diff options
| author | Liu Ying <victor.liu@nxp.com> | 2022-01-24 10:40:07 +0800 |
|---|---|---|
| committer | Vinod Koul <vkoul@kernel.org> | 2022-02-02 10:33:04 +0530 |
| commit | 9a8406ba1a9a2965c27e0db1d7753471d12ee9ff (patch) | |
| tree | 2fceeab99e34a3b57eb2f930866ff402ea2fa372 /drivers/phy/phy-core-mipi-dphy.c | |
| parent | 46e994717807f4b935c44d81dde9dd8bcd9a4f5d (diff) | |
phy: dphy: Correct clk_pre parameter
The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE
parameter's unit is Unit Interval(UI) and the minimum value is 8. Also,
kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy
mentions that it should be in UI. However, the dphy core driver wrongly
sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds.
So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE
parameter's minimum value according to the D-PHY specification.
I'm assuming that all impacted custom drivers shall program values in
TxByteClkHS cycles into hardware for the T-CLK-PRE parameter. The D-PHY
specification mentions that the frequency of TxByteClkHS is exactly 1/8
the High-Speed(HS) bit rate(each HS bit consumes one UI). So, relevant
custom driver code is changed to program those values as
DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then.
Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.
Fixes: 2ed869990e14 ("phy: Add MIPI D-PHY configuration options")
Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/phy/phy-core-mipi-dphy.c')
| -rw-r--r-- | drivers/phy/phy-core-mipi-dphy.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c index 288c9c67aa74..ccb4045685cd 100644 --- a/drivers/phy/phy-core-mipi-dphy.c +++ b/drivers/phy/phy-core-mipi-dphy.c @@ -36,7 +36,7 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock, cfg->clk_miss = 0; cfg->clk_post = 60000 + 52 * ui; - cfg->clk_pre = 8000; + cfg->clk_pre = 8; cfg->clk_prepare = 38000; cfg->clk_settle = 95000; cfg->clk_term_en = 0; @@ -97,7 +97,7 @@ int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg) if (cfg->clk_post < (60000 + 52 * ui)) return -EINVAL; - if (cfg->clk_pre < 8000) + if (cfg->clk_pre < 8) return -EINVAL; if (cfg->clk_prepare < 38000 || cfg->clk_prepare > 95000) |