summaryrefslogtreecommitdiff
path: root/drivers/thunderbolt
diff options
context:
space:
mode:
authorMika Westerberg <mika.westerberg@linux.intel.com>2023-03-24 13:04:39 +0200
committerMika Westerberg <mika.westerberg@linux.intel.com>2023-06-09 12:07:24 +0300
commit53ba2e16957b01eb7858e3ee5a3a8187a2892f15 (patch)
tree560427aa175bf95f9103d8314351818f7e271fdc /drivers/thunderbolt
parent4a420eb1426a237aaf105c9d040644785fc2c7fa (diff)
thunderbolt: Disable CL states when a DMA tunnel is established
Tunnels between hosts should not have CL states enabled because otherwise they might enter a low power state without the other end noticing which causes packets to be lost. For this reason disable all CL states upon first DMA tunnel creation. Once the last DMA tunnel is torn down we try to re-enable them. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Diffstat (limited to 'drivers/thunderbolt')
-rw-r--r--drivers/thunderbolt/clx.c2
-rw-r--r--drivers/thunderbolt/tb.c62
2 files changed, 58 insertions, 6 deletions
diff --git a/drivers/thunderbolt/clx.c b/drivers/thunderbolt/clx.c
index 4f0cfbb24dd9..604cceb23659 100644
--- a/drivers/thunderbolt/clx.c
+++ b/drivers/thunderbolt/clx.c
@@ -317,7 +317,7 @@ int tb_switch_clx_enable(struct tb_switch *sw, unsigned int clx)
struct tb_port *up, *down;
int ret;
- if (!clx)
+ if (!clx || sw->clx == clx)
return 0;
if (!validate_mask(clx))
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 1d056ff6d77f..aa6e11589c28 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -240,8 +240,11 @@ static void tb_discover_dp_resources(struct tb *tb)
}
}
+/* Enables CL states up to host router */
static int tb_enable_clx(struct tb_switch *sw)
{
+ struct tb_cm *tcm = tb_priv(sw->tb);
+ const struct tb_tunnel *tunnel;
int ret;
/*
@@ -251,10 +254,27 @@ static int tb_enable_clx(struct tb_switch *sw)
* this in the future to cover the whole topology if it turns
* out to be beneficial.
*/
+ while (sw && sw->config.depth > 1)
+ sw = tb_switch_parent(sw);
+
+ if (!sw)
+ return 0;
+
if (sw->config.depth != 1)
return 0;
/*
+ * If we are re-enabling then check if there is an active DMA
+ * tunnel and in that case bail out.
+ */
+ list_for_each_entry(tunnel, &tcm->tunnel_list, list) {
+ if (tb_tunnel_is_dma(tunnel)) {
+ if (tb_tunnel_port_on_path(tunnel, tb_upstream_port(sw)))
+ return 0;
+ }
+ }
+
+ /*
* CL0s and CL1 are enabled and supported together.
* Silently ignore CLx enabling in case CLx is not supported.
*/
@@ -262,6 +282,16 @@ static int tb_enable_clx(struct tb_switch *sw)
return ret == -EOPNOTSUPP ? 0 : ret;
}
+/* Disables CL states up to the host router */
+static void tb_disable_clx(struct tb_switch *sw)
+{
+ do {
+ if (tb_switch_clx_disable(sw) < 0)
+ tb_sw_warn(sw, "failed to disable CL states\n");
+ sw = tb_switch_parent(sw);
+ } while (sw);
+}
+
static int tb_increase_switch_tmu_accuracy(struct device *dev, void *data)
{
struct tb_switch *sw;
@@ -1470,30 +1500,45 @@ static int tb_approve_xdomain_paths(struct tb *tb, struct tb_xdomain *xd,
struct tb_port *nhi_port, *dst_port;
struct tb_tunnel *tunnel;
struct tb_switch *sw;
+ int ret;
sw = tb_to_switch(xd->dev.parent);
dst_port = tb_port_at(xd->route, sw);
nhi_port = tb_switch_find_port(tb->root_switch, TB_TYPE_NHI);
mutex_lock(&tb->lock);
+
+ /*
+ * When tunneling DMA paths the link should not enter CL states
+ * so disable them now.
+ */
+ tb_disable_clx(sw);
+
tunnel = tb_tunnel_alloc_dma(tb, nhi_port, dst_port, transmit_path,
transmit_ring, receive_path, receive_ring);
if (!tunnel) {
- mutex_unlock(&tb->lock);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_clx;
}
if (tb_tunnel_activate(tunnel)) {
tb_port_info(nhi_port,
"DMA tunnel activation failed, aborting\n");
- tb_tunnel_free(tunnel);
- mutex_unlock(&tb->lock);
- return -EIO;
+ ret = -EIO;
+ goto err_free;
}
list_add_tail(&tunnel->list, &tcm->tunnel_list);
mutex_unlock(&tb->lock);
return 0;
+
+err_free:
+ tb_tunnel_free(tunnel);
+err_clx:
+ tb_enable_clx(sw);
+ mutex_unlock(&tb->lock);
+
+ return ret;
}
static void __tb_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd,
@@ -1519,6 +1564,13 @@ static void __tb_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd,
receive_path, receive_ring))
tb_deactivate_and_free_tunnel(tunnel);
}
+
+ /*
+ * Try to re-enable CL states now, it is OK if this fails
+ * because we may still have another DMA tunnel active through
+ * the same host router USB4 downstream port.
+ */
+ tb_enable_clx(sw);
}
static int tb_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd,