Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "Core:

   - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
     default value allows for better BIG TCP performances

   - Reduce compound page head access for zero-copy data transfers

   - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
     possible

   - Threaded NAPI improvements, adding defer skb free support and
     unneeded softirq avoidance

   - Address dst_entry reference count scalability issues, via false
     sharing avoidance and optimize refcount tracking

   - Add lockless accesses annotation to sk_err[_soft]

   - Optimize again the skb struct layout

   - Extends the skb drop reasons to make it usable by multiple
     subsystems

   - Better const qualifier awareness for socket casts

  BPF:

   - Add skb and XDP typed dynptrs which allow BPF programs for more
     ergonomic and less brittle iteration through data and
     variable-sized accesses

   - Add a new BPF netfilter program type and minimal support to hook
     BPF programs to netfilter hooks such as prerouting or forward

   - Add more precise memory usage reporting for all BPF map types

   - Adds support for using {FOU,GUE} encap with an ipip device
     operating in collect_md mode and add a set of BPF kfuncs for
     controlling encap params

   - Allow BPF programs to detect at load time whether a particular
     kfunc exists or not, and also add support for this in light
     skeleton

   - Bigger batch of BPF verifier improvements to prepare for upcoming
     BPF open-coded iterators allowing for less restrictive looping
     capabilities

   - Rework RCU enforcement in the verifier, add kptr_rcu and enforce
     BPF programs to NULL-check before passing such pointers into kfunc

   - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
     in local storage maps

   - Enable RCU semantics for task BPF kptrs and allow referenced kptr
     tasks to be stored in BPF maps

   - Add support for refcounted local kptrs to the verifier for allowing
     shared ownership, useful for adding a node to both the BPF list and
     rbtree

   - Add BPF verifier support for ST instructions in
     convert_ctx_access() which will help new -mcpu=v4 clang flag to
     start emitting them

   - Add ARM32 USDT support to libbpf

   - Improve bpftool's visual program dump which produces the control
     flow graph in a DOT format by adding C source inline annotations

  Protocols:

   - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
     indicates the provenance of the IP address

   - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

   - Add the handshake upcall mechanism, allowing the user-space to
     implement generic TLS handshake on kernel's behalf

   - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
     resilience to nodes failures

   - SCTP: add support for Fair Capacity and Weighted Fair Queueing
     schedulers

   - MPTCP: delay first subflow allocation up to its first usage. This
     will allow for later better LSM interaction

   - xfrm: Remove inner/outer modes from input/output path. These are
     not needed anymore

   - WiFi:
      - reduced neighbor report (RNR) handling for AP mode
      - HW timestamping support
      - support for randomized auth/deauth TA for PASN privacy
      - per-link debugfs for multi-link
      - TC offload support for mac80211 drivers
      - mac80211 mesh fast-xmit and fast-rx support
      - enable Wi-Fi 7 (EHT) mesh support

  Netfilter:

   - Add nf_tables 'brouting' support, to force a packet to be routed
     instead of being bridged

   - Update bridge netfilter and ovs conntrack helpers to handle IPv6
     Jumbo packets properly, i.e. fetch the packet length from
     hop-by-hop extension header. This is needed for BIT TCP support

   - The iptables 32bit compat interface isn't compiled in by default
     anymore

   - Move ip(6)tables builtin icmp matches to the udptcp one. This has
     the advantage that icmp/icmpv6 match doesn't load the
     iptables/ip6tables modules anymore when iptables-nft is used

   - Extended netlink error report for netdevice in flowtables and
     netdev/chains. Allow for incrementally add/delete devices to netdev
     basechain. Allow to create netdev chain without device

  Driver API:

   - Remove redundant Device Control Error Reporting Enable, as PCI core
     has already error reporting enabled at enumeration time

   - Move Multicast DB netlink handlers to core, allowing devices other
     then bridge to use them

   - Allow the page_pool to directly recycle the pages from safely
     localized NAPI

   - Implement lockless TX queue stop/wake combo macros, allowing for
     further code de-duplication and sanitization

