diff options
25 files changed, 628 insertions, 125 deletions
diff --git a/Documentation/virt/kvm/index.rst b/Documentation/virt/kvm/index.rst index dcc252634cf9..b6833c7bb474 100644 --- a/Documentation/virt/kvm/index.rst +++ b/Documentation/virt/kvm/index.rst @@ -28,3 +28,5 @@ KVM arm/index devices/index + + running-nested-guests diff --git a/Documentation/virt/kvm/running-nested-guests.rst b/Documentation/virt/kvm/running-nested-guests.rst new file mode 100644 index 000000000000..d0a1fc754c84 --- /dev/null +++ b/Documentation/virt/kvm/running-nested-guests.rst @@ -0,0 +1,276 @@ +============================== +Running nested guests with KVM +============================== + +A nested guest is the ability to run a guest inside another guest (it +can be KVM-based or a different hypervisor). The straightforward +example is a KVM guest that in turn runs on a KVM guest (the rest of +this document is built on this example):: + + .----------------. .----------------. + | | | | + | L2 | | L2 | + | (Nested Guest) | | (Nested Guest) | + | | | | + |----------------'--'----------------| + | | + | L1 (Guest Hypervisor) | + | KVM (/dev/kvm) | + | | + .------------------------------------------------------. + | L0 (Host Hypervisor) | + | KVM (/dev/kvm) | + |------------------------------------------------------| + | Hardware (with virtualization extensions) | + '------------------------------------------------------' + +Terminology: + +- L0 – level-0; the bare metal host, running KVM + +- L1 – level-1 guest; a VM running on L0; also called the "guest + hypervisor", as it itself is capable of running KVM. + +- L2 – level-2 guest; a VM running on L1, this is the "nested guest" + +.. note:: The above diagram is modelled after the x86 architecture; + s390x, ppc64 and other architectures are likely to have + a different design for nesting. + + For example, s390x always has an LPAR (LogicalPARtition) + hypervisor running on bare metal, adding another layer and + resulting in at least four levels in a nested setup — L0 (bare + metal, running the LPAR hypervisor), L1 (host hypervisor), L2 + (guest hypervisor), L3 (nested guest). + + This document will stick with the three-level terminology (L0, + L1, and L2) for all architectures; and will largely focus on + x86. + + +Use Cases +--------- + +There are several scenarios where nested KVM can be useful, to name a +few: + +- As a developer, you want to test your software on different operating + systems (OSes). Instead of renting multiple VMs from a Cloud + Provider, using nested KVM lets you rent a large enough "guest + hypervisor" (level-1 guest). This in turn allows you to create + multiple nested guests (level-2 guests), running different OSes, on + which you can develop and test your software. + +- Live migration of "guest hypervisors" and their nested guests, for + load balancing, disaster recovery, etc. + +- VM image creation tools (e.g. ``virt-install``, etc) often run + their own VM, and users expect these to work inside a VM. + +- Some OSes use virtualization internally for security (e.g. to let + applications run safely in isolation). + + +Enabling "nested" (x86) +----------------------- + +From Linux kernel v4.19 onwards, the ``nested`` KVM parameter is enabled +by default for Intel and AMD. (Though your Linux distribution might +override this default.) + +In case you are running a Linux kernel older than v4.19, to enable +nesting, set the ``nested`` KVM module parameter to ``Y`` or ``1``. To +persist this setting across reboots, you can add it in a config file, as +shown below: + +1. On the bare metal host (L0), list the kernel modules and ensure that + the KVM modules:: + + $ lsmod | grep -i kvm + kvm_intel 133627 0 + kvm 435079 1 kvm_intel + +2. Show information for ``kvm_intel`` module:: + + $ modinfo kvm_intel | grep -i nested + parm: nested:bool + +3. For the nested KVM configuration to persist across reboots, place the + below in ``/etc/modprobed/kvm_intel.conf`` (create the file if it + doesn't exist):: + + $ cat /etc/modprobe.d/kvm_intel.conf + options kvm-intel nested=y + +4. Unload and re-load the KVM Intel module:: + + $ sudo rmmod kvm-intel + $ sudo modprobe kvm-intel + +5. Verify if the ``nested`` parameter for KVM is enabled:: + + $ cat /sys/module/kvm_intel/parameters/nested + Y + +For AMD hosts, the process is the same as above, except that the module +name is ``kvm-amd``. + + +Additional nested-related kernel parameters (x86) +------------------------------------------------- + +If your hardware is sufficiently advanced (Intel Haswell processor or +higher, which has newer hardware virt extensions), the following +additional features will also be enabled by default: "Shadow VMCS +(Virtual Machine Control Structure)", APIC Virtualization on your bare +metal host (L0). Parameters for Intel hosts:: + + $ cat /sys/module/kvm_intel/parameters/enable_shadow_vmcs + Y + + $ cat /sys/module/kvm_intel/parameters/enable_apicv + Y + + $ cat /sys/module/kvm_intel/parameters/ept + Y + +.. note:: If you suspect your L2 (i.e. nested guest) is running slower, + ensure