ALSA: usb-audio: Add quirk to enable Avid Mbox 3 support

Add support for Avid Mbox3 USB audio interface at 48kHz

Signed-off-by: Conner Knox <connerknoxpublic@gmail.com>
Link: https://lore.kernel.org/r/20220818201433.16360-1-mbarriolinares@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 302 insertions, 0 deletions

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 168fd802d70b..1b05b0220fad 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1020,6 +1020,304 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev)
 	return 0;
 }
 
+static void mbox3_setup_48_24_magic(struct usb_device *dev)
+{
+	/* The Mbox 3 is "little endian" */
+	/* max volume is: 0x0000. */
+	/* min volume is: 0x0080 (shown in little endian form) */
+
+
+	/* Load 48000Hz rate into buffer */
+	u8 com_buff[4] = {0x80, 0xbb, 0x00, 0x00};
+
+	/* Set 48000Hz sample rate */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x01, 0x21, 0x0100, 0x0001, &com_buff, 4);  //Is this really needed?
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x01, 0x21, 0x0100, 0x8101, &com_buff, 4);
+
+	/* Deactivate Tuner */
+	/* on  = 0x01*/
+	/* off = 0x00*/
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+		0x01, 0x21, 0x0003, 0x2001, &com_buff, 1);
+
+	/* Set clock source to Internal (as opposed to S/PDIF) */
+	com_buff[0] = 0x01;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0100, 0x8001, &com_buff, 1);
+
+	/* Mute the hardware loopbacks to start the device in a known state. */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue input 1 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0110, 0x4001, &com_buff, 2);
+	/* Analogue input 1 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0111, 0x4001, &com_buff, 2);
+	/* Analogue input 2 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0114, 0x4001, &com_buff, 2);
+	/* Analogue input 2 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0115, 0x4001, &com_buff, 2);
+	/* Analogue input 3 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0118, 0x4001, &com_buff, 2);
+	/* Analogue input 3 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0119, 0x4001, &com_buff, 2);
+	/* Analogue input 4 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011c, 0x4001, &com_buff, 2);
+	/* Analogue input 4 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011d, 0x4001, &com_buff, 2);
+
+	/* Set software sends to output */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	/* Analogue software return 1 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0100, 0x4001, &com_buff, 2);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue software return 1 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0101, 0x4001, &com_buff, 2);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue software return 2 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0104, 0x4001, &com_buff, 2);
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	/* Analogue software return 2 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0105, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue software return 3 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0108, 0x4001, &com_buff, 2);
+	/* Analogue software return 3 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0109, 0x4001, &com_buff, 2);
+	/* Analogue software return 4 left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010c, 0x4001, &com_buff, 2);
+	/* Analogue software return 4 right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010d, 0x4001, &com_buff, 2);
+
+	/* Return to muting sends */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* Analogue fx return left channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0120, 0x4001, &com_buff, 2);
+	/* Analogue fx return right channel: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0121, 0x4001, &com_buff, 2);
+
+	/* Analogue software input 1 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0100, 0x4201, &com_buff, 2);
+	/* Analogue software input 2 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0101, 0x4201, &com_buff, 2);
+	/* Analogue software input 3 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0102, 0x4201, &com_buff, 2);
+	/* Analogue software input 4 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0103, 0x4201, &com_buff, 2);
+	/* Analogue input 1 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0104, 0x4201, &com_buff, 2);
+	/* Analogue input 2 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0105, 0x4201, &com_buff, 2);
+	/* Analogue input 3 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0106, 0x4201, &com_buff, 2);
+	/* Analogue input 4 fx send: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0107, 0x4201, &com_buff, 2);
+
+	/* Toggle allowing host control */
+	com_buff[0] = 0x02;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0000, 0x2001, &com_buff, 1);
+
+	/* Do not dim fx returns */
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0002, 0x2001, &com_buff, 1);
+
+	/* Do not set fx returns to mono */
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0001, 0x2001, &com_buff, 1);
+
+	/* Mute the S/PDIF hardware loopback
+	 * same odd volume logic here as above
+	 */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* S/PDIF hardware input 1 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0112, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 1 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0113, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 2 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0116, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 2 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0117, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 3 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011a, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 3 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011b, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 4 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011e, 0x4001, &com_buff, 2);
+	/* S/PDIF hardware input 4 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x011f, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 1 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0102, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 1 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0103, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 2 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0106, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 2 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0107, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	/* S/PDIF software return 3 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010a, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* S/PDIF software return 3 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010b, 0x4001, &com_buff, 2);
+	/* S/PDIF software return 4 left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010e, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	/* S/PDIF software return 4 right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x010f, 0x4001, &com_buff, 2);
+
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x80;
+	/* S/PDIF fx returns left channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0122, 0x4001, &com_buff, 2);
+	/* S/PDIF fx returns right channel */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0123, 0x4001, &com_buff, 2);
+
+	/* Set the dropdown "Effect" to the first option */
+	/* Room1  = 0x00 */
+	/* Room2  = 0x01 */
+	/* Room3  = 0x02 */
+	/* Hall 1 = 0x03 */
+	/* Hall 2 = 0x04 */
+	/* Plate  = 0x05 */
+	/* Delay  = 0x06 */
+	/* Echo   = 0x07 */
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0200, 0x4301, &com_buff, 1);	/* max is 0xff */
+	/* min is 0x00 */
+
+
+	/* Set the effect duration to 0 */
+	/* max is 0xffff */
+	/* min is 0x0000 */
+	com_buff[0] = 0x00;
+	com_buff[1] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0400, 0x4301, &com_buff, 2);
+
+	/* Set the effect volume and feedback to 0 */
+	/* max is 0xff */
+	/* min is 0x00 */
+	com_buff[0] = 0x00;
+	/* feedback: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0500, 0x4301, &com_buff, 1);
+	/* volume: */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			1, 0x21, 0x0300, 0x4301, &com_buff, 1);
+
+	/* Set soft button hold duration */
+	/* 0x03 = 250ms */
+	/* 0x05 = 500ms DEFAULT */
+	/* 0x08 = 750ms */
+	/* 0x0a = 1sec */
+	com_buff[0] = 0x05;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0005, 0x2001, &com_buff, 1);
+
+	/* Use dim LEDs for button of state */
+	com_buff[0] = 0x00;
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			3, 0x21, 0x0004, 0x2001, &com_buff, 1);
+}
+
+#define MBOX3_DESCRIPTOR_SIZE	464
+
+static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
+{
+	struct usb_host_config *config = dev->actconfig;
+	int err;
+	int descriptor_size;
+
+	descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
+
+	if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) {
+		dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size);
+		return -ENODEV;
+	}
+
+	dev_dbg(&dev->dev, "device initialised!\n");
+
+	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
+		&dev->descriptor, sizeof(dev->descriptor));
+	config = dev->actconfig;
+	if (err < 0)
+		dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+
+	err = usb_reset_configuration(dev);
+	if (err < 0)
+		dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
+	dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n",
+		le16_to_cpu(get_cfg_desc(config)->wTotalLength));
+
+	mbox3_setup_48_24_magic(dev);
+	dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz");
+
+	return 0; /* Successful boot */
+}
 
 #define MICROBOOK_BUF_SIZE 128
 
@@ -1324,6 +1622,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
 	case USB_ID(0x0dba, 0x3000):
 		/* Digidesign Mbox 2 */
 		return snd_usb_mbox2_boot_quirk(dev);
+	case USB_ID(0x0dba, 0x5000):
+		/* Digidesign Mbox 3 */
+		return snd_usb_mbox3_boot_quirk(dev);
+
 
 	case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */
 	case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */