usb: storage: fix multi-line comment style

No functional changes here, just making sure our
storage driver uses a consistent multi-line comment
style.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 220 insertions, 114 deletions

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7ffe4209067b..aa3539238848 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  * Unusual Devices File
  *
  * Current development and maintenance by:
@@ -25,13 +26,15 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-/* IMPORTANT NOTE: This file must be included in another file which does
+/*
+ * IMPORTANT NOTE: This file must be included in another file which does
  * the following thing for it to work:
  * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
  * before this file is included.
  */
 
-/* If you edit this file, please try to keep it sorted first by VendorID,
+/*
+ * If you edit this file, please try to keep it sorted first by VendorID,
  * then by ProductID.
  *
  * If you want to add an entry for this file, be sure to include the
@@ -47,13 +50,15 @@
  * <usb-storage@lists.one-eyed-alien.net>
  */
 
-/* Note: If you add an entry only in order to set the CAPACITY_OK flag,
+/*
+ * Note: If you add an entry only in order to set the CAPACITY_OK flag,
  * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV.  This is
  * because such entries mark devices which actually work correctly,
  * as opposed to devices that do something strangely or wrongly.
  */
 
-/* In-kernel mode switching is deprecated.  Do not add new devices to
+/*
+ * In-kernel mode switching is deprecated.  Do not add new devices to
  * this list for the sole purpose of switching them to a different
  * mode.  Existing userspace solutions are superior.
  *
@@ -66,8 +71,7 @@
 #define NO_SDDR09
 #endif
 
-/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
- */
+/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> */
 UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
 		"ATMEL",
 		"SND1 Storage",
@@ -93,7 +97,8 @@ UNUSUAL_DEV(  0x03f0, 0x070c, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE ),
 
-/* Reported by Grant Grundler <grundler@parisc-linux.org>
+/*
+ * Reported by Grant Grundler <grundler@parisc-linux.org>
  * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
  */
 UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
@@ -107,7 +112,8 @@ UNUSUAL_DEV(  0x03f3, 0x0001, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
+/*
+ * Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
  * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
  * for USB floppies that need the SINGLE_LUN enforcement.
  */
@@ -124,7 +130,8 @@ UNUSUAL_DEV(  0x040d, 0x6205, 0x0003, 0x0003,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Deduced by Jonathan Woithe <jwoithe@just42.net>
+/*
+ * Deduced by Jonathan Woithe <jwoithe@just42.net>
  * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
  * always fails and confuses drive.
  */
@@ -167,8 +174,10 @@ UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Andrew Nayenko <relan@bk.ru>
- * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
+/*
+ * Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com>
+ */
 UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0610,
 		"Nokia",
 		"Nokia 6288",
@@ -196,16 +205,20 @@ UNUSUAL_DEV(  0x0421, 0x0434, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
- * Einar Th. Einarsson <einarthered@gmail.com> */
+/*
+ * Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com>
+ */
 UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
 		"Nokia",
 		"N91",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
-/* Reported by Jiri Slaby <jirislaby@gmail.com> and
- * Rene C. Castberg <Rene@Castberg.org> */
+/*
+ * Reported by Jiri Slaby <jirislaby@gmail.com> and
+ * Rene C. Castberg <Rene@Castberg.org>
+ */
 UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
 		"Nokia",
 		"N80",
@@ -269,8 +282,10 @@ UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 		US_FL_SINGLE_LUN ),
 #endif
 
-/* Patch submitted by Daniel Drake <dsd@gentoo.org>
- * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
+/*
+ * Patch submitted by Daniel Drake <dsd@gentoo.org>
+ * Device reports nonsense bInterfaceProtocol 6 when connected over USB2
+ */
 UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
 		"Neuros Audio",
 		"USB 2.0 HD 2.5",
@@ -288,17 +303,18 @@ UNUSUAL_DEV(  0x0457, 0x0150, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
 /*
-* Bohdan Linda <bohdan.linda@gmail.com>
-* 1GB USB sticks MyFlash High Speed. I have restricted
-* the revision to my model only
-*/
+ * Bohdan Linda <bohdan.linda@gmail.com>
+ * 1GB USB sticks MyFlash High Speed. I have restricted
+ * the revision to my model only
+ */
 UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
 		"USB 2.0",
 		"Flash Disk",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE ),
 