the above are enabled (particularly + ``enable_shadow_vmcs`` and ``ept``). + + +Starting a nested guest (x86) +----------------------------- + +Once your bare metal host (L0) is configured for nesting, you should be +able to start an L1 guest with:: + + $ qemu-kvm -cpu host [...] + +The above will pass through the host CPU's capabilities as-is to the +gues); or for better live migration compatibility, use a named CPU +model supported by QEMU. e.g.:: + + $ qemu-kvm -cpu Haswell-noTSX-IBRS,vmx=on + +then the guest hypervisor will subsequently be capable of running a +nested guest with accelerated KVM. + + +Enabling "nested" (s390x) +------------------------- + +1. On the host hypervisor (L0), enable the ``nested`` parameter on + s390x:: + + $ rmmod kvm + $ modprobe kvm nested=1 + +.. note:: On s390x, the kernel parameter ``hpage`` is mutually exclusive + with the ``nested`` paramter — i.e. to be able to enable + ``nested``, the ``hpage`` parameter *must* be disabled. + +2. The guest hypervisor (L1) must be provided with the ``sie`` CPU + feature — with QEMU, this can be done by using "host passthrough" + (via the command-line ``-cpu host``). + +3. Now the KVM module can be loaded in the L1 (guest hypervisor):: + + $ modprobe kvm + + +Live migration with nested KVM +------------------------------ + +Migrating an L1 guest, with a *live* nested guest in it, to another +bare metal host, works as of Linux kernel 5.3 and QEMU 4.2.0 for +Intel x86 systems, and even on older versions for s390x. + +On AMD systems, once an L1 guest has started an L2 guest, the L1 guest +should no longer be migrated or saved (refer to QEMU documentation on +"savevm"/"loadvm") until the L2 guest shuts down. Attempting to migrate +or save-and-load an L1 guest while an L2 guest is running will result in +undefined behavior. You might see a ``kernel BUG!`` entry in ``dmesg``, a +kernel 'oops', or an outright kernel panic. Such a migrated or loaded L1 +guest can no longer be considered stable or secure, and must be restarted. +Migrating an L1 guest merely configured to support nesting, while not +actually running L2 guests, is expected to function normally even on AMD +systems but may fail once guests are started. + +Migrating an L2 guest is always expected to succeed, so all the following +scenarios should work even on AMD systems: + +- Migrating a nested guest (L2) to another L1 guest on the *same* bare + metal host. + +- Migrating a nested guest (L2) to another L1 guest on a *different* + bare metal host. + +- Migrating a nested guest (L2) to a bare metal host. + +Reporting bugs from nested setups +----------------------------------- + +Debugging "nested" problems can involve sifting through log files across +L0, L1 and L2; this can result in tedious back-n-forth between the bug +reporter and the bug fixer. + +- Mention that you are in a "nested" setup. If you are running any kind + of "nesting" at all, say so. Unfortunately, this needs to be called + out because when reporting bugs, people tend to forget to even + *mention* that they're using nested virtualization. + +- Ensure you are actually running KVM on KVM. Sometimes people do not + have KVM enabled for their guest hypervisor (L1), which results in + them running with pure emulation or what QEMU calls it as "TCG", but + they think they're running nested KVM. Thus confusing "nested Virt" + (which could also mean, QEMU on KVM) with "nested KVM" (KVM on KVM). + +Information to collect (generic) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The following is not an exhaustive list, but a very good starting point: + + - Kernel, libvirt, and QEMU version from L0 + + - Kernel, libvirt and QEMU version from L1 + + - QEMU command-line of L1 -- when using libvirt, you'll find it here: + ``/var/log/libvirt/qemu/instance.log`` + + - QEMU command-line of L2 -- as above, when using libvirt, get the + complete libvirt-generated QEMU command-line + + - ``cat /sys/cpuinfo`` from L0 + + - ``cat /sys/cpuinfo`` from L1 + + - ``lscpu`` from L0 + + - ``lscpu`` from L1 + + - Full ``dmesg`` output from L0 + + - Full ``dmesg`` output from L1 + +x86-specific info to collect +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Both the below commands, ``x86info`` and ``dmidecode``, should be +available on most Linux distributions with the same name: + + - Output of: ``x86info -a`` from L0 + + - Output of: ``x86info -a`` from L1 + + - Output of: ``dmidecode`` from L0 + + - Output of: ``dmidecode`` from L1 + +s390x-specific info to collect +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Along with the earlier mentioned generic details, the below is +also recommended: + + - ``/proc/sysinfo`` from L1; this will also include the info from L0 diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index 23ebe51410f0..50a279d3ddd7 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -200,6 +200,13 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) } memcpy((u32 *)regs + off, valp, KVM_REG_SIZE(reg->id)); + + if (*vcpu_cpsr(vcpu) & PSR_MODE32_BIT) { + int i; + + for (i = 0; i < 16; i++) + *vcpu_reg32(vcpu, i) = (u32)*vcpu_reg32(vcpu, i); + } out: return err; } diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S index d22d0534dd60..90186cf6473e 100644 --- a/arch/arm64/kvm/hyp/entry.S +++ b/arch/arm64/kvm/hyp/entry.S @@ -18,6 +18,7 @@ #define CPU_GP_REG_OFFSET(x) (CPU_GP_REGS + x) #define CPU_XREG_OFFSET(x) CPU_GP_REG_OFFSET(CPU_USER_PT_REGS + 8*x) +#define CPU_SP_EL0_OFFSET (CPU_XREG_OFFSET(30) + 8) .text .pushsection .hyp.text, "ax" @@ -47,6 +48,16 @@ ldp x29, lr, [\ctxt, #CPU_XREG_OFFSET(29)] .endm +.macro save_sp_el0 ctxt, tmp + mrs \tmp, sp_el0 + str \tmp, [\ctxt, #CPU_SP_EL0_OFFSET] +.endm + +.macro restore_sp_el0 ctxt, tmp + ldr \tmp, [\ctxt, #CPU_SP_EL0_OFFSET] + msr sp_el0, \tmp +.endm + /* * u64 __guest_enter(struct kvm_vcpu *vcpu, * struct kvm_cpu_context *host_ctxt); @@ -60,6 +71,9 @@ SYM_FUNC_START(__guest_enter) // Store the host regs save_callee_saved_regs x1 + // Save the host's sp_el0 + save_sp_el0 x1, x2 + // Now the host state is stored if we have a pending RAS SError it must // affect the host. If any asynchronous exception is pending we defer // the guest entry. The DSB isn't necessary before v8.2 as any SError @@ -83,6 +97,9 @@ alternative_else_nop_endif // when this feature is enabled for kernel code. ptrauth_switch_to_guest x29, x0, x1, x2 + // Restore the guest's sp_el0 + restore_sp_el0 x29, x0 + // Restore guest regs x0-x17 ldp x0, x1, [x29, #CPU_XREG_OFFSET(0)] ldp x2, x3, [x29, #CPU_XREG_OFFSET(2)] @@ -130,6 +147,9 @@ SYM_INNER_LABEL(__guest_exit, SYM_L_GLOBAL) // Store the guest regs x18-x29, lr save_callee_saved_regs x1 + // Store the guest's sp_el0 + save_sp_el0 x1, x2 + get_host_ctxt x2, x3 // Macro ptrauth_switch_to_guest format: @@ -139,6 +159,9 @@ SYM_INNER_LABEL(__guest_exit, SYM_L_GLOBAL) // when this feature is enabled for kernel code. ptrauth_switch_to_host x1, x2, x3, x4, x5 + // Restore the hosts's sp_el0 + restore_sp_el0 x2, x3 + // Now restore the host regs restore_callee_saved_regs x2 diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S index c2a13ab3c471..9c5cfb04170e 100644 --- a/arch/arm64/kvm/hyp/hyp-entry.S +++ b/arch/arm64/kvm/hyp/hyp-entry.S @@ -198,7 +198,6 @@ SYM_CODE_END(__hyp_panic) .macro invalid_vector label, target = __hyp_panic .align 2 SYM_CODE_START(\label) -\label: b \target SYM_CODE_END(\label) .endm diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c index 75b1925763f1..6d2df9fe0b5d 100644 --- a/arch/arm64/kvm/hyp/sysreg-sr.c +++ b/arch/arm64/kvm/hyp/sysreg-sr.c @@ -15,8 +15,9 @@ /* * Non-VHE: Both host and guest must save everything. * - * VHE: Host and guest must save mdscr_el1 and sp_el0 (and the PC and pstate, - * which are handled as part of the el2 return state) on every switch. + * VHE: Host and guest must save mdscr_el1 and sp_el0 (and the PC and + * pstate, which are handled as part of the el2 return state) on every + * switch (sp_el0 is being dealt with in the assembly code). * tpidr_el0 and tpidrro_el0 only need to be switched when going * to host userspace or a different VCPU. EL1 registers only need to be * switched when potentially going to run a different VCPU. The latter two @@ -26,12 +27,6 @@ static void __hyp_text __sysreg_save_common_state(struct kvm_cpu_context *ctxt) { ctxt->sys_regs[MDSCR_EL1] = read_sysreg(mdscr_el1); - - /* - * The host arm64 Linux uses sp_el0 to point to 'current' and it must - * therefore be saved/restored on every entry/exit to/from the guest. - */ - ctxt->gp_regs.regs.sp = read_sysreg(sp_el0); } static void __hyp_text __sysreg_save_user_state(struct kvm_cpu_context *ctxt) @@ -99,12 +94,6 @@ NOKPROBE_SYMBOL(sysreg_save_guest_state_vhe); static void __hyp_text __sysreg_restore_common_state(struct kvm_cpu_context *ctxt) { write_sysreg(ctxt->sys_regs[MDSCR_EL1], mdscr_el1); - - /* - * The host arm64 Linux uses sp_el0 to point to 'current' and it must - * therefore be saved/restored on every entry/exit to/from the guest. - */ - write_sysreg(ctxt->gp_regs.regs.sp, sp_el0); } static void __hyp_text __sysreg_restore_user_state(struct kvm_cpu_context *ctxt) diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index e15166b0a16d..ad2f172c26a6 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -521,6 +521,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_IOEVENTFD: case KVM_CAP_DEVICE_CTRL: case KVM_CAP_IMMEDIATE_EXIT: + case KVM_CAP_SET_GUEST_DEBUG: r = 1; break; case KVM_CAP_PPC_GUEST_DEBUG_SSTEP: diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 5dcf9ff12828..d05bb040fd42 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -545,6 +545,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_S390_AIS: case KVM_CAP_S390_AIS_MIGRATION: case KVM_CAP_S390_VCPU_RESETS: + case KVM_CAP_SET_GUEST_DEBUG: r = 1; break; case KVM_CAP_S390_HPAGE_1M: diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 69a824f9ef0b..893893642415 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -626,10 +626,12 @@ static int handle_pqap(struct kvm_vcpu *vcpu) * available for the guest are AQIC and TAPQ with the t bit set * since we do not set IC.3 (FIII) we currently will only