diff options
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | drivers/platform/x86/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/platform/x86/Makefile | 1 | ||||
| -rw-r--r-- | drivers/platform/x86/intel_atomisp2_pm.c | 119 |
4 files changed, 138 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 0112e977eec0..08bddcf43314 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7296,6 +7296,12 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported F: sound/soc/intel/ +INTEL ATOMISP2 DUMMY / POWER-MANAGEMENT DRIVER +M: Hans de Goede <hdegoede@redhat.com> +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/intel_atomisp2_pm.c + INTEL C600 SERIES SAS CONTROLLER DRIVER M: Intel SCU Linux support <intel-linux-scu@intel.com> M: Artur Paszkiewicz <artur.paszkiewicz@intel.com> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 1991608549d5..27a27fca3be1 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1274,6 +1274,18 @@ config I2C_MULTI_INSTANTIATE To compile this driver as a module, choose M here: the module will be called i2c-multi-instantiate. +config INTEL_ATOMISP2_PM + tristate "Intel AtomISP2 dummy / power-management driver" + depends on PCI && IOSF_MBI && PM + help + Power-management driver for Intel's Image Signal Processor found on + Bay and Cherry Trail devices. This dummy driver's sole purpose is to + turn the ISP off (put it in D3) to save power and to allow entering + of S0ix modes. + + To compile this driver as a module, choose M here: the module + will be called intel_atomisp2_pm. + endif # X86_PLATFORM_DEVICES config PMC_ATOM diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 395c8ff12bd1..39ae94135406 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -95,3 +95,4 @@ obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o +obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o diff --git a/drivers/platform/x86/intel_atomisp2_pm.c b/drivers/platform/x86/intel_atomisp2_pm.c new file mode 100644 index 000000000000..9371603a0ac9 --- /dev/null +++ b/drivers/platform/x86/intel_atomisp2_pm.c @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Dummy driver for Intel's Image Signal Processor found on Bay and Cherry + * Trail devices. The sole purpose of this driver is to allow the ISP to + * be put in D3. + * + * Copyright (C) 2018 Hans de Goede <hdegoede@redhat.com> + * + * Based on various non upstream patches for ISP support: + * Copyright (C) 2010-2017 Intel Corporation. All rights reserved. + * Copyright (c) 2010 Silicon Hive www.siliconhive.com. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/pci.h> +#include <linux/pm_runtime.h> +#include <asm/iosf_mbi.h> + +/* PCI configuration regs */ +#define PCI_INTERRUPT_CTRL 0x9c + +#define PCI_CSI_CONTROL 0xe8 +#define PCI_CSI_CONTROL_PORTS_OFF_MASK 0x7 + +/* IOSF BT_MBI_UNIT_PMC regs */ +#define ISPSSPM0 0x39 +#define ISPSSPM0_ISPSSC_OFFSET 0 +#define ISPSSPM0_ISPSSC_MASK 0x00000003 +#define ISPSSPM0_ISPSSS_OFFSET 24 +#define ISPSSPM0_ISPSSS_MASK 0x03000000 +#define ISPSSPM0_IUNIT_POWER_ON 0x0 +#define ISPSSPM0_IUNIT_POWER_OFF 0x3 + +static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + unsigned long timeout; + u32 val; + + pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, 0); + + /* + * MRFLD IUNIT DPHY is located in an always-power-on island + * MRFLD HW design need all CSI ports are disabled before + * powering down the IUNIT. + */ + pci_read_config_dword(dev, PCI_CSI_CONTROL, &val); + val |= PCI_CSI_CONTROL_PORTS_OFF_MASK; + pci_write_config_dword(dev, PCI_CSI_CONTROL, val); + + /* Write 0x3 to ISPSSPM0 bit[1:0] to power off the IUNIT */ + iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, + ISPSSPM0_IUNIT_POWER_OFF, ISPSSPM0_ISPSSC_MASK); + + /* + * There should be no IUNIT access while power-down is + * in progress HW sighting: 4567865 + * Wait up to 50 ms for the IUNIT to shut down. + */ + timeout = jiffies + msecs_to_jiffies(50); + while (1) { + /* Wait until ISPSSPM0 bit[25:24] shows 0x3 */ + iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &val); + val = (val & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET; + if (val == ISPSSPM0_IUNIT_POWER_OFF) + break; + + if (time_after(jiffies, timeout)) { + dev_err(&dev->dev, "IUNIT power-off timeout.\n"); + return -EBUSY; + } + usleep_range(1000, 2000); + } + + pm_runtime_allow(&dev->dev); + pm_runtime_put_sync_suspend(&dev->dev); + + return 0; +} + +static void isp_remove(struct pci_dev *dev) +{ + pm_runtime_get_sync(&dev->dev); + pm_runtime_forbid(&dev->dev); +} + +static int isp_pci_suspend(struct device *dev) +{ + return 0; +} + +static int isp_pci_resume(struct device *dev) +{ + return 0; +} + +static UNIVERSAL_DEV_PM_OPS(isp_pm_ops, isp_pci_suspend, + isp_pci_resume, NULL); + +static const struct pci_device_id isp_id_table[] = { + { PCI_VDEVICE(INTEL, 0x22b8), }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, isp_id_table); + +static struct pci_driver isp_pci_driver = { + .name = "intel_atomisp2_pm", + .id_table = isp_id_table, + .probe = isp_probe, + .remove = isp_remove, + .driver.pm = &isp_pm_ops, +}; + +module_pci_driver(isp_pci_driver); + +MODULE_DESCRIPTION("Intel AtomISP2 dummy / power-management drv (for suspend)"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL v2"); |