ALSA: echoaudio: remove all snd_printk

removed all references of snd_printk with the standard dev_* macro.

[a few places degraded to dev_dbg(), too -- tiwai]

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 20 insertions, 17 deletions

diff --git a/sound/pci/echoaudio/layla20_dsp.c b/sound/pci/echoaudio/layla20_dsp.c
index 53ce94605044..7f0f6ea08ca7 100644
--- a/sound/pci/echoaudio/layla20_dsp.c
+++ b/sound/pci/echoaudio/layla20_dsp.c
@@ -40,12 +40,13 @@ static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
 {
 	int err;
 
-	DE_INIT(("init_hw() - Layla20\n"));
+	dev_dbg(chip->card->dev, "init_hw() - Layla20\n");
 	if (snd_BUG_ON((subdevice_id & 0xfff0) != LAYLA20))
 		return -ENODEV;
 
 	if ((err = init_dsp_comm_page(chip))) {
-		DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
 		return err;
 	}
 
@@ -64,7 +65,7 @@ static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
 		return err;
 	chip->bad_board = FALSE;
 
-	DE_INIT(("init_hw done\n"));
+	dev_dbg(chip->card->dev, "init_hw done\n");
 	return err;
 }
 
@@ -121,7 +122,8 @@ static int check_asic_status(struct echoaudio *chip)
 		/* The DSP will return a value to indicate whether or not
 		   the ASIC is currently loaded */
 		if (read_dsp(chip, &asic_status) < 0) {
-			DE_ACT(("check_asic_status: failed on read_dsp\n"));
+			dev_err(chip->card->dev,
+				"check_asic_status: failed on read_dsp\n");
 			return -EIO;
 		}
 
@@ -164,8 +166,8 @@ static int set_sample_rate(struct echoaudio *chip, u32 rate)
 	/* Only set the clock for internal mode. Do not return failure,
 	   simply treat it as a non-event. */
 	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
-		DE_ACT(("set_sample_rate: Cannot set sample rate - "
-			"clock not set to CLK_CLOCKININTERNAL\n"));
+		dev_warn(chip->card->dev,
+			 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n");
 		chip->comm_page->sample_rate = cpu_to_le32(rate);
 		chip->sample_rate = rate;
 		return 0;
@@ -174,7 +176,7 @@ static int set_sample_rate(struct echoaudio *chip, u32 rate)
 	if (wait_handshake(chip))
 		return -EIO;
 
-	DE_ACT(("set_sample_rate(%d)\n", rate));
+	dev_dbg(chip->card->dev, "set_sample_rate(%d)\n", rate);
 	chip->sample_rate = rate;
 	chip->comm_page->sample_rate = cpu_to_le32(rate);
 	clear_handshake(chip);
@@ -188,29 +190,30 @@ static int set_input_clock(struct echoaudio *chip, u16 clock_source)
 	u16 clock;
 	u32 rate;
 
-	DE_ACT(("set_input_clock:\n"));
+	dev_dbg(chip->card->dev, "set_input_clock:\n");
 	rate = 0;
 	switch (clock_source) {
 	case ECHO_CLOCK_INTERNAL:
-		DE_ACT(("Set Layla20 clock to INTERNAL\n"));
+		dev_dbg(chip->card->dev, "Set Layla20 clock to INTERNAL\n");
 		rate = chip->sample_rate;
 		clock = LAYLA20_CLOCK_INTERNAL;
 		break;
 	case ECHO_CLOCK_SPDIF:
-		DE_ACT(("Set Layla20 clock to SPDIF\n"));
+		dev_dbg(chip->card->dev, "Set Layla20 clock to SPDIF\n");
 		clock = LAYLA20_CLOCK_SPDIF;
 		break;
 	case ECHO_CLOCK_WORD:
-		DE_ACT(("Set Layla20 clock to WORD\n"));
+		dev_dbg(chip->card->dev, "Set Layla20 clock to WORD\n");
 		clock = LAYLA20_CLOCK_WORD;
 		break;
 	case ECHO_CLOCK_SUPER:
-		DE_ACT(("Set Layla20 clock to SUPER\n"));
+		dev_dbg(chip->card->dev, "Set Layla20 clock to SUPER\n");
 		clock = LAYLA20_CLOCK_SUPER;
 		break;
 	default:
-		DE_ACT(("Input clock 0x%x not supported for Layla24\n",
-			clock_source));
+		dev_err(chip->card->dev,
+			"Input clock 0x%x not supported for Layla24\n",
+			clock_source);
 		return -EINVAL;
 	}
 	chip->input_clock = clock_source;
@@ -229,7 +232,7 @@ static int set_input_clock(struct echoaudio *chip, u16 clock_source)
 
 static int set_output_clock(struct echoaudio *chip, u16 clock)
 {
-	DE_ACT(("set_output_clock: %d\n", clock));
+	dev_dbg(chip->card->dev, "set_output_clock: %d\n", clock);
 	switch (clock) {
 	case ECHO_CLOCK_SUPER:
 		clock = LAYLA20_OUTPUT_CLOCK_SUPER;
@@ -238,7 +241,7 @@ static int set_output_clock(struct echoaudio *chip, u16 clock)
 		clock = LAYLA20_OUTPUT_CLOCK_WORD;
 		break;
 	default:
-		DE_ACT(("set_output_clock wrong clock\n"));
+		dev_err(chip->card->dev, "set_output_clock wrong clock\n");
 		return -EINVAL;
 	}
 
@@ -283,7 +286,7 @@ static int update_flags(struct echoaudio *chip)
 
 static int set_professional_spdif(struct echoaudio *chip, char prof)
 {
-	DE_ACT(("set_professional_spdif %d\n", prof));
+	dev_dbg(chip->card->dev, "set_professional_spdif %d\n", prof);
 	if (prof)
 		chip->comm_page->flags |=
 			cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);