intercept * the AQIC function code. + * Note: running nested under z/VM can result in intercepts for other + * function codes, e.g. PQAP(QCI). We do not support this and bail out. */ reg0 = vcpu->run->s.regs.gprs[0]; fc = (reg0 >> 24) & 0xff; - if (WARN_ON_ONCE(fc != 0x03)) + if (fc != 0x03) return -EOPNOTSUPP; /* PQAP instruction is allowed for guest kernel only */ diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 42a2d0d3984a..0dea9f122bb9 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1663,8 +1663,8 @@ void kvm_set_msi_irq(struct kvm *kvm, struct kvm_kernel_irq_routing_entry *e, static inline bool kvm_irq_is_postable(struct kvm_lapic_irq *irq) { /* We can only post Fixed and LowPrio IRQs */ - return (irq->delivery_mode == dest_Fixed || - irq->delivery_mode == dest_LowestPrio); + return (irq->delivery_mode == APIC_DM_FIXED || + irq->delivery_mode == APIC_DM_LOWEST); } static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c index 750ff0b29404..d057376bd3d3 100644 --- a/arch/x86/kvm/ioapic.c +++ b/arch/x86/kvm/ioapic.c @@ -225,12 +225,12 @@ static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq, } /* - * AMD SVM AVIC accelerate EOI write and do not trap, - * in-kernel IOAPIC will not be able to receive the EOI. - * In this case, we do lazy update of the pending EOI when - * trying to set IOAPIC irq. + * AMD SVM AVIC accelerate EOI write iff the interrupt is edge + * triggered, in which case the in-kernel IOAPIC will not be able + * to receive the EOI. In this case, we do a lazy update of the + * pending EOI when trying to set IOAPIC irq. */ - if (kvm_apicv_activated(ioapic->kvm)) + if (edge && kvm_apicv_activated(ioapic->kvm)) ioapic_lazy_update_eoi(ioapic, irq); /* diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 2f379bacbb26..38f6aeefeb55 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -1752,6 +1752,8 @@ static int db_interception(struct vcpu_svm *svm) if (svm->vcpu.guest_debug & (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) { kvm_run->exit_reason = KVM_EXIT_DEBUG; + kvm_run->debug.arch.dr6 = svm->vmcb->save.dr6; + kvm_run->debug.arch.dr7 = svm->vmcb->save.dr7; kvm_run->debug.arch.pc = svm->vmcb->save.cs.base + svm->vmcb->save.rip; kvm_run->debug.arch.exception = DB_VECTOR; diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index fd78ffbde644..e44f33c82332 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -5165,7 +5165,7 @@ static int handle_invept(struct kvm_vcpu *vcpu) */ break; default: - BUG_ON(1); + BUG(); break; } diff --git a/arch/x86/kvm/vmx/vmenter.S b/arch/x86/kvm/vmx/vmenter.S index 87f3f24fef37..51d1a82742fd 100644 --- a/arch/x86/kvm/vmx/vmenter.S +++ b/arch/x86/kvm/vmx/vmenter.S @@ -82,6 +82,9 @@ SYM_FUNC_START(vmx_vmexit) /* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */ FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE + /* Clear RFLAGS.CF and RFLAGS.ZF to preserve VM-Exit, i.e. !VM-Fail. */ + or $1, %_ASM_AX + pop %_ASM_AX .Lvmexit_skip_rsb: #endif diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c5835f9cb9ad..d786c7d27ce5 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -926,19 +926,6 @@ EXPORT_SYMBOL_GPL(kvm_set_xcr); __reserved_bits; \ }) -static u64 kvm_host_cr4_reserved_bits(struct cpuinfo_x86 *c) -{ - u64 reserved_bits = __cr4_reserved_bits(cpu_has, c); - - if (kvm_cpu_cap_has(X86_FEATURE_LA57)) - reserved_bits &= ~X86_CR4_LA57; - - if (kvm_cpu_cap_has(X86_FEATURE_UMIP)) - reserved_bits &= ~X86_CR4_UMIP; - - return reserved_bits; -} - static int kvm_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) { if (cr4 & cr4_reserved_bits) @@ -3385,6 +3372,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_GET_MSR_FEATURES: case KVM_CAP_MSR_PLATFORM_INFO: case KVM_CAP_EXCEPTION_PAYLOAD: + case KVM_CAP_SET_GUEST_DEBUG: r = 1; break; case KVM_CAP_SYNC_REGS: @@ -9675,7 +9663,9 @@ int kvm_arch_hardware_setup(void *opaque) if (!kvm_cpu_cap_has(X86_FEATURE_XSAVES)) supported_xss = 0; - cr4_reserved_bits = kvm_host_cr4_reserved_bits(&boot_cpu_data); +#define __kvm_cpu_cap_has(UNUSED_, f) kvm_cpu_cap_has(f) + cr4_reserved_bits = __cr4_reserved_bits(__kvm_cpu_cap_has, UNUSED_); +#undef __kvm_cpu_cap_has if (kvm_has_tsc_control) { /* @@ -9707,7 +9697,8 @@ int kvm_arch_check_processor_compat(void *opaque) WARN_ON(!irqs_disabled()); - if (kvm_host_cr4_reserved_bits(c) != cr4_reserved_bits) + if (__cr4_reserved_bits(cpu_has, c) != + __cr4_reserved_bits(cpu_has, &boot_cpu_data)) return -EIO; return ops->check_processor_compatibility(); diff --git a/tools/testing/selftests/kvm/include/evmcs.h b/tools/testing/selftests/kvm/include/evmcs.h index d8f4d6bfe05d..a034438b6266 100644 --- a/tools/testing/selftests/kvm/include/evmcs.h +++ b/tools/testing/selftests/kvm/include/evmcs.h @@ -219,8 +219,8 @@ struct hv_enlightened_vmcs { #define HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_MASK \ (~((1ull << HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_SHIFT) - 1)) -struct hv_enlightened_vmcs *current_evmcs; -struct hv_vp_assist_page *current_vp_assist; +extern struct hv_enlightened_vmcs *current_evmcs; +extern struct hv_vp_assist_page *current_vp_assist; int vcpu_enable_evmcs(struct kvm_vm *vm, int vcpu_id); diff --git a/tools/testing/selftests/kvm/lib/x86_64/vmx.c b/tools/testing/selftests/kvm/lib/x86_64/vmx.c index 6f17f69394be..4ae104f6ce69 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/vmx.c +++ b/tools/testing/selftests/kvm/lib/x86_64/vmx.c @@ -17,6 +17,9 @@ bool enable_evmcs; +struct hv_enlightened_vmcs *current_evmcs; +struct hv_vp_assist_page *current_vp_assist; + struct eptPageTableEntry { uint64_t readable:1; uint64_t writable:1; diff --git a/virt/kvm/arm/hyp/aarch32.c b/virt/kvm/arm/hyp/aarch32.c index d31f267961e7..25c0e47d57cb 100644 --- a/virt/kvm/arm/hyp/aarch32.c +++ b/virt/kvm/arm/hyp/aarch32.c @@ -125,12 +125,16 @@ static void __hyp_text kvm_adjust_itstate(struct kvm_vcpu *vcpu) */ void __hyp_text kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr) { + u32 pc = *vcpu_pc(vcpu); bool is_thumb; is_thumb = !!(*vcpu_cpsr(vcpu) & PSR_AA32_T_BIT); if (is_thumb && !is_wide_instr) - *vcpu_pc(vcpu) += 2; + pc += 2; else - *vcpu_pc(vcpu) += 4; + pc += 4; + + *vcpu_pc(vcpu) = pc; + kvm_adjust_itstate(vcpu); } diff --git a/virt/kvm/arm/psci.c b/virt/kvm/arm/psci.c index 14a162e295a9..ae364716ee40 100644 --- a/virt/kvm/arm/psci.c +++ b/virt/kvm/arm/psci.c @@ -186,6 +186,33 @@ static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_RESET); } +static void kvm_psci_narrow_to_32bit(struct kvm_vcpu *vcpu) +{ + int i; + + /* + * Zero the input registers' upper 32 bits. They will be fully + * zeroed on exit, so we're fine changing them in place. + */ + for (i = 1; i < 4; i++) + vcpu_set_reg(vcpu, i, lower_32_bits(vcpu_get_reg(vcpu, i))); +} + +static unsigned long kvm_psci_check_allowed_function(struct kvm_vcpu *vcpu, u32 fn) +{ + switch(fn) { + case PSCI_0_2_FN64_CPU_SUSPEND: + case PSCI_0_2_FN64_CPU_ON: + case PSCI_0_2_FN64_AFFINITY_INFO: + /* Disallow these functions for 32bit guests */ + if (vcpu_mode_is_32bit(vcpu)) + return PSCI_RET_NOT_SUPPORTED; + break; + } + + return 0; +} + static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu) { struct kvm *kvm = vcpu->kvm; @@ -193,6 +220,10 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu) unsigned long val; int ret = 1; + val = kvm_psci_check_allowed_function(vcpu, psci_fn); + if (val) + goto out; + switch (psci_fn) { case PSCI_0_2_FN_PSCI_VERSION: /* @@ -210,12 +241,16 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu) val = PSCI_RET_SUCCESS; break; case PSCI_0_2_FN_CPU_ON: + kvm_psci_narrow_to_32bit(vcpu); + fallthrough; case PSCI_0_2_FN64_CPU_ON: mutex_lock(&kvm->lock); val = kvm_psci_vcpu_on(vcpu); mutex_unlock(&kvm->lock); break; case PSCI_0_2_FN_AFFINITY_INFO: + kvm_psci_narrow_to_32bit(vcpu); + fallthrough; case PSCI_0_2_FN64_AFFINITY_INFO: val = kvm_psci_vcpu_affinity_info(vcpu); break; @@ -256,6 +291,7 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu) break; } +out: smccc_set_retval(vcpu, val, 0, 0, 0); return ret; } @@ -273,6 +309,10 @@ static int kvm_psci_1_0_call(struct kvm_vcpu *vcpu) break; case PSCI_1_0_FN_PSCI_FEATURES: feature = smccc_get_arg1(vcpu); + val = kvm_psci_check_allowed_function(vcpu, feature); + if (val) + break; + switch(feature) { case PSCI_0_2_FN_PSCI_VERSION: case PSCI_0_2_FN_CPU_SUSPEND: diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c index a963b9d766b7..32e32d67a127 100644 --- a/virt/kvm/arm/vgic/vgic-init.c +++ b/virt/kvm/arm/vgic/vgic-init.c @@ -294,8 +294,15 @@ int vgic_init(struct kvm *kvm) } } - if (vgic_has_its(kvm)) { + if (vgic_has_its(kvm)) vgic_lpi_translation_cache_init(kvm); + + /* + * If we have GICv4.1 enabled, unconditionnaly request enable the + * v4 support so that we get HW-accelerated vSGIs. Otherwise, only + * enable it if we present a virtual ITS to the guest. + */ + if (vgic_supports_direct_msis(kvm)) { ret = vgic_v4_init(kvm); if (ret) goto out; @@ -348,6 +355,12 @@ void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu) { struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; + /* + * Retire all pending LPIs on this vcpu anyway as we're + * going to destroy it. + */ + vgic_flush_pending_lpis(vcpu); + INIT_LIST_HEAD(&vgic_cpu->ap_list_head); } @@ -359,10 +372,10 @@ static void __kvm_vgic_destroy(struct kvm *kvm) vgic_debug_destroy(kvm); - kvm_vgic_dist_destroy(kvm); - kvm_for_each_vcpu(i, vcpu, kvm) kvm_vgic_vcpu_destroy(vcpu); + + kvm_vgic_dist_destroy(kvm); } void kvm_vgic_destroy(struct kvm *kvm) diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c index d53d34a33e35..c012a52b19f5 100644 --- a/virt/kvm/arm/vgic/vgic-its.c +++ b/virt/kvm/arm/vgic/vgic-its.c @@ -96,14 +96,21 @@ out_unlock: * We "cache" the configuration table entries in our struct vgic_irq's. * However we only have those structs for mapped IRQs, so we read in * the respective config data from memory here upon mapping the LPI. + * + * Should any of these fail, behave as if we couldn't create the LPI + * by dropping the refcount and returning the error. */ ret = update_lpi_config(kvm, irq, NULL, false); - if (ret) + if (ret) { + vgic_put_irq(kvm, irq); return ERR_PTR(ret); + } ret = vgic_v3_lpi_sync_pending_status(kvm, irq); - if (ret) + if (ret) { + vgic_put_irq(kvm, irq); return ERR_PTR(ret); + } return irq; } diff --git a/virt/kvm/arm/vgic/vgic-mmio-v2.c b/virt/kvm/arm/vgic/vgic-mmio-v2.c index 5945f062d749..a016f07adc28 100644 --- a/virt/kvm/arm/vgic/vgic-mmio-v2.c +++ b/virt/kvm/arm/vgic/vgic-mmio-v2.c @@ -409,24 +409,28 @@ static const struct vgic_register_region vgic_v2_dist_registers[] = { NULL, vgic_mmio_uaccess_write_v2_group, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ENABLE_SET, - vgic_mmio_read_enable, vgic_mmio_write_senable, NULL, NULL, 1, + vgic_mmio_read_enable, vgic_mmio_write_senable, + NULL, vgic_uaccess_write_senable, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ENABLE_CLEAR, - vgic_mmio_read_enable, vgic_mmio_write_cenable, NULL, NULL, 1, + vgic_mmio_read_enable, vgic_mmio_write_cenable, + NULL, vgic_uaccess_write_cenable, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_SET, - vgic_mmio_read_pending, vgic_mmio_write_spending, NULL, NULL, 1, + vgic_mmio_read_pending, vgic_mmio_write_spending, + NULL, vgic_uaccess_write_spending, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_CLEAR, - vgic_mmio_read_pending, vgic_mmio_write_cpending, NULL, NULL, 1, + vgic_mmio_read_pending, vgic_mmio_write_cpending, + NULL, vgic_uaccess_write_cpending, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_SET, vgic_mmio_read_active, vgic_mmio_write_sactive, - NULL, vgic_mmio_uaccess_write_sactive, 1, + vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_CLEAR, vgic_mmio_read_active, vgic_mmio_write_cactive, - NULL, vgic_mmio_uaccess_write_cactive, 1, + vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PRI, vgic_mmio_read_priority, vgic_mmio_write_priority, NULL, NULL, diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c index e72dcc454247..89a14ec8b33b 100644 --- a/virt/kvm/arm/vgic/vgic-mmio-v3.c +++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c @@ -50,7 +50,8 @@ bool vgic_has_its(struct kvm *kvm) bool vgic_supports_direct_msis(struct kvm *kvm) { - return kvm_vgic_global_state.has_gicv4 && vgic_has_its(kvm); + return (kvm_vgic_global_state.has_gicv4_1 || + (kvm_vgic_global_state.has_gicv4 && vgic_has_its(kvm))); } /* @@ -538,10 +539,12 @@ static const struct vgic_register_region vgic_v3_dist_registers[] = { vgic_mmio_read_group, vgic_mmio_write_group, NULL, NULL, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISENABLER, - vgic_mmio_read_enable, vgic_mmio_write_senable, NULL, NULL, 1, + vgic_mmio_read_enable, vgic_mmio_write_senable, + NULL, vgic_uaccess_write_senable, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICENABLER, - vgic_mmio_read_enable, vgic_mmio_write_cenable, NULL, NULL, 1, + vgic_mmio_read_enable, vgic_mmio_write_cenable, + NULL, vgic_uaccess_write_cenable, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISPENDR, vgic_mmio_read_pending, vgic_mmio_write_spending, @@ -553,11 +556,11 @@ static const struct vgic_register_region vgic_v3_dist_registers[] = { VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISACTIVER, vgic_mmio_read_active, vgic_mmio_write_sactive, - NULL, vgic_mmio_uaccess_write_sactive, 1, + vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICACTIVER, vgic_mmio_read_active, vgic_mmio_write_cactive, - NULL, vgic_mmio_uaccess_write_cactive, + vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive, 1, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_IPRIORITYR, vgic_mmio_read_priority, vgic_mmio_write_priority, NULL, NULL, @@ -609,11 +612,13 @@ static const struct vgic_register_region vgic_v3_rd_registers[] = { REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_IGROUPR0, vgic_mmio_read_group, vgic_mmio_write_group, 4, VGIC_ACCESS_32bit), - REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_ISENABLER0, - vgic_mmio_read_enable, vgic_mmio_write_senable, 4, + REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISENABLER0, + vgic_mmio_read_enable, vgic_mmio_write_senable, + NULL, vgic_uaccess_write_senable, 4, VGIC_ACCESS_32bit), - REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_ICENABLER0, - vgic_mmio_read_enable, vgic_mmio_write_cenable, 4, + REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICENABLER0, + vgic_mmio_read_enable, vgic_mmio_write_cenable, + NULL, vgic_uaccess_write_cenable, 4, VGIC_ACCESS_32bit), REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISPENDR0, vgic_mmio_read_pending, vgic_mmio_write_spending, @@ -625,12 +630,12 @@ static const struct vgic_register_region vgic_v3_rd_registers[] = { VGIC_ACCESS_32bit), REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISACTIVER0, vgic_mmio_read_active, vgic_mmio_write_sactive, - NULL, vgic_mmio_uaccess_write_sactive, - 4, VGIC_ACCESS_32bit), + vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 4, + VGIC_ACCESS_32bit), REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICACTIVER0, vgic_mmio_read_active, vgic_mmio_write_cactive, - NULL, vgic_mmio_uaccess_write_cactive, - 4, VGIC_ACCESS_32bit), + vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive, 