Merge 3.8-rc5 into usb-next

This fixes up a conflict with drivers/usb/serial/io_ti.c that came up in
linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

13 files changed, 138 insertions, 126 deletions

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 77a0013c9dd3..a04342f6cbfa 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1605,6 +1605,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
 
 		if (epnum == 0 || epnum == 1) {
 			dep->endpoint.maxpacket = 512;
+			dep->endpoint.maxburst = 1;
 			dep->endpoint.ops = &dwc3_gadget_ep0_ops;
 			if (!epnum)
 				dwc->gadget.ep0 = &dep->endpoint;
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 449186c9fd6c..38388d7844fc 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1152,15 +1152,15 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
 					pr_err("%s: unmapped value: %lu\n", opts, value);
 					return -EINVAL;
 				}
-			}
-			else if (!memcmp(opts, "gid", 3))
+			} else if (!memcmp(opts, "gid", 3)) {
 				data->perms.gid = make_kgid(current_user_ns(), value);
 				if (!gid_valid(data->perms.gid)) {
 					pr_err("%s: unmapped value: %lu\n", opts, value);
 					return -EINVAL;
 				}
-			else
+			} else {
 				goto invalid;
+			}
 			break;
 
 		default:
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 1b0f086426bd..d3bd7b095ba3 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -18,14 +18,13 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_per_clk;
 static struct clk *mxc_ipg_clk;
 
 /* workaround ENGcm09152 for i.MX35 */
-#define USBPHYCTRL_OTGBASE_OFFSET	0x608
+#define MX35_USBPHYCTRL_OFFSET		0x600
+#define USBPHYCTRL_OTGBASE_OFFSET	0x8
 #define USBPHYCTRL_EVDO			(1 << 23)
 
 int fsl_udc_clk_init(struct platform_device *pdev)
@@ -59,7 +58,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 	clk_prepare_enable(mxc_per_clk);
 
 	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	if (!cpu_is_mx51()) {
+	if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {
 		freq = clk_get_rate(mxc_per_clk);
 		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 		    (freq < 59999000 || freq > 60001000)) {
@@ -79,27 +78,40 @@ eclkrate:
 	return ret;
 }
 
-void fsl_udc_clk_finalize(struct platform_device *pdev)
+int fsl_udc_clk_finalize(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-	if (cpu_is_mx35()) {
-		unsigned int v;
+	int ret = 0;
 
-		/* workaround ENGcm09152 for i.MX35 */
-		if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
-			v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-					USBPHYCTRL_OTGBASE_OFFSET));
-			writel(v | USBPHYCTRL_EVDO,
-				MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-					USBPHYCTRL_OTGBASE_OFFSET));
+	/* workaround ENGcm09152 for i.MX35 */
+	if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
+		unsigned int v;
+		struct resource *res = platform_get_resource
+			(pdev, IORESOURCE_MEM, 0);
+		void __iomem *phy_regs = ioremap(res->start +
+						MX35_USBPHYCTRL_OFFSET, 512);
+		if (!phy_regs) {
+			dev_err(&pdev->dev, "ioremap for phy address fails\n");
+			ret = -EINVAL;
+			goto ioremap_err;
 		}
+
+		v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
+		writel(v | USBPHYCTRL_EVDO,
+			phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
+
+		iounmap(phy_regs);
 	}
 
+
+ioremap_err:
 	/* ULPI transceivers don't need usbpll */
 	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
 		clk_disable_unprepare(mxc_per_clk);
 		mxc_per_clk = NULL;
 	}
+
+	return ret;
 }
 
 void fsl_udc_clk_release(void)
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 38939561cff3..04d5fef1440c 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -41,6 +41,7 @@
 #include <linux/fsl_devices.h>
 #include <linux/dmapool.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -2402,11 +2403,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	unsigned int i;
 	u32 dccparams;
 
-	if (strcmp(pdev->name, driver_name)) {
-		VDBG("Wrong device");
-		return -ENODEV;
-	}
-
 	udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
 	if (udc_controller == NULL) {
 		ERR("malloc udc failed\n");
@@ -2511,7 +2507,9 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 		dr_controller_setup(udc_controller);
 	}
 
-	fsl_udc_clk_finalize(pdev);
+	ret = fsl_udc_clk_finalize(pdev);
+	if (ret)
+		goto err_free_irq;
 