-/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+/*
+ * Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
  * Obviously the PROM has not been customized by the VAR;
  * the Vendor and Product string descriptors are:
  *	Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
@@ -347,24 +363,30 @@ UNUSUAL_DEV(  0x0482, 0x0107, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
 
-/* Reported by Paul Stewart <stewart@wetlogic.net>
- * This entry is needed because the device reports Sub=ff */
+/*
+ * Reported by Paul Stewart <stewart@wetlogic.net>
+ * This entry is needed because the device reports Sub=ff
+ */
 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
 		"Hitachi",
 		"DVD-CAM DZ-MV100A Camcorder",
 		USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN),
 
-/* BENQ DC5330
+/*
+ * BENQ DC5330
  * Reported by Manuel Fombuena <mfombuena@ya.com> and
- * Frank Copeland <fjc@thingy.apana.org.au> */
+ * Frank Copeland <fjc@thingy.apana.org.au>
+ */
 UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"300_CAMERA",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Patch for Nikon coolpix 2000
- * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
+/*
+ * Patch for Nikon coolpix 2000
+ * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>
+ */
 UNUSUAL_DEV(  0x04b0, 0x0301, 0x0010, 0x0010,
 		"NIKON",
 		"NIKON DSC E2000",
@@ -378,21 +400,26 @@ UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
 		USB_SC_DEVICE, USB_PR_CB, NULL,
 		US_FL_MAX_SECTORS_MIN),
 
-/* Reported by Simon Levitt <simon@whattf.com>
- * This entry needs Sub and Proto fields */
+/*
+ * Reported by Simon Levitt <simon@whattf.com>
+ * This entry needs Sub and Proto fields
+ */
 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
 		"Epson",
 		"875DC Storage",
 		USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
 
-/* Reported by Khalid Aziz <khalid@gonehiking.org>
- * This entry is needed because the device reports Sub=ff */
+/*
+ * Reported by Khalid Aziz <khalid@gonehiking.org>
+ * This entry is needed because the device reports Sub=ff
+ */
 UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
 		"Epson",
 		"785EPX Storage",
 		USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
 
-/* Not sure who reported this originally but
+/*
+ * Not sure who reported this originally but
  * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
  * flag be added */
 UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
@@ -400,7 +427,8 @@ UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
 		"FinePix 1400Zoom",
 		USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 
-/* Reported by Ondrej Zary <linux@rainbow-software.org>
+/*
+ * Reported by Ondrej Zary <linux@rainbow-software.org>
  * The device reports one sector more and breaks when that sector is accessed
  */
 UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
@@ -409,7 +437,8 @@ UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
-/* Reported by Kriston Fincher <kriston@airmail.net>
+/*
+ * Reported by Kriston Fincher <kriston@airmail.net>
  * Patch submitted by Sean Millichamp <sean@bruenor.org>
  * This is to support the Panasonic PalmCam PV-SD4090
  * This entry is needed because the device reports Sub=ff 
@@ -419,8 +448,10 @@ UNUSUAL_DEV(  0x04da, 0x0901, 0x0100, 0x0200,
 		"LS-120 Camera",
 		USB_SC_UFI, USB_PR_DEVICE, NULL, 0),
 
-/* From Yukihiro Nakai, via zaitcev@yahoo.com.
- * This is needed for CB instead of CBI */
+/*
+ * From Yukihiro Nakai, via zaitcev@yahoo.com.
+ * This is needed for CB instead of CBI
+ */
 UNUSUAL_DEV(  0x04da, 0x0d05, 0x0000, 0x0000,
 		"Sharp CE-CW05",
 		"CD-R/RW Drive",
@@ -440,7 +471,8 @@ UNUSUAL_DEV(  0x04da, 0x2373, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 
-/* Most of the following entries were developed with the help of
+/*
+ * Most of the following entries were developed with the help of
  * Shuttle/SCM directly.
  */
 UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200,
@@ -536,7 +568,8 @@ UNUSUAL_DEV(  0x04e8, 0x5136, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64),
 
-/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+/*
+ * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
  */
@@ -553,7 +586,8 @@ UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Iomega Clik! Drive 
+/*
+ * Iomega Clik! Drive 
  * Reported by David Chatenay <dchatenay@hotmail.com>
  * The reason this is needed is not fully known.
  */
@@ -570,7 +604,8 @@ COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_CAPACITY_OK ),
 
-/* Yakumo Mega Image 37
+/*
+ * Yakumo Mega Image 37
  * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
 UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
@@ -578,8 +613,10 @@ UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Another Yakumo camera.
- * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
+/*
+ * Another Yakumo camera.
+ * Reported by Michele Alzetta <michele.alzetta@aliceposta.it>
+ */
 UNUSUAL_DEV(  0x052b, 0x1804, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"300_CAMERA",
@@ -593,16 +630,20 @@ UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Yakumo Mega Image 47
- * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
+/*
+ * Yakumo Mega Image 47
+ * Reported by Bjoern Paetzel <kolrabi@kolrabi.de>
+ */
 UNUSUAL_DEV(  0x052b, 0x1905, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"400_CAMERA",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Paul Ortyl <ortylp@3miasto.net>
- * Note that it's similar to the device above, only different prodID */
+/*
+ * Reported by Paul Ortyl <ortylp@3miasto.net>
+ * Note that it's similar to the device above, only different prodID
+ */
 UNUSUAL_DEV(  0x052b, 0x1911, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"400_CAMERA",
@@ -615,8 +656,10 @@ UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 		USB_SC_SCSI, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 
-/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
- * This entry is needed because the device reports Sub=ff */
+/*
+ * Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff
+ */
 UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
 		"Sony",
 		"DSC-T1/T5/H5",
@@ -719,7 +762,8 @@ UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
 		USB_SC_DEVICE,  USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN),
 
-/* Reported by Johann Cardon <johann.cardon@free.fr>
+/*
+ * Reported by Johann Cardon <johann.cardon@free.fr>
  * This entry is needed only because the device reports
  * bInterfaceClass = 0xff (vendor-specific)
  */
@@ -741,7 +785,8 @@ UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
 		"Digital Camera EX-20 DSC",
 		USB_SC_8070, USB_PR_DEVICE, NULL, 0 ),
 
-/* Reported by Andre Welter <a.r.welter@gmx.de>
+/*
+ * Reported by Andre Welter <a.r.welter@gmx.de>
  * This antique device predates the release of the Bulk-only Transport
  * spec, and if it gets a Get-Max-LUN then it requires the host to do a
  * Clear-Halt on the bulk endpoints.  The SINGLE_LUN flag will prevent
@@ -773,7 +818,8 @@ UNUSUAL_DEV(  0x059f, 0x0651, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
-/* Submitted by Joel Bourquard <numlock@freesurf.ch>
+/*
+ * Submitted by Joel Bourquard <numlock@freesurf.ch>
  * Some versions of this device need the SubClass and Protocol overrides
  * while others don't.
  */
@@ -783,7 +829,8 @@ UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
 		USB_SC_SCSI, USB_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
-/* Submitted by Sven Anderson <sven-linux@anderson.de>
+/*
+ * Submitted by Sven Anderson <sven-linux@anderson.de>
  * There are at least four ProductIDs used for iPods, so I added 0x1202 and
  * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
  * to change with firmware updates, I changed the range to maximum for all
@@ -824,7 +871,8 @@ UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
-/* Reported by Dan Williams <dcbw@redhat.com>
+/*
+ * Reported by Dan Williams <dcbw@redhat.com>
  * Option N.V. mobile broadband modems
  * Ignore driver CD mode and force into modem mode by default.
  */
@@ -843,7 +891,8 @@ UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
-/* The following two entries are for a Genesys USB to IDE
+/*
+ * The following two entries are for a Genesys USB to IDE
  * converter chip, but it changes its ProductId depending
  * on whether or not a disk or an optical device is enclosed
  * They were originally reported by Alexander Oltu
@@ -873,8 +922,10 @@ UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE ),
 
-/* Reported by Hanno Boeck <hanno@gmx.de>
- * Taken from the Lycoris Kernel */
+/*
+ * Reported by Hanno Boeck <hanno@gmx.de>
+ * Taken from the Lycoris Kernel
+ */
 UNUSUAL_DEV(  0x0636, 0x0003, 0x0000, 0x9999,
 		"Vivitar",
 		"Vivicam 35Xx",
@@ -908,8 +959,10 @@ UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
 		US_FL_NOT_LOCKABLE ),
 
 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
-/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
- * Thomas Bartosik <tbartdev@gmx-topmail.de> */
+/*
+ * Change to bcdDeviceMin (0x0100 to 0x0001) reported by
+ * Thomas Bartosik <tbartdev@gmx-topmail.de>
+ */
 UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
 		"Prolific Technology Inc.",
 		"Mass Storage Device",
@@ -961,7 +1014,8 @@ UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
 		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 |
 		US_FL_NO_READ_CAPACITY_16),
 
-/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+/*
+ * Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
  * Support the following product :
  *    "Dane-Elec MediaTouch"
  */
@@ -971,7 +1025,8 @@ UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
 
-/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
+/*
+ * Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
  * This USB MP3/AVI player device fails and disconnects if more than 128
  * sectors (64kB) are read/written in a single command, and may be present
  * at least in the following products:
@@ -1040,7 +1095,8 @@ UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		US_FL_SINGLE_LUN ),
 #endif
 
-/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
+/*
+ * Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
  * Only revision 1.13 tested (same for all of the above devices,
  * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
  * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
@@ -1052,7 +1108,8 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
 
-/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+/*
+ * Reported by Rauch Wolke <rauchwolke@gmx.net>
  * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
  */
 UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
@@ -1061,7 +1118,8 @@ UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
 
-/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
+/*
+ * Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
  * to the USB storage specification in two ways:
  * - They tell us they are using transport protocol CBI. In reality they
  *   are using transport protocol CB.
@@ -1119,7 +1177,8 @@ UNUSUAL_DEV(  0x084b, 0xa001, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+/*
+ * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Flag will support Bulk devices which use a standards-violating 32-byte
  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
  * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
@@ -1131,7 +1190,8 @@ UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK32),
 
-/* Reported by <ttkspam@free.fr>
+/*
+ * Reported by <ttkspam@free.fr>
  * The device reports a vendor-specific device class, requiring an
  * explicit vendor/product match.
  */
@@ -1140,11 +1200,12 @@ UNUSUAL_DEV(  0x0851, 0x1542, 0x0002, 0x0002,
 		"FW_Omega2",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
 
-/* Andrew Lunn <andrew@lunn.ch>
+/*
+ * Andrew Lunn <andrew@lunn.ch>
  * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
  * on LUN 4.
  * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
-*/
+ */
 UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
 		"PanDigital",
 		"Photo Frame",
@@ -1170,7 +1231,8 @@ UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN),
 
-/* Submitted by Dylan Taft <d13f00l@gmail.com>
+/*
+ * Submitted by Dylan Taft <d13f00l@gmail.com>
  * US_FL_IGNORE_RESIDUE Needed
  */
 UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
@@ -1179,7 +1241,8 @@ UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE),
 
-/* Entry needed for flags. Moreover, all devices with this ID use
+/*
+ * Entry needed for flags. Moreover, all devices with this ID use
  * bulk-only transport, but _some_ falsely report Control/Bulk instead.
  * One example is "Trumpion Digital Research MYMP3".
  * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
@@ -1190,7 +1253,8 @@ UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
-/* Reported by Filippo Bardelli <filibard@libero.it>
+/*
+ * Reported by Filippo Bardelli <filibard@libero.it>
  * The device reports a subclass of RBC, which is wrong.
  */
 UNUSUAL_DEV(  0x090a, 0x1050, 0x0100, 0x0100,
@@ -1213,7 +1277,8 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
-/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+/*
+ * Reported by Paul Hartman <paul.hartman+linux@gmail.com>
  * This card reader returns "Illegal Request, Logical Block Address
  * Out of Range" for the first READ(10) after a new card is inserted.
  */
@@ -1223,7 +1288,8 @@ UNUSUAL_DEV(  0x090c, 0x6000, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_INITIAL_READ10 ),
 
-/* This Pentax still camera is not conformant
+/*
+ * This Pentax still camera is not conformant
  * to the USB storage specification: -
  * - It does not like the INQUIRY command. So we must handle this command
  *   of the SCSI layer ourselves.
@@ -1236,8 +1302,10 @@ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
-/* These are virtual windows driver CDs, which the zd1211rw driver
- * automatically converts into WLAN devices. */
+/*
+ * These are virtual windows driver CDs, which the zd1211rw driver
+ * automatically converts into WLAN devices.
+ */
 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
 		"ZyXEL",
 		"G-220F USB-WLAN Install",
@@ -1250,7 +1318,8 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_DEVICE ),
 
-/* Reported by Dan Williams <dcbw@redhat.com>
+/*
+ * Reported by Dan Williams <dcbw@redhat.com>
  * Option N.V. mobile broadband modems
  * Ignore driver CD mode and force into modem mode by default.
  */
@@ -1262,20 +1331,24 @@ UNUSUAL_DEV(  0x0af0, 0x6971, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
 		0),
 
-/* Reported by F. Aben <f.aben@option.com>
+/*
+ * Reported by F. Aben <f.aben@option.com>
  * This device (wrongly) has a vendor-specific device descriptor.
  * The entry is needed so usb-storage can bind to it's mass-storage
- * interface as an interface driver */
+ * interface as an interface driver
+ */
 UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
 		"Option",
 		"GI 0401 SD-Card",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
-/* Reported by Jan Dumon <j.dumon@option.com>
+/*
+ * Reported by Jan Dumon <j.dumon@option.com>
  * These devices (wrongly) have a vendor-specific device descriptor.
  * These entries are needed so usb-storage can bind to their mass-storage
- * interface as an interface driver */
+ * interface as an interface driver
+ */
 UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
 		"Option",
 		"GI 0431 SD-Card",
@@ -1419,7 +1492,8 @@ UNUSUAL_DEV(  0x0dc4, 0x0073, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
-/* Reported by Lubomir Blaha <tritol@trilogic.cz>
+/*
+ * Reported by Lubomir Blaha <tritol@trilogic.cz>
  * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
  * works for me. Can anybody correct these values? (I able to test corrected
  * version.)
@@ -1430,8 +1504,10 @@ UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
-/* Reported by Edward Chapman (taken from linux-usb mailing list)
-   Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
+/*
+ * Reported by Edward Chapman (taken from linux-usb mailing list)
+ * Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive
+ */
 UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
 		"Netac",
 		"USB Flash Disk",
@@ -1439,8 +1515,10 @@ UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
 		US_FL_IGNORE_RESIDUE ),
 
 
-/* Patch by Stephan Walter <stephan.walter@epfl.ch>
- * I don't know why, but it works... */
+/*
+ * Patch by Stephan Walter <stephan.walter@epfl.ch>
+ * I don't know why, but it works...
+ */
 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
 		"WINWARD",
 		"Music Disk",
@@ -1468,8 +1546,10 @@ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
-/* Submitted by Daniel Drake <dsd@gentoo.org>
- * Reported by dayul on the Gentoo Forums */
+/*
+ * Submitted by Daniel Drake <dsd@gentoo.org>
+ * Reported by dayul on the Gentoo Forums
+ */
 UNUSUAL_DEV(  0x0ea0, 0x2168, 0x0110, 0x0110,
 		"Ours Technology",
 		"Flash Disk",
@@ -1483,15 +1563,18 @@ UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Benjamin Schiller <sbenni@gmx.de>
- * It is also sold by Easylite as DJ 20 */
+/*
+ * Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20
+ */
 UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
 		"Typhoon",
 		"My DJ 1820",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
 