4, + VGIC_ACCESS_32bit), REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_IPRIORITYR0, vgic_mmio_read_priority, vgic_mmio_write_priority, 32, VGIC_ACCESS_32bit | VGIC_ACCESS_8bit), diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c index 2199302597fa..b2d73fc0d1ef 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.c +++ b/virt/kvm/arm/vgic/vgic-mmio.c @@ -184,6 +184,48 @@ void vgic_mmio_write_cenable(struct kvm_vcpu *vcpu, } } +int vgic_uaccess_write_senable(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val) +{ + u32 intid = VGIC_ADDR_TO_INTID(addr, 1); + int i; + unsigned long flags; + + for_each_set_bit(i, &val, len * 8) { + struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); + + raw_spin_lock_irqsave(&irq->irq_lock, flags); + irq->enabled = true; + vgic_queue_irq_unlock(vcpu->kvm, irq, flags); + + vgic_put_irq(vcpu->kvm, irq); + } + + return 0; +} + +int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val) +{ + u32 intid = VGIC_ADDR_TO_INTID(addr, 1); + int i; + unsigned long flags; + + for_each_set_bit(i, &val, len * 8) { + struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); + + raw_spin_lock_irqsave(&irq->irq_lock, flags); + irq->enabled = false; + raw_spin_unlock_irqrestore(&irq->irq_lock, flags); + + vgic_put_irq(vcpu->kvm, irq); + } + + return 0; +} + unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len) { @@ -219,17 +261,6 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu, return value; } -/* Must be called with irq->irq_lock held */ -static void vgic_hw_irq_spending(struct kvm_vcpu *vcpu, struct vgic_irq *irq, - bool is_uaccess) -{ - if (is_uaccess) - return; - - irq->pending_latch = true; - vgic_irq_set_phys_active(irq, true); -} - static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq) { return (vgic_irq_is_sgi(irq->intid) && @@ -240,7 +271,6 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val) { - bool is_uaccess = !kvm_get_running_vcpu(); u32 intid = VGIC_ADDR_TO_INTID(addr, 1); int i; unsigned long flags; @@ -270,22 +300,48 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu, continue; } + irq->pending_latch = true; if (irq->hw) - vgic_hw_irq_spending(vcpu, irq, is_uaccess); - else - irq->pending_latch = true; + vgic_irq_set_phys_active(irq, true); + vgic_queue_irq_unlock(vcpu->kvm, irq, flags); vgic_put_irq(vcpu->kvm, irq); } } -/* Must be called with irq->irq_lock held */ -static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq, - bool is_uaccess) +int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val) { - if (is_uaccess) - return; + u32 intid = VGIC_ADDR_TO_INTID(addr, 1); + int i; + unsigned long flags; + + for_each_set_bit(i, &val, len * 8) { + struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); + + raw_spin_lock_irqsave(&irq->irq_lock, flags); + irq->pending_latch = true; + /* + * GICv2 SGIs are terribly broken. We can't restore + * the source of the interrupt, so just pick the vcpu + * itself as the source... + */ + if (is_vgic_v2_sgi(vcpu, irq)) + irq->source |= BIT(vcpu->vcpu_id); + + vgic_queue_irq_unlock(vcpu->kvm, irq, flags); + + vgic_put_irq(vcpu->kvm, irq); + } + + return 0; +} + +/* Must be called with irq->irq_lock held */ +static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq) +{ irq->pending_latch = false; /* @@ -308,7 +364,6 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val) { - bool is_uaccess = !kvm_get_running_vcpu(); u32 intid = VGIC_ADDR_TO_INTID(addr, 1); int i; unsigned long flags; @@ -339,7 +394,7 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, } if (irq->hw) - vgic_hw_irq_cpending(vcpu, irq, is_uaccess); + vgic_hw_irq_cpending(vcpu, irq); else irq->pending_latch = false; @@ -348,8 +403,68 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, } } -unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu, - gpa_t addr, unsigned int len) +int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val) +{ + u32 intid = VGIC_ADDR_TO_INTID(addr, 1); + int i; + unsigned long flags; + + for_each_set_bit(i, &val, len * 8) { + struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); + + raw_spin_lock_irqsave(&irq->irq_lock, flags); + /* + * More fun with GICv2 SGIs! If we're clearing one of them + * from userspace, which source vcpu to clear? Let's not + * even think of it, and blow the whole set. + */ + if (is_vgic_v2_sgi(vcpu, irq)) + irq->source = 0; + + irq->pending_latch = false; + + raw_spin_unlock_irqrestore(&irq->irq_lock, flags); + + vgic_put_irq(vcpu->kvm, irq); + } + + return 0; +} + +/* + * If we are fiddling with an IRQ's active state, we have to make sure the IRQ + * is not queued on some running VCPU's LRs, because then the change to the + * active state can be overwritten when the VCPU's state is synced coming back + * from the guest. + * + * For shared interrupts as well as GICv3 private interrupts, we have to + * stop all the VCPUs because interrupts can be migrated while we don't hold + * the IRQ locks and we don't want to be chasing moving targets. + * + * For GICv2 private interrupts we don't have to do anything because + * userspace accesses to the VGIC