diff options
Diffstat (limited to 'Documentation/filesystems/spufs')
| -rw-r--r-- | Documentation/filesystems/spufs/index.rst | 13 | ||||
| -rw-r--r-- | Documentation/filesystems/spufs/spu_create.rst | 131 | ||||
| -rw-r--r-- | Documentation/filesystems/spufs/spu_run.rst | 138 | ||||
| -rw-r--r-- | Documentation/filesystems/spufs/spufs.rst | 273 |
4 files changed, 555 insertions, 0 deletions
diff --git a/Documentation/filesystems/spufs/index.rst b/Documentation/filesystems/spufs/index.rst new file mode 100644 index 000000000000..5ed4a8494967 --- /dev/null +++ b/Documentation/filesystems/spufs/index.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +SPU Filesystem +============== + + +.. toctree:: + :maxdepth: 1 + + spufs + spu_create + spu_run diff --git a/Documentation/filesystems/spufs/spu_create.rst b/Documentation/filesystems/spufs/spu_create.rst new file mode 100644 index 000000000000..83108c099696 --- /dev/null +++ b/Documentation/filesystems/spufs/spu_create.rst @@ -0,0 +1,131 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========== +spu_create +========== + +Name +==== + spu_create - create a new spu context + + +Synopsis +======== + + :: + + #include <sys/types.h> + #include <sys/spu.h> + + int spu_create(const char *pathname, int flags, mode_t mode); + +Description +=========== + The spu_create system call is used on PowerPC machines that implement + the Cell Broadband Engine Architecture in order to access Synergistic + Processor Units (SPUs). It creates a new logical context for an SPU in + pathname and returns a handle to associated with it. pathname must + point to a non-existing directory in the mount point of the SPU file + system (spufs). When spu_create is successful, a directory gets cre- + ated on pathname and it is populated with files. + + The returned file handle can only be passed to spu_run(2) or closed, + other operations are not defined on it. When it is closed, all associ- + ated directory entries in spufs are removed. When the last file handle + pointing either inside of the context directory or to this file + descriptor is closed, the logical SPU context is destroyed. + + The parameter flags can be zero or any bitwise or'd combination of the + following constants: + + SPU_RAWIO + Allow mapping of some of the hardware registers of the SPU into + user space. This flag requires the CAP_SYS_RAWIO capability, see + capabilities(7). + + The mode parameter specifies the permissions used for creating the new + directory in spufs. mode is modified with the user's umask(2) value + and then used for both the directory and the files contained in it. The + file permissions mask out some more bits of mode because they typically + support only read or write access. See stat(2) for a full list of the + possible mode values. + + +Return Value +============ + spu_create returns a new file descriptor. It may return -1 to indicate + an error condition and set errno to one of the error codes listed + below. + + +Errors +====== + EACCES + The current user does not have write access on the spufs mount + point. + + EEXIST An SPU context already exists at the given path name. + + EFAULT pathname is not a valid string pointer in the current address + space. + + EINVAL pathname is not a directory in the spufs mount point. + + ELOOP Too many symlinks were found while resolving pathname. + + EMFILE The process has reached its maximum open file limit. + + ENAMETOOLONG + pathname was too long. + + ENFILE The system has reached the global open file limit. + + ENOENT Part of pathname could not be resolved. + + ENOMEM The kernel could not allocate all resources required. + + ENOSPC There are not enough SPU resources available to create a new + context or the user specific limit for the number of SPU con- + texts has been reached. + + ENOSYS the functionality is not provided by the current system, because + either the hardware does not provide SPUs or the spufs module is + not loaded. + + ENOTDIR + A part of pathname is not a directory. + + + +Notes +===== + spu_create is meant to be used from libraries that implement a more + abstract interface to SPUs, not to be used from regular applications. + See http://www.bsc.es/projects/deepcomputing/linuxoncell/ for the rec- + ommended libraries. + + +Files +===== + pathname must point to a location beneath the mount point of spufs. By + convention, it gets mounted in /spu. + + +Conforming to +============= + This call is Linux specific and only implemented by the ppc64 architec- + ture. Programs using this system call are not portable. + + +Bugs +==== + The code does not yet fully implement all features lined out here. + + +Author +====== + Arnd Bergmann <arndb@de.ibm.com> + +See Also +======== + capabilities(7), close(2), spu_run(2), spufs(7) diff --git a/Documentation/filesystems/spufs/spu_run.rst b/Documentation/filesystems/spufs/spu_run.rst new file mode 100644 index 000000000000..7fdb1c31cb91 --- /dev/null +++ b/Documentation/filesystems/spufs/spu_run.rst @@ -0,0 +1,138 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======= +spu_run +======= + + +Name +==== + spu_run - execute an spu context + + +Synopsis +======== + + :: + + #include <sys/spu.h> + + int spu_run(int fd, unsigned int *npc, unsigned int *event); + +Description +=========== + The spu_run system call is used on PowerPC machines that implement the + Cell Broadband Engine Architecture in order to access Synergistic Pro- + cessor Units (SPUs). It uses the fd that was returned from spu_cre- + ate(2) to address a specific SPU context. When the context gets sched- + uled to a physical SPU, it starts execution at the instruction pointer + passed in npc. + + Execution of SPU code happens synchronously, meaning that spu_run does + not return while the SPU is still running. If there is a need to exe- + cute SPU code in parallel with other code on either the main CPU or + other SPUs, you need to create a new thread of execution first, e.g. + using the pthread_create(3) call. + + When spu_run returns, the current value of the SPU instruction pointer + is written back to npc, so you can call spu_run again without updating + the pointers. + + event can be a NULL pointer or point to an extended status code that + gets filled when spu_run returns. It can be one of the following con- + stants: + + SPE_EVENT_DMA_ALIGNMENT + A DMA alignment error + + SPE_EVENT_SPE_DATA_SEGMENT + A DMA segmentation error + + SPE_EVENT_SPE_DATA_STORAGE + A DMA storage error + + If NULL is passed as the event argument, these errors will result in a + signal delivered to the calling process. + +Return Value +============ + spu_run returns the value of the spu_status register or -1 to indicate + an error and set errno to one of the error codes listed below. The + spu_status register value contains a bit mask of status codes and + optionally a 14 bit code returned from the stop-and-signal instruction + on the SPU. The bit masks for the status codes are: + + 0x02 + SPU was stopped by stop-and-signal. + + 0x04 + SPU was stopped by halt. + + 0x08 + SPU is waiting for a channel. + + 0x10 + SPU is in single-step mode. + + 0x20 + SPU has tried to execute an invalid instruction. + + 0x40 + SPU has tried to access an invalid channel. + + 0x3fff0000 + The bits masked with this value contain the code returned from + stop-and-signal. + + There are always one or more of the lower eight bits set or an error + code is returned from spu_run. + +Errors +====== + EAGAIN or EWOULDBLOCK + fd is in non-blocking mode and spu_run would block. + + EBADF fd is not a valid file descriptor. + + EFAULT npc is not a valid pointer or status is neither NULL nor a valid + pointer. + + EINTR A signal occurred while spu_run was in progress. The npc value + has been updated to the new program counter value if necessary. + + EINVAL fd is not a file descriptor returned from spu_create(2). + + ENOMEM Insufficient memory was available to handle a page fault result- + ing from an MFC direct memory access. + + ENOSYS the functionality is not provided by the current system, because + either the hardware does not provide SPUs or the spufs module is + not loaded. + + +Notes +===== + spu_run is meant to be used from libraries that implement a more + abstract interface to SPUs, not to be used from regular applications. + See http://www.bsc.es/projects/deepcomputing/linuxoncell/ for the rec- + ommended libraries. + + +Conforming to +============= + This call is Linux specific and only implemented by the ppc64 architec- + ture. Programs using this system call are not portable. + + +Bugs +==== + The code does not yet fully implement all features lined out here. + + +Author +====== + Arnd Bergmann <arndb@de.ibm.com> + +See Also +======== + capabilities(7), close(2), spu_create(2), spufs(7) diff --git a/Documentation/filesystems/spufs/spufs.rst b/Documentation/filesystems/spufs/spufs.rst new file mode 100644 index 000000000000..8a42859bb100 --- /dev/null +++ b/Documentation/filesystems/spufs/spufs.rst @@ -0,0 +1,273 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===== +spufs +===== + +Name +==== + + spufs - the SPU file system + + +Description +=========== + + The SPU file system is used on PowerPC machines that implement the Cell + Broadband Engine Architecture in order to access Synergistic Processor + Units (SPUs). + + The file system provides a name space similar to posix shared memory or + message queues. Users that have write permissions on the file system + can use spu_create(2) to establish SPU contexts in the spufs root. + + Every SPU context is represented by a directory containing a predefined + set of files. These