Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2022-10-05 11:24:12 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2022-10-05 11:24:12 -0700
commit: 7e6739b9336e61fe23ca4e2c8d1fda8f19f979bf (patch)
tree: da3dc30b7ba682edbb7392028e20dcce194b958b /drivers/video/fbdev
parent: a47e60729d9624e931f988709ab76e043e2ee8b9 (diff)
parent: 65898687cf7392c372ea8d04a88617e2cb794465 (diff)
43 files changed, 720 insertions, 734 deletions
diff --git a/drivers/video/fbdev/arkfb.c b/drivers/video/fbdev/arkfb.c
index a2a381631628..a317d9fe1d67 100644
--- a/drivers/video/fbdev/arkfb.c
+++ b/drivers/video/fbdev/arkfb.c
@@ -11,6 +11,7 @@
  *  Code is based on s3fb
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -956,6 +957,10 @@ static int ark_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	int rc;
 	u8 regval;
 
+	rc = aperture_remove_conflicting_pci_devices(dev, "arkfb");
+	if (rc < 0)
+		return rc;
+
 	/* Ignore secondary VGA device because there is no VGA arbitration */
 	if (! svga_primary_device(dev)) {
 		dev_info(&(dev->dev), "ignoring secondary device\n");
diff --git a/drivers/video/fbdev/asiliantfb.c b/drivers/video/fbdev/asiliantfb.c
index f8ef62542f7f..3818437a8f69 100644
--- a/drivers/video/fbdev/asiliantfb.c
+++ b/drivers/video/fbdev/asiliantfb.c
@@ -29,6 +29,7 @@
  *  more details.
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -545,6 +546,10 @@ static int asiliantfb_pci_init(struct pci_dev *dp,
 	struct fb_info *p;
 	int err;
 
+	err = aperture_remove_conflicting_pci_devices(dp, "asiliantfb");
+	if (err)
+		return err;
+
 	if ((dp->resource[0].flags & IORESOURCE_MEM) == 0)
 		return -ENODEV;
 	addr = pci_resource_start(dp, 0);
diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c
index b26c81233b6b..57e398fe7a81 100644
--- a/drivers/video/fbdev/aty/aty128fb.c
+++ b/drivers/video/fbdev/aty/aty128fb.c
@@ -23,7 +23,7 @@
  *			- Convert to new framebuffer API,
  *			  fix colormap setting at 16 bits/pixel (565)
  *
- *		  Paul Mundt 
+ *		  Paul Mundt
  *		  	- PCI hotplug
  *
  *		  Jon Smirl <jonsmirl@yahoo.com>
@@ -47,6 +47,7 @@
  */
 
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -520,13 +521,13 @@ static const struct fb_ops aty128fb_ops = {
      *	- endian conversions may possibly be avoided by
      *    using the other register aperture. TODO.
      */
-static inline u32 _aty_ld_le32(volatile unsigned int regindex, 
+static inline u32 _aty_ld_le32(volatile unsigned int regindex,
 			       const struct aty128fb_par *par)
 {
 	return readl (par->regbase + regindex);
 }
 
-static inline void _aty_st_le32(volatile unsigned int regindex, u32 val, 
+static inline void _aty_st_le32(volatile unsigned int regindex, u32 val,
 				const struct aty128fb_par *par)
 {
 	writel (val, par->regbase + regindex);
@@ -559,12 +560,12 @@ static inline void _aty_st_8(unsigned int regindex, u8 val,
 
 static u32 _aty_ld_pll(unsigned int pll_index,
 		       const struct aty128fb_par *par)
-{       
+{
 	aty_st_8(CLOCK_CNTL_INDEX, pll_index & 0x3F);
 	return aty_ld_le32(CLOCK_CNTL_DATA);
 }
 
-    
+
 static void _aty_st_pll(unsigned int pll_index, u32 val,
 			const struct aty128fb_par *par)
 {
@@ -619,7 +620,7 @@ static int register_test(const struct aty128fb_par *par)
 		aty_st_le32(BIOS_0_SCRATCH, 0xAAAAAAAA);
 
 		if (aty_ld_le32(BIOS_0_SCRATCH) == 0xAAAAAAAA)
-			flag = 1; 
+			flag = 1;
 	}
 
 	aty_st_le32(BIOS_0_SCRATCH, val);	// restore value
@@ -901,7 +902,7 @@ static void aty128_get_pllinfo(struct aty128fb_par *par,
 
 	bios_hdr = BIOS_IN16(0x48);
 	bios_pll = BIOS_IN16(bios_hdr + 0x30);
-	
+
 	par->constants.ppll_max = BIOS_IN32(bios_pll + 0x16);
 	par->constants.ppll_min = BIOS_IN32(bios_pll + 0x12);
 	par->constants.xclk = BIOS_IN16(bios_pll + 0x08);
@@ -913,7 +914,7 @@ static void aty128_get_pllinfo(struct aty128fb_par *par,
 			par->constants.xclk, par->constants.ref_divider,
 			par->constants.ref_clk);
 
-}           
+}
 
 #ifdef CONFIG_X86
 static void __iomem *aty128_find_mem_vbios(struct aty128fb_par *par)
@@ -925,7 +926,7 @@ static void __iomem *aty128_find_mem_vbios(struct aty128fb_par *par)
 	 */
         u32  segstart;
         unsigned char __iomem *rom_base = NULL;
-                                                
+
         for (segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) {
                 rom_base = ioremap(segstart, 0x10000);
 		if (rom_base == NULL)
@@ -1118,12 +1119,12 @@ static int aty128_var_to_crtc(const struct fb_var_screeninfo *var,
 		v_sync_wid = 1;
 	else if (v_sync_wid > 0x1f)        /* 0x1f = max vwidth */
 		v_sync_wid = 0x1f;
-    
+
 	v_sync_strt = v_disp + lower;
 
 	h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
 	v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
-    
+
 	c_sync = sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0;
 
 	crtc->gen_cntl = 0x3000000L | c_sync | (dst << 8);
@@ -1301,11 +1302,11 @@ static void aty128_set_lcd_enable(struct aty128fb_par *par, int on)
 		aty_st_le32(LVDS_GEN_CNTL, reg);
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
 		aty128_bl_set_power(info, FB_BLANK_UNBLANK);
-#endif	
+#endif
 	} else {
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
 		aty128_bl_set_power(info, FB_BLANK_POWERDOWN);
-#endif	
+#endif
 		reg = aty_ld_le32(LVDS_GEN_CNTL);
 		reg |= LVDS_DISPLAY_DIS;
 		aty_st_le32(LVDS_GEN_CNTL, reg);
@@ -1481,7 +1482,7 @@ static int aty128_ddafifo(struct aty128_ddafifo *dsp,
  * This actually sets the video mode.
  */
 static int aty128fb_set_par(struct fb_info *info)
-{ 
+{
 	struct aty128fb_par *par = info->par;
 	u32 config;
 	int err;
@@ -1595,7 +1596,7 @@ static int aty128_encode_var(struct fb_var_screeninfo *var,
 	var->accel_flags = par->accel_flags;
 
 	return 0;
-}           
+}
 
 
 static int aty128fb_check_var(struct fb_var_screeninfo *var,
@@ -1979,12 +1980,12 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 			/* PowerBook Titanium */
 			if (of_machine_is_compatible("PowerBook3,2"))
 				default_vmode = VMODE_1152_768_60;
-	
-			if (default_cmode > 16) 
+
+			if (default_cmode > 16)
 				default_cmode = CMODE_32;
-			else if (default_cmode > 8) 
+			else if (default_cmode > 8)
 				default_cmode = CMODE_16;
-			else 
+			else
 				default_cmode = CMODE_8;
 
 			if (mac_vmode_to_var(default_vmode, default_cmode, &var))
@@ -1994,7 +1995,7 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 #endif /* CONFIG_PPC_PMAC */
 	{
 		if (mode_option)
-			if (fb_find_mode(&var, info, mode_option, NULL, 
+			if (fb_find_mode(&var, info, mode_option, NULL,
 					 0, &defaultmode, 8) == 0)
 				var = default_var;
 	}
@@ -2055,6 +2056,10 @@ static int aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	void __iomem *bios = NULL;
 #endif
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "aty128fb");
+	if (err)
+		return err;
+
 	/* Enable device in PCI config */
 	if ((err = pci_enable_device(pdev))) {
 		printk(KERN_ERR "aty128fb: Cannot enable PCI device: %d\n",
@@ -2301,7 +2306,7 @@ static int aty128fb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
 	struct aty128fb_par *par = info->par;
 	u32 value;
 	int rc;
-    
+
 	switch (cmd) {
 	case FBIO_ATY128_SET_MIRROR:
 		if (par->chip_gen != rage_M3)
@@ -2313,8 +2318,8 @@ static int aty128fb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
 		par->crt_on = (value & 0x02) != 0;
 		if (!par->crt_on && !par->lcd_on)
 			par->lcd_on = 1;
-		aty128_set_crt_enable(par, par->crt_on);	
-		aty128_set_lcd_enable(par, par->lcd_on);	
+		aty128_set_crt_enable(par, par->crt_on);
+		aty128_set_lcd_enable(par, par->lcd_on);
 		return 0;
 	case FBIO_ATY128_GET_MIRROR:
 		if (par->chip_gen != rage_M3)
@@ -2331,7 +2336,7 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
 
 	if (!par->pdev->pm_cap)
 		return;
-		
+
 	/* Set the chip into the appropriate suspend mode (we use D2,
 	 * D3 would require a complete re-initialisation of the chip,
 	 * including PCI config registers, clocks, AGP configuration, ...)
@@ -2376,12 +2381,12 @@ static int aty128_pci_suspend_late(struct device *dev, pm_message_t state)
 	 */
 	return 0;
 #endif /* CONFIG_PPC_PMAC */
-	 
+
 	if (state.event == pdev->dev.power.power_state.event)
 		return 0;
 
 	printk(KERN_DEBUG "aty128fb: suspending...\n");
-	
+
 	console_lock();
 
 	fb_set_suspend(info, 1);
diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index 14eb718bd67c..b3463d137152 100644
--- a/drivers/video/fbdev/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -48,6 +48,7 @@
 
 ******************************************************************************/
 
+#include <linux/aperture.h>
 #include <linux/compat.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -3533,7 +3534,11 @@ static int atyfb_pci_probe(struct pci_dev *pdev,
 	struct fb_info *info;
 	struct resource *rp;
 	struct atyfb_par *par;
-	int rc = -ENOMEM;
+	int rc;
+
+	rc = aperture_remove_conflicting_pci_devices(pdev, "atyfb");
+	if (rc)
+		return rc;
 
 	/* Enable device in PCI config */
 	if (pci_enable_device(pdev)) {
diff --git a/drivers/video/fbdev/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
index a14a8d73035c..8b28c9bddd97 100644
--- a/drivers/video/fbdev/aty/radeon_base.c
+++ b/drivers/video/fbdev/aty/radeon_base.c
@@ -7,7 +7,7 @@
  *	Copyright 2000	Ani Joshi <ajoshi@kernel.crashing.org>
  *
  *	i2c bits from Luca Tettamanti <kronos@kronoz.cjb.net>
- *	
+ *
  *	Special thanks to ATI DevRel team for their hardware donations.
  *
  *	...Insert GPL boilerplate here...
@@ -54,6 +54,7 @@
 
 #include "radeonfb.h"
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -110,7 +111,7 @@ static const struct pci_device_id radeonfb_pci_table[] = {
 	/* Radeon IGP320M (U1) */
 	CHIP_DEF(PCI_CHIP_RS100_4336,	RS100,	CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY),
 	/* Radeon IGP320 (A3) */
-	CHIP_DEF(PCI_CHIP_RS100_4136,	RS100,	CHIP_HAS_CRTC2 | CHIP_IS_IGP), 
+	CHIP_DEF(PCI_CHIP_RS100_4136,	RS100,	CHIP_HAS_CRTC2 | CHIP_IS_IGP),
 	/* IGP330M/340M/350M (U2) */
 	CHIP_DEF(PCI_CHIP_RS200_4337,	RS200,	CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY),
 	/* IGP330/340/350 (A4) */
@@ -240,7 +241,7 @@ typedef struct {
  * interfere with anything
  */
 static reg_val common_regs[] = {
-	{ OVR_CLR, 0 },	
+	{ OVR_CLR, 0 },
 	{ OVR_WID_LEFT_RIGHT, 0 },
 	{ OVR_WID_TOP_BOTTOM, 0 },
 	{ OV0_SCALE_CNTL, 0 },
@@ -255,7 +256,7 @@ static reg_val common_regs[] = {
 /*
  * globals
  */
-        
+
 static char *mode_option;
 static char *monitor_layout;
 static bool noaccel = 0;
@@ -422,7 +423,7 @@ static int radeon_map_ROM(struct radeonfb_info *rinfo, struct pci_dev *dev)
 	 * ROM somewhere in the first meg. We will just ignore the copy
 	 * and use the ROM directly.
 	 */
-    
+
     	/* Fix from ATI for problem with Radeon hardware not leaving ROM enabled */
     	unsigned int temp;
 	temp = INREG(MPP_TB_CONFIG);
@@ -430,14 +431,14 @@ static int radeon_map_ROM(struct radeonfb_info *rinfo, struct pci_dev *dev)
 	temp |= 0x04 << 24;
 	OUTREG(MPP_TB_CONFIG, temp);
 	temp = INREG(MPP_TB_CONFIG);
-                                                                                                          
+
 	rom = pci_map_rom(dev, &rom_size);
 	if (!rom) {
 		printk(KERN_ERR "radeonfb (%s): ROM failed to map\n",
 		       pci_name(rinfo->pdev));
 		return -ENOMEM;
 	}
-	
+
 	rinfo->bios_seg = rom;
 
 	/* Very simple test to make sure it appeared */
@@ -515,7 +516,7 @@ static int  radeon_find_mem_vbios(struct radeonfb_info *rinfo)
 	 */
         u32  segstart;
 	void __iomem *rom_base = NULL;
-                                                
+
         for(segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) {
                 rom_base = ioremap(segstart, 0x10000);
 		if (rom_base == NULL)
@@ -605,16 +606,16 @@ static int radeon_probe_pll_params(struct radeonfb_info *rinfo)
 	for(i=0; i<1000000; i++)
 		if (((INREG(CRTC_VLINE_CRNT_VLINE) >> 16) & 0x3ff) == 0)
 			break;
-	
+
 	stop_time = ktime_get();
-	
+
 	local_irq_enable();
 
 	total_usecs = ktime_us_delta(stop_time, start_time);
 	if (total_usecs >= 10 * USEC_PER_SEC || total_usecs == 0)
 		return -1;
 	hz = USEC_PER_SEC/(u32)total_usecs;
- 
+
 	hTotal = ((INREG(CRTC_H_TOTAL_DISP) & 0x1ff) + 1) * 8;
 	vTotal = ((INREG(CRTC_V_TOTAL_DISP) & 0x3ff) + 1);
 	vclk = (long long)hTotal * (long long)vTotal * hz;
@@ -662,7 +663,7 @@ static int radeon_probe_pll_params(struct radeonfb_info *rinfo)
 		denom *= 3;
 		break;
 	case 6:
-		denom *= 6;   
+		denom *= 6;
 		break;
 	case 7:
 		denom *= 12;
@@ -878,7 +879,7 @@ static int radeonfb_check_var (struct fb_var_screeninfo *var, struct fb_info *in
                         v.green.length = 6;
                         v.blue.length = 5;
                         v.transp.offset = v.transp.length = 0;
-                        break;                          
+                        break;
                 case 24:
                         nom = 4;
                         den = 1;
@@ -908,7 +909,7 @@ static int radeonfb_check_var (struct fb_var_screeninfo *var, struct fb_info *in
 		v.yres_virtual = v.yres;
 	if (v.xres_virtual < v.xres)
 		v.xres_virtual = v.xres;
-                
+
 
 	/* XXX I'm adjusting xres_virtual to the pitch, that may help XFree
 	 * with some panels, though I don't quite like this solution
@@ -929,14 +930,14 @@ static int radeonfb_check_var (struct fb_var_screeninfo *var, struct fb_info *in
 
         if (v.xoffset > v.xres_virtual - v.xres)
                 v.xoffset = v.xres_virtual - v.xres - 1;
-                        
+
         if (v.yoffset > v.yres_virtual - v.yres)
                 v.yoffset = v.yres_virtual - v.yres - 1;
-         
+
         v.red.msb_right = v.green.msb_right = v.blue.msb_right =
                           v.transp.offset = v.transp.length =
                           v.transp.msb_right = 0;
-	
+
         memcpy(var, &v, sizeof(v));
 
         return 0;
@@ -951,7 +952,7 @@ static int radeonfb_pan_display (struct fb_var_screeninfo *var,
 	if ((var->xoffset + info->var.xres > info->var.xres_virtual)
 	    || (var->yoffset + info->var.yres > info->var.yres_virtual))
 		return -EINVAL;
-                
+
         if (rinfo->asleep)
         	return 0;
 
@@ -1151,7 +1152,7 @@ static int radeonfb_blank (int blank, struct fb_info *info)
 
 	if (rinfo->asleep)
 		return 0;
-		
+
 	return radeon_screen_blank(rinfo, blank, 0);
 }
 
@@ -1401,7 +1402,7 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg
 		} else {
 			/* R300 uses ref_div_acc field as real ref divider */
 			OUTPLLP(PPLL_REF_DIV,
-				(mode->ppll_ref_div << R300_PPLL_REF_DIV_ACC_SHIFT), 
+				(mode->ppll_ref_div << R300_PPLL_REF_DIV_ACC_SHIFT),
 				~R300_PPLL_REF_DIV_ACC_MASK);
 		}
 	} else
@@ -1423,7 +1424,7 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg
 	   workaround shouldn't have any effect on them. */
 	for (i = 0; (i < 10000 && INPLL(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R); i++)
 		;
-	
+
 	OUTPLL(HTOTAL_CNTL, 0);
 
 	/* Clear reset & atomic update */
@@ -1510,7 +1511,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode,
 
 	radeon_fifo_wait(2);
 	OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl);
-	
+
 	return;
 }
 
@@ -1735,7 +1736,7 @@ static int radeonfb_set_par(struct fb_info *info)
 	/* Clear auto-center etc... */
 	newmode->crtc_more_cntl = rinfo->init_state.crtc_more_cntl;
 	newmode->crtc_more_cntl &= 0xfffffff0;
-	
+
 	if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
 		newmode->crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN;
 		if (mirror)
@@ -1793,7 +1794,7 @@ static int radeonfb_set_par(struct fb_info *info)
 			newmode->surface_cntl |= NONSURF_AP0_SWP_16BPP;
 			newmode->surface_cntl |= NONSURF_AP1_SWP_16BPP;
 			break;
-		case 24:	
+		case 24:
 		case 32:
 			newmode->surface_cntl |= NONSURF_AP0_SWP_32BPP;
 			newmode->surface_cntl |= NONSURF_AP1_SWP_32BPP;
@@ -2028,7 +2029,7 @@ static void fixup_memory_mappings(struct radeonfb_info *rinfo)
 	}
 	save_crtc_gen_cntl = INREG(CRTC_GEN_CNTL);
 	save_crtc_ext_cntl = INREG(CRTC_EXT_CNTL);
-	
+
 	OUTREG(CRTC_EXT_CNTL, save_crtc_ext_cntl | CRTC_DISPLAY_DIS);
 	OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl | CRTC_DISP_REQ_EN_B);
 	mdelay(100);
@@ -2038,7 +2039,7 @@ static void fixup_memory_mappings(struct radeonfb_info *rinfo)
 
 #ifdef SET_MC_FB_FROM_APERTURE
 	/* Set framebuffer to be at the same address as set in PCI BAR */
-	OUTREG(MC_FB_LOCATION, 
+	OUTREG(MC_FB_LOCATION,
 		((aper_base + aper_size - 1) & 0xffff0000) | (aper_base >> 16));
 	rinfo->fb_local_base = aper_base;
 #else
@@ -2079,7 +2080,7 @@ static void fixup_memory_mappings(struct radeonfb_info *rinfo)
 	OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl);
 	OUTREG(CRTC_EXT_CNTL, save_crtc_ext_cntl);
 	if (rinfo->has_CRTC2)
-		OUTREG(CRTC2_GEN_CNTL, save_crtc2_gen_cntl);	
+		OUTREG(CRTC2_GEN_CNTL, save_crtc2_gen_cntl);
 
 	pr_debug("aper_base: %08x MC_FB_LOC to: %08x, MC_AGP_LOC to: %08x\n",
 		aper_base,
@@ -2239,20 +2240,10 @@ static const struct bin_attribute edid2_attr = {
 
 static int radeon_kick_out_firmware_fb(struct pci_dev *pdev)
 {
-	struct apertures_struct *ap;
-
-	ap = alloc_apertures(1);
-	if (!ap)
-		return -ENOMEM;
-
-	ap->ranges[0].base = pci_resource_start(pdev, 0);
-	ap->ranges[0].size = pci_resource_len(pdev, 0);
+	resource_size_t base = pci_resource_start(pdev, 0);
+	resource_size_t size = pci_resource_len(pdev, 0);
 
