diff options
22 files changed, 184 insertions, 168 deletions
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index d4e41ef86aa5..a991aeb56091 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -653,11 +653,11 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 57, @@ -816,7 +816,7 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430); sdp3430_display_init(); enable_board_wakeup_source(); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 62645640f5e4..03fd8aca3cc8 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -54,11 +54,11 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 126, @@ -211,7 +211,7 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); enable_board_wakeup_source(); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 9cf8e333255f..0e1609d3fa85 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -251,10 +251,10 @@ static void __init omap_4430sdp_init_irq(void) gic_init_irq(); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = false, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = -EINVAL, @@ -584,7 +584,7 @@ static void __init omap_4430sdp_init(void) else gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 71acb5ab281c..1b825a00c5b0 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -59,10 +59,10 @@ static void __init am3517_crane_init_irq(void) omap_init_irq(); } -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = GPIO_USB_NRESET, @@ -103,7 +103,7 @@ static void __init am3517_crane_init(void) return; } - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 10d60b7743cf..f5bc1c6ccf5e 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -430,15 +430,15 @@ static __init void am3517_evm_musb_init(void) usb_musb_init(&musb_board_data); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, #else - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, #endif - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 57, @@ -502,7 +502,7 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ am3517_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index dac141610666..c79aa9be72f7 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -605,10 +605,10 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, @@ -810,7 +810,7 @@ static void __init cm_t35_init(void) cm_t35_init_display(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 8f9a64d650ee..8288a0b9159e 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -167,10 +167,10 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) -static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = HSUSB1_RESET_GPIO, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 9a2a31e011ce..e0131dda5792 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -620,11 +620,11 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -803,7 +803,7 @@ static void __init devkit8000_init(void) devkit8000_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); devkit8000_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3be85a1f55f4..a9d7d1dc63ab 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -627,10 +627,10 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, @@ -699,7 +699,7 @@ static void __init igep2_init(void) platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); igep2_flash_init(); igep2_leds_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 4dc62a9b9cb2..1b441eafdba7 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -408,10 +408,10 @@ static void __init igep3_wifi_bt_init(void) void __init igep3_wifi_bt_init(void) {} #endif -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -435,7 +435,7 @@ static void __init igep3_init(void) platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); igep3_flash_init(); igep3_leds_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814ab5656..b84a6418ec1e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -586,11 +586,11 @@ static void __init omap3beagle_flash_init(void) } } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -625,7 +625,7 @@ static void __init omap3_beagle_init(void) gpio_direction_output(170, true); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 323c3809ce39..ed5e4118147d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -638,11 +638,11 @@ static struct platform_device *omap3_evm_devices[] __initdata = { &omap3_evm_dss_device, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { +static struct usbhs_omap_board_data usbhs_bdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, /* PHY reset GPIO will be runtime programmed based on EVM version */ @@ -700,7 +700,7 @@ static void __init omap3_evm_init(void) /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - ehci_pdata.reset_gpio_port[1] = 21; + usbhs_bdata.reset_gpio_port[1] = 21; /* EVM REV >= E can supply 500mA with EXTVBUS programming */ musb_board_data.power = 500; @@ -708,10 +708,10 @@ static void __init omap3_evm_init(void) } else { /* setup EHCI phy reset on MDC */ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - ehci_pdata.reset_gpio_port[1] = 135; + usbhs_bdata.reset_gpio_port[1] = 135; } usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); ads7846_dev_init(); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 0b34beded11f..241e632a4662 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -681,11 +681,11 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_vwlan_device, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 16, @@ -716,7 +716,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); usb_musb_init(&musb_board_data); gpmc_nand_init(&pandora_nand_data); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 2a2dad447e86..eaad924b6244 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -608,10 +608,10 @@ static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -649,7 +649,7 @@ static void __init omap3_stalker_init(void) omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); ads7846_dev_init(); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index db1f74fe6c4f..4e3a1ae2ac96 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -468,11 +468,11 @@ static void __init omap3touchbook_flash_init(void) } } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -527,7 +527,7 @@ static void __init omap3_touchbook_init(void) ARRAY_SIZE(omap3_ads7846_spi_board_info)); omap3_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); omap3touchbook_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 77748f813667..b88c1909434a 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -83,10 +83,10 @@ static void __init omap4_panda_init_irq(void) gic_init_irq(); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = false, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = -EINVAL, @@ -128,7 +128,7 @@ static void __init omap4_ehci_init(void) gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index cb26e5d8268d..f78b74c369df 