files can be used for manipulating the state of the + logical SPU. Users can change permissions on those files, but not actu- + ally add or remove files. + + +Mount Options +============= + + uid=<uid> + set the user owning the mount point, the default is 0 (root). + + gid=<gid> + set the group owning the mount point, the default is 0 (root). + + +Files +===== + + The files in spufs mostly follow the standard behavior for regular sys- + tem calls like read(2) or write(2), but often support only a subset of + the operations supported on regular file systems. This list details the + supported operations and the deviations from the behaviour in the + respective man pages. + + All files that support the read(2) operation also support readv(2) and + all files that support the write(2) operation also support writev(2). + All files support the access(2) and stat(2) family of operations, but + only the st_mode, st_nlink, st_uid and st_gid fields of struct stat + contain reliable information. + + All files support the chmod(2)/fchmod(2) and chown(2)/fchown(2) opera- + tions, but will not be able to grant permissions that contradict the + possible operations, e.g. read access on the wbox file. + + The current set of files is: + + + /mem + the contents of the local storage memory of the SPU. This can be + accessed like a regular shared memory file and contains both code and + data in the address space of the SPU. The possible operations on an + open mem file are: + + read(2), pread(2), write(2), pwrite(2), lseek(2) + These operate as documented, with the exception that seek(2), + write(2) and pwrite(2) are not supported beyond the end of the + file. The file size is the size of the local storage of the SPU, + which normally is 256 kilobytes. + + mmap(2) + Mapping mem into the process address space gives access to the + SPU local storage within the process address space. Only + MAP_SHARED mappings are allowed. + + + /mbox + The first SPU to CPU communication mailbox. This file is read-only and + can be read in units of 32 bits. The file can only be used in non- + blocking mode and it even poll() will not block on it. The possible + operations on an open mbox file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. If there is no data available in the mail + box, the return value is set to -1 and errno becomes EAGAIN. + When data has been read successfully, four bytes are placed in + the data buffer and the value four is returned. + + + /ibox + The second SPU to CPU communication mailbox. This file is similar to + the first mailbox file, but can be read in blocking I/O mode, and the + poll family of system calls can be used to wait for it. The possible + operations on an open ibox file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. If there is no data available in the mail + box and the file descriptor has been opened with O_NONBLOCK, the + return value is set to -1 and errno becomes EAGAIN. + + If there is no data available in the mail box and the file + descriptor has been opened without O_NONBLOCK, the call will + block until the SPU writes to its interrupt mailbox channel. + When data has been read successfully, four bytes are placed in + the data buffer and the value four is returned. + + poll(2) + Poll on the ibox file returns (POLLIN | POLLRDNORM) whenever + data is available for reading. + + + /wbox + The CPU to SPU communation mailbox. It is write-only and can be written + in units of 32 bits. If the mailbox is full, write() will block and + poll can be used to wait for it becoming empty again. The possible + operations on an open wbox file are: write(2) If a count smaller than + four is requested, write returns -1 and sets errno to EINVAL. If there + is no space available in the mail box and the file descriptor has been + opened with O_NONBLOCK, the return value is set to -1 and errno becomes + EAGAIN. + + If there is no space available in the mail box and the file descriptor + has been opened without O_NONBLOCK, the call will block until the SPU + reads from its PPE mailbox channel. When data has been read success- + fully, four bytes are placed in the data buffer and the value four is + returned. + + poll(2) + Poll on the ibox file returns (POLLOUT | POLLWRNORM) whenever + space is available for writing. + + + /mbox_stat, /ibox_stat, /wbox_stat + Read-only files that contain the length of the current queue, i.e. how + many words can be read from mbox or ibox or how many words can be + written to wbox without blocking. The files can be read only in 4-byte + units and return a big-endian binary integer number. The possible + operations on an open ``*box_stat`` file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is placed in + the data buffer, containing the number of elements that can be + read from (for mbox_stat and ibox_stat) or written to (for + wbox_stat) the respective mail box without blocking or resulting + in EAGAIN. + + + /npc, /decr, /decr_status, /spu_tag_mask, /event_mask, /srr0 + Internal registers of the SPU. The representation is an ASCII string + with the numeric value of the next instruction to be executed. These + can be used in read/write mode for debugging, but normal operation of + programs should not rely on them because access to any of them except + npc requires an SPU context save and is therefore very inefficient. + + The contents of these files are: + + =================== =================================== + npc Next Program Counter + decr SPU Decrementer + decr_status Decrementer Status + spu_tag_mask MFC tag mask for SPU DMA + event_mask Event mask for SPU interrupts + srr0 Interrupt Return address register + =================== =================================== + + + The possible operations on an open npc, decr, decr_status, + spu_tag_mask, event_mask or srr0 file are: + + read(2) + When the count supplied to the read call is shorter than the + required length for the pointer value plus a newline character, + subsequent reads from the same file descriptor will result in + completing the string, regardless of changes to the register by + a running SPU task. When a complete string has been read, all + subsequent read operations will return zero bytes and a new file + descriptor needs to be opened to read the value again. + + write(2) + A write operation on the file results in setting the register to + the value given in the string. The string is parsed from the + beginning to the first non-numeric character or the end of the + buffer. Subsequent writes to the same file descriptor overwrite + the previous setting. + + + /fpcr + This file gives access to the Floating Point Status and Control Regis- + ter as a four byte long file. The operations on the fpcr file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is placed in + the data buffer, containing the current value of the fpcr regis- + ter. + + write(2) + If a count smaller than four is requested, write returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is copied + from the data buffer, updating the value of the fpcr register. + + + /signal1, /signal2 + The two signal notification channels of an SPU. These are read-write + files that operate on a 32 bit word. Writing to one of these files + triggers an interrupt on the SPU. The value written to the signal + files can be read from the SPU through a channel read or from host user + space through the file. After the value has been read by the SPU, it + is reset to zero. The possible operations on an open signal1 or sig- + nal2 file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is placed in + the data buffer, containing the current value of the specified + signal notification register. + + write(2) + If a count smaller than four is requested, write returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is copied + from the data buffer, updating the value of the specified signal + notification register. The signal notification register will + either be replaced with the input data or will be updated to the + bitwise OR or the old value and the input data, depending on the + contents of the signal1_type, or signal2_type respectively, + file. + + + /signal1_type, /signal2_type + These two files change the behavior of the signal1 and signal2 notifi- + cation files. The contain a numerical ASCII string which is read as + either "1" or "0". In mode 0 (overwrite), the hardware replaces the + contents of the signal channel with the data that is written to it. in + mode 1 (logical OR), the hardware accumulates the bits that are subse- + quently written to it. The possible operations on an open signal1_type + or signal2_type file are: + + read(2) + When the count supplied to the read call is shorter than the + required length for the digit plus a newline character, subse- + quent reads from the same file descriptor will result in com- + pleting the string. When a complete string has been read, all + subsequent read operations will return zero bytes and a new file + descriptor needs to be opened to read the value again. + + write(2) + A write operation on the file results in setting the register to + the value given in the string. The string is parsed from the + beginning to the first non-numeric character or the end of the + buffer. Subsequent writes to the same file descriptor overwrite + the previous setting. + + +Examples +======== + /etc/fstab entry + none /spu spufs gid=spu 0 0 + + +Authors +======= + Arnd Bergmann <arndb@de.ibm.com>, Mark Nutter <mnutter@us.ibm.com>, + Ulrich Weigand <Ulrich.Weigand@de.ibm.com> + +See Also +======== + capabilities(7), close(2), spu_create(2), spu_run(2), spufs(7) |