 	/* Setup gadget structure */
 	udc_controller->gadget.ops = &fsl_gadget_ops;
@@ -2720,22 +2718,32 @@ static int fsl_udc_otg_resume(struct device *dev)
 
 	return fsl_udc_resume(NULL);
 }
-
 /*-------------------------------------------------------------------------
 	Register entry point for the peripheral controller driver
 --------------------------------------------------------------------------*/
-
+static const struct platform_device_id fsl_udc_devtype[] = {
+	{
+		.name = "imx-udc-mx27",
+	}, {
+		.name = "imx-udc-mx51",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
 static struct platform_driver udc_driver = {
-	.remove  = __exit_p(fsl_udc_remove),
+	.remove		= __exit_p(fsl_udc_remove),
+	/* Just for FSL i.mx SoC currently */
+	.id_table	= fsl_udc_devtype,
 	/* these suspend and resume are not usb suspend and resume */
-	.suspend = fsl_udc_suspend,
-	.resume  = fsl_udc_resume,
-	.driver  = {
-		.name = (char *)driver_name,
-		.owner = THIS_MODULE,
-		/* udc suspend/resume called from OTG driver */
-		.suspend = fsl_udc_otg_suspend,
-		.resume  = fsl_udc_otg_resume,
+	.suspend	= fsl_udc_suspend,
+	.resume		= fsl_udc_resume,
+	.driver		= {
+			.name = (char *)driver_name,
+			.owner = THIS_MODULE,
+			/* udc suspend/resume called from OTG driver */
+			.suspend = fsl_udc_otg_suspend,
+			.resume  = fsl_udc_otg_resume,
 	},
 };
 
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index f61a967f7082..c6703bb07b23 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -592,15 +592,16 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
 struct platform_device;
 #ifdef CONFIG_ARCH_MXC
 int fsl_udc_clk_init(struct platform_device *pdev);
-void fsl_udc_clk_finalize(struct platform_device *pdev);
+int fsl_udc_clk_finalize(struct platform_device *pdev);
 void fsl_udc_clk_release(void);
 #else
 static inline int fsl_udc_clk_init(struct platform_device *pdev)
 {
 	return 0;
 }
-static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+static inline int fsl_udc_clk_finalize(struct platform_device *pdev)
 {
+	return 0;
 }
 static inline void fsl_udc_clk_release(void)
 {
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d6bb128ce21e..3a21c5d683c0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -148,7 +148,7 @@ config USB_EHCI_FSL
 	  Variation of ARC USB block used in some Freescale chips.
 
 config USB_EHCI_MXC
-	bool "Support for Freescale i.MX on-chip EHCI USB controller"
+	tristate "Support for Freescale i.MX on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && ARCH_MXC
 	select USB_EHCI_ROOT_HUB_TT
 	---help---
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 1eb4c3006e9e..001fbff2fdef 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PCI)		+= pci-quirks.o
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
 obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
+obj-$(CONFIG_USB_EHCI_MXC)	+= ehci-mxc.o
 
 obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c97503bb0b0e..09537b2f1002 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -74,10 +74,6 @@ static const char	hcd_name [] = "ehci_hcd";
 #undef VERBOSE_DEBUG
 #undef EHCI_URB_TRACE
 
-#ifdef DEBUG
-#define EHCI_STATS
-#endif
-
 /* magic numbers that can affect system performance */
 #define	EHCI_TUNE_CERR		3	/* 0-3 qtd retries; 0 == don't stop */
 #define	EHCI_TUNE_RL_HS		4	/* nak throttle; see 4.9 */
@@ -1250,11 +1246,6 @@ MODULE_LICENSE ("GPL");
 #define	PLATFORM_DRIVER		ehci_fsl_driver
 #endif
 
-#ifdef CONFIG_USB_EHCI_MXC
-#include "ehci-mxc.c"
-#define PLATFORM_DRIVER		ehci_mxc_driver
-#endif
-
 #ifdef CONFIG_USB_EHCI_SH
 #include "ehci-sh.c"
 #define PLATFORM_DRIVER		ehci_hcd_sh_driver
@@ -1352,7 +1343,8 @@ MODULE_LICENSE ("GPL");
 
 #if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
 	!IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
-	!defined(CONFIG_USB_CHIPIDEA_HOST) && \
+	!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
+	!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
 	!defined(PLATFORM_DRIVER) && \
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
 	!defined(OF_PLATFORM_DRIVER) && \
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 6b8c1584065f..c6dc4655e0a5 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -17,75 +17,38 @@
  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
 #include <linux/platform_data/usb-ehci-mxc.h>
 
 #include <asm/mach-types.h>
 
+#include "ehci.h"
+
+#define DRIVER_DESC "Freescale On-Chip EHCI Host driver"
+
+static const char hcd_name[] = "ehci-mxc";
+
 #define ULPI_VIEWPORT_OFFSET	0x170
 
 struct ehci_mxc_priv {
 	struct clk *usbclk, *ahbclk, *phyclk;
-	struct usb_hcd *hcd;
 };
 
-/* called during probe() after chip reset completes */
-static int ehci_mxc_setup(struct usb_hcd *hcd)
-{
-	hcd->has_tt = 1;
-
-	return ehci_setup(hcd);
-}
+static struct hc_driver __read_mostly ehci_mxc_hc_driver;
 
-static const struct hc_driver ehci_mxc_hc_driver = {
-	.description = hcd_name,
-	.product_desc = "Freescale On-Chip EHCI Host Controller",
-	.hcd_priv_size = sizeof(struct ehci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq = ehci_irq,
-	.flags = HCD_USB2 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset = ehci_mxc_setup,
-	.start = ehci_run,
-	.stop = ehci_stop,
-	.shutdown = ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue = ehci_urb_enqueue,
-	.urb_dequeue = ehci_urb_dequeue,
-	.endpoint_disable = ehci_endpoint_disable,
-	.endpoint_reset = ehci_endpoint_reset,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number = ehci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data = ehci_hub_status_data,
-	.hub_control = ehci_hub_control,
-	.bus_suspend = ehci_bus_suspend,
-	.bus_resume = ehci_bus_resume,
-	.relinquish_port = ehci_relinquish_port,
-	.port_handed_over = ehci_port_handed_over,
-
-	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = {
+	.extra_priv_size =	sizeof(struct ehci_mxc_priv),
 };
 
 static int ehci_mxc_drv_probe(struct platform_device *pdev)
@@ -111,12 +74,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	if (!hcd)
 		return -ENOMEM;
 
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		ret = -ENOMEM;
-		goto err_alloc;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "Found HC with no register addr. Check setup!\n");
@@ -134,6 +91,10 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		goto err_alloc;
 	}
 
+	hcd->has_tt = 1;
+	ehci = hcd_to_ehci(hcd);
+	priv = (struct ehci_mxc_priv *) ehci->priv;
+
 	/* enable clocks */
 	priv->usbclk = devm_clk_get(&pdev->dev, "ipg");
 	if (IS_ERR(priv->usbclk)) {
@@ -168,8 +129,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		mdelay(10);
 	}
 
-	ehci = hcd_to_ehci(hcd);
-
 	/* EHCI registers start at offset 0x100 */
 	ehci->caps = hcd->regs + 0x100;
 	ehci->regs = hcd->regs + 0x100 +
@@ -197,8 +156,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		}
 	}
 
-	priv->hcd = hcd;
-	platform_set_drvdata(pdev, priv);
+	platform_set_drvdata(pdev, hcd);
 
 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
@@ -224,8 +182,11 @@ err_alloc:
 static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
 {
 	struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
-	struct ehci_mxc_priv *priv = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = priv->hcd;
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct ehci_mxc_priv *priv = (struct ehci_mxc_priv *) ehci->priv;
+
+	usb_remove_hcd(hcd);
 
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
@@ -233,23 +194,20 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
 	if (pdata->otg)
 		usb_phy_shutdown(pdata->otg);
 
-	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
-	platform_set_drvdata(pdev, NULL);
-
 	clk_disable_unprepare(priv->usbclk);
 	clk_disable_unprepare(priv->ahbclk);
 
 	if (priv->phyclk)
 		clk_disable_unprepare(priv->phyclk);
 
