diff options
Diffstat (limited to 'arch/arm')
197 files changed, 1043 insertions, 744 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ba412e02ec0c..43594d5116ef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -20,7 +20,6 @@ config ARM select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HARDIRQS_SW_RESEND - select HAVE_AOUT select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER @@ -218,7 +217,8 @@ config VECTORS_BASE default DRAM_BASE if REMAP_VECTORS_TO_RAM default 0x00000000 help - The base address of exception vectors. + The base address of exception vectors. This must be two pages + in size. config ARM_PATCH_PHYS_VIRT bool "Patch physical to virtual translations at runtime" if EMBEDDED @@ -1600,8 +1600,7 @@ config LOCAL_TIMERS config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 512 if SOC_OMAP5 - default 512 if ARCH_KEYSTONE + default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 default 392 if ARCH_U8500 default 352 if ARCH_VT8500 default 288 if ARCH_SUNXI diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e401a766c0bd..583f4a00ec32 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -804,9 +804,19 @@ config DEBUG_LL_INCLUDE config DEBUG_UNCOMPRESS bool - default y if ARCH_MULTIPLATFORM && DEBUG_LL && \ - !DEBUG_OMAP2PLUS_UART && \ + depends on ARCH_MULTIPLATFORM + default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ !DEBUG_TEGRA_UART + help + This option influences the normal decompressor output for + multiplatform kernels. Normally, multiplatform kernels disable + decompressor output because it is not possible to know where to + send the decompressor output. + + When this option is set, the selected DEBUG_LL output method + will be re-used for normal decompressor output on multiplatform + kernels. + config UNCOMPRESS_INCLUDE string diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c0ac0f5e5e5c..6fd2ceae305a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -153,6 +153,7 @@ machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EP93XX) += ep93xx +machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_GEMINI) += gemini machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_INTEGRATOR) += integrator @@ -160,15 +161,16 @@ machine-$(CONFIG_ARCH_IOP13XX) += iop13xx machine-$(CONFIG_ARCH_IOP32X) += iop32x machine-$(CONFIG_ARCH_IOP33X) += iop33x machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx +machine-$(CONFIG_ARCH_KEYSTONE) += keystone machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood machine-$(CONFIG_ARCH_KS8695) += ks8695 machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MMP) += mmp machine-$(CONFIG_ARCH_MSM) += msm machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 +machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx machine-$(CONFIG_ARCH_MXS) += mxs -machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_ARCH_NSPIRE) += nspire @@ -176,7 +178,6 @@ machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell -machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip @@ -186,25 +187,24 @@ machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0 machine-$(CONFIG_ARCH_S5PC100) += s5pc100 machine-$(CONFIG_ARCH_S5PV210) += s5pv210 -machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_SHARK) += shark machine-$(CONFIG_ARCH_SHMOBILE) += shmobile +machine-$(CONFIG_ARCH_SIRF) += prima2 +machine-$(CONFIG_ARCH_SOCFPGA) += socfpga +machine-$(CONFIG_ARCH_STI) += sti +machine-$(CONFIG_ARCH_SUNXI) += sunxi machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress +machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 +machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_FOOTBRIDGE) += footbridge -machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_PLAT_SPEAR) += spear -machine-$(CONFIG_ARCH_STI) += sti -machine-$(CONFIG_ARCH_VIRT) += virt -machine-$(CONFIG_ARCH_ZYNQ) += zynq -machine-$(CONFIG_ARCH_SUNXI) += sunxi -machine-$(CONFIG_ARCH_KEYSTONE) += keystone # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d59b70c6a6a0..3d77dbe406f4 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -14,11 +14,11 @@ compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9"; chosen { - bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; }; memory { - reg = <0x20000000 0x10000000>; + reg = <0x20000000 0x8000000>; }; clocks { diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index b753855b2058..49e3c45818c2 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -94,8 +94,9 @@ usb0: ohci@00600000 { status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ + &pioD 19 GPIO_ACTIVE_LOW &pioD 20 GPIO_ACTIVE_LOW >; }; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 0e8cd6d38e9b..8678e0c11119 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -491,6 +491,12 @@ sirf,function = "usp0"; }; }; + usp0_uart_nostreamctrl_pins_a: usp0@1 { + usp0 { + sirf,pins = "usp0_uart_nostreamctrl_grp"; + sirf,function = "usp0_uart_nostreamctrl"; + }; + }; usp1_pins_a: usp1@0 { usp1 { sirf,pins = "usp1grp"; @@ -521,16 +527,16 @@ sirf,function = "pulse_count"; }; }; - cko0_rst_pins_a: cko0_rst@0 { - cko0_rst { - sirf,pins = "cko0_rstgrp"; - sirf,function = "cko0_rst"; + cko0_pins_a: cko0@0 { + cko0 { + sirf,pins = "cko0grp"; + sirf,function = "cko0"; }; }; - cko1_rst_pins_a: cko1_rst@0 { - cko1_rst { - sirf,pins = "cko1_rstgrp"; - sirf,function = "cko1_rst"; + cko1_pins_a: cko1@0 { + cko1 { + sirf,pins = "cko1grp"; + sirf,function = "cko1"; }; }; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 43bf3c796cba..0e7fed47bd8d 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -147,7 +147,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - + clocks = <&saif0>; }; pcf8563: rtc@51 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 1f0d38d7b16f..e035f4664b97 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -195,7 +195,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - + clocks = <&saif0>; }; at24@51 { diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 880df2f13be8..44d9da57736e 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -184,7 +184,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - + clocks = <&saif0>; }; eeprom: eeprom@51 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 6a8acb01b1d3..9524a0571281 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -837,6 +837,7 @@ compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59 80>; + #clock-cells = <0>; clocks = <&clks 53>; dmas = <&dma_apbx 4>; dma-names = "rx-tx"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6dd9486c755b..ad3471ca17c7 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -61,6 +61,16 @@ mux-int-port = <2>; mux-ext-port = <3>; }; + + clocks { + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 1>; + }; + }; }; &esdhc1 { @@ -229,6 +239,7 @@ MX51_PAD_EIM_A27__GPIO2_21 0x5 MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 >; }; }; @@ -255,7 +266,7 @@ sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clock-frequency = <26000000>; + clocks = <&clk_26M>; VDDA-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; }; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index aaa33bc99f78..a63090267941 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -27,7 +27,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm2 0 50000 0 0>; + pwms = <&pwm2 0 50000>; brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>; default-brightness-level = <10>; enable-gpios = <&gpio7 7 0>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 3895fbba8fce..569aa9f2c4ed 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -725,15 +725,15 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5 - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 >; }; pinctrl_uart1_2: uart1grp-2 { fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5 + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 >; }; @@ -748,8 +748,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 >; }; @@ -766,17 +766,17 @@ uart3 { pinctrl_uart3_1: uart3grp-1 { fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 - MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5 - MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 >; }; pinctrl_uart3_2: uart3grp-2 { fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 >; }; @@ -785,8 +785,8 @@ uart4 { pinctrl_uart4_1: uart4grp-1 { fsl,pins = < - MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5 - MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5 + MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 >; }; }; @@ -794,8 +794,8 @@ uart5 { pinctrl_uart5_1: uart5grp-1 { fsl,pins = < - MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5 - MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5 + MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 >; }; }; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index db2060c46540..9c1167b0459b 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -26,7 +26,7 @@ cpu-offset = <0x80000>; }; - msmgpio: gpio@fd510000 { + msmgpio: gpio@800000 { compatible = "qcom,msm-gpio"; gpio-controller; #gpio-cells = <2>; @@ -34,7 +34,7 @@ interrupts = <0 32 0x4>; interrupt-controller; #interrupt-cells = <2>; - reg = <0xfd510000 0x4000>; + reg = <0x800000 0x4000>; }; serial@16440000 { diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b72678abff..65d7b601651c 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -235,7 +235,7 @@ }; &mmc1 { - vmmc-supply = <&vmmcsd_fixed>; + vmmc-supply = <&ldo9_reg>; bus-width = <4>; }; @@ -282,6 +282,7 @@ regulators { smps123_reg: smps123 { + /* VDD_OPP_MPU */ regulator-name = "smps123"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; @@ -290,6 +291,7 @@ }; smps45_reg: smps45 { + /* VDD_OPP_MM */ regulator-name = "smps45"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -298,6 +300,7 @@ }; smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -306,6 +309,7 @@ }; smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ regulator-name = "smps7"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -314,6 +318,7 @@ }; smps8_reg: smps8 { + /* VDD_OPP_CORE */ regulator-name = "smps8"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -322,15 +327,15 @@ }; smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ regulator-name = "smps9"; regulator-min-microvolt = <2100000>; regulator-max-microvolt = <2100000>; - regulator-always-on; - regulator-boot-on; ti,smps-range = <0x80>; }; smps10_reg: smps10 { + /* VBUS_5V_OTG */ regulator-name = "smps10"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -339,38 +344,40 @@ }; ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ regulator-name = "ldo2"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; }; ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ regulator-name = "ldo3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; }; ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -379,38 +386,43 @@ }; ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ regulator-name = "ldo6"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; }; ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ regulator-name = "ldo7"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; }; ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ regulator-name = "ldo8"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-boot-on; + /* Unused */ + status = "disabled"; }; ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ regulator-name = "ldo9"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-max-microvolt = <3000000>; regulator-boot-on; }; ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -419,12 +431,20 @@ }; ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ regulator-name = "ldousb"; regulator-min-microvolt = <3250000>; regulator-max-microvolt = <3250000>; regulator-always-on; regulator-boot-on; }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; }; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 05e9489cf95c..bbeb623fc2c6 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -515,16 +515,16 @@ sirf,function = "pulse_count"; }; }; - cko0_rst_pins_a: cko0_rst@0 { - cko0_rst { - sirf,pins = "cko0_rstgrp"; - sirf,function = "cko0_rst"; + cko0_pins_a: cko0@0 { + cko0 { + sirf,pins = "cko0grp"; + sirf,function = "cko0"; }; }; - cko1_rst_pins_a: cko1_rst@0 { - cko1_rst { - sirf,pins = "cko1_rstgrp"; - sirf,function = "cko1_rst"; + cko1_pins_a: cko1@0 { + cko1 { + sirf,pins = "cko1grp"; + sirf,function = "cko1"; }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 957b21a71b4b..0f246c979262 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -166,6 +166,15 @@ reg = <0x9000 0x100>; st,bank-name = "PIO31"; }; + + serial2-oe { + pinctrl_serial2_oe: serial2-1 { + st,pins { + output-enable = <&PIO11 3 ALT2 OUT>; + }; + }; + }; + }; pin-controller-rear { @@ -218,7 +227,6 @@ st,pins { tx = <&PIO17 4 ALT2 OUT>; rx = <&PIO17 5 ALT2 IN>; - output-enable = <&PIO11 3 ALT2 OUT>; }; }; }; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 3cecd9689a49..1a0326ea7d07 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -79,7 +79,7 @@ interrupts = <0 197 0>; clocks = <&CLK_S_ICN_REG_0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2>; + pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>; }; /* SBC_UART1 */ diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index 7321403cab8a..f5b9898d9c6e 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -6,10 +6,12 @@ #address-cells = <1>; #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 2fcb3f2ca160..5592be6f2f7a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -457,6 +457,7 @@ }; usb-phy@c5004000 { + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 365760b33a26..40e6fb280333 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -830,6 +830,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio 24 0>; /* PD0 */ + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index ed4b901b0227..37c93d3c4812 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -412,6 +412,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio 170 0>; /* PV2 */ + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index ab67c94db280..a3d0ebad78a1 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -588,6 +588,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + regulator-always-on; + regulator-boot-on; }; vbus3_reg: regulator@3 { @@ -598,6 +600,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index b3034da00a37..ae6a17aed9ee 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -47,6 +47,12 @@ regulator-max-microvolt = <3150000>; }; + vmmc2: regulator-vmmc2 { + compatible = "ti,twl4030-vmmc2"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; + }; + vusb1v5: regulator-vusb1v5 { compatible = "ti,twl4030-vusb1v5"; }; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index e1eb7dadda80..67d929cf9804 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -442,8 +442,8 @@ compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; interrupts = <0 78 0x04>; - clocks = <&clks VF610_CLK_ENET>, - <&clks VF610_CLK_ENET>, + clocks = <&clks VF610_CLK_ENET0>, + <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; @@ -453,8 +453,8 @@ compatible = "fsl,mvf600-fec"; reg = <0x400d1000 0x1000>; interrupts = <0 79 0x04>; - clocks = <&clks VF610_CLK_ENET>, - <&clks VF610_CLK_ENET>, + clocks = <&clks VF610_CLK_ENET1>, + <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index a432e6c1dac1..39ad030ac0c7 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -26,7 +26,6 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/edma.h> -#include <linux/err.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_dma.h> diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 510e5b13aa2e..1bc34c7567fd 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -19,7 +19,7 @@ #include <asm/smp.h> #include <asm/smp_plat.h> -static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned int mpidr, pcpu, pcluster, ret; extern void secondary_startup(void); @@ -40,7 +40,7 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i return 0; } -static void __cpuinit mcpm_secondary_init(unsigned int cpu) +static void mcpm_secondary_init(unsigned int cpu) { mcpm_cpu_powered_up(); } diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 7c868139bdb0..1571bea48bed 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -102,6 +102,8 @@ CONFIG_SND_SOC=m CONFIG_SND_DAVINCI_SOC=m # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +CONFIG_DMADEVICES=y +CONFIG_TI_EDMA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index c86fd75e181a..ab2f7378352c 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -162,6 +162,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_TI_EDMA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index fe0bdc361d2c..6e572c64cf5a 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -53,6 +53,7 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_OMAP_OCP2SCP=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y @@ -61,6 +62,7 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_KS8851=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_MDIO_SUN4I=y @@ -89,6 +91,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y +CONFIG_SPI_OMAP24XX=y CONFIG_SPI_PL022=y CONFIG_SPI_SIRF=y CONFIG_SPI_TEGRA114=y @@ -111,11 +114,12 @@ CONFIG_FB_SIMPLE=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MXC=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_ISP1760_HCD=y CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y CONFIG_AB8500_USB=y CONFIG_NOP_USB_XCEIV=y CONFIG_OMAP_USB2=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 35f8cf299fa2..263ae3869e32 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -1,6 +1,8 @@ # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -48,7 +50,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_TESTS=m CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND_ECC_SMC=y CONFIG_MTD_NAND=y @@ -94,8 +95,10 @@ CONFIG_I2C_GPIO=y CONFIG_I2C_NOMADIK=y CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set +CONFIG_REGULATOR=y CONFIG_MMC=y -CONFIG_MMC_CLKGATE=y +CONFIG_MMC_UNSAFE_RESUME=y +# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y diff --git a/arch/arm/include/asm/a.out-core.h b/arch/arm/include/asm/a.out-core.h deleted file mode 100644 index 92f10cb5c70c..000000000000 --- a/arch/arm/include/asm/a.out-core.h +++ /dev/null @@ -1,45 +0,0 @@ -/* a.out coredump register dumper - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_A_OUT_CORE_H -#define _ASM_A_OUT_CORE_H - -#ifdef __KERNEL__ - -#include <linux/user.h> -#include <linux/elfcore.h> - -/* - * fill in the user structure for an a.out core dump - */ -static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) -{ - struct task_struct *tsk = current; - - dump->magic = CMAGIC; - dump->start_code = tsk->mm->start_code; - dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1); - - dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT; - dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT; - dump->u_ssize = 0; - - memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg)); - - if (dump->start_stack < 0x04000000) - dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT; - - dump->regs = *regs; - dump->u_fpvalid = dump_fpu (regs, &dump->u_fp); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_A_OUT_CORE_H */ diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index accefe099182..e406d575c94f 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -89,7 +89,7 @@ static inline u64 arch_counter_get_cntvct(void) return cval; } -static inline void __cpuinit arch_counter_set_user_access(void) +static inline void arch_counter_set_user_access(void) { u32 cntkctl; diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 8c25dc4e9851..9672e978d50d 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -89,13 +89,18 @@ extern unsigned int processor_id; __val; \ }) +/* + * The memory clobber prevents gcc 4.5 from reordering the mrc before + * any is_smp() tests, which can cause undefined instruction aborts on + * ARM1136 r0 due to the missing extended CP15 registers. + */ #define read_cpuid_ext(ext_reg) \ ({ \ unsigned int __val; \ asm("mrc p15, 0, %0, c0, " ext_reg \ : "=r" (__val) \ : \ - : "cc"); \ + : "memory"); \ __val; \ }) diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 38050b1c4800..56211f2084ef 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -130,4 +130,10 @@ struct mm_struct; extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk +#ifdef CONFIG_MMU +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 +struct linux_binprm; +int arch_setup_additional_pages(struct linux_binprm *, int); +#endif + #endif diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index e3d55547e755..6f18da09668b 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -6,8 +6,11 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID atomic64_t id; +#else + int switch_pending; #endif unsigned int vmalloc_seq; + unsigned long sigpage; } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index b5792b7fd8d3..9b32f76bb0dd 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -56,7 +56,7 @@ static inline void check_and_switch_context(struct mm_struct *mm, * on non-ASID CPUs, the old mm will remain valid until the * finish_arch_post_lock_switch() call. */ - set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM); + mm->context.switch_pending = 1; else cpu_switch_mm(mm->pgd, mm); } @@ -65,9 +65,21 @@ static inline void check_and_switch_context(struct mm_struct *mm, finish_arch_post_lock_switch static inline void finish_arch_post_lock_switch(void) { - if (test_and_clear_thread_flag(TIF_SWITCH_MM)) { - struct mm_struct *mm = current->mm; - cpu_switch_mm(mm->pgd, mm); + struct mm_struct *mm = current->mm; + + if (mm && mm->context.switch_pending) { + /* + * Preemption must be disabled during cpu_switch_mm() as we + * have some stateful cache flush implementations. Check + * switch_pending again in case we were preempted and the + * switch to this mm was already done. + */ + preempt_disable(); + if (mm->context.switch_pending) { + mm->context.switch_pending = 0; + cpu_switch_mm(mm->pgd, mm); + } + preempt_enable_no_resched(); } } diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index 6363f3d1d505..4355f0ec44d6 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -142,7 +142,9 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from, #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); +#ifdef CONFIG_KUSER_HELPERS #define __HAVE_ARCH_GATE_AREA 1 +#endif #ifdef CONFIG_ARM_LPAE #include <asm/pgtable-3level-types.h> diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 06e7d509eaac..413f3876341c 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -54,7 +54,6 @@ struct thread_struct { #define start_thread(regs,pc,sp) \ ({ \ - unsigned long *stack = (unsigned long *)sp; \ memset(regs->uregs, 0, sizeof(regs->uregs)); \ if (current->personality & ADDR_LIMIT_32BIT) \ regs->ARM_cpsr = USR_MODE; \ @@ -65,9 +64,6 @@ struct thread_struct { regs->ARM_cpsr |= PSR_ENDSTATE; \ regs->ARM_pc = pc & ~1; /* pc */ \ regs->ARM_sp = sp; /* sp */ \ - regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ - regs->ARM_r1 = stack[1]; /* r1 (argv) */ \ - regs->ARM_r0 = stack[0]; /* r0 (argc) */ \ nommu_start_thread(regs); \ }) diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index 6462a721ebd4..a252c0bfacf5 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -88,4 +88,7 @@ static inline u32 mpidr_hash_size(void) { return 1 << mpidr_hash.bits; } + +extern int platform_can_cpu_hotplug(void); + #endif diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index f8b8965666e9..b07c09e5a0ac 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -107,7 +107,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) " subs %1, %0, %0, ror #16\n" " addeq %0, %0, %4\n" " strexeq %2, %0, [%3]" - : "=&r" (slock), "=&r" (contended), "=r" (res) + : "=&r" (slock), "=&r" (contended), "=&r" (res) : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) : "cc"); } while (res); @@ -168,17 +168,20 @@ static inline void arch_write_lock(arch_rwlock_t *rw) static inline int arch_write_trylock(arch_rwlock_t *rw) { - unsigned long tmp; + unsigned long contended, res; - __asm__ __volatile__( -" ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&rw->lock), "r" (0x80000000) - : "cc"); + do { + __asm__ __volatile__( + " ldrex %0, [%2]\n" + " mov %1, #0\n" + " teq %0, #0\n" + " strexeq %1, %3, [%2]" + : "=&r" (contended), "=&r" (res) + : "r" (&rw->lock), "r" (0x80000000) + : "cc"); + } while (res); - if (tmp == 0) { + if (!contended) { smp_mb(); return 1; } else { @@ -254,18 +257,26 @@ static inline void arch_read_unlock(arch_rwlock_t *rw) static inline int arch_read_trylock(arch_rwlock_t *rw) { - unsigned long tmp, tmp2 = 1; + unsigned long contended, res; - __asm__ __volatile__( -" ldrex %0, [%2]\n" -" adds %0, %0, #1\n" -" strexpl %1, %0, [%2]\n" - : "=&r" (tmp), "+r" (tmp2) - : "r" (&rw->lock) - : "cc"); + do { + __asm__ __volatile__( + " ldrex %0, [%2]\n" + " mov %1, #0\n" + " adds %0, %0, #1\n" + " strexpl %1, %0, [%2]" + : "=&r" (contended), "=&r" (res) + : "r" (&rw->lock) + : "cc"); + } while (res); - smp_mb(); - return tmp2 == 0; + /* If the lock is negative, then it is already held for write. */ + if (contended < 0x80000000) { + smp_mb(); + return 1; + } else { + return 0; + } } /* read_can_lock - would read_trylock() succeed? */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 214d4158089a..2b8114fcba09 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -156,7 +156,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 -#define TIF_SWITCH_MM 22 /* deferred switch_mm */ #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 46e7cfb3e721..0baf7f0d9394 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -43,6 +43,7 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; struct vm_area_struct *vma; + unsigned long start, end; unsigned long range_start; unsigned long range_end; unsigned int nr; @@ -107,10 +108,12 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm) +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { tlb->mm = mm; - tlb->fullmm = fullmm; + tlb->fullmm = !(start | (end+1)); + tlb->start = start; + tlb->end = end; tlb->vma = NULL; tlb->max = ARRAY_SIZE(tlb->local); tlb->pages = tlb->local; diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index fdbb9e369745..f467e9b3f8d5 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -443,7 +443,18 @@ static inline void local_flush_bp_all(void) isb(); } +#include <asm/cputype.h> #ifdef CONFIG_ARM_ERRATA_798181 +static inline int erratum_a15_798181(void) +{ + unsigned int midr = read_cpuid_id(); + + /* Cortex-A15 r0p0..r3p2 affected */ + if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2) + return 0; + return 1; +} + static inline void dummy_flush_tlb_a15_erratum(void) { /* @@ -453,6 +464,11 @@ static inline void dummy_flush_tlb_a15_erratum(void) dsb(); } #else +static inline int erratum_a15_798181(void) +{ + return 0; +} + static inline void dummy_flush_tlb_a15_erratum(void) { } diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index 50af92bac737..4371f45c5784 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -29,6 +29,7 @@ #define BOOT_CPU_MODE_MISMATCH PSR_N_BIT #ifndef __ASSEMBLY__ +#include <asm/cacheflush.h> #ifdef CONFIG_ARM_VIRT_EXT /* @@ -41,10 +42,21 @@ */ extern int __boot_cpu_mode; +static inline void sync_boot_mode(void) +{ + /* + * As secondaries write to __boot_cpu_mode with caches disabled, we + * must flush the corresponding cache entries to ensure the visibility + * of their writes. + */ + sync_cache_r(&__boot_cpu_mode); +} + void __hyp_set_vectors(unsigned long phys_vector_base); unsigned long __hyp_get_vectors(void); #else #define __boot_cpu_mode (SVC_MODE) +#define sync_boot_mode() #endif #ifndef ZIMAGE diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index 47bcb2d254af..18d76fd5a2af 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -1,7 +1,6 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm -header-y += a.out.h header-y += byteorder.h header-y += fcntl.h header-y += hwcap.h diff --git a/arch/arm/include/uapi/asm/a.out.h b/arch/arm/include/uapi/asm/a.out.h deleted file mode 100644 index 083894b2e3bc..000000000000 --- a/arch/arm/include/uapi/asm/a.out.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ARM_A_OUT_H__ -#define __ARM_A_OUT_H__ - -#include <linux/personality.h> -#include <linux/types.h> - -struct exec -{ - __u32 a_info; /* Use macros N_MAGIC, etc for access */ - __u32 a_text; /* length of text, in bytes */ - __u32 a_data; /* length of data, in bytes */ - __u32 a_bss; /* length of uninitialized data area for file, in bytes */ - __u32 a_syms; /* length of symbol table data in file, in bytes */ - __u32 a_entry; /* start address */ - __u32 a_trsize; /* length of relocation info for text, in bytes */ - __u32 a_drsize; /* length of relocation info for data, in bytes */ -}; - -/* - * This is always the same - */ -#define N_TXTADDR(a) (0x00008000) - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#define M_ARM 103 - -#ifndef LIBRARY_START_TEXT -#define LIBRARY_START_TEXT (0x00c00000) -#endif - -#endif /* __A_OUT_GNU_H__ */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a39cfc2a1f90..9cbe70c8b0ef 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -357,7 +357,8 @@ ENDPROC(__pabt_svc) .endm .macro kuser_cmpxchg_check -#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) +#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \ + !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) #ifndef CONFIG_MMU #warning "NPTL on non MMU needs fixing" #else @@ -742,6 +743,18 @@ ENDPROC(__switch_to) #endif .endm + .macro kuser_pad, sym, size + .if (. - \sym) & 3 + .rept 4 - (. - \sym) & 3 + .byte 0 + .endr + .endif + .rept (\size - (. - \sym)) / 4 + .word 0xe7fddef1 + .endr + .endm + +#ifdef CONFIG_KUSER_HELPERS .align 5 .globl __kuser_helper_start __kuser_helper_start: @@ -832,18 +845,13 @@ kuser_cmpxchg64_fixup: #error "incoherent kernel configuration" #endif - /* pad to next slot */ - .rept (16 - (. - __kuser_cmpxchg64)/4) - .word 0 - .endr - - .align 5 + kuser_pad __kuser_cmpxchg64, 64 __kuser_memory_barrier: @ 0xffff0fa0 smp_dmb arm usr_ret lr - .align 5 + kuser_pad __kuser_memory_barrier, 32 __kuser_cmpxchg: @ 0xffff0fc0 @@ -916,13 +924,14 @@ kuser_cmpxchg32_fixup: #endif - .align 5 + kuser_pad __kuser_cmpxchg, 32 __kuser_get_tls: @ 0xffff0fe0 ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init usr_ret lr mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code - .rep 4 + kuser_pad __kuser_get_tls, 16 + .rep 3 .word 0 @ 0xffff0ff0 software TLS value, then .endr @ pad up to __kuser_helper_version @@ -932,14 +941,16 @@ __kuser_helper_version: @ 0xffff0ffc .globl __kuser_helper_end __kuser_helper_end: +#endif + THUMB( .thumb ) /* * Vector stubs. * - * This code is copied to 0xffff0200 so we can use branches in the - * vectors, rather than ldr's. Note that this code must not - * exceed 0x300 bytes. + * This code is copied to 0xffff1000 so we can use branches in the + * vectors, rather than ldr's. Note that this code must not exceed + * a page size. * * Common stub entry macro: * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC @@ -986,8 +997,17 @@ ENDPROC(vector_\name) 1: .endm - .globl __stubs_start + .section .stubs, "ax", %progbits __stubs_start: + @ This must be the first word + .word vector_swi + +vector_rst: + ARM( swi SYS_ERROR0 ) + THUMB( svc #0 ) + THUMB( nop ) + b vector_und + /* * Interrupt dispatcher */ @@ -1082,6 +1102,16 @@ __stubs_start: .align 5 /*============================================================================= + * Address exception handler + *----------------------------------------------------------------------------- + * These aren't too critical. + * (they're not supposed to happen, and won't happen in 32-bit data mode). + */ + +vector_addrexcptn: + b vector_addrexcptn + +/*============================================================================= * Undefined FIQs *----------------------------------------------------------------------------- * Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC @@ -1094,45 +1124,19 @@ __stubs_start: vector_fiq: subs pc, lr, #4 -/*============================================================================= - * Address exception handler - *----------------------------------------------------------------------------- - * These aren't too critical. - * (they're not supposed to happen, and won't happen in 32-bit data mode). - */ - -vector_addrexcptn: - b vector_addrexcptn - -/* - * We group all the following data together to optimise - * for CPUs with separate I & D caches. - */ - .align 5 - -.LCvswi: - .word vector_swi - - .globl __stubs_end -__stubs_end: - - .equ stubs_offset, __vectors_start + 0x200 - __stubs_start + .globl vector_fiq_offset + .equ vector_fiq_offset, vector_fiq - .globl __vectors_start + .section .vectors, "ax", %progbits __vectors_start: - ARM( swi SYS_ERROR0 ) - THUMB( svc #0 ) - THUMB( nop ) - W(b) vector_und + stubs_offset - W(ldr) pc, .LCvswi + stubs_offset - W(b) vector_pabt + stubs_offset - W(b) vector_dabt + stubs_offset - W(b) vector_addrexcptn + stubs_offset - W(b) vector_irq + stubs_offset - W(b) vector_fiq + stubs_offset - - .globl __vectors_end -__vectors_end: + W(b) vector_rst + W(b) vector_und + W(ldr) pc, __vectors_start + 0x1000 + W(b) vector_pabt + W(b) vector_dabt + W(b) vector_addrexcptn + W(b) vector_irq + W(b) vector_fiq .data diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S index e00621f1403f..52b26432c9a9 100644 --- a/arch/arm/kernel/entry-v7m.S +++ b/arch/arm/kernel/entry-v7m.S @@ -49,7 +49,7 @@ __irq_entry: mov r1, sp stmdb sp!, {lr} @ routine called with r0 = irq number, r1 = struct pt_regs * - bl nvic_do_IRQ + bl nvic_handle_irq pop {lr} @ diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 2adda11f712f..918875d96d5d 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -47,6 +47,11 @@ #include <asm/irq.h> #include <asm/traps.h> +#define FIQ_OFFSET ({ \ + extern void *vector_fiq_offset; \ + (unsigned)&vector_fiq_offset; \ + }) + static unsigned long no_fiq_insn; /* Default reacquire function @@ -79,14 +84,14 @@ int show_fiq_list(struct seq_file *p, int prec) void set_fiq_handler(void *start, unsigned int length) { -#if defined(CONFIG_CPU_USE_DOMAINS) - memcpy((void *)0xffff001c, start, length); -#else - memcpy(vectors_page + 0x1c, start, length); -#endif - flush_icache_range(0xffff001c, 0xffff001c + length); - if (!vectors_high()) - flush_icache_range(0x1c, 0x1c + length); + void *base = vectors_page; + unsigned offset = FIQ_OFFSET; + + memcpy(base + offset, start, length); + if (!cache_is_vipt_nonaliasing()) + flush_icache_range((unsigned long)base + offset, offset + + length); + flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length); } int claim_fiq(struct fiq_handler *f) @@ -144,6 +149,7 @@ EXPORT_SYMBOL(disable_fiq); void __init init_FIQ(int start) { - no_fiq_insn = *(unsigned long *)0xffff001c; + unsigned offset = FIQ_OFFSET; + no_fiq_insn = *(unsigned long *)(0xffff0000 + offset); fiq_start = start; } diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 76ab5ca50610..47cd974e57ea 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -149,7 +149,6 @@ ENDPROC(lookup_processor_type) * r5 = proc_info pointer in physical address space * r9 = cpuid (preserved) */ - __CPUINIT __lookup_processor_type: adr r3, __lookup_processor_type_data ldmia r3, {r4 - r6} diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 75f14cc3e073..14235ba64a90 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -87,7 +87,7 @@ ENTRY(stext) ENDPROC(stext) #ifdef CONFIG_SMP - __CPUINIT + .text ENTRY(secondary_startup) /* * Common entry point for secondary CPUs. diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 45e8935cae4e..2c7cc1e03473 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -343,7 +343,7 @@ __turn_mmu_on_loc: .long __turn_mmu_on_end #if defined(CONFIG_SMP) - __CPUINIT + .text ENTRY(secondary_startup) /* * Common entry point for secondary CPUs. diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 1fd749ee4a1b..7b95de601357 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -1020,7 +1020,7 @@ out_mdbgen: cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); } -static int __cpuinit dbg_reset_notify(struct notifier_block *self, +static int dbg_reset_notify(struct notifier_block *self, unsigned long action, void *cpu) { if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE) @@ -1029,7 +1029,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata dbg_reset_nb = { +static struct notifier_block dbg_reset_nb = { .notifier_call = dbg_reset_notify, }; diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 4910232c4833..797b1a6a4906 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -56,8 +56,8 @@ ENTRY(__boot_cpu_mode) ldr \reg3, [\reg2] ldr \reg1, [\reg2, \reg3] cmp \mode, \reg1 @ matches primary CPU boot mode? - orrne r7, r7, #BOOT_CPU_MODE_MISMATCH - strne r7, [r5, r6] @ record what happened and give up + orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH + strne \reg1, [\reg2, \reg3] @ record what happened and give up .endm #else /* ZIMAGE */ diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 4fb074c446bf..57221e349a7c 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -15,6 +15,7 @@ #include <asm/mmu_context.h> #include <asm/cacheflush.h> #include <asm/mach-types.h> +#include <asm/smp_plat.h> #include <asm/system_misc.h> extern const unsigned char relocate_new_kernel[]; @@ -39,6 +40,14 @@ int machine_kexec_prepare(struct kimage *image) int i, err; /* + * Validate that if the current HW supports SMP, then the SW supports + * and implements CPU hotplug for the current HW. If not, we won't be + * able to kexec reliably, so fail the prepare operation. + */ + if (num_possible_cpus() > 1 && !platform_can_cpu_hotplug()) + return -EINVAL; + + /* * No segment at default ATAGs address. try to locate * a dtb using magic. */ @@ -73,6 +82,7 @@ void machine_crash_nonpanic_core(void *unused) crash_save_cpu(®s, smp_processor_id()); flush_cache_all(); + set_cpu_online(smp_processor_id(), false); atomic_dec(&waiting_for_crash_ipi); while (1) cpu_relax(); @@ -134,10 +144,13 @@ void machine_kexec(struct kimage *image) unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; - if (num_online_cpus() > 1) { - pr_err("kexec: error: multiple CPUs still online\n"); - return; - } + /* + * This can only happen if machine_shutdown() failed to disable some + * CPU, and that can only happen if the checks in + * machine_kexec_prepare() were not correct. If this fails, we can't + * reliably kexec anyway, so BUG_ON is appropriate. + */ + BUG_ON(num_online_cpus() > 1); page_list = image->head & PAGE_MASK; diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d9f5cd4e533f..e186ee1e63f6 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -53,7 +53,12 @@ armpmu_map_cache_event(const unsigned (*cache_map) static int armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) { - int mapping = (*event_map)[config]; + int mapping; + + if (config >= PERF_COUNT_HW_MAX) + return -EINVAL; + + mapping = (*event_map)[config]; return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; } @@ -253,6 +258,9 @@ validate_event(struct pmu_hw_events *hw_events, struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct pmu *leader_pmu = event->group_leader->pmu; + if (is_software_event(event)) + return 1; + if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF) return 1; diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 1f2740e3dbc0..aebe0e99c153 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -157,8 +157,8 @@ static void cpu_pmu_init(struct arm_pmu *cpu_pmu) * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading * junk values out of them. */ -static int __cpuinit cpu_pmu_notify(struct notifier_block *b, - unsigned long action, void *hcpu) +static int cpu_pmu_notify(struct notifier_block *b, unsigned long action, + void *hcpu) { if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) return NOTIFY_DONE; @@ -171,7 +171,7 @@ static int __cpuinit cpu_pmu_notify(struct notifier_block *b, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = { +static struct notifier_block cpu_pmu_hotplug_notifier = { .notifier_call = cpu_pmu_notify, }; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index d3ca4f6915af..94f6b05f9e24 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -197,6 +197,7 @@ void machine_shutdown(void) */ void machine_halt(void) { + local_irq_disable(); smp_send_stop(); local_irq_disable(); @@ -211,6 +212,7 @@ void machine_halt(void) */ void machine_power_off(void) { + local_irq_disable(); smp_send_stop(); if (pm_power_off) @@ -230,6 +232,7 @@ void machine_power_off(void) */ void machine_restart(char *cmd) { + local_irq_disable(); smp_send_stop(); arm_pm_restart(reboot_mode, cmd); @@ -426,10 +429,11 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) } #ifdef CONFIG_MMU +#ifdef CONFIG_KUSER_HELPERS /* * The vectors page is always readable from user space for the - * atomic helpers and the signal restart code. Insert it into the - * gate_vma so that it is visible through ptrace and /proc/<pid>/mem. + * atomic helpers. Insert it into the gate_vma so that it is visible + * through ptrace and /proc/<pid>/mem. */ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, @@ -458,9 +462,48 @@ int in_gate_area_no_mm(unsigned long addr) { return in_gate_area(NULL, addr); } +#define is_gate_vma(vma) ((vma) == &gate_vma) +#else +#define is_gate_vma(vma) 0 +#endif const char *arch_vma_name(struct vm_area_struct *vma) { - return (vma == &gate_vma) ? "[vectors]" : NULL; + return is_gate_vma(vma) ? "[vectors]" : + (vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ? + "[sigpage]" : NULL; +} + +static struct page *signal_page; +extern struct page *get_signal_page(void); + +int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) +{ + struct mm_struct *mm = current->mm; + unsigned long addr; + int ret; + + if (!signal_page) + signal_page = get_signal_page(); + if (!signal_page) + return -ENOMEM; + + down_write(&mm->mmap_sem); + addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0); + if (IS_ERR_VALUE(addr)) { + ret = addr; + goto up_fail; + } + + ret = install_special_mapping(mm, addr, PAGE_SIZE, + VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, + &signal_page); + + if (ret == 0) + mm->context.sigpage = addr; + + up_fail: + up_write(&mm->mmap_sem); + return ret; } #endif diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 219f1d73572a..70ded3fb42d9 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -46,8 +46,7 @@ extern void secondary_startup(void); -static int __cpuinit psci_boot_secondary(unsigned int cpu, - struct task_struct *idle) +static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle) { if (psci_ops.cpu_on) return psci_ops.cpu_on(cpu_logical_map(cpu), diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 63af9a7ae512..afc2489ee13b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -836,6 +836,8 @@ static int __init meminfo_cmp(const void *_a, const void *_b) void __init hyp_mode_check(void) { #ifdef CONFIG_ARM_VIRT_EXT + sync_boot_mode(); + if (is_hyp_mode_available()) { pr_info("CPU: All CPU(s) started in HYP mode.\n"); pr_info("CPU: Virtualization extensions available.\n"); @@ -971,6 +973,7 @@ static const char *hwcap_str[] = { "vfpv4", "idiva", "idivt", + "vfpd32", "lpae", NULL }; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 1c16c35c271a..ab3304225272 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ #include <linux/errno.h> +#include <linux/random.h> #include <linux/signal.h> #include <linux/personality.h> #include <linux/uaccess.h> @@ -15,12 +16,11 @@ #include <asm/elf.h> #include <asm/cacheflush.h> +#include <asm/traps.h> #include <asm/ucontext.h> #include <asm/unistd.h> #include <asm/vfp.h> -#include "signal.h" - /* * For ARM syscalls, we encode the syscall number into the instruction. */ @@ -40,11 +40,13 @@ #define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE)) #define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE)) -const unsigned long sigreturn_codes[7] = { +static const unsigned long sigreturn_codes[7] = { MOV_R7_NR_SIGRETURN, SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN, MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, }; +static unsigned long signal_return_offset; + #ifdef CONFIG_CRUNCH static int preserve_crunch_context(struct crunch_sigframe __user *frame) { @@ -400,14 +402,20 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, __put_user(sigreturn_codes[idx+1], rc+1)) return 1; - if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) { +#ifdef CONFIG_MMU + if (cpsr & MODE32_BIT) { + struct mm_struct *mm = current->mm; + /* - * 32-bit code can use the new high-page - * signal return code support except when the MPU has - * protected the vectors page from PL0 + * 32-bit code can use the signal return page + * except when the MPU has protected the vectors + * page from PL0 */ - retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb; - } else { + retcode = mm->context.sigpage + signal_return_offset + + (idx << 2) + thumb; + } else +#endif + { /* * Ensure that the instruction cache sees * the return code written onto the stack. @@ -608,3 +616,33 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) } while (thread_flags & _TIF_WORK_MASK); return 0; } + +struct page *get_signal_page(void) +{ + unsigned long ptr; + unsigned offset; + struct page *page; + void *addr; + + page = alloc_pages(GFP_KERNEL, 0); + + if (!page) + return NULL; + + addr = page_address(page); + + /* Give the signal return code some randomness */ + offset = 0x200 + (get_random_int() & 0x7fc); + signal_return_offset = offset; + + /* + * Copy signal return handlers into the vector page, and + * set sigreturn to be a pointer to these. + */ + memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes)); + + ptr = (unsigned long)addr + offset; + flush_icache_range(ptr, ptr + sizeof(sigreturn_codes)); + + return page; +} diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h deleted file mode 100644 index 5ff067b7c752..000000000000 --- a/arch/arm/kernel/signal.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * linux/arch/arm/kernel/signal.h - * - * Copyright (C) 2005-2009 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) - -extern const unsigned long sigreturn_codes[7]; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index c5fb5469054b..2dc19349eb19 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -58,7 +58,7 @@ struct secondary_data secondary_data; * control for which core is the next to come out of the secondary * boot "holding pen" */ -volatile int __cpuinitdata pen_release = -1; +volatile int pen_release = -1; enum ipi_msg_type { IPI_WAKEUP, @@ -86,7 +86,7 @@ static unsigned long get_arch_pgd(pgd_t *pgd) return pgdir >> ARCH_PGD_SHIFT; } -int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) +int __cpu_up(unsigned int cpu, struct task_struct *idle) { int ret; @@ -138,13 +138,23 @@ void __init smp_init_cpus(void) smp_ops.smp_init_cpus(); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +int boot_secondary(unsigned int cpu, struct task_struct *idle) { if (smp_ops.smp_boot_secondary) return smp_ops.smp_boot_secondary(cpu, idle); return -ENOSYS; } +int platform_can_cpu_hotplug(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + if (smp_ops.cpu_kill) + return 1; +#endif + + return 0; +} + #ifdef CONFIG_HOTPLUG_CPU static void percpu_timer_stop(void); @@ -170,7 +180,7 @@ static int platform_cpu_disable(unsigned int cpu) /* * __cpu_disable runs on the processor to be shutdown. */ -int __cpuinit __cpu_disable(void) +int __cpu_disable(void) { unsigned int cpu = smp_processor_id(); int ret; @@ -216,7 +226,7 @@ static DECLARE_COMPLETION(cpu_died); * called on the thread which is asking for a CPU to be shutdown - * waits until shutdown has completed, or it is timed out. */ -void __cpuinit __cpu_die(unsigned int cpu) +void __cpu_die(unsigned int cpu) { if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) { pr_err("CPU%u: cpu didn't die\n", cpu); @@ -306,7 +316,7 @@ void __ref cpu_die(void) * Called by both boot and secondaries to move global data into * per-processor storage. */ -static void __cpuinit smp_store_cpu_info(unsigned int cpuid) +static void smp_store_cpu_info(unsigned int cpuid) { struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); @@ -322,7 +332,7 @@ static void percpu_timer_setup(void); * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. */ -asmlinkage void __cpuinit secondary_start_kernel(void) +asmlinkage void secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; unsigned int cpu; @@ -521,7 +531,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode, { } -static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) +static void broadcast_timer_setup(struct clock_event_device *evt) { evt->name = "dummy_timer"; evt->features = CLOCK_EVT_FEAT_ONESHOT | @@ -550,7 +560,7 @@ int local_timer_register(struct local_timer_ops *ops) } #endif -static void __cpuinit percpu_timer_setup(void) +static void percpu_timer_setup(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index a98b62dca2fa..c2edfff573c2 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -70,23 +70,6 @@ static inline void ipi_flush_bp_all(void *ignored) local_flush_bp_all(); } -#ifdef CONFIG_ARM_ERRATA_798181 -static int erratum_a15_798181(void) -{ - unsigned int midr = read_cpuid_id(); - - /* Cortex-A15 r0p0..r3p2 affected */ - if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2) - return 0; - return 1; -} -#else -static int erratum_a15_798181(void) -{ - return 0; -} -#endif - static void ipi_flush_tlb_a15_erratum(void *arg) { dmb(); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index f6fd1d4398c6..25956204ef23 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -187,7 +187,7 @@ core_initcall(twd_cpufreq_init); #endif -static void __cpuinit twd_calibrate_rate(void) +static void twd_calibrate_rate(void) { unsigned long count; u64 waitjiffies; @@ -265,7 +265,7 @@ static void twd_get_clock(struct device_node *np) /* * Setup the local clock events for a CPU. */ -static int __cpuinit twd_timer_setup(struct clock_event_device *clk) +static int twd_timer_setup(struct clock_event_device *clk) { struct clock_event_device **this_cpu_clk; int cpu = smp_processor_id(); @@ -308,7 +308,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk) return 0; } -static struct local_timer_ops twd_lt_ops __cpuinitdata = { +static struct local_timer_ops twd_lt_ops = { .setup = twd_timer_setup, .stop = twd_timer_stop, }; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index cab094c234ee..ab517fcce21b 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -35,8 +35,6 @@ #include <asm/tls.h> #include <asm/system_misc.h> -#include "signal.h" - static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" }; void *vectors_page; @@ -800,15 +798,26 @@ void __init trap_init(void) return; } -static void __init kuser_get_tls_init(unsigned long vectors) +#ifdef CONFIG_KUSER_HELPERS +static void __init kuser_init(void *vectors) { + extern char __kuser_helper_start[], __kuser_helper_end[]; + int kuser_sz = __kuser_helper_end - __kuser_helper_start; + + memcpy(vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); + /* * vectors + 0xfe0 = __kuser_get_tls * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8 */ if (tls_emu || has_tls_reg) - memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4); + memcpy(vectors + 0xfe0, vectors + 0xfe8, 4); } +#else +static void __init kuser_init(void *vectors) +{ +} +#endif void __init early_trap_init(void *vectors_base) { @@ -816,33 +825,30 @@ void __init early_trap_init(void *vectors_base) unsigned long vectors = (unsigned long)vectors_base; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; - extern char __kuser_helper_start[], __kuser_helper_end[]; - int kuser_sz = __kuser_helper_end - __kuser_helper_start; + unsigned i; vectors_page = vectors_base; /* + * Poison the vectors page with an undefined instruction. This + * instruction is chosen to be undefined for both ARM and Thumb + * ISAs. The Thumb version is an undefined instruction with a + * branch back to the undefined instruction. + */ + for (i = 0; i < PAGE_SIZE / sizeof(u32); i++) + ((u32 *)vectors_base)[i] = 0xe7fddef1; + + /* * Copy the vectors, stubs and kuser helpers (in entry-armv.S) * into the vector page, mapped at 0xffff0000, and ensure these * are visible to the instruction stream. */ memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start); - memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start); - memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); + memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start); - /* - * Do processor specific fixups for the kuser helpers - */ - kuser_get_tls_init(vectors); - - /* - * Copy signal return handlers into the vector page, and - * set sigreturn to be a pointer to these. - */ - memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), - sigreturn_codes, sizeof(sigreturn_codes)); + kuser_init(vectors_base); - flush_icache_range(vectors, vectors + PAGE_SIZE); + flush_icache_range(vectors, vectors + PAGE_SIZE * 2); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); #else /* ifndef CONFIG_CPU_V7M */ /* diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index fa25e4e425f6..7bcee5c9b604 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -148,6 +148,23 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_begin = .; #endif + /* + * The vectors and stubs are relocatable code, and the + * only thing that matters is their relative offsets + */ + __vectors_start = .; + .vectors 0 : AT(__vectors_start) { + *(.vectors) + } + . = __vectors_start + SIZEOF(.vectors); + __vectors_end = .; + + __stubs_start = .; + .stubs 0x1000 : AT(__stubs_start) { + *(.stubs) + } + . = __stubs_start + SIZEOF(.stubs); + __stubs_end = .; INIT_TEXT_SECTION(8) .exit.text : { diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index 4a5199070430..db9cf692d4dd 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -146,7 +146,11 @@ static bool pm_fake(struct kvm_vcpu *vcpu, #define access_pmintenclr pm_fake /* Architected CP15 registers. - * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 + * CRn denotes the primary register number, but is copied to the CRm in the + * user space API for 64-bit register access in line with the terminology used + * in the ARM ARM. + * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit + * registers preceding 32-bit ones. */ static const struct coproc_reg cp15_regs[] = { /* CSSELR: swapped by interrupt.S. */ @@ -154,8 +158,8 @@ static const struct coproc_reg cp15_regs[] = { NULL, reset_unknown, c0_CSSELR }, /* TTBR0/TTBR1: swapped by interrupt.S. */ - { CRm( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 }, - { CRm( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 }, + { CRm64( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 }, + { CRm64( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 }, /* TTBCR: swapped by interrupt.S. */ { CRn( 2), CRm( 0), Op1( 0), Op2( 2), is32, @@ -182,7 +186,7 @@ static const struct coproc_reg cp15_regs[] = { NULL, reset_unknown, c6_IFAR }, /* PAR swapped by interrupt.S */ - { CRn( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR }, + { CRm64( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR }, /* * DC{C,I,CI}SW operations: @@ -399,12 +403,13 @@ static bool index_to_params(u64 id, struct coproc_params *params) | KVM_REG_ARM_OPC1_MASK)) return false; params->is_64bit = true; - params->CRm = ((id & KVM_REG_ARM_CRM_MASK) + /* CRm to CRn: see cp15_to_index for details */ + params->CRn = ((id & KVM_REG_ARM_CRM_MASK) >> KVM_REG_ARM_CRM_SHIFT); params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK) >> KVM_REG_ARM_OPC1_SHIFT); params->Op2 = 0; - params->CRn = 0; + params->CRm = 0; return true; default: return false; @@ -898,7 +903,14 @@ static u64 cp15_to_index(const struct coproc_reg *reg) if (reg->is_64) { val |= KVM_REG_SIZE_U64; val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); - val |= (reg->CRm << KVM_REG_ARM_CRM_SHIFT); + /* + * CRn always denotes the primary coproc. reg. nr. for the + * in-kernel representation, but the user space API uses the + * CRm for the encoding, because it is modelled after the + * MRRC/MCRR instructions: see the ARM ARM rev. c page + * B3-1445 + */ + val |= (reg->CRn << KVM_REG_ARM_CRM_SHIFT); } else { val |= KVM_REG_SIZE_U32; val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h index b7301d3e4799..0461d5c8d3de 100644 --- a/arch/arm/kvm/coproc.h +++ b/arch/arm/kvm/coproc.h @@ -135,6 +135,8 @@ static inline int cmp_reg(const struct coproc_reg *i1, return -1; if (i1->CRn != i2->CRn) return i1->CRn - i2->CRn; + if (i1->is_64 != i2->is_64) + return i2->is_64 - i1->is_64; if (i1->CRm != i2->CRm) return i1->CRm - i2->CRm; if (i1->Op1 != i2->Op1) @@ -145,6 +147,7 @@ static inline int cmp_reg(const struct coproc_reg *i1, #define CRn(_x) .CRn = _x #define CRm(_x) .CRm = _x +#define CRm64(_x) .CRn = _x, .CRm = 0 #define Op1(_x) .Op1 = _x #define Op2(_x) .Op2 = _x #define is64 .is_64 = true diff --git a/arch/arm/kvm/coproc_a15.c b/arch/arm/kvm/coproc_a15.c index 685063a6d0cf..cf93472b9dd6 100644 --- a/arch/arm/kvm/coproc_a15.c +++ b/arch/arm/kvm/coproc_a15.c @@ -114,7 +114,11 @@ static bool access_l2ectlr(struct kvm_vcpu *vcpu, /* * A15-specific CP15 registers. - * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 + * CRn denotes the primary register number, but is copied to the CRm in the + * user space API for 64-bit register access in line with the terminology used + * in the ARM ARM. + * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit + * registers preceding 32-bit ones. */ static const struct coproc_reg a15_regs[] = { /* MPIDR: we use VMPIDR for guest access. */ diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index b8e06b7a2833..0c25d9487d53 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -63,7 +63,8 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, struct kvm_exit_mmio *mmio) { - unsigned long rt, len; + unsigned long rt; + int len; bool is_write, sign_extend; if (kvm_vcpu_dabt_isextabt(vcpu)) { diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index ca6bea4859b4..0988d9e04dd4 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -85,6 +85,12 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } +static bool page_empty(void *ptr) +{ + struct page *ptr_page = virt_to_page(ptr); + return page_count(ptr_page) == 1; +} + static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr) { pmd_t *pmd_table = pmd_offset(pud, 0); @@ -103,12 +109,6 @@ static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr) put_page(virt_to_page(pmd)); } -static bool pmd_empty(pmd_t *pmd) -{ - struct page *pmd_page = virt_to_page(pmd); - return page_count(pmd_page) == 1; -} - static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) { if (pte_present(*pte)) { @@ -118,12 +118,6 @@ static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) } } -static bool pte_empty(pte_t *pte) -{ - struct page *pte_page = virt_to_page(pte); - return page_count(pte_page) == 1; -} - static void unmap_range(struct kvm *kvm, pgd_t *pgdp, unsigned long long start, u64 size) { @@ -132,37 +126,37 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp, pmd_t *pmd; pte_t *pte; unsigned long long addr = start, end = start + size; - u64 range; + u64 next; while (addr < end) { pgd = pgdp + pgd_index(addr); pud = pud_offset(pgd, addr); if (pud_none(*pud)) { - addr += PUD_SIZE; + addr = pud_addr_end(addr, end); continue; } pmd = pmd_offset(pud, addr); if (pmd_none(*pmd)) { - addr += PMD_SIZE; + addr = pmd_addr_end(addr, end); continue; } pte = pte_offset_kernel(pmd, addr); clear_pte_entry(kvm, pte, addr); - range = PAGE_SIZE; + next = addr + PAGE_SIZE; /* If we emptied the pte, walk back up the ladder */ - if (pte_empty(pte)) { + if (page_empty(pte)) { clear_pmd_entry(kvm, pmd, addr); - range = PMD_SIZE; - if (pmd_empty(pmd)) { + next = pmd_addr_end(addr, end); + if (page_empty(pmd) && !page_empty(pud)) { clear_pud_entry(kvm, pud, addr); - range = PUD_SIZE; + next = pud_addr_end(addr, end); } } - addr += range; + addr = next; } } diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 64dbfa57204a..5306de350133 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -86,7 +86,7 @@ void __init register_current_timer_delay(const struct delay_timer *timer) } } -unsigned long __cpuinit calibrate_delay_is_known(void) +unsigned long calibrate_delay_is_known(void) { delay_calibrated = true; return lpj_fine; diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 2abee6626aac..916e5a142917 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -227,6 +227,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk), CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk), CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), + CLKDEV_CON_DEV_ID("usart", "f8040000.serial", &uart0_clk), + CLKDEV_CON_DEV_ID("usart", "f8044000.serial", &uart1_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk), diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index dff4ddc5ef81..139e42da25f0 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -75,6 +75,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW_SYNDROME, + .ecc_bits = 4, .bbt_options = NAND_BBT_USE_FLASH, }; diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index afbc439f11d4..4cdb61c54459 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -505,7 +505,7 @@ static struct vpbe_output dm365evm_vpbe_outputs[] = { /* * Amplifiers on the board */ -struct ths7303_platform_data ths7303_pdata = { +static struct ths7303_platform_data ths7303_pdata = { .ch_1 = 3, .ch_2 = 3, .ch_3 = 3, diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index a33686a6fbb2..fa4bfaf952d8 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -153,6 +153,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, + .ecc_bits = 1, .bbt_options = NAND_BBT_USE_FLASH, .timing = &davinci_evm_nandflash_timing, }; diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index fbb8e5ab1dc1..0c005e876cac 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -90,6 +90,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, + .ecc_bits = 1, .options = 0, }; diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 2bc112adf565..808233b60e3d 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -88,6 +88,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { .parts = davinci_ntosd2_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), .ecc_mode = NAND_ECC_HW, + .ecc_bits = 1, .bbt_options = NAND_BBT_USE_FLASH, }; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 42ef53f62c6c..86100d179694 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -860,7 +860,7 @@ static struct platform_device dm355_vpbe_display = { }, }; -struct venc_platform_data dm355_venc_pdata = { +static struct venc_platform_data dm355_venc_pdata = { .setup_pinmux = dm355_vpbe_setup_pinmux, .setup_clock = dm355_venc_setup_clock, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index fa7af5eda52d..dad28029ba9b 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -1349,7 +1349,7 @@ static struct platform_device dm365_vpbe_display = { }, }; -struct venc_platform_data dm365_venc_pdata = { +static struct venc_platform_data dm365_venc_pdata = { .setup_pinmux = dm365_vpbe_setup_pinmux, .setup_clock = dm365_venc_setup_clock, }; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 855d4a7b462d..5952e68c76c4 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -92,6 +92,7 @@ config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y depends on ARCH_EXYNOS5 + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_HAS_OPP select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index e970a7a4e278..53696154aead 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -14,7 +14,7 @@ obj- := obj-$(CONFIG_ARCH_EXYNOS) += common.o -obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_S5P_PM) += pm.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 164685bd25c8..ba95e5db2501 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -58,7 +58,6 @@ static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); static void exynos5_map_io(void); -static void exynos5440_map_io(void); static int exynos_init(void); static struct cpu_table cpu_ids[] __initdata = { @@ -95,7 +94,6 @@ static struct cpu_table cpu_ids[] __initdata = { }, { .idcode = EXYNOS5440_SOC_ID, .idmask = EXYNOS5_SOC_MASK, - .map_io = exynos5440_map_io, .init = exynos_init, .name = name_exynos5440, }, @@ -150,11 +148,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_64K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(EXYNOS4_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, @@ -268,20 +261,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS5_PA_PMU), .length = SZ_64K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(EXYNOS5_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos5440_iodesc0[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(EXYNOS5440_PA_UART0), - .length = SZ_512K, - .type = MT_DEVICE, }, }; @@ -388,11 +367,6 @@ static void __init exynos5_map_io(void) iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } -static void __init exynos5440_map_io(void) -{ - iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); -} - void __init exynos_init_time(void) { of_clk_init(NULL); diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 3e156bcddcb4..972490fc09d6 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -97,6 +97,5 @@ struct exynos_pmu_conf { }; extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); -extern void s3c_cpu_resume(void); #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 17a18ff3d71e..225ee8431c72 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -25,6 +25,7 @@ #include <mach/regs-pmu.h> #include <plat/cpu.h> +#include <plat/pm.h> #include "common.h" diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S index 5364d4bfa8bc..cdd9d91e9933 100644 --- a/arch/arm/mach-exynos/headsmp.S +++ b/arch/arm/mach-exynos/headsmp.S @@ -13,8 +13,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __CPUINIT - /* * exynos4 specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h index 374ef2cf7152..2a4cdb7cb326 100644 --- a/arch/arm/mach-exynos/include/mach/memory.h +++ b/arch/arm/mach-exynos/include/mach/memory.h @@ -15,8 +15,13 @@ #define PLAT_PHYS_OFFSET UL(0x40000000) +#ifndef CONFIG_ARM_LPAE /* Maximum of 256MiB in one bank */ #define MAX_PHYSMEM_BITS 32 #define SECTION_SIZE_BITS 28 +#else +#define MAX_PHYSMEM_BITS 36 +#define SECTION_SIZE_BITS 31 +#endif #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index deba1308ff16..58b43e6f9262 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -75,7 +75,7 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); -static void __cpuinit exynos_secondary_init(unsigned int cpu) +static void exynos_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -90,7 +90,7 @@ static void __cpuinit exynos_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; unsigned long phys_cpu = cpu_logical_map(cpu); diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 41c20692a13f..c679db577269 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -217,6 +217,9 @@ static __init int exynos_pm_drvinit(void) struct clk *pll_base; unsigned int tmp; + if (soc_is_exynos5440()) + return 0; + s3c_pm_init(); /* All wakeup disable */ @@ -340,6 +343,9 @@ static struct syscore_ops exynos_pm_syscore_ops = { static __init int exynos_pm_syscore_init(void) { + if (soc_is_exynos5440()) + return 0; + register_syscore_ops(&exynos_pm_syscore_ops); return 0; } diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index a7cd2cf5e08d..3490a24f969e 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -276,8 +276,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) sys->mem_offset = DC21285_PCI_MEM; - pci_ioremap_io(0, DC21285_PCI_IO); - pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index dc5d6becd8c7..88815795fe26 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -115,6 +115,7 @@ static int highbank_platform_notifier(struct notifier_block *nb, { struct resource *res; int reg = -1; + u32 val; struct device *dev = __dev; if (event != BUS_NOTIFY_ADD_DEVICE) @@ -141,10 +142,10 @@ static int highbank_platform_notifier(struct notifier_block *nb, return NOTIFY_DONE; if (of_property_read_bool(dev->of_node, "dma-coherent")) { - writel(0xff31, sregs_base + reg); + val = readl(sregs_base + reg); + writel(val | 0xff01, sregs_base + reg); set_dma_ops(dev, &arm_coherent_dma_ops); - } else - writel(0, sregs_base + reg); + } return NOTIFY_OK; } diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index a984573e0d02..32d75cf55cbc 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -24,7 +24,7 @@ extern void secondary_startup(void); -static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { highbank_set_cpu_jump(cpu, secondary_startup); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4282e99f5ca1..86567d980b07 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -199,7 +199,8 @@ static const char *pcie_axi_sels[] = { "axi", "ahb", }; static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; -static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; +static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", @@ -392,7 +393,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels)); - clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels)); + clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels)); clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels)); clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels)); clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index d617c0b7c809..b169a396d93b 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -183,6 +183,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7); clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24); clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23); + clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0)); + clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1)); clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7)); diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h index e074616d54ca..8a65f192e7f3 100644 --- a/arch/arm/mach-imx/mx27.h +++ b/arch/arm/mach-imx/mx27.h @@ -135,7 +135,7 @@ #define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4) #define MX27_INT_RTIC (NR_IRQS_LEGACY + 5) #define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6) -#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7) +#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7) #define MX27_INT_GPIO (NR_IRQS_LEGACY + 8) #define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9) #define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10) diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index c6e1ab544882..1f24c1fdfea4 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -53,7 +53,7 @@ void imx_scu_standby_enable(void) writel_relaxed(val, scu_base); } -static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); imx_enable_cpu(cpu, true); diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index fe4d9ff93a7e..b661c5c2870a 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -49,7 +49,7 @@ static const char *keystone_match[] __initconst = { NULL, }; -void keystone_restart(char mode, const char *cmd) +void keystone_restart(enum reboot_mode mode, const char *cmd) { u32 val; diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 1d4181e1daf2..14378e3fef16 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -21,7 +21,7 @@ #include "keystone.h" -static int __cpuinit keystone_smp_boot_secondary(unsigned int cpu, +static int keystone_smp_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long start = virt_to_phys(&secondary_startup); diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 614e41e7881b..905efc8cac79 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -121,8 +121,7 @@ config MSM_SMD bool config MSM_GPIOMUX - depends on !(ARCH_MSM8X60 || ARCH_MSM8960) - bool "MSM V1 TLMM GPIOMUX architecture" + bool help Support for MSM V1 TLMM GPIOMUX architecture. diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c deleted file mode 100644 index 27de2abd7144..000000000000 --- a/arch/arm/mach-msm/gpiomux-v1.c +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/kernel.h> -#include "gpiomux.h" -#include "proc_comm.h" - -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) -{ - unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | - ((gpio & 0x3ff) << 4); - unsigned tlmm_disable = 0; - int rc; - - rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, - &tlmm_config, &tlmm_disable); - if (rc) - pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", - __func__, rc, tlmm_config, tlmm_disable); -} diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h index 8e82f41a8923..4410d7766f93 100644 --- a/arch/arm/mach-msm/gpiomux.h +++ b/arch/arm/mach-msm/gpiomux.h @@ -73,16 +73,6 @@ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, gpiomux_config_t suspended); - -/* Architecture-internal function for use by the framework only. - * This function can assume the following: - * - the gpio value has passed a bounds-check - * - the gpiomux spinlock has been obtained - * - * This function is not for public consumption. External users - * should use msm_gpiomux_write. - */ -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); #else static inline int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S index bcd5af223dea..6c62c3f82fe6 100644 --- a/arch/arm/mach-msm/headsmp.S +++ b/arch/arm/mach-msm/headsmp.S @@ -11,8 +11,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __CPUINIT - /* * MSM specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 00cdb0a5dac8..3f06edcdd0ce 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -38,7 +38,7 @@ static inline int get_core_count(void) return ((read_cpuid_id() >> 4) & 3) + 1; } -static void __cpuinit msm_secondary_init(unsigned int cpu) +static void msm_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -54,7 +54,7 @@ static void __cpuinit msm_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static __cpuinit void prepare_cold_cpu(unsigned int cpu) +static void prepare_cold_cpu(unsigned int cpu) { int ret; ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup), @@ -73,7 +73,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu) "address\n"); } -static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; static int cold_boot_done; diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index b6418fd5fe0d..8697cfc0d0b6 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -139,7 +139,7 @@ static struct clocksource msm_clocksource = { }; #ifdef CONFIG_LOCAL_TIMERS -static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt) +static int msm_local_timer_setup(struct clock_event_device *evt) { /* Use existing clock_event for cpu 0 */ if (!smp_processor_id()) @@ -164,7 +164,7 @@ static void msm_local_timer_stop(struct clock_event_device *evt) disable_percpu_irq(evt->irq); } -static struct local_timer_ops msm_local_timer_ops __cpuinitdata = { +static struct local_timer_ops msm_local_timer_ops = { .setup = msm_local_timer_setup, .stop = msm_local_timer_stop, }; diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index be117591f7f2..4c24303ec481 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -28,7 +28,7 @@ #include <asm/cacheflush.h> #include "armada-370-xp.h" -unsigned long __cpuinitdata coherency_phys_base; +unsigned long coherency_phys_base; static void __iomem *coherency_base; static void __iomem *coherency_cpu_base; diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S index 7147300c8af2..8a1b0c96e9ec 100644 --- a/arch/arm/mach-mvebu/headsmp.S +++ b/arch/arm/mach-mvebu/headsmp.S @@ -21,8 +21,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __CPUINIT - /* * Armada XP specific entry point for secondary CPUs. * We add the CPU to the coherency fabric and then jump to secondary diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index 93f2f3ab45f1..ce81d3031405 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -71,13 +71,12 @@ void __init set_secondary_cpus_clock(void) } } -static void __cpuinit armada_xp_secondary_init(unsigned int cpu) +static void armada_xp_secondary_init(unsigned int cpu) { armada_xp_mpic_smp_cpu_init(); } -static int __cpuinit armada_xp_boot_secondary(unsigned int cpu, - struct task_struct *idle) +static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) { pr_info("Booting CPU %d\n", cpu); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 627fa7e41fba..3eed0006d189 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,7 +62,7 @@ config SOC_OMAP5 select HAVE_SMP select COMMON_CLK select HAVE_ARM_ARCH_TIMER - select ARM_ERRATA_798181 + select ARM_ERRATA_798181 if SMP config SOC_AM33XX bool "AM33XX support" diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index e5fbfed69aa2..be5d005ebad2 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,6 +15,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/irqdomain.h> +#include <linux/clk.h> #include <asm/mach/arch.h> @@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = { { } }; +/* + * Create alias for USB host PHY clock. + * Remove this when clock phandle can be provided via DT + */ +static void __init legacy_init_ehci_clk(char *clkname) +{ + int ret; + + ret = clk_add_alias("main_clk", NULL, clkname, NULL); + if (ret) { + pr_err("%s:Failed to add main_clk alias to %s :%d\n", + __func__, clkname, ret); + } +} + static void __init omap_generic_init(void) { omap_sdrc_init(NULL, NULL); @@ -45,10 +61,15 @@ static void __init omap_generic_init(void) * HACK: call display setup code for selected boards to enable omapdss. * This will be removed when omapdss supports DT. */ - if (of_machine_is_compatible("ti,omap4-panda")) + if (of_machine_is_compatible("ti,omap4-panda")) { omap4_panda_display_init_of(); + legacy_init_ehci_clk("auxclk3_ck"); + + } else if (of_machine_is_compatible("ti,omap4-sdp")) omap_4430sdp_display_init_of(); + else if (of_machine_is_compatible("ti,omap5-uevm")) + legacy_init_ehci_clk("auxclk1_ck"); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index f6eeb87e4e95..827d15009a86 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -122,11 +122,7 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#else - .mode = MUSB_HOST, -#endif .set_power = tusb_set_power, .