diff options
| author | Dragos Bogdan <dragos.bogdan@analog.com> | 2020-12-21 17:29:35 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2020-12-28 14:21:31 +0000 |
| commit | d962608ce2188a1d46ec9d356d6fad5cd6fc0341 (patch) | |
| tree | e129ab2ad7f2227640351917584bbf0ebb65da6e /drivers/spi | |
| parent | f7005142dacea1769fba0152c493aaa61b33205c (diff) | |
spi: Add SPI_NO_TX/RX support
Transmit/receive only is a valid SPI mode. For example, the MOSI/TX line
might be missing from an ADC while for a DAC the MISO/RX line may be
optional. This patch adds these two new modes: SPI_NO_TX and
SPI_NO_RX. This way, the drivers will be able to identify if any of
these two lines is missing and to adjust the transfers accordingly.
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201221152936.53873-2-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi.c | 25 |
1 files changed, 20 insertions, 5 deletions
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 51d7c004fbab..ca75f4036eda 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1941,6 +1941,9 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, /* Device DUAL/QUAD mode */ if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) { switch (value) { + case 0: + spi->mode |= SPI_NO_TX; + break; case 1: break; case 2: @@ -1962,6 +1965,9 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) { switch (value) { + case 0: + spi->mode |= SPI_NO_RX; + break; case 1: break; case 2: @@ -3329,12 +3335,16 @@ int spi_setup(struct spi_device *spi) unsigned bad_bits, ugly_bits; int status; - /* check mode to prevent that DUAL and QUAD set at the same time + /* + * check mode to prevent that any two of DUAL, QUAD and NO_MOSI/MISO + * are set at the same time */ - if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) || - ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) { + if ((hweight_long(spi->mode & + (SPI_TX_DUAL | SPI_TX_QUAD | SPI_NO_TX)) > 1) || + (hweight_long(spi->mode & + (SPI_RX_DUAL | SPI_RX_QUAD | SPI_NO_RX)) > 1)) { dev_err(&spi->dev, - "setup: can not select dual and quad at the same time\n"); + "setup: can not select any two of dual, quad and no-rx/tx at the same time\n"); return -EINVAL; } /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden @@ -3348,7 +3358,8 @@ int spi_setup(struct spi_device *spi) * SPI_CS_WORD has a fallback software implementation, * so it is ignored here. */ - bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD); + bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD | + SPI_NO_TX | SPI_NO_RX); /* nothing prevents from working with active-high CS in case if it * is driven by GPIO. */ @@ -3610,6 +3621,8 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) * 2. check tx/rx_nbits match the mode in spi_device */ if (xfer->tx_buf) { + if (spi->mode & SPI_NO_TX) + return -EINVAL; if (xfer->tx_nbits != SPI_NBITS_SINGLE && xfer->tx_nbits != SPI_NBITS_DUAL && xfer->tx_nbits != SPI_NBITS_QUAD) @@ -3623,6 +3636,8 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) } /* check transfer rx_nbits */ if (xfer->rx_buf) { + if (spi->mode & SPI_NO_RX) + return -EINVAL; if (xfer->rx_nbits != SPI_NBITS_SINGLE && xfer->rx_nbits != SPI_NBITS_DUAL && xfer->rx_nbits != SPI_NBITS_QUAD) |