+	usb_put_hcd(hcd);
+	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
 
 static void ehci_mxc_drv_shutdown(struct platform_device *pdev)
 {
-	struct ehci_mxc_priv *priv = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = priv->hcd;
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	if (hcd->driver->shutdown)
 		hcd->driver->shutdown(hcd);
@@ -259,9 +217,31 @@ MODULE_ALIAS("platform:mxc-ehci");
 
 static struct platform_driver ehci_mxc_driver = {
 	.probe = ehci_mxc_drv_probe,
-	.remove = __exit_p(ehci_mxc_drv_remove),
+	.remove = ehci_mxc_drv_remove,
 	.shutdown = ehci_mxc_drv_shutdown,
 	.driver = {
 		   .name = "mxc-ehci",
 	},
 };
+
+static int __init ehci_mxc_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ehci_init_driver(&ehci_mxc_hc_driver, &ehci_mxc_overrides);
+	return platform_driver_register(&ehci_mxc_driver);
+}
+module_init(ehci_mxc_init);
+
+static void __exit ehci_mxc_cleanup(void)
+{
+	platform_driver_unregister(&ehci_mxc_driver);
+}
+module_exit(ehci_mxc_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Sascha Hauer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 9dadc7118d68..36c3a8210595 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -38,6 +38,10 @@ typedef __u16 __bitwise __hc16;
 #endif
 
 /* statistics can be kept for tuning/monitoring */
+#ifdef DEBUG
+#define EHCI_STATS
+#endif
+
 struct ehci_stats {
 	/* irq usage */
 	unsigned long		normal;
@@ -221,6 +225,9 @@ struct ehci_hcd {			/* one per controller */
 #ifdef DEBUG
 	struct dentry		*debug_dir;
 #endif
+
+	/* platform-specific data -- must come last */
+	unsigned long		priv[0] __aligned(sizeof(s64));
 };
 
 /* convert between an HCD pointer and the corresponding EHCI_HCD */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 01628e39cc8b..4a86b63745b8 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -447,6 +447,10 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
 		return IRQ_NONE;
 	uhci_writew(uhci, status, USBSTS);		/* Clear it */
 
+	spin_lock(&uhci->lock);
+	if (unlikely(!uhci->is_initialized))	/* not yet configured */
+		goto done;
+
 	if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
 		if (status & USBSTS_HSE)
 			dev_err(uhci_dev(uhci),
@@ -455,7 +459,6 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
 			dev_err(uhci_dev(uhci),
 				"host controller process error, something bad happened!\n");
 		if (status & USBSTS_HCH) {
-			spin_lock(&uhci->lock);
 			if (uhci->rh_state >= UHCI_RH_RUNNING) {
 				dev_err(uhci_dev(uhci),
 					"host controller halted, very bad!\n");
@@ -472,15 +475,15 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
 				 * pending unlinks */
 				mod_timer(&hcd->rh_timer, jiffies);
 			}
-			spin_unlock(&uhci->lock);
 		}
 	}
 
-	if (status & USBSTS_RD)
+	if (status & USBSTS_RD) {
+		spin_unlock(&uhci->lock);
 		usb_hcd_poll_rh_status(hcd);
-	else {
-		spin_lock(&uhci->lock);
+	} else {
 		uhci_scan_schedule(uhci);
+ done:
 		spin_unlock(&uhci->lock);
 	}
 
@@ -661,9 +664,9 @@ static int uhci_start(struct usb_hcd *hcd)
 	 */
 	mb();
 
+	spin_lock_irq(&uhci->lock);
 	configure_hc(uhci);
 	uhci->is_initialized = 1;
-	spin_lock_irq(&uhci->lock);
 	start_rh(uhci);
 	spin_unlock_irq(&uhci->lock);
 	return 0;
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 0968dd7a859d..f522000e8f06 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -105,7 +105,7 @@ static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr)
 	musb_writel(&tx->tx_complete, 0, ptr);
 }
 
-static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
+static void cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
 {
 	int	j;
 
@@ -150,7 +150,7 @@ static void cppi_pool_free(struct cppi_channel *c)
 	c->last_processed = NULL;
 }
 
-static int __init cppi_controller_start(struct dma_controller *c)
+static int cppi_controller_start(struct dma_controller *c)
 {
 	struct cppi	*controller;
 	void __iomem	*tibase;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 4d21789e1ba4..b51abfd87cc6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -449,6 +449,10 @@ static void option_instat_callback(struct urb *urb);
 #define PETATEL_VENDOR_ID			0x1ff4
 #define PETATEL_PRODUCT_NP10T			0x600e
 
+/* TP-LINK Incorporated products */
+#define TPLINK_VENDOR_ID			0x2357
+#define TPLINK_PRODUCT_MA180			0x0201
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -931,7 +935,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
 	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
@@ -1319,6 +1324,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);