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */ .power = 100, /* Max 100 mA VBUS for host mode */ diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index d2ea68ea678a..7735105561d8 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -85,7 +85,7 @@ static struct omap_board_mux board_mux[] __initdata = { static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_PERIPHERAL, + .mode = MUSB_OTG, .power = 0, }; diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 393aeefaebb0..043e5705f2a6 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -42,7 +42,7 @@ /* Using generic display panel */ static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, + .i2c_bus_num = 2, .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, }; diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4ea308114165..75e92952c18e 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -20,8 +20,6 @@ #include "omap44xx.h" - __CPUINIT - /* Physical address needed since MMU not enabled yet on secondary core */ #define AUX_CORE_BOOT0_PA 0x48281800 diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index f993a4188701..f991016e2a6a 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -291,7 +291,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * @cpu : CPU ID * @power_state: CPU low power state. */ -int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) +int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); unsigned int cpu_state = 0; diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 98a11463a843..8708b2a9da45 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -51,7 +51,7 @@ void __iomem *omap4_get_scu_base(void) return scu_base; } -static void __cpuinit omap4_secondary_init(unsigned int cpu) +static void omap4_secondary_init(unsigned int cpu) { /* * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. @@ -72,7 +72,7 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) { static struct clockdomain *cpu1_clkdm; static bool booted; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index f8bb3b9b6a76..813c61558a5f 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -323,8 +323,8 @@ static void irq_save_secure_context(void) #endif #ifdef CONFIG_HOTPLUG_CPU -static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self, - unsigned long action, void *hcpu) +static int irq_cpu_hotplug_notify(struct notifier_block *self, + unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)hcpu; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 5cc92874be7e..f99f68e1e85b 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; const char *oh_name; int oh_cnt, i, ret = 0; + bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (oh_cnt <= 0) { @@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } hwmods[i] = oh; + if (oh->flags & HWMOD_INIT_NO_IDLE) + device_active = true; } od = omap_device_alloc(pdev, hwmods, oh_cnt); @@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev) pdev->dev.pm_domain = &omap_device_pm_domain; + if (device_active) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + odbfd_exit1: kfree(hwmods); odbfd_exit: @@ -842,6 +850,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); + int i; if (!od) return 0; @@ -850,6 +859,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data) * If omap_device state is enabled, but has no driver bound, * idle it. */ + + /* + * Some devices (like memory controllers) are always kept + * enabled, and should not be idled even with no drivers. + */ + for (i = 0; i < od->hwmods_cnt; i++) + if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE) + return 0; + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { dev_warn(dev, "%s: enabled but no driver. Idling\n", diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 7341eff63f56..7f4db12b1459 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); if (np) - va_start = of_iomap(np, 0); + va_start = of_iomap(np, oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index aab33fd814c0..e1482a9b3bc2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; #define MODULEMODE_HWCTRL 1 #define MODULEMODE_SWCTRL 2 +#define DEBUG_OMAP2UART1_FLAGS 0 +#define DEBUG_OMAP2UART2_FLAGS 0 +#define DEBUG_OMAP2UART3_FLAGS 0 +#define DEBUG_OMAP3UART3_FLAGS 0 +#define DEBUG_OMAP3UART4_FLAGS 0 +#define DEBUG_OMAP4UART3_FLAGS 0 +#define DEBUG_OMAP4UART4_FLAGS 0 +#define DEBUG_TI81XXUART1_FLAGS 0 +#define DEBUG_TI81XXUART2_FLAGS 0 +#define DEBUG_TI81XXUART3_FLAGS 0 +#define DEBUG_AM33XXUART1_FLAGS 0 + +#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) + +#if defined(CONFIG_DEBUG_OMAP2UART1) +#undef DEBUG_OMAP2UART1_FLAGS +#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART2) +#undef DEBUG_OMAP2UART2_FLAGS +#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART3) +#undef DEBUG_OMAP2UART3_FLAGS +#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART3) +#undef DEBUG_OMAP3UART3_FLAGS +#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART4) +#undef DEBUG_OMAP3UART4_FLAGS +#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART3) +#undef DEBUG_OMAP4UART3_FLAGS +#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART4) +#undef DEBUG_OMAP4UART4_FLAGS +#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART1) +#undef DEBUG_TI81XXUART1_FLAGS +#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART2) +#undef DEBUG_TI81XXUART2_FLAGS +#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART3) +#undef DEBUG_TI81XXUART3_FLAGS +#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_AM33XXUART1) +#undef DEBUG_AM33XXUART1_FLAGS +#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#endif /** * struct omap_hwmod_mux_info - hwmod specific mux configuration @@ -568,6 +616,7 @@ struct omap_hwmod_link { * @voltdm: pointer to voltage domain (filled in at runtime) * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags + * @mpu_rt_idx: index of device address space for register target (for DT boot) * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port: cached MPU register target slave (internal use) * @opt_clks_cnt: number of @opt_clks @@ -617,6 +666,7 @@ struct omap_hwmod { struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; u16 flags; + u8 mpu_rt_idx; u8 response_lat; u8 rst_lines_cnt; u8 opt_clks_cnt; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index d05fc7b54567..56cebb05509e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 28bbd56346a9..eb2f3b93b51c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { .clkdm_name = "cpsw_125mhz_clkdm", .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), .main_clk = "cpsw_125mhz_gclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET, @@ -1512,7 +1513,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "dpll_per_m2_div4_wkupdm_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f7a3df2fb579..0c3a427da544 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | + HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d04b5e60fdbe..9c3b504477d7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index f37ae96b70a1..3c70f5c1860f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = { .name = "uart3", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = DEBUG_OMAP4UART3_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = { .name = "uart4", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = DEBUG_OMAP4UART4_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3a674de6cb63..a388f8c1bcb3 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void) pr_info("%s used as console in debug mode: uart%d clocks will not be gated", uart_name, uart->num); } - - /* - * omap-uart can be used for earlyprintk logs - * So if omap-uart is used as console then prevent - * uart reset and idle to get logs from omap-uart - * until uart console driver is available to take - * care for console messages. - * Idling or resetting omap-uart while printing logs - * early boot logs can stall the boot-up. - */ - oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; } } while (1); diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 8c4de2708cf2..bc897231bd10 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -38,11 +38,8 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#else - .mode = MUSB_HOST, -#endif + /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S index 5b8a408d8921..d86fe33c5f53 100644 --- a/arch/arm/mach-prima2/headsmp.S +++ b/arch/arm/mach-prima2/headsmp.S @@ -9,8 +9,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __CPUINIT - /* * SIRFSOC specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 1c3de7bed841..3dbcb1ab6e37 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -44,7 +44,7 @@ void __init sirfsoc_map_scu(void) scu_base = (void __iomem *)SIRFSOC_VA(base); } -static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) +static void sirfsoc_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -65,7 +65,7 @@ static struct of_device_id rsc_ids[] = { {}, }; -static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; struct device_node *np; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index f6726bb4eb95..3a3362fa793e 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -477,16 +477,24 @@ static int em_x270_usb_hub_init(void) /* USB Hub power-on and reset */ gpio_direction_output(usb_hub_reset, 1); gpio_direction_output(GPIO9_USB_VBUS_EN, 0); - regulator_enable(em_x270_usb_ldo); + err = regulator_enable(em_x270_usb_ldo); + if (err) + goto err_free_rst_gpio; + gpio_set_value(usb_hub_reset, 0); gpio_set_value(usb_hub_reset, 1); regulator_disable(em_x270_usb_ldo); - regulator_enable(em_x270_usb_ldo); + err = regulator_enable(em_x270_usb_ldo); + if (err) + goto err_free_rst_gpio; + gpio_set_value(usb_hub_reset, 0); gpio_set_value(GPIO9_USB_VBUS_EN, 1); return 0; +err_free_rst_gpio: + gpio_free(usb_hub_reset); err_free_vbus_gpio: gpio_free(GPIO9_USB_VBUS_EN); err_free_usb_ldo: @@ -592,7 +600,7 @@ err_irq: return err; } -static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) +static int em_x270_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; @@ -600,10 +608,11 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000; regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV); - regulator_enable(em_x270_sdio_ldo); + return regulator_enable(em_x270_sdio_ldo); } else { regulator_disable(em_x270_sdio_ldo); } + return 0; } static void em_x270_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d2c652318376..dd70343c8708 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -408,7 +408,7 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in return err; } -static void mainstone_mci_setpower(struct device *dev, unsigned int vdd) +static int mainstone_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; @@ -420,6 +420,7 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd) printk(KERN_DEBUG "%s: off\n", __func__); MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON; } + return 0; } static void mainstone_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index fb7f1d1627dc..13e5b00eae90 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -335,7 +335,7 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, return err; } -static void pcm990_mci_setpower(struct device *dev, unsigned int vdd) +static int pcm990_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data *p_d = dev->platform_data; u8 val; @@ -348,6 +348,7 @@ static void pcm990_mci_setpower(struct device *dev, unsigned int vdd) val &= ~PCM990_CTRL_MMC2PWR; pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5); + return 0; } static void pcm990_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 711d37e26bd8..aedf053a1de5 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -258,7 +258,7 @@ err_free_2: return err; } -static void poodle_mci_setpower(struct device *dev, unsigned int vdd) +static int poodle_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; @@ -270,6 +270,8 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd) gpio_set_value(POODLE_GPIO_SD_PWR1, 0); gpio_set_value(POODLE_GPIO_SD_PWR, 0); } + + return 0; } static void poodle_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2125df0444e7..4c29173026e8 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -598,7 +598,7 @@ static inline void spitz_spi_init(void) {} * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to * give the card a chance to fully insert/eject. */ -static void spitz_mci_setpower(struct device *dev, unsigned int vdd) +static int spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; @@ -606,6 +606,8 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V); else spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0); + + return 0; } static struct pxamci_platform_data spitz_mci_platform_data = { diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 88fde43c948c..62aea3e835f3 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -734,9 +734,10 @@ static int stargate2_mci_init(struct device *dev, * * Very simple control. Either it is on or off and is controlled by * a gpio pin */ -static void stargate2_mci_setpower(struct device *dev, unsigned int vdd) +static int stargate2_mci_setpower(struct device *dev, unsigned int vdd) { gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd); + return 0; } static void stargate2_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 6d9252e081ce..7791ac76f945 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -208,7 +208,7 @@ config S3C24XX_GPIO_EXTRA128 config S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on ARM_S3C24XX + depends on ARM_S3C24XX_CPUFREQ help Compile in support for changing the PLL frequency from the S3C24XX series CPUfreq driver. The PLL takes time to settle diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c