/arch/arm/plat-samsung/include/plat/regs-adc.h +++ b/arch/arm/plat-samsung/include/plat/regs-adc.h @@ -1,13 +1,9 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-adc.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2004 Shannon Holland <holland@loser.net> * - * This program is free software; yosu can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * S3C2410 ADC registers -*/ + */ #ifndef __ASM_ARCH_REGS_ADC_H #define __ASM_ARCH_REGS_ADC_H "regs-adc.h" diff --git a/arch/arm/plat-samsung/include/plat/regs-irqtype.h b/arch/arm/plat-samsung/include/plat/regs-irqtype.h index c63cd3fc5ad3..ec5c4c5fdd8f 100644 --- a/arch/arm/plat-samsung/include/plat/regs-irqtype.h +++ b/arch/arm/plat-samsung/include/plat/regs-irqtype.h @@ -1,14 +1,10 @@ -/* arch/arm/plat-s3c/include/plat/regs-irqtype.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * * S3C - IRQ detection types. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including diff --git a/arch/arm/plat-samsung/include/plat/regs-spi.h b/arch/arm/plat-samsung/include/plat/regs-spi.h index 552fe7cfe281..607844311566 100644 --- a/arch/arm/plat-samsung/include/plat/regs-spi.h +++ b/arch/arm/plat-samsung/include/plat/regs-spi.h @@ -1,13 +1,9 @@ -/* arch/arm/plat-samsung/include/plat/regs-spi.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2004 Fetron GmbH * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * S3C2410 SPI register definition -*/ + */ #ifndef __ASM_ARCH_REGS_SPI_H #define __ASM_ARCH_REGS_SPI_H diff --git a/arch/arm/plat-samsung/include/plat/regs-udc.h b/arch/arm/plat-samsung/include/plat/regs-udc.h index 4003d3dab4e7..d8d2eeaca088 100644 --- a/arch/arm/plat-samsung/include/plat/regs-udc.h +++ b/arch/arm/plat-samsung/include/plat/regs-udc.h @@ -1,12 +1,7 @@ -/* arch/arm/plat-samsung/include/plat/regs-udc.h - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> - * - * This include file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. -*/ + */ #ifndef __ASM_ARCH_REGS_UDC_H #define __ASM_ARCH_REGS_UDC_H diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h index 209464adef97..d16eefe9ae78 100644 --- a/arch/arm/plat-samsung/include/plat/samsung-time.h +++ b/arch/arm/plat-samsung/include/plat/samsung-time.h @@ -1,14 +1,10 @@ -/* linux/arch/arm/plat-samsung/include/plat/samsung-time.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * Header file for samsung s3c and s5p time support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __ASM_PLAT_SAMSUNG_TIME_H #define __ASM_PLAT_SAMSUNG_TIME_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 2787553c3ae2..5731e42ea208 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -1,5 +1,5 @@ -/* linux/arch/arm/plat-samsung/include/plat/sdhci.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * @@ -9,11 +9,7 @@ * Ben Dooks <ben@simtec.co.uk> * * S3C Platform - SDHCI (HSMMC) platform data definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #ifndef __PLAT_S3C_SDHCI_H #define __PLAT_S3C_SDHCI_H __FILE__ diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index ab34dfadb7f9..6d0c788beb9d 100644 --- a/arch/arm/plat-samsung/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -1,11 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2011 Samsung Electronics Co.Ltd * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #ifndef __PLAT_SAMSUNG_USB_PHY_H diff --git a/arch/arm/plat-samsung/include/plat/wakeup-mask.h b/arch/arm/plat-samsung/include/plat/wakeup-mask.h index bbfa84b0505a..630909e6630b 100644 --- a/arch/arm/plat-samsung/include/plat/wakeup-mask.h +++ b/arch/arm/plat-samsung/include/plat/wakeup-mask.h @@ -1,14 +1,9 @@ -/* arch/arm/plat-samsung/include/plat/wakeup-mask.h - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Copyright 2010 Ben Dooks <ben-linux@fluff.org> * * Support for wakeup mask interrupts on newer SoCs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ + */ #ifndef __PLAT_WAKEUP_MASK_H #define __PLAT_WAKEUP_MASK_H __file__ diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 3776f7e752f0..e9acf02ef3c3 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -1,15 +1,10 @@ -/* linux/arch/arm/plat-s3c/init.c - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series CPU initialisation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// S3C series CPU initialisation /* * NOTE: Code in this file is not used on S3C64xx when booting with diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c index 6cf52ee7eeec..cbc3b4b45c74 100644 --- a/arch/arm/plat-samsung/platformdata.c +++ b/arch/arm/plat-samsung/platformdata.c @@ -1,13 +1,8 @@ -/* linux/arch/arm/plat-samsung/platformdata.c - * - * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org> - * - * Helper for platform data setting - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2010 Ben Dooks <ben-linux <at> fluff.org> +// +// Helper for platform data setting #include <linux/kernel.h> #include <linux/slab.h> diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index d63516374f7c..cd2c02c68bc3 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -1,16 +1,12 @@ -/* linux/arch/arm/plat-s3c/pm-check.c - * originally in linux/arch/arm/plat-s3c24xx/pm.c - * - * Copyright (c) 2004-2008 Simtec Electronics - * http://armlinux.simtec.co.uk - * Ben Dooks <ben@simtec.co.uk> - * - * S3C Power Mangament - suspend/resume memory corruption check. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// originally in linux/arch/arm/plat-s3c24xx/pm.c +// +// Copyright (c) 2004-2008 Simtec Electronics +// http://armlinux.simtec.co.uk +// Ben Dooks <ben@simtec.co.uk> +// +// S3C Power Mangament - suspend/resume memory corruption check. #include <linux/kernel.h> #include <linux/suspend.h> diff --git a/arch/arm/plat-samsung/pm-common.c b/arch/arm/plat-samsung/pm-common.c index 6534c3ff9fe2..59a10c6dcba1 100644 --- a/arch/arm/plat-samsung/pm-common.c +++ b/arch/arm/plat-samsung/pm-common.c @@ -1,17 +1,13 @@ -/* - * Copyright (C) 2013 Samsung Electronics Co., Ltd. - * Tomasz Figa <t.figa@samsung.com> - * Copyright (C) 2008 Openmoko, Inc. - * Copyright (C) 2004-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Samsung common power management helper functions. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2013 Samsung Electronics Co., Ltd. +// Tomasz Figa <t.figa@samsung.com> +// Copyright (C) 2008 Openmoko, Inc. +// Copyright (C) 2004-2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// Samsung common power management helper functions. #include <linux/io.h> #include <linux/kernel.h> diff --git a/arch/arm/plat-samsung/pm-debug.c b/arch/arm/plat-samsung/pm-debug.c index 64e15da33b42..b76b1e9ba4ae 100644 --- a/arch/arm/plat-samsung/pm-debug.c +++ b/arch/arm/plat-samsung/pm-debug.c @@ -1,17 +1,13 @@ -/* - * Copyright (C) 2013 Samsung Electronics Co., Ltd. - * Tomasz Figa <t.figa@samsung.com> - * Copyright (C) 2008 Openmoko, Inc. - * Copyright (C) 2004-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Samsung common power management (suspend to RAM) debug support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2013 Samsung Electronics Co., Ltd. +// Tomasz Figa <t.figa@samsung.com> +// Copyright (C) 2008 Openmoko, Inc. +// Copyright (C) 2004-2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// Samsung common power management (suspend to RAM) debug support #include <linux/serial_core.h> #include <linux/serial_s3c.h> diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index f9a09262f2fa..cb2e3bc79336 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -1,17 +1,11 @@ - -/* linux/arch/arm/plat-s3c/pm-gpio.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series GPIO PM code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// S3C series GPIO PM code #include <linux/kernel.h> #include <linux/device.h> diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index d7803b434732..d6bfd66592b0 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -1,16 +1,11 @@ -/* linux/arch/arm/plat-s3c/pm.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2004-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C common power management (suspend to ram) support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2008 Openmoko, Inc. +// Copyright 2004-2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// S3C common power management (suspend to ram) support. #include <linux/init.h> #include <linux/suspend.h> diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c index b9de6b543330..24f96fb80738 100644 --- a/arch/arm/plat-samsung/wakeup-mask.c +++ b/arch/arm/plat-samsung/wakeup-mask.c @@ -1,13 +1,8 @@ -/* arch/arm/plat-samsung/wakeup-mask.c - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * Support for wakeup mask interrupts on newer SoCs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2010 Ben Dooks <ben-linux@fluff.org> +// +// Support for wakeup mask interrupts on newer SoCs #include <linux/kernel.h> #include <linux/spinlock.h> diff --git a/arch/arm/plat-samsung/watchdog-reset.c b/arch/arm/plat-samsung/watchdog-reset.c index 307d8ad96a78..ce42cc640a61 100644 --- a/arch/arm/plat-samsung/watchdog-reset.c +++ b/arch/arm/plat-samsung/watchdog-reset.c @@ -1,16 +1,11 @@ -/* arch/arm/plat-samsung/watchdog-reset.c - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> - * - * Watchdog reset support for Samsung SoCs. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> +// +// Watchdog reset support for Samsung SoCs. #include <linux/clk.h> #include <linux/err.h> diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c index 52d1cd14fda4..e90cc8a08186 100644 --- a/arch/arm/probes/kprobes/core.c +++ b/arch/arm/probes/kprobes/core.c @@ -32,6 +32,7 @@ #include <linux/percpu.h> #include <linux/bug.h> #include <asm/patch.h> +#include <asm/sections.h> #include "../decode-arm.h" #include "../decode-thumb.h" @@ -64,9 +65,6 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) int is; const struct decode_checker **checkers; - if (in_exception_text(addr)) - return -EINVAL; - #ifdef CONFIG_THUMB2_KERNEL thumb = true; addr &= ~1; /* Bit 0 would normally be set to indicate Thumb code */ @@ -680,3 +678,13 @@ int __init arch_init_kprobes() #endif return 0; } + +bool arch_within_kprobe_blacklist(unsigned long addr) +{ + void *a = (void *)addr; + + return __in_irqentry_text(addr) || + in_entry_text(addr) || + in_idmap_text(addr) || + memory_contains(__kprobes_text_start, __kprobes_text_end, a, 1); +} diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index a9313b66f770..4eac94c1eb6f 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -345,6 +345,7 @@ mxlads MACH_MXLADS MXLADS 1851 linkstation_mini MACH_LINKSTATION_MINI LINKSTATION_MINI 1858 afeb9260 MACH_AFEB9260 AFEB9260 1859 imx27ipcam MACH_IMX27IPCAM IMX27IPCAM 1871 +bk3 MACH_BK3 BK3 1880 rd88f6183ap_ge MACH_RD88F6183AP_GE RD88F6183AP_GE 1894 realview_pba8 MACH_REALVIEW_PBA8 REALVIEW_PBA8 1897 realview_pbx MACH_REALVIEW_PBX REALVIEW_PBX 1901 diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index a71a48e71fff..03c6a3c72f9c 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -257,7 +257,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ if (exceptions == VFP_EXCEPTION_ERROR) { vfp_panic("unhandled bounce", inst); - vfp_raise_sigfpe(0, regs); + vfp_raise_sigfpe(FPE_FIXME, regs); return; } |