-	remove_conflicting_framebuffers(ap, KBUILD_MODNAME, false);
-
-	kfree(ap);
-
-	return 0;
+	return aperture_remove_conflicting_devices(base, size, false, KBUILD_MODNAME);
 }
 
 static int radeonfb_pci_register(struct pci_dev *pdev,
@@ -2265,7 +2256,7 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
 	int err = 0;
 
 	pr_debug("radeonfb_pci_register BEGIN\n");
-	
+
 	/* Enable device in PCI config */
 	ret = pci_enable_device(pdev);
 	if (ret < 0) {
@@ -2280,9 +2271,9 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
 		goto err_disable;
 	}
 	rinfo = info->par;
-	rinfo->info = info;	
+	rinfo->info = info;
 	rinfo->pdev = pdev;
-	
+
 	spin_lock_init(&rinfo->reg_lock);
 	timer_setup(&rinfo->lvds_timer, radeon_lvds_timer_func, 0);
 
@@ -2521,7 +2512,7 @@ static void radeonfb_pci_unregister(struct pci_dev *pdev)
 {
         struct fb_info *info = pci_get_drvdata(pdev);
         struct radeonfb_info *rinfo = info->par;
- 
+
         if (!rinfo)
                 return;
 
@@ -2540,7 +2531,7 @@ static void radeonfb_pci_unregister(struct pci_dev *pdev)
 
         iounmap(rinfo->mmio_base);
         iounmap(rinfo->fb_base);
- 
+
 	pci_release_region(pdev, 2);
 	pci_release_region(pdev, 0);
 
@@ -2550,7 +2541,7 @@ static void radeonfb_pci_unregister(struct pci_dev *pdev)
 		fb_destroy_modedb(rinfo->mon1_modedb);
 #ifdef CONFIG_FB_RADEON_I2C
 	radeon_delete_i2c_busses(rinfo);
-#endif        
+#endif
 	fb_dealloc_cmap(&info->cmap);
         framebuffer_release(info);
 }
diff --git a/drivers/video/fbdev/carminefb.c b/drivers/video/fbdev/carminefb.c
index 3a1c2e0739a1..4651b48a87f9 100644
--- a/drivers/video/fbdev/carminefb.c
+++ b/drivers/video/fbdev/carminefb.c
@@ -7,6 +7,7 @@
  * - FB1 is display 1 with unique memory area
  * - both display use 32 bit colors
  */
+#include <linux/aperture.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/fb.h>
@@ -614,6 +615,10 @@ static int carminefb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	struct fb_info *info;
 	int ret;
 
+	ret = aperture_remove_conflicting_pci_devices(dev, "carminefb");
+	if (ret)
+		return ret;
+
 	ret = pci_enable_device(dev);
 	if (ret)
 		return ret;
diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 2b00a9d554fc..f1c1c95c1fdf 100644
--- a/drivers/video/fbdev/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
@@ -14,6 +14,7 @@
  *  more details.
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -122,7 +123,7 @@ static int chipsfb_set_par(struct fb_info *info)
 		info->var.blue.offset = 0;
 		info->var.red.length = info->var.green.length =
 			info->var.blue.length = 5;
-		
+
 	} else {
 		/* p->var.bits_per_pixel == 8 */
 		write_cr(0x13, 100);		// Set line length (doublewords)
@@ -131,13 +132,13 @@ static int chipsfb_set_par(struct fb_info *info)
 		write_xr(0x20, 0x00);		// 8 bit blitter mode
 
 		info->fix.line_length = 800;
-		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;		
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 
  		info->var.red.offset = info->var.green.offset =
 			info->var.blue.offset = 0;
 		info->var.red.length = info->var.green.length =
 			info->var.blue.length = 8;
-		
+
 	}
 	return 0;
 }
@@ -351,7 +352,11 @@ static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent)
 	struct fb_info *p;
 	unsigned long addr;
 	unsigned short cmd;
-	int rc = -ENODEV;
+	int rc;
+
+	rc = aperture_remove_conflicting_pci_devices(dp, "chipsfb");
+	if (rc)
+		return rc;
 
 	if (pci_enable_device(dp) < 0) {
 		dev_err(&dp->dev, "Cannot enable PCI device\n");
diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
index 2a9fa06881b5..b08bee43779a 100644
--- a/drivers/video/fbdev/cirrusfb.c
+++ b/drivers/video/fbdev/cirrusfb.c
@@ -34,6 +34,7 @@
  *
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -2085,6 +2086,10 @@ static int cirrusfb_pci_register(struct pci_dev *pdev,
 	unsigned long board_addr, board_size;
 	int ret;
 
+	ret = aperture_remove_conflicting_pci_devices(pdev, "cirrusfb");
+	if (ret)
+		return ret;
+
 	ret = pci_enable_device(pdev);
 	if (ret < 0) {
 		printk(KERN_ERR "cirrusfb: Cannot enable PCI device\n");
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 02b0cf2cfafe..1e70d8c67653 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -13,13 +13,13 @@
 
 #include <linux/module.h>
 
+#include <linux/aperture.h>
 #include <linux/compat.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/slab.h>
-#include <linux/sysfb.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
 #include <linux/vt.h>
@@ -40,6 +40,7 @@
 
 #include <asm/fb.h>
 
+#include <video/vga.h>
 
     /*
      *  Frame buffer device initialization and setup routines
@@ -50,10 +51,10 @@
 static DEFINE_MUTEX(registration_lock);
 
 struct fb_info *registered_fb[FB_MAX] __read_mostly;
-EXPORT_SYMBOL(registered_fb);
-
 int num_registered_fb __read_mostly;
-EXPORT_SYMBOL(num_registered_fb);
+#define for_each_registered_fb(i)		\
+	for (i = 0; i < FB_MAX; i++)		\
+		if (!registered_fb[i]) {} else
 
 bool fb_center_logo __read_mostly;
 
@@ -1525,103 +1526,6 @@ static int fb_check_foreignness(struct fb_info *fi)
 	return 0;
 }
 
-static bool apertures_overlap(struct aperture *gen, struct aperture *hw)
-{
-	/* is the generic aperture base the same as the HW one */
-	if (gen->base == hw->base)
-		return true;
-	/* is the generic aperture base inside the hw base->hw base+size */
-	if (gen->base > hw->base && gen->base < hw->base + hw->size)
-		return true;
-	return false;
-}
-
-static bool fb_do_apertures_overlap(struct apertures_struct *gena,
-				    struct apertures_struct *hwa)
-{
-	int i, j;
-	if (!hwa || !gena)
-		return false;
-
-	for (i = 0; i < hwa->count; ++i) {
-		struct aperture *h = &hwa->ranges[i];
-		for (j = 0; j < gena->count; ++j) {
-			struct aperture *g = &gena->ranges[j];
-			printk(KERN_DEBUG "checking generic (%llx %llx) vs hw (%llx %llx)\n",
-				(unsigned long long)g->base,
-				(unsigned long long)g->size,
-				(unsigned long long)h->base,
-				(unsigned long long)h->size);
-			if (apertures_overlap(g, h))
-				return true;
-		}
-	}
-
-	return false;
-}
-
-static void do_unregister_framebuffer(struct fb_info *fb_info);
-
-#define VGA_FB_PHYS 0xA0000
-static void do_remove_conflicting_framebuffers(struct apertures_struct *a,
-					       const char *name, bool primary)
-{
-	int i;
-
-restart_removal:
-	/* check all firmware fbs and kick off if the base addr overlaps */
-	for_each_registered_fb(i) {
-		struct apertures_struct *gen_aper;
-		struct device *device;
-
-		if (!(registered_fb[i]->flags & FBINFO_MISC_FIRMWARE))
-			continue;
-
-		gen_aper = registered_fb[i]->apertures;
-		device = registered_fb[i]->device;
-		if (fb_do_apertures_overlap(gen_aper, a) ||
-			(primary && gen_aper && gen_aper->count &&
-			 gen_aper->ranges[0].base == VGA_FB_PHYS)) {
-
-			printk(KERN_INFO "fb%d: switching to %s from %s\n",
-			       i, name, registered_fb[i]->fix.id);
-
-			/*
-			 * If we kick-out a firmware driver, we also want to remove
-			 * the underlying platform device, such as simple-framebuffer,
-			 * VESA, EFI, etc. A native driver will then be able to
-			 * allocate the memory range.
-			 *
-			 * If it's not a platform device, at least print a warning. A
-			 * fix would add code to remove the device from the system. For
-			 * framebuffers without any Linux device, print a warning as
-			 * well.
-			 */
-			if (!device) {
-				pr_warn("fb%d: no device set\n", i);
-				do_unregister_framebuffer(registered_fb[i]);
-			} else if (dev_is_platform(device)) {
-				/*
-				 * Drop the lock because if the device is unregistered, its
-				 * driver will call to unregister_framebuffer(), that takes
-				 * this lock.
-				 */
-				mutex_unlock(&registration_lock);
-				platform_device_unregister(to_platform_device(device));
-				mutex_lock(&registration_lock);
-			} else {
-				pr_warn("fb%d: cannot remove device\n", i);
-				do_unregister_framebuffer(registered_fb[i]);
-			}
-			/*
-			 * Restart the removal loop now that the device has been
-			 * unregistered and its associated framebuffer gone.
-			 */
-			goto restart_removal;
-		}
-	}
-}
-
 static int do_register_framebuffer(struct fb_info *fb_info)
 {
 	int i;
@@ -1630,10 +1534,6 @@ static int do_register_framebuffer(struct fb_info *fb_info)
 	if (fb_check_foreignness(fb_info))
 		return -ENOSYS;
 
-	do_remove_conflicting_framebuffers(fb_info->apertures,
-					   fb_info->fix.id,
-					   fb_is_primary_device(fb_info));
-
 	if (num_registered_fb == FB_MAX)
 		return -ENXIO;
 
@@ -1752,100 +1652,31 @@ static void do_unregister_framebuffer(struct fb_info *fb_info)
 	put_fb_info(fb_info);
 }
 
-/**
- * remove_conflicting_framebuffers - remove firmware-configured framebuffers
- * @a: memory range, users of which are to be removed
- * @name: requesting driver name
- * @primary: also kick vga16fb if present
- *
- * This function removes framebuffer devices (initialized by firmware/bootloader)
- * which use memory range described by @a. If @a is NULL all such devices are
- * removed.
- */
-int remove_conflicting_framebuffers(struct apertures_struct *a,
-				    const char *name, bool primary)
+static int fb_aperture_acquire_for_platform_device(struct fb_info *fb_info)
 {
-	bool do_free = false;
-
-	if (!a) {
-		a = alloc_apertures(1);
-		if (!a)
-			return -ENOMEM;
-
-		a->ranges[0].base = 0;
-		a->ranges[0].size = ~0;
-		do_free = true;
-	}
-
-	/*
-	 * If a driver asked to unregister a platform device registered by
-	 * sysfb, then can be assumed that this is a driver for a display
-	 * that is set up by the system firmware and has a generic driver.
-	 *
-	 * Drivers for devices that don't have a generic driver will never
-	 * ask for this, so let's assume that a real driver for the display
-	 * was already probed and prevent sysfb to register devices later.
-	 */
-	sysfb_disable();
-
-	mutex_lock(&registration_lock);
-	do_remove_conflicting_framebuffers(a, name, primary);
-	mutex_unlock(&registration_lock);
-
-	if (do_free)
-		kfree(a);
-
-	return 0;
-}
-EXPORT_SYMBOL(remove_conflicting_framebuffers);
+	struct apertures_struct *ap = fb_info->apertures;
+	struct device *dev = fb_info->device;
+	struct platform_device *pdev;
+	unsigned int i;
+	int ret;
 
-/**
- * remove_conflicting_pci_framebuffers - remove firmware-configured framebuffers for PCI devices
- * @pdev: PCI device
- * @name: requesting driver name
- *
- * This function removes framebuffer devices (eg. initialized by firmware)
- * using memory range configured for any of @pdev's memory bars.
- *
- * The function assumes that PCI device with shadowed ROM drives a primary
- * display and so kicks out vga16fb.
- */
-int remove_conflicting_pci_framebuffers(struct pci_dev *pdev, const char *name)
-{
-	struct apertures_struct *ap;
-	bool primary = false;
-	int err, idx, bar;
+	if (!ap)
+		return 0;
 
-	for (idx = 0, bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
-		if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM))
-			continue;
-		idx++;
-	}
+	if (!dev_is_platform(dev))
+		return 0;
 
-	ap = alloc_apertures(idx);
-	if (!ap)
-		return -ENOMEM;
+	pdev = to_platform_device(dev);
 
-	for (idx = 0, bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
-		if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM))
-			continue;
-		ap->ranges[idx].base = pci_resource_start(pdev, bar);
-		ap->ranges[idx].size = pci_resource_len(pdev, bar);
-		pci_dbg(pdev, "%s: bar %d: 0x%lx -> 0x%lx\n", __func__, bar,
-			(unsigned long)pci_resource_start(pdev, bar),
-			(unsigned long)pci_resource_end(pdev, bar));
-		idx++;
+	for (ret = 0, i = 0; i < ap->count; ++i) {
+		ret = devm_aperture_acquire_for_platform_device(pdev, ap->ranges[i].base,
+								ap->ranges[i].size);
+		if (ret)
+			break;
 	}
 
-#ifdef CONFIG_X86
-	primary = pdev->resource[PCI_ROM_RESOURCE].flags &
-					IORESOURCE_ROM_SHADOW;
-#endif
-	err = remove_conflicting_framebuffers(ap, name, primary);
-	kfree(ap);
-	return err;
+	return ret;
 }
-EXPORT_SYMBOL(remove_conflicting_pci_framebuffers);
 
 /**
  *	register_framebuffer - registers a frame buffer device
@@ -1861,6 +1692,12 @@ register_framebuffer(struct fb_info *fb_info)
 {
 	int ret;
 
+	if (fb_info->flags & FBINFO_MISC_FIRMWARE) {
+		ret = fb_aperture_acquire_for_platform_device(fb_info);
+		if (ret)
+			return ret;
+	}
+
 	mutex_lock(&registration_lock);
 	ret = do_register_framebuffer(fb_info);
 	mutex_unlock(&registration_lock);
diff --git a/drivers/video/fbdev/cyber2000fb.c b/drivers/video/fbdev/cyber2000fb.c
index 8f041f9b14c7..585af90a68a5 100644
--- a/drivers/video/fbdev/cyber2000fb.c
+++ b/drivers/video/fbdev/cyber2000fb.c
@@ -33,6 +33,7 @@
  * (which, incidentally, is about the same saving as a 2.5in hard disk
  * entering standby mode.)
  */
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -1720,6 +1721,10 @@ static int cyberpro_pci_probe(struct pci_dev *dev,
 
 	sprintf(name, "CyberPro%4X", id->device);
 
+	err = aperture_remove_conflicting_pci_devices(dev, name);
+	if (err)
+		return err;
+
 	err = pci_enable_device(dev);
 	if (err)
 		return err;
diff --git a/drivers/video/fbdev/geode/gx1fb_core.c b/drivers/video/fbdev/geode/gx1fb_core.c
index e41204ecb0e3..1514c653a84f 100644
--- a/drivers/video/fbdev/geode/gx1fb_core.c
+++ b/drivers/video/fbdev/geode/gx1fb_core.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2005 Arcom Control Systems Ltd.
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -320,6 +321,10 @@ static int gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct fb_info *info;
 	int ret;
 
+	ret = aperture_remove_conflicting_pci_devices(pdev, "gx1fb");
+	if (ret)
+		return ret;
+
 	info = gx1fb_init_fbinfo(&pdev->dev);
 	if (!info)
 		return -ENOMEM;
diff --git a/drivers/video/fbdev/geode/gxfb_core.c b/drivers/video/fbdev/geode/gxfb_core.c
index 44089b331f91..2527bd80ec5f 100644
--- a/drivers/video/fbdev/geode/gxfb_core.c
+++ b/drivers/video/fbdev/geode/gxfb_core.c
@@ -15,6 +15,7 @@
  *
  * 16 MiB of framebuffer memory is assumed to be available.
  */
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -364,6 +365,10 @@ static int gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct fb_videomode *modedb_ptr;
 	unsigned int modedb_size;
 
+	ret = aperture_remove_conflicting_pci_devices(pdev, "gxfb");
+	if (ret)
+		return ret;
+
 	info = gxfb_init_fbinfo(&pdev->dev);
 	if (!info)
 		return -ENOMEM;
diff --git a/drivers/video/fbdev/geode/lxfb_core.c b/drivers/video/fbdev/geode/lxfb_core.c
index 66c81262d18f..9d26592dbfce 100644
--- a/drivers/video/fbdev/geode/lxfb_core.c
+++ b/drivers/video/fbdev/geode/lxfb_core.c
@@ -6,6 +6,7 @@
  * Built from gxfb (which is Copyright (C) 2006 Arcom Control Systems Ltd.)
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -484,6 +485,10 @@ static int lxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct fb_videomode *modedb_ptr;
 	unsigned int modedb_size;
 
+	ret = aperture_remove_conflicting_pci_devices(pdev, "lxfb");
+	if (ret)
+		return ret;
+
 	info = lxfb_init_fbinfo(&pdev->dev);
 
 	if (info == NULL)
diff --git a/drivers/video/fbdev/gxt4500.c b/drivers/video/fbdev/gxt4500.c
index 94588b809ebf..0dcef4bec8d7 100644
--- a/drivers/video/fbdev/gxt4500.c
+++ b/drivers/video/fbdev/gxt4500.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2006 Paul Mackerras, IBM Corp. <paulus@samba.org>
  */
 
+#include <linux/aperture.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/fb.h>
@@ -621,6 +622,10 @@ static int gxt4500_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct fb_var_screeninfo var;
 	enum gxt_cards cardtype;
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "gxt4500fb");
+	if (err)
+		return err;
+
 	err = pci_enable_device(pdev);
 	if (err) {
 		dev_err(&pdev->dev, "gxt4500: cannot enable PCI device: %d\n",
diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index b58b445bb529..072ce07ba9e0 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -45,6 +45,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/vmalloc.h>
@@ -1070,8 +1071,9 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info)
 	info->screen_size = dio_fb_size;
 
 getmem_done:
-	remove_conflicting_framebuffers(info->apertures,
-					KBUILD_MODNAME, false);
+	aperture_remove_conflicting_devices(info->apertures->ranges[0].base,
+					    info->apertures->ranges[0].size,
+					    false, KBUILD_MODNAME);
 
 	if (gen2vm) {
 		/* framebuffer is reallocated, clear screen_info to avoid misuse from kexec */
diff --git a/drivers/video/fbdev/i740fb.c b/drivers/video/fbdev/i740fb.c
index bd30d8314b68..b795f6503cb6 100644
--- a/drivers/video/fbdev/i740fb.c
+++ b/drivers/video/fbdev/i740fb.c
@@ -12,6 +12,7 @@
  *  i740fb by Patrick LERDA, v0.9
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -1013,6 +1014,10 @@ static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	bool found = false;
 	u8 *edid;
 
+	ret = aperture_remove_conflicting_pci_devices(dev, "i740fb");
+	if (ret)
+		return ret;
+
 	info = framebuffer_alloc(sizeof(struct i740fb_par), &(dev->dev));
 	if (!info)
 		return -ENOMEM;
diff --git a/drivers/video/fbdev/i810/i810_main.c b/drivers/video/fbdev/i810/i810_main.c
index 13bbf7fe13bf..ff09f8c20bfc 100644
--- a/drivers/video/fbdev/i810/i810_main.c
+++ b/drivers/video/fbdev/i810/i810_main.c
@@ -2,12 +2,12 @@
  *  linux/drivers/video/i810_main.c -- Intel 810 frame buffer device
  *
  *      Copyright (C) 2001 Antonino Daplas<adaplas@pol.net>
- *      All Rights Reserved      
+ *      All Rights Reserved
  *
  *      Contributors:
  *         Michael Vogt <mvogt@acm.org> - added support for Intel 815 chipsets
- *                                        and enabling the power-on state of 
- *                                        external VGA connectors for 
+ *                                        and enabling the power-on state of
+ *                                        external VGA connectors for
  *                                        secondary displays
  *
  *         Fredrik Andersson <krueger@shell.linux.se> - alpha testing of
@@ -17,10 +17,10 @@
  *                                        timings support
  *
  *	The code framework is a modification of vfb.c by Geert Uytterhoeven.
- *      DotClock and PLL calculations are partly based on i810_driver.c 
+ *      DotClock and PLL calculations are partly based on i810_driver.c
  *              in xfree86 v4.0.3 by Precision Insight.
- *      Watermark calculation and tables are based on i810_wmark.c 
- *              in xfre86 v4.0.3 by Precision Insight.  Slight modifications 
+ *      Watermark calculation and tables are based on i810_wmark.c
+ *              in xfre86 v4.0.3 by Precision Insight.  Slight modifications
  *              only to allow for integer operations instead of floating point.
  *
  *  This file is subject to the terms and conditions of the GNU General Public
@@ -28,6 +28,7 @@
  *  more details.
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -204,8 +205,8 @@ static void i810_dram_off(u8 __iomem *mmio, u8 mode)
  * @mode: protect/unprotect
  *
  * DESCRIPTION:
- * The IBM VGA standard allows protection of certain VGA registers.  
- * This will  protect or unprotect them. 
+ * The IBM VGA standard allows protection of certain VGA registers.
+ * This will  protect or unprotect them.
  */
 static void i810_protect_regs(u8 __iomem *mmio, int mode)
 {
@@ -215,7 +216,7 @@ static void i810_protect_regs(u8 __iomem *mmio, int mode)
 	reg = i810_readb(CR_DATA_CGA, mmio);
 	reg = (mode == OFF) ? reg & ~0x80 :
 		reg | 0x80;
- 		
+
 	i810_writeb(CR_INDEX_CGA, mmio, CR11);
 	i810_writeb(CR_DATA_CGA, mmio, reg);
 }
@@ -225,18 +226,18 @@ static void i810_protect_regs(u8 __iomem *mmio, int mode)
  * @par: pointer to i810fb_par structure
  *
  * DESCRIPTION:
- * Loads the P, M, and N registers.  
+ * Loads the P, M, and N registers.
  */
 static void i810_load_pll(struct i810fb_par *par)
 {
 	u32 tmp1, tmp2;
 	u8 __iomem *mmio = par->mmio_start_virtual;
-	
+
 	tmp1 = par->regs.M | par->regs.N << 16;
 	tmp2 = i810_readl(DCLK_2D, mmio);
 	tmp2 &= ~MN_MASK;
 	i810_writel(DCLK_2D, mmio, tmp1 | tmp2);
-	
+
 	tmp1 = par->regs.P;
 	tmp2 = i810_readl(DCLK_0DS, mmio);
 	tmp2 &= ~(P_OR << 16);
@@ -254,7 +255,7 @@ static void i810_load_pll(struct i810fb_par *par)
  * Load values to VGA registers
  */
 static void i810_load_vga(struct i810fb_par *par)
-{	
+{
 	u8 __iomem *mmio = par->mmio_start_virtual;
 
 	/* interlace */
@@ -327,7 +328,7 @@ static void i810_load_2d(struct i810fb_par *par)
 	u8 tmp8;
 	u8 __iomem *mmio = par->mmio_start_virtual;
 
-  	i810_writel(FW_BLC, mmio, par->watermark); 
+  	i810_writel(FW_BLC, mmio, par->watermark);
 	tmp = i810_readl(PIXCONF, mmio);
 	tmp |= 1 | 1 << 20;
 	i810_writel(PIXCONF, mmio, tmp);
@@ -339,7 +340,7 @@ static void i810_load_2d(struct i810fb_par *par)
 	tmp8 |= 2;
 	i810_writeb(GR_INDEX, mmio, GR10);
 	i810_writeb(GR_DATA, mmio, tmp8);
-}	
+}
 
 /**
  * i810_hires - enables high resolution mode
@@ -348,7 +349,7 @@ static void i810_load_2d(struct i810fb_par *par)
 static void i810_hires(u8 __iomem *mmio)
 {
 	u8 val;
-	
+
 	i810_writeb(CR_INDEX_CGA, mmio, CR80);
 	val = i810_readb(CR_DATA_CGA, mmio);
 	i810_writeb(CR_INDEX_CGA, mmio, CR80);
@@ -363,13 +364,13 @@ static void i810_hires(u8 __iomem *mmio)
  *
  * DESCRIPTION:
  * Loads the characters per line
- */	
+ */
 static void i810_load_pitch(struct i810fb_par *par)
 {
 	u32 tmp, pitch;
 	u8 val;
 	u8 __iomem *mmio = par->mmio_start_virtual;
-			
+
 	pitch = par->pitch >> 3;
 	i810_writeb(SR_INDEX, mmio, SR01);
 	val = i810_readb(SR_DATA, mmio);
@@ -381,7 +382,7 @@ static void i810_load_pitch(struct i810fb_par *par)
 	tmp = pitch & 0xFF;
 	i810_writeb(CR_INDEX_CGA, mmio, CR13);
 	i810_writeb(CR_DATA_CGA, mmio, (u8) tmp);
-	
+
 	tmp = pitch >> 8;
 	i810_writeb(CR_INDEX_CGA, mmio, CR41);
 	val = i810_readb(CR_DATA_CGA, mmio) & ~0x0F;
@@ -414,7 +415,7 @@ static void i810_load_color(struct i810fb_par *par)
 /**
  * i810_load_regs - loads all registers for the mode
  * @par: pointer to i810fb_par structure
- * 
+ *
  * DESCRIPTION:
  * Loads registers
  */
@@ -428,7 +429,7 @@ static void i810_load_regs(struct i810fb_par *par)
 	i810_load_pll(par);
 	i810_load_vga(par);
 	i810_load_vgax(par);
-	i810_dram_off(mmio, ON);	
+	i810_dram_off(mmio, ON);
 	i810_load_2d(par);
 	i810_hires(mmio);
 	i810_screen_off(mmio, ON);
@@ -443,7 +444,7 @@ static void i810_write_dac(u8 regno, u8 red, u8 green, u8 blue,
 	i810_writeb(CLUT_INDEX_WRITE, mmio, regno);
 	i810_writeb(CLUT_DATA, mmio, red);
 	i810_writeb(CLUT_DATA, mmio, green);
-	i810_writeb(CLUT_DATA, mmio, blue); 	
+	i810_writeb(CLUT_DATA, mmio, blue);
 }
 
 static void i810_read_dac(u8 regno, u8 *red, u8 *green, u8 *blue,
@@ -456,13 +457,13 @@ static void i810_read_dac(u8 regno, u8 *red, u8 *green, u8 *blue,
 }
 
 /************************************************************
- *                   VGA State Restore                      * 
+ *                   VGA State Restore                      *
  ************************************************************/
 static void i810_restore_pll(struct i810fb_par *par)
 {
 	u32 tmp1, tmp2;
 	u8 __iomem *mmio = par->mmio_start_virtual;
-	
+
 	tmp1 = par->hw_state.dclk_2d;
 	tmp2 = i810_readl(DCLK_2D, mmio);
 	tmp1 &= ~MN_MASK;
@@ -494,7 +495,7 @@ static void i810_restore_vgax(struct i810fb_par *par)
 {
 	u8 i, j;
 	u8 __iomem *mmio = par->mmio_start_virtual;
-	
+
 	for (i = 0; i < 4; i++) {
 		i810_writeb(CR_INDEX_CGA, mmio, CR30+i);
 		i810_writeb(CR_DATA_CGA, mmio, *(&(par->hw_state.cr30) + i));
@@ -528,7 +529,7 @@ static void i810_restore_vga(struct i810fb_par *par)
 {
 	u8 i;
 	u8 __iomem *mmio = par->mmio_start_virtual;
-	
+
 	for (i = 0; i < 10; i++) {
 		i810_writeb(CR_INDEX_CGA, mmio, CR00 + i);
 		i810_writeb(CR_DATA_CGA, mmio, *((&par->hw_state.cr00) + i));
@@ -559,10 +560,10 @@ static void i810_restore_2d(struct i810fb_par *par)
 	u8 __iomem *mmio = par->mmio_start_virtual;
 
 	tmp_word = i810_readw(BLTCNTL, mmio);
-	tmp_word &= ~(3 << 4); 
+	tmp_word &= ~(3 << 4);
 	tmp_word |= par->hw_state.bltcntl;
 	i810_writew(BLTCNTL, mmio, tmp_word);
-       
+
 	i810_dram_off(mmio, OFF);
 	i810_writel(PIXCONF, mmio, par->hw_state.pixconf);
 	i810_dram_off(mmio, ON);
@@ -577,7 +578,7 @@ static void i810_restore_2d(struct i810fb_par *par)
 	tmp_long |= par->hw_state.fw_blc;
 	i810_writel(FW_BLC, mmio, tmp_long);
 
-	i810_writel(HWS_PGA, mmio, par->hw_state.hws_pga); 
+	i810_writel(HWS_PGA, mmio, par->hw_state.hws_pga);
 	i810_writew(IER, mmio, par->hw_state.ier);
 	i810_writew(IMR, mmio, par->hw_state.imr);
 	i810_writel(DPLYSTAS, mmio, par->hw_state.dplystas);
@@ -621,7 +622,7 @@ static void i810_save_vgax(struct i810fb_par *par)
 	i810_writeb(CR_INDEX_CGA, mmio, CR41);
 	par->hw_state.cr41 = i810_readb(CR_DATA_CGA, mmio);
 	i810_writeb(CR_INDEX_CGA, mmio, CR70);
-	par->hw_state.cr70 = i810_readb(CR_DATA_CGA, mmio);	
+	par->hw_state.cr70 = i810_readb(CR_DATA_CGA, mmio);
 	par->hw_state.msr = i810_readb(MSR_READ, mmio);
 	i810_writeb(CR_INDEX_CGA, mmio, CR80);
 	par->hw_state.cr80 = i810_readb(CR_DATA_CGA, mmio);
@@ -654,8 +655,8 @@ static void i810_save_2d(struct i810fb_par *par)
 	par->hw_state.pixconf = i810_readl(PIXCONF, mmio);
 	par->hw_state.fw_blc = i810_readl(FW_BLC, mmio);
 	par->hw_state.bltcntl = i810_readw(BLTCNTL, mmio);
-	par->hw_state.hwstam = i810_readw(HWSTAM, mmio); 
-	par->hw_state.hws_pga = i810_readl(HWS_PGA, mmio); 
+	par->hw_state.hwstam = i810_readw(HWSTAM, mmio);
+	par->hw_state.hws_pga = i810_readl(HWS_PGA, mmio);
 	par->hw_state.ier = i810_readw(IER, mmio);
 	par->hw_state.imr = i810_readw(IMR, mmio);
 	par->hw_state.dplystas = i810_readl(DPLYSTAS, mmio);
@@ -669,7 +670,7 @@ static void i810_save_vga_state(struct i810fb_par *par)
 }
 
 /************************************************************
- *                    Helpers                               * 
+ *                    Helpers                               *
  ************************************************************/
 /**
  * get_line_length - calculates buffer pitch in bytes
@@ -678,12 +679,12 @@ static void i810_save_vga_state(struct i810fb_par *par)
  * @bpp: bits per pixel
  *
  * DESCRIPTION:
- * Calculates buffer pitch in bytes.  
+ * Calculates buffer pitch in bytes.
  */
 static u32 get_line_length(struct i810fb_par *par, int xres_virtual, int bpp)
 {
    	u32 length;
-	
+
 	length = xres_virtual*bpp;
 	length = (length+31)&-32;
 	length >>= 3;
@@ -716,17 +717,17 @@ static void i810_calc_dclk(u32 freq, u32 *m, u32 *n, u32 *p)
 	n_target_max = 30;
 
 	/*
-	 * find P such that target freq is 16x reference freq (Hz). 
+	 * find P such that target freq is 16x reference freq (Hz).
 	 */
 	p_divisor = 1;
 	p_target = 0;
-	while(!((1000000 * p_divisor)/(16 * 24 * target_freq)) && 
+	while(!((1000000 * p_divisor)/(16 * 24 * target_freq)) &&
 	      p_divisor <= 32) {
 		p_divisor <<= 1;
 		p_target++;
 	}
 
-	n_reg = m_reg = n_target = 3;	
+	n_reg = m_reg = n_target = 3;
 	while (diff_min && mod_min && (n_target < n_target_max)) {
 		f_out = (p_divisor * n_reg * 1000000)/(4 * 24 * m_reg);
 		mod = (p_divisor * n_reg * 1000000) % (4 * 24 * m_reg);
@@ -744,14 +745,14 @@ static void i810_calc_dclk(u32 freq, u32 *m, u32 *n, u32 *p)
 			diff_min = diff;
 			n_best = n_target;
 			m_best = m_target;
-		}		 
+		}
 
 		if (!diff && mod_min > mod) {
 			mod_min = mod;
 			n_best = n_target;
 			m_best = m_target;
 		}
-	} 
+	}
 	if (m) *m = (m_best - 2) & 0x3FF;
 	if (n) *n = (n_best - 2) & 0x3FF;
 	if (p) *p = (p_target << 4);
@@ -772,7 +773,7 @@ static void i810_calc_dclk(u32 freq, u32 *m, u32 *n, u32 *p)
 static void i810_enable_cursor(u8 __iomem *mmio, int mode)
 {
 	u32 temp;
-	
+
 	temp = i810_readl(PIXCONF, mmio);
 	temp = (mode == ON) ? temp | CURSOR_ENABLE_MASK :
 		temp & ~CURSOR_ENABLE_MASK;
@@ -786,10 +787,10 @@ static void i810_reset_cursor_image(struct i810fb_par *par)
 	int i, j;
 
 	for (i = 64; i--; ) {
-		for (j = 0; j < 8; j++) {             
-			i810_writeb(j, addr, 0xff);   
-			i810_writeb(j+8, addr, 0x00); 
-		}	
+		for (j = 0; j < 8; j++) {
+			i810_writeb(j, addr, 0xff);
+			i810_writeb(j+8, addr, 0x00);
+		}
 		addr +=16;
 	}
 }
@@ -800,9 +801,9 @@ static void i810_load_cursor_image(int width, int height, u8 *data,
 	u8 __iomem *addr = par->cursor_heap.virtual;
 	int i, j, w = width/8;
 	int mod = width % 8, t_mask, d_mask;
-	
+
 	t_mask = 0xff >> mod;
-	d_mask = ~(0xff >> mod); 
+	d_mask = ~(0xff >> mod);
 	for (i = height; i--; ) {
 		for (j = 0; j < w; j++) {
 			i810_writeb(j+0, addr, 0x00);
@@ -854,7 +855,7 @@ static void i810_init_cursor(struct i810fb_par *par)
 	i810_enable_cursor(mmio, OFF);
 	i810_writel(CURBASE, mmio, par->cursor_heap.physical);
 	i810_writew(CURCNTR, mmio, COORD_ACTIVE | CURSOR_MODE_64_XOR);
-}	
+}
 
 /*********************************************************************
  *                    Framebuffer hook helpers                       *
@@ -873,7 +874,7 @@ static void i810_round_off(struct fb_var_screeninfo *var)
 	u32 xres, yres, vxres, vyres;
 
 	/*
-	 *  Presently supports only these configurations 
+	 *  Presently supports only these configurations
 	 */
 
 	xres = var->xres;
@@ -883,20 +884,20 @@ static void i810_round_off(struct fb_var_screeninfo *var)
 
 	var->bits_per_pixel += 7;
 	var->bits_per_pixel &= ~7;
-	
+
 	if (var->bits_per_pixel < 8)
 		var->bits_per_pixel = 8;
-	if (var->bits_per_pixel > 32) 
+	if (var->bits_per_pixel > 32)
 		var->bits_per_pixel = 32;
 
 	round_off_xres(&xres);
 	if (xres < 40)
 		xres = 40;
-	if (xres > 2048) 
+	if (xres > 2048)
 		xres = 2048;
 	xres = (xres + 7) & ~7;
 
-	if (vxres < xres) 
+	if (vxres < xres)
 		vxres = xres;
 
 	round_off_yres(&xres, &yres);
@@ -905,7 +906,7 @@ static void i810_round_off(struct fb_var_screeninfo *var)
 	if (yres >= 2048)
 		yres = 2048;
 
-	if (vyres < yres) 
+	if (vyres < yres)
 		vyres = yres;
 
 	if (var->bits_per_pixel == 32)
@@ -917,30 +918,30 @@ static void i810_round_off(struct fb_var_screeninfo *var)
 	var->hsync_len = (var->hsync_len + 4) & ~7;
 
 	if (var->vmode & FB_VMODE_INTERLACED) {
-		if (!((yres + var->upper_margin + var->vsync_len + 
+		if (!((yres + var->upper_margin + var->vsync_len +
 		       var->lower_margin) & 1))
 			var->upper_margin++;
 	}
-	
+
 	var->xres = xres;
 	var->yres = yres;
 	var->xres_virtual = vxres;
 	var->yres_virtual = vyres;
-}	
+}
 
 /**
  * set_color_bitfields - sets rgba fields
  * @var: pointer to fb_var_screeninfo
  *
  * DESCRIPTION:
- * The length, offset and ordering  for each color field 
- * (red, green, blue)  will be set as specified 
+ * The length, offset and ordering  for each color field
+ * (red, green, blue)  will be set as specified
  * by the hardware
- */  
+ */
 static void set_color_bitfields(struct fb_var_screeninfo *var)
 {
 	switch (var->bits_per_pixel) {
-	case 8:       
+	case 8:
 		var->red.offset = 0;
 		var->red.length = 8;
 		var->green.offset = 0;
@@ -984,11 +985,11 @@ static void set_color_bitfields(struct fb_var_screeninfo *var)
  * @info: pointer to fb_info
  *
  * DESCRIPTION:
- * This will check if the framebuffer size is sufficient 
- * for the current mode and if the user's monitor has the 
+ * This will check if the framebuffer size is sufficient
+ * for the current mode and if the user's monitor has the
  * required specifications to display the current mode.
  */
-static int i810_check_params(struct fb_var_screeninfo *var, 
+static int i810_check_params(struct fb_var_screeninfo *var,
 			     struct fb_info *info)
 {
 	struct i810fb_par *par = info->par;
@@ -1007,14 +1008,14 @@ static int i810_check_params(struct fb_var_screeninfo *var,
 			vyres = info->var.yres;
 			vxres = par->fb.size/vyres;
 			vxres /= var->bits_per_pixel >> 3;
-			line_length = get_line_length(par, vxres, 
+			line_length = get_line_length(par, vxres,
 						      var->bits_per_pixel);
 			vidmem = line_length * info->var.yres;
 			if (vxres < var->xres) {
 				printk("i810fb: required video memory, "
 				       "%d bytes, for %dx%d-%d (virtual) "
-				       "is out of range\n", 
-				       vidmem, vxres, vyres, 
+				       "is out of range\n",
+				       vidmem, vxres, vyres,
 				       var->bits_per_pixel);
 				return -ENOMEM;
 			}
@@ -1074,7 +1075,7 @@ static int i810_check_params(struct fb_var_screeninfo *var,
 	}
 
 	return retval;
-}	
+}
 
 /**
  * encode_fix - fill up fb_fix_screeninfo structure
@@ -1131,9 +1132,9 @@ static int encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
  *
  * DESCRIPTION:
  * Based on the contents of @var, @par will be dynamically filled up.
- * @par contains all information necessary to modify the hardware. 
+ * @par contains all information necessary to modify the hardware.
 */
-static void decode_var(const struct fb_var_screeninfo *var, 
+static void decode_var(const struct fb_var_screeninfo *var,
 		       struct i810fb_par *par)
 {
 	u32 xres, yres, vxres, vyres;
@@ -1175,13 +1176,13 @@ static void decode_var(const struct fb_var_screeninfo *var,
 	if (var->nonstd && var->bits_per_pixel != 8)
 		par->pixconf |= 1 << 27;
 
-	i810_calc_dclk(var->pixclock, &par->regs.M, 
+	i810_calc_dclk(var->pixclock, &par->regs.M,
 		       &par->regs.N, &par->regs.P);
 	i810fb_encode_registers(var, par, xres, yres);
 
 	par->watermark = i810_get_watermark(var, par);
 	par->pitch = get_line_length(par, vxres, var->bits_per_pixel);
-}	
+}
 