index 34fffdf6fc1d..564553694b54 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c @@ -119,66 +119,101 @@ static struct clk init_clocks_off[] = { } }; -static struct clk init_clocks[] = { - { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, - }, { - .name = "uart", - .devname = "s3c2410-uart.0", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2410-uart.1", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2410-uart.2", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus, - }, { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, - }, +static struct clk clk_lcd = { + .name = "lcd", + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_LCDC, +}; + +static struct clk clk_gpio = { + .name = "gpio", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_GPIO, +}; + +static struct clk clk_usb_host = { + .name = "usb-host", + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBH, +}; + +static struct clk clk_usb_device = { + .name = "usb-device", + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBD, +}; + +static struct clk clk_timers = { + .name = "timers", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_PWMT, +}; + +struct clk s3c24xx_clk_uart0 = { + .name = "uart", + .devname = "s3c2410-uart.0", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART0, +}; + +struct clk s3c24xx_clk_uart1 = { + .name = "uart", + .devname = "s3c2410-uart.1", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART1, +}; + +struct clk s3c24xx_clk_uart2 = { + .name = "uart", + .devname = "s3c2410-uart.2", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART2, +}; + +static struct clk clk_rtc = { + .name = "rtc", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_RTC, +}; + +static struct clk clk_watchdog = { + .name = "watchdog", + .parent = &clk_p, + .ctrlbit = 0, +}; + +static struct clk clk_usb_bus_host = { + .name = "usb-bus-host", + .parent = &clk_usb_bus, +}; + +static struct clk clk_usb_bus_gadget = { + .name = "usb-bus-gadget", + .parent = &clk_usb_bus, +}; + +static struct clk *init_clocks[] = { + &clk_lcd, + &clk_gpio, + &clk_usb_host, + &clk_usb_device, + &clk_timers, + &s3c24xx_clk_uart0, + &s3c24xx_clk_uart1, + &s3c24xx_clk_uart2, + &clk_rtc, + &clk_watchdog, + &clk_usb_bus_host, + &clk_usb_bus_gadget, }; /* s3c2410_baseclk_add() @@ -195,7 +230,6 @@ int __init s3c2410_baseclk_add(void) { unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *clkp; struct clk *xtal; int ret; int ptr; @@ -207,8 +241,9 @@ int __init s3c2410_baseclk_add(void) /* register clocks from clock array */ - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) { + struct clk *clkp = init_clocks[ptr]; + /* ensure that we note the clock state */ clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 1069b5680826..aaf006d1d6dc 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -166,6 +166,9 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), + CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0), + CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1), + CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2), CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), }; diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e115f6742107..c5be60d85e4b 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1162,9 +1162,6 @@ static void __init eva_init(void) gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ - /* Touchscreen */ - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ - /* GETHER */ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index d5554646916c..3354a85c90f7 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -167,7 +167,13 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "usb1", "usb1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0", "sdhi0"), + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_wp", "sdhi0"), }; #define FPGA 0x18200000 diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index d73e21d3ea8a..8d6bd5c5efb9 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -59,7 +59,7 @@ static __initdata struct gpio_led_platform_data lager_leds_pdata = { #define GPIO_KEY(c, g, d, ...) \ { .code = c, .gpio = g, .desc = d, .active_low = 1 } -static __initdata struct gpio_keys_button gpio_buttons[] = { +static struct gpio_keys_button gpio_buttons[] = { GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index 6f9865467258..bfd920083a3b 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -23,7 +23,6 @@ #include <linux/init.h> #include <asm/memory.h> - __CPUINIT /* * Boot code for secondary CPUs. * diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 559d1ce5f57e..a9d212498987 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -14,8 +14,6 @@ #include <linux/init.h> #include <asm/memory.h> - __CPUINIT - ENTRY(shmobile_invalidate_start) bl v7_invalidate_l1 b secondary_startup diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 80991b35f4ac..22a05a869d25 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -30,7 +30,7 @@ #define EMEV2_SCU_BASE 0x1e000000 -static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu))); return 0; diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 526cfaae81c1..9bdf810f2a87 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -81,7 +81,7 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) return ret ? ret : 1; } -static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { struct r8a7779_pm_ch *ch = NULL; int ret = -EIO; diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index d613113a04bd..d5fc3ed4e315 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -48,7 +48,7 @@ void __init sh73a0_register_twd(void) } #endif -static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index 9004bfb1756e..95c115d8b5ee 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -10,7 +10,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __CPUINIT .arch armv7-a ENTRY(secondary_trampoline) diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index b51ce8c7929d..5356a72bc8ce 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -29,7 +29,7 @@ #include "core.h" -static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h index 904f2c907b46..a99d90a4d09c 100644 --- a/arch/arm/mach-spear/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -37,7 +37,7 @@ void __init spear13xx_l2x0_init(void); void spear_restart(enum reboot_mode, const char *); void spear13xx_secondary_startup(void); -void __cpuinit spear13xx_cpu_die(unsigned int cpu); +void spear13xx_cpu_die(unsigned int cpu); extern struct smp_operations spear13xx_smp_ops; diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index 9c4c722c954e..5c4a19887b2b 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -24,7 +24,7 @@ static DEFINE_SPINLOCK(boot_lock); static void __iomem *scu_base = IOMEM(VA_SCU_BASE); -static void __cpuinit spear13xx_secondary_init(unsigned int cpu) +static void spear13xx_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -40,7 +40,7 @@ static void __cpuinit spear13xx_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static int __cpuinit spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index d04e3bfe1918..835833e3c4f8 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -11,8 +11,9 @@ menuconfig ARCH_STI select HAVE_SMP select HAVE_ARM_SCU if SMP select ARCH_REQUIRE_GPIOLIB - select ARM_ERRATA_720789 select ARM_ERRATA_754322 + select ARM_ERRATA_764369 + select ARM_ERRATA_775420 select PL310_ERRATA_753970 if CACHE_PL310 select PL310_ERRATA_769419 if CACHE_PL310 help diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S index 78ebc7559f53..4c09bae86edf 100644 --- a/arch/arm/mach-sti/headsmp.S +++ b/arch/arm/mach-sti/headsmp.S @@ -16,8 +16,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT - /* * ST specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c index 977a863468fc..dce50d983a8e 100644 --- a/arch/arm/mach-sti/platsmp.c +++ b/arch/arm/mach-sti/platsmp.c @@ -27,7 +27,7 @@ #include "smp.h" -static void __cpuinit write_pen_release(int val) +static void write_pen_release(int val) { pen_release = val; smp_wmb(); @@ -37,7 +37,7 @@ static void __cpuinit write_pen_release(int val) static DEFINE_SPINLOCK(boot_lock); -void __cpuinit sti_secondary_init(unsigned int cpu) +void sti_secondary_init(unsigned int cpu) { trace_hardirqs_off(); @@ -54,7 +54,7 @@ void __cpuinit sti_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -int __cpuinit sti_boot_secondary(unsigned int cpu, struct task_struct *idle) +int sti_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 24db4ac428ae..97b33a2a2d75 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -35,7 +35,7 @@ static cpumask_t tegra_cpu_init_mask; -static void __cpuinit tegra_secondary_init(unsigned int cpu) +static void tegra_secondary_init(unsigned int cpu) { cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } @@ -167,7 +167,7 @@ static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle) return ret; } -static int __cpuinit tegra_boot_secondary(unsigned int cpu, +static int tegra_boot_secondary(unsigned int cpu, struct task_struct *idle) { if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 94e69bee3da5..261fec140c06 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -191,7 +191,7 @@ static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = { [TEGRA_SUSPEND_LP0] = "LP0", }; -static int __cpuinit tegra_suspend_enter(suspend_state_t state) +static int tegra_suspend_enter(suspend_state_t state) { enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 14d90469392f..1f296e796a4f 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -54,7 +54,7 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); -static void __cpuinit ux500_secondary_init(unsigned int cpu) +static void ux500_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -69,7 +69,7 @@ static void __cpuinit ux500_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 5b799c29886e..5f252569c689 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -91,7 +91,7 @@ static void __init zynq_map_io(void) zynq_scu_map_io(); } -static void zynq_system_reset(char mode, const char *cmd) +static void zynq_system_reset(enum reboot_mode mode, const char *cmd) { zynq_slcr_system_reset(); } diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index fbbd0e21c404..3040d219570f 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -27,7 +27,7 @@ extern void secondary_startup(void); extern char zynq_secondary_trampoline; extern char zynq_secondary_trampoline_jump; extern char zynq_secondary_trampoline_end; -extern int __cpuinit zynq_cpun_start(u32 address, int cpu); +extern int zynq_cpun_start(u32 address, int cpu); extern struct smp_operations zynq_smp_ops __initdata; #endif diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S index d183cd234a9b..d4cd5f34fe5c 100644 --- a/arch/arm/mach-zynq/headsmp.S +++ b/arch/arm/mach-zynq/headsmp.S @@ -9,8 +9,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __CPUINIT - ENTRY(zynq_secondary_trampoline) ldr r0, [pc] bx r0 diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c index 023f225493f2..689fbbc3d9c8 100644 --- a/arch/arm/mach-zynq/platsmp.c +++ b/arch/arm/mach-zynq/platsmp.c @@ -30,11 +30,11 @@ /* * Store number of cores in the system * Because of scu_get_core_count() must be in __init section and can't - * be called from zynq_cpun_start() because it is in __cpuinit section. + * be called from zynq_cpun_start() because it is not in __init section. */ static int ncores; -int __cpuinit zynq_cpun_start(u32 address, int cpu) +int zynq_cpun_start(u32 address, int cpu) { u32 trampoline_code_size = &zynq_secondary_trampoline_end - &zynq_secondary_trampoline; @@ -92,7 +92,7 @@ int __cpuinit zynq_cpun_start(u32 address, int cpu) } EXPORT_SYMBOL(zynq_cpun_start); -static int __cpuinit zynq_boot_secondary(unsigned int cpu, +static int zynq_boot_secondary(unsigned int cpu, struct task_struct *idle) { return zynq_cpun_start(virt_to_phys(secondary_startup), cpu); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 6cacdc8dd654..cd2c88e7a8f7 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -421,24 +421,28 @@ config CPU_32v3 select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v4 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v4T bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v5 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v6 bool @@ -776,6 +780,7 @@ config CPU_BPREDICT_DISABLE config TLS_REG_EMUL bool + select NEED_KUSER_HELPERS help An SMP system using a pre-ARMv6 processor (there are apparently a few prototypes like that in existence) and therefore access to @@ -783,11 +788,43 @@ config TLS_REG_EMUL config NEEDS_SYSCALL_FOR_CMPXCHG bool + select NEED_KUSER_HELPERS help SMP on a pre-ARMv6 processor? Well OK then. Forget about fast user space cmpxchg support. It is just not possible. +config NEED_KUSER_HELPERS + bool + +config KUSER_HELPERS + bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS + default y + help + Warning: disabling this option may break user programs. + + Provide kuser helpers in the vector page. The kernel provides + helper code to userspace in read only form at a fixed location + in the high vector page to allow userspace to be independent of + the CPU type fitted to the system. This permits binaries to be + run on ARMv4 through to ARMv7 without modification. + + See Documentation/arm/kernel_user_helpers.txt for details. + + However, the fixed address nature of these helpers can be used + by ROP (return orientated programming) authors when creating + exploits. + + If all of the binaries and libraries which run on your platform + are built specifically for your platform, and make no use of + these helpers, then you can turn this option off to hinder + such exploits. However, in that case, if a binary or library + relying on those helpers is run, it will receive a SIGILL signal, + which will terminate the program. + + Say N here only if you are absolutely certain that you do not + need these helpers; otherwise, the safe option is to say Y. + config DMA_CACHE_RWFO bool "Enable read/write for ownership DMA cache maintenance" depends on CPU_V6K && SMP diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b55b1015724b..4a0544492f10 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -245,7 +245,8 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) { local_flush_bp_all(); local_flush_tlb_all(); - dummy_flush_tlb_a15_erratum(); + if (erratum_a15_798181()) + dummy_flush_tlb_a15_erratum(); } atomic64_set(&per_cpu(active_asids, cpu), asid); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4f56617a2392..53cdbd39ec8e 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -989,6 +989,7 @@ phys_addr_t arm_lowmem_limit __initdata = 0; void __init sanity_check_meminfo(void) { + phys_addr_t memblock_limit = 0; int i, j, highmem = 0; phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; @@ -1052,9 +1053,32 @@ void __init sanity_check_meminfo(void) bank->size = size_limit; } #endif - if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit) - arm_lowmem_limit = bank->start + bank->size; + if (!bank->highmem) { + phys_addr_t bank_end = bank->start + bank->size; + if (bank_end > arm_lowmem_limit) + arm_lowmem_limit = bank_end; + + /* + * Find the first non-section-aligned page, and point + * memblock_limit at it. This relies on rounding the + * limit down to be section-aligned, which happens at + * the