summaryrefslogtreecommitdiff
path: root/drivers/misc/eeprom
diff options
context:
space:
mode:
authorRalph Siemsen <ralph.siemsen@linaro.org>2021-11-08 13:16:27 -0500
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2021-12-03 14:19:54 +0100
commit9a626577398c24ecab63c0a684436c8928092367 (patch)
tree21b9bd1012ab3637f6d1f4ae3cb7603c662665ba /drivers/misc/eeprom
parent3a1bf591e9a410f220b7405a142a47407394a1d5 (diff)
nvmem: eeprom: at25: fix FRAM byte_len
Commit fd307a4ad332 ("nvmem: prepare basics for FRAM support") added support for FRAM devices such as the Cypress FM25V. During testing, it was found that the FRAM detects properly, however reads and writes fail. Upon further investigation, two problem were found in at25_probe() routine. 1) In the case of an FRAM device without platform data, eg. fram == true && spi->dev.platform_data == NULL the stack local variable "struct spi_eeprom chip" is not initialized fully, prior to being copied into at25->chip. The chip.flags field in particular can cause problems. 2) The byte_len of FRAM is computed from its ID register, and is stored into the stack local "struct spi_eeprom chip" structure. This happens after the same structure has been copied into at25->chip. As a result, at25->chip.byte_len does not contain the correct length of the device. In turn this can cause checks at beginning of at25_ee_read() to fail (or equally, it could allow reads beyond the end of the device length). Fix both of these issues by eliminating the on-stack struct spi_eeprom. Instead use the one inside at25_data structure, which starts of zeroed. Fixes: fd307a4ad332 ("nvmem: prepare basics for FRAM support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Link: https://lore.kernel.org/r/20211108181627.645638-1-ralph.siemsen@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/misc/eeprom')
-rw-r--r--drivers/misc/eeprom/at25.c38
1 files changed, 18 insertions, 20 deletions
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 632325474233..b38978a3b3ff 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -376,7 +376,6 @@ MODULE_DEVICE_TABLE(spi, at25_spi_ids);
static int at25_probe(struct spi_device *spi)
{
struct at25_data *at25 = NULL;
- struct spi_eeprom chip;
int err;
int sr;
u8 id[FM25_ID_LEN];
@@ -389,15 +388,18 @@ static int at25_probe(struct spi_device *spi)
if (match && !strcmp(match->compatible, "cypress,fm25"))
is_fram = 1;
+ at25 = devm_kzalloc(&spi->dev, sizeof(struct at25_data), GFP_KERNEL);
+ if (!at25)
+ return -ENOMEM;
+
/* Chip description */
- if (!spi->dev.platform_data) {
- if (!is_fram) {
- err = at25_fw_to_chip(&spi->dev, &chip);
- if (err)
- return err;
- }
- } else
- chip = *(struct spi_eeprom *)spi->dev.platform_data;
+ if (spi->dev.platform_data) {
+ memcpy(&at25->chip, spi->dev.platform_data, sizeof(at25->chip));
+ } else if (!is_fram) {
+ err = at25_fw_to_chip(&spi->dev, &at25->chip);
+ if (err)
+ return err;
+ }
/* Ping the chip ... the status register is pretty portable,
* unlike probing manufacturer IDs. We do expect that system
@@ -409,12 +411,7 @@ static int at25_probe(struct spi_device *spi)
return -ENXIO;
}
- at25 = devm_kzalloc(&spi->dev, sizeof(struct at25_data), GFP_KERNEL);
- if (!at25)
- return -ENOMEM;
-
mutex_init(&at25->lock);
- at25->chip = chip;
at25->spi = spi;
spi_set_drvdata(spi, at25);
@@ -431,7 +428,7 @@ static int at25_probe(struct spi_device *spi)
dev_err(&spi->dev, "Error: unsupported size (id %02x)\n", id[7]);
return -ENODEV;
}
- chip.byte_len = int_pow(2, id[7] - 0x21 + 4) * 1024;
+ at25->chip.byte_len = int_pow(2, id[7] - 0x21 + 4) * 1024;
if (at25->chip.byte_len > 64 * 1024)
at25->chip.flags |= EE_ADDR3;
@@ -464,7 +461,7 @@ static int at25_probe(struct spi_device *spi)
at25->nvmem_config.type = is_fram ? NVMEM_TYPE_FRAM : NVMEM_TYPE_EEPROM;
at25->nvmem_config.name = dev_name(&spi->dev);
at25->nvmem_config.dev = &spi->dev;
- at25->nvmem_config.read_only = chip.flags & EE_READONLY;
+ at25->nvmem_config.read_only = at25->chip.flags & EE_READONLY;
at25->nvmem_config.root_only = true;
at25->nvmem_config.owner = THIS_MODULE;
at25->nvmem_config.compat = true;
@@ -474,17 +471,18 @@ static int at25_probe(struct spi_device *spi)
at25->nvmem_config.priv = at25;
at25->nvmem_config.stride = 1;
at25->nvmem_config.word_size = 1;
- at25->nvmem_config.size = chip.byte_len;
+ at25->nvmem_config.size = at25->chip.byte_len;
at25->nvmem = devm_nvmem_register(&spi->dev, &at25->nvmem_config);
if (IS_ERR(at25->nvmem))
return PTR_ERR(at25->nvmem);
dev_info(&spi->dev, "%d %s %s %s%s, pagesize %u\n",
- (chip.byte_len < 1024) ? chip.byte_len : (chip.byte_len / 1024),
- (chip.byte_len < 1024) ? "Byte" : "KByte",
+ (at25->chip.byte_len < 1024) ?
+ at25->chip.byte_len : (at25->chip.byte_len / 1024),
+ (at25->chip.byte_len < 1024) ? "Byte" : "KByte",
at25->chip.name, is_fram ? "fram" : "eeprom",
- (chip.flags & EE_READONLY) ? " (readonly)" : "",
+ (at25->chip.flags & EE_READONLY) ? " (readonly)" : "",
at25->chip.page_size);
return 0;
}