 /**
  * i810fb_getcolreg - gets red, green and blue values of the hardware DAC
@@ -1196,7 +1197,7 @@ static void decode_var(const struct fb_var_screeninfo *var,
  * Gets the red, green and blue values of the hardware DAC as pointed by @regno
  * and writes them to @red, @green and @blue respectively
  */
-static int i810fb_getcolreg(u8 regno, u8 *red, u8 *green, u8 *blue, 
+static int i810fb_getcolreg(u8 regno, u8 *red, u8 *green, u8 *blue,
 			    u8 *transp, struct fb_info *info)
 {
 	struct i810fb_par *par = info->par;
@@ -1212,18 +1213,18 @@ static int i810fb_getcolreg(u8 regno, u8 *red, u8 *green, u8 *blue,
 	temp = i810_readb(PIXCONF1, mmio);
 	i810_writeb(PIXCONF1, mmio, temp & ~EXTENDED_PALETTE);
 
-	if (info->fix.visual == FB_VISUAL_DIRECTCOLOR && 
-	    info->var.green.length == 5) 
+	if (info->fix.visual == FB_VISUAL_DIRECTCOLOR &&
+	    info->var.green.length == 5)
 		i810_read_dac(regno * 8, red, green, blue, mmio);
 
-	else if (info->fix.visual == FB_VISUAL_DIRECTCOLOR && 
+	else if (info->fix.visual == FB_VISUAL_DIRECTCOLOR &&
 		 info->var.green.length == 6) {
 		u8 tmp;
 
 		i810_read_dac(regno * 8, red, &tmp, blue, mmio);
 		i810_read_dac(regno * 4, &tmp, green, &tmp, mmio);
 	}
-	else 
+	else
 		i810_read_dac(regno, red, green, blue, mmio);
 
     	*transp = 0;
@@ -1232,7 +1233,7 @@ static int i810fb_getcolreg(u8 regno, u8 *red, u8 *green, u8 *blue,
     	return 0;
 }
 
-/****************************************************************** 
+/******************************************************************
  *           Framebuffer device-specific hooks                    *
  ******************************************************************/
 
@@ -1252,7 +1253,7 @@ static int i810fb_open(struct fb_info *info, int user)
 
 	par->use_count++;
 	mutex_unlock(&par->open_lock);
-	
+
 	return 0;
 }
 
@@ -1273,13 +1274,13 @@ static int i810fb_release(struct fb_info *info, int user)
 
 	par->use_count--;
 	mutex_unlock(&par->open_lock);
-	
+
 	return 0;
 }
 
 
-static int i810fb_setcolreg(unsigned regno, unsigned red, unsigned green, 
-			    unsigned blue, unsigned transp, 
+static int i810fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			    unsigned blue, unsigned transp,
 			    struct fb_info *info)
 {
 	struct i810fb_par *par = info->par;
@@ -1302,24 +1303,24 @@ static int i810fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	temp = i810_readb(PIXCONF1, mmio);
 	i810_writeb(PIXCONF1, mmio, temp & ~EXTENDED_PALETTE);
 
-	if (info->fix.visual == FB_VISUAL_DIRECTCOLOR && 
+	if (info->fix.visual == FB_VISUAL_DIRECTCOLOR &&
 	    info->var.green.length == 5) {
-		for (i = 0; i < 8; i++) 
-			i810_write_dac((u8) (regno * 8) + i, (u8) red, 
+		for (i = 0; i < 8; i++)
+			i810_write_dac((u8) (regno * 8) + i, (u8) red,
 				       (u8) green, (u8) blue, mmio);
-	} else if (info->fix.visual == FB_VISUAL_DIRECTCOLOR && 
+	} else if (info->fix.visual == FB_VISUAL_DIRECTCOLOR &&
 		 info->var.green.length == 6) {
 		u8 r, g, b;
 
 		if (regno < 32) {
-			for (i = 0; i < 8; i++) 
+			for (i = 0; i < 8; i++)
 				i810_write_dac((u8) (regno * 8) + i,
-					       (u8) red, (u8) green, 
+					       (u8) red, (u8) green,
 					       (u8) blue, mmio);
 		}
 		i810_read_dac((u8) (regno*4), &r, &g, &b, mmio);
-		for (i = 0; i < 4; i++) 
-			i810_write_dac((u8) (regno*4) + i, r, (u8) green, 
+		for (i = 0; i < 4; i++)
+			i810_write_dac((u8) (regno*4) + i, r, (u8) green,
 				       b, mmio);
 	} else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
 		i810_write_dac((u8) regno, (u8) red, (u8) green,
@@ -1330,20 +1331,20 @@ static int i810fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 
 	if (regno < 16) {
 		switch (info->var.bits_per_pixel) {
-		case 16:	
+		case 16:
 			if (info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
-				if (info->var.green.length == 5) 
-					((u32 *)info->pseudo_palette)[regno] = 
+				if (info->var.green.length == 5)
+					((u32 *)info->pseudo_palette)[regno] =
 						(regno << 10) | (regno << 5) |
 						regno;
 				else
-					((u32 *)info->pseudo_palette)[regno] = 
+					((u32 *)info->pseudo_palette)[regno] =
 						(regno << 11) | (regno << 5) |
 						regno;
 			} else {
 				if (info->var.green.length == 5) {
 					/* RGB 555 */
-					((u32 *)info->pseudo_palette)[regno] = 
+					((u32 *)info->pseudo_palette)[regno] =
 						((red & 0xf800) >> 1) |
 						((green & 0xf800) >> 6) |
 						((blue & 0xf800) >> 11);
@@ -1358,12 +1359,12 @@ static int i810fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			break;
 		case 24:	/* RGB 888 */
 		case 32:	/* RGBA 8888 */
-			if (info->fix.visual == FB_VISUAL_DIRECTCOLOR) 
-				((u32 *)info->pseudo_palette)[regno] = 
+			if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
+				((u32 *)info->pseudo_palette)[regno] =
 					(regno << 16) | (regno << 8) |
 					regno;
-			else 
-				((u32 *)info->pseudo_palette)[regno] = 
+			else
+				((u32 *)info->pseudo_palette)[regno] =
 					((red & 0xff00) << 8) |
 					(green & 0xff00) |
 					((blue & 0xff00) >> 8);
@@ -1373,13 +1374,13 @@ static int i810fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	return 0;
 }
 
-static int i810fb_pan_display(struct fb_var_screeninfo *var, 
+static int i810fb_pan_display(struct fb_var_screeninfo *var,
 			      struct fb_info *info)
 {
 	struct i810fb_par *par = info->par;
 	u32 total;
-	
-	total = var->xoffset * par->depth + 
+
+	total = var->xoffset * par->depth +
 		var->yoffset * info->fix.line_length;
 	i810fb_load_front(total, info);
 
@@ -1391,7 +1392,7 @@ static int i810fb_blank (int blank_mode, struct fb_info *info)
 	struct i810fb_par *par = info->par;
 	u8 __iomem *mmio = par->mmio_start_virtual;
 	int mode = 0, pwr, scr_off = 0;
-	
+
 	pwr = i810_readl(PWR_CLKC, mmio);
 
 	switch (blank_mode) {
@@ -1421,7 +1422,7 @@ static int i810fb_blank (int blank_mode, struct fb_info *info)
 		scr_off = OFF;
 		break;
 	default:
-		return -EINVAL; 
+		return -EINVAL;
 	}
 
 	i810_screen_off(mmio, scr_off);
@@ -1452,7 +1453,7 @@ static int i810fb_set_par(struct fb_info *info)
 	return 0;
 }
 
-static int i810fb_check_var(struct fb_var_screeninfo *var, 
+static int i810fb_check_var(struct fb_var_screeninfo *var,
 			    struct fb_info *info)
 {
 	int err;
@@ -1550,7 +1551,7 @@ static const struct fb_ops i810fb_ops = {
 	.fb_set_par =        i810fb_set_par,
 	.fb_setcolreg =      i810fb_setcolreg,
 	.fb_blank =          i810fb_blank,
-	.fb_pan_display =    i810fb_pan_display, 
+	.fb_pan_display =    i810fb_pan_display,
 	.fb_fillrect =       i810fb_fillrect,
 	.fb_copyarea =       i810fb_copyarea,
 	.fb_imageblit =      i810fb_imageblit,
@@ -1593,7 +1594,7 @@ static int i810fb_suspend(struct pci_dev *dev, pm_message_t mesg)
 	return 0;
 }
 
-static int i810fb_resume(struct pci_dev *dev) 
+static int i810fb_resume(struct pci_dev *dev)
 {
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct i810fb_par *par = info->par;
@@ -1628,14 +1629,14 @@ fail:
 /***********************************************************************
  *                  AGP resource allocation                            *
  ***********************************************************************/
-  
+
 static void i810_fix_pointers(struct i810fb_par *par)
 {
       	par->fb.physical = par->aperture.physical+(par->fb.offset << 12);
 	par->fb.virtual = par->aperture.virtual+(par->fb.offset << 12);
-	par->iring.physical = par->aperture.physical + 
+	par->iring.physical = par->aperture.physical +
 		(par->iring.offset << 12);
-	par->iring.virtual = par->aperture.virtual + 
+	par->iring.virtual = par->aperture.virtual +
 		(par->iring.offset << 12);
 	par->cursor_heap.virtual = par->aperture.virtual+
 		(par->cursor_heap.offset << 12);
@@ -1666,7 +1667,7 @@ static int i810_alloc_agp_mem(struct fb_info *info)
 	struct i810fb_par *par = info->par;
 	int size;
 	struct agp_bridge_data *bridge;
-	
+
 	i810_fix_offsets(par);
 	size = par->fb.size + par->iring.size;
 
@@ -1674,7 +1675,7 @@ static int i810_alloc_agp_mem(struct fb_info *info)
 		printk("i810fb_alloc_fbmem: cannot acquire agpgart\n");
 		return -ENODEV;
 	}
-	if (!(par->i810_gtt.i810_fb_memory = 
+	if (!(par->i810_gtt.i810_fb_memory =
 	      agp_allocate_memory(bridge, size >> 12, AGP_NORMAL_MEMORY))) {
 		printk("i810fb_alloc_fbmem: can't allocate framebuffer "
 		       "memory\n");
@@ -1686,9 +1687,9 @@ static int i810_alloc_agp_mem(struct fb_info *info)
 		printk("i810fb_alloc_fbmem: can't bind framebuffer memory\n");
 		agp_backend_release(bridge);
 		return -EBUSY;
-	}	
-	
-	if (!(par->i810_gtt.i810_cursor_memory = 
+	}
+
+	if (!(par->i810_gtt.i810_cursor_memory =
 	      agp_allocate_memory(bridge, par->cursor_heap.size >> 12,
 				  AGP_PHYSICAL_MEMORY))) {
 		printk("i810fb_alloc_cursormem:  can't allocate "
@@ -1701,7 +1702,7 @@ static int i810_alloc_agp_mem(struct fb_info *info)
 		printk("i810fb_alloc_cursormem: cannot bind cursor memory\n");
 		agp_backend_release(bridge);
 		return -EBUSY;
-	}	
+	}
 
 	par->cursor_heap.physical = par->i810_gtt.i810_cursor_memory->physical;
 
@@ -1712,8 +1713,8 @@ static int i810_alloc_agp_mem(struct fb_info *info)
 	return 0;
 }
 
-/*************************************************************** 
- *                    Initialization                           * 
+/***************************************************************
+ *                    Initialization                           *
  ***************************************************************/
 
 /**
@@ -1728,7 +1729,7 @@ static void i810_init_monspecs(struct fb_info *info)
 {
 	if (!hsync1)
 		hsync1 = HFMIN;
-	if (!hsync2) 
+	if (!hsync2)
 		hsync2 = HFMAX;
 	if (!info->monspecs.hfmax)
 		info->monspecs.hfmax = hsync2;
@@ -1739,7 +1740,7 @@ static void i810_init_monspecs(struct fb_info *info)
 
 	if (!vsync1)
 		vsync1 = VFMIN;
-	if (!vsync2) 
+	if (!vsync2)
 		vsync2 = VFMAX;
 	if (IS_DVT && vsync1 < 60)
 		vsync1 = 60;
@@ -1747,7 +1748,7 @@ static void i810_init_monspecs(struct fb_info *info)
 		info->monspecs.vfmax = vsync2;
 	if (!info->monspecs.vfmin)
 		info->monspecs.vfmin = vsync1;
-	if (vsync2 < vsync1) 
+	if (vsync2 < vsync1)
 		info->monspecs.vfmin = vsync2;
 }
 
@@ -1760,27 +1761,27 @@ static void i810_init_defaults(struct i810fb_par *par, struct fb_info *info)
 {
 	mutex_init(&par->open_lock);
 
-	if (voffset) 
+	if (voffset)
 		v_offset_default = voffset;
 	else if (par->aperture.size > 32 * 1024 * 1024)
 		v_offset_default = 16;
 	else
 		v_offset_default = 8;
 
-	if (!vram) 
+	if (!vram)
 		vram = 1;
 
-	if (accel) 
+	if (accel)
 		par->dev_flags |= HAS_ACCELERATION;
 
-	if (sync) 
+	if (sync)
 		par->dev_flags |= ALWAYS_SYNC;
 
 	par->ddc_num = (ddc3 ? 3 : 2);
 
 	if (bpp < 8)
 		bpp = 8;
-	
+
 	par->i810fb_ops = i810fb_ops;
 
 	if (xres)
@@ -1793,7 +1794,7 @@ static void i810_init_defaults(struct i810fb_par *par, struct fb_info *info)
 	else
 		info->var.yres = 480;
 
-	if (!vyres) 
+	if (!vyres)
 		vyres = (vram << 20)/(info->var.xres*bpp >> 3);
 
 	info->var.yres_virtual = vyres;
@@ -1802,12 +1803,12 @@ static void i810_init_defaults(struct i810fb_par *par, struct fb_info *info)
 	if (dcolor)
 		info->var.nonstd = 1;
 
-	if (par->dev_flags & HAS_ACCELERATION) 
+	if (par->dev_flags & HAS_ACCELERATION)
 		info->var.accel_flags = 1;
 
 	i810_init_monspecs(info);
 }
-	
+
 /**
  * i810_init_device - initialize device
  * @par: pointer to i810fb_par structure
@@ -1840,9 +1841,9 @@ static int i810_allocate_pci_resource(struct i810fb_par *par,
 {
 	int err;
 
-	if ((err = pci_enable_device(par->dev))) { 
+	if ((err = pci_enable_device(par->dev))) {
 		printk("i810fb_init: cannot enable device\n");
-		return err;		
+		return err;
 	}
 	par->res_flags |= PCI_DEVICE_ENABLED;
 
@@ -1860,8 +1861,8 @@ static int i810_allocate_pci_resource(struct i810fb_par *par,
 		return -ENOMEM;
 	}
 
-	if (!request_mem_region(par->aperture.physical, 
-				par->aperture.size, 
+	if (!request_mem_region(par->aperture.physical,
+				par->aperture.size,
 				i810_pci_list[entry->driver_data])) {
 		printk("i810fb_init: cannot request framebuffer region\n");
 		return -ENODEV;
@@ -1874,16 +1875,16 @@ static int i810_allocate_pci_resource(struct i810fb_par *par,
 		printk("i810fb_init: cannot remap framebuffer region\n");
 		return -ENODEV;
 	}
-  
-	if (!request_mem_region(par->mmio_start_phys, 
-				MMIO_SIZE, 
+
+	if (!request_mem_region(par->mmio_start_phys,
+				MMIO_SIZE,
 				i810_pci_list[entry->driver_data])) {
 		printk("i810fb_init: cannot request mmio region\n");
 		return -ENODEV;
 	}
 	par->res_flags |= MMIO_REQ;
 
-	par->mmio_start_virtual = ioremap(par->mmio_start_phys, 
+	par->mmio_start_virtual = ioremap(par->mmio_start_phys,
 						  MMIO_SIZE);
 	if (!par->mmio_start_virtual) {
 		printk("i810fb_init: cannot remap mmio region\n");
@@ -1963,7 +1964,7 @@ static int i810fb_setup(char *options)
 
 	if (!options || !*options)
 		return 0;
-	
+
 	while ((this_opt = strsep(&options, ",")) != NULL) {
 		if (!strncmp(this_opt, "mtrr", 4))
 			mtrr = true;
@@ -1987,13 +1988,13 @@ static int i810fb_setup(char *options)
 			bpp = simple_strtoul(this_opt+4, NULL, 0);
 		else if (!strncmp(this_opt, "hsync1:", 7)) {
 			hsync1 = simple_strtoul(this_opt+7, &suffix, 0);
-			if (strncmp(suffix, "H", 1)) 
+			if (strncmp(suffix, "H", 1))
 				hsync1 *= 1000;
 		} else if (!strncmp(this_opt, "hsync2:", 7)) {
 			hsync2 = simple_strtoul(this_opt+7, &suffix, 0);
-			if (strncmp(suffix, "H", 1)) 
+			if (strncmp(suffix, "H", 1))
 				hsync2 *= 1000;
-		} else if (!strncmp(this_opt, "vsync1:", 7)) 
+		} else if (!strncmp(this_opt, "vsync1:", 7))
 			vsync1 = simple_strtoul(this_opt+7, NULL, 0);
 		else if (!strncmp(this_opt, "vsync2:", 7))
 			vsync2 = simple_strtoul(this_opt+7, NULL, 0);
@@ -2016,6 +2017,10 @@ static int i810fb_init_pci(struct pci_dev *dev,
 	struct fb_videomode mode;
 	int err = -1, vfreq, hfreq, pixclock;
 
+	err = aperture_remove_conflicting_pci_devices(dev, "i810fb");
+	if (err)
+		return err;
+
 	info = framebuffer_alloc(sizeof(struct i810fb_par), &dev->dev);
 	if (!info)
 		return -ENOMEM;
@@ -2044,7 +2049,7 @@ static int i810fb_init_pci(struct pci_dev *dev,
 		return err;
 	}
 
-	i810_init_device(par);        
+	i810_init_device(par);
 
 	info->screen_base = par->fb.virtual;
 	info->fbops = &par->i810fb_ops;
@@ -2064,21 +2069,21 @@ static int i810fb_init_pci(struct pci_dev *dev,
 	err = register_framebuffer(info);
 
 	if (err < 0) {
-    		i810fb_release_resource(info, par); 
+    		i810fb_release_resource(info, par);
 		printk("i810fb_init: cannot register framebuffer device\n");
-    		return err;  
-    	}   
+    		return err;
+    	}
 
 	pci_set_drvdata(dev, info);
 	pixclock = 1000000000/(info->var.pixclock);
 	pixclock *= 1000;
-	hfreq = pixclock/(info->var.xres + info->var.left_margin + 
+	hfreq = pixclock/(info->var.xres + info->var.left_margin +
 			  info->var.hsync_len + info->var.right_margin);
 	vfreq = hfreq/(info->var.yres + info->var.upper_margin +
 		       info->var.vsync_len + info->var.lower_margin);
 
       	printk("I810FB: fb%d         : %s v%d.%d.%d%s\n"
-      	       "I810FB: Video RAM   : %dK\n" 
+      	       "I810FB: Video RAM   : %dK\n"
 	       "I810FB: Monitor     : H: %d-%d KHz V: %d-%d Hz\n"
 	       "I810FB: Mode        : %dx%d-%dbpp@%dHz\n",
 	       info->node,
@@ -2086,7 +2091,7 @@ static int i810fb_init_pci(struct pci_dev *dev,
 	       VERSION_MAJOR, VERSION_MINOR, VERSION_TEENIE, BRANCH_VERSION,
 	       (int) par->fb.size>>10, info->monspecs.hfmin/1000,
 	       info->monspecs.hfmax/1000, info->monspecs.vfmin,
-	       info->monspecs.vfmax, info->var.xres, 
+	       info->monspecs.vfmax, info->var.xres,
 	       info->var.yres, info->var.bits_per_pixel, vfreq);
 	return 0;
 }
@@ -2095,7 +2100,7 @@ static int i810fb_init_pci(struct pci_dev *dev,
  *                     De-initialization                        *
  ***************************************************************/
 
-static void i810fb_release_resource(struct fb_info *info, 
+static void i810fb_release_resource(struct fb_info *info,
 				    struct i810fb_par *par)
 {
 	struct gtt_data *gtt = &par->i810_gtt;
@@ -2128,10 +2133,10 @@ static void i810fb_remove_pci(struct pci_dev *dev)
 	struct fb_info *info = pci_get_drvdata(dev);
 	struct i810fb_par *par = info->par;
 
-	unregister_framebuffer(info);  
+	unregister_framebuffer(info);
 	i810fb_release_resource(info, par);
 	printk("cleanup_module:  unloaded i810 framebuffer device\n");
-}                                                	
+}
 