end of this function. + * + * With this algorithm, the start or end of almost any + * bank can be non-section-aligned. The only exception + * is that the start of the bank 0 must be section- + * aligned, since otherwise memory would need to be + * allocated when mapping the start of bank 0, which + * occurs before any free memory is mapped. + */ + if (!memblock_limit) { + if (!IS_ALIGNED(bank->start, SECTION_SIZE)) + memblock_limit = bank->start; + else if (!IS_ALIGNED(bank_end, SECTION_SIZE)) + memblock_limit = bank_end; + } + } j++; } #ifdef CONFIG_HIGHMEM @@ -1079,7 +1103,18 @@ void __init sanity_check_meminfo(void) #endif meminfo.nr_banks = j; high_memory = __va(arm_lowmem_limit - 1) + 1; - memblock_set_current_limit(arm_lowmem_limit); + + /* + * Round the memblock limit down to a section size. This + * helps to ensure that we will allocate memory from the + * last full section, which should be mapped. + */ + if (memblock_limit) + memblock_limit = round_down(memblock_limit, SECTION_SIZE); + if (!memblock_limit) + memblock_limit = arm_lowmem_limit; + + memblock_set_current_limit(memblock_limit); } static inline void prepare_page_table(void) @@ -1160,7 +1195,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) /* * Allocate the vector page early. */ - vectors = early_alloc(PAGE_SIZE); + vectors = early_alloc(PAGE_SIZE * 2); early_trap_init(vectors); @@ -1205,15 +1240,27 @@ static void __init devicemaps_init(struct machine_desc *mdesc) map.pfn = __phys_to_pfn(virt_to_phys(vectors)); map.virtual = 0xffff0000; map.length = PAGE_SIZE; +#ifdef CONFIG_KUSER_HELPERS map.type = MT_HIGH_VECTORS; +#else + map.type = MT_LOW_VECTORS; +#endif create_mapping(&map); if (!vectors_high()) { map.virtual = 0; + map.length = PAGE_SIZE * 2; map.type = MT_LOW_VECTORS; create_mapping(&map); } + /* Now create a kernel read-only mapping */ + map.pfn += 1; + map.virtual = 0xffff0000 + PAGE_SIZE; + map.length = PAGE_SIZE; + map.type = MT_LOW_VECTORS; + create_mapping(&map); + /* * Ask the machine support to map in the statically mapped devices. */ @@ -1276,8 +1323,6 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; - memblock_set_current_limit(arm_lowmem_limit); - build_mem_type_table(); prepare_page_table(); map_lowmem(); diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 2bb61e703d6c..d1a2d05971e0 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -443,8 +443,6 @@ ENTRY(cpu_arm1020_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm1020_setup, #function __arm1020_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 8f96aa40f510..9d89405c3d03 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -425,8 +425,6 @@ ENTRY(cpu_arm1020e_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm1020e_setup, #function __arm1020e_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 8ebe4a469a22..6f01a0ae3b30 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -407,8 +407,6 @@ ENTRY(cpu_arm1022_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm1022_setup, #function __arm1022_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 093fc7e520c3..4799a24b43e6 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -396,9 +396,6 @@ ENTRY(cpu_arm1026_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - - __CPUINIT - .type __arm1026_setup, #function __arm1026_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 0ac908c7ade1..d42c37f9f5bc 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -116,8 +116,6 @@ ENTRY(cpu_arm720_reset) ENDPROC(cpu_arm720_reset) .popsection - __CPUINIT - .type __arm710_setup, #function __arm710_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index fde2d2a794cf..9b0ae90cbf17 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -60,8 +60,6 @@ ENTRY(cpu_arm740_reset) ENDPROC(cpu_arm740_reset) .popsection - __CPUINIT - .type __arm740_setup, #function __arm740_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 6ddea3e464bd..f6cc3f63ce39 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -51,8 +51,6 @@ ENTRY(cpu_arm7tdmi_reset) ENDPROC(cpu_arm7tdmi_reset) .popsection - __CPUINIT - .type __arm7tdmi_setup, #function __arm7tdmi_setup: mov pc, lr diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2556cf1c2da1..549557df6d57 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -410,8 +410,6 @@ ENTRY(cpu_arm920_do_resume) ENDPROC(cpu_arm920_do_resume) #endif - __CPUINIT - .type __arm920_setup, #function __arm920_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 4464c49d7449..2a758b06c6f6 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -388,8 +388,6 @@ ENTRY(cpu_arm922_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm922_setup, #function __arm922_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 281eb9b9c1d6..97448c3acf38 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -438,8 +438,6 @@ ENTRY(cpu_arm925_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm925_setup, #function __arm925_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 344c8a548cc0..0f098f407c9f 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -425,8 +425,6 @@ ENTRY(cpu_arm926_do_resume) ENDPROC(cpu_arm926_do_resume) #endif - __CPUINIT - .type __arm926_setup, #function __arm926_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 8da189d4a402..1c39a704ff6e 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -273,8 +273,6 @@ ENDPROC(arm940_dma_unmap_area) @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) define_cache_functions arm940 - __CPUINIT - .type __arm940_setup, #function __arm940_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index f666cf34075a..0289cd905e73 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -326,8 +326,6 @@ ENTRY(cpu_arm946_dcache_clean_area) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr - __CPUINIT - .type __arm946_setup, #function __arm946_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 8881391dfb9e..f51197ba754a 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -51,8 +51,6 @@ ENTRY(cpu_arm9tdmi_reset) ENDPROC(cpu_arm9tdmi_reset) .popsection - __CPUINIT - .type __arm9tdmi_setup, #function __arm9tdmi_setup: mov pc, lr diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index aaeb6c127c7a..2dfc0f1d3bfd 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -135,8 +135,6 @@ ENTRY(cpu_fa526_set_pte_ext) #endif mov pc, lr - __CPUINIT - .type __fa526_setup, #function __fa526_setup: /* On return of this routine, r0 must carry correct flags for CFG register */ diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 4106b09e0c29..d5146b98c8d1 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -514,8 +514,6 @@ ENTRY(cpu_feroceon_set_pte_ext) #endif mov pc, lr - __CPUINIT - .type __feroceon_setup, #function __feroceon_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 0b60dd3d742a..40acba595731 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -383,8 +383,6 @@ ENTRY(cpu_mohawk_do_resume) ENDPROC(cpu_mohawk_do_resume) #endif - __CPUINIT - .type __mohawk_setup, #function __mohawk_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 775d70fba937..c45319c8f1d9 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -159,8 +159,6 @@ ENTRY(cpu_sa110_set_pte_ext) #endif mov pc, lr - __CPUINIT - .type __sa110_setup, #function __sa110_setup: mov r10, #0 diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index d92dfd081429..09d241ae2dbe 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -198,8 +198,6 @@ ENTRY(cpu_sa1100_do_resume) ENDPROC(cpu_sa1100_do_resume) #endif - __CPUINIT - .type __sa1100_setup, #function __sa1100_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 2d1ef87328a1..1128064fddcb 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -180,8 +180,6 @@ ENDPROC(cpu_v6_do_resume) .align - __CPUINIT - /* * __v6_setup * diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 9704097c450e..bdd3be4be77a 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -110,7 +110,7 @@ ENTRY(cpu_v7_set_pte_ext) ARM( str r3, [r0, #2048]! ) THUMB( add r0, r0, #2048 ) THUMB( str r3, [r0] ) - ALT_SMP(mov pc,lr) + ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr @@ -160,8 +160,6 @@ ENDPROC(cpu_v7_set_pte_ext) mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1 .endm - __CPUINIT - /* AT * TFR EV X F I D LR S * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM @@ -172,5 +170,3 @@ ENDPROC(cpu_v7_set_pte_ext) .type v7_crval, #object v7_crval: crval clear=0x2120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c - - .previous diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 5ffe1956c6d9..01a719e18bb0 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -81,7 +81,7 @@ ENTRY(cpu_v7_set_pte_ext) tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] - ALT_SMP(mov pc, lr) + ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr @@ -140,8 +140,6 @@ ENDPROC(cpu_v7_set_pte_ext) mcrr p15, 0, \ttbr0, \zero, c2 @ load TTBR0 .endm - __CPUINIT - /* * AT * TFR EV X F IHD LR S @@ -153,5 +151,3 @@ ENDPROC(cpu_v7_set_pte_ext) .type v7_crval, #object v7_crval: crval clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c - - .previous diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7ef3ad05df39..73398bcf9bd8 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -75,13 +75,14 @@ ENTRY(cpu_v7_do_idle) ENDPROC(cpu_v7_do_idle) ENTRY(cpu_v7_dcache_clean_area) - ALT_SMP(mov pc, lr) @ MP extensions imply L1 PTW - ALT_UP(W(nop)) - dcache_line_size r2, r3 -1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + ALT_SMP(W(nop)) @ MP extensions imply L1 PTW + ALT_UP_B(1f) + mov pc, lr +1: dcache_line_size r2, r3 +2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, r2 subs r1, r1, r2 - bhi 1b + bhi 2b dsb mov pc, lr ENDPROC(cpu_v7_dcache_clean_area) @@ -167,8 +168,6 @@ ENDPROC(cpu_pj4b_do_idle) #endif - __CPUINIT - /* * __v7_setup * diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index e8efd83b6f25..dc1645890042 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -446,8 +446,6 @@ ENTRY(cpu_xsc3_do_resume) ENDPROC(cpu_xsc3_do_resume) #endif - __CPUINIT - .type __xsc3_setup, #function __xsc3_setup: mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index e766f889bfd6..d19b1cfcad91 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -558,8 +558,6 @@ ENTRY(cpu_xscale_do_resume) ENDPROC(cpu_xscale_do_resume) #endif - __CPUINIT - .type __xscale_setup, #function __xscale_setup: mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 3dc5cbea86cc..a5b5ff6e68d2 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -29,6 +29,13 @@ config PLAT_S5P help Base platform code for Samsung's S5P series SoC. +config SAMSUNG_PM + bool + depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM) + default y + help + Base platform power management code for samsung code + if PLAT_SAMSUNG # boot configurations diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 98d07d8fc7a7..199bbe304d02 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -51,7 +51,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support -obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_SAMSUNG_PM) += pm.o obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index a62753dc15ba..df45d6edc98d 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -83,6 +83,11 @@ extern struct clk clk_ext; extern struct clksrc_clk clk_epllref; extern struct clksrc_clk clk_esysclk; +/* S3C24XX UART clocks */ +extern struct clk s3c24xx_clk_uart0; +extern struct clk s3c24xx_clk_uart1; +extern struct clk s3c24xx_clk_uart2; + /* S3C64XX specific clocks */ extern struct clk clk_h2; extern struct clk clk_27m; diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 5d47ca35cabd..6bc1a8f471e3 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -19,7 +19,7 @@ struct device; -#ifdef CONFIG_PM +#ifdef CONFIG_SAMSUNG_PM extern __init int s3c_pm_init(void); extern __init int s3c64xx_pm_init(void); @@ -58,8 +58,6 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ /* from sleep.S */ -extern void s3c_cpu_resume(void); - extern int s3c2410_cpu_suspend(unsigned long); /* sleep save info */ @@ -106,12 +104,14 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count); extern void s3c_pm_do_restore(struct sleep_save *ptr, int count); extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); -#ifdef CONFIG_PM +#ifdef CONFIG_SAMSUNG_PM extern int s3c_irq_wake(struct irq_data *data, unsigned int state); extern int s3c_irqext_wake(struct irq_data *data, unsigned int state); +extern void s3c_cpu_resume(void); #else #define s3c_irq_wake NULL #define s3c_irqext_wake NULL +#define s3c_cpu_resume NULL #endif /* PM debug functions */ diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 3e5c4619caa5..50a3ea0037db 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -55,12 +55,13 @@ void __init s3c_init_cpu(unsigned long idcode, printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); - if (cpu->map_io == NULL || cpu->init == NULL) { + if (cpu->init == NULL) { printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); panic("Unsupported Samsung CPU"); } - cpu->map_io(); + if (cpu->map_io) + cpu->map_io(); } /* s3c24xx_init_clocks diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index ea3613642451..d0c23010b693 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -80,7 +80,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { @@ -101,11 +101,7 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) static void s3c_pm_save_uarts(void) { - struct pm_uart_save *save = uart_save; - unsigned int uart; - - for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) - s3c_pm_save_uart(uart, save); + s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save); } static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) @@ -126,11 +122,7 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) static void s3c_pm_restore_uarts(void) { - struct pm_uart_save *save = uart_save; - unsigned int uart; - - for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) - s3c_pm_restore_uart(uart, save); + s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save); } #else static void s3c_pm_save_uarts(void) { } diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 1e1b2d769748..39895d892c3b 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -23,7 +23,7 @@ * observers, irrespective of whether they're taking part in coherency * or not. This is necessary for the hotplug code to work reliably. */ -static void __cpuinit write_pen_release(int val) +static void write_pen_release(int val) { pen_release = val; smp_wmb(); @@ -33,7 +33,7 @@ static void __cpuinit write_pen_release(int val) static DEFINE_SPINLOCK(boot_lock); -void __cpuinit versatile_secondary_init(unsigned int cpu) +void versatile_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -48,7 +48,7 @@ void __cpuinit versatile_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -int __cpuinit versatile_boot_secondary(unsigned int cpu, struct task_struct *idle) +int versatile_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index f71c37edca26..8a6295c86209 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -170,9 +170,10 @@ static void __init xen_percpu_init(void *unused) per_cpu(xen_vcpu, cpu) = vcpup; enable_percpu_irq(xen_events_irq, 0); + put_cpu(); } -static void xen_restart(char str, const char *cmd) +static void xen_restart(enum reboot_mode reboot_mode, const char *cmd) { struct sched_shutdown r = { .reason = SHUTDOWN_reboot }; int rc; |