-/* Patch by Leonid Petrov mail at lpetrov.net
+/*
+ * Patch by Leonid Petrov mail at lpetrov.net
  * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
  * http://www.qbik.ch/usb/devices/showdev.php?id=1705
  * Updated to 103 device by MJ Ray mjr at phonecoop.coop
@@ -1502,7 +1585,8 @@ UNUSUAL_DEV(  0x0f19, 0x0103, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* David Kuehling <dvdkhlng@gmx.de>:
+/*
+ * David Kuehling <dvdkhlng@gmx.de>:
  * for MP3-Player AVOX WSX-300ER (bought in Japan).  Reports lots of SCSI
  * errors when trying to write.
  */
@@ -1540,8 +1624,10 @@ UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_DEVICE),
 
-/* Reported by Jan Mate <mate@fiit.stuba.sk>
- * and by Soeren Sonnenburg <kernel@nn7.de> */
+/*
+ * Reported by Jan Mate <mate@fiit.stuba.sk>
+ * and by Soeren Sonnenburg <kernel@nn7.de>
+ */
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"P990i",
@@ -1562,7 +1648,8 @@ UNUSUAL_DEV(  0x0fce, 0xe092, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
+/*
+ * Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
  * Tested on hardware version 1.10.
  * Entry is needed only for the initializer function override.
  * Devices with bcd > 110 seem to not need it while those
@@ -1586,7 +1673,8 @@ UNUSUAL_DEV(0x1058, 0x070a, 0x0000, 0x9999,
 		"My Passport HDD",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE),
 
-/* Reported by Fabio Venturi <f.venturi@tdnet.it>
+/*
+ * Reported by Fabio Venturi <f.venturi@tdnet.it>
  * The device reports a vendor-specific bDeviceClass.
  */
 UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
@@ -1595,7 +1683,8 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0),
 
-/* Reported by Pascal Terjan <pterjan@mandriva.com>
+/*
+ * Reported by Pascal Terjan <pterjan@mandriva.com>
  * Ignore driver CD mode and force into modem mode by default.
  */
 UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
@@ -1603,7 +1692,8 @@ UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
            "USB Mass Storage",
            USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
 
-/* Reported by Kevin Lloyd <linux@sierrawireless.com>
+/*
+ * Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
  * device.
@@ -1614,7 +1704,8 @@ UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init,
 		0),
 
-/* Reported by Jaco Kroon <jaco@kroon.co.za>
+/*
+ * Reported by Jaco Kroon <jaco@kroon.co.za>
  * The usb-storage module found on the Digitech GNX4 (and supposedly other
  * devices) misbehaves and causes a bunch of invalid I/O errors.
  */
@@ -1624,7 +1715,8 @@ UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by fangxiaozhi <huananhu@huawei.com>
+/*
+ * Reported by fangxiaozhi <huananhu@huawei.com>
  * This brings the HUAWEI data card devices into multi-port mode
  */
 UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
@@ -1993,7 +2085,8 @@ UNUSUAL_DEV(  0x152d, 0x0567, 0x0114, 0x0116,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BROKEN_FUA ),
 
-/* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
+/*
+ * Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
  * JMicron responds to USN and several other SCSI ioctls with a
  * residue that causes subsequent I/O requests to fail.  */
 UNUSUAL_DEV(  0x152d, 0x2329, 0x0100, 0x0100,
@@ -2009,7 +2102,8 @@ UNUSUAL_DEV(  0x152d, 0x2566, 0x0114, 0x0114,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BROKEN_FUA ),
 
-/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+/*
+ * Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
  * and Mac USB Dock USB-SCSI */
 UNUSUAL_DEV(  0x1645, 0x0007, 0x0100, 0x0133,
 		"Entrega Technologies",
@@ -2017,8 +2111,10 @@ UNUSUAL_DEV(  0x1645, 0x0007, 0x0100, 0x0133,
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Reported by Robert Schedel <r.schedel@yahoo.de>
- * Note: this is a 'super top' device like the above 14cd/6600 device */
+/*
+ * Reported by Robert Schedel <r.schedel@yahoo.de>
+ * Note: this is a 'super top' device like the above 14cd/6600 device
+ */
 UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
 		"Teac",
 		"HD-35PUK-B",
@@ -2045,10 +2141,12 @@ UNUSUAL_DEV(  0x1822, 0x0001, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Reported by Hans de Goede <hdegoede@redhat.com>
+/*
+ * Reported by Hans de Goede <hdegoede@redhat.com>
  * These Appotech controllers are found in Picture Frames, they provide a
  * (buggy) emulation of a cdrom drive which contains the windows software
- * Uploading of pictures happens over the corresponding /dev/sg device. */
+ * Uploading of pictures happens over the corresponding /dev/sg device.
+ */
 UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000,
 		"BUILDWIN",
 		"Photo Frame",
@@ -2065,19 +2163,22 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_READ_DISC_INFO ),
 
-/* Reported by Oliver Neukum <oneukum@suse.com>
+/*
+ * Reported by Oliver Neukum <oneukum@suse.com>
  * This device morphes spontaneously into another device if the access
  * pattern of Windows isn't followed. Thus writable media would be dirty
  * if the initial instance is used. So the device is limited to its
  * virtual CD.
- * And yes, the concept that BCD goes up to 9 is not heeded */
+ * And yes, the concept that BCD goes up to 9 is not heeded
+ */
 UNUSUAL_DEV( 0x19d2, 0x1225, 0x0000, 0xffff,
 		"ZTE,Incorporated",
 		"ZTE WCDMA Technologies MSM",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-/* Reported by Sven Geggus <sven-usbst@geggus.net>
+/*
+ * Reported by Sven Geggus <sven-usbst@geggus.net>
  * This encrypted pen drive returns bogus data for the initial READ(10).
  */
 UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
@@ -2086,7 +2187,8 @@ UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_INITIAL_READ10 ),
 
-/* Reported by Hans de Goede <hdegoede@redhat.com>
+/*
+ * Reported by Hans de Goede <hdegoede@redhat.com>
  * These are mini projectors using USB for both power and video data transport
  * The usb-storage interface is a virtual windows driver CD, which the gm12u320
  * driver automatically converts into framebuffer & kms dri device nodes.
@@ -2097,9 +2199,11 @@ UNUSUAL_DEV( 0x1de1, 0xc102, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_DEVICE ),
 
-/* Patch by Richard Schütz <r.schtz@t-online.de>
+/*
+ * Patch by Richard Schütz <r.schtz@t-online.de>
  * This external hard drive enclosure uses a JMicron chip which
- * needs the US_FL_IGNORE_RESIDUE flag to work properly. */
+ * needs the US_FL_IGNORE_RESIDUE flag to work properly.
+ */
 UNUSUAL_DEV(  0x1e68, 0x001b, 0x0000, 0x0000,
 		"TrekStor GmbH & Co. KG",
 		"DataStation maxi g.u",
@@ -2126,7 +2230,8 @@ UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
-/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+/*
+ * patch submitted by Davide Perini <perini.davide@dpsoftware.org>
  * and Renato Perini <rperini@email.it>
  */
 UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
@@ -2153,7 +2258,8 @@ UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_GO_SLOW ),
 
-/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
+/*
+ * Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
  * Mio Moov 330
  */
 UNUSUAL_DEV(  0x3340, 0xffff, 0x0000, 0x0000,