 #ifndef MODULE
 static int i810fb_init(void)
@@ -2144,7 +2149,7 @@ static int i810fb_init(void)
 
 	return pci_register_driver(&i810fb_driver);
 }
-#endif 
+#endif
 
 /*********************************************************************
  *                          Modularization                           *
@@ -2161,7 +2166,7 @@ static int i810fb_init(void)
 }
 
 module_param(vram, int, 0);
-MODULE_PARM_DESC(vram, "System RAM to allocate to framebuffer in MiB" 
+MODULE_PARM_DESC(vram, "System RAM to allocate to framebuffer in MiB"
 		 " (default=4)");
 module_param(voffset, int, 0);
 MODULE_PARM_DESC(voffset, "at what offset to place start of framebuffer "
@@ -2186,7 +2191,7 @@ module_param(vsync1, int, 0);
 MODULE_PARM_DESC(vsync1, "Minimum vertical frequency of monitor in Hz"
 		 " (default = 50)");
 module_param(vsync2, int, 0);
-MODULE_PARM_DESC(vsync2, "Maximum vertical frequency of monitor in Hz" 
+MODULE_PARM_DESC(vsync2, "Maximum vertical frequency of monitor in Hz"
 		 " (default = 60)");
 module_param(accel, bool, 0);
 MODULE_PARM_DESC(accel, "Use Acceleration (BLIT) engine (default = 0)");
@@ -2208,7 +2213,7 @@ MODULE_PARM_DESC(mode_option, "Specify initial video mode");
 MODULE_AUTHOR("Tony A. Daplas");
 MODULE_DESCRIPTION("Framebuffer device for the Intel 810/815 and"
 		   " compatible cards");
-MODULE_LICENSE("GPL"); 
+MODULE_LICENSE("GPL");
 
 static void __exit i810fb_exit(void)
 {
diff --git a/drivers/video/fbdev/imsttfb.c b/drivers/video/fbdev/imsttfb.c
index 16f272a50811..d7edb9c5d3a3 100644
--- a/drivers/video/fbdev/imsttfb.c
+++ b/drivers/video/fbdev/imsttfb.c
@@ -16,6 +16,7 @@
  *  more details.
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -86,7 +87,7 @@ enum {
 	SSTATUS	= 36, /* 0x90 */
 	PRC	= 37, /* 0x94 */
 
-#if 0	
+#if 0
 	/* PCI Registers */
 	DVID	= 0x00000000L,
 	SC	= 0x00000004L,
@@ -103,8 +104,8 @@ enum {
 	PDATA	= 0x04,
 	PPMASK	= 0x08,
 	PADDRR	= 0x0c,
-	PIDXLO	= 0x10,	
-	PIDXHI	= 0x14,	
+	PIDXLO	= 0x10,
+	PIDXHI	= 0x14,
 	PIDXDATA= 0x18,
 	PIDXCTL	= 0x1c
 };
@@ -131,7 +132,7 @@ enum {
 	SYSCLKC		= 0x18,	/* () System Clock C */
 	/*
 	 * Dot clock rate is 20MHz * (m + 1) / ((n + 1) * (p ? 2 * p : 1)
-	 * c is charge pump bias which depends on the VCO frequency  
+	 * c is charge pump bias which depends on the VCO frequency
 	 */
 	PIXM0		= 0x20,	/* () Pixel M 0 */
 	PIXN0		= 0x21,	/* () Pixel N 0 */
@@ -320,7 +321,7 @@ struct imstt_par {
 	__u32 ramdac;
 	__u32 palette[16];
 };
- 
+
 enum {
 	IBM = 0,
 	TVP = 1
@@ -373,7 +374,7 @@ static struct imstt_regvals tvp_reg_init_17 = {
 
 static struct imstt_regvals tvp_reg_init_18 = {
 	1152,
-  	0x0009, 0x0011, 0x059, 0x5b, 0x0003, 0x0031, 0x0397, 0x039a, 0x0000, 
+  	0x0009, 0x0011, 0x059, 0x5b, 0x0003, 0x0031, 0x0397, 0x039a, 0x0000,
 	0xfd, 0x3a, 0xf1,
 	{ 0x39, 0x38, 0x38 }, { 0xf3, 0xf3, 0xf2 }
 };
@@ -856,10 +857,10 @@ imsttfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 }
 
 static int
-imsttfb_set_par(struct fb_info *info) 
+imsttfb_set_par(struct fb_info *info)
 {
 	struct imstt_par *par = info->par;
-		
+
 	if (!compute_imstt_regvals(par, info->var.xres, info->var.yres))
 		return -EINVAL;
 
@@ -930,7 +931,7 @@ imsttfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 	return 0;
 }
 
-static int 
+static int
 imsttfb_blank(int blank, struct fb_info *info)
 {
 	struct imstt_par *par = info->par;
@@ -986,7 +987,7 @@ imsttfb_blank(int blank, struct fb_info *info)
 
 static void
 imsttfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
-{ 
+{
 	struct imstt_par *par = info->par;
 	__u32 Bpp, line_pitch, bgc, dx, dy, width, height;
 
@@ -1192,7 +1193,7 @@ imstt_set_cursor(struct imstt_par *par, struct fb_image *d, int on)
 	}
 }
 
-static int 
+static int
 imsttfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
 	struct imstt_par *par = info->par;
@@ -1200,7 +1201,7 @@ imsttfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 
 	if (cursor->dest == NULL && cursor->rop == ROP_XOR)
 		return 1;
-	
+
 	imstt_set_cursor(info, cursor, 0);
 
 	if (flags & FB_CUR_SETPOS) {
@@ -1469,8 +1470,13 @@ static int imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct imstt_par *par;
 	struct fb_info *info;
 	struct device_node *dp;
-	int ret = -ENOMEM;
-	
+	int ret;
+
+	ret = aperture_remove_conflicting_pci_devices(pdev, "imsttfb");
+	if (ret)
+		return ret;
+	ret = -ENOMEM;
+
 	dp = pci_device_to_OF_node(pdev);
 	if(dp)
 		printk(KERN_INFO "%s: OF name %pOFn\n",__func__, dp);
@@ -1619,7 +1625,7 @@ static int __init imsttfb_init(void)
 #endif
 	return pci_register_driver(&imsttfb_pci_driver);
 }
- 
+
 static void __exit imsttfb_exit(void)
 {
 	pci_unregister_driver(&imsttfb_pci_driver);
diff --git a/drivers/video/fbdev/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c
index 5647fca8c49a..d4a2891a9a7a 100644
--- a/drivers/video/fbdev/intelfb/intelfbdrv.c
+++ b/drivers/video/fbdev/intelfb/intelfbdrv.c
@@ -107,6 +107,7 @@
  *              Add support for 945GME. (Phil Endecott <spam_from_intelfb@chezphil.org>)
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -483,6 +484,10 @@ static int intelfb_pci_register(struct pci_dev *pdev,
 
 	DBG_MSG("intelfb_pci_register\n");
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "intelfb");
+	if (err)
+		return err;
+
 	num_registered++;
 	if (num_registered != 1) {
 		ERR_MSG("Attempted to register %d devices "
diff --git a/drivers/video/fbdev/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c
index d57772f96ad2..b4b93054c520 100644
--- a/drivers/video/fbdev/kyro/fbdev.c
+++ b/drivers/video/fbdev/kyro/fbdev.c
@@ -9,6 +9,7 @@
  * for more details.
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
@@ -676,6 +677,10 @@ static int kyrofb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	unsigned long size;
 	int err;
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "kyrofb");
+	if (err)
+		return err;
+
 	if ((err = pci_enable_device(pdev))) {
 		printk(KERN_WARNING "kyrofb: Can't enable pdev: %d\n", err);
 		return err;
diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index 68bba2688f4c..775d34115e2d 100644
--- a/drivers/video/fbdev/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
@@ -100,6 +100,7 @@
  *
  */
 
+#include <linux/aperture.h>
 #include <linux/version.h>
 
 #include "matroxfb_base.h"
@@ -2044,6 +2045,10 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm
 	u_int32_t cmd;
 	DBG(__func__)
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "matroxfb");
+	if (err)
+		return err;
+
 	svid = pdev->subsystem_vendor;
 	sid = pdev->subsystem_device;
 	for (b = dev_list; b->vendor; b++) {
diff --git a/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
index a7508f5be343..96800c9c9cd9 100644
--- a/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
+++ b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
@@ -10,6 +10,7 @@
 
 #undef DEBUG
 
+#include <linux/aperture.h>
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <linux/uaccess.h>
@@ -999,6 +1000,10 @@ static int mb862xx_pci_probe(struct pci_dev *pdev,
 	struct device *dev = &pdev->dev;
 	int ret;
 
+	ret = aperture_remove_conflicting_pci_devices(pdev, "mb862xxfb");
+	if (ret)
+		return ret;
+
 	ret = pci_enable_device(pdev);
 	if (ret < 0) {
 		dev_err(dev, "Cannot enable PCI device\n");
diff --git a/drivers/video/fbdev/neofb.c b/drivers/video/fbdev/neofb.c
index 28d32cbf496b..93a2d2d1abe8 100644
--- a/drivers/video/fbdev/neofb.c
+++ b/drivers/video/fbdev/neofb.c
@@ -23,9 +23,9 @@
  *
  * 0.3.3
  *  - Porting over to new fbdev api. (jsimmons)
- *  
+ *
  * 0.3.2
- *  - got rid of all floating point (dok) 
+ *  - got rid of all floating point (dok)
  *
  * 0.3.1
  *  - added module license (dok)
@@ -54,6 +54,7 @@
  *
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -1154,14 +1155,14 @@ static int neofb_set_par(struct fb_info *info)
 
 	switch (info->fix.accel) {
 		case FB_ACCEL_NEOMAGIC_NM2200:
-		case FB_ACCEL_NEOMAGIC_NM2230: 
-		case FB_ACCEL_NEOMAGIC_NM2360: 
-		case FB_ACCEL_NEOMAGIC_NM2380: 
+		case FB_ACCEL_NEOMAGIC_NM2230:
+		case FB_ACCEL_NEOMAGIC_NM2360:
+		case FB_ACCEL_NEOMAGIC_NM2380:
 			neo2200_accel_init(info, &info->var);
 			break;
 		default:
 			break;
-	}	
+	}
 	return 0;
 }
 
@@ -1493,15 +1494,15 @@ neofb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 {
 	switch (info->fix.accel) {
 		case FB_ACCEL_NEOMAGIC_NM2200:
-		case FB_ACCEL_NEOMAGIC_NM2230: 
-		case FB_ACCEL_NEOMAGIC_NM2360: 
+		case FB_ACCEL_NEOMAGIC_NM2230:
+		case FB_ACCEL_NEOMAGIC_NM2360:
 		case FB_ACCEL_NEOMAGIC_NM2380:
 			neo2200_fillrect(info, rect);
 			break;
 		default:
 			cfb_fillrect(info, rect);
 			break;
-	}	
+	}
 }
 
 static void
@@ -1509,15 +1510,15 @@ neofb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 {
 	switch (info->fix.accel) {
 		case FB_ACCEL_NEOMAGIC_NM2200:
-		case FB_ACCEL_NEOMAGIC_NM2230: 
-		case FB_ACCEL_NEOMAGIC_NM2360: 
-		case FB_ACCEL_NEOMAGIC_NM2380: 
+		case FB_ACCEL_NEOMAGIC_NM2230:
+		case FB_ACCEL_NEOMAGIC_NM2360:
+		case FB_ACCEL_NEOMAGIC_NM2380:
 			neo2200_copyarea(info, area);
 			break;
 		default:
 			cfb_copyarea(info, area);
 			break;
-	}	
+	}
 }
 
 static void
@@ -1536,20 +1537,20 @@ neofb_imageblit(struct fb_info *info, const struct fb_image *image)
 	}
 }
 
-static int 
+static int
 neofb_sync(struct fb_info *info)
 {
 	switch (info->fix.accel) {
 		case FB_ACCEL_NEOMAGIC_NM2200:
-		case FB_ACCEL_NEOMAGIC_NM2230: 
-		case FB_ACCEL_NEOMAGIC_NM2360: 
-		case FB_ACCEL_NEOMAGIC_NM2380: 
+		case FB_ACCEL_NEOMAGIC_NM2230:
+		case FB_ACCEL_NEOMAGIC_NM2360:
+		case FB_ACCEL_NEOMAGIC_NM2380:
 			neo2200_sync(info);
 			break;
 		default:
 			break;
 	}
-	return 0;		
+	return 0;
 }
 
 /*
@@ -2029,6 +2030,10 @@ static int neofb_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	DBG("neofb_probe");
 
+	err = aperture_remove_conflicting_pci_devices(dev, "neofb");
+	if (err)
+		return err;
+
 	err = pci_enable_device(dev);
 	if (err)
 		return err;
diff --git a/drivers/video/fbdev/nvidia/nvidia.c b/drivers/video/fbdev/nvidia/nvidia.c
index a372a183c1f0..329e2e8133c6 100644
--- a/drivers/video/fbdev/nvidia/nvidia.c
+++ b/drivers/video/fbdev/nvidia/nvidia.c
@@ -9,6 +9,7 @@
  *
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -1276,11 +1277,15 @@ static int nvidiafb_probe(struct pci_dev *pd, const struct pci_device_id *ent)
 	struct nvidia_par *par;
 	struct fb_info *info;
 	unsigned short cmd;
-
+	int ret;
 
 	NVTRACE_ENTER();
 	assert(pd != NULL);
 
+	ret = aperture_remove_conflicting_pci_devices(pd, "nvidiafb");
+	if (ret)
+		return ret;
+
 	info = framebuffer_alloc(sizeof(struct nvidia_par), &pd->dev);
 
 	if (!info)
diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index 8fd79deb1e2a..7da715d31a93 100644
--- a/drivers/video/fbdev/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
@@ -27,6 +27,7 @@
  *
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -1521,6 +1522,10 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	int err;
 	int retval = -ENXIO;
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "pm2fb");
+	if (err)
+		return err;
+
 	err = pci_enable_device(pdev);
 	if (err) {
 		printk(KERN_WARNING "pm2fb: Can't enable pdev: %d\n", err);
diff --git a/drivers/video/fbdev/pm3fb.c b/drivers/video/fbdev/pm3fb.c
index a8faf46adeb1..ba69846d444f 100644
--- a/drivers/video/fbdev/pm3fb.c
+++ b/drivers/video/fbdev/pm3fb.c
@@ -22,6 +22,7 @@
  *
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -1315,6 +1316,10 @@ static int pm3fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	int err;
 	int retval = -ENXIO;
 
+	err = aperture_remove_conflicting_pci_devices(dev, "pm3fb");
+	if (err)
+		return err;
+
 	err = pci_enable_device(dev);
 	if (err) {
 		printk(KERN_WARNING "pm3fb: Can't enable PCI dev: %d\n", err);
diff --git a/drivers/video/fbdev/pvr2fb.c b/drivers/video/fbdev/pvr2fb.c
index f4add36cb5f4..b73ad14efa20 100644
--- a/drivers/video/fbdev/pvr2fb.c
+++ b/drivers/video/fbdev/pvr2fb.c
@@ -45,6 +45,7 @@
 
 #undef DEBUG
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -942,6 +943,10 @@ static int pvr2fb_pci_probe(struct pci_dev *pdev,
 {
 	int ret;
 
+	ret = aperture_remove_conflicting_pci_devices(pdev, "pvrfb");
+	if (ret)
+		return ret;
+
 	ret = pci_enable_device(pdev);
 	if (ret) {
 		printk(KERN_ERR "pvr2fb: PCI enable failed\n");
diff --git a/drivers/video/fbdev/riva/fbdev.c b/drivers/video/fbdev/riva/fbdev.c
index 84d5e23ad7d3..0ea74e28f915 100644
--- a/drivers/video/fbdev/riva/fbdev.c
+++ b/drivers/video/fbdev/riva/fbdev.c
@@ -29,6 +29,7 @@
  *	doublescan modes are broken
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -474,7 +475,7 @@ static inline void reverse_order(u32 *l)
  * DESCRIPTiON:
  * Loads cursor image based on a monochrome source and mask bitmap.  The
  * image bits determines the color of the pixel, 0 for background, 1 for
- * foreground.  Only the affected region (as determined by @w and @h 
+ * foreground.  Only the affected region (as determined by @w and @h
  * parameters) will be updated.
  *
  * CALLED FROM:
@@ -494,7 +495,7 @@ static void rivafb_load_cursor_image(struct riva_par *par, u8 *data8,
 	for (i = 0; i < h; i++) {
 		b = *data++;
 		reverse_order(&b);
-		
+
 		for (j = 0; j < w/2; j++) {
 			tmp = 0;
 #if defined (__BIG_ENDIAN)
@@ -562,7 +563,7 @@ static void riva_rclut(RIVA_HW_INST *chip,
 		       unsigned char regnum, unsigned char *red,
 		       unsigned char *green, unsigned char *blue)
 {
-	
+
 	VGA_WR08(chip->PDIO, 0x3c7, regnum);
 	*red = VGA_RD08(chip->PDIO, 0x3c9);
 	*green = VGA_RD08(chip->PDIO, 0x3c9);
@@ -673,7 +674,7 @@ static int riva_load_video_mode(struct fb_info *info)
 	int rc;
 	struct riva_par *par = info->par;
 	struct riva_regs newmode;
-	
+
 	NVTRACE_ENTER();
 	/* time to calculate */
 	rivafb_blank(FB_BLANK_NORMAL, info);
@@ -717,7 +718,7 @@ static int riva_load_video_mode(struct fb_info *info)
 		hBlankEnd = hTotal + 4;
 	}
 
-	newmode.crtc[0x0] = Set8Bits (hTotal); 
+	newmode.crtc[0x0] = Set8Bits (hTotal);
 	newmode.crtc[0x1] = Set8Bits (hDisplay);
 	newmode.crtc[0x2] = Set8Bits (hBlankStart);
 	newmode.crtc[0x3] = SetBitField (hBlankEnd, 4: 0, 4:0) | SetBit (7);
@@ -748,20 +749,20 @@ static int riva_load_video_mode(struct fb_info *info)
 		| SetBitField(vStart,10:10,2:2)
 		| SetBitField(vDisplay,10:10,1:1)
 		| SetBitField(vTotal,10:10,0:0);
-	newmode.ext.horiz  = SetBitField(hTotal,8:8,0:0) 
+	newmode.ext.horiz  = SetBitField(hTotal,8:8,0:0)
 		| SetBitField(hDisplay,8:8,1:1)
 		| SetBitField(hBlankStart,8:8,2:2)
 		| SetBitField(hStart,8:8,3:3);
 	newmode.ext.extra  = SetBitField(vTotal,11:11,0:0)
 		| SetBitField(vDisplay,11:11,2:2)
 		| SetBitField(vStart,11:11,4:4)
-		| SetBitField(vBlankStart,11:11,6:6); 
+		| SetBitField(vBlankStart,11:11,6:6);
 
 	if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
 		int tmp = (hTotal >> 1) & ~1;
 		newmode.ext.interlace = Set8Bits(tmp);
 		newmode.ext.horiz |= SetBitField(tmp, 8:8,4:4);
-	} else 
+	} else
 		newmode.ext.interlace = 0xff; /* interlace off */
 
 	if (par->riva.Architecture >= NV_ARCH_10)
@@ -774,7 +775,7 @@ static int riva_load_video_mode(struct fb_info *info)
 	if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
 		newmode.misc_output &= ~0x80;
 	else
-		newmode.misc_output |= 0x80;	
+		newmode.misc_output |= 0x80;
 
 	rc = CalcStateExt(&par->riva, &newmode.ext, par->pdev, bpp, width,
 			  hDisplaySize, height, dotClock);
@@ -841,7 +842,7 @@ static void riva_update_var(struct fb_var_screeninfo *var,
 }
 
