21 files changed, 811 insertions, 17 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 11c8bc87fdcb..7e8a498efe6d 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -151,6 +151,11 @@
 /* Mesh Control 802.11s */
 #define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT  0x0100
 
+/* Mesh Power Save Level */
+#define IEEE80211_QOS_CTL_MESH_PS_LEVEL		0x0200
+/* Mesh Receiver Service Period Initiated */
+#define IEEE80211_QOS_CTL_RSPI			0x0400
+
 /* U-APSD queue for WMM IEs sent by AP */
 #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD	(1<<7)
 #define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK	0x0f
@@ -675,11 +680,14 @@ struct ieee80211_meshconf_ie {
  * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs
  * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure
  *	is ongoing
+ * @IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL: STA is in deep sleep mode or has
+ *	neighbors in deep sleep mode
  */
 enum mesh_config_capab_flags {
 	IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS		= 0x01,
 	IEEE80211_MESHCONF_CAPAB_FORWARDING		= 0x08,
 	IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING		= 0x20,
+	IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL	= 0x40,
 };
 
 /**
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index b4ecf267a34b..0ecf947ad378 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -258,6 +258,17 @@ config MAC80211_MESH_SYNC_DEBUG
 
 	  Do not select this option.
 
+config MAC80211_MESH_PS_DEBUG
+	bool "Verbose mesh powersave debugging"
+	depends on MAC80211_DEBUG_MENU
+	depends on MAC80211_MESH
+	---help---
+	  Selecting this option causes mac80211 to print out very verbose mesh
+	  powersave debugging messages (when mac80211 is taking part in a
+	  mesh network).
+
+	  Do not select this option.
+
 config MAC80211_TDLS_DEBUG
 	bool "Verbose TDLS debugging"
 	depends on MAC80211_DEBUG_MENU
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 4911202334d9..9d7d840aac6d 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -39,7 +39,8 @@ mac80211-$(CONFIG_MAC80211_MESH) += \
 	mesh_pathtbl.o \
 	mesh_plink.o \
 	mesh_hwmp.o \
-	mesh_sync.o
+	mesh_sync.o \
+	mesh_ps.o
 
 mac80211-$(CONFIG_PM) += pm.o
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 661b878bd19c..f4f7e7691077 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -492,7 +492,10 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 #ifdef CONFIG_MAC80211_MESH
 		sinfo->filled |= STATION_INFO_LLID |
 				 STATION_INFO_PLID |
-				 STATION_INFO_PLINK_STATE;
+				 STATION_INFO_PLINK_STATE |
+				 STATION_INFO_LOCAL_PM |
+				 STATION_INFO_PEER_PM |
+				 STATION_INFO_NONPEER_PM;
 
 		sinfo->llid = le16_to_cpu(sta->llid);
 		sinfo->plid = le16_to_cpu(sta->plid);
@@ -501,6 +504,9 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 			sinfo->filled |= STATION_INFO_T_OFFSET;
 			sinfo->t_offset = sta->t_offset;
 		}
+		sinfo->local_pm = sta->local_pm;
+		sinfo->peer_pm = sta->peer_pm;
+		sinfo->nonpeer_pm = sta->nonpeer_pm;
 #endif
 	}
 
@@ -1262,6 +1268,10 @@ static int sta_apply_parameters(struct ieee80211_local *local,
 					changed = mesh_plink_inc_estab_count(
 							sdata);
 				sta->plink_state = params->plink_state;
+
+				ieee80211_mps_sta_status_update(sta);
+				ieee80211_mps_set_sta_local_pm(sta,
+					sdata->u.mesh.mshcfg.power_mode);
 				break;
 			case NL80211_PLINK_LISTEN:
 			case NL80211_PLINK_BLOCKED:
@@ -1273,6 +1283,9 @@ static int sta_apply_parameters(struct ieee80211_local *local,
 					changed = mesh_plink_dec_estab_count(
 							sdata);
 				sta->plink_state = params->plink_state;
+
+				ieee80211_mps_sta_status_update(sta);
+				ieee80211_mps_local_status_update(sdata);
 				break;
 			default:
 				/*  nothing  */
@@ -1289,6 +1302,9 @@ static int sta_apply_parameters(struct ieee80211_local *local,
 				break;
 			}
 		}
+
+		if (params->local_pm)
+			ieee80211_mps_set_sta_local_pm(sta, params->local_pm);
 #endif
 	}
 
@@ -1777,6 +1793,15 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask))
 		conf->dot11MeshHWMPconfirmationInterval =
 			nconf->dot11MeshHWMPconfirmationInterval;
+	if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) {
+		conf->power_mode = nconf->power_mode;
+		ieee80211_mps_local_status_update(sdata);
+	}
+	if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) {
+		conf->dot11MeshAwakeWindowDuration =
+			nconf->dot11MeshAwakeWindowDuration;
+		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
+	}
 	return 0;
 }
 
diff --git a/net/mac80211/debug.h b/net/mac80211/debug.h
index 8f383a576016..4ccc5ed6237d 100644
--- a/net/mac80211/debug.h
+++ b/net/mac80211/debug.h
@@ -44,6 +44,12 @@
 #define MAC80211_MESH_SYNC_DEBUG 0
 #endif
 
+#ifdef CONFIG_MAC80211_MESH_PS_DEBUG
+#define MAC80211_MESH_PS_DEBUG 1
+#else
+#define MAC80211_MESH_PS_DEBUG 0
+#endif
+
 #ifdef CONFIG_MAC80211_TDLS_DEBUG
 #define MAC80211_TDLS_DEBUG 1
 #else
@@ -151,6 +157,10 @@ do {									\
 	_sdata_dbg(MAC80211_MESH_SYNC_DEBUG,				\
 		   sdata, fmt, ##__VA_ARGS__)
 
+#define mps_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_MESH_PS_DEBUG,				\
+		   sdata, fmt, ##__VA_ARGS__)
+
 #define tdls_dbg(sdata, fmt, ...)					\
 	_sdata_dbg(MAC80211_TDLS_DEBUG,					\
 		   sdata, fmt, ##__VA_ARGS__)
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index cbde5cc49a40..059bbb82e84f 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -515,6 +515,9 @@ IEEE80211_IF_FILE(dot11MeshHWMProotInterval,
 		  u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC);
 IEEE80211_IF_FILE(dot11MeshHWMPconfirmationInterval,
 		  u.mesh.mshcfg.dot11MeshHWMPconfirmationInterval, DEC);
+IEEE80211_IF_FILE(power_mode, u.mesh.mshcfg.power_mode, DEC);
+IEEE80211_IF_FILE(dot11MeshAwakeWindowDuration,
+		  u.mesh.mshcfg.dot11MeshAwakeWindowDuration, DEC);
 #endif
 
 #define DEBUGFS_ADD_MODE(name, mode) \
@@ -620,6 +623,8 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata)
 	MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout);
 	MESHPARAMS_ADD(dot11MeshHWMProotInterval);
 	MESHPARAMS_ADD(dot11MeshHWMPconfirmationInterval);
+	MESHPARAMS_ADD(power_mode);
+	MESHPARAMS_ADD(dot11MeshAwakeWindowDuration);
 #undef MESHPARAMS_ADD
 }
 #endif
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 6fb1168b9f16..c7591f73dbc3 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -65,7 +65,7 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf,
 	test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
 
 	int res = scnprintf(buf, sizeof(buf),
-			    "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+			    "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
 			    TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
 			    TEST(PS_DRIVER), TEST(AUTHORIZED),
 			    TEST(SHORT_PREAMBLE),
@@ -74,7 +74,8 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf,
 			    TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
 			    TEST(TDLS_PEER_AUTH), TEST(4ADDR_EVENT),
 			    TEST(INSERTED), TEST(RATE_CONTROL),
-			    TEST(TOFFSET_KNOWN));
+			    TEST(TOFFSET_KNOWN), TEST(MPSP_OWNER),
+			    TEST(MPSP_RECIPIENT));
 #undef TEST
 	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
 }
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 8faf360e0b4c..5fe9db707880 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -590,6 +590,11 @@ struct ieee80211_if_mesh {
 	s64 sync_offset_clockdrift_max;
 	spinlock_t sync_offset_lock;
 	bool adjusting_tbtt;
+	/* mesh power save */
+	enum nl80211_mesh_power_mode nonpeer_pm;
+	int ps_peers_light_sleep;
+	int ps_peers_deep_sleep;
+	struct ps_data ps;
 };
 
 #ifdef CONFIG_MAC80211_MESH
@@ -1185,6 +1190,7 @@ struct ieee802_11_elems {
 	struct ieee80211_meshconf_ie *mesh_config;
 	u8 *mesh_id;
 	u8 *peering;
+	__le16 *awake_window;
 	u8 *preq;
 	u8 *prep;
 	u8 *perr;
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index f920da1201ab..35ac38871420 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -261,6 +261,9 @@ mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 	*pos = IEEE80211_MESHCONF_CAPAB_FORWARDING;
 	*pos |= ifmsh->accepting_plinks ?
 	    IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
+	/* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
+	*pos |= ifmsh->ps_peers_deep_sleep ?
+	    IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00;
 	*pos++ |= ifmsh->adjusting_tbtt ?
 	    IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00;
 	*pos++ = 0x00;
@@ -286,6 +289,29 @@ mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 	return 0;
 }
 
+int mesh_add_awake_window_ie(struct sk_buff *skb,
+			     struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	u8 *pos;
+
+	/* see IEEE802.11-2012 13.14.6 */
+	if (ifmsh->ps_peers_light_sleep == 0 &&
+	    ifmsh->ps_peers_deep_sleep == 0 &&
+	    ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE)
+		return 0;
+
+	if (skb_tailroom(skb) < 4)
+		return -ENOMEM;
+
+	pos = skb_put(skb, 2 + 2);
+	*pos++ = WLAN_EID_MESH_AWAKE_WINDOW;
+	*pos++ = 2;
+	put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos);
+
+	return 0;
+}
+
 int
 mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 {
@@ -629,6 +655,8 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 	sdata->vif.bss_conf.basic_rates =
 		ieee80211_mandatory_rates(local, band);
 
+	ieee80211_mps_local_status_update(sdata);
+
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	netif_carrier_on(sdata->dev);
@@ -651,6 +679,10 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 	sta_info_flush(sdata);
 	mesh_path_flush_by_iface(sdata);
 
+	/* free all potentially still buffered group-addressed frames */
+	local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf);
+	skb_queue_purge(&ifmsh->ps.bc_buf);
+
 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
 	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
 	del_timer_sync(&sdata->u.mesh.mesh_path_timer);
@@ -828,6 +860,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 		    ieee80211_mesh_path_root_timer,
 		    (unsigned long) sdata);
 	INIT_LIST_HEAD(&ifmsh->preq_queue.list);
+	skb_queue_head_init(&ifmsh->ps.bc_buf);
 	spin_lock_init(&ifmsh->mesh_preq_queue_lock);
 	spin_lock_init(&ifmsh->sync_offset_lock);
 
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index aff301544c7f..eb336253b6b3 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -222,6 +222,8 @@ int mesh_add_meshid_ie(struct sk_buff *skb,
 		       struct ieee80211_sub_if_data *sdata);
 int mesh_add_rsn_ie(struct sk_buff *skb,
 		    struct ieee80211_sub_if_data *sdata);
+int mesh_add_awake_window_ie(struct sk_buff *skb,
+			     struct ieee80211_sub_if_data *sdata);
 int mesh_add_vendor_ies(struct sk_buff *skb,
 			struct ieee80211_sub_if_data *sdata);
 int mesh_add_ds_params_ie(struct sk_buff *skb,
@@ -242,6 +244,21 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata);
 void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh);
 const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method);
 
