diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 133 |
1 files changed, 55 insertions, 78 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf006d40342c..84449dd8f031 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1,9 +1,12 @@ config ARM bool default y + select ARCH_HAVE_CUSTOM_GPIO_H select HAVE_AOUT select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA + select HAVE_DMA_ATTRS + select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -11,6 +14,7 @@ config ARM select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB + select HAVE_ARCH_TRACEHOOK select HAVE_KPROBES if !XIP_KERNEL select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) @@ -30,10 +34,17 @@ config ARM select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_C_RECORDMCOUNT select HAVE_GENERIC_HARDIRQS + select HARDIRQS_SW_RESEND + select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW + select GENERIC_IRQ_PROBE + select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) select GENERIC_PCI_IOMAP - select HAVE_BPF_JIT if NET + select HAVE_BPF_JIT + select GENERIC_SMP_IDLE_THREAD + select KTIME_SCALAR + select GENERIC_CLOCKEVENTS_BROADCAST if SMP help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -45,33 +56,25 @@ config ARM config ARM_HAS_SG_CHAIN bool -config HAVE_PWM - bool - -config MIGHT_HAVE_PCI - bool - -config SYS_SUPPORTS_APM_EMULATION +config NEED_SG_DMA_LENGTH bool -config GENERIC_GPIO +config ARM_DMA_USE_IOMMU + select NEED_SG_DMA_LENGTH + select ARM_HAS_SG_CHAIN bool -config ARCH_USES_GETTIMEOFFSET +config HAVE_PWM bool - default n -config GENERIC_CLOCKEVENTS +config MIGHT_HAVE_PCI bool -config GENERIC_CLOCKEVENTS_BROADCAST +config SYS_SUPPORTS_APM_EMULATION bool - depends on GENERIC_CLOCKEVENTS - default y if SMP -config KTIME_SCALAR +config GENERIC_GPIO bool - default y config HAVE_TCM bool @@ -101,14 +104,6 @@ config EISA config SBUS bool -config MCA - bool - help - MicroChannel Architecture is found in some IBM PS/2 machines and - laptops. It is a bus system similar to PCI or ISA. See - <file:Documentation/mca.txt> (and especially the web page given - there) before attempting to build an MCA bus kernel. - config STACKTRACE_SUPPORT bool default y @@ -126,14 +121,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config HARDIRQS_SW_RESEND - bool - default y - -config GENERIC_IRQ_PROBE - bool - default y - config GENERIC_LOCKBREAK bool default y @@ -159,9 +146,6 @@ config ARCH_HAS_CPUFREQ and that the relevant menu configurations are displayed for it. -config ARCH_HAS_CPU_IDLE_WAIT - def_bool y - config GENERIC_HWEIGHT bool default y @@ -280,6 +264,7 @@ config ARCH_INTEGRATOR select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select SPARSE_IRQ + select MULTI_IRQ_HANDLER help Support for ARM's Integrator platform. @@ -340,8 +325,8 @@ config ARCH_AT91 select IRQ_DOMAIN select NEED_MACH_IO_H if PCCARD help - This enables support for systems based on the Atmel AT91RM9200, - AT91SAM9 processors. + This enables support for systems based on Atmel + AT91RM9200 and AT91SAM9* processors. config ARCH_BCMRING bool "Broadcom BCMRING" @@ -373,12 +358,12 @@ config ARCH_HIGHBANK Support for the Calxeda Highbank SoC based boards. config ARCH_CLPS711X - bool "Cirrus Logic CLPS711x/EP721x-based" + bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select CPU_ARM720T select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H help - Support for Cirrus Logic 711x/721x based boards. + Support for Cirrus Logic 711x/721x/731x based boards. config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" @@ -407,6 +392,8 @@ config ARCH_PRIMA2 select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL + select PINCTRL_SIRF select USE_OF select ZONE_DMA help @@ -468,7 +455,10 @@ config ARCH_MXS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select COMMON_CLK select HAVE_CLK_PREPARE + select PINCTRL + select USE_OF help Support for Freescale MXS-based family of processors @@ -528,35 +518,13 @@ config ARCH_IOP33X help Support for Intel's IOP33X (XScale) family of processors. -config ARCH_IXP23XX - bool "IXP23XX-based" - depends on MMU - select CPU_XSC3 - select PCI - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - help - Support for Intel's IXP23xx (XScale) family of processors. - -config ARCH_IXP2000 - bool "IXP2400/2800-based" - depends on MMU - select CPU_XSCALE - select PCI - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - help - Support for Intel's IXP2400/2800 (XScale) family of processors. - config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK select CLKSRC_MMIO select CPU_XSCALE - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select NEED_MACH_IO_H @@ -597,6 +565,7 @@ config ARCH_LPC32XX select USB_ARCH_HAS_OHCI select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select USE_OF help Support for the NXP LPC32XX family of processors @@ -632,7 +601,7 @@ config ARCH_MMP select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select GPIO_PXA - select TICK_ONESHOT + select IRQ_DOMAIN select PLAT_PXA select SPARSE_IRQ select GENERIC_ALLOCATOR @@ -716,7 +685,6 @@ config ARCH_PXA select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select GPIO_PXA - select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ select AUTO_ZRELADDR @@ -783,7 +751,6 @@ config ARCH_SA1100 select CPU_FREQ select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP - select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB select HAVE_IDE select NEED_MACH_MEMORY_H @@ -946,6 +913,7 @@ config ARCH_NOMADIK select CPU_ARM926T select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select PINCTRL select MIGHT_HAVE_CACHE_L2X0 select ARCH_REQUIRE_GPIOLIB help @@ -980,6 +948,7 @@ config PLAT_SPEAR select ARM_AMBA select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select COMMON_CLK select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK @@ -1046,10 +1015,6 @@ source "arch/arm/mach-iop13xx/Kconfig" source "arch/arm/mach-ixp4xx/Kconfig" -source "arch/arm/mach-ixp2000/Kconfig" - -source "arch/arm/mach-ixp23xx/Kconfig" - source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" @@ -1088,7 +1053,6 @@ source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" -source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-spear/Kconfig" @@ -1139,6 +1103,7 @@ config PLAT_ORION bool select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select COMMON_CLK config PLAT_PXA bool @@ -1186,6 +1151,15 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_326103 + bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" + depends on CPU_V6 + help + Executing a SWP instruction to read-only memory does not set bit 11 + of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to + treat the access as a read, preventing a COW from occurring and + causing the faulting task to livelock. + config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" depends on CPU_V6 || CPU_V6K @@ -1464,8 +1438,6 @@ endmenu menu "Kernel Features" -source "kernel/time/Kconfig" - config HAVE_SMP bool help @@ -1543,10 +1515,15 @@ config HAVE_ARM_SCU help This option enables support for the ARM system coherency unit +config ARM_ARCH_TIMER + bool "Architected timer support" + depends on CPU_V7 + help + This option enables support for the ARM architected timer + config HAVE_ARM_TWD bool depends on SMP - select TICK_ONESHOT help This options enables support for the ARM timer and watchdog unit @@ -1927,10 +1904,10 @@ choice default ZBOOT_ROM_NONE help Include experimental SD/MMC loading code in the ROM-able zImage. - With this enabled it is possible to write the the ROM-able zImage + With this enabled it is possible to write the ROM-able zImage kernel image to an MMC or SD card and boot the kernel straight from the reset vector. At reset the processor Mask ROM will load - the first part of the the ROM-able zImage which in turn loads the + the first part of the ROM-able zImage which in turn loads the rest the kernel image to RAM. config ZBOOT_ROM_NONE @@ -2272,9 +2249,9 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5PC100 + depends on !ARCH_S5PC100 && !ARCH_TEGRA depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ - CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE + CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK def_bool y config ARM_CPU_SUSPEND |