summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/include/plat
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap/include/plat')
-rw-r--r--arch/arm/plat-omap/include/plat/mux.h454
-rw-r--r--arch/arm/plat-omap/include/plat/omap-serial.h2
2 files changed, 0 insertions, 456 deletions
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
deleted file mode 100644
index 323948959200..000000000000
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ /dev/null
@@ -1,454 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: Please use the following naming style for new pin entries.
- * For example, W8_1610_MMC2_DAT0, where:
- * - W8 = ball
- * - 1610 = 1510 or 1610, none if common for both 1510 and 1610
- * - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
-
-#ifdef CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
- .mux_reg = FUNC_MUX_CTRL_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
- .pull_reg = PULL_DWN_CTRL_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
- .pu_pd_reg = PU_PD_SEL_##reg, \
- .pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
- .mux_reg = OMAP7XX_IO_CONF_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \
- .pull_reg = OMAP7XX_IO_CONF_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
- .pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) \
- .mux_reg = OMAP7XX_IO_CONF_##reg, \
- .mask_offset = mode_offset, \
- .mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \
- .pull_bit = bit, \
- .pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
- pull_reg, pull_bit, pull_status, \
- pu_pd_reg, pu_pd_status, debug_status) \
-{ \
- .name = desc, \
- .debug = debug_status, \
- MUX_REG(mux_reg, mode_offset, mode) \
- PULL_REG(pull_reg, pull_bit, pull_status) \
- PU_PD_REG(pu_pd_reg, pu_pd_status) \
-},
-
-
-/*
- * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
- * not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
- * as mux config
- */
-#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \
- pull_bit, pull_status, debug_status)\
-{ \
- .name = desc, \
- .debug = debug_status, \
- MUX_REG_7XX(mux_reg, mode_offset, mode) \
- PULL_REG_7XX(mux_reg, pull_bit, pull_status) \
- PU_PD_REG(NA, 0) \
-},
-
-struct pin_config {
- char *name;
- const unsigned int mux_reg;
- unsigned char debug;
-
- const unsigned char mask_offset;
- const unsigned char mask;
-
- const char *pull_name;
- const unsigned int pull_reg;
- const unsigned char pull_val;
- const unsigned char pull_bit;
-
- const char *pu_pd_name;
- const unsigned int pu_pd_reg;
- const unsigned char pu_pd_val;
-
-#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
- const char *mux_reg_name;
-#endif
-
-};
-
-enum omap7xx_index {
- /* OMAP 730 keyboard */
- E2_7XX_KBR0,
- J7_7XX_KBR1,
- E1_7XX_KBR2,
- F3_7XX_KBR3,
- D2_7XX_KBR4,
- C2_7XX_KBC0,
- D3_7XX_KBC1,
- E4_7XX_KBC2,
- F4_7XX_KBC3,
- E3_7XX_KBC4,
-
- /* USB */
- AA17_7XX_USB_DM,
- W16_7XX_USB_PU_EN,
- W17_7XX_USB_VBUSI,
- W18_7XX_USB_DMCK_OUT,
- W19_7XX_USB_DCRST,
-
- /* MMC */
- MMC_7XX_CMD,
- MMC_7XX_CLK,
- MMC_7XX_DAT0,
-
- /* I2C */
- I2C_7XX_SCL,
- I2C_7XX_SDA,
-
- /* SPI */
- SPI_7XX_1,
- SPI_7XX_2,
- SPI_7XX_3,
- SPI_7XX_4,
- SPI_7XX_5,
- SPI_7XX_6,
-
- /* UART */
- UART_7XX_1,
- UART_7XX_2,
-};
-
-enum omap1xxx_index {
- /* UART1 (BT_UART_GATING)*/
- UART1_TX = 0,
- UART1_RTS,
-
- /* UART2 (COM_UART_GATING)*/
- UART2_TX,
- UART2_RX,
- UART2_CTS,
- UART2_RTS,
-
- /* UART3 (GIGA_UART_GATING) */
- UART3_TX,
- UART3_RX,
- UART3_CTS,
- UART3_RTS,
- UART3_CLKREQ,
- UART3_BCLK, /* 12MHz clock out */
- Y15_1610_UART3_RTS,
-
- /* PWT & PWL */
- PWT,
- PWL,
-
- /* USB master generic */
- R18_USB_VBUS,
- R18_1510_USB_GPIO0,
- W4_USB_PUEN,
- W4_USB_CLKO,
- W4_USB_HIGHZ,
- W4_GPIO58,
-
- /* USB1 master */
- USB1_SUSP,
- USB1_SEO,
- W13_1610_USB1_SE0,
- USB1_TXEN,
- USB1_TXD,
- USB1_VP,
- USB1_VM,
- USB1_RCV,
- USB1_SPEED,
- R13_1610_USB1_SPEED,
- R13_1710_USB1_SE0,
-
- /* USB2 master */
- USB2_SUSP,
- USB2_VP,
- USB2_TXEN,
- USB2_VM,
- USB2_RCV,
- USB2_SEO,
- USB2_TXD,
-
- /* OMAP-1510 GPIO */
- R18_1510_GPIO0,
- R19_1510_GPIO1,
- M14_1510_GPIO2,
-
- /* OMAP1610 GPIO */
- P18_1610_GPIO3,
- Y15_1610_GPIO17,
-
- /* OMAP-1710 GPIO */
- R18_1710_GPIO0,
- V2_1710_GPIO10,
- N21_1710_GPIO14,
- W15_1710_GPIO40,
-
- /* MPUIO */
- MPUIO2,
- N15_1610_MPUIO2,
- MPUIO4,
- MPUIO5,
- T20_1610_MPUIO5,
- W11_1610_MPUIO6,
- V10_1610_MPUIO7,
- W11_1610_MPUIO9,
- V10_1610_MPUIO10,
- W10_1610_MPUIO11,
- E20_1610_MPUIO13,
- U20_1610_MPUIO14,
- E19_1610_MPUIO15,
-
- /* MCBSP2 */
- MCBSP2_CLKR,
- MCBSP2_CLKX,
- MCBSP2_DR,
- MCBSP2_DX,
- MCBSP2_FSR,
- MCBSP2_FSX,
-
- /* MCBSP3 */
- MCBSP3_CLKX,
-
- /* Misc ballouts */
- BALLOUT_V8_ARMIO3,
- N20_HDQ,
-
- /* OMAP-1610 MMC2 */
- W8_1610_MMC2_DAT0,
- V8_1610_MMC2_DAT1,
- W15_1610_MMC2_DAT2,
- R10_1610_MMC2_DAT3,
- Y10_1610_MMC2_CLK,
- Y8_1610_MMC2_CMD,
- V9_1610_MMC2_CMDDIR,
- V5_1610_MMC2_DATDIR0,
- W19_1610_MMC2_DATDIR1,
- R18_1610_MMC2_CLKIN,
-
- /* OMAP-1610 External Trace Interface */
- M19_1610_ETM_PSTAT0,
- L15_1610_ETM_PSTAT1,
- L18_1610_ETM_PSTAT2,
- L19_1610_ETM_D0,
- J19_1610_ETM_D6,
- J18_1610_ETM_D7,
-
- /* OMAP16XX GPIO */
- P20_1610_GPIO4,
- V9_1610_GPIO7,
- W8_1610_GPIO9,
- N20_1610_GPIO11,
- N19_1610_GPIO13,
- P10_1610_GPIO22,
- V5_1610_GPIO24,
- AA20_1610_GPIO_41,
- W19_1610_GPIO48,
- M7_1610_GPIO62,
- V14_16XX_GPIO37,
- R9_16XX_GPIO18,
- L14_16XX_GPIO49,
-
- /* OMAP-1610 uWire */
- V19_1610_UWIRE_SCLK,
- U18_1610_UWIRE_SDI,
- W21_1610_UWIRE_SDO,
- N14_1610_UWIRE_CS0,
- P15_1610_UWIRE_CS3,
- N15_1610_UWIRE_CS1,
-
- /* OMAP-1610 SPI */
- U19_1610_SPIF_SCK,
- U18_1610_SPIF_DIN,
- P20_1610_SPIF_DIN,
- W21_1610_SPIF_DOUT,
- R18_1610_SPIF_DOUT,
- N14_1610_SPIF_CS0,
- N15_1610_SPIF_CS1,
- T19_1610_SPIF_CS2,
- P15_1610_SPIF_CS3,
-
- /* OMAP-1610 Flash */
- L3_1610_FLASH_CS2B_OE,
- M8_1610_FLASH_CS2B_WE,
-
- /* First MMC */
- MMC_CMD,
- MMC_DAT1,
- MMC_DAT2,
- MMC_DAT0,
- MMC_CLK,
- MMC_DAT3,
-
- /* OMAP-1710 MMC CMDDIR and DATDIR0 */
- M15_1710_MMC_CLKI,
- P19_1710_MMC_CMDDIR,
- P20_1710_MMC_DATDIR0,
-
- /* OMAP-1610 USB0 alternate pin configuration */
- W9_USB0_TXEN,
- AA9_USB0_VP,
- Y5_USB0_RCV,
- R9_USB0_VM,
- V6_USB0_TXD,
- W5_USB0_SE0,
- V9_USB0_SPEED,
- V9_USB0_SUSP,
-
- /* USB2 */
- W9_USB2_TXEN,
- AA9_USB2_VP,
- Y5_USB2_RCV,
- R9_USB2_VM,
- V6_USB2_TXD,
- W5_USB2_SE0,
-
- /* 16XX UART */
- R13_1610_UART1_TX,
- V14_16XX_UART1_RX,
- R14_1610_UART1_CTS,
- AA15_1610_UART1_RTS,
- R9_16XX_UART2_RX,
- L14_16XX_UART3_RX,
-
- /* I2C OMAP-1610 */
- I2C_SCL,
- I2C_SDA,
-
- /* Keypad */
- F18_1610_KBC0,
- D20_1610_KBC1,
- D19_1610_KBC2,
- E18_1610_KBC3,
- C21_1610_KBC4,
- G18_1610_KBR0,
- F19_1610_KBR1,
- H14_1610_KBR2,
- E20_1610_KBR3,
- E19_1610_KBR4,
- N19_1610_KBR5,
-
- /* Power management */
- T20_1610_LOW_PWR,
-
- /* MCLK Settings */
- V5_1710_MCLK_ON,
- V5_1710_MCLK_OFF,
- R10_1610_MCLK_ON,
- R10_1610_MCLK_OFF,
-
- /* CompactFlash controller */
- P11_1610_CF_CD2,
- R11_1610_CF_IOIS16,
- V10_1610_CF_IREQ,
- W10_1610_CF_RESET,
- W11_1610_CF_CD1,
-
- /* parallel camera */
- J15_1610_CAM_LCLK,
- J18_1610_CAM_D7,
- J19_1610_CAM_D6,
- J14_1610_CAM_D5,
- K18_1610_CAM_D4,
- K19_1610_CAM_D3,
- K15_1610_CAM_D2,
- K14_1610_CAM_D1,
- L19_1610_CAM_D0,
- L18_1610_CAM_VS,
- L15_1610_CAM_HS,
- M19_1610_CAM_RSTZ,
- Y15_1610_CAM_OUTCLK,
-
- /* serial camera */
- H19_1610_CAM_EXCLK,
- Y12_1610_CCP_CLKP,
- W13_1610_CCP_CLKM,
- W14_1610_CCP_DATAP,
- Y14_1610_CCP_DATAM,
-
-};
-
-struct omap_mux_cfg {
- struct pin_config *pins;
- unsigned long size;
- int (*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-extern int omap2_mux_init(void);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index a531149823bb..b2eac60b6904 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -21,8 +21,6 @@
#include <linux/device.h>
#include <linux/pm_qos.h>
-#include <plat/mux.h>
-
#define DRIVER_NAME "omap_uart"
/*
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 15:11:47 +0000