state already require all VCPUs to be + * stopped, and only the VCPU itself can modify its private interrupts + * active state, which guarantees that the VCPU is not running. + */ +static void vgic_access_active_prepare(struct kvm_vcpu *vcpu, u32 intid) +{ + if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 || + intid >= VGIC_NR_PRIVATE_IRQS) + kvm_arm_halt_guest(vcpu->kvm); +} + +/* See vgic_access_active_prepare */ +static void vgic_access_active_finish(struct kvm_vcpu *vcpu, u32 intid) +{ + if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 || + intid >= VGIC_NR_PRIVATE_IRQS) + kvm_arm_resume_guest(vcpu->kvm); +} + +static unsigned long __vgic_mmio_read_active(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len) { u32 intid = VGIC_ADDR_TO_INTID(addr, 1); u32 value = 0; @@ -359,6 +474,10 @@ unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu, for (i = 0; i < len * 8; i++) { struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); + /* + * Even for HW interrupts, don't evaluate the HW state as + * all the guest is interested in is the virtual state. + */ if (irq->active) value |= (1U << i); @@ -368,6 +487,29 @@ unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu, return value; } +unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len) +{ + u32 intid = VGIC_ADDR_TO_INTID(addr, 1); + u32 val; + + mutex_lock(&vcpu->kvm->lock); + vgic_access_active_prepare(vcpu, intid); + + val = __vgic_mmio_read_active(vcpu, addr, len); + + vgic_access_active_finish(vcpu, intid); + mutex_unlock(&vcpu->kvm->lock); + + return val; +} + +unsigned long vgic_uaccess_read_active(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len) +{ + return __vgic_mmio_read_active(vcpu, addr, len); +} + /* Must be called with irq->irq_lock held */ static void vgic_hw_irq_change_active(struct kvm_vcpu *vcpu, struct vgic_irq *irq, bool active, bool is_uaccess) @@ -426,36 +568,6 @@ static void vgic_mmio_change_active(struct kvm_vcpu *vcpu, struct vgic_irq *irq, raw_spin_unlock_irqrestore(&irq->irq_lock, flags); } -/* - * If we are fiddling with an IRQ's active state, we have to make sure the IRQ - * is not queued on some running VCPU's LRs, because then the change to the - * active state can be overwritten when the VCPU's state is synced coming back - * from the guest. - * - * For shared interrupts, we have to stop all the VCPUs because interrupts can - * be migrated while we don't hold the IRQ locks and we don't want to be - * chasing moving targets. - * - * For private interrupts we don't have to do anything because userspace - * accesses to the VGIC state already require all VCPUs to be stopped, and - * only the VCPU itself can modify its private interrupts active state, which - * guarantees that the VCPU is not running. - */ -static void vgic_change_active_prepare(struct kvm_vcpu *vcpu, u32 intid) -{ - if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 || - intid > VGIC_NR_PRIVATE_IRQS) - kvm_arm_halt_guest(vcpu->kvm); -} - -/* See vgic_change_active_prepare */ -static void vgic_change_active_finish(struct kvm_vcpu *vcpu, u32 intid) -{ - if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 || - intid > VGIC_NR_PRIVATE_IRQS) - kvm_arm_resume_guest(vcpu->kvm); -} - static void __vgic_mmio_write_cactive(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val) @@ -477,11 +589,11 @@ void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu, u32 intid = VGIC_ADDR_TO_INTID(addr, 1); mutex_lock(&vcpu->kvm->lock); - vgic_change_active_prepare(vcpu, intid); + vgic_access_active_prepare(vcpu, intid); __vgic_mmio_write_cactive(vcpu, addr, len, val); - vgic_change_active_finish(vcpu, intid); + vgic_access_active_finish(vcpu, intid); mutex_unlock(&vcpu->kvm->lock); } @@ -514,11 +626,11 @@ void vgic_mmio_write_sactive(struct kvm_vcpu *vcpu, u32 intid = VGIC_ADDR_TO_INTID(addr, 1); mutex_lock(&vcpu->kvm->lock); - vgic_change_active_prepare(vcpu, intid); + vgic_access_active_prepare(vcpu, intid); __vgic_mmio_write_sactive(vcpu, addr, len, val); - vgic_change_active_finish(vcpu, intid); + vgic_access_active_finish(vcpu, intid); mutex_unlock(&vcpu->kvm->lock); } diff --git a/virt/kvm/arm/vgic/vgic-mmio.h b/virt/kvm/arm/vgic/vgic-mmio.h index 5af2aefad435..fefcca2b14dc 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.h +++ b/virt/kvm/arm/vgic/vgic-mmio.h @@ -138,6 +138,14 @@ void vgic_mmio_write_cenable(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val); +int vgic_uaccess_write_senable(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val); + +int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val); + unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len); @@ -149,9 +157,20 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val); +int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val); + +int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val); + unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len); +unsigned long vgic_uaccess_read_active(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len); + void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val); |