scsi: Suppress a kernel warning in case the prep function returns BLKPREP_DEFER

The legacy block layer handles requests as follows:
- If the prep function returns BLKPREP_OK, let blk_peek_request()
  return the pointer to that request.
- If the prep function returns BLKPREP_DEFER, keep the RQF_STARTED
  flag and retry calling the prep function later.
- If the prep function returns BLKPREP_KILL or BLKPREP_INVALID, end
  the request.

In none of these cases it is correct to clear the SCMD_INITIALIZED
flag from inside scsi_prep_fn(). Since scsi_prep_fn() already
guarantees that scsi_init_command() will be called once even if
scsi_prep_fn() is called multiple times, remove the code that clears
SCMD_INITIALIZED from scsi_prep_fn().

The scsi-mq code handles requests as follows:
- If scsi_mq_prep_fn() returns BLKPREP_OK, set the RQF_DONTPREP flag
  and submit the request to the SCSI LLD.
- If scsi_mq_prep_fn() returns BLKPREP_DEFER, call
  blk_mq_delay_run_hw_queue() and return BLK_STS_RESOURCE.
- If the prep function returns BLKPREP_KILL or BLKPREP_INVALID, call
  scsi_mq_uninit_cmd() and let the blk-mq core end the request.

In none of these cases scsi_mq_prep_fn() should clear the
SCMD_INITIALIZED flag. Hence remove the code from scsi_mq_prep_fn()
function that clears that flag.

This patch avoids that the following warning is triggered when using
the legacy block layer:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 4198 at drivers/scsi/scsi_lib.c:654 scsi_end_request+0x1de/0x220
CPU: 1 PID: 4198 Comm: mkfs.f2fs Not tainted 4.14.0-rc5+ #1
task: ffff91c147a4b800 task.stack: ffffb282c37b8000
RIP: 0010:scsi_end_request+0x1de/0x220
Call Trace:
<IRQ>
scsi_io_completion+0x204/0x5e0
scsi_finish_command+0xce/0xe0
scsi_softirq_done+0x126/0x130
blk_done_softirq+0x6e/0x80
__do_softirq+0xcf/0x2a8
irq_exit+0xab/0xb0
do_IRQ+0x7b/0xc0
common_interrupt+0x90/0x90
</IRQ>
RIP: 0010:_raw_spin_unlock_irqrestore+0x9/0x10
__test_set_page_writeback+0xc7/0x2c0
__block_write_full_page+0x158/0x3b0
block_write_full_page+0xc4/0xd0
blkdev_writepage+0x13/0x20
__writepage+0x12/0x40
write_cache_pages+0x204/0x500
generic_writepages+0x48/0x70
blkdev_writepages+0x9/0x10
do_writepages+0x34/0xc0
__filemap_fdatawrite_range+0x6c/0x90
file_write_and_wait_range+0x31/0x90
blkdev_fsync+0x16/0x40
vfs_fsync_range+0x44/0xa0
do_fsync+0x38/0x60
SyS_fsync+0xb/0x10
entry_SYSCALL_64_fastpath+0x13/0x94
---[ end trace 86e8ef85a4a6c1d1 ]---

Fixes: commit 64104f703212 ("scsi: Call scsi_initialize_rq() for filesystem requests")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 1 insertions, 7 deletions

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9cf6a80fe297..ad3ea24f0885 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1379,8 +1379,6 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
 
 	ret = scsi_setup_cmnd(sdev, req);
 out:
-	if (ret != BLKPREP_OK)
-		cmd->flags &= ~SCMD_INITIALIZED;
 	return scsi_prep_return(q, req, ret);
 }
 
@@ -1900,7 +1898,6 @@ static int scsi_mq_prep_fn(struct request *req)
 	struct scsi_device *sdev = req->q->queuedata;
 	struct Scsi_Host *shost = sdev->host;
 	struct scatterlist *sg;
-	int ret;
 
 	scsi_init_command(sdev, cmd);
 
@@ -1934,10 +1931,7 @@ static int scsi_mq_prep_fn(struct request *req)
 
 	blk_mq_start_request(req);
 
-	ret = scsi_setup_cmnd(sdev, req);
-	if (ret != BLK_STS_OK)
-		cmd->flags &= ~SCMD_INITIALIZED;
-	return ret;
+	return scsi_setup_cmnd(sdev, req);
 }
 
 static void scsi_mq_done(struct scsi_cmnd *cmd)