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -423,10 +423,10 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -454,7 +454,7 @@ static void __init overo_init(void) omap_serial_init(); overo_flash_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); overo_ads7846_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index e26754c24ee8..19b99128df76 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -106,10 +106,10 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO, @@ -123,7 +123,7 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } board_nand_init(zoom_nand_partitions, diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 45f9b80b6d20..b04ce6f8f013 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -64,10 +64,10 @@ static struct platform_device ehci_device = { /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST */ -static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); @@ -81,7 +81,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb1_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb1_tll_clk", @@ -107,14 +107,14 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb1_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); @@ -136,7 +136,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb2_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb2_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb2_tll_clk", @@ -162,17 +162,17 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb2_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } switch (port_mode[2]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb3_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb3_tll_clk", @@ -198,7 +198,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb3_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -207,10 +207,10 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) return; } -static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("usbb1_ulpiphy_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("usbb1_ulpiphy_clk", @@ -236,7 +236,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb1_ulpiphy_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("usbb1_ulpitll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("usbb1_ulpitll_clk", @@ -262,12 +262,12 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb1_ulpitll_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: default: break; } switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("usbb2_ulpiphy_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("usbb2_ulpiphy_clk", @@ -293,7 +293,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb2_ulpiphy_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("usbb2_ulpitll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("usbb2_ulpitll_clk", @@ -319,13 +319,13 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb2_ulpitll_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: default: break; } } -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) +void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) { platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); @@ -363,7 +363,7 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) #else -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) +void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) { } @@ -411,7 +411,7 @@ static struct platform_device ohci_device = { .resource = ohci_resources, }; -static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) +static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: @@ -439,7 +439,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm1_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -470,7 +470,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm2_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -501,14 +501,14 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm3_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } } -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) { platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); @@ -524,7 +524,7 @@ void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) #else -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) { } diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index f888e0e57dc8..32dfe08023a4 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -7,15 +7,12 @@ #include <plat/board.h> #define OMAP3_HS_USB_PORTS 3 -enum ehci_hcd_omap_mode { - EHCI_HCD_OMAP_MODE_UNKNOWN, - EHCI_HCD_OMAP_MODE_PHY, - EHCI_HCD_OMAP_MODE_TLL, - EHCI_HCD_OMAP_MODE_HSIC, -}; -enum ohci_omap3_port_mode { - OMAP_OHCI_PORT_MODE_UNUSED, +enum usbhs_omap_port_mode { + OMAP_USBHS_PORT_MODE_UNUSED, + OMAP_EHCI_PORT_MODE_PHY, + OMAP_EHCI_PORT_MODE_TLL, + OMAP_EHCI_PORT_MODE_HSIC, OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, @@ -25,24 +22,45 @@ enum ohci_omap3_port_mode { OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM }; -struct ehci_hcd_omap_platform_data { - enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; - unsigned phy_reset:1; +struct usbhs_omap_board_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; /* have to be valid if phy_reset is true and portx is in phy mode */ int reset_gpio_port[OMAP3_HS_USB_PORTS]; + + /* Set this to true for ES2.x silicon */ + unsigned es2_compatibility:1; + + unsigned phy_reset:1; + + /* + * Regulators for USB PHYs. + * Each PHY can have a separate regulator. + */ + struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; -struct ohci_hcd_omap_platform_data { - enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS]; +struct ehci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + struct regulator *regulator[OMAP3_HS_USB_PORTS]; + unsigned phy_reset:1; +}; - /* Set this to true for ES2.x silicon */ +struct ohci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; unsigned es2_compatibility:1; }; +struct usbhs_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + + struct ehci_hcd_omap_platform_data *ehci_data; + struct ohci_hcd_omap_platform_data *ohci_data; +}; /*-------------------------------------------------------------------------*/ #define OMAP1_OTG_BASE 0xfffb0400 @@ -80,19 +98,17 @@ enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; extern void usb_musb_init(struct omap_musb_board_data *board_data); -extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata); +extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata); -extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata); +extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata); extern int omap4430_phy_power(struct device *dev, int ID, int on); extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); - #endif - /* * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 15277213f928..18df6c6a5803 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -155,9 +155,9 @@ #define is_omap_ehci_rev1(x) (x->omap_ehci_rev == OMAP_EHCI_REV1) #define