 /**
- * rivafb_do_maximize - 
+ * rivafb_do_maximize -
  * @info: pointer to fb_info object containing info for current riva board
  * @var: standard kernel fb changeable data
  * @nom: nom
@@ -852,7 +853,7 @@ static void riva_update_var(struct fb_var_screeninfo *var,
  *
  * RETURNS:
  * -EINVAL on failure, 0 on success
- * 
+ *
  *
  * CALLED FROM:
  * rivafb_check_var()
@@ -916,14 +917,14 @@ static int rivafb_do_maximize(struct fb_info *info,
 			return -EINVAL;
 		}
 	}
-	
+
 	if (var->xres_virtual * nom / den >= 8192) {
 		printk(KERN_WARNING PFX
 		       "virtual X resolution (%d) is too high, lowering to %d\n",
 		       var->xres_virtual, 8192 * den / nom - 16);
 		var->xres_virtual = 8192 * den / nom - 16;
 	}
-	
+
 	if (var->xres_virtual < var->xres) {
 		printk(KERN_ERR PFX
 		       "virtual X resolution (%d) is smaller than real\n", var->xres_virtual);
@@ -1010,7 +1011,7 @@ static int riva_get_cmap_len(const struct fb_var_screeninfo *var)
 		break;
 	case 6:
 		rc = 64;	/* 64 entries (2^6), 16 bpp, RGB565 */
-		break;		
+		break;
 	default:
 		/* should not occur */
 		break;
@@ -1042,7 +1043,7 @@ static int rivafb_open(struct fb_info *info, int user)
 		/* vgaHWunlock() + riva unlock (0x7F) */
 		CRTCout(par, 0x11, 0xFF);
 		par->riva.LockUnlock(&par->riva, 0);
-	
+
 		riva_save_state(par, &par->initial_state);
 	}
 	par->ref_count++;
@@ -1082,7 +1083,7 @@ static int rivafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	struct riva_par *par = info->par;
 	int nom, den;		/* translating from pixels->bytes */
 	int mode_valid = 0;
-	
+
 	NVTRACE_ENTER();
 	if (!var->pixclock)
 		return -EINVAL;
@@ -1176,7 +1177,7 @@ static int rivafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	if (var->yoffset > var->yres_virtual - var->yres)
 		var->yoffset = var->yres_virtual - var->yres - 1;
 
-	var->red.msb_right = 
+	var->red.msb_right =
 	    var->green.msb_right =
 	    var->blue.msb_right =
 	    var->transp.offset = var->transp.length = var->transp.msb_right = 0;
@@ -1198,7 +1199,7 @@ static int rivafb_set_par(struct fb_info *info)
 		goto out;
 	if(!(info->flags & FBINFO_HWACCEL_DISABLED))
 		riva_setup_accel(info);
-	
+
 	par->cursor_reset = 1;
 	info->fix.line_length = (info->var.xres_virtual * (info->var.bits_per_pixel >> 3));
 	info->fix.visual = (info->var.bits_per_pixel == 8) ?
@@ -1486,7 +1487,7 @@ static inline void convert_bgcolor_16(u32 *col)
  * CALLED FROM:
  * framebuffer hook
  */
-static void rivafb_imageblit(struct fb_info *info, 
+static void rivafb_imageblit(struct fb_info *info,
 			     const struct fb_image *image)
 {
 	struct riva_par *par = info->par;
@@ -1515,7 +1516,7 @@ static void rivafb_imageblit(struct fb_info *info,
 			bgx = par->palette[image->bg_color];
 		}
 		if (info->var.green.length == 6)
-			convert_bgcolor_16(&bgx);	
+			convert_bgcolor_16(&bgx);
 		break;
 	}
 
@@ -1612,7 +1613,7 @@ static int rivafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 		u8 *dat = (u8 *) cursor->image.data;
 		u8 *msk = (u8 *) cursor->mask;
 		u8 *src;
-		
+
 		src = kmalloc_array(s_pitch, cursor->image.height, GFP_ATOMIC);
 
 		if (src) {
@@ -1683,7 +1684,7 @@ static const struct fb_ops riva_fb_ops = {
 	.fb_fillrect 	= rivafb_fillrect,
 	.fb_copyarea 	= rivafb_copyarea,
 	.fb_imageblit 	= rivafb_imageblit,
-	.fb_cursor	= rivafb_cursor,	
+	.fb_cursor	= rivafb_cursor,
 	.fb_sync 	= rivafb_sync,
 };
 
@@ -1713,7 +1714,7 @@ static int riva_set_fbinfo(struct fb_info *info)
 	info->pseudo_palette = par->pseudo_palette;
 
 	cmap_len = riva_get_cmap_len(&info->var);
-	fb_alloc_cmap(&info->cmap, cmap_len, 0);	
+	fb_alloc_cmap(&info->cmap, cmap_len, 0);
 
 	info->pixmap.size = 8 * 1024;
 	info->pixmap.buf_align = 4;
@@ -1898,6 +1899,10 @@ static int rivafb_probe(struct pci_dev *pd, const struct pci_device_id *ent)
 	NVTRACE_ENTER();
 	assert(pd != NULL);
 
+	ret = aperture_remove_conflicting_pci_devices(pd, "rivafb");
+	if (ret)
+		return ret;
+
 	info = framebuffer_alloc(sizeof(struct riva_par), &pd->dev);
 	if (!info) {
 		ret = -ENOMEM;
@@ -1929,7 +1934,7 @@ static int rivafb_probe(struct pci_dev *pd, const struct pci_device_id *ent)
 
 	default_par->Chipset = (pd->vendor << 16) | pd->device;
 	printk(KERN_INFO PFX "nVidia device/chipset %X\n",default_par->Chipset);
-	
+
 	if(default_par->riva.Architecture == 0) {
 		printk(KERN_ERR PFX "unknown NV_ARCH\n");
 		ret=-ENODEV;
@@ -1947,7 +1952,7 @@ static int rivafb_probe(struct pci_dev *pd, const struct pci_device_id *ent)
 	if (flatpanel == 1)
 		printk(KERN_INFO PFX "flatpanel support enabled\n");
 	default_par->forceCRTC = forceCRTC;
-	
+
 	rivafb_fix.mmio_len = pci_resource_len(pd, 0);
 	rivafb_fix.smem_len = pci_resource_len(pd, 1);
 
@@ -1959,7 +1964,7 @@ static int rivafb_probe(struct pci_dev *pd, const struct pci_device_id *ent)
 		cmd |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
 		pci_write_config_word(pd, PCI_COMMAND, cmd);
 	}
-	
+
 	rivafb_fix.mmio_start = pci_resource_start(pd, 0);
 	rivafb_fix.smem_start = pci_resource_start(pd, 1);
 
@@ -2058,7 +2063,7 @@ err_iounmap_screen_base:
 #endif
 	iounmap(info->screen_base);
 err_iounmap_pramin:
-	if (default_par->riva.Architecture == NV_ARCH_03) 
+	if (default_par->riva.Architecture == NV_ARCH_03)
 		iounmap(default_par->riva.PRAMIN);
 err_iounmap_ctrl_base:
 	iounmap(default_par->ctrl_base);
@@ -2077,7 +2082,7 @@ static void rivafb_remove(struct pci_dev *pd)
 {
 	struct fb_info *info = pci_get_drvdata(pd);
 	struct riva_par *par = info->par;
-	
+
 	NVTRACE_ENTER();
 
 #ifdef CONFIG_FB_RIVA_I2C
@@ -2117,11 +2122,11 @@ static int rivafb_setup(char *options)
 	while ((this_opt = strsep(&options, ",")) != NULL) {
 		if (!strncmp(this_opt, "forceCRTC", 9)) {
 			char *p;
-			
+
 			p = this_opt + 9;
-			if (!*p || !*(++p)) continue; 
+			if (!*p || !*(++p)) continue;
 			forceCRTC = *p - '0';
-			if (forceCRTC < 0 || forceCRTC > 1) 
+			if (forceCRTC < 0 || forceCRTC > 1)
 				forceCRTC = -1;
 		} else if (!strncmp(this_opt, "flatpanel", 9)) {
 			flatpanel = 1;
diff --git a/drivers/video/fbdev/s3fb.c b/drivers/video/fbdev/s3fb.c
index 67b63a753cb2..7713274bd04c 100644
--- a/drivers/video/fbdev/s3fb.c
+++ b/drivers/video/fbdev/s3fb.c
@@ -11,6 +11,7 @@
  * which is based on the code of neofb.
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -1131,6 +1132,10 @@ static int s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
+	rc = aperture_remove_conflicting_pci_devices(dev, "s3fb");
+	if (rc)
+		return rc;
+
 	/* Allocate and fill driver data structure */
 	info = framebuffer_alloc(sizeof(struct s3fb_info), &(dev->dev));
 	if (!info)
diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c
index 8114c921ceb8..b7818b652698 100644
--- a/drivers/video/fbdev/savage/savagefb_driver.c
+++ b/drivers/video/fbdev/savage/savagefb_driver.c
@@ -41,6 +41,7 @@
  *
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -2176,6 +2177,10 @@ static int savagefb_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	DBG("savagefb_probe");
 
+	err = aperture_remove_conflicting_pci_devices(dev, "savagefb");
+	if (err)
+		return err;
+
 	info = framebuffer_alloc(sizeof(struct savagefb_par), &dev->dev);
 	if (!info)
 		return -ENOMEM;
diff --git a/drivers/video/fbdev/sis/sis_main.c b/drivers/video/fbdev/sis/sis_main.c
index c9e77429dfa3..1c197c3f9538 100644
--- a/drivers/video/fbdev/sis/sis_main.c
+++ b/drivers/video/fbdev/sis/sis_main.c
@@ -19,6 +19,7 @@
  * which is (c) 1998 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -5861,6 +5862,10 @@ static int sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if(sisfb_off)
 		return -ENXIO;
 
+	ret = aperture_remove_conflicting_pci_devices(pdev, "sisfb");
+	if (ret)
+		return ret;
+
 	sis_fb_info = framebuffer_alloc(sizeof(*ivideo), &pdev->dev);
 	if(!sis_fb_info)
 		return -ENOMEM;
diff --git a/drivers/video/fbdev/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c
index 8ab9a3fbd281..a10f1057293b 100644
--- a/drivers/video/fbdev/skeletonfb.c
+++ b/drivers/video/fbdev/skeletonfb.c
@@ -10,38 +10,39 @@
  *  The primary goal is to remove the console code from fbdev and place it
  *  into fbcon.c. This reduces the code and makes writing a new fbdev driver
  *  easy since the author doesn't need to worry about console internals. It
- *  also allows the ability to run fbdev without a console/tty system on top 
- *  of it. 
+ *  also allows the ability to run fbdev without a console/tty system on top
+ *  of it.
  *
  *  First the roles of struct fb_info and struct display have changed. Struct
  *  display will go away. The way the new framebuffer console code will
- *  work is that it will act to translate data about the tty/console in 
+ *  work is that it will act to translate data about the tty/console in
  *  struct vc_data to data in a device independent way in struct fb_info. Then
- *  various functions in struct fb_ops will be called to store the device 
- *  dependent state in the par field in struct fb_info and to change the 
+ *  various functions in struct fb_ops will be called to store the device
+ *  dependent state in the par field in struct fb_info and to change the
  *  hardware to that state. This allows a very clean separation of the fbdev
  *  layer from the console layer. It also allows one to use fbdev on its own
- *  which is a bounus for embedded devices. The reason this approach works is  
+ *  which is a bounus for embedded devices. The reason this approach works is
  *  for each framebuffer device when used as a tty/console device is allocated
- *  a set of virtual terminals to it. Only one virtual terminal can be active 
- *  per framebuffer device. We already have all the data we need in struct 
+ *  a set of virtual terminals to it. Only one virtual terminal can be active
+ *  per framebuffer device. We already have all the data we need in struct
  *  vc_data so why store a bunch of colormaps and other fbdev specific data
- *  per virtual terminal. 
+ *  per virtual terminal.
  *
  *  As you can see doing this makes the con parameter pretty much useless
- *  for struct fb_ops functions, as it should be. Also having struct  
- *  fb_var_screeninfo and other data in fb_info pretty much eliminates the 
+ *  for struct fb_ops functions, as it should be. Also having struct
+ *  fb_var_screeninfo and other data in fb_info pretty much eliminates the
  *  need for get_fix and get_var. Once all drivers use the fix, var, and cmap
  *  fbcon can be written around these fields. This will also eliminate the
  *  need to regenerate struct fb_var_screeninfo, struct fb_fix_screeninfo
  *  struct fb_cmap every time get_var, get_fix, get_cmap functions are called
- *  as many drivers do now. 
+ *  as many drivers do now.
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive for
  *  more details.
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -66,68 +67,68 @@
 static char *mode_option;
 
 /*
- *  If your driver supports multiple boards, you should make the  
- *  below data types arrays, or allocate them dynamically (using kmalloc()). 
- */ 
+ *  If your driver supports multiple boards, you should make the
+ *  below data types arrays, or allocate them dynamically (using kmalloc()).
+ */
 
-/* 
+/*
  * This structure defines the hardware state of the graphics card. Normally
  * you place this in a header file in linux/include/video. This file usually
  * also includes register information. That allows other driver subsystems
- * and userland applications the ability to use the same header file to 
- * avoid duplicate work and easy porting of software. 
+ * and userland applications the ability to use the same header file to
+ * avoid duplicate work and easy porting of software.
  */
 struct xxx_par;
 
 /*
  * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo
  * if we don't use modedb. If we do use modedb see xxxfb_init how to use it
- * to get a fb_var_screeninfo. Otherwise define a default var as well. 
+ * to get a fb_var_screeninfo. Otherwise define a default var as well.
  */
 static const struct fb_fix_screeninfo xxxfb_fix = {
-	.id =		"FB's name", 
+	.id =		"FB's name",
 	.type =		FB_TYPE_PACKED_PIXELS,
 	.visual =	FB_VISUAL_PSEUDOCOLOR,
 	.xpanstep =	1,
 	.ypanstep =	1,
-	.ywrapstep =	1, 
+	.ywrapstep =	1,
 	.accel =	FB_ACCEL_NONE,
 };
 
     /*
-     * 	Modern graphical hardware not only supports pipelines but some 
+     * 	Modern graphical hardware not only supports pipelines but some
      *  also support multiple monitors where each display can have
-     *  its own unique data. In this case each display could be  
-     *  represented by a separate framebuffer device thus a separate 
+     *  its own unique data. In this case each display could be
+     *  represented by a separate framebuffer device thus a separate
      *  struct fb_info. Now the struct xxx_par represents the graphics
-     *  hardware state thus only one exist per card. In this case the 
-     *  struct xxx_par for each graphics card would be shared between 
-     *  every struct fb_info that represents a framebuffer on that card. 
-     *  This allows when one display changes it video resolution (info->var) 
+     *  hardware state thus only one exist per card. In this case the
+     *  struct xxx_par for each graphics card would be shared between
+     *  every struct fb_info that represents a framebuffer on that card.
+     *  This allows when one display changes it video resolution (info->var)
      *  the other displays know instantly. Each display can always be
      *  aware of the entire hardware state that affects it because they share
      *  the same xxx_par struct. The other side of the coin is multiple
      *  graphics cards that pass data around until it is finally displayed
      *  on one monitor. Such examples are the voodoo 1 cards and high end
      *  NUMA graphics servers. For this case we have a bunch of pars, each
-     *  one that represents a graphics state, that belong to one struct 
+     *  one that represents a graphics state, that belong to one struct
      *  fb_info. Their you would want to have *par point to a array of device
-     *  states and have each struct fb_ops function deal with all those 
+     *  states and have each struct fb_ops function deal with all those
      *  states. I hope this covers every possible hardware design. If not
-     *  feel free to send your ideas at jsimmons@users.sf.net 
+     *  feel free to send your ideas at jsimmons@users.sf.net
      */
 
     /*
-     *  If your driver supports multiple boards or it supports multiple 
-     *  framebuffers, you should make these arrays, or allocate them 
+     *  If your driver supports multiple boards or it supports multiple
+     *  framebuffers, you should make these arrays, or allocate them
      *  dynamically using framebuffer_alloc() and free them with
      *  framebuffer_release().
-     */ 
+     */
 static struct fb_info info;
 
-    /* 
+    /*
      * Each one represents the state of the hardware. Most hardware have
-     * just one hardware state. These here represent the default state(s). 
+     * just one hardware state. These here represent the default state(s).
      */
 static struct xxx_par __initdata current_par;
 
@@ -136,12 +137,12 @@ static struct xxx_par __initdata current_par;
  *		     first accessed.
  *	@info: frame buffer structure that represents a single frame buffer
  *	@user: tell us if the userland (value=1) or the console is accessing
- *	       the framebuffer. 
+ *	       the framebuffer.
  *
  *	This function is the first function called in the framebuffer api.
- *	Usually you don't need to provide this function. The case where it 
+ *	Usually you don't need to provide this function. The case where it
  *	is used is to change from a text mode hardware state to a graphics
- * 	mode state. 
+ * 	mode state.
  *
  *	Returns negative errno on error, or zero on success.
  */
@@ -151,13 +152,13 @@ static int xxxfb_open(struct fb_info *info, int user)
 }
 
 /**
- *	xxxfb_release - Optional function. Called when the framebuffer 
- *			device is closed. 
+ *	xxxfb_release - Optional function. Called when the framebuffer
+ *			device is closed.
  *	@info: frame buffer structure that represents a single frame buffer
  *	@user: tell us if the userland (value=1) or the console is accessing
- *	       the framebuffer. 
- *	
- *	Thus function is called when we close /dev/fb or the framebuffer 
+ *	       the framebuffer.
+ *
+ *	Thus function is called when we close /dev/fb or the framebuffer
  *	console system is released. Usually you don't need this function.
  *	The case where it is usually used is to go from a graphics state
  *	to a text mode state.
@@ -170,17 +171,17 @@ static int xxxfb_release(struct fb_info *info, int user)
 }
 
 /**
- *      xxxfb_check_var - Optional function. Validates a var passed in. 
+ *      xxxfb_check_var - Optional function. Validates a var passed in.
  *      @var: frame buffer variable screen structure
- *      @info: frame buffer structure that represents a single frame buffer 
+ *      @info: frame buffer structure that represents a single frame buffer
  *
  *	Checks to see if the hardware supports the state requested by
- *	var passed in. This function does not alter the hardware state!!! 
- *	This means the data stored in struct fb_info and struct xxx_par do 
- *      not change. This includes the var inside of struct fb_info. 
+ *	var passed in. This function does not alter the hardware state!!!
+ *	This means the data stored in struct fb_info and struct xxx_par do
+ *      not change. This includes the var inside of struct fb_info.
  *	Do NOT change these. This function can be called on its own if we
- *	intent to only test a mode and not actually set it. The stuff in 
- *	modedb.c is a example of this. If the var passed in is slightly 
+ *	intent to only test a mode and not actually set it. The stuff in
+ *	modedb.c is a example of this. If the var passed in is slightly
  *	off by what the hardware can support then we alter the var PASSED in
  *	to what we can do.
  *
@@ -208,7 +209,7 @@ static int xxxfb_release(struct fb_info *info, int user)
 static int xxxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
     /* ... */
-    return 0;	   	
+    return 0;
 }
 
 /**
@@ -217,9 +218,9 @@ static int xxxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
  *
  *	Using the fb_var_screeninfo in fb_info we set the resolution of the
  *	this particular framebuffer. This function alters the par AND the
- *	fb_fix_screeninfo stored in fb_info. It doesn't not alter var in 
+ *	fb_fix_screeninfo stored in fb_info. It doesn't not alter var in
  *	fb_info since we are using that data. This means we depend on the
- *	data in var inside fb_info to be supported by the hardware. 
+ *	data in var inside fb_info to be supported by the hardware.
  *
  *      This function is also used to recover/restore the hardware to a
  *      known working state.
@@ -254,20 +255,20 @@ static int xxxfb_set_par(struct fb_info *info)
 {
     struct xxx_par *par = info->par;
     /* ... */
-    return 0;	
+    return 0;
 }
 
 /**
  *  	xxxfb_setcolreg - Optional function. Sets a color register.
- *      @regno: Which register in the CLUT we are programming 
- *      @red: The red value which can be up to 16 bits wide 
- *	@green: The green value which can be up to 16 bits wide 
+ *      @regno: Which register in the CLUT we are programming
+ *      @red: The red value which can be up to 16 bits wide
+ *	@green: The green value which can be up to 16 bits wide
  *	@blue:  The blue value which can be up to 16 bits wide.
  *	@transp: If supported, the alpha value which can be up to 16 bits wide.
  *      @info: frame buffer info structure
- * 
+ *
  *  	Set a single color register. The values supplied have a 16 bit
- *  	magnitude which needs to be scaled in this function for the hardware. 
+ *  	magnitude which needs to be scaled in this function for the hardware.
  *	Things to take into consideration are how many color registers, if
  *	any, are supported with the current color visual. With truecolor mode
  *	no color palettes are supported. Here a pseudo palette is created
@@ -275,8 +276,8 @@ static int xxxfb_set_par(struct fb_info *info)
  *	pseudocolor mode we have a limited color palette. To deal with this
  *	we can program what color is displayed for a particular pixel value.
  *	DirectColor is similar in that we can program each color field. If
- *	we have a static colormap we don't need to implement this function. 
- * 
+ *	we have a static colormap we don't need to implement this function.
+ *
  *	Returns negative errno on error, or zero on success.
  */
 static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
@@ -440,7 +441,7 @@ static int xxxfb_pan_display(struct fb_var_screeninfo *var,
 
 /**
  *      xxxfb_blank - NOT a required function. Blanks the display.
- *      @blank_mode: the blank mode we want. 
+ *      @blank_mode: the blank mode we want.
  *      @info: frame buffer structure that represents a single frame buffer
  *
  *      Blank the screen if blank_mode != FB_BLANK_UNBLANK, else unblank.
@@ -469,22 +470,22 @@ static int xxxfb_blank(int blank_mode, struct fb_info *info)
 
 /*
  * We provide our own functions if we have hardware acceleration
- * or non packed pixel format layouts. If we have no hardware 
+ * or non packed pixel format layouts. If we have no hardware
  * acceleration, we can use a generic unaccelerated function. If using
- * a pack pixel format just use the functions in cfb_*.c. Each file 
+ * a pack pixel format just use the functions in cfb_*.c. Each file
  * has one of the three different accel functions we support.
  */
 
 /**
- *      xxxfb_fillrect - REQUIRED function. Can use generic routines if 
+ *      xxxfb_fillrect - REQUIRED function. Can use generic routines if
  *		 	 non acclerated hardware and packed pixel based.
- *			 Draws a rectangle on the screen.		
+ *			 Draws a rectangle on the screen.
  *
  *      @info: frame buffer structure that represents a single frame buffer
- *	@region: The structure representing the rectangular region we 
+ *	@region: The structure representing the rectangular region we
  *		 wish to draw to.
  *
- *	This drawing operation places/removes a retangle on the screen 
+ *	This drawing operation places/removes a retangle on the screen
  *	depending on the rastering operation with the value of color which
  *	is in the current color depth format.
  */
@@ -492,13 +493,13 @@ void xxxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
 {
 /*	Meaning of struct fb_fillrect
  *
- *	@dx: The x and y corrdinates of the upper left hand corner of the 
- *	@dy: area we want to draw to. 
+ *	@dx: The x and y corrdinates of the upper left hand corner of the
+ *	@dy: area we want to draw to.
  *	@width: How wide the rectangle is we want to draw.
  *	@height: How tall the rectangle is we want to draw.
- *	@color:	The color to fill in the rectangle with. 
+ *	@color:	The color to fill in the rectangle with.
  *	@rop: The raster operation. We can draw the rectangle with a COPY
- *	      of XOR which provides erasing effect. 
+ *	      of XOR which provides erasing effect.
  */
 }
 
@@ -514,7 +515,7 @@ void xxxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
  *      This drawing operation copies a rectangular area from one area of the
  *	screen to another area.
  */
-void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area) 
+void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
 {
 /*
  *      @dx: The x and y coordinates of the upper left hand corner of the
@@ -530,28 +531,28 @@ void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
 /**
  *      xxxfb_imageblit - REQUIRED function. Can use generic routines if
  *                        non acclerated hardware and packed pixel based.
- *                        Copies a image from system memory to the screen. 
+ *                        Copies a image from system memory to the screen.
  *
  *      @info: frame buffer structure that represents a single frame buffer
  *	@image:	structure defining the image.
  *
- *      This drawing operation draws a image on the screen. It can be a 
+ *      This drawing operation draws a image on the screen. It can be a
  *	mono image (needed for font handling) or a color image (needed for
- *	tux). 
+ *	tux).
  */
-void xxxfb_imageblit(struct fb_info *p, const struct fb_image *image) 
+void xxxfb_imageblit(struct fb_info *p, const struct fb_image *image)
 {
 /*
  *      @dx: The x and y coordinates of the upper left hand corner of the
  *	@dy: destination area to place the image on the screen.
  *      @width: How wide the image is we want to copy.
  *      @height: How tall the image is we want to copy.
- *      @fg_color: For mono bitmap images this is color data for     
+ *      @fg_color: For mono bitmap images this is color data for
  *      @bg_color: the foreground and background of the image to
  *		   write directly to the frmaebuffer.
  *	@depth:	How many bits represent a single pixel for this image.
  *	@data: The actual data used to construct the image on the display.
- *	@cmap: The colormap used for color images.   
+ *	@cmap: The colormap used for color images.
  */
 
 /*
@@ -578,13 +579,13 @@ void xxxfb_imageblit(struct fb_info *p, const struct fb_image *image)
 int xxxfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
 /*
- *      @set: 	Which fields we are altering in struct fb_cursor 
- *	@enable: Disable or enable the cursor 
- *      @rop: 	The bit operation we want to do. 
- *      @mask:  This is the cursor mask bitmap. 
+ *      @set: 	Which fields we are altering in struct fb_cursor
+ *	@enable: Disable or enable the cursor
+ *      @rop: 	The bit operation we want to do.
+ *      @mask:  This is the cursor mask bitmap.
  *      @dest:  A image of the area we are going to display the cursor.
- *		Used internally by the driver.	 
- *      @hot:	The hot spot. 
+ *		Used internally by the driver.
+ *      @hot:	The hot spot.
  *	@image:	The actual data for the cursor image.
  *
  *      NOTES ON FLAGS (cursor->set):
@@ -612,11 +613,11 @@ int xxxfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 }
 
 /**
- *	xxxfb_sync - NOT a required function. Normally the accel engine 
+ *	xxxfb_sync - NOT a required function. Normally the accel engine
  *		     for a graphics card take a specific amount of time.
  *		     Often we have to wait for the accelerator to finish
  *		     its operation before we can write to the framebuffer
- *		     so we can have consistent display output. 
+ *		     so we can have consistent display output.
  *
  *      @info: frame buffer structure that represents a single frame buffer
  *
@@ -664,8 +665,15 @@ static int xxxfb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
     struct fb_info *info;
     struct xxx_par *par;
     struct device *device = &dev->dev; /* or &pdev->dev */
-    int cmap_len, retval;	
-   
+    int cmap_len, retval;
+
+    /*
+     * Remove firmware-based drivers that create resource conflicts.
+     */
+    retval = aperture_remove_conflicting_pci_devices(pdev, "xxxfb");
+    if (retval)
+	    return retval;
+
     /*
      * Dynamically allocate info and par
      */
@@ -677,11 +685,11 @@ static int xxxfb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 
     par = info->par;
 
-    /* 
+    /*
      * Here we set the screen_base to the virtual memory address
      * for the framebuffer. Usually we obtain the resource address
      * from the bus layer and then translate it to virtual memory
-     * space via ioremap. Consult ioport.h. 
+     * space via ioremap. Consult ioport.h.
      */
     info->screen_base = framebuffer_virtual_memory;
     info->fbops = &xxxfb_ops;
@@ -765,24 +773,24 @@ static int xxxfb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 
     /*
      * This should give a reasonable default video mode. The following is
-     * done when we can set a video mode. 
+     * done when we can set a video mode.
      */
     if (!mode_option)
-	mode_option = "640x480@60";	 	
+	mode_option = "640x480@60";
 
     retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
-  
+
     if (!retval || retval == 4)
-	return -EINVAL;			
+	return -EINVAL;
 
     /* This has to be done! */
     if (fb_alloc_cmap(&info->cmap, cmap_len, 0))
 	return -ENOMEM;
-	
-    /* 
-     * The following is done in the case of having hardware with a static 
-     * mode. If we are setting the mode ourselves we don't call this. 
-     */	
+
+    /*
+     * The following is done in the case of having hardware with a static
+     * mode. If we are setting the mode ourselves we don't call this.
+     */
     info->var = xxxfb_var;
 
     /*
diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c
index 092a1caa1208..3baf33635e65 100644
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -18,6 +18,7 @@
  * Framebuffer driver for Silicon Motion SM710, SM712, SM721 and SM722 chips
  */
 
+#include <linux/aperture.h>
 #include <linux/io.h>
 #include <linux/fb.h>
 #include <linux/pci.h>
@@ -1502,6 +1503,10 @@ static int smtcfb_pci_probe(struct pci_dev *pdev,
 
 	dev_info(&pdev->dev, "Silicon Motion display driver.\n");
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "smtcfb");
+	if (err)
+		return err;
+
 	err = pci_enable_device(pdev);	/* enable SMTC chip */
 	if (err)
 		return err;
diff --git a/drivers/video/fbdev/sstfb.c b/drivers/video/fbdev/sstfb.c
index cd4d640f9477..a56b24288566 100644
--- a/drivers/video/fbdev/sstfb.c
+++ b/drivers/video/fbdev/sstfb.c
@@ -80,6 +80,7 @@
  * Includes
  */
 
+#include <linux/aperture.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -364,7 +365,7 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 	var->pixclock = KHZ2PICOS(freq);
-	
+
 	if (var->vmode & FB_VMODE_INTERLACED)
 		vBackPorch += (vBackPorch % 2);
 	if (var->vmode & FB_VMODE_DOUBLE) {
@@ -382,7 +383,7 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
 		printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel);
 		return -EINVAL;
 	}
-	
+
 	/* validity tests */
 	if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1  ||
 	    hSyncOff <= 1  || var->left_margin <= 2  || vSyncOn <= 0 ||
@@ -392,7 +393,7 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
 
 	if (IS_VOODOO2(par)) {
 		/* Voodoo 2 limits */
-		tiles_in_X = (var->xres + 63 ) / 64 * 2;		
+		tiles_in_X = (var->xres + 63 ) / 64 * 2;
 
 		if (var->xres  > POW2(11) || yDim >= POW2(11)) {
 			printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
@@ -631,7 +632,7 @@ static int sstfb_set_par(struct fb_info *info)
 	lfbmode |= ( LFB_WORD_SWIZZLE_WR | LFB_BYTE_SWIZZLE_WR |
 		     LFB_WORD_SWIZZLE_RD | LFB_BYTE_SWIZZLE_RD );
 #endif
-	
+
 	if (clipping) {
 		sst_write(LFBMODE, lfbmode | EN_PXL_PIPELINE);
 	/*
@@ -684,7 +685,7 @@ static int sstfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	    | (green << info->var.green.offset)
 	    | (blue  << info->var.blue.offset)
 	    | (transp << info->var.transp.offset);
-	
+
 	par->palette[regno] = col;
 
 	return 0;
@@ -773,7 +774,7 @@ static void sstfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 {
 	struct sstfb_par *par = info->par;
 	u32 stride = info->fix.line_length;
-   
+
 	if (!IS_VOODOO2(par))
 		return;
 
@@ -795,17 +796,17 @@ static void sstfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
  * FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only
  */
 #if 0
-static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 
+static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 {
 	struct sstfb_par *par = info->par;
 	u32 stride = info->fix.line_length;
 
 	if (!IS_VOODOO2(par))
 		return;
-   	
+
 	sst_write(BLTCLIPX, info->var.xres);
 	sst_write(BLTCLIPY, info->var.yres);
-	
+
 	sst_write(BLTDSTBASEADDR, 0);
 	sst_write(BLTCOLOR, rect->color);
 	sst_write(BLTROP, rect->rop == ROP_COPY ? BLTROP_COPY : BLTROP_XOR);
@@ -820,8 +821,8 @@ static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 
 
 
-/* 
- * get lfb size 
+/*
+ * get lfb size
  */
 static int sst_get_memsize(struct fb_info *info, __u32 *memsize)
 {
@@ -859,8 +860,8 @@ static int sst_get_memsize(struct fb_info *info, __u32 *memsize)
 }
 
 
-/* 
- * DAC detection routines 
+/*
+ * DAC detection routines
  */
 
 /* fbi should be idle, and fifo emty and mem disabled */
@@ -963,7 +964,7 @@ static int sst_detect_ics(struct fb_info *info)
  * see detect_dac
  */
 
-static int sst_set_pll_att_ti(struct fb_info *info, 
+static int sst_set_pll_att_ti(struct fb_info *info,
 		const struct pll_timing *t, const int clock)
 {
 	struct sstfb_par *par = info->par;
@@ -1326,6 +1327,10 @@ static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct sst_spec *spec;
 	int err;
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "sstfb");
+	if (err)
+		return err;
+
 	/* Enable device in PCI config. */
 	if ((err=pci_enable_device(pdev))) {
 		printk(KERN_ERR "cannot enable device\n");
@@ -1338,10 +1343,10 @@ static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return -ENOMEM;
 
 	pci_set_drvdata(pdev, info);
-	
+
 	par  = info->par;
 	fix  = &info->fix;
-	
+
 	par->type = id->driver_data;
 	spec = &voodoo_spec[par->type];
 	f_ddprintk("found device : %s\n", spec->name);
@@ -1407,7 +1412,7 @@ static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * fact dithered to 16bit).
 	 */
 	fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
-	
+
 	fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16);
 
 	if (sstfb_check_var(&info->var, info)) {
@@ -1419,7 +1424,7 @@ static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		printk(KERN_ERR "sstfb: can't set default video mode.\n");
 		goto fail;
 	}
-	
+
 	if (fb_alloc_cmap(&info->cmap, 256, 0)) {
 		printk(KERN_ERR "sstfb: can't alloc cmap memory.\n");
 		goto fail;
@@ -1465,7 +1470,7 @@ static void sstfb_remove(struct pci_dev *pdev)
 
 	info = pci_get_drvdata(pdev);
 	par = info->par;
-	
+
 	device_remove_file(info->dev, &device_attrs[0]);
 	sst_shutdown(info);
 	iounmap(info->screen_base);
diff --git a/drivers/video/fbdev/sunxvr2500.c b/drivers/video/fbdev/sunxvr2500.c
index 1279b02234f8..f4059529c602 100644
--- a/drivers/video/fbdev/sunxvr2500.c
+++ b/drivers/video/fbdev/sunxvr2500.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
  */
 
+#include <linux/aperture.h>
 #include <linux/kernel.h>
 #include <linux/fb.h>
 #include <linux/pci.h>
@@ -123,6 +124,10 @@ static int s3d_pci_register(struct pci_dev *pdev,
 	struct s3d_info *sp;
 	int err;
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "s3dfb");
+	if (err)
+		return err;
+
 	err = pci_enable_device(pdev);
 	if (err < 0) {
 		printk(KERN_ERR "s3d: Cannot enable PCI device %s\n",
diff --git a/drivers/video/fbdev/sunxvr500.c b/drivers/video/fbdev/sunxvr500.c
index f7b463633ba0..b0c8cf0c535a 100644
--- a/drivers/video/fbdev/sunxvr500.c
+++ b/drivers/video/fbdev/sunxvr500.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
  */
 
+#include <linux/aperture.h>
 #include <linux/kernel.h>
 #include <linux/fb.h>
 #include <linux/pci.h>
@@ -249,6 +250,10 @@ static int e3d_pci_register(struct pci_dev *pdev,
 	unsigned int line_length;
 	int err;
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "e3dfb");
+	if (err)
+		return err;
+
 	of_node = pci_device_to_OF_node(pdev);
 	if (!of_node) {
 		printk(KERN_ERR "e3d: Cannot find OF node of %s\n",
diff --git a/drivers/video/fbdev/tdfxfb.c b/drivers/video/fbdev/tdfxfb.c
index 8a8122f8bfeb..592a913d0718 100644
--- a/drivers/video/fbdev/tdfxfb.c
+++ b/drivers/video/fbdev/tdfxfb.c
@@ -64,6 +64,7 @@
  *
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -1376,6 +1377,10 @@ static int tdfxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct fb_monspecs *specs;
 	bool found;
 
+	err = aperture_remove_conflicting_pci_devices(pdev, "tdfxfb");
+	if (err)
+		return err;
+
 	err = pci_enable_device(pdev);
 	if (err) {
 		printk(KERN_ERR "tdfxfb: Can't enable pdev: %d\n", err);
diff --git a/drivers/video/fbdev/tgafb.c b/drivers/video/fbdev/tgafb.c
index 1fff5fd7ab51..251dbd282f5e 100644
--- a/drivers/video/fbdev/tgafb.c
+++ b/drivers/video/fbdev/tgafb.c
@@ -12,6 +12,7 @@
  *  more details.
  */
 
+#include <linux/aperture.h>
 #include <linux/bitrev.h>
 #include <linux/compiler.h>
 #include <linux/delay.h>
@@ -106,6 +107,12 @@ static struct pci_driver tgafb_pci_driver = {
 static int tgafb_pci_register(struct pci_dev *pdev,
 			      const struct pci_device_id *ent)
 {
+	int ret;
+
+	ret = aperture_remove_conflicting_pci_devices(pdev, "tgafb");
+	if (ret)
+		return ret;
+
 	return tgafb_register(&pdev->dev);
 }
 
@@ -729,7 +736,7 @@ tgafb_mono_imageblit(struct fb_info *info, const struct fb_image *image)
 
 		/* Handle another common case in which accel_putcs
 		   generates a large bitmap, which happens to be aligned.
-		   Allow the tail to be misaligned.  This case is 
+		   Allow the tail to be misaligned.  This case is
 		   interesting because we've not got to hold partial
 		   bytes across the words being written.  */
 
@@ -908,9 +915,9 @@ tgafb_imageblit(struct fb_info *info, const struct fb_image *image)
 }
 
 /**
- *      tgafb_fillrect - REQUIRED function. Can use generic routines if 
+ *      tgafb_fillrect - REQUIRED function. Can use generic routines if
  *                       non acclerated hardware and packed pixel based.
- *                       Draws a rectangle on the screen.               
+ *                       Draws a rectangle on the screen.
  *
  *      @info: frame buffer structure that represents a single frame buffer
  *      @rect: structure defining the rectagle and operation.
@@ -1044,7 +1051,7 @@ tgafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 
 /* Handle the special case of copying entire lines, e.g. during scrolling.
    We can avoid a lot of needless computation in this case.  In the 8bpp
-   case we need to use the COPY64 registers instead of mask writes into 
+   case we need to use the COPY64 registers instead of mask writes into
    the frame buffer to achieve maximum performance.  */
 
 static inline void
@@ -1251,7 +1258,7 @@ copyarea_8bpp(struct fb_info *info, u32 dx, u32 dy, u32 sx, u32 sy,
 }
 
 static void
-tgafb_copyarea(struct fb_info *info, const struct fb_copyarea *area) 
+tgafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 {
 	unsigned long dx, dy, width, height, sx, sy, vxres, vyres;
 	unsigned long line_length, bpp;
diff --git a/drivers/video/fbdev/tridentfb.c b/drivers/video/fbdev/tridentfb.c
index cda095420ee8..f9c3b1d38fc2 100644
--- a/drivers/video/fbdev/tridentfb.c
+++ b/drivers/video/fbdev/tridentfb.c
@@ -16,6 +16,7 @@
  *	timing value tweaking so it looks good on every monitor in every mode
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/init.h>
@@ -1470,6 +1471,10 @@ static int trident_pci_probe(struct pci_dev *dev,
 	int chip_id;
 	bool found = false;
 
+	err = aperture_remove_conflicting_pci_devices(dev, "tridentfb");
+	if (err)
+		return err;
+
 	err = pci_enable_device(dev);
 	if (err)
 		return err;
diff --git a/drivers/video/fbdev/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c
index ff61605b8764..82b36dbb5b1a 100644
--- a/drivers/video/fbdev/vermilion/vermilion.c
+++ b/drivers/video/fbdev/vermilion/vermilion.c
@@ -14,6 +14,7 @@
  *   Alan Hourihane <alanh-at-tungstengraphics-dot-com>
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -442,7 +443,11 @@ static int vml_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	struct vml_info *vinfo;
 	struct fb_info *info;
 	struct vml_par *par;
-	int err = 0;
+	int err;
+
+	err = aperture_remove_conflicting_pci_devices(dev, "vmlfb");
+	if (err)
+		return err;
 
 	par = kzalloc(sizeof(*par), GFP_KERNEL);
 	if (par == NULL)
diff --git a/drivers/video/fbdev/vga16fb.c b/drivers/video/fbdev/vga16fb.c
index d21f68f3ee44..35cf51ae3292 100644
--- a/drivers/video/fbdev/vga16fb.c
+++ b/drivers/video/fbdev/vga16fb.c
@@ -1,13 +1,13 @@
 /*
  * linux/drivers/video/vga16.c -- VGA 16-color framebuffer driver
- * 
+ *
  * Copyright 1999 Ben Pfaff <pfaffben@debian.org> and Petr Vandrovec <VANDROVE@vc.cvut.cz>
  * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm
  * Based on VESA framebuffer (c) 1998 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  *
  * This file is subject to the terms and conditions of the GNU General
  * Public License.  See the file COPYING in the main directory of this
- * archive for more details.  
+ * archive for more details.
  */
 