+/* mesh power save */
+void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata);
+void ieee80211_mps_set_sta_local_pm(struct sta_info *sta,
+				    enum nl80211_mesh_power_mode pm);
+void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata,
+				   struct sta_info *sta,
+				   struct ieee80211_hdr *hdr);
+void ieee80211_mps_sta_status_update(struct sta_info *sta);
+void ieee80211_mps_rx_h_sta_process(struct sta_info *sta,
+				    struct ieee80211_hdr *hdr);
+void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta,
+				    bool tx, bool acked);
+void ieee80211_mps_frame_release(struct sta_info *sta,
+				 struct ieee802_11_elems *elems);
+
 /* Mesh paths */
 int mesh_nexthop_lookup(struct sk_buff *skb,
 		struct ieee80211_sub_if_data *sdata);
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 6b4603a90031..f0dd8742ed42 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -205,6 +205,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata,
 		struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 
 	skb_set_mac_header(skb, 0);
 	skb_set_network_header(skb, 0);
@@ -217,6 +218,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata,
 	info->control.vif = &sdata->vif;
 	info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
 	ieee80211_set_qos_hdr(sdata, skb);
+	ieee80211_mps_set_frame_flags(sdata, NULL, hdr);
 }
 
 /**
@@ -1080,6 +1082,10 @@ int mesh_nexthop_resolve(struct sk_buff *skb,
 	u8 *target_addr = hdr->addr3;
 	int err = 0;
 
+	/* Nulls are only sent to peers for PS and should be pre-addressed */
+	if (ieee80211_is_qos_nullfunc(hdr->frame_control))
+		return 0;
+
 	rcu_read_lock();
 	err = mesh_nexthop_lookup(skb, sdata);
 	if (!err)
@@ -1151,6 +1157,7 @@ int mesh_nexthop_lookup(struct sk_buff *skb,
 	if (next_hop) {
 		memcpy(hdr->addr1, next_hop->sta.addr, ETH_ALEN);
 		memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN);
+		ieee80211_mps_set_frame_flags(sdata, next_hop, hdr);
 		err = 0;
 	}
 
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index aa749818860e..d5786c3eaee2 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -212,6 +212,7 @@ void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta)
 		hdr = (struct ieee80211_hdr *) skb->data;
 		memcpy(hdr->addr1, sta->sta.addr, ETH_ALEN);
 		memcpy(hdr->addr2, mpath->sdata->vif.addr, ETH_ALEN);
+		ieee80211_mps_set_frame_flags(sta->sdata, sta, hdr);
 	}
 
 	spin_unlock_irqrestore(&mpath->frame_queue.lock, flags);
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 6787d696d94c..fe7c3334d6fe 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -201,6 +201,9 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta)
 	sta->plink_state = NL80211_PLINK_BLOCKED;
 	mesh_path_flush_by_nexthop(sta);
 
+	ieee80211_mps_sta_status_update(sta);
+	ieee80211_mps_local_status_update(sdata);
+
 	return changed;
 }
 
@@ -503,6 +506,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
 	    rssi_threshold_check(sta, sdata))
 		mesh_plink_open(sta);
 
+	ieee80211_mps_frame_release(sta, elems);
 out:
 	rcu_read_unlock();
 }
@@ -633,6 +637,9 @@ int mesh_plink_open(struct sta_info *sta)
 		"Mesh plink: starting establishment with %pM\n",
 		sta->sta.addr);
 
+	/* set the non-peer mode to active during peering */
+	ieee80211_mps_local_status_update(sdata);
+
 	return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
 				   sta->sta.addr, llid, 0, 0);
 }
@@ -866,6 +873,10 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			sta->llid = llid;
 			mesh_plink_timer_set(sta,
 					     mshcfg->dot11MeshRetryTimeout);
+
+			/* set the non-peer mode to active during peering */
+			ieee80211_mps_local_status_update(sdata);
+
 			spin_unlock_bh(&sta->lock);
 			mesh_plink_frame_tx(sdata,
 					    WLAN_SP_MESH_PEERING_OPEN,
@@ -959,6 +970,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			changed |= mesh_set_short_slot_time(sdata);
 			mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n",
 				sta->sta.addr);
+			ieee80211_mps_sta_status_update(sta);
+			ieee80211_mps_set_sta_local_pm(sta,
+						       mshcfg->power_mode);
 			break;
 		default:
 			spin_unlock_bh(&sta->lock);
@@ -998,6 +1012,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			mesh_plink_frame_tx(sdata,
 					    WLAN_SP_MESH_PEERING_CONFIRM,
 					    sta->sta.addr, llid, plid, 0);
+			ieee80211_mps_sta_status_update(sta);
+			ieee80211_mps_set_sta_local_pm(sta,
+						       mshcfg->power_mode);
 			break;
 		default:
 			spin_unlock_bh(&sta->lock);
diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c
new file mode 100644
index 000000000000..b677962525ed
--- /dev/null
+++ b/net/mac80211/mesh_ps.c
@@ -0,0 +1,585 @@
+/*
+ * Copyright 2012-2013, Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
+ * Copyright 2012-2013, cozybit Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "mesh.h"
+#include "wme.h"
+
+
+/* mesh PS management */
+
+/**
+ * mps_qos_null_get - create pre-addressed QoS Null frame for mesh powersave
+ */
+static struct sk_buff *mps_qos_null_get(struct sta_info *sta)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_hdr *nullfunc; /* use 4addr header */
+	struct sk_buff *skb;
+	int size = sizeof(*nullfunc);
+	__le16 fc;
+
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + size + 2);
+	if (!skb)
+		return NULL;
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+
+	nullfunc = (struct ieee80211_hdr *) skb_put(skb, size);
+	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
+	ieee80211_fill_mesh_addresses(nullfunc, &fc, sta->sta.addr,
+				      sdata->vif.addr);
+	nullfunc->frame_control = fc;
+	nullfunc->duration_id = 0;
+	/* no address resolution for this frame -> set addr 1 immediately */
+	memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN);
+	memset(skb_put(skb, 2), 0, 2); /* append QoS control field */
+	ieee80211_mps_set_frame_flags(sdata, sta, nullfunc);
+
+	return skb;
+}
+
+/**
+ * mps_qos_null_tx - send a QoS Null to indicate link-specific power mode
+ */
+static void mps_qos_null_tx(struct sta_info *sta)
+{
+	struct sk_buff *skb;
+
+	skb = mps_qos_null_get(sta);
+	if (!skb)
+		return;
+
+	mps_dbg(sta->sdata, "announcing peer-specific power mode to %pM\n",
+		sta->sta.addr);
+
+	/* don't unintentionally start a MPSP */
+	if (!test_sta_flag(sta, WLAN_STA_PS_STA)) {
+		u8 *qc = ieee80211_get_qos_ctl((void *) skb->data);
+
+		qc[0] |= IEEE80211_QOS_CTL_EOSP;
+	}
+
+	ieee80211_tx_skb(sta->sdata, skb);
+}
+
+/**
+ * ieee80211_mps_local_status_update - track status of local link-specific PMs
+ *
+ * @sdata: local mesh subif
+ *
+ * sets the non-peer power mode and triggers the driver PS (re-)configuration
+ */
+void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	struct sta_info *sta;
+	bool peering = false;
+	int light_sleep_cnt = 0;
+	int deep_sleep_cnt = 0;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) {
+		if (sdata != sta->sdata)
+			continue;
+
+		switch (sta->plink_state) {
+		case NL80211_PLINK_OPN_SNT:
+		case NL80211_PLINK_OPN_RCVD:
+		case NL80211_PLINK_CNF_RCVD:
+			peering = true;
+			break;
+		case NL80211_PLINK_ESTAB:
+			if (sta->local_pm == NL80211_MESH_POWER_LIGHT_SLEEP)
+				light_sleep_cnt++;
+			else if (sta->local_pm == NL80211_MESH_POWER_DEEP_SLEEP)
+				deep_sleep_cnt++;
+			break;
+		default:
+			break;
+		}
+	}
+	rcu_read_unlock();
+
+	/*
+	 * Set non-peer mode to active during peering/scanning/authentication
+	 * (see IEEE802.11-2012 13.14.8.3). The non-peer mesh power mode is
+	 * deep sleep if the local STA is in light or deep sleep towards at
+	 * least one mesh peer (see 13.14.3.1). Otherwise, set it to the
+	 * user-configured default value.
+	 */
+	if (peering) {
+		mps_dbg(sdata, "setting non-peer PM to active for peering\n");
+		ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE;
+	} else if (light_sleep_cnt || deep_sleep_cnt) {
+		mps_dbg(sdata, "setting non-peer PM to deep sleep\n");
+		ifmsh->nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP;
+	} else {
+		mps_dbg(sdata, "setting non-peer PM to user value\n");
+		ifmsh->nonpeer_pm = ifmsh->mshcfg.power_mode;
+	}
+
+	ifmsh->ps_peers_light_sleep = light_sleep_cnt;
+	ifmsh->ps_peers_deep_sleep = deep_sleep_cnt;
+}
+
+/**
+ * ieee80211_mps_set_sta_local_pm - set local PM towards a mesh STA
+ *
+ * @sta: mesh STA
+ * @pm: the power mode to set
+ */
+void ieee80211_mps_set_sta_local_pm(struct sta_info *sta,
+				    enum nl80211_mesh_power_mode pm)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+
+	mps_dbg(sdata, "local STA operates in mode %d with %pM\n",
+		pm, sta->sta.addr);
+
+	sta->local_pm = pm;
+
+	/*
+	 * announce peer-specific power mode transition
+	 * (see IEEE802.11-2012 13.14.3.2 and 13.14.3.3)
+	 */
+	if (sta->plink_state == NL80211_PLINK_ESTAB)
+		mps_qos_null_tx(sta);
+
+	ieee80211_mps_local_status_update(sdata);
+}
+
+/**
+ * ieee80211_mps_set_frame_flags - set mesh PS flags in FC (and QoS Control)
+ *
+ * @sdata: local mesh subif
+ * @sta: mesh STA
+ * @hdr: 802.11 frame header
+ *
+ * see IEEE802.11-2012 8.2.4.1.7 and 8.2.4.5.11
+ *
+ * NOTE: sta must be given when an individually-addressed QoS frame header
+ * is handled, for group-addressed and management frames it is not used
+ */
+void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata,
+				   struct sta_info *sta,
+				   struct ieee80211_hdr *hdr)
+{
+	enum nl80211_mesh_power_mode pm;
+	u8 *qc;
+
+	if (WARN_ON(is_unicast_ether_addr(hdr->addr1) &&
+		    ieee80211_is_data_qos(hdr->frame_control) &&
+		    !sta))
+		return;
+
+	if (is_unicast_ether_addr(hdr->addr1) &&
+	    ieee80211_is_data_qos(hdr->frame_control) &&
+	    sta->plink_state == NL80211_PLINK_ESTAB)
+		pm = sta->local_pm;
+	else
+		pm = sdata->u.mesh.nonpeer_pm;
+
+	if (pm == NL80211_MESH_POWER_ACTIVE)
+		hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_PM);
+	else
+		hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	qc = ieee80211_get_qos_ctl(hdr);
+
+	if ((is_unicast_ether_addr(hdr->addr1) &&
+	     pm == NL80211_MESH_POWER_DEEP_SLEEP) ||
+	    (is_multicast_ether_addr(hdr->addr1) &&
+	     sdata->u.mesh.ps_peers_deep_sleep > 0))
+		qc[1] |= (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8);
+	else
+		qc[1] &= ~(IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8);
+}
+
+/**
+ * ieee80211_mps_sta_status_update - update buffering status of neighbor STA
+ *
+ * @sta: mesh STA
+ *
+ * called after change of peering status or non-peer/peer-specific power mode
+ */
+void ieee80211_mps_sta_status_update(struct sta_info *sta)
+{
+	enum nl80211_mesh_power_mode pm;
+	bool do_buffer;
+
+	/*
+	 * use peer-specific power mode if peering is established and the
+	 * peer's power mode is known
+	 */
+	if (sta->plink_state == NL80211_PLINK_ESTAB &&
+	    sta->peer_pm != NL80211_MESH_POWER_UNKNOWN)
+		pm = sta->peer_pm;
+	else
+		pm = sta->nonpeer_pm;
+
+	do_buffer = (pm != NL80211_MESH_POWER_ACTIVE);
+
+	/* Don't let the same PS state be set twice */
+	if (test_sta_flag(sta, WLAN_STA_PS_STA) == do_buffer)
+		return;
+
+	if (do_buffer) {
+		set_sta_flag(sta, WLAN_STA_PS_STA);
+		atomic_inc(&sta->sdata->u.mesh.ps.num_sta_ps);
+		mps_dbg(sta->sdata, "start PS buffering frames towards %pM\n",
+			sta->sta.addr);
+	} else {
+		ieee80211_sta_ps_deliver_wakeup(sta);
+	}
+
+	/* clear the MPSP flags for non-peers or active STA */
+	if (sta->plink_state != NL80211_PLINK_ESTAB) {
+		clear_sta_flag(sta, WLAN_STA_MPSP_OWNER);
+		clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+	} else if (!do_buffer) {
+		clear_sta_flag(sta, WLAN_STA_MPSP_OWNER);
+	}
+}
+
+static void mps_set_sta_peer_pm(struct sta_info *sta,
+				struct ieee80211_hdr *hdr)
+{
+	enum nl80211_mesh_power_mode pm;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+
+	/*
+	 * Test Power Management field of frame control (PW) and
+	 * mesh power save level subfield of QoS control field (PSL)
+	 *
+	 * | PM | PSL| Mesh PM |
+	 * +----+----+---------+
+	 * | 0  |Rsrv|  Active |
+	 * | 1  | 0  |  Light  |
+	 * | 1  | 1  |  Deep   |
+	 */
+	if (ieee80211_has_pm(hdr->frame_control)) {
+		if (qc[1] & (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8))
+			pm = NL80211_MESH_POWER_DEEP_SLEEP;
+		else
+			pm = NL80211_MESH_POWER_LIGHT_SLEEP;
+	} else {
+		pm = NL80211_MESH_POWER_ACTIVE;
