1 files changed, 70 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
new file mode 100644
index 000000000000..a21dc1a8890f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-charger
+
+  maxim,constant-microvolt:
+    description: |
+      Battery constant voltage in uV. The charger will operate in fast
+      charge constant current mode till battery voltage reaches this level.
+      Then the charger will switch to fast charge constant voltage mode.
+      Also vsys (system voltage) will be set to this value when DC power is
+      supplied but charger is not enabled.
+      Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+    minimum: 3650000
+    maximum: 4400000
+    default: 4200000
+
+  maxim,min-system-microvolt:
+    description: |
+      Minimal system voltage in uV.
+    enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
+           3600000, 3700000]
+    default: 3600000
+
+  maxim,thermal-regulation-celsius:
+    description: |
+      Temperature in Celsius for entering high temperature charging mode.
+      If die temperature exceeds this value the charging current will be
+      reduced by 105 mA/Celsius.
+    enum: [70, 85, 100, 115]
+    default: 100
+
+  maxim,battery-overcurrent-microamp:
+    description: |
+      Overcurrent protection threshold in uA (current from battery to
+      system).
+      Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+    minimum: 2000000
+    maximum: 3500000
+    default: 3500000
+
+  maxim,charge-input-threshold-microvolt:
+    description: |
+      Threshold voltage in uV for triggering input voltage regulation loop.
+      If input voltage decreases below this value, the input current will
+      be reduced to reach the threshold voltage.
+    enum: [4300000, 4700000, 4800000, 4900000]
+    default: 4300000
+
+required:
+  - compatible
+
+additionalProperties: false