is_omap_ehci_rev2(x) (x->omap_ehci_rev == OMAP_EHCI_REV2) -#define is_ehci_phy_mode(x) (x == EHCI_HCD_OMAP_MODE_PHY) -#define is_ehci_tll_mode(x) (x == EHCI_HCD_OMAP_MODE_TLL) -#define is_ehci_hsic_mode(x) (x == EHCI_HCD_OMAP_MODE_HSIC) +#define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY) +#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) +#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC) /*-------------------------------------------------------------------------*/ @@ -220,7 +220,7 @@ struct ehci_hcd_omap { u32 omap_ehci_rev; /* desired phy_mode: TLL, PHY */ - enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; void __iomem *uhh_base; void __iomem *tll_base; @@ -389,7 +389,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) */ if (is_omap_ehci_rev2(omap)) { switch (omap->port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap->xclk60mhsp1_ck = clk_get(omap->dev, "xclk60mhsp1_ck"); if (IS_ERR(omap->xclk60mhsp1_ck)) { @@ -413,7 +413,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) "Unable to set P1 f-clock\n"); } break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap->xclk60mhsp1_ck = clk_get(omap->dev, "init_60m_fclk"); if (IS_ERR(omap->xclk60mhsp1_ck)) { @@ -463,7 +463,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) break; } switch (omap->port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap->xclk60mhsp2_ck = clk_get(omap->dev, "xclk60mhsp2_ck"); if (IS_ERR(omap->xclk60mhsp2_ck)) { @@ -487,7 +487,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) "Unable to set P2 f-clock\n"); } break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap->xclk60mhsp2_ck = clk_get(omap->dev, "init_60m_fclk"); if (IS_ERR(omap->xclk60mhsp2_ck)) { @@ -591,11 +591,11 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; if (is_omap_ehci_rev1(omap)) { - if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN) + if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN) + if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN) + if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; /* Bypass the TLL module for PHY mode operation */ @@ -656,15 +656,15 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04, EHCI_INSNREG04_DISABLE_UNSUSPEND); - if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || - (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || - (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { + if ((omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL) || + (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL) || + (omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL)) { - if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) + if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL) tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK; - if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) + if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL) tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK; - if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL) + if (omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL) tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK; /* Enable UTMI mode for required TLL channels */ @@ -686,9 +686,9 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) } /* Soft reset the PHY using PHY reset command over ULPI */ - if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) + if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY) omap_ehci_soft_phy_reset(omap, 0); - if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) + if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY) omap_ehci_soft_phy_reset(omap, 1); return 0; @@ -903,7 +903,7 @@ static const struct hc_driver ehci_omap_hc_driver; */ static int ehci_hcd_omap_probe(struct platform_device *pdev) { - struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data; + struct usbhs_omap_board_data *pdata = pdev->dev.platform_data; struct ehci_hcd_omap *omap; struct resource *res; struct usb_hcd *hcd; @@ -981,7 +981,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* get ehci regulator and enable */ for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) { + if (omap->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) { omap->regulator[i] = NULL; continue; } diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index 32f56bbec214..3f9db87fe525 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -141,7 +141,7 @@ struct ohci_hcd_omap3 { struct clk *usbtll_ick; /* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */ - enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS]; + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; void __iomem *uhh_base; void __iomem *tll_base; void __iomem *ohci_base; @@ -206,10 +206,10 @@ static int ohci_omap3_start(struct usb_hcd *hcd) * convert the port-mode enum to a value we can use in the FSLSMODE * field of USBTLL_CHANNEL_CONF */ -static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode) +static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) { switch (mode) { - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: return 0x0; @@ -266,7 +266,7 @@ static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap) for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { /* Enable only those channels that are actually used */ - if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED) + if (omap->port_mode[i] == OMAP_USBHS_PORT_MODE_UNUSED) continue; reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); @@ -382,11 +382,11 @@ static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) * * For now, turn off all the Pi_CONNECT_STATUS bits * - if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) + if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) + if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) + if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; */ reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; @@ -403,17 +403,17 @@ static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; } else { dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); - if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) + if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; else reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) + if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; else reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) + if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; else reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; @@ -580,7 +580,7 @@ static const struct hc_driver ohci_omap3_hc_driver = { */ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) { - struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data; + struct usbhs_omap_board_data *pdata = pdev->dev.platform_data; struct ohci_hcd_omap3 *omap; struct resource *res; struct usb_hcd *hcd; |