Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

3 files changed, 77 insertions, 0 deletions

diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index eb6c366adfba..9c2e4f82381e 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -13,6 +13,7 @@
 #define MUX_MODE5	5
 #define MUX_MODE6	6
 #define MUX_MODE7	7
+#define MUX_MODE8	8
 
 #define PULL_DISABLE		(1 << 16)
 #define PULL_UP			(1 << 17)
diff --git a/include/dt-bindings/reset-controller/stih415-resets.h b/include/dt-bindings/reset-controller/stih415-resets.h
new file mode 100644
index 000000000000..c2f8a66913c5
--- /dev/null
+++ b/include/dt-bindings/reset-controller/stih415-resets.h
@@ -0,0 +1,26 @@
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH415 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH415
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH415
+
+#define STIH415_EMISS_POWERDOWN		0
+#define STIH415_NAND_POWERDOWN		1
+#define STIH415_KEYSCAN_POWERDOWN	2
+#define STIH415_USB0_POWERDOWN		3
+#define STIH415_USB1_POWERDOWN		4
+#define STIH415_USB2_POWERDOWN		5
+#define STIH415_SATA0_POWERDOWN		6
+#define STIH415_SATA1_POWERDOWN		7
+#define STIH415_PCIE_POWERDOWN		8
+
+#define STIH415_ETH0_SOFTRESET		0
+#define STIH415_ETH1_SOFTRESET		1
+#define STIH415_IRB_SOFTRESET		2
+#define STIH415_USB0_SOFTRESET		3
+#define STIH415_USB1_SOFTRESET		4
+#define STIH415_USB2_SOFTRESET		5
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */
diff --git a/include/dt-bindings/reset-controller/stih416-resets.h b/include/dt-bindings/reset-controller/stih416-resets.h
new file mode 100644
index 000000000000..2127743f23e3
--- /dev/null
+++ b/include/dt-bindings/reset-controller/stih416-resets.h
@@ -0,0 +1,50 @@
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH416 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH416
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH416
+
+#define STIH416_EMISS_POWERDOWN		0
+#define STIH416_NAND_POWERDOWN		1
+#define STIH416_KEYSCAN_POWERDOWN	2
+#define STIH416_USB0_POWERDOWN		3
+#define STIH416_USB1_POWERDOWN		4
+#define STIH416_USB2_POWERDOWN		5
+#define STIH416_USB3_POWERDOWN		6
+#define STIH416_SATA0_POWERDOWN		7
+#define STIH416_SATA1_POWERDOWN		8
+#define STIH416_PCIE0_POWERDOWN		9
+#define STIH416_PCIE1_POWERDOWN		10
+
+#define STIH416_ETH0_SOFTRESET		0
+#define STIH416_ETH1_SOFTRESET		1
+#define STIH416_IRB_SOFTRESET		2
+#define STIH416_USB0_SOFTRESET		3
+#define STIH416_USB1_SOFTRESET		4
+#define STIH416_USB2_SOFTRESET		5
+#define STIH416_USB3_SOFTRESET		6
+#define STIH416_SATA0_SOFTRESET		7
+#define STIH416_SATA1_SOFTRESET		8
+#define STIH416_PCIE0_SOFTRESET		9
+#define STIH416_PCIE1_SOFTRESET		10
+#define STIH416_AUD_DAC_SOFTRESET	11
+#define STIH416_HDTVOUT_SOFTRESET	12
+#define STIH416_VTAC_M_RX_SOFTRESET	13
+#define STIH416_VTAC_A_RX_SOFTRESET	14
+#define STIH416_SYNC_HD_SOFTRESET	15
+#define STIH416_SYNC_SD_SOFTRESET	16
+#define STIH416_BLITTER_SOFTRESET	17
+#define STIH416_GPU_SOFTRESET		18
+#define STIH416_VTAC_M_TX_SOFTRESET	19
+#define STIH416_VTAC_A_TX_SOFTRESET	20
+#define STIH416_VTG_AUX_SOFTRESET	21
+#define STIH416_JPEG_DEC_SOFTRESET	22
+#define STIH416_HVA_SOFTRESET		23
+#define STIH416_COMPO_M_SOFTRESET	24
+#define STIH416_COMPO_A_SOFTRESET	25
+#define STIH416_VP8_DEC_SOFTRESET	26
+#define STIH416_VTG_MAIN_SOFTRESET	27
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH416 */