 #include <linux/module.h>
@@ -25,9 +25,6 @@
 #include <asm/io.h>
 #include <video/vga.h>
 
-#define VGA_FB_PHYS 0xA0000
-#define VGA_FB_PHYS_LEN 65536
-
 #define MODE_SKIP4	1
 #define MODE_8BPP	2
 #define MODE_CFB	4
@@ -70,7 +67,7 @@ static struct fb_var_screeninfo vga16fb_defined = {
 	.yres		= 480,
 	.xres_virtual	= 640,
 	.yres_virtual	= 480,
-	.bits_per_pixel	= 4,	
+	.bits_per_pixel	= 4,
 	.activate	= FB_ACTIVATE_TEST,
 	.height		= -1,
 	.width		= -1,
@@ -87,8 +84,8 @@ static struct fb_var_screeninfo vga16fb_defined = {
 /* name should not depend on EGA/VGA */
 static const struct fb_fix_screeninfo vga16fb_fix = {
 	.id		= "VGA16 VGA",
-	.smem_start	= VGA_FB_PHYS,
-	.smem_len	= VGA_FB_PHYS_LEN,
+	.smem_start	= VGA_FB_PHYS_BASE,
+	.smem_len	= VGA_FB_PHYS_SIZE,
 	.type		= FB_TYPE_VGA_PLANES,
 	.type_aux	= FB_AUX_VGA_PLANES_VGA4,
 	.visual		= FB_VISUAL_PSEUDOCOLOR,
@@ -120,7 +117,7 @@ static inline void rmw(volatile char __iomem *p)
 static inline int setmode(int mode)
 {
 	int oldmode;
-	
+
 	oldmode = vga_io_rgfx(VGA_GFX_MODE);
 	vga_io_w(VGA_GFX_D, mode);
 	return oldmode;
@@ -139,19 +136,19 @@ static inline void setmask(int mask)
 	vga_io_w(VGA_GFX_D, mask);
 }
 
-/* Set the Data Rotate Register and return its old value. 
+/* Set the Data Rotate Register and return its old value.
    Bits 0-2 are rotate count, bits 3-4 are logical operation
    (0=NOP, 1=AND, 2=OR, 3=XOR). */
 static inline int setop(int op)
 {
 	int oldop;
-	
+
 	oldop = vga_io_rgfx(VGA_GFX_DATA_ROTATE);
 	vga_io_w(VGA_GFX_D, op);
 	return oldop;
 }
 
-/* Set the Enable Set/Reset Register and return its old value.  
+/* Set the Enable Set/Reset Register and return its old value.
    The code here always uses value 0xf for this register. */
 static inline int setsr(int sr)
 {
@@ -185,25 +182,25 @@ static inline void setindex(int index)
 }
 
 /* Check if the video mode is supported by the driver */
-static inline int check_mode_supported(void)
+static inline int check_mode_supported(const struct screen_info *si)
 {
 	/* non-x86 architectures treat orig_video_isVGA as a boolean flag */
 #if defined(CONFIG_X86)
 	/* only EGA and VGA in 16 color graphic mode are supported */
-	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EGAC &&
-	    screen_info.orig_video_isVGA != VIDEO_TYPE_VGAC)
+	if (si->orig_video_isVGA != VIDEO_TYPE_EGAC &&
+	    si->orig_video_isVGA != VIDEO_TYPE_VGAC)
 		return -ENODEV;
 
-	if (screen_info.orig_video_mode != 0x0D &&	/* 320x200/4 (EGA) */
-	    screen_info.orig_video_mode != 0x0E &&	/* 640x200/4 (EGA) */
-	    screen_info.orig_video_mode != 0x10 &&	/* 640x350/4 (EGA) */
-	    screen_info.orig_video_mode != 0x12)	/* 640x480/4 (VGA) */
+	if (si->orig_video_mode != 0x0D &&	/* 320x200/4 (EGA) */
+	    si->orig_video_mode != 0x0E &&	/* 640x200/4 (EGA) */
+	    si->orig_video_mode != 0x10 &&	/* 640x350/4 (EGA) */
+	    si->orig_video_mode != 0x12)	/* 640x480/4 (VGA) */
 		return -ENODEV;
 #endif
 	return 0;
 }
 
-static void vga16fb_pan_var(struct fb_info *info, 
+static void vga16fb_pan_var(struct fb_info *info,
 			    struct fb_var_screeninfo *var)
 {
 	struct vga16fb_par *par = info->par;
@@ -296,7 +293,7 @@ static void vga16fb_clock_chip(struct vga16fb_par *par,
 	par->clkdiv = best->seq_clock_mode;
 	*pixclock = (best->pixclock * div) / mul;
 }
-			       
+
 #define FAIL(X) return -EINVAL
 
 static int vga16fb_open(struct fb_info *info, int user)
@@ -511,7 +508,7 @@ static int vga16fb_check_var(struct fb_var_screeninfo *var,
 		par->misc &= ~0x40;
 	if (var->sync & FB_SYNC_VERT_HIGH_ACT)
 		par->misc &= ~0x80;
-	
+
 	par->mode = mode;
 
 	if (mode & MODE_8BPP)
@@ -520,8 +517,8 @@ static int vga16fb_check_var(struct fb_var_screeninfo *var,
 	else
 		/* pixel clock == vga clock */
 		vga16fb_clock_chip(par, &var->pixclock, info, 1, 1);
-	
-	var->red.offset = var->green.offset = var->blue.offset = 
+
+	var->red.offset = var->green.offset = var->blue.offset =
 	var->transp.offset = 0;
 	var->red.length = var->green.length = var->blue.length =
 		(par->isVGA) ? 6 : 2;
@@ -588,10 +585,10 @@ static int vga16fb_set_par(struct fb_info *info)
 	else
 		atc[VGA_ATC_PEL] = info->var.xoffset & 7;
 	atc[VGA_ATC_COLOR_PAGE] = 0x00;
-	
+
 	if (par->mode & MODE_TEXT) {
-		fh = 16; // FIXME !!! Fudge font height. 
-		par->crtc[VGA_CRTC_MAX_SCAN] = (par->crtc[VGA_CRTC_MAX_SCAN] 
+		fh = 16; // FIXME !!! Fudge font height.
+		par->crtc[VGA_CRTC_MAX_SCAN] = (par->crtc[VGA_CRTC_MAX_SCAN]
 					       & ~0x1F) | (fh - 1);
 	}
 
@@ -602,10 +599,10 @@ static int vga16fb_set_par(struct fb_info *info)
 		vga_io_w(EGA_GFX_E0, 0x00);
 		vga_io_w(EGA_GFX_E1, 0x01);
 	}
-	
+
 	/* update misc output register */
 	vga_io_w(VGA_MIS_W, par->misc);
-	
+
 	/* synchronous reset on */
 	vga_io_wseq(0x00, 0x01);
 
@@ -617,7 +614,7 @@ static int vga16fb_set_par(struct fb_info *info)
 	for (i = 2; i < VGA_SEQ_C; i++) {
 		vga_io_wseq(i, seq[i]);
 	}
-	
+
 	/* synchronous reset off */
 	vga_io_wseq(0x00, 0x03);
 
@@ -628,12 +625,12 @@ static int vga16fb_set_par(struct fb_info *info)
 	for (i = 0; i < VGA_CRTC_REGS; i++) {
 		vga_io_wcrt(i, par->crtc[i]);
 	}
-	
+
 	/* write graphics controller registers */
 	for (i = 0; i < VGA_GFX_C; i++) {
 		vga_io_wgfx(i, gdc[i]);
 	}
-	
+
 	/* write attribute controller registers */
 	for (i = 0; i < VGA_ATT_C; i++) {
 		vga_io_r(VGA_IS1_RC);		/* reset flip-flop */
@@ -656,7 +653,7 @@ static void ega16_setpalette(int regno, unsigned red, unsigned green, unsigned b
 {
 	static const unsigned char map[] = { 000, 001, 010, 011 };
 	int val;
-	
+
 	if (regno >= 16)
 		return;
 	val = map[red>>14] | ((map[green>>14]) << 1) | ((map[blue>>14]) << 2);
@@ -687,17 +684,17 @@ static int vga16fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	 *  (according to the entries in the `var' structure). Return
 	 *  != 0 for invalid regno.
 	 */
-	
+
 	if (regno >= 256)
 		return 1;
 
 	gray = info->var.grayscale;
-	
+
 	if (gray) {
 		/* gray = 0.30*R + 0.59*G + 0.11*B */
 		red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
 	}
-	if (par->isVGA) 
+	if (par->isVGA)
 		vga16_setpalette(regno,red,green,blue);
 	else
 		ega16_setpalette(regno,red,green,blue);
@@ -705,7 +702,7 @@ static int vga16fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 }
 
 static int vga16fb_pan_display(struct fb_var_screeninfo *var,
-			       struct fb_info *info) 
+			       struct fb_info *info)
 {
 	vga16fb_pan_var(info, var);
 	return 0;
@@ -720,7 +717,7 @@ static void vga_vesa_blank(struct vga16fb_par *par, int mode)
 {
 	unsigned char SeqCtrlIndex = vga_io_r(VGA_SEQ_I);
 	unsigned char CrtCtrlIndex = vga_io_r(VGA_CRT_IC);
-	
+
 	/* save original values of VGA controller registers */
 	if(!par->vesa_blanked) {
 		par->vga_state.CrtMiscIO = vga_io_r(VGA_MIS_R);
@@ -776,7 +773,7 @@ static void vga_vesa_unblank(struct vga16fb_par *par)
 {
 	unsigned char SeqCtrlIndex = vga_io_r(VGA_SEQ_I);
 	unsigned char CrtCtrlIndex = vga_io_r(VGA_CRT_IC);
-	
+
 	/* restore original values of VGA controller registers */
 	vga_io_w(VGA_MIS_W, par->vga_state.CrtMiscIO);
 
@@ -962,7 +959,7 @@ static void vga16fb_fillrect(struct fb_info *info, const struct fb_fillrect *rec
 				}
 				break;
 			}
-		} else 
+		} else
 			vga_8planes_fillrect(info, rect);
 		break;
 	case FB_TYPE_PACKED_PIXELS:
@@ -1029,7 +1026,7 @@ static void vga_8planes_copyarea(struct fb_info *info, const struct fb_copyarea
 
 static void vga16fb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 {
-	u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy; 
+	u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy;
 	int x, x2, y2, old_dx, old_dy, vxres, vyres;
 	int height, width, line_ofs;
 	char __iomem *dst = NULL;
@@ -1094,9 +1091,9 @@ static void vga16fb_copyarea(struct fb_info *info, const struct fb_copyarea *are
 					dst += line_ofs;
 				}
 			} else {
-				dst = info->screen_base + (dx/8) + width + 
+				dst = info->screen_base + (dx/8) + width +
 					(dy + height - 1) * info->fix.line_length;
-				src = info->screen_base + (sx/8) + width + 
+				src = info->screen_base + (sx/8) + width +
 					(sy + height  - 1) * info->fix.line_length;
 				while (height--) {
 					for (x = 0; x < width; x++) {
@@ -1109,7 +1106,7 @@ static void vga16fb_copyarea(struct fb_info *info, const struct fb_copyarea *are
 					dst -= line_ofs;
 				}
 			}
-		} else 
+		} else
 			vga_8planes_copyarea(info, area);
 		break;
 	case FB_TYPE_PACKED_PIXELS:
@@ -1182,7 +1179,7 @@ static void vga_imageblit_expand(struct fb_info *info, const struct fb_image *im
 				setsr(0xf);
 				setcolor(image->fg_color);
 				selectmask();
-				
+
 				setmask(0xff);
 				writeb(image->bg_color, where);
 				rmb();
@@ -1191,7 +1188,7 @@ static void vga_imageblit_expand(struct fb_info *info, const struct fb_image *im
 				wmb();
 				for (y = 0; y < image->height; y++) {
 					dst = where;
-					for (x = image->width/8; x--;) 
+					for (x = image->width/8; x--;)
 						writeb(*cdat++, dst++);
 					where += info->fix.line_length;
 				}
@@ -1202,7 +1199,7 @@ static void vga_imageblit_expand(struct fb_info *info, const struct fb_image *im
 				setsr(0xf);
 				setcolor(image->bg_color);
 				selectmask();
-				
+
 				setmask(0xff);
 				for (y = 0; y < image->height; y++) {
 					dst = where;
@@ -1218,7 +1215,7 @@ static void vga_imageblit_expand(struct fb_info *info, const struct fb_image *im
 					where += info->fix.line_length;
 				}
 			}
-		} else 
+		} else
 			vga_8planes_imageblit(info, image);
 		break;
 	case FB_TYPE_PACKED_PIXELS:
@@ -1231,7 +1228,7 @@ static void vga_imageblit_expand(struct fb_info *info, const struct fb_image *im
 static void vga_imageblit_color(struct fb_info *info, const struct fb_image *image)
 {
 	/*
-	 * Draw logo 
+	 * Draw logo
 	 */
 	struct vga16fb_par *par = info->par;
 	char __iomem *where =
@@ -1248,7 +1245,7 @@ static void vga_imageblit_color(struct fb_info *info, const struct fb_image *ima
 			setsr(0xf);
 			setop(0);
 			setmode(0);
-			
+
 			for (y = 0; y < image->height; y++) {
 				for (x = 0; x < image->width; x++) {
 					dst = where + x/8;
@@ -1272,7 +1269,7 @@ static void vga_imageblit_color(struct fb_info *info, const struct fb_image *ima
 		break;
 	}
 }
-				
+
 static void vga16fb_imageblit(struct fb_info *info, const struct fb_image *image)
 {
 	if (image->depth == 1)
@@ -1304,28 +1301,22 @@ static const struct fb_ops vga16fb_ops = {
 	.fb_imageblit	= vga16fb_imageblit,
 };
 
-#ifndef MODULE
-static int __init vga16fb_setup(char *options)
-{
-	char *this_opt;
-	
-	if (!options || !*options)
-		return 0;
-	
-	while ((this_opt = strsep(&options, ",")) != NULL) {
-		if (!*this_opt) continue;
-	}
-	return 0;
-}
-#endif
-
 static int vga16fb_probe(struct platform_device *dev)
 {
+	struct screen_info *si;
 	struct fb_info *info;
 	struct vga16fb_par *par;
 	int i;
 	int ret = 0;
 
+	si = dev_get_platdata(&dev->dev);
+	if (!si)
+		return -ENODEV;
+
+	ret = check_mode_supported(si);
+	if (ret)
+		return ret;
+
 	printk(KERN_DEBUG "vga16fb: initializing\n");
 	info = framebuffer_alloc(sizeof(struct vga16fb_par), &dev->dev);
 
@@ -1339,8 +1330,8 @@ static int vga16fb_probe(struct platform_device *dev)
 		goto err_ioremap;
 	}
 
-	/* XXX share VGA_FB_PHYS and I/O region with vgacon and others */
-	info->screen_base = (void __iomem *)VGA_MAP_MEM(VGA_FB_PHYS, 0);
+	/* XXX share VGA_FB_PHYS_BASE and I/O region with vgacon and others */
+	info->screen_base = (void __iomem *)VGA_MAP_MEM(VGA_FB_PHYS_BASE, 0);
 
 	if (!info->screen_base) {
 		printk(KERN_ERR "vga16fb: unable to map device\n");
@@ -1352,19 +1343,19 @@ static int vga16fb_probe(struct platform_device *dev)
 	par = info->par;
 
 #if defined(CONFIG_X86)
-	par->isVGA = screen_info.orig_video_isVGA == VIDEO_TYPE_VGAC;
+	par->isVGA = si->orig_video_isVGA == VIDEO_TYPE_VGAC;
 #else
 	/* non-x86 architectures treat orig_video_isVGA as a boolean flag */
-	par->isVGA = screen_info.orig_video_isVGA;
+	par->isVGA = si->orig_video_isVGA;
 #endif
 	par->palette_blanked = 0;
 	par->vesa_blanked = 0;
 
 	i = par->isVGA? 6 : 2;
-	
+
 	vga16fb_defined.red.length   = i;
 	vga16fb_defined.green.length = i;
-	vga16fb_defined.blue.length  = i;	
+	vga16fb_defined.blue.length  = i;
 
 	/* name should not depend on EGA/VGA */
 	info->fbops = &vga16fb_ops;
@@ -1391,8 +1382,8 @@ static int vga16fb_probe(struct platform_device *dev)
 
 	vga16fb_update_fix(info);
 
-	info->apertures->ranges[0].base = VGA_FB_PHYS;
-	info->apertures->ranges[0].size = VGA_FB_PHYS_LEN;
+	info->apertures->ranges[0].base = VGA_FB_PHYS_BASE;
+	info->apertures->ranges[0].size = VGA_FB_PHYS_SIZE;
 
 	if (register_framebuffer(info) < 0) {
 		printk(KERN_ERR "vga16fb: unable to register framebuffer\n");
@@ -1425,58 +1416,22 @@ static int vga16fb_remove(struct platform_device *dev)
 	return 0;
 }
 
+static const struct platform_device_id vga16fb_driver_id_table[] = {
+	{"ega-framebuffer", 0},
+	{"vga-framebuffer", 0},
+	{ }
+};
+
 static struct platform_driver vga16fb_driver = {
 	.probe = vga16fb_probe,
 	.remove = vga16fb_remove,
 	.driver = {
 		.name = "vga16fb",
 	},
+	.id_table = vga16fb_driver_id_table,
 };
 
-static struct platform_device *vga16fb_device;
-
-static int __init vga16fb_init(void)
-{
-	int ret;
-#ifndef MODULE
-	char *option = NULL;
-
-	if (fb_get_options("vga16fb", &option))
-		return -ENODEV;
-
-	vga16fb_setup(option);
-#endif
-
-	ret = check_mode_supported();
-	if (ret)
-		return ret;
-
-	ret = platform_driver_register(&vga16fb_driver);
-
-	if (!ret) {
-		vga16fb_device = platform_device_alloc("vga16fb", 0);
-
-		if (vga16fb_device)
-			ret = platform_device_add(vga16fb_device);
-		else
-			ret = -ENOMEM;
-
-		if (ret) {
-			platform_device_put(vga16fb_device);
-			platform_driver_unregister(&vga16fb_driver);
-		}
-	}
-
-	return ret;
-}
-
-static void __exit vga16fb_exit(void)
-{
-	platform_device_unregister(vga16fb_device);
-	platform_driver_unregister(&vga16fb_driver);
-}
+module_platform_driver(vga16fb_driver);
 
 MODULE_DESCRIPTION("Legacy VGA framebuffer device driver");
 MODULE_LICENSE("GPL");
-module_init(vga16fb_init);
-module_exit(vga16fb_exit);
diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 89d75079b730..2ee8fcae08df 100644
--- a/drivers/video/fbdev/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
@@ -8,6 +8,7 @@
 /*
  * Core code for the Via multifunction framebuffer device.
  */
+#include <linux/aperture.h>
 #include <linux/via-core.h>
 #include <linux/via_i2c.h>
 #include <linux/via-gpio.h>
@@ -617,6 +618,10 @@ static int via_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	int ret;
 
+	ret = aperture_remove_conflicting_pci_devices(pdev, "viafb");
+	if (ret)
+		return ret;
+
 	ret = pci_enable_device(pdev);
 	if (ret)
 		return ret;
diff --git a/drivers/video/fbdev/vt8623fb.c b/drivers/video/fbdev/vt8623fb.c
index 4274c6efb249..49b9f148d3a1 100644
--- a/drivers/video/fbdev/vt8623fb.c
+++ b/drivers/video/fbdev/vt8623fb.c
@@ -12,6 +12,7 @@
  * (http://davesdomain.org.uk/viafb/)
  */
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -672,6 +673,10 @@ static int vt8623_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
+	rc = aperture_remove_conflicting_pci_devices(dev, "vt8623fb");
+	if (rc)
+		return rc;
+
 	/* Allocate and fill driver data structure */
 	info = framebuffer_alloc(sizeof(struct vt8623fb_info), &(dev->dev));
 	if (!info)
author	Linus Torvalds <torvalds@linux-foundation.org>	2022-10-05 11:24:12 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2022-10-05 11:24:12 -0700
commit	7e6739b9336e61fe23ca4e2c8d1fda8f19f979bf (patch)
tree	da3dc30b7ba682edbb7392028e20dcce194b958b /drivers/video/fbdev
parent	a47e60729d9624e931f988709ab76e043e2ee8b9 (diff)
parent	65898687cf7392c372ea8d04a88617e2cb794465 (diff)