   - Add YNL support for user headers and struct attrs

   - Add partial YNL specification for devlink

   - Add partial YNL specification for ethtool

   - Add tc-mqprio and tc-taprio support for preemptible traffic classes

   - Add tx push buf len param to ethtool, specifies the maximum number
     of bytes of a transmitted packet a driver can push directly to the
     underlying device

   - Add basic LED support for switch/phy

   - Add NAPI documentation, stop relaying on external links

   - Convert dsa_master_ioctl() to netdev notifier. This is a
     preparatory work to make the hardware timestamping layer selectable
     by user space

   - Add transceiver support and improve the error messages for CAN-FD
     controllers

  New hardware / drivers:

   - Ethernet:
      - AMD/Pensando core device support
      - MediaTek MT7981 SoC
      - MediaTek MT7988 SoC
      - Broadcom BCM53134 embedded switch
      - Texas Instruments CPSW9G ethernet switch
      - Qualcomm EMAC3 DWMAC ethernet
      - StarFive JH7110 SoC
      - NXP CBTX ethernet PHY

   - WiFi:
      - Apple M1 Pro/Max devices
      - RealTek rtl8710bu/rtl8188gu
      - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

   - Bluetooth:
      - Realtek RTL8821CS, RTL8851B, RTL8852BS
      - Mediatek MT7663, MT7922
      - NXP w8997
      - Actions Semi ATS2851
      - QTI WCN6855
      - Marvell 88W8997

   - Can:
      - STMicroelectronics bxcan stm32f429

  Drivers:

   - Ethernet NICs:
      - Intel (1G, icg):
         - add tracking and reporting of QBV config errors
         - add support for configuring max SDU for each Tx queue
      - Intel (100G, ice):
         - refactor mailbox overflow detection to support Scalable IOV
         - GNSS interface optimization
      - Intel (i40e):
         - support XDP multi-buffer
      - nVidia/Mellanox:
         - add the support for linux bridge multicast offload
         - enable TC offload for egress and engress MACVLAN over bond
         - add support for VxLAN GBP encap/decap flows offload
         - extend packet offload to fully support libreswan
         - support tunnel mode in mlx5 IPsec packet offload
         - extend XDP multi-buffer support
         - support MACsec VLAN offload
         - add support for dynamic msix vectors allocation
         - drop RX page_cache and fully use page_pool
         - implement thermal zone to report NIC temperature
      - Netronome/Corigine:
         - add support for multi-zone conntrack offload
      - Solarflare/Xilinx:
         - support offloading TC VLAN push/pop actions to the MAE
         - support TC decap rules
         - support unicast PTP

   - Other NICs:
      - Broadcom (bnxt): enforce software based freq adjustments only on
        shared PHC NIC
      - RealTek (r8169): refactor to addess ASPM issues during NAPI poll
      - Micrel (lan8841): add support for PTP_PF_PEROUT
      - Cadence (macb): enable PTP unicast
      - Engleder (tsnep): add XDP socket zero-copy support
      - virtio-net: implement exact header length guest feature
      - veth: add page_pool support for page recycling
      - vxlan: add MDB data path support
      - gve: add XDP support for GQI-QPL format
      - geneve: accept every ethertype
      - macvlan: allow some packets to bypass broadcast queue
      - mana: add support for jumbo frame

   - Ethernet high-speed switches:
      - Microchip (sparx5): Add support for TC flower templates

   - Ethernet embedded switches:
      - Broadcom (b54):
         - configure 6318 and 63268 RGMII ports
      - Marvell (mv88e6xxx):
         - faster C45 bus scan
      - Microchip:
         - lan966x:
            - add support for IS1 VCAP
            - better TX/RX from/to CPU performances
         - ksz9477: add ETS Qdisc support
         - ksz8: enhance static MAC table operations and error handling
         - sama7g5: add PTP capability
      - NXP (ocelot):
         - add support for external ports
         - add support for preemptible traffic classes
      - Texas Instruments:
         - add CPSWxG SGMII support for J7200 and J721E

   - Intel WiFi (iwlwifi):
      - preparation for Wi-Fi 7 EHT and multi-link support
      - EHT (Wi-Fi 7) sniffer support
      - hardware timestamping support for some devices/firwmares
      - TX beacon protection on newer hardware

   - Qualcomm 802.11ax WiFi (ath11k):
      - MU-MIMO parameters support
      - ack signal support for management packets

   - RealTek WiFi (rtw88):
      - SDIO bus support
      - better support for some SDIO devices (e.g. MAC address from
        efuse)

   - RealTek WiFi (rtw89):
      - HW scan support for 8852b
      - better support for 6 GHz scanning
      - support for various newer firmware APIs
      - framework firmware backwards compatibility

   - MediaTek WiFi (mt76):
      - P2P support
      - mesh A-MSDU support
      - EHT (Wi-Fi 7) support
      - coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
  net: phy: hide the PHYLIB_LEDS knob
  net: phy: marvell-88x2222: remove unnecessary (void*) conversions
  tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
  net: amd: Fix link leak when verifying config failed
  net: phy: marvell: Fix inconsistent indenting in led_blink_set
  lan966x: Don't use xdp_frame when action is XDP_TX
  tsnep: Add XDP socket zero-copy TX support
  tsnep: Add XDP socket zero-copy RX support
  tsnep: Move skb receive action to separate function
  tsnep: Add functions for queue enable/disable
  tsnep: Rework TX/RX queue initialization
  tsnep: Replace modulo operation with mask
  net: phy: dp83867: Add led_brightness_set support
  net: phy: Fix reading LED reg property
  drivers: nfc: nfcsim: remove return value check of `dev_dir`
  net: phy: dp83867: Remove unnecessary (void*) conversions
  net: ethtool: coalesce: try to make user settings stick twice
  net: mana: Check if netdev/napi_alloc_frag returns single page
  net: mana: Rename mana_refill_rxoob and remove some empty lines
  net: veth: add page_pool stats
  ...

1 files changed, 178 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtw88/sdio.h b/drivers/net/wireless/realtek/rtw88/sdio.h
new file mode 100644
index 000000000000..3c659ed180f0
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/sdio.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/* Copyright (C) 2021 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (C) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
+ */
+
+#ifndef __REG_SDIO_H_
+#define __REG_SDIO_H_
+
+/* I/O bus domain address mapping */
+#define SDIO_LOCAL_OFFSET			0x10250000
+#define WLAN_IOREG_OFFSET			0x10260000
+#define FIRMWARE_FIFO_OFFSET			0x10270000
+#define TX_HIQ_OFFSET				0x10310000
+#define TX_MIQ_OFFSET				0x10320000
+#define TX_LOQ_OFFSET				0x10330000
+#define TX_EPQ_OFFSET				0x10350000
+#define RX_RX0FF_OFFSET				0x10340000
+
+#define RTW_SDIO_BUS_MSK			0xffff0000
+#define SDIO_LOCAL_REG_MSK			0x00000fff
+#define WLAN_IOREG_REG_MSK			0x0000ffff
+
+/* SDIO Tx Control */
+#define REG_SDIO_TX_CTRL			(SDIO_LOCAL_OFFSET + 0x0000)
+
+/*SDIO status timeout*/
+#define REG_SDIO_TIMEOUT			(SDIO_LOCAL_OFFSET + 0x0002)
+
+/* SDIO Host Interrupt Mask */
+#define REG_SDIO_HIMR				(SDIO_LOCAL_OFFSET + 0x0014)
+#define REG_SDIO_HIMR_RX_REQUEST		BIT(0)
+#define REG_SDIO_HIMR_AVAL			BIT(1)
+#define REG_SDIO_HIMR_TXERR			BIT(2)
+#define REG_SDIO_HIMR_RXERR			BIT(3)
+#define REG_SDIO_HIMR_TXFOVW			BIT(4)
+#define REG_SDIO_HIMR_RXFOVW			BIT(5)
+#define REG_SDIO_HIMR_TXBCNOK			BIT(6)
+#define REG_SDIO_HIMR_TXBCNERR			BIT(7)
+#define REG_SDIO_HIMR_BCNERLY_INT		BIT(16)
+#define REG_SDIO_HIMR_C2HCMD			BIT(17)
+#define REG_SDIO_HIMR_CPWM1			BIT(18)
+#define REG_SDIO_HIMR_CPWM2			BIT(19)
+#define REG_SDIO_HIMR_HSISR_IND			BIT(20)
+#define REG_SDIO_HIMR_GTINT3_IND		BIT(21)
+#define REG_SDIO_HIMR_GTINT4_IND		BIT(22)
+#define REG_SDIO_HIMR_PSTIMEOUT			BIT(23)
+#define REG_SDIO_HIMR_OCPINT			BIT(24)
+#define REG_SDIO_HIMR_ATIMEND			BIT(25)
+#define REG_SDIO_HIMR_ATIMEND_E			BIT(26)
+#define REG_SDIO_HIMR_CTWEND			BIT(27)
+/* the following two are RTL8188 SDIO Specific */
+#define REG_SDIO_HIMR_MCU_ERR			BIT(28)
+#define REG_SDIO_HIMR_TSF_BIT32_TOGGLE		BIT(29)
+
+/* SDIO Host Interrupt Service Routine */
+#define REG_SDIO_HISR				(SDIO_LOCAL_OFFSET + 0x0018)
+#define REG_SDIO_HISR_RX_REQUEST		BIT(0)
+#define REG_SDIO_HISR_AVAL			BIT(1)
+#define REG_SDIO_HISR_TXERR			BIT(2)
+#define REG_SDIO_HISR_RXERR			BIT(3)
+#define REG_SDIO_HISR_TXFOVW			BIT(4)
+#define REG_SDIO_HISR_RXFOVW			BIT(5)
+#define REG_SDIO_HISR_TXBCNOK			BIT(6)
+#define REG_SDIO_HISR_TXBCNERR			BIT(7)
+#define REG_SDIO_HISR_BCNERLY_INT		BIT(16)
+#define REG_SDIO_HISR_C2HCMD			BIT(17)
+#define REG_SDIO_HISR_CPWM1			BIT(18)
+#define REG_SDIO_HISR_CPWM2			BIT(19)
+#define REG_SDIO_HISR_HSISR_IND			BIT(20)
+#define REG_SDIO_HISR_GTINT3_IND		BIT(21)
+#define REG_SDIO_HISR_GTINT4_IND		BIT(22)
+#define REG_SDIO_HISR_PSTIMEOUT			BIT(23)
+#define REG_SDIO_HISR_OCPINT			BIT(24)
+#define REG_SDIO_HISR_ATIMEND			BIT(25)
+#define REG_SDIO_HISR_ATIMEND_E			BIT(26)
+#define REG_SDIO_HISR_CTWEND			BIT(27)
+/* the following two are RTL8188 SDIO Specific */
+#define REG_SDIO_HISR_MCU_ERR			BIT(28)
+#define REG_SDIO_HISR_TSF_BIT32_TOGGLE		BIT(29)
+
+/* HCI Current Power Mode */
+#define REG_SDIO_HCPWM				(SDIO_LOCAL_OFFSET + 0x0019)
+/* RXDMA Request Length */
+#define REG_SDIO_RX0_REQ_LEN			(SDIO_LOCAL_OFFSET + 0x001C)
+/* OQT Free Page */
+#define REG_SDIO_OQT_FREE_PG			(SDIO_LOCAL_OFFSET + 0x001E)
+/* Free Tx Buffer Page */
+#define REG_SDIO_FREE_TXPG			(SDIO_LOCAL_OFFSET + 0x0020)
+/* HCI Current Power Mode 1 */
+#define REG_SDIO_HCPWM1				(SDIO_LOCAL_OFFSET + 0x0024)
+/* HCI Current Power Mode 2 */
+#define REG_SDIO_HCPWM2				(SDIO_LOCAL_OFFSET + 0x0026)
+/* Free Tx Page Sequence */
+#define REG_SDIO_FREE_TXPG_SEQ			(SDIO_LOCAL_OFFSET + 0x0028)
+/* HTSF Information */
+#define REG_SDIO_HTSFR_INFO			(SDIO_LOCAL_OFFSET + 0x0030)
+#define REG_SDIO_HCPWM1_V2			(SDIO_LOCAL_OFFSET + 0x0038)
+/* H2C */
+#define REG_SDIO_H2C				(SDIO_LOCAL_OFFSET + 0x0060)
+/* HCI Request Power Mode 1 */
+#define REG_SDIO_HRPWM1				(SDIO_LOCAL_OFFSET + 0x0080)
+/* HCI Request Power Mode 2 */
+#define REG_SDIO_HRPWM2				(SDIO_LOCAL_OFFSET + 0x0082)
+/* HCI Power Save Clock */
+#define REG_SDIO_HPS_CLKR			(SDIO_LOCAL_OFFSET + 0x0084)
+/* SDIO HCI Suspend Control */
+#define REG_SDIO_HSUS_CTRL			(SDIO_LOCAL_OFFSET + 0x0086)
+#define BIT_HCI_SUS_REQ				BIT(0)
+#define BIT_HCI_RESUME_RDY			BIT(1)
+/* SDIO Host Extension Interrupt Mask Always */
+#define REG_SDIO_HIMR_ON			(SDIO_LOCAL_OFFSET + 0x0090)
+/* SDIO Host Extension Interrupt Status Always */
+#define REG_SDIO_HISR_ON			(SDIO_LOCAL_OFFSET + 0x0091)
+
+#define REG_SDIO_INDIRECT_REG_CFG		(SDIO_LOCAL_OFFSET + 0x0040)
+#define BIT_SDIO_INDIRECT_REG_CFG_WORD		BIT(16)
+#define BIT_SDIO_INDIRECT_REG_CFG_DWORD		BIT(17)
+#define BIT_SDIO_INDIRECT_REG_CFG_WRITE		BIT(18)
+#define BIT_SDIO_INDIRECT_REG_CFG_READ		BIT(19)
+#define BIT_SDIO_INDIRECT_REG_CFG_UNK20		BIT(20)
+#define REG_SDIO_INDIRECT_REG_DATA		(SDIO_LOCAL_OFFSET + 0x0044)
+
+/* Sdio Address for SDIO Local Reg, TRX FIFO, MAC Reg */
+#define REG_SDIO_CMD_ADDR_MSK			GENMASK(16, 13)
+#define REG_SDIO_CMD_ADDR_SDIO_REG		0
+#define REG_SDIO_CMD_ADDR_MAC_REG		8
+#define REG_SDIO_CMD_ADDR_TXFF_HIGH		4
+#define REG_SDIO_CMD_ADDR_TXFF_LOW		6
+#define REG_SDIO_CMD_ADDR_TXFF_NORMAL		5
+#define REG_SDIO_CMD_ADDR_TXFF_EXTRA		7
+#define REG_SDIO_CMD_ADDR_RXFF			7
+
+#define RTW_SDIO_BLOCK_SIZE			512
+#define RTW_SDIO_ADDR_RX_RX0FF_GEN(_id)		(0x0e000 | ((_id) & 0x3))
+
+#define RTW_SDIO_DATA_PTR_ALIGN			8
+
+struct sdio_func;
+struct sdio_device_id;
+
+struct rtw_sdio_tx_data {
+	u8 sn;
+};
+
+struct rtw_sdio_work_data {
+	struct work_struct work;
+	struct rtw_dev *rtwdev;
+};
+
+struct rtw_sdio {
+	struct sdio_func *sdio_func;
+
+	u32 irq_mask;
+	u8 rx_addr;
+	bool sdio3_bus_mode;
+
+	void *irq_thread;
+
+	struct workqueue_struct *txwq;
+	struct rtw_sdio_work_data *tx_handler_data;
+	struct sk_buff_head tx_queue[RTK_MAX_TX_QUEUE_NUM];
+};
+
+extern const struct dev_pm_ops rtw_sdio_pm_ops;
+
+int rtw_sdio_probe(struct sdio_func *sdio_func,
+		   const struct sdio_device_id *id);
+void rtw_sdio_remove(struct sdio_func *sdio_func);
+void rtw_sdio_shutdown(struct device *dev);
+
+static inline bool rtw_sdio_is_sdio30_supported(struct rtw_dev *rtwdev)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+
+	return rtwsdio->sdio3_bus_mode;
+}
+
+#endif