+	}
+
+	if (sta->peer_pm == pm)
+		return;
+
+	mps_dbg(sta->sdata, "STA %pM enters mode %d\n",
+		sta->sta.addr, pm);
+
+	sta->peer_pm = pm;
+
+	ieee80211_mps_sta_status_update(sta);
+}
+
+static void mps_set_sta_nonpeer_pm(struct sta_info *sta,
+				   struct ieee80211_hdr *hdr)
+{
+	enum nl80211_mesh_power_mode pm;
+
+	if (ieee80211_has_pm(hdr->frame_control))
+		pm = NL80211_MESH_POWER_DEEP_SLEEP;
+	else
+		pm = NL80211_MESH_POWER_ACTIVE;
+
+	if (sta->nonpeer_pm == pm)
+		return;
+
+	mps_dbg(sta->sdata, "STA %pM sets non-peer mode to %d\n",
+		sta->sta.addr, pm);
+
+	sta->nonpeer_pm = pm;
+
+	ieee80211_mps_sta_status_update(sta);
+}
+
+/**
+ * ieee80211_mps_rx_h_sta_process - frame receive handler for mesh powersave
+ *
+ * @sta: STA info that transmitted the frame
+ * @hdr: IEEE 802.11 (QoS) Header
+ */
+void ieee80211_mps_rx_h_sta_process(struct sta_info *sta,
+				    struct ieee80211_hdr *hdr)
+{
+	if (is_unicast_ether_addr(hdr->addr1) &&
+	    ieee80211_is_data_qos(hdr->frame_control)) {
+		/*
+		 * individually addressed QoS Data/Null frames contain
+		 * peer link-specific PS mode towards the local STA
+		 */
+		mps_set_sta_peer_pm(sta, hdr);
+
+		/* check for mesh Peer Service Period trigger frames */
+		ieee80211_mpsp_trigger_process(ieee80211_get_qos_ctl(hdr),
+					       sta, false, false);
+	} else {
+		/*
+		 * can only determine non-peer PS mode
+		 * (see IEEE802.11-2012 8.2.4.1.7)
+		 */
+		mps_set_sta_nonpeer_pm(sta, hdr);
+	}
+}
+
+
+/* mesh PS frame release */
+
+static void mpsp_trigger_send(struct sta_info *sta, bool rspi, bool eosp)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct sk_buff *skb;
+	struct ieee80211_hdr *nullfunc;
+	struct ieee80211_tx_info *info;
+	u8 *qc;
+
+	skb = mps_qos_null_get(sta);
+	if (!skb)
+		return;
+
+	nullfunc = (struct ieee80211_hdr *) skb->data;
+	if (!eosp)
+		nullfunc->frame_control |=
+				cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+	/*
+	 * | RSPI | EOSP |  MPSP triggering   |
+	 * +------+------+--------------------+
+	 * |  0   |  0   | local STA is owner |
+	 * |  0   |  1   | no MPSP (MPSP end) |
+	 * |  1   |  0   | both STA are owner |
+	 * |  1   |  1   | peer STA is owner  | see IEEE802.11-2012 13.14.9.2
+	 */
+	qc = ieee80211_get_qos_ctl(nullfunc);
+	if (rspi)
+		qc[1] |= (IEEE80211_QOS_CTL_RSPI >> 8);
+	if (eosp)
+		qc[0] |= IEEE80211_QOS_CTL_EOSP;
+
+	info = IEEE80211_SKB_CB(skb);
+
+	info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
+		       IEEE80211_TX_CTL_REQ_TX_STATUS;
+
+	mps_dbg(sdata, "sending MPSP trigger%s%s to %pM\n",
+		rspi ? " RSPI" : "", eosp ? " EOSP" : "", sta->sta.addr);
+
+	ieee80211_tx_skb(sdata, skb);
+}
+
+/**
+ * mpsp_qos_null_append - append QoS Null frame to MPSP skb queue if needed
+ *
+ * To properly end a mesh MPSP the last transmitted frame has to set the EOSP
+ * flag in the QoS Control field. In case the current tailing frame is not a
+ * QoS Data frame, append a QoS Null to carry the flag.
+ */
+static void mpsp_qos_null_append(struct sta_info *sta,
+				 struct sk_buff_head *frames)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct sk_buff *new_skb, *skb = skb_peek_tail(frames);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	struct ieee80211_tx_info *info;
+
+	if (ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	new_skb = mps_qos_null_get(sta);
+	if (!new_skb)
+		return;
+
+	mps_dbg(sdata, "appending QoS Null in MPSP towards %pM\n",
+		sta->sta.addr);
+	/*
+	 * This frame has to be transmitted last. Assign lowest priority to
+	 * make sure it cannot pass other frames when releasing multiple ACs.
+	 */
+	new_skb->priority = 1;
+	skb_set_queue_mapping(new_skb, IEEE80211_AC_BK);
+	ieee80211_set_qos_hdr(sdata, new_skb);
+
+	info = IEEE80211_SKB_CB(new_skb);
+	info->control.vif = &sdata->vif;
+	info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
+
+	__skb_queue_tail(frames, new_skb);
+}
+
+/**
+ * mps_frame_deliver - transmit frames during mesh powersave
+ *
+ * @sta: STA info to transmit to
+ * @n_frames: number of frames to transmit. -1 for all
+ */
+static void mps_frame_deliver(struct sta_info *sta, int n_frames)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+	int ac;
+	struct sk_buff_head frames;
+	struct sk_buff *skb;
+	bool more_data = false;
+
+	skb_queue_head_init(&frames);
+
+	/* collect frame(s) from buffers */
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+		while (n_frames != 0) {
+			skb = skb_dequeue(&sta->tx_filtered[ac]);
+			if (!skb) {
+				skb = skb_dequeue(
+					&sta->ps_tx_buf[ac]);
+				if (skb)
+					local->total_ps_buffered--;
+			}
+			if (!skb)
+				break;
+			n_frames--;
+			__skb_queue_tail(&frames, skb);
+		}
+
+		if (!skb_queue_empty(&sta->tx_filtered[ac]) ||
+		    !skb_queue_empty(&sta->ps_tx_buf[ac]))
+			more_data = true;
+	}
+
+	/* nothing to send? -> EOSP */
+	if (skb_queue_empty(&frames)) {
+		mpsp_trigger_send(sta, false, true);
+		return;
+	}
+
+	/* in a MPSP make sure the last skb is a QoS Data frame */
+	if (test_sta_flag(sta, WLAN_STA_MPSP_OWNER))
+		mpsp_qos_null_append(sta, &frames);
+
+	mps_dbg(sta->sdata, "sending %d frames to PS STA %pM\n",
+		skb_queue_len(&frames), sta->sta.addr);
+
+	/* prepare collected frames for transmission */
+	skb_queue_walk(&frames, skb) {
+		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+		struct ieee80211_hdr *hdr = (void *) skb->data;
+
+		/*
+		 * Tell TX path to send this frame even though the
+		 * STA may still remain is PS mode after this frame
+		 * exchange.
+		 */
+		info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
+
+		if (more_data || !skb_queue_is_last(&frames, skb))
+			hdr->frame_control |=
+				cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+		else
+			hdr->frame_control &=
+				cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
+
+		if (skb_queue_is_last(&frames, skb) &&
+		    ieee80211_is_data_qos(hdr->frame_control)) {
+			u8 *qoshdr = ieee80211_get_qos_ctl(hdr);
+
+			/* MPSP trigger frame ends service period */
+			*qoshdr |= IEEE80211_QOS_CTL_EOSP;
+			info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+		}
+	}
+
+	ieee80211_add_pending_skbs(local, &frames);
+	sta_info_recalc_tim(sta);
+}
+
+/**
+ * ieee80211_mpsp_trigger_process - track status of mesh Peer Service Periods
+ *
+ * @qc: QoS Control field
+ * @sta: peer to start a MPSP with
+ * @tx: frame was transmitted by the local STA
+ * @acked: frame has been transmitted successfully
+ *
+ * NOTE: active mode STA may only serve as MPSP owner
+ */
+void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta,
+				    bool tx, bool acked)
+{
+	u8 rspi = qc[1] & (IEEE80211_QOS_CTL_RSPI >> 8);
+	u8 eosp = qc[0] & IEEE80211_QOS_CTL_EOSP;
+
+	if (tx) {
+		if (rspi && acked)
+			set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+
+		if (eosp)
+			clear_sta_flag(sta, WLAN_STA_MPSP_OWNER);
+		else if (acked &&
+			 test_sta_flag(sta, WLAN_STA_PS_STA) &&
+			 !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER))
+			mps_frame_deliver(sta, -1);
+	} else {
+		if (eosp)
+			clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+		else if (sta->local_pm != NL80211_MESH_POWER_ACTIVE)
+			set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+
+		if (rspi && !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER))
+			mps_frame_deliver(sta, -1);
+	}
+}
+
+/**
+ * ieee80211_mps_frame_release - release buffered frames in response to beacon
+ *
+ * @sta: mesh STA
+ * @elems: beacon IEs
+ *
+ * For peers if we have individually-addressed frames buffered or the peer
+ * indicates buffered frames, send a corresponding MPSP trigger frame. Since
+ * we do not evaluate the awake window duration, QoS Nulls are used as MPSP
+ * trigger frames. If the neighbour STA is not a peer, only send single frames.
+ */
+void ieee80211_mps_frame_release(struct sta_info *sta,
+				 struct ieee802_11_elems *elems)
+{
+	int ac, buffer_local = 0;
+	bool has_buffered = false;
+
+	/* TIM map only for LLID <= IEEE80211_MAX_AID */
+	if (sta->plink_state == NL80211_PLINK_ESTAB)
+		has_buffered = ieee80211_check_tim(elems->tim, elems->tim_len,
+				le16_to_cpu(sta->llid) % IEEE80211_MAX_AID);
+
+	if (has_buffered)
+		mps_dbg(sta->sdata, "%pM indicates buffered frames\n",
+			sta->sta.addr);
+
+	/* only transmit to PS STA with announced, non-zero awake window */
+	if (test_sta_flag(sta, WLAN_STA_PS_STA) &&
+	    (!elems->awake_window || !le16_to_cpu(*elems->awake_window)))
+		return;
+
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
+		buffer_local += skb_queue_len(&sta->ps_tx_buf[ac]) +
+				skb_queue_len(&sta->tx_filtered[ac]);
+
+	if (!has_buffered && !buffer_local)
+		return;
+
+	if (sta->plink_state == NL80211_PLINK_ESTAB)
+		mpsp_trigger_send(sta, has_buffered, !buffer_local);
+	else
+		mps_frame_deliver(sta, 1);
+}
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index a19089565c4b..c98be0593756 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1452,6 +1452,10 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
 		}
 	}
 
+	/* mesh power save support */
+	if (ieee80211_vif_is_mesh(&rx->sdata->vif))
+		ieee80211_mps_rx_h_sta_process(sta, hdr);
+
 	/*
 	 * Drop (qos-)data::nullfunc frames silently, since they
 	 * are used only to control station power saving mode.
@@ -2090,7 +2094,10 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 	if (is_multicast_ether_addr(fwd_hdr->addr1)) {
 		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_mcast);
 		memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN);
+		/* update power mode indication when forwarding */
+		ieee80211_mps_set_frame_flags(sdata, NULL, fwd_hdr);
 	} else if (!mesh_nexthop_lookup(fwd_skb, sdata)) {
+		/* mesh power mode flags updated in mesh_nexthop_lookup */
 		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast);
 	} else {
 		/* unable to resolve next hop */
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 227233c3ff7f..47a0f0601768 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -120,6 +120,8 @@ static void cleanup_single_sta(struct sta_info *sta)
 		if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
 		    sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 			ps = &sdata->bss->ps;
+		else if (ieee80211_vif_is_mesh(&sdata->vif))
+			ps = &sdata->u.mesh.ps;
 		else
 			return;
 
@@ -587,6 +589,12 @@ void sta_info_recalc_tim(struct sta_info *sta)
 
 		ps = &sta->sdata->bss->ps;
 		id = sta->sta.aid;
+#ifdef CONFIG_MAC80211_MESH
+	} else if (ieee80211_vif_is_mesh(&sta->sdata->vif)) {
+		ps = &sta->sdata->u.mesh.ps;
+		/* TIM map only for PLID <= IEEE80211_MAX_AID */
+		id = le16_to_cpu(sta->plid) % IEEE80211_MAX_AID;
+#endif
 	} else {
 		return;
 	}
@@ -745,8 +753,9 @@ static bool sta_info_cleanup_expire_buffered(struct ieee80211_local *local,
 	bool have_buffered = false;
 	int ac;
 
-	/* This is only necessary for stations on BSS interfaces */
-	if (!sta->sdata->bss)
+	/* This is only necessary for stations on BSS/MBSS interfaces */
+	if (!sta->sdata->bss &&
+	    !ieee80211_vif_is_mesh(&sta->sdata->vif))
 		return false;
 
 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
@@ -934,6 +943,11 @@ void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
 		if (time_after(jiffies, sta->last_rx + exp_time)) {
 			sta_dbg(sta->sdata, "expiring inactive STA %pM\n",
 				sta->sta.addr);
+
+			if (ieee80211_vif_is_mesh(&sdata->vif) &&
+			    test_sta_flag(sta, WLAN_STA_PS_STA))
+				atomic_dec(&sdata->u.mesh.ps.num_sta_ps);
+
 			WARN_ON(__sta_info_destroy(sta));
 		}
 	}
@@ -992,6 +1006,8 @@ static void clear_sta_ps_flags(void *_sta)
 	if (sdata->vif.type == NL80211_IFTYPE_AP ||
 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		ps = &sdata->bss->ps;
+	else if (ieee80211_vif_is_mesh(&sdata->vif))
+		ps = &sdata->u.mesh.ps;
 	else
 		return;
 
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index af7d78aa5523..5a1deba2c645 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -56,6 +56,8 @@
  * @WLAN_STA_INSERTED: This station is inserted into the hash table.
  * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station.
  * @WLAN_STA_TOFFSET_KNOWN: toffset calculated for this station is valid.
+ * @WLAN_STA_MPSP_OWNER: local STA is owner of a mesh Peer Service Period.
+ * @WLAN_STA_MPSP_RECIPIENT: local STA is recipient of a MPSP.
  */
 enum ieee80211_sta_info_flags {
 	WLAN_STA_AUTH,
@@ -78,6 +80,8 @@ enum ieee80211_sta_info_flags {
 	WLAN_STA_INSERTED,
 	WLAN_STA_RATE_CONTROL,
 	WLAN_STA_TOFFSET_KNOWN,
+	WLAN_STA_MPSP_OWNER,
+	WLAN_STA_MPSP_RECIPIENT,
 };
 
 #define ADDBA_RESP_INTERVAL HZ
@@ -282,6 +286,9 @@ struct sta_ampdu_mlme {
  * @t_offset_setpoint: reference timing offset of this sta to be used when
  * 	calculating clockdrift
  * @ch_width: peer's channel width
+ * @local_pm: local link-specific power save mode
+ * @peer_pm: peer-specific power save mode towards local STA
+ * @nonpeer_pm: STA power save mode towards non-peer neighbors
  * @debugfs: debug filesystem info
  * @dead: set to true when sta is unlinked
  * @uploaded: set to true when sta is uploaded to the driver
@@ -379,6 +386,10 @@ struct sta_info {
 	s64 t_offset;
 	s64 t_offset_setpoint;
 	enum nl80211_chan_width ch_width;
+	/* mesh power save */
+	enum nl80211_mesh_power_mode local_pm;
+	enum nl80211_mesh_power_mode peer_pm;
+	enum nl80211_mesh_power_mode nonpeer_pm;
 #endif
 
 #ifdef CONFIG_MAC80211_DEBUGFS
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index d041de056b7f..43439203f4e4 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -472,6 +472,13 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 			return;
 		}
 
+		/* mesh Peer Service Period support */
+		if (ieee80211_vif_is_mesh(&sta->sdata->vif) &&
+		    ieee80211_is_data_qos(fc))
+			ieee80211_mpsp_trigger_process(
+					ieee80211_get_qos_ctl(hdr),
+					sta, true, acked);
+
 		if ((local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) &&
 		    (rates_idx != -1))
 			sta->last_tx_rate = info->status.rates[rates_idx];
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 7892b0a8873e..2ef0e19b06bb 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -329,6 +329,8 @@ static void purge_old_ps_buffers(struct ieee80211_local *local)
 
 		if (sdata->vif.type == NL80211_IFTYPE_AP)
 			ps = &sdata->u.ap.ps;
+		else if (ieee80211_vif_is_mesh(&sdata->vif))
+			ps = &sdata->u.mesh.ps;
 		else
 			continue;
 
@@ -372,18 +374,20 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
 	/*
 	 * broadcast/multicast frame
 	 *
-	 * If any of the associated stations is in power save mode,
+	 * If any of the associated/peer stations is in power save mode,
 	 * the frame is buffered to be sent after DTIM beacon frame.
 	 * This is done either by the hardware or us.
 	 */
 
-	/* powersaving STAs currently only in AP/VLAN mode */
+	/* powersaving STAs currently only in AP/VLAN/mesh mode */
 	if (tx->sdata->vif.type == NL80211_IFTYPE_AP ||
 	    tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
 		if (!tx->sdata->bss)
 			return TX_CONTINUE;
 
 		ps = &tx->sdata->bss->ps;
+	} else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) {
+		ps = &tx->sdata->u.mesh.ps;
 	} else {
 		return TX_CONTINUE;
 	}
@@ -1473,12 +1477,14 @@ void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 	hdr = (struct ieee80211_hdr *) skb->data;
 	info->control.vif = &sdata->vif;
 
-	if (ieee80211_vif_is_mesh(&sdata->vif) &&
-	    ieee80211_is_data(hdr->frame_control) &&
-	    !is_multicast_ether_addr(hdr->addr1) &&
-	    mesh_nexthop_resolve(skb, sdata)) {
-		/* skb queued: don't free */
-		return;
+	if (ieee80211_vif_is_mesh(&sdata->vif)) {
+		if (ieee80211_is_data(hdr->frame_control) &&
+		    is_unicast_ether_addr(hdr->addr1)) {
+			if (mesh_nexthop_resolve(skb, sdata))
+				return; /* skb queued: don't free */
+		} else {
+			ieee80211_mps_set_frame_flags(sdata, NULL, hdr);
+		}
 	}
 
 	ieee80211_set_qos_hdr(sdata, skb);
@@ -2445,12 +2451,14 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 				    2 + /* NULL SSID */
 				    2 + 8 + /* supported rates */
 				    2 + 3 + /* DS params */
+				    256 + /* TIM IE */
 				    2 + (IEEE80211_MAX_SUPP_RATES - 8) +
 				    2 + sizeof(struct ieee80211_ht_cap) +
 				    2 + sizeof(struct ieee80211_ht_operation) +
 				    2 + sdata->u.mesh.mesh_id_len +
 				    2 + sizeof(struct ieee80211_meshconf_ie) +
-				    sdata->u.mesh.ie_len);
+				    sdata->u.mesh.ie_len +
+				    2 + sizeof(__le16)); /* awake window */
 		if (!skb)
 			goto out;
 
@@ -2462,6 +2470,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 		eth_broadcast_addr(mgmt->da);
 		memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
 		memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
+		ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt);
 		mgmt->u.beacon.beacon_int =
 			cpu_to_le16(sdata->vif.bss_conf.beacon_int);
 		mgmt->u.beacon.capab_info |= cpu_to_le16(
@@ -2475,12 +2484,14 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 
 		if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
 		    mesh_add_ds_params_ie(skb, sdata) ||
+		    ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb) ||
 		    ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
 		    mesh_add_rsn_ie(skb, sdata) ||
 		    mesh_add_ht_cap_ie(skb, sdata) ||
 		    mesh_add_ht_oper_ie(skb, sdata) ||
 		    mesh_add_meshid_ie(skb, sdata) ||
 		    mesh_add_meshconf_ie(skb, sdata) ||
+		    mesh_add_awake_window_ie(skb, sdata) ||
 		    mesh_add_vendor_ies(skb, sdata)) {
 			pr_err("o11s: couldn't add ies!\n");
 			goto out;
@@ -2734,6 +2745,8 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw,
 			goto out;
 
 		ps = &sdata->u.ap.ps;
+	} else if (ieee80211_vif_is_mesh(&sdata->vif)) {
+		ps = &sdata->u.mesh.ps;
 	} else {
 		goto out;
 	}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 139ad9b66c39..6cb71a350edd 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -805,6 +805,10 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
 			elems->peering = pos;
 			elems->peering_len = elen;
 			break;
+		case WLAN_EID_MESH_AWAKE_WINDOW:
+			if (elen >= 2)
+				elems->awake_window = (void *)pos;
+			break;
 		case WLAN_EID_PREQ:
 			elems->preq = pos;
 			elems->preq_len = elen;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 906f00cd6d2f..afba19cb6f87 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -191,6 +191,15 @@ void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata,
 
 	/* qos header is 2 bytes */
 	*p++ = ack_policy | tid;
-	*p = ieee80211_vif_is_mesh(&sdata->vif) ?
-		(IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8) : 0;
+	if (ieee80211_vif_is_mesh(&sdata->vif)) {
+		/* preserve RSPI and Mesh PS Level bit */
+		*p &= ((IEEE80211_QOS_CTL_RSPI |
+			IEEE80211_QOS_CTL_MESH_PS_LEVEL) >> 8);
+
+		/* Nulls don't have a mesh header (frame body) */
+		if (!ieee80211_is_qos_nullfunc(hdr->frame_control))
+			*p |= (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8);
+	} else {
+		*p = 0;
+	}
 }