diff options
-rw-r--r-- | drivers/mmc/host/sdhci-esdhc.h | 2 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-of-esdhc.c | 28 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.c | 6 |
3 files changed, 34 insertions, 2 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index a30796e79b1c..6de02f09c322 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -5,6 +5,7 @@ * Copyright (c) 2007 Freescale Semiconductor, Inc. * Copyright (c) 2009 MontaVista Software, Inc. * Copyright (c) 2010 Pengutronix e.K. + * Copyright 2020 NXP * Author: Wolfram Sang <kernel@pengutronix.de> */ @@ -88,6 +89,7 @@ /* DLL Config 0 Register */ #define ESDHC_DLLCFG0 0x160 #define ESDHC_DLL_ENABLE 0x80000000 +#define ESDHC_DLL_RESET 0x40000000 #define ESDHC_DLL_FREQ_SEL 0x08000000 /* DLL Config 1 Register */ diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 0b45eff6fed4..bb094459196a 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -4,6 +4,7 @@ * * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc. * Copyright (c) 2009 MontaVista Software, Inc. + * Copyright 2020 NXP * * Authors: Xiaobo Xie <X.Xie@freescale.com> * Anton Vorontsov <avorontsov@ru.mvista.com> @@ -19,6 +20,7 @@ #include <linux/clk.h> #include <linux/ktime.h> #include <linux/dma-mapping.h> +#include <linux/iopoll.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include "sdhci-pltfm.h" @@ -743,6 +745,21 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) if (host->mmc->actual_clock == MMC_HS200_MAX_DTR) temp |= ESDHC_DLL_FREQ_SEL; sdhci_writel(host, temp, ESDHC_DLLCFG0); + + temp |= ESDHC_DLL_RESET; + sdhci_writel(host, temp, ESDHC_DLLCFG0); + udelay(1); + temp &= ~ESDHC_DLL_RESET; + sdhci_writel(host, temp, ESDHC_DLLCFG0); + + /* Wait max 20 ms */ + if (read_poll_timeout(sdhci_readl, temp, + temp & ESDHC_DLL_STS_SLV_LOCK, + 10, 20000, false, + host, ESDHC_DLLSTAT0)) + pr_err("%s: timeout for delay chain lock.\n", + mmc_hostname(host->mmc)); + temp = sdhci_readl(host, ESDHC_TBCTL); sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL); @@ -1052,6 +1069,17 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) esdhc_tuning_block_enable(host, true); + /* + * The eSDHC controller takes the data timeout value into account + * during tuning. If the SD card is too slow sending the response, the + * timer will expire and a "Buffer Read Ready" interrupt without data + * is triggered. This leads to tuning errors. + * + * Just set the timeout to the maximum value because the core will + * already take care of it in sdhci_send_tuning(). + */ + sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL); + hs400_tuning = host->flags & SDHCI_HS400_TUNING; do { diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 592a55a34b58..3561ae8a481a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1384,9 +1384,11 @@ static inline void sdhci_auto_cmd_select(struct sdhci_host *host, /* * In case of Version 4.10 or later, use of 'Auto CMD Auto * Select' is recommended rather than use of 'Auto CMD12 - * Enable' or 'Auto CMD23 Enable'. + * Enable' or 'Auto CMD23 Enable'. We require Version 4 Mode + * here because some controllers (e.g sdhci-of-dwmshc) expect it. */ - if (host->version >= SDHCI_SPEC_410 && (use_cmd12 || use_cmd23)) { + if (host->version >= SDHCI_SPEC_410 && host->v4_mode && + (use_cmd12 || use_cmd23)) { *mode |= SDHCI_TRNS_AUTO_SEL; ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); |